Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 44,58,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_86529_1Bid Award Id
ViewTender No
OSD C.E. (B) - 53 / 2022-23Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
PATHWAY
619.44
-
-
... More
DRAIN
396
-
-
... More
BOUNDARY WALL
250.25
-
-
... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 1st Extra lift of 1.5m (upto 7.5m)
-
-
-
... More
Building Proper
5070.94
-
-
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
-
-
-
... More
Building Proper
2077.85
-
-
... More
Security Shed
15.87
-
-
... More
DRAIN
132
-
-
... More
BOUNDARY WALL
83.42
-
-
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.
-
-
-
... More
Building Proper
2729.45
-
-
... More
Security Shed
17.66
-
-
... More
PATHWAY
137.65
-
-
... More
DRAIN
36
-
-
... More
PARKING
23.88
-
-
... More
BOUNDARY WALL
28.88
-
-
... More
Disposal of excavated surplus earth from the worksite by mechanical means within a lead of 5Km including loading and unloading etc. complete. in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
4848.31
-
-
... More
Security Shed
33.44
-
-
... More
DRAIN
264
-
-
... More
BOUNDARY WALL
166.83
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
289.5
-
-
... More
Security Shed
17.66
-
-
... More
DRAIN
36
-
-
... More
BOUNDARY WALL
28.88
-
-
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
-
-
-
... More
Building Proper
1177.4
-
-
... More
Security Shed
12.73
-
-
... More
R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Raft Footing
1766.1
-
-
... More
Column up to Plinth
95.4
-
-
... More
Plinth beam
71.8
-
-
... More
Wall
10.5
-
-
... More
COLUMN IN SUPERSTRUCTURE
-
-
-
... More
GROUND FLOOR
88.58
-
-
... More
1ST FL
88.58
-
-
... More
2ND FL
88.58
-
-
... More
3RD FL
88.58
-
-
... More
4TH FL
88.58
-
-
... More
5TH FL
88.58
-
-
... More
6TH FL
88.58
-
-
... More
7TH FL
88.58
-
-
... More
8TH FL
109.02
-
-
... More
Terrace Floor
38.77
-
-
... More
STAIRCASE
-
-
-
... More
GROUND FLOOR
14.06
-
-
... More
1ST FL
10.78
-
-
... More
2ND FL
10.78
-
-
... More
3RD FL
10.78
-
-
... More
4TH FL
10.78
-
-
... More
5TH FL
10.78
-
-
... More
6TH FL
10.78
-
-
... More
7TH FL
10.78
-
-
... More
8TH FL
8.78
-
-
... More
ROOF BEAM
-
-
-
... More
GROUND FLOOR
65.86
-
-
... More
1ST FL
68.55
-
-
... More
2ND FL
68.55
-
-
... More
3RD FL
72.43
-
-
... More
4TH FL
72.43
-
-
... More
5TH FL
72.43
-
-
... More
6TH FL
72.43
-
-
... More
7TH FL
98.84
-
-
... More
8TH FL
90.21
-
-
... More
Terrace Floor
12.13
-
-
... More
LINTEL
-
-
-
... More
GROUND FLOOR
9.87
-
-
... More
IST FL
14.88
-
-
... More
2ND FL
14.88
-
-
... More
3RD FL
10.63
-
-
... More
4TH FL
10.63
-
-
... More
5TH FL
10.63
-
-
... More
6TH FL
10.63
-
-
... More
7TH FL
12.33
-
-
... More
8TH FL
11.75
-
-
... More
TERRACE FLOOR
1.25
-
-
... More
SILL
-
-
-
... More
GROUND FLOOR
1.56
-
-
... More
IST FL
2.36
-
-
... More
2ND FL
2.36
-
-
... More
3RD FL
2.36
-
-
... More
4TH FL
2.36
-
-
... More
5TH FL
2.36
-
-
... More
6TH FL
2.36
-
-
... More
7TH FL
2.42
-
-
... More
8TH FL
1.55
-
-
... More
TERRACE FLOOR
0.2
-
-
... More
ROOF SLAB
-
-
-
... More
GROUND FLOOR
93.48
-
-
... More
1ST FL
93.48
-
-
... More
2ND FL
93.48
-
-
... More
3RD FL
93.48
-
-
... More
4TH FL
93.48
-
-
... More
5TH FL
93.48
-
-
... More
6TH FL
93.48
-
-
... More
7TH FL
93.48
-
-
... More
8TH FL
93.48
-
-
... More
Terrace Floor
16.96
-
-
... More
CHAJJA
-
-
-
... More
IST FL
96.28
-
-
... More
2ND FL
96.28
-
-
... More
3RD FL
96.28
-
-
... More
4TH FL
96.28
-
-
... More
5TH FL
96.28
-
-
... More
6TH FL
96.28
-
-
... More
7TH FL
96.28
-
-
... More
8TH FL
96.28
-
-
... More
R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
... More
Security Shed
-
-
-
... More
Footing/Pile cap
4.61
-
-
... More
Column up to Plinth
1.22
-
-
... More
Plinth beam
1.21
-
-
... More
COLUMN IN SUPERSTRUCTURE
-
-
-
... More
Security Shed
1.35
-
-
... More
ROOF BEAM
-
-
-
... More
Security Shed
1.21
-
-
... More
LINTEL
-
-
-
... More
Security Shed
0.61
-
-
... More
SILL
-
-
-
... More
Security Shed
0.04
-
-
... More
ROOF SLAB
-
-
-
... More
Security Shed
1.91
-
-
... More
CHAJJA
-
-
-
... More
Security Shed
1.22
-
-
... More
DRAIN
-
-
-
... More
Wall
81
-
-
... More
Base Floor / Top slab
72
-
-
... More
BOUNDARY WALL
-
-
-
... More
Footing/Pile cap
55.44
-
-
... More
Column
35.09
-
-
... More
Plinth beam
22.5
-
-
... More
Slab
8.44
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
2430.48
-
-
... More
1ST FL
406.55
-
-
... More
2ND FL
406.55
-
-
... More
3RD FL
408.43
-
-
... More
4TH FL
408.43
-
-
... More
5TH FL
408.43
-
-
... More
6TH FL
408.43
-
-
... More
7TH FL
458.06
-
-
... More
8TH FL
475.07
-
-
... More
9TH FL
86.75
-
-
... More
Security Shed
12.79
-
-
... More
DRAIN
180
-
-
... More
BOUNDARY WALL
137.61
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
18.22
-
-
... More
Security Shed
2.91
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
57.94
-
-
... More
1ST FL
68.05
-
-
... More
2ND FL
68.05
-
-
... More
3RD FL
68.05
-
-
... More
4TH FL
68.05
-
-
... More
5TH FL
68.05
-
-
... More
6TH FL
68.05
-
-
... More
7TH FL
77.19
-
-
... More
8TH FL
90.9
-
-
... More
9TH FL
267.57
-
-
... More
Security Shed
13.24
-
-
... More
BOUNDARY WALL
147.03
-
-
... More
Aerated Autoclaved Fly ash bricks/ Masonary in fillers/ inside walls using A.A.C. blocks of size 625mmX200mmX200mm having compressive strength more than 4N/ sqmm confirming to IS:2185-Part-3-1984 & IS:6441-1972 of Lean/Aerolite or equivalent products in cement mortar of mix (1:6) using cement of approved quality, screened & washed sand for use in super structure including splays cutting, circular moulding , corbrlling, champering & similar such type of works, watering & curing etc. including cost, conveyance, royalty, loading, unloading of all materials, cost of labour, scaffolding, sundries, T & P required for the works etc. complete in all respect as per specification and direction of the Engineer-in-charge.(O.M NO-3728 Dt-17.03.2018 of Works Department)
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
94.24
-
-
... More
1ST FL
127.28
-
-
... More
2ND FL
127.28
-
-
... More
3RD FL
127.28
-
-
... More
4TH FL
127.28
-
-
... More
5TH FL
127.28
-
-
... More
6TH FL
127.28
-
-
... More
7TH FL
153.4
-
-
... More
8TH FL
125.51
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
1531.14
-
-
... More
1ST FL
1904.56
-
-
... More
2ND FL
1904.56
-
-
... More
3RD FL
1904.56
-
-
... More
4TH FL
1904.56
-
-
... More
5TH FL
1904.56
-
-
... More
6TH FL
1904.56
-
-
... More
7TH FL
1846.24
-
-
... More
8TH FL
2228.87
-
-
... More
Terrace Floor
687.79
-
-
... More
Security Shed
42.38
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
710.25
-
-
... More
1ST FL
680.73
-
-
... More
2ND FL
680.73
-
-
... More
3RD FL
680.73
-
-
... More
4TH FL
680.73
-
-
... More
5TH FL
680.73
-
-
... More
6TH FL
680.73
-
-
... More
7TH FL
622.42
-
-
... More
8TH FL
700.97
-
-
... More
Terrace Floor
100.44
-
-
... More
Security Shed
50.65
-
-
... More
BOUNDARY WALL
1080
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
726.26
-
-
... More
1ST FL
965.89
-
-
... More
2ND FL
965.89
-
-
... More
3RD FL
965.89
-
-
... More
4TH FL
965.89
-
-
... More
5TH FL
965.89
-
-
... More
6TH FL
965.89
-
-
... More
7TH FL
951.09
-
-
... More
8TH FL
943.24
-
-
... More
Terrace Floor
247.46
-
-
... More
Security Shed
12.4
-
-
... More
DRAIN
585
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
1436.51
-
-
... More
1ST FL
1646.63
-
-
... More
2ND FL
1646.63
-
-
... More
3RD FL
1646.63
-
-
... More
4TH FL
1646.63
-
-
... More
5TH FL
1646.63
-
-
... More
6TH FL
1646.63
-
-
... More
7TH FL
1573.5
-
-
... More
8TH FL
1644.21
-
-
... More
Terrace FL
1035.69
-
-
... More
Security Shed
63.05
-
-
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
1ST FL
204.33
-
-
... More
2ND FL
204.33
-
-
... More
3RD FL
204.33
-
-
... More
4TH FL
204.33
-
-
... More
5TH FL
204.33
-
-
... More
6TH FL
204.33
-
-
... More
7TH FL
204.33
-
-
... More
8TH FL
204.33
-
-
... More
Terrace Floor
587.35
-
-
... More
Security Shed
42.38
-
-
... More
BOUNDARY WALL
1080
-
-
... More
Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
1436.51
-
-
... More
1ST FL
1646.63
-
-
... More
2ND FL
1646.63
-
-
... More
3RD FL
1646.63
-
-
... More
4TH FL
1646.63
-
-
... More
5TH FL
1646.63
-
-
... More
6TH FL
1646.63
-
-
... More
7TH FL
1573.5
-
-
... More
8TH FL
1644.21
-
-
... More
Terrace Floor
347.9
-
-
... More
Security Shed
63.05
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
-
-
-
... More
All Floors
2076.9
-
-
... More
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
260.72
-
-
... More
1ST FL
421.88
-
-
... More
2ND FL
421.88
-
-
... More
3RD FL
421.88
-
-
... More
4TH FL
421.88
-
-
... More
5TH FL
421.88
-
-
... More
6TH FL
421.88
-
-
... More
7TH FL
394
-
-
... More
8TH FL
446.03
-
-
... More
Security Shed
5.92
-
-
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
25.18
-
-
... More
1ST FL
30.2
-
-
... More
2ND FL
30.2
-
-
... More
3RD FL
30.2
-
-
... More
4TH FL
30.2
-
-
... More
5TH FL
30.2
-
-
... More
6TH FL
30.2
-
-
... More
7TH FL
36.66
-
-
... More
8TH FL
24.2
-
-
... More
Security Shed
1.24
-
-
... More
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
-
-
-
... More
All Floors
269.39
-
-
... More
Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
86.14
-
-
... More
1ST FL
78.33
-
-
... More
2ND FL
78.33
-
-
... More
3RD FL
78.33
-
-
... More
4TH FL
78.33
-
-
... More
5TH FL
78.33
-
-
... More
6TH FL
78.33
-
-
... More
7TH FL
79.37
-
-
... More
8TH FL
64.73
-
-
... More
TERRACE FL
13.62
-
-
... More
Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
28.37
-
-
... More
1ST FL
20.41
-
-
... More
2ND FL
20.41
-
-
... More
3RD FL
20.41
-
-
... More
4TH FL
20.41
-
-
... More
5TH FL
20.41
-
-
... More
6TH FL
20.41
-
-
... More
7TH FL
20.41
-
-
... More
8TH FL
13.15
-
-
... More
Supplying and fixing in floor, tread, steps and landing with Ceramic Floor tiles of special plain/printed series of premium grade having thickness 7mm to 8mm confirming to IS 13755 and of size 300mm x 300mm / 400mm x 400mm of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ), laid over 20mm thick bed of cement mortar (1:4) (1cement:4course sand)and filling the joint with white cement mixed with pigment to match the shades of the tile including cost, conveyance, royalties of all materials, all labour, hire and running charges of all machineries,labour cess, T&P sundries complete as per specifiction and direction of Engineer-in-Charges.
-
-
-
... More
Building Proper
-
-
-
... More
BASEMENT FLOOR
114.09
-
-
... More
GROUND FLOOR
86
-
-
... More
1ST FL
10.24
-
-
... More
2ND FL
10.24
-
-
... More
3RD FL
10.24
-
-
... More
4TH FL
10.24
-
-
... More
5TH FL
10.24
-
-
... More
6TH FL
10.24
-
-
... More
7TH FL
10.24
-
-
... More
8TH FL
10.24
-
-
... More
Security Shed
3
-
-
... More
Fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 of size 30cm x 20cm / 20cm x 20cm special plain / printed series in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
BASEMENT FLOOR
10.32
-
-
... More
GROUND FLOOR
7.21
-
-
... More
1ST FL
1.77
-
-
... More
2ND FL
1.77
-
-
... More
3RD FL
1.77
-
-
... More
4TH FL
1.77
-
-
... More
5TH FL
1.77
-
-
... More
6TH FL
1.77
-
-
... More
7TH FL
1.77
-
-
... More
8TH FL
1.77
-
-
... More
Security Shed
15
-
-
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floors
29.46
-
-
... More
Supplying fitting and fixing of stainless steel grill of 304 grade in WINDOW using 16 mm Square bars placed at 125 mm spacing BW as per approved design and specification, buffing, polishing etc with coist, conveyance, taxes of all materials, labour and T&P required for the work all complete in all respect
-
-
-
... More
All Floors
656.34
-
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
8TH FL
657.88
-
-
... More
Security Shed
12.4
-
-
... More
WATER PROOFING
Water proofing to the sunken slab: SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.
Stage3:Supply and application ofSika Top Seal 107-the cementitious,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied
-
-
-
... More
Few parameters:Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10%
-
-
-
... More
Building Proper
349.3
-
-
... More
Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials,Conveyance, labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
832.37
-
-
... More
Providing and applying two coats of high SRI heat reflective coating/albedo paints/cool roof/Ambi cool on roof surface.Application of a single coat of water based primer all over the roof surface followed with application of two-three coats of high SRI coatings of value 108 and above as per the instruction of engineer in charge.Final surface after the application should be dust and water repellent. This cost includes all materials, labour, T&P, transportation, taxes complete in all respect. ( Make: PBS /LERON CHEMICAL/ JM Coatings)
-
-
-
... More
Building Proper
832.37
-
-
... More
Security Shed
12.4
-
-
... More
Modified Clay Material-Slate stone Tender specification :-
Supply of MCM Modified Clay Material-MCM slate Stone Sunnye-1200 x 600 mm of PHOMI make,thickness 2.5mm as per company standard dimension,pattern,color as specified,manufactured through unfired patened(Ref: US patent8505840 B2 & European patent 2157139) manufacturing technology,bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K-EN 12667(2001), thermal resistance of 0.0568 M2 K/W-EN 12667 (2001) and Fire insulation-Class A-ASTM E84-15.The product should be patented from United States and Europe and with certifications by IGBC,Singapore Green Label and China Green Building material .MCM Materials should be fixed with suitable cement/polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in charge.Grouting should be done using filling and pointing method as per installation drawing provided,and colour of the grout should be as per architects specification depending on the substrate and as per direction of Engineer in charge.
-
-
-
... More
Building Proper
15340.34
-
-
... More
Louvered ventilator
Providing and fixing factory made uPVC white colour louvered ventilator upto 1.5m in height comprising of uPVC multi-chambered frame having section 58mm width X 50mm Height , Glass Sash: 37mm depth x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 4mm thick frosted glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
37.08
-
-
... More
Providing and fixing Door including frame, ISI marked shutters, required hardware & accessories i.e SS ball bearing hinges, SS door closer, SS lever handle, SS tower bolt, SS door stopper, SS screw etc. Frame Details: Factory made door frame (Make of NCL or Equivalent) of 48 mm thickness made of Cement Bonded Particle Board (Bison Panel) and Composite Board for water resistant property with wall thickness of 200mm. The frame is laminated with 0.2mm thick water proof and scratch resistant PVC Foil using hot press and high grade PUR Adhesive and is fitted with casing wick (Rubber Beading) for energy, dust and sound efficiency. The frame is affixed to the wall using high strength expandable PU Foam using tension rods for precision and optional anchor bolts, side and top of frame attached together using dowel screws and Quick Acting Adhesives.
-
-
-
... More
Shutter: Factory made door shutter (Make of NCL or equivalent) of 42 mm thick sandwiched with laminated Cement Bonded Particle Board (Bison Panel) 6 mm thick skins on both sides. Skeleton is made with Composite Board & Cement Bonded Particle Board (Bison Panel) of 30mm thickness (sides). Rails may be substituted with HDHMR (High Density High Moisture Resistant) board. Core of high density/uniform load distribution featured Honey Comb and Laminated Veneer Lumber (LVL) for holding the lock body and hardware, laminated with 0.2mm thick water proof and scratch resistant PVC Foil and edge-banded with 1mm thick PVC Edge Band using hot press and high grade PUR Adhesives. Architrave: Factory made architrave (Make of NCL or equivalent) fitted to pre-made grooves within the frame for added aesthetics. Plain design Architrave is made of Bison Panel. Architrave is laminated with 0.2mm thick water proof and scratch resistant PVC Foil using hot press and high grade PUR adhesive, fitted to the wall using strong quick acting adhesives. Standard sizes in mm for Plain
Architrave: 80 or 60 mm (Width) x 12 mm (Thickness). All complete as per approved drawing & direction of Engineer-in-Charge. Note: All hardware & accessories should be from Hettich Germany. Accessories included are SS ball bearing hinges, SS lever lock, SS tower bolt, SS door stopper. (Make:NCL or Giesta or equivalent)
-
-
-
... More
Building Proper
166.32
-
-
... More
Aluminum Casement Door/Window :-
Supplying , installation, testing & commissioning of uPVC- Casement doors made out of lead free green profiles of approved make with a NCL VEKA LTD./ FENESTA / KOMMERLING mark with complete windload calculation as per IS:875(Part 3) justifying the profiles and reinforcements used with frame dimension 58mm x 69mm x 50mm for doors and sash dimension of 58mm x 93mm x 54mm for doors with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 8mm clear reflective toughened glass. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the Door to be assembled and installed by an authorised fabrication partner . The Door must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. It will be provided butt hinges etc all complete as per direction of EIC.
-
-
-
... More
Building Proper
-
-
-
... More
MAIN DOOR
113.74
-
-
... More
Aluminium Fixed Windows:-
Supplying and installing Aluminium System -Fixed windows made out of ALUPURE/WINPLUS/ ALTECH make frame dimension of 39mm x 42mm for with corners mechanical joints.Alupure Aluminium System are extruded through Nalco Billets with 6063 T6 Grade.With complete wind load calculation as per 15:875(part-3)Almost unlimited choice of colours due to finishing techniques such as anodising and powder finishing .The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm.The profile manufacturer should have an authorised fabrication partener for windows assembling and installation.The windows must be installed complete with all kinds of ironmongery(including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system.Application of silicon sealant from inside/outside of MCCOY/Dowcorning or equivalent.OR
-
-
-
... More
Supplying installing Aluminium System openable windows made out of ALUPURE/WINPLUS/ALTECH make frame dimension of 39mm x 62.9mm & Sash dimension of 46mm x 92mm for with corners mechanical joints.Alupure Aluminium systems are extruded through Nalco Billets with 6063 T6 Grade .With complete wind load calculation as per IS:875(PART-3).Almost unlimited choice of colours due to finishing techniques such as anodising and powder finishing.The system can accomodate forsted glass with 4/5/6/8/10/12/14/20 & 22mm.The profile manufacturer have an authorised fabrication partener for windows assembling and installation.The windows must be installed complete with all kinds ironmongery(including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system.Application of silicon sealant from inside/Outside of Dowcorning/GE or equivalent.OR SUPPLYING AND INSTALLING aLUMINIUM sYSTEM sLIDING WINDOWS MADE OUT OF ALUPURE
-
-
-
... More
Building Proper
653.4
-
-
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation.
-
-
-
... More
All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:
4 nos Hinges on each leaf
1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock
1 Set D-type pull handle back to back on each leaf
1 no Concealed flush bolt in inactive leaf of Double door, if any
1 no vision glass on each leaf
Fastners as required.
The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.
-
-
-
... More
Building Proper
6.3
-
-
... More
Supply & Fixing of NCL Roll Formed Section for Structural Glazing made of galvanized steel colour coated/power coated (Base Steel as per IS 513 ‘D’ quality galvanized thickness of 0.72mm. The Glass holding section made of 304 grade stainless steel of 0.6mm thick. CRCA sections with Polyurethane Coating are to be used as stiffeners inside the CCS section as per the design requirement. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50- 60 microns thick. Dimensions of Sections: The sections are to be of 100x50 mm for frame verticals, 33x57 mm for frame horizontals, section for reinforcement should be of 31x55 mm / 48x98 mm (CRCA). Glass holding section should be of 32.5x37 mm for top and bottom grids, in between should be of 32.5 x 18mm.Tophunged Shutter Section should be 33 x 57 mm .Glass Should be used 5mm Reflective Toughened (Make- Guardian glass/Saint gobain/equivalent) including all fitting , fixtures, hardwares etc all complete as per direction of EIC. (Single Glazed Strl. Glazing) (Make: NCL or equivalent)
-
-
-
... More
Building Proper
1591.65
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Mouldings in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. . The above weight and thickness is considering dimensions of Mouldings up to 2133mm in height and 1219mm in width and having at least 50% void space. The Mouldings should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Mouldings should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. The rates includes all materials, labour, transportation T&P etc complete as per direction of EIC(Unistone/Birla/Jindal)The area of application are in column,Moulding,Jalies,Parapet,Capital etc where ever shown in Drawing.
-
-
-
... More
Building Proper
90.84
-
-
... More
Aluminum Sun Louvers 84R system comprises of 84 mm wide and 16 mm deep rol
formed out of aluminum coils. In Aluminum, Panels are made of 0.5mm thick aluminum alloy
3105/3005 and Carriers are made of 0.9mm thick aluminum alloy with cut-outs to hold panels
Aluminum panel and carrier shall be polyester powder coated with 60-70 microns. Sun
louver system is a vertical or horizontal wall sun shading system. The system use 84 R panels that
snap into vertically mounted frames. The frames can be mounted on the exterior of a building
over window openings, along balconies or over open area on a building elevation. The
vertical/horizontal frames are offered in two different designs that hold the panels at different
angles of 35 and 45 degrees. The ranges of angles provide air flow, sun shading safety from
rainfall and desired visibility (Make: HIE Steel /Hunter Dougle or equivalent)
-
-
-
... More
Building Proper
119.81
-
-
... More
Providing and fixing of 2 hours CBRI/UL Certified or 2 Hours Spectro Certified having 40 Mins of Insulation Fire Rated door with Single/Double leaf shutter of 46 mm thickness made of 0.8/0.9/1.0/1.2 mm thick skin pass GI Sheet and 1.2 /1.6 mm thick GI sheet for frame conforming to IS 277 with radius of 1.4 mm with minimum 120 gsm of Zn Coating to provide rust resistance. The Internal construction of the door is a specially designed Honeycomb or Rockwool at top, bottom and stile surrounds. The door shutter and frames are primed with Zn Phosphate Stoving primer and finished with Pure Polyester powder coating of thickness not less than 60 Micron. Wood finish through Heat transfer over and above this can be provided as per the directions of Engineer-in-charge. Mke; TATA Pravesh/Jindal/Shaki Horman Unistar/Doorwin)
-
-
-
... More
Building Proper
154.92
-
-
... More
Providing, Fitting & Fixing of 110mm dia PVC Rain water pipe with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
730
-
-
... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
GROUND FLOOR
4.15
-
-
... More
1ST FL
8.03
-
-
... More
2ND FL
8.03
-
-
... More
3RD FL
8.03
-
-
... More
4TH FL
8.03
-
-
... More
5TH FL
8.03
-
-
... More
6TH FL
8.03
-
-
... More
7TH FL
9.47
-
-
... More
8TH FL
8.03
-
-
... More
Supply and installation of 1.2 mm thick MYK POWER PRUFE 800 below membrane below grade pre-applied integrally bonded waterproofing sheet membrane composed of 0.7 mm thick HDPE backing layer and a trafficable weather resistant protective granular layer realizing a firm bonding to poured concrete to prevent water ingress applied on prepared sub base and shoring prior to casting of concrete. The membrane is loosely-laid with the adhesive side facing upwards and removing the selvedge release films at the pre-manufactured overlap areas and is firmly pressed to ensure firm bonding. Seal roll end laps and non-selvage joints with a special tape strip power prufe then firmly Duct Tape a double side adhesive tape to stuck on the overlap removing granules and pressing it thoroughly by roller to release entrapped air if any. The product complies to a tensile strength of 800N, elongation of 400% and peeling strength from concrete 2.5N/mm. The rate is inclusive of all adhesives, sealants, tapes for overlap areas, labour and all jointing material with necessary tools and equipment's for carrying out the work with cost, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge.
-
-
-
... More
Building Proper
1449.36
-
-
... More
Providing, fitting and fixing of Sikadur Combiflex SG 20P 200 and sealed by Sikadur 31C @ 1.4kg per meter over the expansion joints after cleaning the joints and applying of Sikadur 32 @ 200 gms per meter Epoxy bonding agent and levelled by Sikagrout 214 @ 8kg per meter and covered with 300mm wide 16 gauge Aluminium sheet complete including cost, conveyance, of all materials, labour, transportation charges etc complete in all respect as per specification and direction of the Engineer-in-charge. ( Sika or equivallent)
-
-
-
... More
Building Proper
116.17
-
-
... More
Retaining Wall Construction Joint Treatment:
Supply and installation of SealArm waterbar RS 800 on stater joint and construction joints horizontally & vertically with adhesive ). It’s a ReSwellable Hydrophilic Water bar & SealArm Waterbar RS 800 is a well-developed joining strip which is very economic and safe to use, compared to usual joint sealing methods. The necessary construction joints can be worked out frictionally and pressure water tight up to 3 bars.
-
-
-
... More
Building Proper
29.9
-
-
... More
Supply and installation of 1.5 mm thick MYK Self Stick 3000 post-applied Self-adhesive Membrane with HDPE liner onto prepared and primed(MYK Tarmat SB 200) retaining wall surface with a side overlap of 75mm and end overlap of 100mm as per specification. All membrane to be terminated at least 300mm above ground level by preparing a groove and terminate the membrane inside the groove and seal the groove with polymer modified mortar including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
-
-
-
... More
Building Proper
44.85
-
-
... More
Supplying and Fixing of M.S. Rolling Shutter etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
-
-
-
... More
Building Proper
218.4
-
-
... More
Supplying, fitting and fixing M.S. grill made out of structural steel, flats, plates, Square bars, confirming to IS specification for windows, ventilators etc. as per drawing and design, fixed to walls with clamps including 1 priming coat with approved metal primer and making good to all damages in walls and floors etc. including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Security Shed
54
-
-
... More
BOUNDARY WALL
7422.1
-
-
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
... More
Security Shed
1.8
-
-
... More
BOUNDARY WALL
121.5
-
-
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Green make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
-
-
-
... More
Security Shed
1.89
-
-
... More
Supply, fitting & fixing of Wood polymer composite (WPC) Door Frames with Rebate cuts and Assessories like - L-clamps and screw, finished cross section size 75mm x 45mm / 90mm x 50mm / 115mm x 55mm with 100% water, Termite and Borer proof with Density of 850 kg/m3, 100% recycleable, no contraction/ Expansion, Bend proof, Crack proof with 10yrs written warrantee, 100% Formaldehyde, phenol and Toxic free, swelling proof, screw holding capacity 70kg per screws with all necessary hardware fitting & fixtures etc complete as per directions of EIC.
-
-
-
... More
Security Shed
5.1
-
-
... More
Two track two panels sliding window with Single Glazed Unit:-
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles of approved make with a NCL VEKA LTD./ FENESTA / KOMMERLING mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass ST 450 of Saint Gobain or equivalent. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/ GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
-
-
-
... More
Security Shed
1.8
-
-
... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete
-
-
-
... More
Security Shed
1.58
-
-
... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
-
-
-
... More
Security Shed
4.95
-
-
... More
Cleaning & grubbing road land including uprooting rank vegetation, grass, bushes, shurbes,sapling and trees girth upto 300mm ,removal of stumps of trees cut earier and disposal of unsevicable materials and stacking of servicable materials to be used or auctioned up to lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm thickness
-
-
-
... More
PATHWAY
1376.53
-
-
... More
Loosening and Compacting original ground supporting embarkment to facilitate placement of first layer of embarkment, scarified to a depth of 150mm ,mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embarkment construction & clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
PATHWAY
619.44
-
-
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
PATHWAY
206.48
-
-
... More
Providing & laying of 80mm thick factory made cement concrete interlocking paver block of M-35 grade & approved make,varity,colour & size made by Block macking machine with strong vibratory compaction of approved design & shape laid in required colour & pattern over 50mm thick compacted bed of coarse sand ,filling the joints with fine sand etc .All complete including cost,conveyance,royalty,taxes of all material,,labour T&P,complete as per direction of Engineer-in-Charge.(cpwd analysis of rate page-1000
-
-
-
... More
PATHWAY
1376.53
-
-
... More
PARKING
159.18
-
-
... More
Providing,laying,fixing precast kerb stone of size-(560 x 300x 150) in the kerb wall are
-
-
-
... More
PATHWAY
425.13
-
-
... More
Design, Supply, Fabrication, Delivery and Erection of Tensile Fabric roofing including cost of materials, labours. With Membrane specifications as under : (Serge Ferrari, France) both side PVDF coat, Yarn : 1150 dtexPESHT CR treatment, Weight : 950g/sqm, Width : 267 cm - 105 inch, Tensile strength : 3000/2800N/5CM (WRAP * WEFT), Tear Resistances : 300N (WRAP * WEFT), Adhesion : 120N/5CM, Surface Treatment : Formula weldable fluorinated varnish, Light Transmission : 13.50%, Flame Ret ardency : M2/NFP92507CSFMT119, B1/DIN4102 including the cost of foundation works required for the work.
-
-
-
... More
PARKING
159.18
-
-
... More
DRY WALL PARTITION Supply and Installation of 70 mm thick magnesium oxide board drywall Tufbloc partition system ( Make: ANUTONE TUFBLOC or equivalent) having (high water & fire resistance) which includes two layers of tufbloc magnesia square board having square edge & size 2400 X 1200 x 10 mm to be fixed on the either side of the GI stud channel framework in horizontal position of length side board. The frame work includes Floor / Head ( FC 50 ) channels having thickness 0.06 mm length 3600 mm ,equal flanges of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm centres staggered noise & fire rated silicon sealant to caulked along the perimeter of the partition frame before fixing channels.The stud channels SC 48 having thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm should be placed into the floor / head channels positioned vertically at 600 mm centres. Horizontal intermediate channel at 1200 mm centres to locked with the vertical studs. Extra reinforcement to be provided at openings ( doors& Window ).
-
-
-
... More
Apply Synthetic poly fiber 10 x 25 is 50 mm width,600/1200 mm density 1000 gsm filled between the studs & held in position by using chicken mesh wire / pasting on the board. Boarding is to done on each side of studs framework in a staggered pattern by the help of self drilling screw at 300 mm centers. After boarding of two boards jointing & finishing is to be done by joint compound. The flush look will appear after sanding the two boards joint properly to get a smooth look . The technical parameters of the boards - Density- 1000 kg / mt cube weight 10 kg/ mtsq , Fire -150 min acoustic STC - 50 db, climate OCRH - 50 ,99 Termite resistance - yes, Moister absorbent - 6.8% after 2 hr, wet expansion less than -0.02% from ambient to saturation ,Moister Movement - 0.02% Green - RC % - 30 Strength - Anti sag. Test reports of manufactures are to submitted at the time of delivering of materials. The semi glazed partition will be erected with 8 mm tk float glass glazing ( partly frusted) at various positions complete with melamine polished Teak Wood beading . The rates includes all materials, labour, transportation T&P etc complete as per direction of EIC.
-
-
-
... More
INTERIOR WORK
1189.6
-
-
... More
Supply ,providing & making of glass partition, glass door(make of DORMA or equivalent fittings DORMA or equivalent XL-C-4002A Fanlight(9137502) patch ,DORMA XL-C-4006A Central (Connector(9137504) ,DORMA or equivalent XL-C 4051 Glass DoorPackage1.5*2.55mtr 45577.with LOck(9137880) ,DORMA XL-C 3000A H TYPE 400MNx22MM(9125521) with 12mm thickness toughenedglass with clear silicone.
-
-
-
... More
INTERIOR WORK
13.97
-
-
... More
MAGNESIA BOARD PLAIN CEILING Supply and Installation of false ceiling Anutone /Armstong/Saint Gobin 10 mm thick Tufbloc magnesium oxide HDFR boards of size 1200 x 2400 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50,95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than/ Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply Anutone synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework. Test certificate of the use products shall be submitted after procurement of materials.
-
-
-
... More
INTERIOR WORK
922.63
-
-
... More
GRID METAL CELLING SERGE ASTRAL CLIP IN
Supply and Installation of Anutone /Tharmaz/Hantordoglus 0.5MM mm thick Metal ceiling tile Serge Astral Clip In of size 600 x 600/1200 mm having density Kgs/ m3, weight 4 kg/m2 which is suspended by using Spring T wide 600 X 600 Spring T system. The technical parameters are as follows :Core - GMS*, Fire – Class-A , Acoustics – STC 50 - 90 ,TOA-20% ,Mensa-1.8mm Termite resistance ,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low , Thermal -NA W/mK,Poly Coated 60 microns Fleech Included. The Spring T system of 600 x 600 mm Horizental Or Vertical Line shall include wall angle with unequal flanges of size 14 & 20 mm wide, length 3000 mm, fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Spring T having flange length 3600 mm from the soffit with help of soffit cleat and Threded rod along with is then Metel Tile Cliping On Spring T slots in the at Main Spring T. square edge of size 600 x 600 x 0.5 mm thick shall be placed into the grid Horizental Or Verticall size of 600 x 600 mm. Test certificate will be submitted after procurement of materials.
-
-
-
... More
INTERIOR WORK
100.71
-
-
... More
CEILING CLOUDS Providing & fixing hanging horizontal Anutone /Tharmaz/Hantordoglus 30 mm thick with 1200 mm dia natural glass fibers threads only with unique white finish for HI- LR to facilitate uplighting options Anutone /Tharmaz/Hantordoglus Acoustic. The covered colour edges & hanging for holding clouds panels on the top. The approved colour & distance of hanging will be confirmed by Engineers. The density of the panel 140 kg /mt3 & weight of 5-6 Kg/mt sq. It has also have fire class 1 & P ,NRC - upto 0.9 Climate degree C -40 , RH - 95, Green V0c & RC% - Low ,35 should be hang from anuton metal pipes / purlin & joist with steel wire of 4 set /panel stains steel chain of heavy duty to be fasten with the clouds core with adhesive. The row ofAnuton clouds subtex nubby be at given distance 150 /300 / 450 mm c/c as per choice of engineers. Test certificate will be submitted after procurement of materials.
-
-
-
... More
INTERIOR WORK
64.67
-
-
... More
CEILING IN GRID SUBTEX NUBBY STEP EDGE Supply and Installation of Anutone /Techtom/Tharmaz 15 mm glassfiber steppe edge Glass fibre core ceiling tile of size 595 x 595 x 15mm having all edges encapsulated with chemical treated paint & having density 100-120 Kgs/ m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick and 15 mm wide pre coated metal T15/24 grid system. The technical parameters are as follows :Core - Glassfibre, Fire – Class 1 & P , Acoustics – NRC 0.95,Climate (OC RH) – 40, 95,Termite resistance ,Light reflectance – 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. The T15/24 Grid system of 600 x 600 mm module shall include wall angle(WA15) with unequal flanges of size 14 x 20 x3000mm wide, length 3000mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main T15(MT15W36) having flange width 15mm /24 mm , height 32/38 mm and length 3600mm thickness 0.30 mm from the soffit with help of soffit cleat and wire at 1200mm c/c. Cross T15 (CT15W12) with flange width 15 mm, height 32 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Finally Cross T15 (CT15W06) having flange width 15 mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200 mm Cross T15 at 1200mm centers and in direction parallel to the Main T15. Anutone Subtex NUBBY steppe edge of size 595 x 595 x 15mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform shade. Test certificate will be submmited after procurement of materials.
-
-
-
... More
INTERIOR WORK
2526.43
-
-
... More
E.I. WORK
Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conduct (NORPACK/ eq make) with 6A 250V MODULAR type switch ISI marked and ceiling rose marked mounted on Modular GI Box having front modular base plate of suitable size, with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex) switch /socket/modular GI Board (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge) GROUP-A
1022
-
-
... More
-do- light point Group-B
600
-
-
... More
-do- light point Group-C
430
-
-
... More
-do- Fan point Group-B
300
-
-
... More
-do- Fan point Group-C
280
-
-
... More
-do- Call Ball point Group-C
20
-
-
... More
Recessed wiring to subsequent group control light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conduct (NORPACK/ eq make) with 6A 250V MODULAR type single switch control to 3 nos max. point of ISI marked and looping earth wire including all accessories and connection as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex) switch /socket/modular GI Board (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
120
-
-
... More
Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FR PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC flexible conduit (NORPACK/ eq make) Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor /Polycab) switch /socket/modular GI Board Separate Point (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
894
-
-
... More
Recessed wiring to 6 AMP Modular socket out let in same switch board of ISI marked excluding cost of Modular GI Box and earthing point with as per direction of engg-in-charge. (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
539
-
-
... More
Supply and fixing of Multipurpose board having prov. Of 2Nos 6Amp plug with 6Amp switch on existing board (Modular) (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
203
-
-
... More
S/F of Call Bell /Buzzer ISI marked suitable for AC/Dc single phase 230 V complete in all respect as per direction of Engineer in charge.
22
-
-
... More
S/F of modular box with cover of suitable nominal size of surface or in recess including providing and fixing of 5 pin,15/16 Amp Modular socket out let and 15/16 Amp Modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
821
-
-
... More
S/F of step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius Next Gen -antibacterial/Eq approved reputed make as per the direction of Engineer-in-charge)
330
-
-
... More
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. -x
-
-
-
... More
2X1.5 + 1X1.5 sqmm FRLS Cu wire (for circuit wiring).Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
5988
-
-
... More
2X2.5 + 1X1.5 sqmm FRLS Cu wire (for Light plug circuit wiring). Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
11555
-
-
... More
4 x 4 + 2 x 1.5 sqmm FRLS Cu wire. Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
3522
-
-
... More
4X6 + 2*2.5 sqmm FRLS Cu wire (submain).Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
3455
-
-
... More
4 x10 + 2x4sqmm FRLS Cu wire. Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
2455
-
-
... More
4 x16 + 2x10 sqmm FRLS Cu wire.Make-Polycab/RR kable/Finolex/Eq approved make as per direction of Engineer-in-charge
2088
-
-
... More
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
330
-
-
... More
FITTING & FIXTURE WITH CABLING
-
-
-
... More
Supply & Installation of surface LED Luminarie of Mirror Light (5W) of Make:-Wipro CAT No:(LL 20 ) 100 Lumen per watt / Philips/panasonic/Havells/Eq approved make as per direction of Engineer-in-charge
75
-
-
... More
Supply & Installation of surface LED Luminarie of Entry/Exit Light with back up for 2 hrs. of Make-: BAJAJ (CAT: BESL 03 LED SSD WBB) & LT/ Philips/ Orient/Abacus/Wipro /panasonic/prolite/Eq approved make as per direction of Engineer-in-charge.
20
-
-
... More
Supply & Installation of GATE LED Light (45 Watt) of Make:-Wipro CAT No:(LP 05 ) / Philips/LT /Bajaj /panasonic.Philips/panasonic/Havells/Leksa/ Eq approved make as per direction of Engineer-in-charge
4
-
-
... More
Supplying, installation, testing and commissioning of ceiling fan with safety steel rope including wiring the down rod, earthing etc as required (Make : Orient pspo/ Usha striker/ Havells velocity/Eq approved make as per direction of Engineer-in-charge)- 1200 mm sweep
330
-
-
... More
Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvreas required. 300 mm sweep fibre body fresh air fan. (Make - Usha/ Orient/ Havells/Eq approved make as per direction of Engineer-in-charge)
100
-
-
... More
Supply and fixing of2x2 ft 36watt LED round / square/ recess mounted panel Lights (Make-Havells/ wipro/ panasonic/ Philips/Eq approved make as per direction of Engineer-in-charge)
200
-
-
... More
Supply and fixing of 18watt LED round / square recess mounted panel Lights (Make-Havells/ wipro/ panasonic/ Philips/Eq approved make as per direction of Engineer-in-charge)
1222
-
-
... More
Supply and fixing of 18watt LED round / square Surface mounted panel Lights (Make-Havells/ wipro/ panasonic/ Philips/Eq approved make as per direction of Engineer-in-charge)
620
-
-
... More
SITC of IP 20 Non-integral flexible LED strip light(IN/OUT DOOR),High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic with Driver or similar model of /PHILIPS/Wipro/jaquar/ Leksa or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
24
-
-
... More
Supplying and fixing of small focus Outdoor spike type light for small monuments as 12W round projected , 5700 K required as per direction of Engg.-in-Charge. Make : Panasonic or similar model of /PHILIPS/LT/WIPRO/ Leksa & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
32
-
-
... More
Supply and fixing of Out door garden LED light for Garden 45 watts in all respect as per direction of Engineer in charge.(Make : Phillips/panasonic/havells/wipro/Leksa/Eq make as per direction of Engineer-in-charge)(2Years Warranty)
32
-
-
... More
Supply of 2.5 mtr DECORATIVE POLE WITH CAST ALUMINIUM DECORATIVE PIECE with 110 mm bottom A/F & 70mm top A/F made up of 3mm thk. HT sheet along with base plate of size 150X150X8 mm thk. PCD - 150 mm with M16x6000mm “J” type foundation bolt.
21
-
-
... More
Foundation, erection and commissioning of street light pole and arm to proper alignment with supply of all materials such as steel reinforcement , metal, chips, cement , sand, cable entry pipe, shuttering for RCC work duly providing foundation bolt and nut with providing not less than 1ft× 1ft× 3ft concrete(1:2:4) as per direction of field engineer during execution and approved drawings including labour charges, cost and conveyance of materials etc. complete.
20
-
-
... More
Supply & Fixing of 45 W LED Luminarie with LED symmetric post top lantern with optical grade diffuser with inbuilt surge protection of 4KV (4000 K-CCT) with IP65 driver of 4KV SPD of Make:-Wipro CAT No:(LP 05 ) / Philips/DISANO/Bajaj/LT .. as required. POSTTOP LANTERN: 3 mtr height special steel grade pipe with optical grade toughend glass with inbuilt 4KV SPD , CCT -3000K of Make:-Bajaj/Leksa/Eq approved make as per direction of Engineer-in-charge
20
-
-
... More
Supply of 4sqmm 4core PVC Armoured Copper cables(Make-Polycab /Havells/Finolex/Eq approved make as per direction of Engineer-in-charge)
1522
-
-
... More
SITC Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years
30
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
490
-
-
... More
Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
560
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
60
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
155
-
-
... More
Providing and fixing 50mm x 6 mm copper strip3.0kg per meter on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
456
-
-
... More
Supplying & Installing following size of Perforated Hot dipped galvanised Iron cable tray with perforation not more than17.5% in convenient sections joined with connectors, suspended from the ceiling with GI suspenders including GI nut & bolts as required. Make: Rmcon/OBO
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
360
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
880
-
-
... More
Supplying & Installing following size of Perforated Hot dipped galvanised Iron cable Ladder with perforation not more than17.5% in convenient sections joined with connectors, suspended from the ceiling with GI suspenders including GI nut & bolts as required. make:Rmcon/OBO
-
-
-
... More
600 mm width X 62.5 mm depth X 2 mm thickness
355
-
-
... More
BDB'S ,MCB,RCBO,RCCB & PANEL
-
-
-
... More
DBS- Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)- 8 way, Double door as LDB. (Make : Schneider (ACTI 9 ) /legrand(Ekinox)/siemens(betaguard)/Eq approved make as per direction of Engineer-in-charge)
30
-
-
... More
DBS- Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)- 4 way, Double door as LDB. (Make : Schneider (ACTI 9 ) /legrand(Ekinox)/siemens(betaguard)/Eq approved make as per direction of Engineer-in-charge)
30
-
-
... More
12 way, Double door SPN as PDB. (Make : Schneider (ACTI 9 ) /legrand(Ekinox)/siemens(betaguard))
20
-
-
... More
Supply and fixing of RCCB DP 63 A rating 240V 100 mA breaker suitable for lighting and other loads in the existing DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge. (Make : Schneider (ACTI 9 ) /siemens/Eq approved make as per direction of Engineer-in-charge)
90
-
-
... More
Supply and fixing of RCCB FP 63 A rating 240 V 300 mA breaker suitable for lighting and other loads in the existing DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge. (Make : Schneider (ACTI 9 ) /siemens/Eq approved make as per direction of Engineer-in-charge)
70
-
-
... More
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) (Make : Schneider (ACTI 9 ) /siemens/Eq approved make as per direction of Engineer-in-charge)
720
-
-
... More
Supply of CPRI approved 160 A C/O Sub panel having following specification 2mm thick sheet ,size:44*12*32 inch ,160A Al. busbar ,duly treated by 7 tank treatment process, Provision of 1nos 160 A Changer Over as Incomer,outgoing feeder : 63A FP 10KA MCB 6 NoS, Surge protective device 15KA, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.(Power and Light load sub panel EACH FLOOR)(Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
19
-
-
... More
Supply of CPRI approved 630A outdoor double door hvac sub panel panel having following specification 3mm thick sheet ,800A copper busbar ,duly treated by 7 tank treatment process, Provision of 1nos 630 A 36ka 4p micropressor based mccb as Incomer,outgoing feeder : 63A FP 10KA Rcbo 300ma -14 nos Surge protective device 15KA, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.
2
-
-
... More
Supply of CPRI approved 63 A Sub panel having following specification 2mm thick sheet ,size:40*12*32 inch ,125A Al. busbar , Provision of 1nos 63A 16 KA MCCB as Incomer,outgoing feeder : 32A FP 10KA MCB 6 NoS, Surge protective device 40KA, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge..(Emergency load sub panel EACH FLOOR)(Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
9
-
-
... More
MAIN PANEL-1 should be TTA (panel should conform IEC-61439-1&2 with Type-1 Surge protection device). Offer needs to be submitted by the OEM . Type test certificate has to be submitted by bidder before finalization of this offer from the OEM. panel should be capabale of IOT based communication and future digitalization.Cloud base APP shall be provided along with panel. Sensors shall be contact based for measuring temperature with wired one. All the energy meters feeder status, tepmerature of ACB feeder terminals shall be available on the APP based on Mindsphere.Panel should have provision of contacts for Compatibility to the BMS system. make of enclosure : Schneider Prisma/Siemens /Rittal/Eq approved make as per direction of Engineer-in-charge
1
-
-
... More
Busbar - 3000 Amp Al busbar with SC rating of 65KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply or as per type test
Two(2) Nos Incomers - 2 Nos from Transformer (Distributed in two sections) each comprising of one (1) - 2000A,4P,65KA, EDO Type ACB with microprocessor controlled LSING + LCD Display(Ics = 100% Icu) and over voltage &under voltage release,breaker control switch,RS 485 expansion module auxilliary contactor and terminals taken out suitable for termination of bus trunking as required. Additionally there should be mechanical indication regarding RLT need to be as an inbuilt feature in that ACB. ACB should be capable for future communication capable with DCS/PLC. ACB should have inbuilt ready to close indication as a safety features facility. Ambient temperature should be on or above 50 Deg C. No derating will be allowed.
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 2000/1A, 5 VA, Cl 1/0.5, 10 VA, Cl 1/0.5, 15 VA, Cl
1/0.5, ID-32X125, OD-110X195, Depth-50 Metering
Current Transformer , 50VA, CL-1/3P, Potential Transformer, Resin Cast, 1no moving iron voltmeter & ammeter
-
-
-
... More
One set - Indicating lamp forR,Y,B, ON/OFF/Trip,spring charged,discharged,breaker healthy and Phase indication with control fuse/ MCB 1 No Bus coupler with adapter Comprising of 1 No - 2500A,65 KA,4P EDO type ACB With O/C,S/C,E/F,SPP with micro processor based release Castel Key interlocking as required.
1 No PLC based Logic controller Comprising of 1 No - PLC based logic contrller for 2 nos of DG & 2 nos of Transformer with auto syncronisation,auto load shaireing.
Two(2) Nos Incomers - 2 Nos from DG Set (Distributed in two sections) each comprising of
-
-
-
... More
One (1) - 2000A,4P,65KA, EDO Type ACB with microprocessor controlled LSING + LCD Display(Ics = 100% Icu) and under voltage release, auxilliary contactor and terminals taken out suitable for termination of bus trunking as required. Additionally there should be mechanical indication regarding RLT need to be as an inbuilt feature in that ACB. ACB should be capable for future communication capable with DCS/PLC. ACB should have inbuilt ready to close indication as a safety features facility. Ambient temperature should be on or above 50 Deg C. No derating will be allowed.
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
-
-
-
... More
One(1) set of – 2000/1A, 5 VA, Cl 1/0.5, 10 VA, Cl 1/0.5, 15 VA, Cl
1/0.5, ID-32X125, OD-110X195, Depth-50 Metering
Current Transformer , 50VA, CL-1/3P, Potential Transformer, Resin Cast, 1no moving iron voltmeter & ammeter One set - Indicating lamp forR,Y,B, ON/OFF/Trip,spring charged,discharged,breaker healthy and Phase indication with control fuse/ MCB with SLR feature.
OUTGOING FEEDERS:-
Six(6) - Outgoing Feeder (2 nos APFC,2 nos for rising main,2 nos spare) each comprising of
One (1) - 800A,4P,36KA,microprocessor based mccb One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 800/5A , 15VA , CL 1.0. CTs One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB .
Four (4) - Outgoing Feeders (For 1no fire panel ,2no spare) each comprising of
One (1) -630A,4P, 36KA,MCCB with QR code
-
-
-
... More
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 630/5A , 15VA , CL 1.0. CTs .
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB .
Two (2) - Outgoing Feeder each comprising of
One (1) -400A,4P, 36KA,MCCB with QR Code
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 400/5A , 15VA , CL 1.0. CTs .
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB .
-
-
-
... More
Four (4) - Outgoing Feeder One (1) -250A,4P, 36KA,MCCB with QR code
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 250/5A , 15VA , CL 1.0. CTs One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB .
Six(6) - Outgoing Feeder
One (1) - 125A,4P, 25KA,MCCB with QR Code
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 125/5A , 15VA , CL 1.0, CT One Set ON/OFF trip with indicating lamp with control fuse/ MCB .
One(1) set of – Digital Voltmeter
One(1) set of – Digital Ameter
-
-
-
... More
Eight (8) - Outgoing Feeder One (1) - 100A,4P, 25KA,MCCB with QR code
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 100/5A , 15VA , CL 1.0, CT One Set ON/OFF trip Indicating lamp & phase indication with control fuse/ MCB One(1) set of – Digital Voltmeter
One(1) set of – Digital Ameter
-
-
-
... More
Supply and fixing of 2000Amp,65ka,EDO with O/V,U/V,Eath fault protection complete in all respect as per direction of Engineer in charge. (Make : Schneider(masterpact nw/siemens 3WT/Eq approved make as per direction of Engineer-in-charge)(MAIN,DG)
4
-
-
... More
Supply and fixing of 2500Amp,65ka,EDO with O/V,U/V,Eath fault protection complete in all respect as per direction of Engineer in charge. (Make : Schneider(masterpact nw/siemens 3WT)(MAIN,DG)
1
-
-
... More
SITC of energy management solution to monitor,analysis and predict the trends of electrical energy consumption and compare ;the energy performance with bench mark,on off trip status of all Mccb/ACB outgoing/incoming feeder smart terminal to collect data on energy meter and further communicated to I/o sence software platform with IOT 4G gate way ,SMPS ,software and hardware confurgation RS 485 modbus cableing life time software lincense . (Make: Scneider ecostruxure/Siemens mindsphere/Eq approved make as per direction of Engineer-in-charge)
1
-
-
... More
SITC of lenovo p360 workstation with i7 12 th gen ,á 1tb HDD,256 gb SSD,16 gb ram,4 gb nvidia graphics card ,with 32 inch 4k display genuine windows, inbuilt ms office ,autocad software in complete as per the direcion of engineer incharge (Make: Lenovo/Eq reputed make as per direction of Engineer-in-charge)
1
-
-
... More
Supply and fixing of FP40- 63 A,10KA rating 440 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
172
-
-
... More
Supply and fixing of FP 06-32 A,10KA rating 440 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/siemens)
178
-
-
... More
Supply and fixing of FP 63 A,300mA 10KA rating 440 V "C" series RCBO suitable for lighting and other loads ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge ((Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge(HVAC PANEL)
28
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 800A,Ics = 100% Icu, 36 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
6
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 630A,Ics = 100% Icu, 36 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
6
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 400A,Ics = 100% Icu, 36 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
2
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 250(200-250A)A,Ics = 100% Icu, 36KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
8
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 250(200-250A)A,Ics = 100% Icu, 25KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
3
-
-
... More
Supply and fixing of 160A 4Pole Change Over,Ics = 100% Icu in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens)
19
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 125A,Ics = 100% Icu, 25 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Hager/Eq approved make as per direction of Engineer-in-charge)
13
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 100A,Ics = 100% Icu, 25 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
20
-
-
... More
Supply and fixing of MicroProcessor based 4 pole MCCB 63-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
18
-
-
... More
Supply and fixing of 7KT Smart Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) energy meter,RS 485 port IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge . (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
35
-
-
... More
S/F of 100-250A Vari-depth standard handles complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
45
-
-
... More
S/F of 400-630A Vari-depth standard handles complete in all respect as per direction of Engineer in charge. (Make : Schneider/siemens/Eq approved make as per direction of Engineer-in-charge)
6
-
-
... More
350 KVAR APFC Panel
-
-
-
... More
Busbar -800 Amp TP Al busbar with SC rating of 50 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply.TYPE-2 SPD SHOULD BE PROVIDED. 2mm thick sheet ,gland plae 3mm CPRI approved
One(1) - Incoming feeder having
One (1) - 800A,TP,36KA, microprecosser based MCCB should be capable for future communication capable with DCS/PLC. ACB should have inbuilt ready to close indication as a safety features facility. Ambient temperature should be on or above 50 Deg C. No derating will be allowed.
One(1)- Multifunction digital meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP & ethernernet port for baisy chain port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp.
One(1) set of – 800/1A, 5 VA, Cl 1/0.5, 10 VA, Cl 1/0.5, 15 VA, Cl
1/0.5, ID-32X125, OD-110X195, Depth-50 Metering
Current Transformer , 50VA, CL-1/3P, Potential Transformer, Resin Cast, One set - Indicating lamp forR,Y,B, ON/OFF/Trip,spring charged,discharged,breaker healthy and Phase indication with control fuse/ MCB
One (1) Set - 12 step microprocessor controlled pf correction relay with LCD display, pf meter and CT of appropriate rating to be installed in Main LT Panel 1 on the incomer feeder from transformer. Auo/ Manual Selector switch
-
-
-
... More
Ten(10) Outgoing Feeders each provided with MCCB, Contactor, ON/OFF push button and indicating lamp and capacitors
One (1)-Outgoings each having
One (1) - 250A TP,36 KA,MCCB with QR code One (1) - Capacitor duty contactor suitable for 100 KVAr capacitor(1x100Kvar).
One (1) - 100 kVAr, 440V, TP Super Heavy duty capacitor with invuilt over pressure disconnector and have a fascility of shock hazzard protected SIGUT terminal with internal wiring, fuses,Harmonic Filter (7%) and temperature control via micro switch. complete as required.
One (1) copper wound dutuned Reactor for 100 KVAr capacitor.
Three (3)-Outgoings each having
One (1) - 125A TP,36 KA,MCCB with QR code
One (1) - Capacitor duty contactor suitable for 50 KVAr capacitor
One (1) - 50 kVAr, 440V, TP Super Heavy duty capacitor with inbuilt over pressure disconnector and have a fascility of shock hazzard protected SIGUT terminal with internal wiring, fuses,Harmonic Filter (7%) and temperature control via micro switch. complete as required.
One (1) copper wound dutuned Reactor for 50 KVAr capacitor.
-
-
-
... More
Three(3)-Outgoing each having
One (1) - 63A TP,16 KA,MCCB
One (1) - Capacitor duty contactor suitable for 25 KVAr capacitor.
One (1) - 25 kVAr, 440V, TP Super Heavy duty capacitor with invuilt over pressure disconnector and have a facility of shock hazzard protected SIGUT terminal with internal wiring, fuses,Harmonic Filter (7%) and temperature control via micro switch. complete as required.
One (1) copper wound dutuned Reactor for 25 KVAr capacitor.
Two (2)-Outgoings each having
One (1) - 40A TP,16 KA,MCCB with One (1) - Capacitor duty contactor suitable for 10 KVAr capacitor.
One (1) - 10 kVAr, 440V, TP Super Heavy duty capacitor with invuilt over pressure disconnector and have a fascility of shock hazzard protected SIGUT terminal with internal wiring, fuses,Harmonic Filter (7%) and temperature control via micro switch. complete as required.
One (1) copper wound dutuned Reactor for 10 KVAr capacitor.
One (1) copper wound dutuned Reactor for 10 KVAr capacitor.
One (1)-Outgoing having
-
-
-
... More
One (1) - 16A, TP,16 KA,MCCB One (1) - Capacitor duty contactor suitable for 5 KVAr capacitor.
One (1) - 5 kVAr, 440V, TP Super Heavy duty capacitor with invuilt over pressure disconnector and have a fascility of shock hazzard protected SIGUT terminal with internal wiring, fuses,Harmonic Filter (7%) and temperature control via micro switch. complete as required
One (1) copper wound dutuned Reactor for 5 KVAr capacitor.
2
-
-
... More
Three (3) - Lift Panels to be installed in respective lift rooms, each comprising of One (1) Incomer - 100 Amp, 25 KA, MCCB with QR code with 3 Nos Phase indicating lamps with control fuse/ MCB with MFM(A+V+F) and selector switch & type-2 SPD.
Busbar - 100 Amp cu busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply One (1) - Outgoing Feeder with 63 Amp 4P 10KA MCB (for lift Panel supply)
Three (3) - Outgoing feeder each comprising with 25A,DP,10KA MCB (for ARD battery charger,Liftwell lighting & one nos spare)
-
-
-
... More
PANEL AS ABOVE
3
-
-
... More
UPS I/C Panel
-
-
-
... More
one (1) - 250 Amp, 36 KA,4P MCCB, with QR code with 3 Nos Phase indicating lamps with control fuse/ MCB , 3 Nos 125/5 A 15VA Cl 1.0 Multi function Meter(A+V+F).Type-2 SPD provided.
Busbar - 250 Amp, (TP+2N) ,25KA Cu busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase supply.
Three (3) -One outgoing feeder for (UPS I/C panel & One no Spare) each comprising of
One (1) - 125A,4P, 25KA,MCCB
One(1) set of – 125/5A , 15VA , CL 1.0, CT One Set ON/OFF/trip Indicating lamp with control fuse/ MCB One (1) -One outgoing feeder for Service Building DB
One (1) - 32A,4P, 10KA,MCB
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
FLOOR PANEL
-
-
-
... More
LIFT & VENTILATION PANEL
-
-
-
... More
Two(2) Incomer - 250 Amp,4P MCCB with control fuse/ MCB, MFM(A+V+F)and selector switch One(1) set of – 250/5A , 15VA , CL 1.0. CTs Busbar - 250 Amp,TPN CU busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply Buscoupler : 250 Amp,4P MCCB with control fuse/ MCB, Digital Voltmeter,Digital ammeter and selector switch
NINE (9) - Outgoing Feeder (For 3ifts & 2nos spare,4 ventilation panel ) each compraising of
One (1) - 63A,4P, 25KA,MCCB with QR code
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per direction of Engg.-in-Charge. .(Equievalant model each item of Legrand/Schneider/L&T/ABB or equievalant make & model)Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials.
2
-
-
... More
LIFT
-
-
-
... More
Supply,Installation, Testing & Commissioning of of 13(Thirteen) Passenger gearless with Machine room Capacity(884 Kg),Elevator G+8 Floors with ACVVVF drive/Control for constant load of 884 kg ARD 1.25 MPS with simplex Collective Selective Control without attendant car position indicators,battery operated alarm bell & emegency light,woodpecker interior with white granite flooring car interior, centre opening automatic sliding stainless steel Silver Sky finish doors for car entrance & hoist way entrance etc as specified in the technical specification of DTCN including all steel,civil electrical materials as specified eg. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting etc. Hoist way wiring and other associated wiring including Fireman's switch complete in all respect as per direction of Engineer in charge.The Elevator should be suitable for physically handicapped person. (Make:- OTIS/ kone/Schindler/Mitshubishi/Johnson//Eq approved make as per direction of Engineer-in-charge)
2
-
-
... More
Supply,Installation, Testing & Commissioning of of 20(Twenty) Passenger bed gearless with Machine room Capacity(1360 Kg),Elevator G+8 Floors with ACVVVF drive/Control for constant load of 1360 kg ARD 1.25 MPS with simplex Collective Selective Control without attendant car position indicators,battery operated alarm bell & emegency light,woodpecker interior with white granite flooring car interior, centre opening automatic sliding stainless steel Silver Sky finish doors for car entrance & hoist way entrance etc as specified in the technical specification of DTCN including all steel,civil electrical materials as specified eg. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting etc. Hoist way wiring and other associated wiring including Fireman's switch complete in all respect as per direction of Engineer in charge.The Elevator should be suitable for physically handicapped person. (Make:- OTIS/ kone/Schindler/Mitshubishi/Johnson/Eq approved make as per direction of Engineer-in-charge)
1
-
-
... More
BUSBAR
-
-
-
... More
Supplying Of 800A 415V =36KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with =130A/sqcm of SChneider/Legrand make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6mm - RO,IK 10 Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge. (FOR main panel to all floor)Warrentee period must be 5 years & compelete test certificate must be submitted .
120
-
-
... More
Installation, Testing & Commissioning of Above Item.
1
-
-
... More
Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing rising mains for use on 3 phase 4wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated without MCCB ( complete etc. as required,as per the direction of Engg-in-charge .Make-SChneider/Legrand & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation.Warrentee period must be 5 years & compelete test certificate must be submitted .
-
-
-
... More
250A 30kA SC for 1 sec
4
-
-
... More
125A 30kA SC for 1 sec
46
-
-
... More
800A end feed unit
3
-
-
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
1core x 630sq mm ( 4run per phase for Transformer,2run per phase for DG set )
4000
-
-
... More
3.5core x 300 sq mm ( 2 run for each hvac panel)
270
-
-
... More
3.5core x 300 sq mm fire panel
70
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
4core x 10 sq mm
400
-
-
... More
4core x 16 sq mm
100
-
-
... More
4 core x 4 sq mm
121
-
-
... More
3.5core x 35 sq mm
320
-
-
... More
3.5core x 50 sq mm
560
-
-
... More
3.5core x 70 sq mm
320
-
-
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade 630 SQ. MM direct in trench in the trench in one horizontal formation as required as per direction of Engg.-in -charge.
3700
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade 300 SQ. MM direct in cable tray in the trench in one horizontal formation as required as per direction of Engg.-in -charge.
210
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade 50 SQ. MM direct in cable tray in the trench in one horizontal formation as required as per direction of Engg.-in -charge.
500
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade 70 SQ. MM direct in cable tray in the trench in one horizontal formation as required as per direction of Engg.-in -charge.
260
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade upto 35 SQ. MM direct in cable tray in the trench in one horizontal formation as required as per direction of Engg.-in -charge.
741
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x300 sq mm
12
-
-
... More
1 core x630 sq mm
140
-
-
... More
4 core x16sq mm
18
-
-
... More
3.5 core x50sq mm
46
-
-
... More
3.5 core x70 sq mm
46
-
-
... More
3.5 core x35 sq mm
26
-
-
... More
FIRE FIGHTING
-
-
-
... More
PUMPS AND APPURTENANCES:-Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge (Make:PUMP:KBL/ Grundfos / KSB/ Wilo)
2
-
-
... More
Supply , installation, testing & commissioning of Diesel Engine driven end suction Back pullout type Centrifugal pump having 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal and suitable diesel engine complying to TAC norms along with all accessories including control wiring between panel & DG set and fuel storage tank including providing base frame coupling,coupling guard as per direction of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo)
1
-
-
... More
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal Jocky pump delivering 180 LPM at 60Mtr head with CI casing bronze impeller , SS shaft with mechanical seal and 2 pole TEFC electric motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply including providing base frame coupling,coupling guaaard as per direction of Engineer-in-charge.(Make:Kirlosker/ Gunfoss / KSB/ wilo)
2
-
-
... More
Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 630 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 400 Amp 36 KA TP MCCB with microprocessor release, O/L, S/C and E/f release, Voltmeter with s/s, Ammeter with S/s, 3 Nos 400/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING: a)Three(3)-250 Amp TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S
c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
Supply & Laying of Al Armoured XLPE power cable of 1.1 KV grade of following size on Cable.Make-Havels/Polycab/KEI.
-
-
-
... More
3.5C X 70 sqmm
80
-
-
... More
4C X 16 sqmm
130
-
-
... More
Supply & Laying of copper armoured cable of following size.Make-Make-Havels/Polycab.
-
-
-
... More
12Cx2.5 sqmm
35
-
-
... More
2Cx1.5 sq mm
75
-
-
... More
Cable Tray-:Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.
-
-
-
... More
150 mm (W) X 50 mm (H) X 1.6 mm thick sheet
150
-
-
... More
450 mm (W) X 50 mm (H) X 2 mm thick sheet
30
-
-
... More
Cable laying
-
-
-
... More
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
-
-
-
... More
Upto 35 Sqmm
80
-
-
... More
Above 35 Sqmm and upto 95 sqmm
80
-
-
... More
End Termination-:Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
3.5C X 70 sqmm
5
-
-
... More
4 X 16 sqmm
6
-
-
... More
PIPE & VALVES ETC:-Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.Make-Tata/Jindal/Sail.
-
-
-
... More
200mm NB
24
-
-
... More
150mm NB
72
-
-
... More
100mm NB
310
-
-
... More
80mm NB
150
-
-
... More
65mm NB
900
-
-
... More
50mm NB
1100
-
-
... More
40mm NB
1150
-
-
... More
32mm NB
950
-
-
... More
25mm NB
1200
-
-
... More
Supply,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size including laying in ground after excavation and refilling of trench along with providing 4mm thick pipecoat for underground pipe after applying wrapping coating primer as required as per direction of Engineer-in- charge.Make-Tata/Jindal/Sail.
-
-
-
... More
150mm NB
255
-
-
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-Audco/Zoloto/Kirloskar/Leader.
-
-
-
... More
200mm NB
2
-
-
... More
150mm NB
12
-
-
... More
100mm NB
10
-
-
... More
80mm NB
9
-
-
... More
65 mm NB
9
-
-
... More
50 mm NB
18
-
-
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Audco/Zoloto/Kirloskar/Leader.
-
-
-
... More
150mm NB
5
-
-
... More
100mm NB
4
-
-
... More
Supply,Installation,Testing & Commissioning of orifice plate made of 6mm thick stainless steel with orifice of required size in between flane and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/ sq cm complete as required.
18
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge. Make-H guru/G guru.
6
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge. Make-Indfos/Grandfos.
5
-
-
... More
Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Deepak/Zoloto/Kirloskar/Leader.
-
-
-
... More
200mm NB
2
-
-
... More
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required as per direction of Engineer-in-charge.
2
-
-
... More
Supply,Installation,Testing & Commissioning of 150 NB C.I. PRV with matching flanges as per direction of Engineer-in-charge.
1
-
-
... More
Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge. Make-Newage/Fireshield/HD.
1
-
-
... More
WET RISER CUM DOWN COMER SYSTEM:-Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge. Make-Newage/Safex/Omex/Minimax.
25
-
-
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge. Make-Newage/Safex/Omex/Minimax.
25
-
-
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.Make-Newage/Safex/Omex/Minimax.
50
-
-
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.
25
-
-
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.Make-Newage/Safex/Omex/Minimax.
18
-
-
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
4
-
-
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Newage/Safex/Omex/Minimax.
2
-
-
... More
SPRINKLER SYSTEM:-Supply,Installation,Testing & Commissioning of Pendent/ Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge. Make-HD/Tyco/Newage.
557
-
-
... More
Providing, fitting & fixing of following size cast iron double flanged Y type strainer with SS 304 perforated screen confirming to IS 1538 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. Make-Deepak/Zoloto/Kirloskar/Leader.
-
-
-
... More
150mm dia
2
-
-
... More
Supply,Installation,Testing & Commissioning of Cast Iron Ball Valve of 15 mm size with teflon seals, Stainless steel Ball & Stem, MS Lever with PVC Coating As Per IS: 9890 ISI Marked. Make-Deepak/Zoloto/Kirloskar/Leader.
11
-
-
... More
25 mm size
31
-
-
... More
Providing, fitting and fixing of C.I. single Air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC.
2
-
-
... More
Providing & fixing of Water Flow Switch switable for pipe 100 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.Make-Honeywell system sensor.
9
-
-
... More
Providing & fixing of 25 mm size Gunmetal Pressure Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge.
2
-
-
... More
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge. Make-HD/Tyco/Newage.
250
-
-
... More
EXTINGUISHER SYSTEM:-Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make-Safex/Minimax/Fireshield/Minimax.
24
-
-
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. Make-Safex/Minimax/Fireshield.
36
-
-
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.Make-Safex/Minimax/Fireshield.
10
-
-
... More
AUTOMATIC FIRE ALARMING SYSTEM:-Supplying installation testing and commissioning of Microprocessor based Addressable Fire Alarm Control Panel (2 loop ) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete withb) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire with provision for interface along PA Controller including call station in built suitable for 240 watt amplifier as per direction of Engineer-incharge.Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
2
-
-
... More
Supply, Installation, Testing & commissioning of Analog Addressable smoke cum heat detector or heat detector sensor with status indicator with inbuilt isolator module . Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
368
-
-
... More
Supply, Installation, Testing & commissioning of Addressable Manual Call Point soft addressable type with in built fault isolator as required. Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
18
-
-
... More
Supply, Installation, Testing & commissioning of Response Indicator complete as required.Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
85
-
-
... More
Supply, Installation, Testing & commissioning ofAddressable Loop Powered Hooter cum Strobe (sound output of minimum 90db) cum strobe (strength of light 10cd) complete with inbuilt isolator as required. Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
18
-
-
... More
Supply & Fixing of 2 core 1.5 sq.mm, multi strand, copper conductor, FRLS (Fire Retardent Low Smoke)-PVC insulated GI Screened Armoured cable with saddle and required accessories.& Power Cable. Make-Polycab/Havels/RR cable/KEI.
4050
-
-
... More
Supply, Installation, Testing & commissioning of Addressable transponder/ Monitor cum Control Modules (1 input + 1 output) for monitoring flow switches/Fire exit doors etc complete as required. Make: Morley/ Edward/ Notifier/ Hochiki/ Siemens
10
-
-
... More
Supply ,Installation ,Testing & Commissioning of Output Control Relay Module.Make: Morley/ Edward/ Notifier/ Hochiki/ Siemens
2
-
-
... More
Supplying, installation, testing and commissioning of Addressable Beam(Infrared) Detector including Transmitter & Receiver, complete with base and isolator as per direction of Engineer-in-charge.(Make:Morley/ Edward/ Notifier/ Hochiki/ Siemens)
1
-
-
... More
PA SYSTEM:-Supplying, installation, testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required .Make-Bosch/Honeywell/Bose.
1
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 1000 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make-Bosch/Honeywell/Bose.
1
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/15 Watt in ABS enclosure complete as required. Make-Bosch/Honeywell/Bose.
90
-
-
... More
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits. Make-Polycab/KEI/RR Cable
4500
-
-
... More
SIGNAGES:-Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Make-Prolite/Bajaj
30
-
-
... More
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Make-Prolite/Bajaj
18
-
-
... More
Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts. Make-Prolite/Bajaj
18
-
-
... More
Providing and fixing the signages "In case of fire pull down - with Manual call point symbol ". Size 6" x 8".Make-Prolite/Bajaj
18
-
-
... More
Providing and fixing the signages "Main fire alarm panel." Size 6" x 8". Make-Prolite/Bajaj
1
-
-
... More
Providing and fixing the signages "Assembly point - with symbol ( A2 Size)" - Size 17" x 22".Make-Prolite/Bajaj
4
-
-
... More
Illumination Glow light for Exit Indication with Battery Back-up. Make-Prolite/Bajaj
18
-
-
... More
Supplying and installing of in position signages "FIRE ORDER" it should be contain following matter on 3 mm thick "Opaque" PVC foam board of computerised cut,PVC non-reflective self adhesive vinyle painted foam board of 3'× 4' as per BIS specification A) Alert the security at security room by actuating manual call point located at strategic locations. B)evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points.C) If possible try to extinguish the fire by using nearest /suitable portable extinguisher or water from nearest wet riser. D)Be calm and don't give any room for panic.walk, don't run.E) If you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team.
9
-
-
... More
Action by security/receotion upon receipt of information through fire alarm or fire detectors or by using public address system.A) Alert the occupants by using public address system.B) Inform fire control through any one of the following phone number:101/ (local number) C)Refer evacuation plan from evacuating standard people. D) Guide the fire force on their to the seat of fier. E)In case of the casualties call ambulance by dialing number....... phone :................ Fax................, as per BIS specification.
9
-
-
... More
Supplying and installing of Fire Evacuation plan in A3 paper size 2 mm thick photoluminscent sign with acrylic cover and stud for mounting in complete as per the direction of engineer-in-charge.
18
-
-
... More
Supplying and installing of Fire Evacuation plan in A2 paper size 2 mm thick photoluminscent sign with acrylic cover and stud for mounting in complete as per the direction of engineer-in-charge.
9
-
-
... More
FIRE SUPPRESSION SYSTEM
-
-
-
... More
Supply , Installattion,Testing and Comissioning of 5LB Clean Agent System Complete with all Necessary Clean Agent FK-5-1512 /novec 1230 (UL listed )gas with PESO approved cvlinder fitting support and accessories,connected with CE,PI Mark & PESO approved DLP valve,End of line Adaptor and pressure switch Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof Make: Honeywell/SUPREMEX/FIREBOY/AMEREX
1
-
-
... More
Supply and Laying of Linear Pneumatic Heat Detection Tube with all Necessary Fittings & Supports.
40
-
-
... More
Supply , Installattion,Testing and Comissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should Have Provision for Integration with Fire Alarm/SCADA/BMS System.Make: Honeywe Make: Honeywell/SUPREMEX/FIREBOY/AMEREX
1
-
-
... More
Supply and Laying UPVC Pipe (80 schedule ) of Following Dia-Meter Burried in Ground at Appropriate Depth for Cable.
40
-
-
... More
DG SET
-
-
-
... More
Supplying, Installation, Testing and Commissioning of Diesel Generating Set having prime power rating of 750 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure complete in all respect and comprising of following and as per specification enclosed, suitable for outdoor installation with foundation as per approved drawing .make: Jackson/Kirloskar/Perkins/Eq approved make as per direction of Engineer-in-charge
2
-
-
... More
A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 750 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, outgoing terminals taken out for connecting to cable along with all accessories.
-
-
-
... More
B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of 990 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required.
C. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required.
-
-
-
... More
D. Syn. Panel: Synchronisation Panel including auto start,auto stop,auto load sharing,auto load management suitable for 750 KVA DG Set fabricated with 2.0 mm thickness CRCA Sheet duly Powder coated after Seven tank process and provided with Contactors as required along with Logic Controllers Relays including Aux. Relays, time delay relays, auto/manual selector Switch, ON/OFF Push Button, battery Charger. multi functional meter with RS Port, necessary instruments & indicating lamps suitable busduct termination/cable.Current rating breaker (Incomer side : 415V,1250A,4P,65A,ACB EDO WITH O/C,S/C,E/F,SPP WITH MICROPROCESSOR BASED RELEASES.Outgoing side: : 415V,2000A,4P,65A,ACB EDO WITH O/C,S/C,E/F,SPP WITH MICROPROCESSOR BASED RELEASES ) .BUSBAR Rating :2000A,65KA TPN AL BUS BAR With BUSCOUPLER 1600A,415V,4P 65 KA ACB EDO with O/C,S/C,E/F,SPP with Microprocessor based releases. make: Schneider(NW)/Siemens
-
-
-
... More
E. Acoustic Enclosur: The acoustic enclosure is made of 14/16 gauge CRCA sheet. The salient features of acoustic enclosure are:- The enclosure is of modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour.
-
-
-
... More
a)The Sheet metal components are Nine Tank pre treated before powder coating.
b)The door are gasketed with high quality EPDM gaskets to prevent leakage of sound as well as door handles are lockable type. c) Specially designed attenuators to control sound at air entry and exit points.
d) Adequate ventilation to meet total air requirements. e) Temprature of enclosure should not exceed beyond 5-7°C of ambient temperature.
f) There is a provision of emegency shut down from outside the enclouser.
g) Noise level; 75 DB (A) at 1 mtr Distance.
h).Microprocesser based DG set Monitoring,metering and control system with protection for Diesel Engine / Alternator and Automatic operation of DG set in case of mains failure.
DG set as above(including CCIG approval)
i) Providing and installation of exhaust pipe upto the roof level (height 15 mtr approx) along with building MS Supports & all arrangments as required.
j)DG to Syn. Panel through Bus tranking
k) Providing and installation of 5000 ltr capacity under ground tank for DG set (2 nos)
DG set as above(including CCOE approval)
Supply of Hand pump to pump the HSD fuel from barrels to the day tank with flexible hose pipes etc., 2 set
-
-
-
... More
2X80 KVA PRS UPS (30 MTS)
-
-
-
... More
Supply, installation, testing & commissioning of two no.2X 80KVA 3 phase PRS UPS System with inbuilt isolation transformer in parallel redundant configuration with SMF Battery for 30 minutes back up along with all accessories. The UPS should be IGBT based with 0.9 output power factor. Input voltage range 290 to 498VAC. With inbuilt static and maintenance bypass switch Overload on static Bypass - 14 times for 10 milli sec and 10 times for 100 milli sec. Transient Voltage Surge Suppressor - 160KA, 3 phase TVSS having all ten Mode Protection (L-L / L-G / L-N / N-G), response time 0.5 nano sec., EMI/ RFI attenuation: 40 dB Certification - Listed with UL1449 should be provided with each UPS. TVSS should be of same make as UPS. UPS should have inbuilt switch gear for input, output, Maintenance bypass, auto static bypass & Battery. UPS should have Self-capacity test feature – UPS should have the provision to test run in its full capacity without external load. INCLUDING 38 nos 100 ah smf battery ,rack and interlinks included . Make: vertiv/gutur /APC/Eq approved make as per direction of Engineer-in-charge
1
-
-
... More
HVAC VRF System
-
-
-
... More
Supplying Of Outdoor Unit For VRV System.
-
-
-
... More
Supply of fully factory assembled Variable Refrigerant Volume(VRV)-X type multi unit air condioning system with inverter type outdoor units with individual controller for cooling type operations.The VRV outdoor unit shall be equipped highly efficiency Hermetically sealed all inverter type scroll compressor(s) having at least 6 Pole motor & manufactured by OEM.The outdoor unit needs to be equipped with two compressors. The condenser fan should have minimum External Static Pressure of 78 Pa so as to avoid short cycling of hot air and refrigerant cooled PCB for enhanced reliability during peak temperature.The Outdoor unit must be capable of Varying the Refrigerant Temperature(VRT) in order to work more efficiently. make: Daikin/Ogeneral/Mitsubishi/ Hitachi/ eq. make
-
-
-
... More
Outdoor Unit of Nominal Capacity -28HP .
1
-
-
... More
Outdoor Unit of Nominal Capacity -54 HP .
1
-
-
... More
Outdoor Unit of Nominal Capacity -60 HP .
7
-
-
... More
Supply Indoor units for VRV systems with Remote & Refnets.
-
-
-
... More
Round Flow Indoor unit complete with cooling coil,electronic expansion valve , electrical control box inspection inlet for easy access to the unit , capable to operate at power source 1 Phase ,220-230-240V, 50Hz and other accessories as required for smooth operation of the system of the following capacities. Make:Daikin/Ogeneral/Mitsubishi
-
-
-
... More
Nominal Capacity - 0.82TR
6
-
-
... More
Nominal Capacity - 1.06TR
1
-
-
... More
Nominal Capacity - 1.32TR
6
-
-
... More
Nominal Capacity - 2.08 TR
13
-
-
... More
Nominal Capacity - 2.65TR
13
-
-
... More
Nominal Capacity - 3.3 TR
13
-
-
... More
Nominal Capacity - 4.12TR
76
-
-
... More
Nominal Capacity - 4.65TR
1
-
-
... More
D-III Net plus adaptor for I-Touch Controller
1
-
-
... More
HTTP License for I-Touch Controller
2
-
-
... More
Central remote controller
1
-
-
... More
Installation ,testing and commissioning of VRV systems in below mention details :-
-
-
-
... More
VRV Out door unit
-
-
-
... More
Outdoor Unit of Nominal Capacity -28HP .
1
-
-
... More
Outdoor Unit of Nominal Capacity -54 HP .
1
-
-
... More
Outdoor Unit of Nominal Capacity -60 HP .
7
-
-
... More
Installation of Indoor Unit
-
-
-
... More
R.F CASSETTE AC with Cordless Remort
-
-
-
... More
Nominal Capacity - 0.82TR
6
-
-
... More
Nominal Capacity - 1.06TR
1
-
-
... More
Nominal Capacity - 1.32TR
6
-
-
... More
Nominal Capacity - 2.08 TR
13
-
-
... More
Nominal Capacity - 2.65TR
13
-
-
... More
Nominal Capacity - 3.3 TR
13
-
-
... More
Nominal Capacity - 4.12TR
76
-
-
... More
Nominal Capacity - 4.65TR
1
-
-
... More
Refrigerant gas R410A
445
-
-
... More
Supply,installation, testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping. Make- Rajco/Mandev
-
-
-
... More
Suction Line pipe with 19mm thick insulation
-
-
-
... More
41.3 mm
350
-
-
... More
34.9mm
271
-
-
... More
28.6 mm
315
-
-
... More
22.2 mm
305
-
-
... More
19.1 mm
218
-
-
... More
15.9 mm
340
-
-
... More
12.7 mm
135
-
-
... More
Liquid Line pipe with 13mm thick insulation
-
-
-
... More
19.1 mm
614
-
-
... More
15.9 mm
180
-
-
... More
12.7 mm
185
-
-
... More
9.5 mm
913
-
-
... More
6.4mm
135
-
-
... More
Supply, installation, testing & commissioning of 2 core 1 sq.mm shielded copper control cum transmission wiring in PVC conduit between indoor & outdoor.
-
-
-
... More
2 C x 1 sq.mm Cu communication cable
3441
-
-
... More
Supply, installation, testing & Commissioning of following sizes insulated PVC drain pipes insulated with 9mm thick nitrile rubber insulation of following size
-
-
-
... More
40/32 mm Dia with 9mm Nitrile Rubber Insulation
1380
-
-
... More
SITC OF 5 feet AHV Air Curtains (MAKE-ALMONARD)
8
-
-
... More
ELV
-
-
-
... More
Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit (NORPACK/ eq make) as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
36800
-
-
... More
Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit
-
-
-
... More
I/O Single
122
-
-
... More
I/O Dual
271
-
-
... More
Supply and installation of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Tyco / Legrand / Panduit
40
-
-
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit
-
-
-
... More
1mtr Lenghth
800
-
-
... More
2mtrs Length
450
-
-
... More
Supply and installation of 24x 10/100/1000 Ethernet L2 Fully Managed Switch with , 4x 1/10G SFP uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 ACLs with Dedicated USB managed ports. Make: Cisco
8
-
-
... More
Supply and installation of 24x 10/100/1000 24 Port Gigabit Layer 2 Managed POE Switch with 2 Combo and 2 Gigabit SFP Ports (support IEEE802.3at, Power Budget 270Watts). Make: Cisco
39
-
-
... More
SITC of 24 Port 1000Mbps SFP Layer 3 Switch includes 16 Gigabit Combo ports, 8 Gigabit SFP additional 4 x 1G/10G SFP+ ports, 2 x 20G stacking ports. Supports Dual Hotswappable Power Supplies. (Default Shipped with Single Power Supply) . Supports OSPF v2/v3,BGP4+,VRRP. Make: Cisco
1
-
-
... More
Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco
15
-
-
... More
Supply and installation of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: CISCO
34
-
-
... More
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
1200
-
-
... More
Supply and installation of 24 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 24 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand / Digisol
2
-
-
... More
Supply and installation of 12 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand / Digisol
8
-
-
... More
Supply and installation of 6 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 6 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand / Digisol
10
-
-
... More
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db. Make: Tyco / Legrand / Digisol
34
-
-
... More
Supply and installation of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW
9
-
-
... More
Supply and Installation of 24U 600/650D UL Listed Floor mount Rack with Front glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 1 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make: Valrack/Rittal/ APW
8
-
-
... More
SITC of 42U 600/1000D UL Listed Floor mount Rack with Front glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make: Valrack/Rittal/ APW
1
-
-
... More
Supply and installation of Next Generation Firewall support minimum 500usres with min 27Gbps of IPv4 firewall throughput for 1518 Bytes UDP packet, with 3years subscription licence (IPS, Advanced Malware Protection, Application Control, Web & Video Filtering, Antispam Service, and 24x7 Support). Make: Fortigate/Sonicwall/Gajshield
1
-
-
... More
IP Intercom System:Supply and installation of IP PBX System support up to 2000 users and minimum 60 concurrent calls, integrated 4 PSTN trunk FXO ports through External Gateway, 4 analog telephone FXS ports with lifeline capability and up to 50 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs. Make: Grandstream/NEC/Mitel
1
-
-
... More
Supply and installation of IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset. Make: Grandstream/NEC/Mitel
242
-
-
... More
Supply and installation of IP Based PoE Anroid Video Phone having 7" Dispaly, with min16 line with up to 16 SIP accounts, Built-in 1 mega-pixel CMOS tiltable camera for video calling with privacy wheel, Runs on the Android 7.0 operating system, Built-in Bluetooth for syncing with BLE Audio Devices. Make: Grandstream/NEC/Mitel
3
-
-
... More
Supply and installation of Operator Console with 6 Lines, 6 SIP Accounts, PoE + GigE, Color, 24 BLF Keys including 4Lines, 4 SIP Accounts, IP Base PoE Phone. Make: Grandstream/NEC/Mitel
1
-
-
... More
IP CCTV Surveillance System:SITC of 5MP Dome/Bullet IR Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require. Make- Honeywell performance series 35/Bosch/Axis /Pelco
87
-
-
... More
SITC of 64Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade. Make- Honeywell 4k NVR /Bosch
2
-
-
... More
SITC of 8TB Surveillence Hardisk. Make: Segate/WD
8
-
-
... More
Supply and Installation of 55" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung/ LG /SONY
2
-
-
... More
1st Floor to 6th Floor: SITC of 65" 4K Ultra HD resolution Touch Interactive Display, Brightness 350 nit, HDMI (3), RJ45(LAN), HDMI Out (1), Touch USB (2) along with professional AV Connectivity. It should include OPS slot with Should support Digital whiteboard software, Content Sharing Software.
Make : LG / Samsung/peoplelink
12
-
-
... More
SITC of OPS with Intel core i5 PC, 8 GB Ram, 1 TB HDD, 256gb ssd Windows 10 License Make: dell/HP/lenovo
12
-
-
... More
SITC of 4x4 USB 3.2 Matrix. It allows 4 x USB devices to be shared between 4 x host devices, supporting Plug-and-Play. The USB data transfer rate is up to 5Gbps.
Make: Milestone / Aten / AdonisAV
12
-
-
... More
SITC of Full High Definition PTZ Camera with 12X Optical and 12X Digital Zoom. 1/2.7” HD CMOS sensor. HDMI 2.0 and USB 3.0 synchronous Video output. 1080p60 resolution on both HDMI & USB3.0 Interface.
RJ-45 Port for Video Monitoring and Streaming Applications.Inbuilt RTSP/RTMP Server. 4 Infra Red Identities Inbuilt.Wide Viewing Angle of 72.5°.High frame rate of 60FPS on USB 3.0 port as well as HDMI Port.TCP/IP Control, RS-232 as well as RS 485 Control.
Make : AdonisAV / QSC / Vaddio
12
-
-
... More
SITC of Wireless and Wired Audio conference phone with 4 inbuilt Microphones & Speaker.Wireless RF Dongle Supplied.Noise reduction. Automatic Gain Control. High Definition voice processing technology. Acoustic Echo Cancellation.Speaker Frequency response: 100 Hz to 22000 Hz.Output level: 95dB at 1m. Volume Up/Down, Microphone Mute. Audio pickup range of 16 feet through inbuilt mics and 24 feet through extensions.6ft USB 2.0 connecting cable, Wireless Dongle, power Adaptor as standard Accessory. Make : AdonisAV / Clearone / Poly
12
-
-
... More
7th Floor:SITC of 75" 4K Ultra HD resolution Touch Interactive Display, Brightness 350 nit, HDMI (3), RJ45(LAN), HDMI Out (1), Touch USB (2) along with professional AV Connectivity. It should include OPS slot with Should support Digital whiteboard software, Content Sharing Software.
Make :LG / Samsung/peoplelink
1
-
-
... More
SITC of OPS with Intel core i5 PC, 8 GB Ram, 256 gb ssd 1 TB HDD, Windows 10 License
1
-
-
... More
SITC of 4x4 USB 3.2 Matrix. It allows 4 x USB devices to be shared between 4 x host devices, supporting Plug-and-Play. The USB data transfer rate is up to 5Gbps.
Make: Milestone / Aten / AdonisAV
1
-
-
... More
SITC of Full High Definition PTZ Camera with 12X Optical and 12X Digital Zoom. 1/2.7” HD CMOS sensor. HDMI 2.0 and USB 3.0 synchronous Video output. 1080p60 resolution on both HDMI & USB3.0 Interface.RJ-45 Port for Video Monitoring and Streaming Applications.Inbuilt RTSP/RTMP Server. 4 Infra Red Identities Inbuilt.Wide Viewing Angle of 72.5°.High frame rate of 60FPS on USB 3.0 port as well as HDMI Port.TCP/IP Control, RS-232 as well as RS 485 Control.
Make : AdonisAV / QSC / Vaddio
1
-
-
... More
SITC of Wireless and Wired Audio conference phone with 4 inbuilt Microphones & Speaker.Wireless RF Dongle Supplied.Noise reduction. Automatic Gain Control. High Definition voice processing technology. Acoustic Echo Cancellation.Speaker Frequency response: 100 Hz to 22000 Hz.Output level: 95dB at 1m. Volume Up/Down, Microphone Mute. Audio pickup range of 16 feet through inbuilt mics and 24 feet through extensions.6ft USB 2.0 connecting cable, Wireless Dongle, power Adaptor as standard Accessory. Make : AdonisAV / Clearone / Poly
1
-
-
... More
SITC of Wired boundry Extension microphones for Speakerphones.
Mic Mute/Unmute Button integrated with main Unit.
Supplied with 10 feet Extension Cable.
Make : AdonisAV / Clearone / Poly
1
-
-
... More
8th Floor:SITC of 145 Inch Indoor Active LED Screen which would be of Size approximately 3.20 Mtr x 1.80 Mtr (10.50 ft x 5.91 ft ). Pixel Pitch : 1.5 mm, Wall Resolution 2080 x 1170, Viewing angle - Horizontal & Vertical: 160°.
Make : LG / Samsung
1
-
-
... More
SITC of Wall Mounted base frame which would be site customized structure with maid out of powder coated material with high load bearing capacity.
Make : Custom
1
-
-
... More
SITC of Video Wall Processor modular plug-in design, with a variety of connector modules available. It comes with the control card and power supply. A minimum of 1 additional input card, and 1 output card is required for full functionality.
Make : LG / Samsung
1
-
-
... More
SITC of 55" UHD 4K Large Screen Signage Display Brightness : 350 nit, Resolution : ULTRA HD (3,840 x 2,160) Being slim, a closer installation to the wall is advised. Additionally, this increases the screen’s immersive experience and provides a sophisticated design. Make : LG / Sony
4
-
-
... More
SITC of Wall mount bracket for 55" display having load capacity upto 50 KG, VESA standard.
Make : Custom
4
-
-
... More
SITC of 17" Full HD Motorised monitor Features: Screen Size: 21.5", Resolution: 1920 X 1080,Tilting angle 90 to 150 degree, Pannel Size: 604.8 X 80mm, Video input Interface: HDMI, VGA, Tilting angle of 90 to 150 Degree adjustable, Up & Down Button. Make :
3
-
-
... More
SITC of HDMI Presentation Switcher with 8 nos of HDMI inputs and 8 nos of HDMI outputs which would enable selectable simultaneous input connections from various devices like Desktop,Laptop, Display, etc
Make: Milestone / Aten / AdonisAV
1
-
-
... More
SITC of Wireless Presentation Gateway allows presentation from multiple Devices and Multiple Platforms, Plug & Play systems. Supports upto 30 users. Transmission Bandwidth: 300m &Lossless Signal Transmission up to 40m. Works as Access Point for Connected Devices. Interface: HDMI Out, USB 3.0, USB 2.0, RJ-45, 3.5mm Line Interface. Supports signals up to 1080p@60fps. Wireless Switching and Interactive Function Application.Support Dual / Quard view layout. Supplied with four USB Based Wireless Tx. Supports Distance upto 40 Meters.
Make : Barco / AdonisAV / Cresron
1
-
-
... More
SITC of 55 ft HDMI Active Optical Cable Type A to Type A.Data rate of up to 18.2 Gbps, Support resolutions of up to 3820x2160@60 Hz, Power Consumption of 250mV, Dynamic bend radius of 80mm, Static bend radius of 40mm, Lossless signal transmission up to 100 meters, HDMI 2.0 or better. Support HDCP 2.2 or better.Outer diameter of 4mm or less. Highly resistant with RF and EMI interference.It shall work without the use of External Power Supplies.
Make : Extron / AdonisAV / Crestron
5
-
-
... More
SITC of 20 Mtr HDMI Active Optical Cable Type A to Type A.Data rate of up to 18.2 Gbps, Support resolutions of up to 3820x2160@60 Hz, Power Consumption of 250mV, Dynamic bend radius of 80mm, Static bend radius of 40mm, Lossless signal transmission up to 100 meters, HDMI 2.0 or better. Support HDCP 2.2 or better.Outer diameter of 4mm or less. Highly resistant with RF and EMI interference.It shall work without the use of External Power Supplies.
Make : Extron / AdonisAV / Crestron
4
-
-
... More
SITC of 5 Mtr HDMI Active Optical Cable Type A to Type A.Data rate of up to 18.2 Gbps, Support resolutions of up to 3820x2160@60 Hz, Power Consumption of 250mV, Dynamic bend radius of 80mm, Static bend radius of 40mm, Lossless signal transmission up to 100 meters, HDMI 2.0 or better. Support HDCP 2.2 or better.Outer diameter of 4mm or less. Highly resistant with RF and EMI interference.It shall work without the use of External Power Supplies. Make : Extron / AdonisAV / Crestron
3
-
-
... More
SITC of Full High Definition PTZ Camera with 20X Optical and 12X Digital Zoom. 1/2.8” HD CMOS sensor. HDMI 2.0 and USB 3.0 synchronous Video output. 1080p60 resolution on both HDMI & USB3.0 Interface.
RJ-45 Port for Video Monitoring and Streaming Applications.High frame rate of 60FPS on USB 3.0 port as well as HDMI Port. TCP/IP Control, RS-232 as well as RS 485 Control.
Make : AdonisAV / Sony / Vaddio
1
-
-
... More
SITC of 72' USB 3.0 Active Optical Cable Only. Support data rate of upto 5Gbps. Support resolutions of upto 1080p@60 Hz or higher.Support USB 3.0.Resistant with RF and EMI interference. 4mm Cable OD.
Make : Crestron / Extron / AdonisAV
1
-
-
... More
SITC of Table Top Wired Chairman unit with Gooseneck length 27 CM / 270MM or Less. Frequency Response (Microphone): 75 Hz - 17000 Hz (-3 dB) or better. Inbuilt speaker for better local sound reinforcement, and Frequency Response (Loudspeaker) minimum 60Hz – 20000 Hz or better. Capacity Touch Button: Touch to Speak. It shall have Priority button or better. Immune to Mobile Phone Interference. Pattern: Super Cardioid (Shielded Microphone ). Microphone on/off button. Headphone connection: 3.5 mm stereo jack Headphone Load: 16 – 32 Ω or better. Volume control knob. Max Vol (Headphone): 40mW or better. Frequency Response (Processor) 20 Hz – 20000 Hz (-3 dB) or better. Humidity: 10-85%. The microphone should have a LED indication. Built in loudspeaker with volume control and headphone out Built in digital signal audio processing for feedback and reverberation management.
Make : Brahler / Beyerdynamic / AdonisAV
3
-
-
... More
SITC of Table Top Wired Delegate unit with Gooseneck length 27 CM / 270MM or Less. Frequency Response (Microphone): 75 Hz - 17000 Hz (-3 dB) or better. Inbuilt speaker for better local sound reinforcement, and Frequency Response (Loudspeaker) minimum 60Hz – 20000 Hz or better. Capacity Touch Button: Touch to Speak. Immune to Mobile Phone Interference. Pattern: Super Cardioid (Shielded Microphone ). Microphone on/off button. Headphone connection: 3.5 mm stereo jack Headphone Load: 16 – 32 Ω or better. Volume control knob. Max Vol (Headphone): 40mW or better. Frequency Response (Processor) 20 Hz – 20000 Hz (-3 dB) or better. Humidity: 10-85%. The microphone should have a Red LED indication which shows when the microphone is activated. The microphone should have a LED indicator. Built in loudspeaker with volume control and headphone out Built in digital signal audio processing for feedback and reverberation management.
Make : Brahler / Beyerdynamic / AdonisAV
26
-
-
... More
SITC of Digital central Microphone controller to manage and control the above Chairman & Delegate microphones. The Control Unit shall have USB port for Recording & Playback.Inbuilt software for conference management. Built in high-end dual CPU processor for meeting, when heavy processing requirements.The core has minimum 96-bit and 50 MIPS digital audio signal processor or better.Minimum coders supports sample rates from 8KHz to 96KHz or better. 4-channel conference unit output interface or More. 1 balance & 1 unbalance input interface or More. 1 balance & 1 unbalance output interface or More. It should have Native RS-232 & RS-485 Camera Control port to for achieve Look at Me Function or better. Two or more RJ-45 Interface for control or better. The Look at me function also work on voice activation Mode or better. Frequency Response of 20 Hz – 20000 Hz or better. S/N Ratio of 85dB or better. Thermal Harmonic Distortion of 0.05% or better. Crosstalk ≤50dB.The controller should have feedback suppression and noise cancellation or better. Inbuilt minimum 2x 25 Watts @4Ω Amplifier, support local reinforcement in case main amplifier failed.Touch Screen Control at front panel for all easy control or better. Approved Make : Brahler / Beyerdynamic / AdonisAV
1
-
-
... More
SITC of 10 MTR 6 PIN conference cable for conference system. The cable should be from the same OEM as of the conference system. Make : Brahler / Beyerdynamic / AdonisAV
1
-
-
... More
SITC of 350 Watts or more Mixing Amplifier. Microphone frequency response of 40Hz- 17000Hz or better. Line Frequency Response of 40 Hz-18000 Hz or better. Minimum impedance load bridged of 4 ohms per channel. 4 or more balanced microphone inputs. Phantom power individually for four microphone inputs with It shall have 4 or more line inputs. Balanced Three Pin XLR/Phoenix Line Audio output. 1 Pre output and 1 unbalanced Line output or better. Input sensitivity of ± 2.5 mV/ 2kΩ for balanced Microphone. Input sensitivity of 1000 mV/10kΩ, Unbalanced RCA Input for Amp Input. It shall have input sensitivity of 350mV/10kΩ for unbalanced Aux input. Output sensitivity of 200mV/470Ω for record output. 100V line, 70V line as well as 4 to 16-ohm impedance output. THD of 0.1% at 1 KHz, 1/3 rated Power or better. Microphone input overload of fifteen db. or greater. The microphone inputs shall override over other audio inputs by 30 dB. Gain control of ± 2.5mV to ± 75mV@ 30dB. Cross talk of ≤ 50 dB or better. Auto cooling function at 55 degrees Celsius.High It shall get operated from AC as well as DC.
Make : Powersoft / AdonisAV / TW Audio
1
-
-
... More
SITC of Wireless Handheld Microphone. Enable the use of professional RF accessories, Allows the use of up to 8 channels simultaneously, Professional balanced XLR or unbalanced 1⁄4" jack output, Audio clip and RF control LED on receiver, Adjustable squelch level.
Make : AKG / Audiotechnica / Sennheiser
4
-
-
... More
SITC of Wall Mount 40 watts column 10x2" Speakers which shall have 5.25 Inches. Driver and 2-Inch-High Frequency Driver.Frequency response of 120 Hz to 20,000. Speaker less than this range shall not be accepted. The two-way speaker shall have 70V,100V tapping. The speaker shall have a maximum SPL of 107dB. The Speaker shall have 60 Watts or more Dynamic Power (Low Impedance). Transformer tapping of 40,20,10,5 Watts or more. Waterproof (IP 55 Equivalent) wall Mount Speaker. Aluminium design Make : Audac Lino10
6
-
-
... More
SITC of Digital Signal Processer with inbuilt Acoustic Echo Cancellation which shall have 6 or more Line Input and 2 or more Line Output Terminal. It shall have USB Type-B Audio Port for software VC application. It shall have inbuilt Echo Cancellation. it shall have Full duplex, Two-way communication. It shall support Noise Reduction & AGC.
Make : Biamp / Sennheiser / Audiotechnica
1
-
-
... More
SITC of Speaker Cable,Microphone cable, Audio Patch Cords, USB 2.0 Cables, and other cables & Connectors to complete the site in all respect.
1
-
-
... More
SITC of 17U AV Equipment Rack with 6 Port PDU, Rack shelf, Cooling fan, Front Glass door lockable. Make- Valrack/Legrand
1
-
-
... More
LA System
-
-
-
... More
Supply of 8 mm Aluminum Round Conductor.
Tested as per IEC 62561. as per direction of engineer in charge make: OBO/DEHN
770
-
-
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge. make: OBO/DEHN
833
-
-
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561.make: OBO/DEHN
62
-
-
... More
Providing of cross universal connector: for T and cross connection to route Vertical down conductor/mesh formation made of hot dipped galvaniseh iron with necessery screws etc as required.Installation with 4 hexagonal bolts M8*25 with M8 hexagonal nuts.make: OBO/DEHN
40
-
-
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).make: OBO/DEHN
20
-
-
... More
Providing Expansion Piece with connector for equalising tempereture related length changes. Necessary on conductors length over 20 mtrs.for Round conductor Rd 8/ALU
10
-
-
... More
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current.make: OBO/DEHN
8
-
-
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size Ø10/16 mm aluminium rod:
2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561.make: OBO/DEHN
6
-
-
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size Ø10/16 mm aluminium rod:
4 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561.make: OBO/DEHN
6
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current .make: OBO/DEHN
38
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost
resistant concrete. make: OBO/DEHN
38
-
-
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current.make: OBO/DEHN
22
-
-
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm. make: OBO/DEHN
22
-
-
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561.make: OBO/DEHN
588
-
-
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm
Galvanised steel strip. Installed with 4 nos of hexagonal plate.
Tested for 100kA lightning current.make: OBO/DEHN
54
-
-
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561.make: OBO/DEHN
54
-
-
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibrefabric.make: OBO/DEHN
4
-
-
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2make: OBO/DEHN
28
-
-
... More
Supply of universal clamp made of SS to connect rod with flat
conductormake: OBO/DEHN
28
-
-
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested.make: OBO/DEHN
28
-
-
... More
Supply of The above arrangements shall be provided with Heavy dutyearth champer of 5000kg load bearing capacity to ensure the
safety of earthing systemmake: OBO/DEHN
28
-
-
... More
Supply of M10X50 SS Screw and Grip.make: OBO/DEHN
1688
-
-
... More
Installation of The above arrangements make: OBO/DEHN
2
-
-
... More
External 2 X 1250 KVA Transformer & 3 nos HT 800 A VCB
-
-
-
... More
SITC of 1250 kva 11/0.433kv,Dyn11,ONAN, BIS level III, Copper wound Transformer having provision of OLTC,RTCC panel ,OTI,WTI and required accessories as per IS 1180 standard in complee as per the direction of engineer incharge. factory test will be done before despatch in presence if engineer incharge at factory site .make: Kirloskar/Schneider/Crompton Greaves
2
-
-
... More
Supply of 3 nos 11KV, 800A, 26.3KA FOR 3 SEC DRAWOUT TYPE VCB WITH MOTORISED SPRING CHARGE MECHANISM ( 1 incomer + 2 nos outgoing for 2 nos transformer) SUITABLE FOR 240VAC, WITH CLOSING & TRIPPING COILS FOR 110V DC. FULLY COMPARTMENTALISED SHEET STEEL TOTALLY ENCLOSED FLOOR MOUNTED WITH SAFETY SHUTTERS, HORIZONTAL DRAWOUT & MOUNTED WITH SAFETY SHUTTERS, HORIZONTAL ISOLATION, ALONG WITH INSULATED PVC SLEEVE FOR (800A ALUMINIUM.
BUSBAR), FOUNDATION BOLTS ETC WITH PROVISION
FOR TERMINATING PLIC/XLPE CABLE RESIN CAST, DUAL CORE CTS HAVING CT Ratio 150/5+5A WITH CORE 1 : 15VA, CL-1.0, CORE 2 : 15VA, CL: 5P10 RESIN CAST, DUAL CORE CTS HAVING CT Ratio 75/5+5A
WITH CORE 1 : 15VA, CL-1.0, CORE 2 : 15VA, CL: 5P10 1-PH PT- 11KV/RT3/110V/RT3, 100VA , CL-1.0 WITH
FUSES FOR PRIMARY AND SECONDARY CIRCUIT AND
OVF: 1.2 CONT. AND 1.9 TIMES FOR 8 HOURS, NUMERICAL FEEDER PROTECTION RELAY WITHOUT
RS485, MASTER TRIP RELAY, AUXILIARY RELAY FOR TRANSFORMER SUPERVISION .(Make : Schneider/siemens/ABB)
1
-
-
... More
Supply of 110 volt DC supply with battery charger 2 hours back up
1
-
-
... More
P.H. WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
25
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
50
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
150
-
-
... More
In 1st Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
120
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
30
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 2nd Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
80
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 3rd Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
80
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 4th Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
80
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 5th Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
80
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 6th Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
35
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
80
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
In 7th Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
40
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
90
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
40
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
20
-
-
... More
In 8th Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
30
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
60
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
10
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
30
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astral)
20
-
-
... More
In 9th Floor
-
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
60
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
150
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
250mm thick wall in Ground floor
5
-
-
... More
In 1st Floor
10
-
-
... More
In 2nd Floor
10
-
-
... More
In 3rd Floor
10
-
-
... More
In 4th Floor
10
-
-
... More
In 5th Floor
10
-
-
... More
In 6th Floor
10
-
-
... More
In 7th Floor
10
-
-
... More
In 8th Floor
7
-
-
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
3
-
-
... More
In 1st Floor
5
-
-
... More
In 2nd Floor
5
-
-
... More
In 3rd Floor
5
-
-
... More
In 4th Floor
5
-
-
... More
In 5th Floor
5
-
-
... More
In 6th Floor
5
-
-
... More
In 7th Floor
5
-
-
... More
In 8th Floor
5
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
65
-
-
... More
In 1st Floor
155
-
-
... More
In 2nd floor
155
-
-
... More
In 3rd Floor
155
-
-
... More
In 4th Floor
155
-
-
... More
In 5th Floor
155
-
-
... More
In 6th Floor
155
-
-
... More
In 7th Floor
160
-
-
... More
In 8th Floor
120
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall
-
-
-
... More
in Ground Floor to 8th Floor
150
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
27
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
120
-
-
... More
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
19
-
-
... More
15mm dia CP two in one bib cock (Con-CHR-CHR-041KN Jaquar make)
28
-
-
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
28
-
-
... More
15mm dia CP extension piece
281
-
-
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
44
-
-
... More
25mm dia G.M or Brass F.W valve (Sakti make)
40
-
-
... More
40mm dia G.M or Brass F.W valve (Sakti make)
10
-
-
... More
125mm dia CP gratings
150
-
-
... More
15mm CP revolving shower (Jaquar)CON-CHR-209KN
10
-
-
... More
15mm dia CP auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)
25
-
-
... More
50mm dia G.M or Brass F.W valve (Sakti make)
8
-
-
... More
15mm dia CP Bib cock(Jaquar)CON-CHR-049NKN
10
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
10 litres PVC L.L. Cistern (Slimline-white)
39
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing C.I.(Hubeless)soil waste ventilating pipes and fittings of the following with suitable clamps having provision for removal diameter conforming to ISI No. 15905 to walls with shelded(S/S) coupling with EPMD rubber gasket method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
75mm dia C.I. pipe (NECO make)
200
-
-
... More
75mm C.I. plain bend(NECO make)
50
-
-
... More
100mm dia C.I. pipe (NECO make)
1200
-
-
... More
100mm C.I. door bend(NECO make)
60
-
-
... More
100mm C.I. door Tee(NECO make)
160
-
-
... More
100mm C.I. Plain Tee(NECO make)
110
-
-
... More
100mm C.I. offset(NECO make)
29
-
-
... More
100mm C.I. plain bend(NECO make)
58
-
-
... More
100mm C.I. cowl(NECO make)
19
-
-
... More
100mm C.I. P trap(NECO make)
108
-
-
... More
100mm S/S coupling with EPMD
600
-
-
... More
75mm S/S coupling
50
-
-
... More
W/C connector
44
-
-
... More
MS Clamp fixed at site
600
-
-
... More
100mm C.I. door Cross Tee(NECO make)
20
-
-
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)
-
-
-
... More
580mm size Orissa pan(Hindware/Parryware/Neycer)
16
-
-
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Halfstall Urinal(Parryware/Hindware/Neycer)
25
-
-
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
E.W.C. with seat cover (Parryware/Hindware/Neycer)
23
-
-
... More
One piece commod(Hindware)ELEMENT Cat No.92084.
5
-
-
... More
EWC(Matrix set)No.70002(P-18)
9
-
-
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
18
-
-
... More
Under Counter basin(560x450)Hindware-No.10095
42
-
-
... More
Half pedestal basin(Hindware)No.91049+91115
2
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
600mm x 450mm size B.E mirror
27
-
-
... More
Large size mirror with frame(70x0.90x0.90)
-
-
-
... More
42x0.90x0.60=
22.68
-
-
... More
Design mirror(Parryware)
2
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P
27
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
10
-
-
... More
CP towel Ring(Jaquar)ACN-ACR-1121N
62
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Jaquar)ACN-ACR-1131N
107
-
-
... More
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
2
-
-
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 450 x 250mm size S/S kitchen sink (Jayana make )
17
-
-
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
7.64
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
2.55
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. In Ground Floor
1.27
-
-
... More
In 1st Floor
3.74
-
-
... More
In 2nd Floor
3.74
-
-
... More
In 3rd Floor
3.74
-
-
... More
In 4th. Floor
3.74
-
-
... More
In 5th. Floor
3.74
-
-
... More
In 6th. Floor
3.74
-
-
... More
In 7th. Floor
4.86
-
-
... More
In 8th. Floor
3.74
-
-
... More
Supplying all materials, labour, T&P and providing cement flush pointing with C.M (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
91.73
-
-
... More
In Ist Floor
170.3
-
-
... More
In 2nd Floor
170.3
-
-
... More
In 3rd Floor
170.3
-
-
... More
In 4th. Floor
170.3
-
-
... More
In 5th. Floor
170.3
-
-
... More
In 6th. Floor
170.3
-
-
... More
In 7th. Floor
230.54
-
-
... More
In 8th. Floor
170.3
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ist Floor
53.7
-
-
... More
In 2nd Floor
53.7
-
-
... More
In 3rd Floor
53.7
-
-
... More
In 4th. Floor
53.7
-
-
... More
In 5th. Floor
53.7
-
-
... More
In 6th. Floor
53.7
-
-
... More
In 7th. Floor
71.16
-
-
... More
In 8th. Floor
53.7
-
-
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1'6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.
-
-
-
... More
In Ist Floor
53.7
-
-
... More
In 2nd Floor
53.7
-
-
... More
In 3rd Floor
53.7
-
-
... More
In 4th. Floor
53.7
-
-
... More
In 5th. Floor
53.7
-
-
... More
In 6th. Floor
53.7
-
-
... More
In 7th. Floor
71.16
-
-
... More
In 8th. Floor
53.7
-
-
... More
Supplying all materials, labour, T&P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ist Floor
11.19
-
-
... More
In 2nd Floor
11.19
-
-
... More
In 3rd Floor
11.19
-
-
... More
In 4th Floor
11.19
-
-
... More
In 5th Floor
11.19
-
-
... More
In 6th. Floor
11.19
-
-
... More
In 7th. Floor
14.54
-
-
... More
In 8th. Floor
11.19
-
-
... More
Supplying all materials, labour, T&P and providing Vetrified mat finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc complete as per direction of the Engineer in charge. (vitrified tiles of size 600x600 of make- Kajaria/Somany/Johnson/OASIS plain/printed series to be pre-approved by the Engineer in charge)
In Ground Floor(Kajaria-Fogparla or equivalent make)
25.46
-
-
... More
In 1st Floor
37.33
-
-
... More
In 2nd Floor
37.33
-
-
... More
In 3rd Floor
37.33
-
-
... More
In 4th. Floor
37.33
-
-
... More
In 5th. Floor
37.33
-
-
... More
In 6th. Floor
37.33
-
-
... More
In 7th. Floor
48.49
-
-
... More
In 8th. Floor
37.33
-
-
... More
Supplying all materials, labaour, T&P and fixing ceramic glazed tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer-in-charge.(ceramic vitrified Glazed tiles in wall of size 600x300 ) of make Kajaria/Somany/Johnson/OASIS) plain/printed series to be pre-approved by the Engineer-in-charge. in Ground Floor(Kajaria-Durenmarfil or equivalent make)
-
-
-
... More
In Ground Floor
91.73
-
-
... More
In Ist Floor
170.3
-
-
... More
In 2nd Floor
170.3
-
-
... More
In 3rd Floor
170.3
-
-
... More
In 4th. Floor
170.3
-
-
... More
In 5th. Floor
170.3
-
-
... More
In 6th. Floor
170.3
-
-
... More
In 7th. Floor
230.54
-
-
... More
In 8th. Floor
170.3
-
-
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge.
128.53
-
-
... More
Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge.
487.5
-
-
... More
Finishing wall surface with providing two coats wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
-
-
-
... More
In Ground Floor
45.86
-
-
... More
In Ist Floor
65.47
-
-
... More
In 2nd Floor
65.47
-
-
... More
In 3rd Floor
65.47
-
-
... More
In 4th. Floor
65.47
-
-
... More
In 5th. Floor
65.47
-
-
... More
In 6th. Floor
65.47
-
-
... More
In 7th. Floor
90.67
-
-
... More
In 8th. Floor
65.47
-
-
... More
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
45.86
-
-
... More
In Ist Floor
65.47
-
-
... More
In 2nd Floor
65.47
-
-
... More
In 3rd Floor
65.47
-
-
... More
In 4th. Floor
65.47
-
-
... More
In 5th. Floor
65.47
-
-
... More
In 6th. Floor
65.47
-
-
... More
In 7th. Floor
90.67
-
-
... More
In 8th. Floor
65.47
-
-
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
9
-
-
... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 760mm x 760mm x 460mm
8
-
-
... More
Fitting and fixing RCPC cover slab (0.45m dia)
8
-
-
... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
56.7
-
-
... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
71.1
-
-
... More
Construction of 30000 Litr.Capacity RCC Over head water storage tank(Domestic & Fire fighting)-In Ninth floor
-
-
-
... More
R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
In Ninth floor
-
-
-
... More
RCC in Column
0.19
-
-
... More
RCC in roof beam
1.49
-
-
... More
RCC in roof slab
7.92
-
-
... More
RCC Wall
7
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
In Ninth floor
17.44
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
In Ninth floor
60.02
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.In Ninth floor
60.02
-
-
... More
Priming one coat with water bound wall cement primer. In Ninth floor
60.02
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. In Ninth Floor
60.02
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
90
-
-
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
30
-
-
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
In Ninth floor
60.02
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquagurd Pure Chill 120 PSS UV
9
-
-
... More
EXTERNAL PH WORK
-
-
-
... More
Sinking of 200 mm dia (8") Gravel Packed Production Well including saline sealing where necessary through Rotary Drilling Rig 300 Mtrs with PVC/ GI Casing Pipes 2 Nos
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion.
-
-
-
... More
00 mtrs. to 100 Mtrs.
150
-
-
... More
Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials.
-
-
-
... More
00 mtrs. to 300 Mtrs.
150
-
-
... More
Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
2
-
-
... More
Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia P.V.C. Casing pipe etc all complete as per the direction of the Engineer-in-Charge. (Excluding the cost of Cement.)
2
-
-
... More
Supplying all labour,T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc complete as per the direction of the Engineer-in-Charge.
2
-
-
... More
Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-Charge
2
-
-
... More
Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition.
200
-
-
... More
Supplying the following materials, Carrage ,labour for loading and unloading from store to site etc all complete as per direction o Engineer-in-charge.
-
-
-
... More
Cost of 200 mm dia PVC Pipe
151
-
-
... More
Cost of cement
10
-
-
... More
Cost of sand 75m
4
-
-
... More
washed gravel
4
-
-
... More
Cutting slots in casing pipe
20
-
-
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
2HP Three Phase 5 stage submersible pump set.
2
-
-
... More
DOL control panel
2
-
-
... More
50mm S. S. Nipple, S. S. bolt & clips
4
-
-
... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
2
-
-
... More
2.50mm Sqm Submersible flat cable
300
-
-
... More
Steel rope with cover
120
-
-
... More
20mm dia rigid U-PVC pipe
60
-
-
... More
50mm dia HDPE pipe
120
-
-
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
-
... More
Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
5 HP 3 phaseHorizontal submerssible pump set.
2
-
-
... More
DOL control panel
2
-
-
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
-
... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge
-
-
-
... More
50mm dia PVC ASTM
100
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge
-
-
-
... More
50mm dia CPVC pipe (sch-80)
10
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
-
-
-
... More
300m x 0.45m x 0.60m =81.00
81
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
... More
50mm dia Brass N. R. Valve
3
-
-
... More
50mm dia Brass Check Valve
1
-
-
... More
50mm dia Brass F. W. Valve
4
-
-
... More
Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 250mm x 250mm x 560mm
4
-
-
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 910mm x 910mm x 910mm
10
-
-
... More
Addl depth
5
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
60
-
-
... More
160mm dia u-pvc pipe alround concrete
80
-
-
... More
200mm dia u-pvc pipe alround concrete
100
-
-
... More
Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm
4
-
-
... More
Cost of RCPC Cover
4
-
-
... More
Rain Water Disposal System
-
-
-
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 910mm x 910mm x 910mm
6
-
-
... More
Addl depth
6
-
-
... More
Cost of RCPC Cover
6
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
160mm dia u-pvc pipe alround concrete
100
-
-
... More
200mm dia u-pvc pipe alround concrete
150
-
-
... More
Construction of 200000 Liters RCC UGR for Fire Fighting, 30000 ltrs UGR for Domestic use and Pump House of Inside size- 12.00 X 7.500 X3.50m
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
198.72
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
52.99
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
35.64
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
35.64
-
-
... More
R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
31.75
-
-
... More
RCC Wall
59.42
-
-
... More
RCC Lintle
0.22
-
-
... More
Roof Slab -
21.43
-
-
... More
Beam -
0.8
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
113.14
-
-
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
5.2
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
456.2
-
-
... More
Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:4) over Brick work including watering curring and conveyance of all materials to site.
108.74
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
456.2
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
200
-
-
... More
Supplying and fitting and fixing MS door and windows with grill including welding with elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
300
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
3
-
-
... More
STP 20 KLD
-
-
-
... More
Civil works -
-
-
-
... More
Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.
97.83
-
-
... More
From 1.5 Mtr upto 3.0 Mtr Depth
93.15
-
-
... More
Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
63.66
-
-
... More
Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge.
127.32
-
-
... More
Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.
9.79
-
-
... More
Providing and laying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
9.79
-
-
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
... More
(A) R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
8.25
-
-
... More
(B) R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
... More
Ground Floor
5.01
-
-
... More
(D) R.C.C. stairs excluding landing but including railing.
2.98
-
-
... More
Basement Floor
0.98
-
-
... More
(E) R.C.C. walls and fins including attached pillasters.
-
-
-
... More
Basement Floor
13.28
-
-
... More
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment.)
-
-
-
... More
Ground Floor
30.5
-
-
... More
Providing 6mm thick cement plaster in cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge
-
-
-
... More
Basement Floor
168.9
-
-
... More
Providing and applying water sellable-basic polymer-hydrophilic water stops Supercast SW20 or equivalent at all construction joints, Supercast SW20 shall have unrestrained volumetric expansion up to 300%, Shore A hardness of 25 to 35, Hydrostatic pressure resistance of 100 meters. Supercast SW20 shall be fixed to the concrete using Supercast SWX a gun grade hydrophilic adhesive. following strictly the instruction as per manufacture cost is excluding taxes(wct & st)
-
-
-
... More
All Floors
50
-
-
... More
Electro Mechanical items
-
-
-
... More
MS bar Screen : Supplying , installing , testing and commissioning of 1 No. bar screen in the existing civil structure infront of the intake works , so as to exclude the large sized particles with associated set of guide angles in MS flat of 10.00 mm screen kept inclined at 45 degree to the horizontal at 40 mm c/c with one no. handrack in GI. (Necessary correction / modification required to be done in existing civil structure shall be done by the contractor at his own cost). Bar rack shall be fabricated from SS-304 bars to cover the width of the screen chamber with a racking arm for manual operation. Size: 10 mm
1
-
-
... More
Raw Sewage Pumps: Supplying, installing, testing and commissioning of 02 Nos (1W + 1S) centrifugal, Non - Submersible type raw sewage water pumps with a solid handling capacity of 40 mm to pump sewage from equalisation sump to aeration tank at uniform flow rate. The pump shall be three phase, three HP electrical motor mounted on a common base frame each of these pumps shell also include. ( Make : Jhonson / Kriloskar / equi. )
1
-
-
... More
a). Dry run protection.
b) 1 No. Pressure gauge 4" dial with valve tee and fittings.
c) 2 nos. cast iron lever operted slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron) , with nitrile rubber seal , tested to 10 kg / sq. cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts , GI washers , and neoprene rubber gaskets Complete etc. ( Make: Crane / Intervalve / Audco ) on the delivery side.
d) 2 Nos. Slimseal flap type check valve with CI body and cast steel disc pressure rating PN-10 kg/ sq. cm including a set of GI flanges as per BS-10 table1 including bolt nuts , GI washers , and neoprene rubber gaskets complete etc., ( Make: Expert / Intervalve / Audco ) on the delivery side.
e) GI manifold finished neatly with hot dip galvanizing to 100 microns with flanged end on either sides and collar provision for connectivity of above mentioned valves.
These pumps shall be suitable for the following requirements : Flow rate = 2.5 cum/hr., Head 10 meter
-
-
-
... More
Air Diffusion System for EQ, MBBR ( Equalization ) tank & SHT ( Sludge Holding Tank) : Supplying, installing and commisioning of Air Grid of varying sizes as per manufacurers specifications with PVC flexible hose HDPE pipegrid (or) as per OEM manufacturers design to provide clog - free oxygen for Equalisation Tank & Sludge Holding Tank.
1
-
-
... More
Air Blowers: Supplying, installing, testing and commissioning of Twin Lobe design type 02 Nos (1W + 1S) air blower complete with motors, pulleys, Rigid one piece CI casing and side plates, silencer, base plate, anti- friction bearings, Rotary oil sealings having horizontal configuration
-
-
-
... More
a) Twin Lobe root type Air blower of 30 m3/hr at 0.37 kg/sqcm capacity comprising of common base frame, suction silencer, non, return, V belt, safety valve, belt guard, drive and driven pulleys, pressure gauge, inter connection piping, discharge silencer, anti vibration pads including required motor of 1.0 HP, 1500 rpm, IE-2 efficiency with IP-55 protection
1
-
-
... More
b) Cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc ( SG iron), with nitrile rubber seal, tested to 10 kg/sq.cm conforming to BS 5155 /MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets complete etc. ( Make: Crane / Intervalve / Audco / Kitz / Zoloto / equivalent ) on the delivery side.
1
-
-
... More
c) 1 No. pressure gauge 4"dial with valve tee and fittings.
-
-
-
... More
Chlorine Doser: Supplying, installation, testing and commissioning of on line electronic sodium hypo dosing unit with automatically operated dosing pump, etc., The unit shall comprise of the following.
One No. Single moulded FRP cylindrical type chemical solution tank of 100 litres capacity having detachable lids with moulded inserts for mounting of pumps and starter.
One No. Electronic diaphragm type positive displacement pump , for chemical dosing with plastic head. The electronic pump shall be operated on 220V single phase supply and shall be mounted directy on the tank top. ( Make: Milton Roy / Asia LMI ).
-
-
-
... More
The pump shall be suitable for the following requirements: Min. Actuating Pressure - 0.3 kg /sq cm; Max., working pressure - 2.5 kg/sq cm; Max., Temperature - 50 deg C; HP - 1/2 and Dosing flow range - 0 4 LPH
1
-
-
... More
Multigrade Filter: supplying, installation, testing and commissiong of multigrade sand pressure filter for litration of treated sewage water. The filter shall be designed for a specific velocity of 4 m3/hr/sq.m area shall not be less then 16 Inch DIA with Minium HOS 65 Inch.
1
-
-
... More
The filtration unit shall comply with the following technical requirements: Flow rate - 4 cu.m/ hr Backwash duration - once in 24 hours for 20 min. Filtering Media - Multi grade of Sand / Pebbles: Pressure drop across unit -1.0 kg sq.cm (max) and dia of filter - 16 Inch, HOS - 65 Inch.
MOC- FRP, operating pressure: 3.5 kg per sq. cm
Further the filtration unit shall comprise the following:
The filter shall be fitted with inlet distribution and bottom collecting system. Orifice board/ Rotameter for monitoring back wash flow to be fitted. Initial charge of underbed and carbon fotlering media as required. Complete set of valves, perssure gauge with needle valve and frontal pipe work done with Gray PVC pipes.
-
-
-
... More
ACTIVATED CARBON FILTER (ACF): Supply, installation, testing and commissioning of activated carbon filter for filtration and removal of colour in treated sewage water. The filter shall be for 4 m3/hr flow rate and designed to operate for 12 hours.
1
-
-
... More
The ACF shall be designed for a specific velocity of 4 m3/hr/sq.m area and the approx. dia shall not be less than 16 Inch DIA with 65 Inch HOS ( Height on straight ) of vessel.
Further the filtration unit shall comprise the following:
The filter shall be fitted with inlet distribution and bottom collecting system. Orifice board / Rotameter for monitoring back wash flow to be fitted. Initial charge of underbed and carbon filtering media as required. Complete set of valves, pressure gauge with needle valve and frontal pipe work done with Gray PVC pipe.
-
-
-
... More
FilterFeed Pumps : Supply, Installation, testing and commissioning of 2 Nos (1W + 1S) filter feed pumps, each of specifications : Pump Specification : 04 cum / hr; head : 25 meter; 1 HP; 2900 RPM; inlet/ outlet 1.5"/2" (or) as per the OEM standard. ( Make - Jhonson / Kirloskar / KSB )
1
-
-
... More
Plant Piping : Supply, Installation, Testing Commisioning of pipes & Valves with fittings such as tees, crosses, plugs, sockets, elbows, unions, flanges, sleeve pieces, check nuts etc for the entire STP Plant.
1
-
-
... More
a) Providing and fixing of MS pipes to I.S. 1239 including all fittings like bends, flanges, valves, etc., ( Make: Jindal / Tata )
b) Inter connecting pipe works with valves for air line- Jindal/Eqv.
c) Inter connecting pipe works with valves for water line- PVC/UPVC.
-
-
-
... More
Electrical Panel Works:
1
-
-
... More
a) Supplying ,installaing ,testing and commissioning of Electrical panels consisting of MCC panel (motor control center) to accommodate all the drive units with cabling , glanding within the STP Compartmental, design Indoor wall mounted type with top entry for cable the internal components either Siemen / ABB Shall be provided with 1 no. Energy meter.
To receive , control and distribute electrical power at 440 V , 50 Hz , AC in a sheet steel house. MCC is to be manufactured / assembled as per the latest ISI specification, Indian Electricity Rules, Including special requirements of concerned state electricity inspectorate. The switch board shall be fabricated out of 14 SWG sheet steel and shall be un cubical design.MCC of suitable rating to take care of full load of the sewage treatment plant including all motors and lighting. MCC shall be provided with the following feeders.
Incoming Feeder : MCCB, Ernergy meter (Voltmeter with selector switch), LED type indication for 3 phases Outgoing Feeder: MCCB Motor feeder, 1 No 3 phase and netural of suitable capacity to be provided
Busbar: Aluminium
-
-
-
... More
b) Power Cables (LT) for use on 415V system shall be of 1100 volt grade, Aluminium conductor, PVC insulated as per IS: 1554 (Part I). Motor up to 5 HP copper conductor cable should not be less than 1.5 sq mm of size to be used.
c) Control Connector, Lugs / Sockets shall be of copper conductor and of Aluminium for conductor cable, suitable, solderless, crimping type.
d) MCC panel should have necessary features to operate the air blowers according to requirement of DO by means of VFD.
e) Installation and wiring with fixing cable trays.
Shed for all Mechnical Items as per standard.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements