Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 16,74,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_108229_2Bid Award Id
ViewTender No
C.E. (B) - 23 / 2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
BUILDING PROPER
2427.98
-
-
... More
BOUNDARY WALL
2099.8
-
-
... More
CC Road
123.6
-
-
... More
RCC Drain
64.27
-
-
... More
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
-
-
-
... More
BUILDING PROPER
809.33
-
-
... More
BOUNDARY WALL
699.94
-
-
... More
CC Road
111.24
-
-
... More
RCC Drain
57.84
-
-
... More
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
BUILDING PROPER
2615.75
-
-
... More
BOUNDARY WALL
142.98
-
-
... More
RCC Drain
10.71
-
-
... More
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
-
-
-
... More
BUILDING PROPER
1467.41
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
-
-
-
... More
BUILDING PROPER
93.71
-
-
... More
BOUNDARY WALL
96.36
-
-
... More
Providing and lying plain Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
-
-
-
... More
RCC Drain
10.71
-
-
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
Footing
425.72
-
-
... More
Column up to Pl Lvl
38.98
-
-
... More
Tie/Plinth Beam
66.16
-
-
... More
Column up to Roof Lvl
-
-
-
... More
Ground Floor
60.85
-
-
... More
First Floor
59.09
-
-
... More
Second floor
56.74
-
-
... More
Mumty floor
5.49
-
-
... More
LINTEL
-
-
-
... More
Ground Floor
6.47
-
-
... More
First Floor
8.77
-
-
... More
Second Floor
6.4
-
-
... More
Mumty floor
0.38
-
-
... More
CHAJJA
-
-
-
... More
Ground Floor
5.6
-
-
... More
First Floor
26.96
-
-
... More
Second Floor
21.02
-
-
... More
Mumty floor
1.89
-
-
... More
ROOF BEAM
-
-
-
... More
Ground Floor
174.24
-
-
... More
First Floor
99.72
-
-
... More
Second Floor
100.83
-
-
... More
Mumty floor
13.93
-
-
... More
ROOF SLAB
-
-
-
... More
Ground Floor
220.11
-
-
... More
First Floor
209.49
-
-
... More
Second Floor
150.27
-
-
... More
Mumty floor
23.03
-
-
... More
STAIRCASE
-
-
-
... More
Ground Floor
58.49
-
-
... More
First Floor
35.48
-
-
... More
Second Floor
36.31
-
-
... More
LIFT WALL
-
-
-
... More
Ground Floor
21.04
-
-
... More
First Floor
14.23
-
-
... More
Second Floor
16.63
-
-
... More
Mumty floor
17.82
-
-
... More
R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
... More
BOUNDARY WALL
-
-
-
... More
Retaining wall base footing
536.65
-
-
... More
Retaining wall
771.71
-
-
... More
Plinth Beam
3.12
-
-
... More
Column
9.36
-
-
... More
Top Beam (Coping)
1.4
-
-
... More
Lintel
0.06
-
-
... More
Chajja
1.53
-
-
... More
Roof Beam
20.07
-
-
... More
Roof slab
7.29
-
-
... More
CC Road
-
-
-
... More
Kerb Stone
1098.67
-
-
... More
RCC Drain
-
-
-
... More
Base
10.71
-
-
... More
Wall
22.25
-
-
... More
Slab
10.71
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding, wastage & over lapping and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
1438.01
-
-
... More
First Floor
696.51
-
-
... More
Second Floor
622.98
-
-
... More
Mumty floor
90.25
-
-
... More
BOUNDARY WALL
960.65
-
-
... More
RCC Drain
28.39
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
BUILDING PROPER
241.68
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
330.88
-
-
... More
First Floor
393.66
-
-
... More
Second floor
345.59
-
-
... More
Mumty floor
95.53
-
-
... More
BOUNDARY WALL
52.81
-
-
... More
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
26.56
-
-
... More
First Floor
77.53
-
-
... More
Second floor
13.73
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1967.38
-
-
... More
First Floor
2464.46
-
-
... More
Second Floor
1834.2
-
-
... More
Mumty floor
435.06
-
-
... More
BOUNDARY WALL
144
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1967.38
-
-
... More
First Floor
2464.46
-
-
... More
Second Floor
1834.2
-
-
... More
Mumty floor
435.06
-
-
... More
BOUNDARY WALL
2766.01
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1504.72
-
-
... More
First Floor
1431.3
-
-
... More
Second Floor
1029.1
-
-
... More
Mumty floor
155.44
-
-
... More
BOUNDARY WALL
50.14
-
-
... More
Supplying, fitting and fixing Mat Full body vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS of size 600mm x 600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
529.92
-
-
... More
First Floor
531.32
-
-
... More
Second Floor
215.43
-
-
... More
Providing, fitting, fixing 1200 mm high and 150mm in polished glazed vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS of size 600mm x 600mm Plain (Ivory) of approved make (JOHNSON /SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
479.66
-
-
... More
First Floor
524.82
-
-
... More
Second Floor
330.66
-
-
... More
Supplying, fitting and fixing High Abrasion resistant Industrial Mat vetrified tiles of premium grade having thickness 10mm confirming to IS of size 1200mm x 600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
303.09
-
-
... More
First Floor
345.01
-
-
... More
Second Floor
177.58
-
-
... More
Providing and Fixing 20mm thick mirror polished granite stone slab of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 25 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
162.31
-
-
... More
First Floor
130.31
-
-
... More
Second Floor
137.69
-
-
... More
Supplying, Fitting & Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
16.65
-
-
... More
First Floor
16.65
-
-
... More
Second Floor
16.65
-
-
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON /RAK / SOMANY/ KAJARIA or equivalent ) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge
-
-
-
... More
Ground Floor
310.85
-
-
... More
First Floor
310.85
-
-
... More
Second Floor
310.85
-
-
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per direction of the Engineer-in-charge.
-
-
-
... More
BUILDING PROPER
1307
-
-
... More
CC Road
741.6
-
-
... More
OT flooring - Supply, Installation, Testing of 2mm electrostatic dissipative flooring of robust E17 as per selected shade . Dissipative homogeneous PVC floor covering in rolls or tiles with permanent antistatic properties lessthan 2kv. The value of electrical resistance is in the range of 106 to 108 of standards EN1081 static electrical propensity less than 2 and as per standards EN1815 absrasion value according to En 660 2 less than or equal to4.0mm group M fire class BFls1 load class 34/43 after 28 days the TVOC 10 ug/m3 according ISO 16000-6 reach compliant ISO717-2 weightened improvement of impact sound inslation is 4db price includes supply, welding rod, 30mm coving, iinstalation & transportation.
