Rural Development Department Tender

Fly Ash Brick masonary brick size of 25x12x8cm having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M. 1:6 in foundation and plinth including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

Fly Ash Brick masonary brick size of 25x12x8 c.m having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M.1:6 in Superstructure including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

RCC work of M-20 grade Foundation having a minimum compreshive srength 150kg per cm2 in 150mm cubes at 28 days curing after mixing and test conducted in accordance with I.S 456 and I.S 516 using black hard crusher broken granaite chipsof 20mm and down-grade size not exceeding 25percent of approved quality including hoisting and laying placing in position concrete watering and curing for 28 days including cost of rigid and smooth stool centering and shuttering with C.M plaster 1:2 at no extra cost where necessery and cost, conveyance, royality and taxes of all materials labour required for the work etc. complete but excluding cost of M.S. Rod or Tor steel and binding and tying the grills and placing in position etc.complete. The materials used in the work and finished item of work shall confirm to relevant I.S specification and as per specification and direction of the Engineer-In-charge. The testing charges will be borne by the contractor

Grade beam

Column

Single Under ream 250mm Dia 2.5 mtr long Pile foundation with RCC-M20 using 12mm size black hard granite chips including cost of boring but excluding cost of MS or Tor steel and labour charges for cutting , bending and binding of steel etc. complete as per specification and direction of the Engineer-In-charge.

Providing HYSD bar reinforcement Fe 415 MS round bars required for R.C.C. works including cost and conveyance of tested M.S. or T.S. rods and binding wire of 18 to20 gauge, including labour charges for straightening , cutting,bending,binding,and welding if required and tying the grills and placing in proper position as required incase of availability of rods in Departmental store,the same can be supplied to the contractor at prevailing stock issue rate of grade S 240 and S 415 confirming to IS 432 and IS 1786 respectively with approved design etc complete as per Specification and direction of Engineer-In - charge.

12mm thick cement plaster 1:6 finished smooth to outside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

16mm thick cement plaster 1:6 finished smooth to inside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

Finishing walls with Acrylic wall putty (Water based) of approved quality and Making smooth to receive painting including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Priming 1-coat with any approved primer including all labour etc complete as per direction of the Engineer-in-charge.

Finishing walls with weather coat two coats over a coat of cement primer to outer wall surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

First floor

Dismantling brickwork, stone masonry in Cement mortar under 3meter height including stacking the useful material for reuse and removing the debris within 50 meter lead.as per specification and direction of the Engineer-In-charge. .

Earthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods by mechanical means to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of Engineer-in-charge.