Rural Development Department Tender

a) Over Bituminous surface.

Providing and laying 20mm thick Open Graded Premix Carpet using 13.2mm to 5.6mm size C.B.H.G. stone aggregates using mini Hot mix Plant over prepared surface using a total quantity of 14.6 kgs of 80/100 or 60/70 grade Bitumen per 10.0Sqm and compacting with 8 -10T power road roller including hire & running charges of PRR, T&P, cost conveyance royality & taxes of all materials,labour charges for cleaning the surface spreading laying and cambering premix carpet for finished item of work etc.complete as per the specification and direction of the Engineer-in-Charge. (Over granular surface / BT surface)

Providing & laying 6mm thick pre-coated seal coat type-B using 0.06cum of 6.7mm size C.B.H.G.chips as per sieve analysis & 6.8kg of 80/100 or 60/70 grade bitumen per 10sqm including hire and running charges of PRR, Hot mix plant, tar boiler & all other T&P articles including cost, conveyance, royalty, taxes of all materials etc. complete as per specification and direction of the Engineer-in-Charge.

Labour for spreading graded stone dust in sub-base and consolidation with rammer including watering including cost and conveyance of materials with all labour T&P etc. complete as per specification & direction of the Engineer-in-Charge

Providing 75mm. compacted thickness of WBM metalling with following size of metal including quarrying, collecting, conveying & stacking at work site or at approved stacking yard beyond the trafficable berm of approved quality from approved quarry including cost, conveyance, royalty & taxes of all materials cost of T&P articles required for the work, labour charges for conveying from stacks & spreading & laying metal of all sizes in layers to proper camber & grade including hand packing & compacting with PRR, Labour charges for conveying moorum from stacks, filling the interstics spreading the same over the metalled surface in required quantities, watering, including carriage of water for consolidating with PRR including hire & running charges of PRR & all other machineries etc. complete as per specification & direction of the Engineer-in-Charge (measurement will not be taken for quantity of filler materials)

b) WBM Grade - II

Providing cement concrete (1:1.5:3) with 12mm size of c.b.h.g chips of approved quality from approved quarry for cement concrete road including hoisting, lowering and laying in position in layers not exceeding 15cm thick over polythene sheet with proper packing and ramming by means of vibrator to proper slope and level including curing with cost conveyance, royality and taxes of all materials, labour with T&P required for the work etc. complete as per specification direction of the Engineer-in-charge.

Filling bitumen and cement and jute fibre in expansion joints inclusive of materials bitumen and cement propersion (3:1) including cleaning before pouring 12mm to 25mm and 15cm depth etc. complete as per specification & direction of the Engineer-in-Charge

Construction of embankment with hard soil obtained from borrow pits with 5 extra lead and initial lift including spreading grading and compacting by PRR to meet the requirement etc complete as directed by the Engineer-in-Charge.