-
-
-
... More
Second Floor
71.85
-
-
... More
Sterile area flooring - Supply, Installation, Testing of 2mm electrostatic dissipative flooring of robust E17 as per selected shade . Dissipative homogeneous PVC floor covering in rolls or tiles with permanent antistatic properties lessthan 2kv. The value of electrical resistance is in the range of 106 to 108 of standards EN1081 static electrical propensity less than 2 and as per standards EN1815 absrasion value according to En 660 2 less than or equal to4.0mm group M fire class BFls1 load class 34/43 after 28 days the TVOC 10 ug/m3 according ISO 16000-6 reach compliant ISO717-2 weightened improvement of impact sound inslation is 4db price includes supply, welding rod, 30mm coving, iinstalation & transportation
-
-
-
... More
First Floor
255.73
-
-
... More
Second Floor
167.17
-
-
... More
OT wall cladding - Supply, Installation, Testing of 2mm electrostatic dissipative flooring of robust E17 as per selected shade . Dissipative homogeneous PVC floor covering in rolls or tiles with permanent antistatic properties lessthan 2kv. The value of electrical resistance is in the range of 106 to 108 of standards EN1081 static electrical propensity less than 2 and as per standards EN1815 absrasion value according to En 660 2 less than or equal to4.0mm group M fire class BFls1 load class 34/43 after 28 days the TVOC 10 ug/m3 according ISO 16000-6 reach compliant ISO717-2 weightened improvement of impact sound inslation is 4db price includes supply, welding rod, 30mm coving, iinstalation & transportation.
-
-
-
... More
Second Floor
195.62
-
-
... More
Supplying and fixing of Powder coated 50-60 microns approved colour of Jindal aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass. the rate quoted inclusive of hardwares like antilift, roller, Espag lock cum handle, epdm gaskets, T mullion, Fly Mullion, bottom adopter, mid transom, glazing clip for 12 mm glass felt along with all accessories etc complete. The gap between the wall and window will be filled with silicon weather sealant in the outer side. including the cost of all materials , hardware fittings,cost of all labour, conveyance, loading, un loading, T&P, etc, complete as per the direction of Engineer-in Charge.
-
-
-
... More
Ground Floor
18.9
-
-
... More
Supplying and fixing of Powder coated 50-60 microns approved colour of Jindal aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 50% 6mm clear Toughen glass & 50% 4mm ACP Sheet in bottom. The quoted rate inclusive of hardwares like antilift,roller, Espag lock cum handle,epdm gaskets,glazing clip for 12 mm glass felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealant in the outer side. Casement Door Outer frame - 40mm x 45.3mm Series x 1.4mm thickness Fly mullion - 44 x 60 mm x 1.4mm thickness T Mullion 40 x 78.4mm x 1.4mm thickness Transom - 40.28 x 125.8 x 1.75 mm thickness Bottom adopter - 34.6 x 26 x 1.5mm thickness including the cost of all materials ,hardware fittings,cost of all labour, conveyance, loading, un loading, T&P, etc, complete as per the direction of Engineer-in Charge.
-
-
-
... More
Ground Floor
9.45
-
-
... More
First Floor
51.98
-
-
... More
Second Floor
33.08
-
-
... More
Providing and fixing of WPC door frames (125x62.5mm), 32mm thick flush door,vision panel,1mm thick lamination (Light Grey colour) at both sides, Make : (WPC door frame:Rajashri plastiwood , Alstone , Armstrong . Flush doors: Century Architect/Green Club/Sylvan . Lamination : Merino / Aerolam / Royal touch . Hardwares : Godrej / Dorma /EBCO / Dorset / Hettich.) including cost of all materials, cost of all labour conveyance, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
134.8
-
-
... More
First Floor
100.3
-
-
... More
Second Floor
61.05
-
-
... More
Mumty floor
13.2
-
-
... More
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground Floor
60.3
-
-
... More
First Floor
43.43
-
-
... More
Second Floor
25.99
-
-
... More
Mumty floor
9.45
-
-
... More
Providing and fixing of Ot door frames must be formed of 1.2 mm thick stainless steel (SS) Grade 304 No.4 finish sheet with a single rebate profile of 100x62mm. Frame must be mitered or butt fastened ,and field assemble using self - tabs or nuts and bolts. To receive the proper hard ware , every provision should be mortised, drilled ,and tapped .back plate bractets and anchor fasteners should be included with frames for installation on a finished plastered masonary wall opening with door leaf of 46 mm thick double skin door id designed to fit flush in to the wall panel system and is supplied in different dimensions. Doors are fabricated from 0.8mm stainless steel (SS) grade 304 no.4 finish sheets. the GI sheets are resin bonded with honeycomb core as an infill material . the doors are factory CNC fabricated with all necessary provisions for receiving hard wear such as hinges, locks and door closers.
-
-
-
... More
Double glazed view panel of 5mm glass shall be provided as per requirement. for double leaf doors integrated astragals must be provied on the meeting stile for both the active and inactive leaf . optional hardwear such as single / double point panic bars can be provided as per client requirement . optional infill of rockwool can be provided for better insulation as per client requirement , door s can also be internally lined with 2mm lead sheet to prevent from radiations as an option . DOOR HARDWEAR :- SS 304 Ball bearing butt hinges , door closer , mortise locks, SS 304 D ' Handle on both side , single / double point panic bar with external trim , automatic drop bottom seal , vision panel ( Double Glazed ) , including cost of all materials , all labour , sundries ,T&P etc .Complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Second Floor
7.56
-
-
... More
OT ceiling - Supply and installation of stainless steel ceilings are the safest when it comes to sanitizing and disinfecting. So easy to wash and wipe often and the results visible to all from housekeeping to auditors to patients and doctors alike. Well, Serge Astral SS does duty in this ICU. Clip-in tiles , Sj having 600x600x0.6mm having weight 2kg/m2, square edge, bulkheads made up of SS Material sheets installed in ceiling using Spring -T system . Spring -T system of 600x600mm module includes Skelet WA15W30, sectional thickness 0.4mm , with unequal flanges of 15/19mm, length 3000mm,fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm center center .Then hold -on ceiling clamp hung from the soffit at 600mm centers bothways with Hanger rod and soffit cleat . Strut Spring -T is then held in possition by hold -on clamp @ every 600x600x0.6mm are then clipped into spring -T . Technical parameters . Fire(Class)-A . Acoustics -nil (For E 300 Mounting ). Thermal conductivity (W/mk)-na. Climate (C,RH)-50, 99.Light reflectance (%)-75 .Green (VOC,RC%) - Low ,25,Finish -Matt has anti bacterial H+V++, Including cost of all meterials , all labour , sundries , T&P etc. Complete in all respect as per direction of Engineer-in- Charge.
-
-
-
... More
Second floor
71.85
-
-
... More
Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) and pporoved make (FENESTA/NCL VEKA LTD./ Koemmerling/ DURAPLAST) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - saint gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge.
-
-
-
... More
Ground floor
79.44
-
-
... More
First floor
63.09
-
-
... More
Second floor
46.53
-
-
... More
Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) pporoved make (FENESTA/NCL VEKA LTD./ Koemmerling/ DURAPLAST) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - saint gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge.
