Rural Development Department Tender

Providing & filling of Bitumen and cement and jute fiber in expansion joints of C.C road at an interval of 5.00 mtr including cost, conveyance, royalty taxes of all materials, bitumen and cement proportion (3:1) including cleaning before pouring 12mm to 25mm and 15 cm depth with cost of all labour and T&P required for the work with cess etc complete as per specification & direction of Engineer-in-charge.

Providing & laying sub base using laterite moorum of approved quality from approved quarry satisfying P.I value not more than 6 & CBR value more than 20 spreading on road surface to required slope & camber including watering & compacting to the required density in OMC with 8T-IOT PRR to the required thicknes including cost, conveyance, royalty T&P taxes of all materials required for the work with hire & running charges of PRR & Cess etc complete as per specification & direction of Engineer-in-charge.

RETAINING WALL

Earth work in excavation in foundation in hard soil including hard moorum, stony earth mixed with boulders (except sheet rock & boulders requiring blasting) with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads & lifts including cost of all labour, cess & T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.

Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, royality, taxes of all materials and cost of all labour & T & P as required for the item of work including cess etc complete as per specification & direction of Engineer-in-charge.

Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance taxes royality, labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge. i) In Foundation

In Substructure

Providing weep holes in abutments and wing walls using 10 CM dia AC pipes including metal spall backing in rear side etc complete including centering and shuttering if required, with cost, conveyance of all materials, labour with T & P, Cess, required for the work and as per direction of EIC.

Supplying and fixing 15cm dia 1.00m long guard post of RCC M20 using 3.5 kg of steel for each guard post with 20mm down graded granite chips including cost of all materials, reinforcement, centering, shuttering and watering etc. complete.

RETAINING WALL

Clearing and grubbing road land including uprooting rank vegetation, grass,bushes,shrubs,saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 mtrs including removal & disposal of top organic soil not exceeding 150 mm in thickness including all labour, T & P, Cess, articles required for the work etc complete and direction of the Engineer-In-Charge.

Earth work in hard soil in road embankment with all leads and lifts including rough dressing and breaking clods to maximum size of 5cm to 7cm and laying in layers not exceeding 0.30 M (1’-0”) in depth with all labour, cess and T&P etc. complete excluding royalty charges required for the work as per direction of Engineer-in-charge. i) Cutting

Providing & laying sub base using laterite moorum of approved quality from approved quarry satisfying P.I value not more than 6 & CBR value more than 20 spreading on road surface to required slope & camber including watering & compacting to the required density in OMC with 8T-IOT PRR to the required thicknes including cost, conveyance, royalty T&P taxes of all materials required for the work with hire & running charges of PRR & Cess etc complete as per specification & direction of Engineer-in-charge.

Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance royalty & taxes of all materials required for the work with cess etc complete in all respect as per specification and direction of the Engineer-in-charge. i) IRC Gr-III Metal

Providing and laying tack coat over the prepared surface of penetration grade of bitumen (80/100) after scrapping clearing the road surface with cost conveyance royality T &P taxes of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including cess as per specification & direction of Engineer-in-charge. i) Over grannular surface 4.00 Kg/10 sqm

Over grannular surface 4.00 Kg/10 sqm

Providing & laying 20mm thick premix carpet using 0.18 Cum of 13.2 mm and 0.09 cum of 11.2 mm size chips for 10sqm on road surface using 14.60 Kg. penetration grade of bitumen (80/100) for 10 Sqm over the prepared surface including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR, bitumen mixtures, tar boilers and all other T&P articles and also including cost conveyance royalties & taxes of chips and bitumen with cost of all labour charges & cess etc complete as per specification and direction of the Engineer-in-Charge.

Providing and laying 6mm thick pre-coated seal coat type ‘B’ using 0.06 cum of 6.7 MM size h.b.g. chips and down graded as per sieve analysis per 10 Sqm and 6.8 Kg of bitumen(80/100) for 10 sqm on the road surface area & rolling with PRR including hire and running charges of PRR and all other machineries, cost, conveyance & royality of maxphalt, 6mm size hard black granite chips with all labour, T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge.

Supplying & installing of mearsurement stones with cement concrete (1:1.5:3) using 12mm size chips including cost convenance,royalites & taxes of all materials including cost reinforcement with Cess etc.complete as per specification of Rural Roads & direction of E-I-C. i) Km stone

200 mtr Stone