Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CERWI_77408_1Bid Award Id
ViewTender No
Online Tender/08-2022-23/BPRTender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing cement concerete (1:2:4) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of EIC.
-
-
-
Ground Floor
29.25
-
5801.36
Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the EIC.
-
-
-
Ground Floor
155.91
-
4220.37
Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.
-
-
-
Foundation & Plinth
42.58
-
3962.62
Flyash brick masonary in cement mortar (1:6) in superstructure and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.
-
-
-
Ground Floor
167.02
-
3995.95
First Floor
174.01
-
4260.85
Second Floor
167.02
-
4565.47
Third Floor
42.18
-
4915.75
Flyash brick masonary in cement mortar (1:4) in superstructure using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.
-
-
-
Ground Floor
5.2
-
4214.4
First Floor
6.2
-
4479.3
Second Floor
6.2
-
4783.92
RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved
-
-
-
quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, Cess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)
-
-
-
Column Base
347.1
-
5223.52
Plinth Beam
46.18
-
5592.79
Column in Super structure (Ground Floor)
55.01
-
12511.16
Column in Super structure (First Floor)
35.45
-
13750.91
Column in Super structure (Second Floor)
35.45
-
15074.75
Column in Super structure (Third Floor)
12.69
-
16457.75
Wall Beam & Roof Beam (Ground Floor)
44.91
-
12511.16
Wall Beam & Roof Beam (First Floor)
43.77
-
13750.91
Wall Beam & Roof Beam (Second Floor)
43.91
-
15074.75
Wall Beam & Roof Beam (Third Floor)
9.2
-
16457.75
Stair case ( Ground Floor )
5.5
-
10500.9
Stair case (First Floor)
5.5
-
11458.59
Stair case (Second Floor)
5.5
-
12480.28
Lintel (Ground Floor)
3.53
-
8825.48
Lintel (First Floor)
3.61
-
9305.36
Lintel (Second Floor)
3.28
-
9842.43
Lintel (Third Floor)
0.12
-
10355.43
Chajja & fins (Ground Floor)
18.9
-
814.43
Chajja & fins (First Floor)
20.4
-
879.21
Chajja & fins (Second Floor)
19.35
-
947.21
Chajja & fins (Third Floor)
1.65
-
1016.64
Roof Slab (Ground Floor)
95.7
-
9476.05
Roof Slab (First Floor)
95.7
-
10099.28
Roof Slab (Second Floor)
95.7
-
10763.54
Roof Slab (Third Floor)
20.65
-
11441.56
Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge.
-
-
-
Ground Floor
489.86
-
10940.57
First Floor
213.71
-
10964.21
Second Floor
213.62
-
10987.97
Third Floor
51.56
-
11011.85
6mm thick cement plaster (1:4) to ceilling and R.C.C. surfaces finished smooth including closed deep chipping & slury treatment including cost,coveyance,royalities of all materials etc all complete as per direction of the Engineer in charge.
-
-
-
Ground Floor
1113.37
-
155.05
First Floor
1146.57
-
158.89
Second Floor
1159.09
-
162.85
Third Floor
82.86
-
166.93
12mm (1/2”) thick cement plaster (1:4) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge.
-
-
-
Ground Floor
92.58
-
198.78
First Floor
110.18
-
203.31
Second Floor
110.18
-
207.99
12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge.
-
-
-
Ground Floor
814.28
-
138.05
First Floor
1133.96
-
143.54
Second Floor
810.05
-
149.3
Third Floor
68.63
-
155.35
16mm (5/8") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge
-
-
-
Ground Floor
468.27
-
197.04
First Floor
547.24
-
201.94
Second Floor
440.62
-
206.98
Third Floor
114.68
-
212.17
20mm (3/4") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and cess required for the work with all taxes and royalties etc, complete in all respect in all floors as per direction of Engineer-in-charge.
-
-
-
Second Floor
765.6
-
228.78
Third Floor
133.21
-
233.97
Supplying and fitting fixing of Un-plasticised poly Vinny Cholride (UPVC) (FENESTA/NCL VEKA LTD) Casement window with top fixed 60 searies duly manufactured using UPVC reinforced profile PVC reinforced profile of 60mm x 545mm x 2.5mm for outer frames, 75mm x 60mm x 2.25 mm for casement window sash profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes in system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.