-
-
-
... More
Ground floor
5.4
-
-
... More
First floor
5.4
-
-
... More
Second floor
5.4
-
-
... More
Mumty floor
5.4
-
-
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD./ Koemmerling/ DURAPLAST). Ventilator/ Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM, weathering seal resistant accessories, like clipping Jocking system tone including cost and conveyance of all materials, accessories, labour charges, materials Nuotiosoite pine thermobninstalled at the nonaktsmeners, silicon rubber sealant, easy glazing/deglazing at site etc.
-
-
-
... More
Ground floor
10.44
-
-
... More
First floor
8.28
-
-
... More
Second floor
1.8
-
-
... More
Xray door - Supply and installation of lead line door . Door leaves Constructed from 1.20mm Thick Galvanized steel Sheet fromed to provide a 46 mm thick fully flush , double skin door , shell with lock seam joints at stiles edges. In-fill of PUF including 2.0 mm lead sheet ( Poly Urethanes from ) is used to give the required rigidity and effective acoustic and thermal insulation .Door frame produced from 1.6 mm thick galvanized steel sheet formed to double or single rebate profile of size 143x57.105mmx60mm. & 100x57mm and we are insert 2mm lead sheet in the door frame . The door frames maybe built into the brick or block walls using xorrugated "T" anchors not welded to the frames ( First Fix). Frames may also be fixed on plastered openings with the help of anchor Fasteners ( Second Fix ). Door Framesare supplied to knockdown from with butt joints for bolted assembly at site . including cost of all materials. all labour , sundries , T&P etc . Complete in all respect as per direction of engineer -in-charge.
-
-
-
... More
Ground floor
5.74
-
-
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Ground Floor
2572.56
-
-
... More
First Floor
2072.79
-
-
... More
Second Floor
1625.67
-
-
... More
Mumty floor
145.8
-
-
... More
BOUNDARY WALL
64.4
-
-
... More
Supplying, fitting & fixing M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
BOUNDARY WALL
1116
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
Ground Floor
5439.48
-
-
... More
First Floor
6360.22
-
-
... More
Second Floor
4697.5
-
-
... More
Mumty floor
1282.82
-
-
... More
BOUNDARY WALL
162.4
-
-
... More
Wall painting two coats with Antifungal Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
Ground Floor
1020.46
-
-
... More
First Floor
751.18
-
-
... More
Second Floor
1010.26
-
-
... More
Mumty floor
416.48
-
-
... More
BOUNDARY WALL
162.4
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
3972.07
-
-
... More
First Floor
5643.74
-
-
... More
Second Floor
3714.51
-
-
... More
Mumty floor
870.12
-
-
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-charge)
-
-
-
... More
Ground Floor
3972.07
-
-
... More
First Floor
5643.74
-
-
... More
Second Floor
3714.51
-
-
... More
Mumty floor
870.12
-
-
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make-Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-charge).
-
-
-
... More
Ground Floor
95.28
-
-
... More
First Floor
76.77
-
-
... More
Second Floor
60.21
-
-
... More
Mumty floor
5.4
-
-
... More
BOUNDARY WALL
22.32
-
-
... More
CC Road
98.88
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. (Make-JINDAL )
-
-
-
... More
Ground Floor
653.75
-
-
... More
First Floor
653.75
-
-
... More
Second Floor
580.43
-
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
First Floor
71.03
-
-
... More
Second floor
36.58
-
-
... More
Terraace Floor
834.12
-
-
... More
Water proofing application - Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 - 2.5mm. The membrance should have elongation equal or more than 30% crack bridging ability up to 1mm, Adhesive strength 1.0N/mm2 @ 28d, Tensile elongation : 60% @ 20C, Shore a hardness 85 (between 3-7 days) etc, as per direction of E.I.C ( for longer span, in terrace panel of 4m x 4m should be done by groove cutting and filling with PU sealant).
-
-
-
... More
First Floor
71.03
-
-
... More
Second floor
363.45
-
-
... More
Terraace Floor
834.12
-
-
... More
Supply and installing of Expobond one flexible polyolefin (FPO) membrane system which is designed to be bonded over expansion and movement joints up to 150mm in structures to prevent the passage of water having elongation at break: 400% , tensile strength : 12.5N/mm2 (DIN EN 12311-2 method B), water vapour permability: 2.7g/Sqm/day (DIN EN 1931- Method B). It is bonded in posiition using two part epoxy adhesive, Nitrobond PC40 as per manufacturer direction after proper fixing of the necessary backup materials as specified and directed by the Eingineer in charge. The item rate shall be including of all kinds of labour, tools, & tackel, machineries, lead & lift, mathadi charges, curing, wastage, consumable, cleaning, shifting of debries outside the site premises, surface preparation etc. complete as per design, drawings & instructions of EIC.
-
-
-
... More
Ground floor
22.73
-
-
... More
First floor
22.73
-
-
... More
Second floor
22.73
-
-
... More
TErrace floor
15
-
-
... More
Providing Weep Holes as per approved Drawing & Technical Specifications and as per Section 2700 of MoRT&H Specifications for Road & Bridge works (Latest Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge.
-
-
-
... More
BOUNDARY WALL
377.7
-
-
... More
Earth work in excavation soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the emb. within 1000 mtr. complete in all respect as directed by the Engineer in charge. (Slope cutting & Benching)
-
-
-
... More
SITE CLEARANCE
20979.6
-
-
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600.1, cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver and compacting with vibratory roller, finishing and curing as per Clause 601 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
CC Road
82.4
-
-
... More
E.I. WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/ Norpak/ Anchor/ Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
330
-
-
... More
GROUP-B
300
-
-
... More
GROUP-C
200
-
-
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
96
-
-
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
90
-
-
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
90
-
-
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
30
-
-
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius-NEXT GEN)) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
12
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
1622
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
3255
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
1700
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
255
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
1700
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
1244
-
-
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
48
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
8
-
-
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
24
-
-
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision)
158
-
-
... More
Sub-Head II (Light fitting Fixture & Fan)
-
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
28
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
22
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
158
-
-
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (2 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 2 years.
50
-
-
... More
Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, Top opening clean room LED luminaire of 600 X 600 x 65 mm size with of 45 W and system lumens output not less than 4500 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2years. .Each CLEAN ROOM FITTING .
14
-
-
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
380
-
-
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
110
-
-
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
40
-
-
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
222
-
-
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
12
-
-
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
14
-
-
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years
8
-
-
... More
8 Way(8+24) Way TPN MCB DD DB Horizontal Type suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)Warranty on DB is 3 years
12
-
-
... More
Supplying and fixing 20 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
4
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
400
-
-
... More
Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
12
-
-
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
12
-
-
... More
Supplying and fixing 25Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
6
-
-
... More
Supplying and fixing 40Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
12
-
-
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity ,DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCB should be Replacement Warranty will be 3 years.
8
-
-
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
12
-
-
... More
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
12
-
-
... More
(Earthing) INSTALLATION
-
-
-
... More
Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
12
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
533
-
-
... More
Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
111
-
-
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/ Polycab/ HAVELLS/ RR KABLE/ Gloster of following size cables as per direction of Engg.-in-Charge.
-
-
-
... More
3.5core x 240 sq mm (2 run from TRF to Main LT Panel)
222
-
-
... More
3.5core x 120 sq mm ( DG PANEL 2 RUNS )
144
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/ Polycab/ HAVELLS/ RR KABLE/ Gloster of following size cables as per direction of Engg.-in-Charge.
-
-
-
... More
3.5core x 95 sq mm ( FOR FDB 1F,2F, POWER )
33
-
-
... More
4core x 16 sq mm (BDB LIGHT /POWER,EQUIPEMENT )
25
-
-
... More
4 core x 6 sq mm (for small power)
33
-
-
... More
3.5core x 35 sq mm (To FDB LIGHT / power BDB/UPS PANEL,separate panel for OT Complex,MCU)
25
-
-
... More
3.5core x 50 sq mm (From main panel to light floor distribution panel)
33
-
-
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
17
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
156
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
144
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
22
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
18
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
66
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
42
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
18
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
20
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x240 sq mm
4
-
-
... More
4 core x16sq mm
6
-
-
... More
3.5 core x35 sq mm
6
-
-
... More
3.5 core x95 sq mm
4
-
-
... More
3.5 core x120 sq mm
4
-
-
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
12
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
200 mm dia
32
-
-
... More
PANELS
-
-
-
... More
MAIN CONTROL PANEL AT GF
-
-
-
... More
S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.80X10MM Separate Aluminium Earth bus bar should be installed.
In commer-1-01 number of 630A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release Electrical locking for normal & DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM 250 KVA TRANSFORMER).
In commer-2-01 number of 400A(320-400) 4P Icu=100%Ics,36kA LSIG MCCB with micro processor based release Electrical locking for normal & DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) (DG 160 KVA INCOMMER).
In commer-2- 01 no of 400A 4P onload changeover switch (160 KVA DG 01 NO)(Make-C&S/LK(L&T)/Siemens/Schneider).
Busbar-1&2 04 numbers of 800Amps copper busbar with 1.6A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing).
Out going- 08 numbers of 100A 4P MCCB,,25Ka MCCB withTMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
1
-
-
... More
Out going- 02 numbers of 125A 4P MCCB,,25Ka MCCB withTMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
Out going- 4 numbers of 160A 4P Icu=100%Ics,,25Ka MCCB withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
Out going- 6 numbers of 32A rating,10 KA breaking capacity,C series, 4P MCB(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Out going- 6 numbers of 63A rating,10 KA breaking capacity,C series, 4P MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Out going- 1 number of 320A 4P Icu=100%Ics,,25Ka MCCB withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
Out going- 1 number of 250A 4P Icu=100%Ics, ,25Ka MCCB withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.
1 no. 3P+N 40kA/POLE type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(TYPE-I)(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) .
-
-
-
... More
FDB LIGHT AT 2F,1F
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 01 no 100A 4P MCCB 16kA, MCCB withTMR based release with adjustable overloadwith on/off trip indication Light load for each floor. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS).
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
Out going- 06 nos 40-63A 4P MCB 10kA,C series Light load to LDBs . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make & model).
2
-
-
... More
FDB RAW POWER AT 1F,2F ALONG WITH DOCTORS ROOM WITH DG SUPPLY
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER/AC)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. Type 2 SPD 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer - 01 no 125A 4P MCCB 25kA, with ROM & S. Link. Icu=100%Ics,,25Ka MCCB withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) (Icu=100%Ics)with shunt trip.
Busbar- 04 numbers of 250Amps, Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 63A 4P RCBO 300mA FOR VRF Outdoor units. Make-LEGRAND-dx3 / Siemens-Betaguard/ Schneider- Acti 9 .
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
2
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER/AC)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. Type 2 SPD 3P+N 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer - 01 no 125A 4P MCCB 25kA, with ROM & S. Link. withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) (Icu=100%Ics)with shunt trip.
Busbar- 04 numbers of 250Amps, Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
Out going- 06 nos 63A 4P MCB 10kA,C series for power BDB. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
2
-
-
... More
UPS PANEL FOR OT, ICU & OTHER EMERGENCY (COMMON & CRITICAL) (FOR EACH FLOOR)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 01 numbers of 63 Amps 4P MCCB. Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 (Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
Busbar- 04 numbers of 100Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 32A rating,10KA breaking capacity,C series, 2P MCB UPS Light load for each floor.Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9.
Out going- 03 nos 32A rating,10KA breaking capacity,C series, 4P MCB OT/ICU POWER/OT MACHINE OR Bed head panel.Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter Digital type & CTS.(DIGITAL).
(iii) 01 set of 0-500 voltmeter Digital type.(DIGITAL).
NB- This panel should have proper earth by suitable rated copper flat.
3
-
-
... More
UPS SYSTEM(For OT, & COMMON AREA)
-
-
-
... More
Supply ,installation ,testing & commissioning of 20KVA Parallel UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sicuency corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 65AH, 32 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/ APC/ Vertiv) LOAD OF OT, ICU) as per direction of Engg.-in-Charge. Warrentee period of all accessories & component & system must be 2 years & compelete test certificate must be submitted along with ups including component list & SLD.
2
-
-
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
-
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
66
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
66
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
49
-
-
... More
Supplying,fixing of FLOOR RACE WAY WITH JUNCTION box GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions of size 38mm(H) x 225mm(W), of MAKE- Profab/OBO/Neidax .(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT.
66
-
-
... More
Subhead- 1 (Lan System)
-
-
-
... More
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Systimax/Panduit
2344
-
-
... More
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box Make: Legrand/Systimax/Panduit
48
-
-
... More
Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make: Legrand/Systimax/Panduit
7
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord,1mtr, Make: Legrand/Systimax/Panduit
100
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord, 2mtr. Make: Legrand/Systimax/Panduit
12
-
-
... More
Supply & Installation of 6F Single Mode Armoured FO Cable through existing conduit. Make: Legrand/Systimax/Panduit
244
-
-
... More
Supply and Installation of 6 Port Rack Mount Draw Type LIU loaded with SM SC Adaptors and Pigtails including core splicing and connnectrisation. Make: Legrand/ Systimax /Panduit
7
-
-
... More
Supply & Installation of Single Mode SC-LC Type OFC Patch Cord, 2mtr length. Make: Legrand/Systimax/Panduit
9
-
-
... More
Supply & Installation of 1000Base LX Fiber Transceiver. Make: Cisco/Digisol/HP
9
-
-
... More
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 270 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Cisco/HP
7
-
-
... More
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable manager and H/W Pkt. Make : Netrack/Valrack/Rittal/APW
6
-
-
... More
Supply & fixing of 24U 600/650D UL Listed Floor mount Rack loaded with one no 10Skt 5/15A power distribution unit, 4nos cable manager, Four nos 90CFM FANs, 1no HD Self and one pkt H/W screw. Make : Netrack/Valrack/Rittal/APW
1
-
-
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ Norpak
-
-
-
... More
20 MM
1400
-
-
... More
25 MM
1400
-
-
... More
Subhead- 1.a (IP-PBX System)
-
-
-
... More
Supplying and fixing of Hybrid EPABX system equipped with 128 Analog extensions and 6 Analog Trunk, including required hardware and software etc as reqd. Make-Matrix/Siemens/Coral
1
-
-
... More
Supplying desktop telephone sets with colour ID as reqd Make-Panasonic/Beetel
22
-
-
... More
S/f of 50 pair MDF box with 3 nos. krone module.
2
-
-
... More
S/f of 5O pair krone box with k2 no. krone module
2
-
-
... More
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
1233
-
-
... More
20 Pair
760
-
-
... More
Subhead- 3 (IP-CCTV System)
-
-
-
... More
Supply, Installation, Testing & Commissioning of Full High Definition 5MP( 2880 x 1624) resolution vandal proof dome/bullet camera, 1/3" Progressive Scan CMOS Sensor, IR Cut mechanical Filter for True Day & Night vision, Support dual streams, Onvif supported, IP66 Weather proof outdoor enclosure, Inbuilt Smart IR LEDs with intensity control, IR 30 mtr, H.264 / H.265, Supports android and iOS APP for Smart phone and tablets, with Inbuilt audio, -10°C to + 50°C, CE, FCC, RoHS . Make-Honeywell series 20/Pelco/Axis
36
-
-
... More
Supply , Installation, testing , commissioning of 32 Channel NVR with 4 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS). Make-Honeywell series 20/Pelco/Axis
1
-
-
... More
Supply & Installation of surveliance 8 TB HDD . Make: WD/ Segate/ Toshiba
2
-
-
... More
Supply & installation of 55'' IPS Ultra HD AI for 24x7 application TV.Make:LG/Samsung/Sony
1
-
-
... More
Supply and Laying of cat6 23Awg UTP cable through existing conduit, Make: Legrand/Systimax/Panduit
1300
-
-
... More
PA SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 1000 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make. Honeywell/Bose/Bosch/JBL
1
-
-
... More
Supplying, installation, testing & commissioning of 8 zone voice alarm controller with USB MP3 am/fm included 8 zone button paging station and microphoneMake. Honeywell/Bose/Bosch/JBL
1
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/15 Watt in ABS enclosure complete as required Make. Honeywell/Bose/Bosch/JBL
46
-
-
... More
Supplying, installing, testing and commissioning of 6 Watt ceiling mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms with back box as requiredMake. Honeywell/Bose/Bosch/JBL
32
-
-
... More
Supplying, installing, testing and commissioning of 6 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Make. Honeywell/Bose/Bosch/JBL
6
-
-
... More
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits.Make-Polycab/ Havells/ RR Cable
2044
-
-
... More
20 PASSENGER HOSPITAL LIFT WITH WIRRING(1.1)
-
-
-
... More
Supply,Installation, Testing & Commissioning of of 20 Passenger-cum-bed lift gearless with Machine room Capacity(1360 Kg),Elevator G+2 Floors with ACVVVF drive/Control with ARD 1.25 MPS, SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc . All SS Material shall be of SS-304 Grade and the thickness shall not be less than 1.6mm.Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respect.The Elevator should be suitable for physically handicapped person. make:OTIS/Mitsubishi
1
-
-
... More
13 PASSENGER LIFT WITH WIRRING(1.1)
-
-
-
... More
Supply,Installation, Testing & Commissioning of of 13 Passenger lift gearless with Machine room Capacity(884 Kg),Elevator G+2 Floors with ACVVVF drive/Control with ARD 1.25 MPS, SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc . All SS Material shall be of SS-304 Grade and the thickness shall not be less than 1.6mm. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respect.The Elevator should be suitable for physically handicapped person. make:OTIS/ Mitsubishi
1
-
-
... More
1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000)with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi/Carrier)
13
-
-
... More
2.0 TR high wall 5 star inverter type split A.C machine (BTU/Hr-21000-24000) with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi/Carrier)
30
-
-
... More
REFRIGRANT PIPING
-
-
-
... More
Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job.
-
-
-
... More
1 TR to 3 TR high wall split A.C
200
-
-
... More
FRAME WORK
-
-
-
... More
Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.
-
-
-
... More
1 TR to 3 TR high wall split A.C
43
-
-
... More
DRAIN PIPING
-
-
-
... More
Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.
-
-
-
... More
25mm nom. Dia pipe
200
-
-
... More
Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek
13
-
-
... More
Supply and fixing of 5kVA Voltage stabilizer (Make-V-Guard/Microtek
30
-
-
... More
VRV System
-
-
-
... More
Supply,Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type Scroll/Twin rotary Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 380-415 V, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.
The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more than 75 Pa to avoid hot air recirculation, auto address setting, automatic refrigerant charging,auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. .The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units.(Make: MITSUBISHI ELECTRIC /DAIKIN/O-General/Hitachi sigma model )
-
-
-
... More
Outdoor Unit of Nominal Capacity -20HP
1
-
-
... More
Supply,intallation,testing and commissioning OF FLOOR MOUNTED AHU 4000 CFM, 6R.D copper coil, -110 MM ST. PRESSURE /17 TR CAPACITY ,WITH VFD CONTROLLER AND starter panel & COOLING COIL with AHU Kit and refrigerent piping AND 4.5 KW HEATER BANK , INBUILT PRE ( 10 Micron ) & FINE FILTER ( 5Micron ) ,MIXING CHAMBER ARE PROVIDED FOR OT ROOM AIR CONDITIONING complete as per the direction of engineer incharge. (Make-Edgetech/ VTS/ ZECO/Trane/Systemair )
1
-
-
... More
Supply of 22G Aluminium ducting WITH 25MM nitrile rubber with alluminium coated INSULATION complete as per the direction of engineer incharge. (Make-Hindalco/ Nalco / Bhushan)
180
-
-
... More
Supply & Installation of Planair Ceiling system with unidirectional airflow. Plenum unit, Holding structure & Top plenum are made of Aluminium Sheet 1.5mm thk. with aluminum extrusion frame with hepa filter with H-14 Grade having efficiency 99.97% down to0.3 micron.. in plenum level or in AHU level (AHU Level is preferred) The laminar flow system shall have such design with Diffuser : 2 layer monofilament precision woven polyester of uniform porosity with an open area of sufficient resistance to create laminar from diffusers face and integral lighting provides an illumination level in excess of 15000 Lux in operating area and 10000 Lux other electronic without flicker Size 2400mm x 2400mm x350mm complete as per the direction of engineer incharge. ( Make-Spectrum/AAF )
1
-
-
... More
Fire fighting
-
-
-
... More
FIRE PUMP ROOM EQUIPMENT
-
-
-
... More
Supplying, installing testing and commissioning of electrical motor driven Main Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 1620LPM (96 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc.
1
-
-
... More
WILO/KIRLOSKAR/KSB
-
-
-
... More
Supplying, installing and commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out radiator cooling type with gland packing and capable to deliver 1620 LPM (96 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as perTAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation with diesel engine control diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), as per TAC including all associated electrical works.
1
-
-
... More
WILO/KIRLOSKAR/KSB
-
-
-
... More
Supplying, installing and commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation.The pump shall be coupled to motor of with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc.
WILO/KIRLOSKAR/KSB
1
-
-
... More
Control Panel for Fire pumps.
-
-
-
... More
Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 180 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 160 Amp 25 KA 3P with solid neutral SDFU Voltmeter with s/s, Ammeter with S/s, 3 Nos 100/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING: a)one (1)-125 Amp 3PMCCB,25kA with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 100/5, Ammeter S/S. b) 1 No (Outgoing) – 63 Amp 3PMCCB, 25Ka with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge. d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required. Make of switchgear-Legrand/Schneider/Siemens
1
-
-
... More
FABRICATED - CPRI APPROVED
-
-
-
... More
1100 V GRADE POWER / CONTROL CABLES
-
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. The minimum size of the cables shall as mentioned below,Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE
-
-
-
... More
a)3 core x 35 sqmm Aluminium conductor cable
56
-
-
... More
b) 3 core x 10 sqmm Aluminium conductor cable
25
-
-
... More
c) 8 core x 2.5 sqmm
30
-
-
... More
d) 2 core x 1.5 sqmm
40
-
-
... More
e) 3 core x 6 sqmm Aluminium conductor cable
60
-
-
... More
CABLE TRAY
-
-
-
... More
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.
85
-
-
... More
G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessory accessories as required. ( Earth pit shall be executed by other agencies).
85
-
-
... More
Supplying, installing, testing and commissioning of MS Pipes, ERW confirming to IS 1239 Pt - I HEAVY grade up to 150mm dia and pipes 200mm dia and above shall be M.S as per IS: 3589 with painting, suitable type of supports, anchor fasteners, bolts nuts, clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Make-TATA/SAIL/JINDAL
-
-
-
... More
200mm nominal dia
12
-
-
... More
150mm nominal dia
198
-
-
... More
100mm nominal dia
18
-
-
... More
50mm nominal dia
18
-
-
... More
25mm nominal dia
16
-
-
... More
Supplying, installing, testing and commissioning of C.I. waffer type Non-return valves ( PN 16 ) swing check type with required flanges, nuts, bolts and gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
150 mm nominal dia
2
-
-
... More
100 mm nominal dia
2
-
-
... More
Supplying, installing testing and commissioning of Cast Iron Body flanged Y-type Strainer with SS screen complete with suitable flanges, nuts, bolts, gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
150 mm dia
2
-
-
... More
100mm dia.
2
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
150mm nominal dia
6
-
-
... More
100mm nominal dia
4
-
-
... More
50mm nominal dia
1
-
-
... More
Supplying, Installing, testing and commissioning of CI Gate valves as per IS:14846(PN 1.0 Rating for suction side of the pumps) and rising sprindle type with flanges, bolts ,nuts, washers , gaskets etc. Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
200mm nominal dia
2
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.
-
-
-
... More
25 mm nominal dia
2
-
-
... More
Supply and installation testing and commissioning of differential Pressure switches of suitable range (0 to 12 bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc.Make-Indfoss/Danfoss
3
-
-
... More
Supply and installation testing and commissioning of Pressure gauges of suitable range (0-16 bar), 100 mm diameter dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / reducers etc.Make-H.Guru/G.Guru
4
-
-
... More
Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 200 mm dia MS pipe to 1200 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc.
1
-
-
... More
Exhuast pipe for Diesel engine of 80 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe supports also. Make-TATA/SAIL/JINDAL
12
-
-
... More
HYDRANT SYSTEM
-
-
-
... More
Supplying, installing, testing and commissioning of MS Pipes, ERW confirming to IS 1239 Pt - I Heavy grade up to 150mm dia and pipes 200mm dia and above shall be M.S as per IS: 3589 with painting, suitable type of supports, anchor fasteners, bolts nuts, clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Make-TATA/SAIL/JINDAL
-
-
-
... More
150mm nominal dia
72
-
-
... More
100mm nominal dia
112
-
-
... More
80mm nominal dia
48
-
-
... More
25mm nominal dia
36
-
-
... More
Excavation of trenches up to 1.5 mts. in depth, for laying pipes up to 150mm dia. Including forming bottom surface to required level, refilling the trenches with selected excavated earth around the pipe in layers of 150mm thick, watering, consolidating.
-
-
-
... More
Excavation in all kinds of soil
250
-
-
... More
If required , it will be paid as per actual measurement certified by client 's Engg.
-
-
-
... More
Supplying and wrapping of anti corrosive bituminous tape on bituminous paint.
200
-
-
... More
If required , it will be paid as per actual measurement certified by client 's Engg.
-
-
-
... More
Supplying, installing, testing and commissioning of C.I. waffer type Non-return valves ( PN 16 ) swing check type with required flanges, nuts, bolts and gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
100 mm nominal dia
2
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
100mm nominal dia
2
-
-
... More
Supplying, Installing, testing and commissioning of CI Gate valves as per IS:14846(PN 1.0 Rating for suction side of the pumps) and rising sprindle type with flanges, bolts ,nuts, washers , gaskets etc. Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
150mm nominal dia
4
-
-
... More
Supplying, erecting and commissioning of Hydrants
-
-
-
... More
Single headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc complete.Make-Newage/Minimax/Fireshield
9
-
-
... More
SS short branch pipe with nozzle conforming to IS 903.Make-Newage/Minimax/Fireshield
9
-
-
... More
M.S. Hose Box wall mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 750mm x 600 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside. Make-Newage/Minimax/Fireshield
9
-
-
... More
15 M long, 63mm dia RRL hose conforming to IS 636 Type A with SS instantaneous couplings and Hoses shall be stored inside fire Hose Box.Make-Newage/Minimax/Fireshield
18
-
-
... More
First aid Hose reel drum of 180° swinging type with 19mm dia Rubber braided hose of 30M. length with Ball Valve and 6mm diameter Shut off nozzle, complete. The hose reel shall conforming to IS 884.Make-Newage/Minimax/Fireshield
9
-
-
... More
Supplying, installing and commissioning of fire brigade inlet connection of 4 way with each of 63 mm dia. built - in Gun metal instantaneous coupling type arranged on 150 mm dia. Make-Kartar/Kirloskar/Zoloto
1
-
-
... More
Supplying and fixing approved make of 25mm dia automatic air release valve spring loaded type complete with unions etc. complete.
3
-
-
... More
KARTAR , FIRE SHIELD , EXFLAME
-
-
-
... More
AUTOMATIC SPRINKLER SYSTEM
-
-
-
... More
Supplying, installing, testing and commissioning of MS Pipes, ERW confirming to IS 1239 Pt - I Heavy grade up to 150mm dia and pipes 200mm dia and above shall be M.S as per IS: 3589 with painting, suitable type of supports, anchor fasteners, bolts nuts, clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Make-TATA/JINDAL/SAIL
-
-
-
... More
150mm nominal dia
50
-
-
... More
100mm nominal dia
175
-
-
... More
80mm nominal dia
78
-
-
... More
65mm nominal dia
112
-
-
... More
50mm nominal dia
134
-
-
... More
40mm nominal dia
86
-
-
... More
32mm nominal dia
186
-
-
... More
25mm nominal dia
450
-
-
... More
Supplying, Installing, testing and commissioning of C.I. wafer type butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar
-
-
-
... More
100mm nominal dia
3
-
-
... More
50mm nominal dia
3
-
-
... More
Supplying, installing, testing and commissioning of conventional Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating, K 80 and orifice shall not be less than 12.7mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.Make-Tyco/HD/Viaking
-
-
-
... More
Pendent sprinkler
300
-
-
... More
Sidewall sprinkler
40
-
-
... More
SITC of standard response glass bulb type UL approved 93 degree rated brass concealed pendent sprinklers having 15 mm NPT connection with all accessories.Make-Tyco/HD/Viaking
-
-
-
... More
5 mm glass bulb 79 deg. Side Wall Sprinkler
2
-
-
... More
Supplying, installing, testing and commissioning of hydralically operated Sprinkler control valve complete with water motor gong bell, basic trims as required, pressure gauges, pressure switch, drain valves, ball valves etc. complete. Alarm valve shall be UL Listed / FM approved.Make-system sensor/siemens
-
-
-
... More
100mm dia.
1
-
-
... More
Providing and fixing of Stainless steel corrugated flexible pipe(hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1000 mm long 25 mm dia with union / reducer collar, clamps etc. as required. Make-Tyco/HD/Viaking
300
-
-
... More
UL LISTED
-
-
-
... More
Providing and fixing of electric flow switch with mechanical time delay feature capable of sensing a minimum of flow of one sprinkler , including making electrical cable termination through input module & integrated with Fire Alarm System.Make-Honeywell/eq.
3
-
-
... More
AUTOMATIC FIRE DETECTION AND ALARM SYSTEM
-
-
-
... More
Supply, Installation,Testing & Commisioning of Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward
-
-
-
... More
4 Loop Panel
1
-
-
... More
Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch/Edward
6
-
-
... More
Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch/Edward
6
-
-
... More
Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module,base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward
180
-
-
... More
Supplying, installing, testing and commissioning of rate of rise heat detector with base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward
2
-
-
... More
Supplying, installing, testing and commissioning of 2C x 1.5 mm², armoured, single stand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE
2244
-
-
... More
FIRE EXTINGUISHERS
-
-
-
... More
Providing and Fixing ISI marked ABC stored pressure type Fire extinguisher of 6 Kgs. Capacity confirming to IS: 15683 with discharge hose, nozzle, Mono Amonium Phosphate base & ABC powder pressurised with nitrogen gas carrying handle and wall mounting bracket etc as required.Make-Safex/Fireshield/Ceasefire
12
-
-
... More
Providing and Fixing of 4.5 Kgs. Capacity CO2 gas type ISI marked fire extinguisher (IS: 15683) fitted with high pressure 1 mtr. Long discharge hose & horn complete with refill gas, carrying handle and wall mounting bracket etc as required.Make-Safex/Fireshield/Ceasefire
18
-
-
... More
Providing and Fixing of of 2 kG capacity Eco Friendly, Stored pressure type filled with HFC 134 A ( clean agent fire extinguishant having Zero Ozone depletion potential ) Clean Agent Fire Extinguishers with safety seal, pressure guage, controllable discharge mechanism, helium leak detection tested and conforming to IS 15683 complete with initial charge as required.Make-Safex/Fireshield/Ceasefire
10
-
-
... More
Providing and Fixing of Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. complete, confirming to IS: 15683.Make-Safex/Fireshield/Ceasefire
2
-
-
... More
Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
4
-
-
... More
Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.
2
-
-
... More
SIGNAGES
-
-
-
... More
Providing and installing in position the following tupe of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Make-Bajaj/Prolite
-
-
-
... More
Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm.
4
-
-
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.
10
-
-
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"
10
-
-
... More
Providing and fixing in position the signage of " Fire Hydrant & Hose Reel " to be fixed near the every fire shaft at all floors. . Size 6" x 8"
6
-
-
... More
Providing and fixing the signages "Main fire alarm panel".& Fire Pump Room
1
-
-
... More
Providing and fixing the signages "Assembly point - with symbol ( A2 Size)" - Size 17" x 22"
2
-
-
... More
Illumination Glow light for Exit Indication with Battery Back-up.
10
-
-
... More
S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time ≥ 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A1) size on steel frame with cc work.
1
-
-
... More
S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time ≥ 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A3) size on steel frame with cc work.
6
-
-
... More
External
-
-
-
... More
S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty)
24
-
-
... More
Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.
24
-
-
... More
Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.
24
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
14
-
-
... More
Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
-
... More
Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
2
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
65
-
-
... More
Supplying,installation,testing & commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB as outgoing Make-LEGRAND-dx3 / Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materials
1
-
-
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
350
-
-
... More
Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
32mm
150
-
-
... More
Lightening arrestor
-
-
-
... More
Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equivalent
562
-
-
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder. With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equivalent
282
-
-
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
20
-
-
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn/Equivalent
12
-
-
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
12
-
-
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3. Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
4
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/ Dehn/ Equivalent
8
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/Equivalent
8
-
-
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
8
-
-
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/Equivalent
8
-
-
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
160
-
-
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
15
-
-
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
20
-
-
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/Equivalent
3
-
-
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn/Equivalent
8
-
-
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/ Dehn/ Equivalent
8
-
-
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/Equivalent
8
-
-
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/ Dehn/ Equivalent
8
-
-
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
-
-
... More
160 KVA DG
-
-
-
... More
Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 160KVA ( Make -Kirloskar / Jakson/Mahindra) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV+ norms etc as per following specifications mentioned below. Warrentee period must be 2 years.
(a) ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.
(b) ENGINE: Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 160KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer standards.
-
-
-
... More
(c) AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 160KVA DG Set complete with Battery Charger & leads as required.
(d) BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. (e) FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos copper plate earthing for body and 4 nos copper plate earthing for neutral, control cable of 15mtr 2.5sqmm 6core , civil foundation work. (The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work)
1
-
-
... More
P.H. WORK
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
... More
20mm dia C - PVC pipe
-
-
-
... More
Ground floor
40
-
-
... More
First Floor
40
-
-
... More
Second floor
20
-
-
... More
25mm dia C - PVC pipe
-
-
-
... More
Ground floor
180
-
-
... More
First Floor
140
-
-
... More
Second Floor
105
-
-
... More
32mm dia C - PVC pipe roof of 2nd floor
120
-
-
... More
40mm dia C - PVC pipe roof of 2nd floor
150
-
-
... More
50mm dia C - PVC pipe roof of 2nd floor
180
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (FLR-ABR-5053N Jaquar make)
150
-
-
... More
15mm dia CP Long Body Bib cock (FLR-ABR-5047N Jaquar make)
30
-
-
... More
15mm dia CP two in one bib cock (FLR-ABR-5041N Jaquar make)
41
-
-
... More
20mm dia CP consealed stop cock(FLR-ABR-5083N Jaquar make)
2
-
-
... More
15 mm dia CP Bib cock Elbow Action (FLR-CHR-5031N Jaquar)
10
-
-
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
60
-
-
... More
WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
17
-
-
... More
25mm dia brass full way valve (Shakti make)
37
-
-
... More
32mm dia brass full way valve (Shakti make)
10
-
-
... More
40mm dia brass full way valve (Shakti make)
8
-
-
... More
50mm dia brass full way Valve (Shakti make)
10
-
-
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
41
-
-
... More
15mm CP Extension piece
293
-
-
... More
125mm CP grating
150
-
-
... More
15mm size C.P. flange
293
-
-
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank top of 2nd floor
12
-
-
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
Ground floor
40
-
-
... More
First Floor
40
-
-
... More
Second floor
40
-
-
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
Ground floor
40
-
-
... More
First Floor
40
-
-
... More
Second floor
40
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
120
-
-
... More
First Floor
100
-
-
... More
Second floor
20
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
340
-
-
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
40
-
-
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
50
-
-
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
40
-
-
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
30
-
-
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
15
-
-
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
40
-
-
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
80
-
-
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
30
-
-
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
60
-
-
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
90
-
-
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
3
-
-
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
6
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
European water closet with 's' trap plain(Hindware/Parryware/Neycer make)
3
-
-
... More
One piece commod(Hindware)ELEMENT Cat No.92084.
37
-
-
... More
EWC(Matrix set)No.70002(P-18)
1
-
-
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge ( stall urinal)
7
-
-
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
Halfpedestal basin(560x450)Hindware No.91049+91115
60
-
-
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
10
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
27
-
-
... More
CP towel Ring(Jaquar)ACN-ACR-1121N
60
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf (Jaquar make)
60
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
Design Large Mirror 60 x 0.90 x 0.90
48.6
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Jaquar)ACN-ACR-1131N
71
-
-
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
... More
15mm CP revolving shower (Jaquar)CON-CHR-209KN
19
-
-
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
100
-
-
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
50
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
8.92
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
Ground floor
8.92
-
-
... More
First Floor
13.8
-
-
... More
Second Floor
2.62
-
-
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Floor Tiles
-
-
-
... More
Ground Floor
89.24
-
-
... More
First Floor
69.03
-
-
... More
Second Floor
13.1
-
-
... More
Wall Tiles
-
-
-
... More
Ground Floor
102.95
-
-
... More
First Floor
92.18
-
-
... More
Second Floor
16.06
-
-
... More
Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( Vitrified floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 60cmx60cm
-
-
-
... More
Ground floor
89.24
-
-
... More
First Floor
69.03
-
-
... More
Second Floor
13.1
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
480.43
-
-
... More
First Floor
430.2
-
-
... More
Second Floor
74.95
-
-
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( Vitrified mat finish wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 60cmx30cm
-
-
-
... More
Ground floor
480.43
-
-
... More
First Floor
430.2
-
-
... More
Second Floor
74.95
-
-
... More
Granite Tiles 10mm thick
-
-
-
... More
Ground floor
1.35
-
-
... More
First Floor
1.8
-
-
... More
Supplying all materials, labour, T&P & constructing Surface drain of size A-4 type as per P.H. design & specification including lead of all materials to site.
93.23
-
-
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
105.34
-
-
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
327.36
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquagurd Pure Chill 120 PSS UV
5
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
100mm dia P.V.C. pipe
150
-
-
... More
150mm dia P.V.C. pipe
200
-
-
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
15
-
-
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
... More
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
20
-
-
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
-
-
... More
Supplying all materials labour T&P and laying soak way gallery with SW pipe with jointing laid packed all around with supply of stone boulders size 50mm to 150mm in (1:6) other than granite cover at top with layer of flat taller size 0.3048 x 0.3048x 0.2510m including earth work in excavation of trenches in all kinds of soil to an average depth of 1.52 m cover of earth at the gallery top all complete as per approved design and including carriage of all materials to site.
-
-
-
... More
100 mm dia SW pipe
20
-
-
... More
2 Nos 100 Users R.C.C.Septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
194.04
-
-
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
55.74
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
74.3
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
55.74
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
... More
In ground floor
228.8
-
-
... More
Supplying all materials,labour,T&P and providing 12mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
335.28
-
-
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 150mm x 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
4
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
-
-
... More
1 no 50,000ltr R.C.C. Sump
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
67.86
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
63.34
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
11.18
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
7.45
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.42
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
31.42
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
29.1
-
-
... More
RCC Beam, Column, wall etc
117.48
-
-
... More
RCC Plinth bend/ Raft
-
-
-
... More
Base slab
20.32
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
86.8
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
-
-
-
... More
Quantity same as item No-4
86.8
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
-
-
... More
Construction of 2nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
60
-
-
... More
30 mtr to 45mtr
30
-
-
... More
Drilling of 150mm dia bore
-
-
-
... More
45 mtr to 215.00mtr
340
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
60
-
-
... More
30 mtr to 60mtr
30
-
-
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
90
-
-
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
2
-
-
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
4
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
3
-
-
... More
DOL Control panel
3
-
-
... More
40mm dia steel short piece
3
-
-
... More
Well cap
2
-
-
... More
50mm size CI bracket
3
-
-
... More
2.50sqmm flat cable
260
-
-
... More
20mm dia rigid UPVC pipes
80
-
-
... More
Steel rope with cover
80
-
-
... More
Labour charges for lowering including transportation
3
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
240
-
-
... More
Rain Water Harvesting
-
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
150
-
-
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
20
-
-
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
40
-
-
... More
125mm CP grating
20
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
150mm dia P.V.C. pipe
80
-
-
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
8
-
-
... More
Supplying all materials labour T&P and constructing 1.80m diax2.60m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements