Rural Development Department Tender

Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing & laying SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision) and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including deep chiping and slury treatement including all cost of Labour, Materials and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Priming one coat with any approved primer including cost of material & labour, Cost of all T&P Required for the work all royality Charges and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Finishing Wall surface with Cement based wall putty including all cost of Labour, Materials, T&P required for the work, all royality charges etc complete.and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Painting 2 coats with any approved enamel paint on new/old wood work including cost of paint & labour all materials , Cst of all royality charges, T&P required for the work and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Construction of RCC guide posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause.and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Construction of embankment with approaved materials obtained from borrow pits with a lift upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification clause 301.5 and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing rough stone dry packing in approns and revetments with 15 to 30cm hard granaite stone including cost conveyance of all materials to site etc. with all labour, materials, T&P, royalty, taxes and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 -2012 made of class-B retro-reflective sheeting of high intensity grade and high intensity Prisimatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly confirming to clause 6.7 of IRC 67-2012 and vide Clause 801.3, fixed over aluminium sheeting, 2.00 mm thick or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides supported on mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3nos horizontal and 1no vertical extra supporting member of extra supporting member of angle size 50x50x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x75 cm, 60 cm belowground level as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T & P, excavation, curing etc. complete, under supervision of Engineer-in-Charge. (For 1200x900)mm and 1% CESS etc. complete as per specification and direction of the Engineer-in-Charge