Rural Development Department Tender

Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Reinforced cement concrete M25 with clean hard crusher broken granite chips of 20mm and down graded size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position including 1% Cess and as per specification and direction of the Engineer-in-charge.

Column Base

Column & Beam

Plinth Band

Lintel Band

Chajja

Roof Slab

Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) including 1% Cess and as per specification and direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in super structure using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

20mm thick grading Cement plaster in C.M (1:4) over roof slab finished smooth including watering curing and with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

16mm thick Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

12mm thick Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Cement washing one coat with cement over new plaster surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Wall priming one coat with approved primer with brush to wall surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Distempering two coats with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Finishing walls with water proofing Weather coat of approved shade on new work two coats to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Providing, fitting and fixing Steel Angle Iron Door & Window frame manufactured from standard rolled steel angle section 40 mmx 40 mmx 6 mm size with cornered of the frame duly metered and electrically welded with fish tailed hold fasts made out of M.S. flats of size 200 mm x 50 mm x 30 mmx 5 mm thick welded to the frame at the rate of 6 nos per frame with 10 mm dia M.S round bar to be welded at the bottom at the bay with M.S. hinges of size 100 mm & 14SWG thick at the rate of 3 nos & 50 mm size one no for single leaf shutter aldrop, staple & tower bolt hinges duly welded to the frame with one coat of anticorrosive red oxide zinc chrome primer including 1% cess as per direction of Engineer in charge.

Door

Window

Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge.

Providing and fixing vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Providing and fixing wall tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Providing and fixing Granite tiles in floors, walls, treads landing etc on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Providing and fixing Virtified Industrial tiles in floors, walls, treads landing etc on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32 mm x 2 mm etc complete including cost, conveyance, taxes & labour, T&P and cess etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Supplying fitting and fixing of un-plasticised poly vinyl chloride (UPVC) (FENESTA/ NCL/ VEKA LTD). Casement Door-60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement door sash profile and 74mm x 60mm x 2.5mm mulion profile capable mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 micron of minimum thickness of 2.0 mm prefabricated and welded through fushion welding the dorr sash shall be fitted with 12mm thick WPC board of green play make duly fixed with EPDM wheatering seal resistance accessories like clipping locking the system made of alluminium 1No per set of sashes and the system is to be installed at the site using anchor fasteners, silicons rubber sealant, easy glazing/deglazing at site including cost and conveyance of all materials, accessories, labour charges, materials and product confirming to SATM D-638-14, EN-477-95 and other applicable codes and standards etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Supplying fitting and fixing of un-plasticised poly vinyl chloride (UPVC) (FENESTA/ NCL/ VEKA LTD). Three track-Three panel sliding Window-60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 micron of minimum thickness of 1.5 mm prefabricated and welded through fushion welding the window frame shall be fitted with 6mm thick clear touchenced glass of SAINT-GOBAIN make duly fixed with EPDM wheatering seal resistance and the system is to be installed using Unreinforced large coupier at the site using anchor fasteners, silicons rubber sealant, easy glazing/deglazing at site including cost and conveyance of all materials, accessories, labour charges, materials and product confirming to SATM D-638-14, EN-477-95 and other applicable codes and standards etc. complete in all respect including 1% Cess and as per specification and direction of the Engineer-in-charge

Supplying, fitting,fixing of roads sign board as per approve drawing including cost, conveyance,royality, taxes of all materials, labour, T&P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC:67-2010 made of A.C.P(Aluminium composite panel) used for sign boards with a thermoplastic core of low densigy polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4 mm and aluminium thikness of 0.5 mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause - 801.3 supported on a mild steel angle iron post 75 mmx75 mmx6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 40cmx40cmx60cm below ground level as per approved drawing including excavation, curing etc. complete under the supervision of Engineer-in-Charge and including 1% cess and direction of the Engineer-in-Charge.

1800mmx1200mm size board