-
-
-
Ground Floor
28.08
-
7586
First Floor
30.24
-
7586
Second Floor
28.08
-
7586
Supplying and fitting fixing of Un-plastricised poly Vinny Cholride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator Top Hung 60 searies duly manufactured using UPVC reinforced profile PVC reinforced profile of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25 mm for casement window sash profile capable of mounting single glazing system structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes in system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDM D 638-14-EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.
-
-
-
Ground Floor
4.68
-
7115
First Floor
5.04
-
7115
Second Floor
5.04
-
7115
Third Floor
0.72
-
7115
Supplying and fitting fixing of Un-plasticised poly Vinny Cholride (UPVC) (FENESTA/NCL VEKA LTD) Three Track - Three Panel Sliding Window Casement window with top fixed 60 searies duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.
-
-
-
Ground Floor
23.4
-
5984
First Floor
25.2
-
5984
Second Floor
23.4
-
5984
Supplying and fitting fixing of Un-plastricised poly Vinny Cholride (UPVC) (FENESTA/NCL VEKA LTD) Casement door 60 searies duly manufactured using UPVC reinforced profile of 60mm x 55mm x 2.5mm for outer framEs, 102mm x 60mm x 2.25 mm for casement door sash profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefebricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM wheathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes in system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials, accessories, labour charges materials and product conforming to ASDMD 638-14-EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.
-
-
-
Ground Floor
34.44
-
8963
First Floor
30.24
-
8963
Second Floor
24.57
-
8963
Third Floor
1.89
-
8963
Providing 20 cm X 30 cm ceramic wall tiles fixing in dadoos skriting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of tiles watering & curing for 7 days with cost conveyance royalty and taxes of all materials & labour T&P with cess required for the work etc, complete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge.
-
-
-
Ground Floor
95.37
-
1036.48
First Floor
102.51
-
1087.32
Second Floor
102.51
-
1129.81
Providing 30Cm X 30 Cm ceramic floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge.
-
-
-
Ground Floor
42.5
-
941.26
First Floor
44.23
-
962.39
Second Floor
44.23
-
983.61
Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge
-
-
-
Ground Floor
64.19
-
189.3
First Floor
38.04
-
194.24
Second Floor
33.31
-
199.19
Third Floor
4.25
-
204.16
Wall painting two coats with water proofing cement paint of approved shade over a coat of wall primer to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
814.28
-
90.6
First Floor
1133.96
-
92.83
Second Floor
810.05
-
95.06
Third Floor
68.63
-
96.53
Distempering two coats over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffloding, staging charges with cost, conveyance taxes of all materials cost of all labour T&P etc complete as per the direction of Engineer-in-Charge
-
-
-
Ground Floor
1674.22
-
121.95
First Floor
1803.99
-
125.05
Second Floor
1709.9
-
128.16
Third Floor
197.54
-
131.28
Fixing Kota tiles in floors,treads or steps and landings on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing cost of tiles, all materials and labour, T&P, Royality, Taxes, Cess etc. complete as per specification and direction of E.I.C..
-
-
-
Ground Floor
646.77
-
981.03
First Floor
667.45
-
1002.15
Second Floor
669.08
-
1023.38
Fixing Kota tiles in dados,skirting and in risers of steps on 12mm thick bed of cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing cost of tiles and labour, all materials T&P, Royality, Taxes, Cess etc. complete as per specification and direction of E.I.C..
-
-
-
Ground Floor
79.8
-
1076.25
First Floor
73.94
-
1127.48
Second Floor
74.11
-
1169.97
Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P, Cess etc. required for the complete as per specification and direction of E.I.C.
