Rural Development Department Tender

2.5 cm thick A.S. flooring in C.C. (1:2:4) using 12 mm size C.B. chips including cost of all materials etc. complete.

Providing and fixing of sliding windows of approved make to be fabricated from roll formed section made of prepainted steel etc complete

Providing and fixing of side hung door of approved make to be febricted from roll formed sections made of prepainted steel ( base steel as per IS - 513 of 6mm thick "D" quality, galvanized as per IS 277 with zinc of 120 gm / sqm) with paint specification being with primer of 5-7 mocrons and finished paint with polyster paint (Black/Pearl white/ Chocolate brown) of 12 - 16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46 x 52mm and shutter being of 46 x 46mm and lock rail and bottom rail should of 23 x 130mm. Accessories / gaskets are to be used as per the manufactures supp;y and specification like handle and lock of approved quality. Hinges made up of 2.50mm thick. Gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The sections are to be cut to length, mitre joined with corner bracket and frame are fixed to concrete / masonary walls by means of self expanding screws and board to be of 9mm pre-laminated with all taxes complete.

Dismentaling and removing 25mm thick Artificial stone flooring including stacking the useful materials for re-use and removing the debris within 50 mt

Removing old Lime or Cement Plaster from walls including racking out joints 12mm deep and removing the debris within 50 mt Lead etc. complete.

16mm thick cement plaster (1:6) finished smooth to inside smooth surface of brick walls after raking out the joints including watering and curing with the cost and conveyance of all materials, Royalty, cess and labour with T&P required for the work as directed by the EIC.

12mm thick cement plaster (1:6) finished smooth to inside smooth surface of brick walls after raking out the joints including watering and curing with the cost and conveyance of all materials, Royalty, cess and labour with T&P required for the work as directed by the EIC.

Supplying fitting, fixing ,vetrified tiles in floors of size 600mm x 600 mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials,Labour T&P etc required for the work .

Fixing Chequred Tiles in floors trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. comp

Distempering two-coats to walls with distemper of approved shade on old work to give an even shade including all cost, conveyance, labour, T&P, Cess etc., required for the work complete including cess as directed by the E.I.C.

Providing two coat weather coat paint over a coat of wall primer including cost of all materials etc. complete.

Painting two-coats with any approved enamel paint over one coat primer including all cost, conveyance,tax, cess of all materials, labour, T&P etc., required for the work as per direction of the Engineer-in-charge.