Rural Development Department Tender

C.C. (1:4:8) using 40 mm size H.G. metal ( H.B. ) of approved quality with all cost, carriage, T&P, royalty etc of all materials complete and as directed by E.I.C.

Fly ash brick masonry using fly ash bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in foundation including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash. Bricks masonarry in superstructor in C.M. (1:6) using bricks of approved quality etc with all cost carrage T & P etc complet as per direction of the Engineer-in-charge A)Foundation

B)Superstructure

Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

a) Column Base

b) Grade Beam

c) Column

d) Beam

e) Chajja

f) Lintel

g) Roof slab

Supplying, fitting and placing uncoated HYSD bar reinforcement Labour for cutting, bending, binding M.S. bar/tor steel straightning taying the grill in position etc. with all cost, carriage of steel. etc. complete as per direction of the Engineer-in-charge

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor etc complete as per the direction of E.I.C.

16mm thick C.P. (1:6) over Brick masonry etc. with all cost,carriage,T&P of all materials etc complete as per the direction of E.I.C.

12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.

Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

Supplying,fitting & fixing vetrified tile in dadoos of size 600mm x 600mm of approved make conforming to IS:13755 laid on 20 mm thick cement mortar 91:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials labour T &P etc & Cess required for the work all complete as per direction of Engineer-In-Charge.

M. S Pannelled Door Single leaved shutter with M.S frame Over alll size frame- 1830mm (H) x 910 mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame -30x30x5mm M.S angle, shutter style- Top & Bottom rail 25x25x3mm MS angle, Door pannel-1.0mm C.R , sheet. pannel stiffener covering width of each leaf- 19x5mm, MS Flats 3nos on each leaf. Hinges size 100mm 3no bought out as per ISS. Hold fast- 35x35x6mm MS Angle 150mm length bifuricated- 3nos. on each side Handle- 19x5mm M.S Flat, Fabricated-2nos, Aldrop-2nos. bought out as per Approximate weight-36.5kg

M. S Pannelled Window double leaved shutter with M.S frame &Grill Over alll size frame- 1220mm (H) x 910 mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame -35x35x6mm M.S angle, shutter style- Top & Bottom rail 25x25x3mm MS angle, window pannel-1.0mm C.R , sheet. pannel stiffener covering width of each leaf- 19x5mm, MS Flats 2nos on each leaf. Hinges size 100mm 4nos (2no each sides) bought out as per ISS. Hold fast- 35x35x6mm MS Angle 100mm length bifuricated- 2nos.one in each side. Handle-19x5mm MS Flat 2nos Fabricated(inside) Towel bolt - 4nos bought out as per ISS, Horizontal Grills- 12mm MS round at 100mm spacing Approximate weight-39kg

Labour for Fitting and fixing MS grills including cost conveyance taxes etc. complete as per direction of the Engineer-in-charge

Painting two coats over a coat of priming with approved paint incld cost of paint on new Iron work with all cost of paint & primer etc. complete as directed by the E.I.C.

Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance royalities and taxes of all materials and labour with T&P required for the work with cess etc, complete in all respect as per direction of Engineer-in-charge.

Finishing walls with weather shield cement paint of approved shades in two coats on new work finishing smooth including cost of all material and labour etc. complete as per direction of the Engineer-in-charge a) Cost of AL Frame

Providing cc (1:2:4) using 12 mm chips with cost conveyance of all materials etc. complete as per direction of the Engineer-in-charge

Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall in Ground Floor etc. complete as per direction of the Engineer-in-charge

M. S Pannelled Door double leaved shutter with M.S frame Over alll size frame- 1980mm (H) x 1070 mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame -35x35x6mm M.S angle, shutter style- Top & Bottom rail 25x25x3mm MS angle, Door pannel-1.0mm C.R , sheet. pannel stiffener covering width of each leaf- 19x5mm, MS Flats 3nos on each leaf. Hinges size 100mm 6nos (3no each sides) bought out as per ISS. Hold fast- 35x35x6mm MS Angle 175mm length bifuricated- 4nos. Aldrop- 2nos bought out as per ISS, Approximate weight-54kg etc required for the work all complete as per direction of the Engineer-in-charge

Labour for fitting and fixing of M.S. Gates as per approved design including cost of all materials etc, complete as per specification & direction of E.I.C.