-
-
-
Ground Floor
20.84
-
3499.54
First Floor
8.06
-
3499.54
Second Floor
8.06
-
3499.54
Providing & Supplying of door shutter of MS door including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
610.05
-
75
First Floor
591.68
-
75
Second Floor
518.18
-
75
Third Floor
66.15
-
75
Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:2:4) etc.complete as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
17.43
-
23.43
First Floor
16.91
-
23.43
Second Floor
14.81
-
23.43
Third Floor
1.89
-
23.43
Providing & supplying collapsible steel shutter with verticle channel 20x10x2.00 mm and brased with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolt, nuts locking arrangement, stoppers, handles including applying a priming coat of approved steel primer including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
4.86
-
7551
Labour for fitting and fixing of collapsible steel shutter including filling the holes with C.C (1:2:4) etc.complete as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
4.86
-
70.1
Providing & Supplying of M.S. iron grill & grill gate as per approved design specification size including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
702
-
59.64
Labour for fitting and fixing of M.S. iron grill & grill gate including filling the holes with C.C (1:2:4) etc.complete as per direction of Engineer-in-Charge.
-
-
-
Ground Floor
28.08
-
13.15
PH WORKS
-
-
-
A) INTERNAL W/S
-
-
-
Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall.ceiling and floor testing all complete as per specification and direction of E.I.C.
-
-
-
15mm dia C-P.V.C. pipe
21
-
131.9
20mm dia C-P.V.C. pipe
18
-
150
25mm dia C-P.V.C. pipe
200
-
194.2
32mm dia C-P.V.C. pipe
40
-
239.5
Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
-
-
-
250mm thick brick walls (G.F)
36
-
48.6
Supplying all materials,labour,T&P and cutting pucca floors and walls for taking G.I./ P.V.C pipes and making good the damages as per direction of the E.I.C.
-
-
-
brick walls (G.F)
60
-
164.6
Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.
-
-
-
15mm dia. C.P Bibcock (Short body)
21
-
871.8
15mm dia. C.P Bibcock (long body)
9
-
987.9
15mm dia.C.P concealed stopcock
2
-
1032.3
15mm dia.C.P angle stopcock
60
-
858.1
15mm dia C.P pillarcock
16
-
829.5
25mm dia. PVC ball valve
2
-
915
25mm dia. PVC ball cock
3
-
550
32mm dia. PVC ball valve
2
-
1382.4
15mm dia C.P flange
71
-
40
15mm dia C.P Extension piece.
71
-
236.5
15mm dia. P.V.C Bib cock
2
-
236.5
15mm CP 2in1 Bib cock
21
-
999.5
B). INTERNAL S/I
-
-
-
Supplying all materials,labour,T&P and fitting & fixing U-PVC SWR soil waste ventilating pipes and fittings of the following O.D conforming tc ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufact urer's specification,testing,e.w in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C
-
-
-
(a) 110mm dia pipe
320
-
213.3
(c) 110mm dia P trap
32
-
271
(d) 110mm dia door Tee
36
-
241.7
(e) 110mm dia Door Cross Tee
12
-
292.9
(f) 110mm dia Plain Tee
40
-
241.7
(g) 110mm dia. Door bend
12
-
121.2
(h) 110mmdia. Plain/Shoe bend
36
-
75.8
(j) 125mm dia. C.P. Grating
32
-
80.1
(k) 110mm dia. Offset.
12
-
157
Supplying all materials,labourJ&P and cutting holes through brick/stone masonary walls for taking H.C.I/PVC pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
-
-
-
(a) 250mm to 375mm thick wall
36
-
220.7
Supplying all materials,labourT&P and cutting holes through r.c.c walls,floors,roofs for taking H.C.I/PVC pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
12
-
154
Supplying all materials,labour,T&P and fixing water closet.squatting pan (Indian type W.C pan/ Orissa pattern squating pan) duly embeded in c.c(1:5:10) using 4 cm h.g metal all complete as per direction of E.I.C.
-
-
-
E.W.C P/S-trap with seat cover
21
-
2843.8
Providing and fixing Urinal spreader complete as per direction of E.I.C.
9
-
283.8
Supplying all materials,labour,T&P and fitting&fixing 10litres capacity low level flushin cistern with a pair of cast iron or m.s brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float,c.p brass handle,unions and couplings for connection with inlet,outlet and overflow pipes,32mm dia.c.p flush bend,15mmdia.pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closetand connecting inlet pipe with supply mainetc.all complete as per specification and directionof E.I.C.
21
-
1470.3
Supplying all materials,labour,T&P and fixing wash basins with pedetstal with hole for pillar taps with C.I/M.S brackets painted white with 40 mm CP waste,40 mm PVC pipe ,waste pipe including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.
-
-
-
550mmx400mm W.H.B
16
-
4412.3
supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick F A.C sheet or plywood sheet and fixed to wooden plugs with Cpscrews and washers complete as per P.H specification and direction of Engineer in charge
-
-
-
600mmx400mm B.E Mirror (fixed type)
16
-
761.8
Supplying all materials,labour.T&P and fixing standard size C.P towel ring, rails coat hooks complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
-
-
-
CP towel ring
6
-
813.3
Supplying all materials,labour,T&P and fixing standard size C.P soap holder complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
9
-
382.9
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.
1
-
5286.4
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. (Porcelain -Flat back standing urinal 430x260x350mm size)
9
-
1653
Supplying all materials, labour, T&P and fixing C.P/Brass waste of the following nominal diameter for wash hand basin complete etc all complete as per specification and direction of the E.I.C.
-
-
-
40 mm dia C.P/Brass waste
16
-
119.3
Supplying all materials,labour, T&P and fixing standard sized CP Toilet Paper holder complete with fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
21
-
284.4
SUB HEAD (I) :- SANITARY FIXTURES (DSR ITEMS)
-
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
16
-
791.29
SUB HEAD (I) :- SANITARY FIXTURES (AOR ITEMS)
-
-
-
Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.
21
-
1224
Providing and Fixing stainless steel Horizontal / Vertical grab bar 600mm length fixed to PVC cleats with C.P. brass screws wherever required with approved make & quality and as per the directions and to the satisfaction of Engineer-in-charge.
1
-
3840
SUB HEAD (II) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (AOR ITEMS)
-
-
-
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 8 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.
-
-
-
32 mm dia.
18
-
115
50 mm dia.
18
-
195
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
5
-
238.04
SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (DSR)
-
-
-
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
45 cm length (15 mm nominal bore)
37
-
76.07
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
1528.71
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1 CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.
-
-
-
Internal work - Exposed on wall
-
-
-
32mm nominal outer dia pipes
23
-
447.28
40mm nominal outer dia pipes
16
-
602.1
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
1
-
675.98
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
32 mm nominal bore
1
-
526.7
40 mm nominal bore
6
-
631.52
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
5589.45
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
20000
-
8.66
EXTERNAL S/D & CIVIL (OSR)
-
-
-
Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.
5
-
19245
Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of EIC.
-
-
-
a)Initial lift up to 1.50m
-
-
-
S. Tank :-1 x 6.06 m x 3.46 m x 1.50 m=31.45cum
31.45
-
204.22
(b).From 1.50m to 3.00m depth
-
-
-
1no x 6.06 m x 3.46 m x 1.50 m=31.45 cum
31.45
-
219.22
Supplying all materials, labour, T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc .all complete as per direction of Engineer in charge.
-
-
-
Ground Floor-
-
-
-
S.tank:-1no x 6.06 m x 3.46 m x 0.15 m=3.14 cum
3.14
-
403.4
Supplying all materials, labour, T&P and providing c.c(1:3:6) using 4cm h.g metal including water ing ,cu ring, conveyance of all materials to worksite payment of royalty .taxes etc. all complete as per specification and direction of Engineer in charge.
-
-
-
B.P.Chamber:-
3.18
-
3873.1
Supplying all materials, labour, T&P and providing C.C(1:1.5:3) using 12mm h.g chips including watering. curing, conveyance of all materials to worksite payment of royalty. taxes etxxall complete as per specification and direction of E.I.C.
4.62
-
6334.5
Supplying all materials, labour. T&P and providing brick work with K.B bricks having c. s not less than 75kg/cm2 with dimensional tolerance +/-8% including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of Engineer in charge.
-
-
-
In F&P in c.m(1:6) B.W.Protection chamber-
0.64
-
3924.6
In F&P in c.m(1:3) S.Tank:-
26.45
-
4305.2
Supplying all materials,1abour,T&P and providing rigid & smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty .taxes etc.all complete as per specification and direction of E.I.C.
7.68
-
437.3
Supplying all materials, labour,T&P and providing M.S reinforcement for R.C.C works including cutting ,bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification and direction of E.I.C.
1.78
-
8903.6
Supplying all materials, labour,T&P and providing c.c(1:1.5:3) using 12mm h.g chips for R.C.C works including oisting,laying,watering,curing,conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification and direction of E.l,C.
-
-
-
(a) R.c.c (1:1/5:3)
1.73
-
6334.5
W.H.B.Slab:-
Supplying all materials, labour,T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per pecification and direction of E.I.C.
-
-
-
20mm thick C.P.(1:3)
38
-
236.8
12 mm thick C.P in C:M (1:3)
4.15
-
156.7
Supplying all materials, labour,T&P and providing cement punning including watering, curing. conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification ion and direction of Engineer in charge.
35
-
21
Supplying all labour, materials T&P and fixing of 2" R.C.C.Baffle wall precast with C.C.(1;1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.M. Specification and direction of E.I.C
1.62
-
849.4
Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
15
-
256.3
Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all "materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.
-
-
-
16OmmXI 60mm X160mm PVC Tee/Y
2
-
566.7
Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C
5
-
304
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing, conveyance of all mat erials to worksite, payment of royalty.taxes etc. all complete as per specification and direction of E.I.C.
49.73
-
140.6
Filling in F&P with excavated materials, including watering and ramming as per direction of Engineer in charge.
20
-
114.59
Supplying all materials, labour,T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in c.c (1:1.5:3) using 12mm size h.g chips/foundation concrete (1:3:6) using 40mm size h.g metal on bed and arround trap,K.B brickwork in c.m(1:6) in F&P and inside 12mm thick c.p(1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
(a).Inside size 250mmx250mm
5
-
1467.6
Supplying all materials,labour,T&P and costructing Inspection chamber of the following sizes with c.c(1:3:6) using 40mm size h.g metal on ed,1st class K.B.brickwork in c.m(1:6),moulding and shaping the channel inside and benching with c.c(1:1.5:3) using 12mm size hg chips, 12mm thick c.p(1:3) with punning to inside,cement flush pointing (1:3) to outside,R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips with R.C.C m.h cover.e.w in excavation in all kinds of soil and refilling the cavity arround the chamber including watering,curing,conveyance of all materials to site payment of royalty.taxes etc.all complete as per approved specification and direction of the E.I.C.
-
-
-
Inside size 760mmx760mmx460mm
5
-
8251.4
Addle.depth
2
-
870.3
Supplying all materials,labour,T&P and costructing man hole chamber of the following sizes with c.c(1:4:8) using 40mm size h.g metal onbed,Ist class K.B.brickwork in c.m(1:6),moulding and shaping the channel inside and benchingwith c.c(1:2:4) using 12mm size h.g chips,12mmthick c.p(1:3) with punning to inside,cement flush pointing (1:3) to outside,R.C.C cover slabin c.c(1:2:4)using12mmsizeh.gchipswithR.C.Cm.hcover,e.winexcavationinallkindsofsoilandrefillingthecavityarroundthechamberincludingwatering,curing,conveyanceof all mate- rials to site payment of royalty,taxes etc.all com-plete asper approved specification and direction of the E.I.C.
-
-
-
Inside size 900mmx900mmx900mm
1
-
14762.2
Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class K.B brickwork in c.m(1:6) for the remaining height attop,12mmthickc.p(1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works.watering.curing,conveyance of all materials to worksite, payment of royalty .taxes etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
1.20m dia.x 2.00m deep
2
-
14913.9
Supplying all labour.materials T&P and laying of U-PVC soil waste pipe of the following internal diametre confirming to I.S.in trenches of the depth upto 1,2mtr including jointing with supply of approved rubber, lubricant by non - heat application method on beding with 150mm thick C.C.(1:3:6) using h.g. metal of 25mm to 40mm and then making allround encasing including earth work excavation in all kinds of soil , refilling the trenches , watering, curring, conveyance of all materials to site , payment of royality , taxes etc. and testing all complete as per P.H. Specification and direction of Engineer in charge.
-
-
-
100mm dia.with haunch top encasing.
35
-
846.4
Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.
-
-
-
160 mm dia PVC Pipe all round
30
-
1644.8
Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.
-
-
-
160 mm dia PVC gallary
5
-
1213.2
External Water Supply
-
-
-
Borewell
-
-
-
(Sinking of 150mm x 125mm dia tube-well through DTH Rigs in hard formation Areas.)
-
-
-
Labour for drilling a perfectly vertical bore holes of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilled rig as required to suit the site condition as per the direction of E.I.C. including use of own rig with its accessories, tools and plants and consumable etc. for lowering of 125mm dia consumable etc. for lowering if 125mm dia PVC/GI Pipes for housing filled with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC) casing pipes it required to prevent collapse of overburden portion is to be provided by the contractor including lowering and withdrawing after completion of tubewell.
-
-
-
(a).Drilling of 150mm dia bore.
-
-
-
i).0m to 30m
30
-
611.7
ii).30m to 35m & above
10
-
611.7
(b).Drilling of 125mm dia bore. (35m to 60m & above)
50
-
611.7
Lowering the following sizes GI/PVC Pipes with or without slotted pipes as per the necessity from gravel level upto 30 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plants etc. completes and keeping the top of the casing pipes threaded including plugging tubewell to prevent entry foreign materials. From above (Labour + cost )
-
-
-
lowering of150mm dia. P.V.C pipe with cost
40
-
995.75
Cleaning and developing the tube wells with their own compressor continuously jworked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC
1
-
3297.6
Supplying all labour T&P and materials for fitting and fixing of India Mark-II Deep well Hand pump with cast iron cylinder, 12mm/16mm dia B.S. connecting rod, 32mm dia G.I. Pipe of required lengths with supply of extra socket of approved make all complete including carriage, conveyance as per direction of Engineer-in-charge.
1
-
15935
Supplying of all material labour T&P and for construction of tube well platform as per specification and direction of EIC.
1
-
4000
Supplying all materials labour T&P and constructing Re-charge pit of the following sizes with precast RCC rings joined loose gravel packing in the rear of well stenining, jprecast RCC cover slab in cc (1:1.4:3) using 12mm size hg chips fitted with j;iron lifting handles including e.w. in open well excavation in all kinds of soiol and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royality taxes etc. all complete as per approved drawing, specification and directioin of E.I.C.
-
-
-
0.90mtr dia x 1.80mtr deep
1
-
4600
Installation of pump set
-
-
-
Supplying all materials,labour,T&P and fixing 1.00 H.P single phase submersible pump set including lowering,testing and commissioning as per direction of E.I.C.
1
-
18500
Supplying all materials,labour,T&P and fixing D.O.L starter for 1.00 H.P single phase submersible pump set including testing and commissioning as per direction of E.I.C.
1
-
4000
Supplying all materials,labour,T&P and fixing suitable cable for connecting pump and starter including testing and commissioning as per direction of E.I.C.
79
-
70
Supplying all materials,labour,T&P and fixing of plastic rope,M.S well cover,M.S clamps etc. all complete as per direction of E.I.C.
1
-
1800
32mm dia. H.D.P.E Pipe
70
-
175
32mm dia. Steel short piece
2
-
550
Iron Box
1
-
1200
ELECTRICAL WORKS
-
-
-
Point wiring in PVC conduit, with piano type switch :-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
147
-
297.38
Group B
15
-
525.27
Group C
15
-
804.13
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
91
-
227.77
Group B
12
-
258.2
Group C
12
-
288.63
Circuit / Sub main wiring in PVC conduit :-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.
700
-
126.07
2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire.
630
-
140.03
2 x 6 sq.mm. + 1 x 2.5 sq.mm. Earth wire
15
-
188.49
2 x 10 sq.mm. + 1 x 4 sq.mm. Earth wire
30
-
249.75
4 x 10 sq.mm. + 2 x 4 sq.mm. Earth wire
50
-
413.16
S/F light plug point piano type accessories :-
Wiring to 5 A Plug Point ( 2x1.5 + 1x1.5 )
-
-
-
Short Point
9
-
202.6
Medium Point
56
-
202.6
Long Point
11
-
202.6
S/F of MS Box 150 x 75 x 60
76
-
125.54
Twin Control Point wiring in PVC conduit, with piano type switch :-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, 2 way piano type switch, phenolic laminated sheet, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
8
-
870.54
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
170
-
178.57
S/F power plug point piano type accessories :-
Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
8
-
273.69
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth metal enclosed plug top along with 20 amps. "C" curve, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.
1
-
1100
S/F modular type electronic fan regulator :-
Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
82
-
282.23
S/F modular type blanking plate :-
Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
15
-
28.57
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `B' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(single pole)
96
-
130.16
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (8 way , Double door)
1
-
1621.24
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, nclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (12 way (4 + 36), Double door)
1
-
8775
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(40 amps.)
10
-
1870.54
Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
10
-
7.14
Supplying and fixing following way, horizontal type TP&N, sheet steel MCB distribution board, 415 V on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).(12 way (4 + 36), Double door)
3
-
10334
Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts, MCB "C" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25/40 amps FP MCB
8
-
2685
32 amps DP MCB
3
-
849
100 amps FP MCCB, 25ka.
1
-
8891
S/F MODULAR BOXES, BASE & COVER PLATE :-
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required (1 or 2 Module (75 mm x 75 mm)
3
-
216.96
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required :(25mm)
45
-
80.36
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.(1 run of cable)
50
-
43.75
Earthing with Copper earth plate 600mm x 600 mm x 3.15mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/ coke and salt as required.
2
-
5596.28
Supplying and laying 25 mm x 5 mm. Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
30
-
482.83
Providing and fixing 8 SWG dia Copper wire on surface or in recess for loop earthing as required.
35
-
92.79
Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/ coke and salt as required.
4
-
5550
Providing and fixing of lighting conductor finial, made of 25 mm dia. 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
6
-
400
Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required ( For horizontal run )
150
-
92.86
Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required ( For vertical run )
70
-
145.54
Providing and fixing testing joint, made of 20mm. x 3mm. thick G.I. strip, 125mm. long, with 4 nos of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.
7
-
91.07
Providing & laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required.
21
-
157.14
Providing and fixing M.V. danger notice plate of 200mmx150mm made of mild steel, atleast 2mm thick and vitreous enamelled white on both sides and with inscription single red colour on FRLSont side as required.
5
-
201.79
Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required.
2
-
120
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1cement : 2 fine sand ) including trenching (75 cm deep) and refilling etc as required.(150 mm. dia. )
50
-
533.93
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for
ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5
mm thick M.S. sheet with its top surface hacked for proper bonding,
top lid shall be screwed into the cast iron/ M.S. sheet box by means of
3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
82
-
153.79
Supply & Fixing of 18/25W WALL MOUNTED LED with all accessories as per standard item.. ( Crompton, Philips, Polycab, Havells )
7
-
683
Supply & Fixing of 25/20W SURFACE MOUNTED LED with all accessories as per standard item..( Crompton, Philips, Polycab, Havells )
172
-
683
Supply & Fixing of 20/18W SURFACE MOUNTED LED with all accessories as per standard item..( Crompton, Philips, Polycab, Havells )
58
-
683
Supply & Fixing of 45W LED Street Tube with all accessories as per standard item.. ( Crompton, Philips, Polycab, Havells )
6
-
5706
ERECTION OF LIGHTING FIXTURES AND FANS
Installation, testing and commissioning of pre-wired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
237
-
150
Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
82
-
181.25
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep)
7
-
324.11
Supply of 15W SURFACE MOUNTED LED with all accessories as per standard item..( Crompton, Philips, Polycab, Havells )
54
-
1829
SUPPLY OF CEILING & EXHAUST FANS
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI with 5 star marked & energy efficient complete as required. (Such as Havells Velocity HS, Anchor, Usha, Crompton or Equivalent). (1200 mm sweep)
82
-
1947
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting FRLSame and other accessories etc. Complete as required (Such as Ventil Air - DX White, Usha, Almonard, Polycab, Crompton or Equivalent). (300 mm sweep 900 rpm)
7
-
1710
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements