Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Department Of Radiation Oncology (cancer Care Centre) At F.m Medical College And Hospital, Balasore
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_80244_3Bid Award Id
ViewTender No
C.E. (B) - 12 / 2022-23Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
DRAIN
296.78
-
-
... More
Earth work in excavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
-
-
-
... More
Building Proper
4046.37
-
-
... More
Utility Block
111.78
-
-
... More
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
-
-
-
... More
Building Proper
8523.34
-
-
... More
Utility Block
407.64
-
-
... More
DRAIN
26.98
-
-
... More
ROAD
717.48
-
-
... More
SITE FILLING
8144.33
-
-
... More
Single under reamed bored compaction cast-in-situ RCC Pile with M-30 grade concrete including cost of boring to required dia meter and depth to plumb and taking precautionary measure against collapsing of side soil due to presence of water table using bentonite powder etc., concreting and driving the cage made of M.S. / T.S. steel as per approved drawing into the freshly laid concrete vertically by means of power winch to requied depth but excluding cost of M.S. / T.S. steel and labour charges for cutting, bending and binding of steel etc. complete confirming to IS-2911 specification including necessary routine tests including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the specification and instruction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Single under ream pile (8.0m depth)
375 mm dia and 6.0 metre long Per 1 pile Excavation of bore hole
7380
-
-
... More
For each additional depth of 1.00m beyond initial depth of 6.0m up to 8m add extra to the rate Per 1 Pile.
2460
-
-
... More
Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
716.06
-
-
... More
Utility Block
43.46
-
-
... More
DRAIN
26.98
-
-
... More
ROAD
275.29
-
-
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. etc. complete in all respect as directed by the Engineer- in -charge.
-
-
-
... More
Building Proper
2705.52
-
-
... More
Utility Block
174.7
-
-
... More
SITE FILLING
3490.43
-
-
... More
Disposal of excavated surplus earth from the worksite by mechanical means within a lead of 5Km including loading and unloading etc. complete. in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
1930.33
-
-
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
-
-
-
... More
Building Proper
1947
-
-
... More
Utility Block
300
-
-
... More
R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
RCC in Foundation & Plinth
3428.1
-
-
... More
RCC in Plinth beam
233.51
-
-
... More
RCC wall
538.01
-
-
... More
Lift pit Base slab
4.16
-
-
... More
Utility Block
-
-
-
... More
RCC in Footing
21.6
-
-
... More
RCC in Tie beam
8.6
-
-
... More
R.C.C. in Column
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
374.18
-
-
... More
First floor
190.03
-
-
... More
Second floor
168.7
-
-
... More
Terrace Floor
72.49
-
-
... More
Utility Block
-
-
-
... More
Ground floor
41.55
-
-
... More
First floor
11.79
-
-
... More
R.C.C. in Roof Beam
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
163.49
-
-
... More
First floor
186.42
-
-
... More
Second floor
166.35
-
-
... More
Terrace Floor
39.43
-
-
... More
Utility Block
-
-
-
... More
Ground floor
10.46
-
-
... More
First floor
8.07
-
-
... More
RCC in Roof Slab
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
224.5
-
-
... More
First floor
279.34
-
-
... More
Second floor
279.37
-
-
... More
Terrace Floor
68.7
-
-
... More
Utility Block
-
-
-
... More
Ground floor
15
-
-
... More
First floor (Double stage shuttering)
30
-
-
... More
Bunker roof slab (Roof slab at 6.0m level from Finished floor level)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
444.96
-
-
... More
First floor (RCC in Roof slab (Double stage shuttering)
26.92
-
-
... More
R.C.C. in Stair Case
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
22.11
-
-
... More
First floor
24.41
-
-
... More
Second floor
20.1
-
-
... More
Terrace Floor
1.3
-
-
... More
R.C.C. in Lintel
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
20.74
-
-
... More
First floor
22.63
-
-
... More
Second floor
23.04
-
-
... More
Terrace Floor
6.11
-
-
... More
Utility Block
-
-
-
... More
Ground floor
2.39
-
-
... More
First floor
2.05
-
-
... More
R.C.C. in Sill
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
11.89
-
-
... More
First floor
13.71
-
-
... More
Second floor
13.67
-
-
... More
Terrace Floor
3.89
-
-
... More
Utility Block
-
-
-
... More
Ground floor
1.5
-
-
... More
First floor
1.37
-
-
... More
R.C.C. in Chajja
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
10.25
-
-
... More
First floor
27.47
-
-
... More
Second floor
23.27
-
-
... More
Utility Block
-
-
-
... More
Ground floor
4.77
-
-
... More
First floor
1.44
-
-
... More
R.C.C. in Platform Slab
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
4.69
-
-
... More
First floor
16.51
-
-
... More
Second floor
22.28
-
-
... More
R.C.C. in Fin
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
48.32
-
-
... More
First floor
48.32
-
-
... More
Second floor
48.32
-
-
... More
R.C.C. Wall from PL to Bottom of Roof Slab
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
554.96
-
-
... More
First floor
21.4
-
-
... More
Second floor
18.86
-
-
... More
Terrace Floor
13.46
-
-
... More
DRAIN
-
-
-
... More
Drain top Cover Slab
38.34
-
-
... More
Wall
59.64
-
-
... More
Base Slab
38.34
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Foundation
7819.79
-
-
... More
Ground floor
3359.15
-
-
... More
First floor
1526.41
-
-
... More
Second floor
1369.11
-
-
... More
Terrace Floor
430.69
-
-
... More
Utility Block
-
-
-
... More
Ground floor
154.87
-
-
... More
First floor
68.93
-
-
... More
DRAIN
128.65
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
165.22
-
-
... More
Utility Block
11.94
-
-
... More
ROAD
20.32
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
370.83
-
-
... More
First floor
447.15
-
-
... More
Second floor
386.61
-
-
... More
Terrace floor
128.32
-
-
... More
Utility Block
-
-
-
... More
Ground floor
54.94
-
-
... More
First floor
32.67
-
-
... More
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
13.49
-
-
... More
First floor
14.72
-
-
... More
Second floor
6.87
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Outer side plastering)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
702.88
-
-
... More
First floor
987.8
-
-
... More
Second floor
950.78
-
-
... More
Terrace Floor
988
-
-
... More
Utility Block
-
-
-
... More
Ground floor
348.84
-
-
... More
First floor
155.28
-
-
... More
ROAD
152.85
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
2355.13
-
-
... More
First floor
2295.94
-
-
... More
Second floor
2293.01
-
-
... More
Terrace Floor
574.61
-
-
... More
Utility Block
-
-
-
... More
Ground floor
528.84
-
-
... More
First floor
248.88
-
-
... More
ROAD
81.28
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Inside plastering)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
1708.29
-
-
... More
First floor
1605.58
-
-
... More
Second floor
1592.48
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
2920.07
-
-
... More
First floor
1768.01
-
-
... More
Second floor
1780.23
-
-
... More
Terrace Floor
535.53
-
-
... More
Utility Block
-
-
-
... More
Ground floor
304.77
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. (Outer Side)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
702.88
-
-
... More
First floor
987.8
-
-
... More
Second floor
950.78
-
-
... More
Terrace Floor
988
-
-
... More
Utility Block
-
-
-
... More
Ground floor
1182.45
-
-
... More
First floor
404.16
-
-
... More
ROAD
152.85
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. (In side)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
6983.49
-
-
... More
First floor
5669.53
-
-
... More
Second floor
5665.72
-
-
... More
Terrace Floor
1110.14
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
6983.49
-
-
... More
First floor
5669.53
-
-
... More
Second floor
5665.72
-
-
... More
Terrace floor
1110.14
-
-
... More
Utility Block
-
-
-
... More
Ground floor
833.61
-
-
... More
First floor
248.88
-
-
... More
Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
6983.49
-
-
... More
First floor
5669.53
-
-
... More
Second floor
5665.72
-
-
... More
Terrace floor
1110.14
-
-
... More
Utility Block
-
-
-
... More
Ground floor
833.61
-
-
... More
First floor
248.88
-
-
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
140.58
-
-
... More
First floor
197.56
-
-
... More
Second floor
190.16
-
-
... More
Terrace floor
197.6
-
-
... More
Utility Block
-
-
-
... More
Ground floor
348.84
-
-
... More
First floor
155.28
-
-
... More
ROAD
152.85
-
-
... More
Finishing walls with textured exterior paint of required shade approved make and finishing the surface to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour, labourcess, all T&P etc required for the work complete in all respect as per direction of the Engineer-in-charge:
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
140.58
-
-
... More
First floor
197.56
-
-
... More
Second floor
190.16
-
-
... More
Terrace floor
197.6
-
-
... More
Supplying and fixing of MCM Modified Clay Material- MCM Slate Stone Sunnye 1200 x 600mm of PHOMI make, thickness 2.5mm, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref US patent 8505840 82 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K - EN 12667 (2001), thermal resistance of 0.0568 M2 K/W- EN 12667 (2001) and Fire Insulation - Class A-ASTM E84-15. The product should be patented from United States and Europe and with certifications by IGBC. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and Substrate and per directions of Engineer in-charge. Grouting should be done using filing and pointing method as per instllation drawing provided, and colour of the grout should be as per the architect's specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
421.73
-
-
... More
First floor
592.68
-
-
... More
Second floor
570.47
-
-
... More
Terrace floor
592.8
-
-
... More
Providing Mat finished Granite stone ( Lakha red ) prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
929.18
-
-
... More
First floor
864.44
-
-
... More
Second floor
817.21
-
-
... More
Terrace floor
71.18
-
-
... More
Providing Mat finished Granite stone (Lakha red)prepolished 10mm thick of area above 0.40 Sqm in dado/skirting,riser of steps of approved quality, colour and size in dado/ skirting,riser of steps,wall on 12mm thick bed of cement mortar of mix (1:3) laid in proper plumb and line with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
662.64
-
-
... More
First floor
617.17
-
-
... More
Second floor
390.56
-
-
... More
Terrace floor
69.09
-
-
... More
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
82.21
-
-
... More
First floor
29.67
-
-
... More
Second floor
36.75
-
-
... More
Utility Block
-
-
-
... More
Ground floor
270.75
-
-
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Building Proper
50.32
-
-
... More
Utility Block
17.1
-
-
... More
Supplying,Providing & laying Double charge mat finished vitrified tile (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent) flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
160.92
-
-
... More
First floor
180.69
-
-
... More
Second floor
209.66
-
-
... More
Supplying,Providing & laying Double charge mat finished vitrified tile (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent) flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality in dadoes skirting and landings on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
66.77
-
-
... More
First floor
18.08
-
-
... More
Second floor
77.98
-
-
... More
Supplying, fitting & fixing of Ceramic wall Tile (30x30 cm / 20x20 cm special plain / printed) series tiles (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent) in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials,rubbing, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge . (A/R 2006, Pg-90, item no-17)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
121.8
-
-
... More
First floor
372.73
-
-
... More
Second floor
268.86
-
-
... More
Providing and laying Vitrified germ free floor tiles (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent) of 8-10mm thickness of 600 x 600mm size (thickness to be specified by manufacturer), with water absorption less than 0.06 % and conforming to I.S. 13006 (Min thickness 9mm), breaking strength of min 1400N, with germfree property and resistance to deep abrasion of less than 144mm3 of approved make, in all colors & shade, in flooring & skirting, riser of steps, over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
4.25
-
-
... More
First floor
32.3
-
-
... More
Second floor
28.32
-
-
... More
Providing and laying Vitrified germ free wall tiles (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent of 8-10mm thickness of sizes 600 x 600 mm (thickness to be specified by manufacturer), with water absorption less than 0.06 % and conforming to I.S. 13006 (Min thickness 9mm), breaking strength of min 1400N, with germfree property and resistance to deep abrasion of less than 144mm3 of approved make, in all colors & shade, in flooring & skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
15.12
-
-
... More
First floor
55.08
-
-
... More
Second floor
55.08
-
-
... More
Providing , fitting & fixing of Tactile flooring confirming to IS 4457:2007 of approed size 300mmx300mmx15mm with button profile=10mm+4.5mm, Tac liner profile = 10mm+4.5mm, low water absorption below below 0.5% of approved make (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
42.61
-
-
... More
First floor
27.35
-
-
... More
Second floor
29.47
-
-
... More
ESD Flooring
Providing and laying of Antistatic ESD flooring with coving of 75x75 mm at the junction of floor to wall joint.Preparing the floor by grinding to remove all laitance, dirt, dust on the surface of floor,Treat all construction joints using Epoxy mortar. Seal all cracks and damages on the concrete.Application of Low viscous epoxy primer1260/1290 having resin and hardener, mixed before application. While wet, fix copper tapes maintaining a 3mX3m or 5X5 grid. Note: Spike shoes to be worn during this procedure.A Conductive under coat will be applied and allowed air cure for 24 hours. Apply FloArm Conductive Plus, with specified selected colour to be applied @ 2mm thick over dried primer and allowed to air cure for at least 48 hours before subjecting to use. Note: Spike shoes to be worn during this procedure.Coving to be applied all over the floor to wall joint @ 75 mm to make easy clean, hygienic floor. Add screed before topping as per below,
Application of a moisture barrier screed FloArm Cempo 2 to the thickness of 2mm or an Epoxy screed and allow it air cure for 24 hrs before laying subsequent systems including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. (Make:MYK-Armet/Sika or equivalent)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
276.69
-
-
... More
Second floor
47.54
-
-
... More
Wall Coating
Prepare the dry Plaster/Cementitious putty surface using proper mechanical equipment to remove any loose material, contaminations, and laitance to provide a sound, fine gripping surface. Clean the entire wall area using a powerful industrial vacuum cleaner.Providing and applying a one coat of primer made of FloArm PU1K with 10 % water dilution followed by 2-3 coats of FloArm PU1K Apply FloArm Coat PU1K by a medium nap, lamb’s wool roller or brush depending on the area and the final finish desired. Apply in two coats, each to a wet film thickness of at least 125 microns, with the second coat applied at right angles to the first and after about four hours interval to obtain a cured dry film thickness of approximately 150 microns.Do not apply the first coat onto freshly placed concrete until its moisture content falls below 8%.All the flooring work shall be executed through an approved agency of approved manufacturer and/or Engineer in Charge.(Make:MYK-ARMET/SIKA or equivalent)
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
540.24
-
-
... More
Second floor
135.72
-
-
... More
Providing & making Coving 75mm x 75mm / 50mmx 50 mm- with epoxy mortar (prepared with epoxy and quartz sand) in ratio of 1: 5. It should be followed by finishing with two coats of epoxy coating FloArm coat EC applied over prepared surface by applying primer FloArm Primer 1260/1290 & epoxy putty with FloArm Coat EC material all MYK Arment make as per the manufacturer’s instructions. Coving wall to ceiling/ Coving floor to wall/ Coving wall to wall . The coving is to be done in all intersections of wall and floor joint including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
450.64
-
-
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON /VARMORA / OASIS / SOMANY/ KAJARIA or equivalent ) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground floor
426.99
-
-
... More
First floor
205.2
-
-
... More
Second floor
205.2
-
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
First floor
124.56
-
-
... More
Second floor
1768.04
-
-
... More
Terrace Floor
108.12
-
-
... More
Utility Block
-
-
-
... More
Ground floor
300
-
-
... More
Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials,Conveyance, labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
2000.72
-
-
... More
Providing and applying two coats of high SRI heat reflective coating/albedo paints/cool roof/Ambi cool on roof surface.Application of a single coat of water based primer all over the roof surface followed with application of two-three coats of high SRI coatings of value 108 and above as per the instruction of engineer in charge.Final surface after the application should be dust and water repellent. This cost includes all materials, labour, T&P, transportation, taxes complete in all respect. ( Make: PBS /LERON CHEMICAL/ JM Coatings).
-
-
-
... More
Building Proper
2000.72
-
-
... More
Supply and installation of 1.2 mm thick MYK POWER PRUFE 800 below grade pre-applied integrally bonded waterproofing sheet membrane composed of 0.7 mm thick HDPE backing layer and a trafficable weather resistant protective granular layer realizing a firm bonding to poured concrete to prevent water ingress applied on prepared sub base and shoring prior to casting of concrete. The membrane is loosely-laid with the adhesive side facing upwards and removing the selvedge release film at the pre-manufactured overlap areas and is firmly pressed to ensure firm bonding. Seal roll end laps and non selvage joints with a special tape strip powerpruf then firmly Duct Tape a double side adhesive tape to stuck on the overlap removing granules and pressing it thoroughly by roller to release entrapped air if any. The product complies to a tensile strength of 800N, elongation of 400% and peeling strength from concrete 2.5N/mm. The rate is inclusive of all adhesives, sealants, tapes for overlap areas, labour and all jointing material with necessary tools and equipment’s for carrying out the work with cost, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge.
-
-
-
... More
Building Proper
2886.75
-
-
... More
Raft Slab & RCC wall Construction Joint Treatment:
Supply and installation of SealArm waterbar RS 800 on stater joint and construction joints horizontally & vertically with adhesive ). It’s a ReSwellable Hydrophilic Water bar & SealArm Waterbar RS 800 is a well-developed joining strip which is very economic and safe to use, compared to usual joint sealing methods. The necessary construction joints can be worked out frictionally and pressure water tight up to 3 bars. The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC. (Swelling Capasity: 800 % by volume expansion in 14 Days.)
-
-
-
... More
Building Proper
139.66
-
-
... More
Supply and installation of 1.5 mm thick MYK Self Stick 3000 post-applied Self-adhesive Membrane with HDPE liner onto prepared and primed(MYK Tarmat SB 200) retaining wall surface with a side overlap of 75mm and end overlap of 100mm as per specification. All membrane to be terminated at least 300mm above ground level by preparing a groove and terminate the membrane inside the groove and seal the groove with polymer modified mortar with cost, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge.
-
-
-
... More
Building Proper
870.25
-
-
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
113.4
-
-
... More
First Floor
113.4
-
-
... More
Second Floor
170.1
-
-
... More
Utility Block
-
-
-
... More
Ground Floor
1067.69
-
-
... More
First Floor
43.2
-
-
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
8.51
-
-
... More
First Floor
8.51
-
-
... More
Second Floor
12.76
-
-
... More
Utility Block
-
-
-
... More
Ground Floor
11.16
-
-
... More
First Floor
0.72
-
-
... More
Providing & fixing of NCL / Guardian Glass / Saint Gobain or Equivalent Dura Door
Frame: Shutter is hung on Factory made door frame of 48 mm thickness made of Cement bonded Particle Board (Bison Panel) and Composite board for water resistant property with wall thickness of 200mm. The frame is laminated with 0.2mm thick water proof and scratch resistant PVC Foil using hot press and high grade PUR adhesive and is fitted with casing wick (rubber beading) for energy,dust and sound efficiency. The frame is affixed to the wall using highstrength expandable PU Foam using tension rods for precision and optional anchor bolts, side and top of frame attached together using dowel screws and quick acting adhesives.
Shutter: Factory made 42 mm thick shutter sandwiched with laminated Cement Bonded Particle Board (Bison Panel) 6 mm thick skins on both sides. Skeleton is made with Composite Board & Cement Bonded Particle Board (Bison Panel) of 30mm thickness (sides). Rails may be substituted with HDHMR (High Density High Moisture Resistant) board. Core of high density/uniform load distribution featured Honey Comb and Laminated Veneer Lumber (LVL) for holding the lock body and hardware, laminated with 0.2mm thick water proof and scratch resistant PVC Foil and edge-banded with 1mm thick PVC edge-band using hot press and high grade PUR adhesives. Accessories included are SS ball bearing hinges, SS lever lock, SS tower bolt, SS door stopper , SS D-handle, Hydraulic door clousure, vision panel etc.
Architrave: Factory made Architrave fitted to pre-made grooves within the frame for added aesthetics. Plain design Architrave is made of Bison panel. Architrave is laminated with 0.2mm thick water proof and seratch resistant PVC Foil using hot press and high grade PUR adhesive, fitted to the wall using strong quick acting adhesives. Standard sizes in mm for Plain Architrave: 80 or 60 mm (width) x 12 mm (thickness)
-
-
-
... More
Building Proper
248.52
-
-
... More
Providing, fitting and fixing of Wooden Lead Lined doors as per guidlines of AERB/DRS for radiation Control Farme.Farme Section shall be 120 x 70 mm of Hardwood ( Red Mirandi ), with specially designed and sandvitched with minimum 2 MM Lead Line. Farme to have single Rebate to recive the Lead Line Shutter, Frame shall be finshed to recive paint/polish as per the ashthetic demand of the project , without harming it's orignal properties, a confirmation from manufacture is required before going for any beautification. Shutter Shall be 45mm Thick, having special design consisting the 2 MM- minmum 99% pure Lead Line sandwitched in between the shutter, Core Construction shall be 6mm Ply with 2mm Lead backed by 35mm Board and outer skin to be Laminated both side 1mm each. In all doors, shutter shall be constructed in a manner so that with the permisible gap between frame jamb & door leaf , Leakge should be in permisible limit as per AERB/DRS. In case vision lite is required it shall be only Lead Glass as recomomnded by AERB/DRC including fixtures SS Ball Bearing Hinges of size 100 x 89 x 3.5mm complete with wooden Screws, Mortise Dead Lock, SS D Type Pull Handle back to back of size 300mm long, Heavy Duty Door closers, Tower Bolt, HRD anchor fastners of FISHER, cost, conveyance, cost of all Labour, Labour cess , T&P etc. complete in all respect as directed by the Engineer-in-charge. (2 MM Lead Lined Radion Control Wooden Door)
-
-
-
... More
Building Proper
4.8
-
-
... More
Supply, Installation, testing & commissioning of 120 minutes of metal fire rated doors (Saint Gobain/Unistar/ Doorwin/Mediunited or equivallent ) with vision panel 400 X 900 mm having 11mm thick contraflame doorlite as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved in CBRI for maximum rating of 2hrs. Produced from 1.6 MM thick galvanized steel sheet formed to double rebate profile of size 105 x 60mm & 143mm X 57mm (+/- 0.3mm) with a maximum bending radius of 1.4mm. The door frames may be built into the brick or block walls using corrugated “ T ” Anchors not welded to the frame (first fix). Frames may also be fixed on plastered openings with the help of Metallic Expansion Shield with counter sunk screw (second fix). Door Frames are supplied to knock-down form with butt joints for bolted assembly at site. Constructed from 1.20mm thick galvanized steel sheet formed to provide a 45mm thick fully flush, double skin door shell with lock seam joints at stile edges. Internal Reinforcements are provided at top, Bottom and Stile Edges for Fire Rating. The internal construction of the door is a specially designed Honey Comb structure with reinforcements at top, bottom and stile surrounds.
-
-
-
... More
The internal construction of the door varies with the degree of Fire Rating as tested. For doors having overall height in the excess of 2300mm the shutters shall essentially have double latching. The door frames and door shutters are primed with Epoxy Zinc-Phosphate with thermosetting and finished with Polyurethane paint. Fire rated stainless Steel Ball Bearing Butt Hinges 3mm thick are fixed flush to the frame & shutter. Fire rated stainless Steel Ball Bearing Butt Hinges 3mm thick are fixed flush to the frame & shutter. Fire rated Mortise Sash Lock with Lever Handles/Panic devices , Panic Trim, Mortise Dead Bolt, Mortise Latch etc can be provided as required. Concealed extended lever action flush bolts provided on the top of the door to the leading stile edge including cost of all materials, all labour sundries etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
126.36
-
-
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Nanair/Unistar/Doorwin/mediunited or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm.
-
-
-
... More
For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:
4 nos Hinges on each leaf
1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock
1 Set D-type pull handle back to back on each leaf
1 no Concealed flush bolt in inactive leaf of Double door, if any
1 no vision glass on each leaf
Fastners as required.
The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.
-
-
-
... More
Building Proper
126.06
-
-
... More
Three track three panels sliding window with Double Glazed Unit
Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window with DGU upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass (Make:- Gaurdian Glass, Saint Gobain or equivalent) Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick soft coated reflective toughened glass outer side with 12mm thick air gap and 6mm thick clear toughened glass inner side of Saint Gobain SKN 444 II or equivallent and colour, including cost of all materials, all labour sundries etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge. ( Make: UPVC NCL VEKA LTD./ FENESTA / KOMMERLING or equivallent)
-
-
-
... More
Building Proper
70.2
-
-
... More
Three track three panels sliding window with Single Glazed Unit
Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window with SGU upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass (Make:- Gaurdian Glass, Saint Gobain or equivalent) Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick soft coated reflective toughened glass of approved quality and colour of St Gobain,including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge. Make: UPVC NCL VEKA LTD./ FENESTA / KOMMERLING equivallent)
-
-
-
... More
Building Proper
45.9
-
-
... More
Two track two panels sliding window with Double Glazed Unit
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles of approved make with a GREENLINE / Guardian Glass / Saint Gobain or Equivalent mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass outer side with 10mm thick air gap and 5mm thick clear toughened glass inner side of Saint Gobain SKN 444 or equivalent . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
4.5
-
-
... More
Two track two panels sliding window with Single Glazed Unit
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles of approved make with a GREENLINE / Guardian Glass / Saint Gobain/ Equivalent mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass ST 450 of Saint Gobain or equivalent. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/ GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
42.75
-
-
... More
Providing and fixing factory made uPVC white colour Partly fixed cum partly sliding window having following dimension for fixed portion & Slidinding portion:
Fixed portion: UPVC frame having section 58mm width X 50mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 5mm thick clear toughened glass of approved quality etc all complete as per direction of EIC.
-
-
-
... More
2-Track sliding: uPVC multi-chambered frame having section 58mm Width x 49mm Height, Glass Sash: 37mm Width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 5mm thick toughened Frosted glass of St Gobainof approved quality, with cost conveyance of all materials, all labour, sundries T&P etc complete in all respect as per approved drawing & direction of Engineer-in-Charge.Make: UPVC FENESTA / TORFENSTER / KOMMERLING or equivallent)
-
-
-
... More
Building Proper
18.9
-
-
... More
Providing and fixing factory made uPVC white colour louvered ventilator upto 1.5m in height comprising of uPVC multi-chambered frame having section 58mm width X 50mm Height , Glass Sash: 37mm depth x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 4mm thick pin headed glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Make: UPVC FENESTA / TORFENSTER / KOMMERLING or equivallent)
-
-
-
... More
Building Proper
20.7
-
-
... More
Supplying fitting fixing Aluminum Sun Louvers 84R system comprises of 84 mm wide and 16 mm deep roll formed out of aluminum coils. In Aluminum, Panels are made of 0.5mm thick aluminum alloy 3105/3005 and Carriers are made of 0.9mm thick aluminum alloy with cut-outs to hold panels. Aluminum panel and carrier shall be polyester powder coated with 60-70 microns. Sun louver system is a vertical or horizontal wall sun shading system. The system use 84 R panels that snap into vertically mounted frames. The frames can be mounted on the exterior of a building over window openings, along balconies or over open area on a building elevation. The vertical/horizontal frames are offered in two different designs that hold the panels at different angles of 35 and 45 degrees. The ranges of angles provide air flow, sun shading, safety from rainfall and desired visibility with cost conveyance of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge . ( make: HI-STEEL / ALUWOOD or equivalent )
-
-
-
... More
Building Proper
509
-
-
... More
Supplying, Installation, testing & commissioning of GFRC ( Glass Fibre Reinforced Concrete ) Screen/Jali of approved make of thickness 25 mm ±5 mm with border thickness of 50 ±10mm pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate frame work, using fasteners, and necessary hardware etc. in Building Façade. The element shall be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'OC' or equivalent, Super plasticisers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ 'Reckli' or equivalent complete including cost, conveyance, of all materials, labour, transportation charges etc complete in all respect as per specification and direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
60
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
8577.87
-
-
... More
Supply and Installation of false ceiling 8 mm thick Tufbloc magnesium oxide HDFR boards ( Make: ANUTONE TUFBLOC or equivalent) of size 1200 x 1200 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone / Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers.
-
-
-
... More
Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework with coist, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge. Test certificate of the use products shall be submitted after procurement of materials.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
1111.14
-
-
... More
First Floor
1157.54
-
-
... More
Second Floor
1125.45
-
-
... More
Supplying and fixing of MCM Modified Clay Material ‐ MCM Travertine(make: - PHOMI/ VANJOIN or equivellent) 1200 x 600mm of PHOMI make, thickness 2.5mm, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.
The product should be patented from United States and Europe and with certifications by IGBC. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
... More
Building Proper
146.93
-
-
... More
Suppling & applying of sikadur combiplex SG (200X2mm) of sika product for joint & crack of expansion joints with sikadur-31C epoxy adhesive & Aluminium sheeting on top, over a cleaned, free from oil, grease surface including cost of all charges etc all complete. (Expansion joint)
-
-
-
... More
Building Proper
131.45
-
-
... More
DRY WALL PARTITION Supply and Installation of 70 mm thick magnesium oxide board drywall Tufbloc partition system ( Make: ANUTONE TUFBLOC or equivalent) having (high water & fire resistance) which includes two layers of tufbloc magnesia square board having square edge & size 2400 X 1200 x 10 mm to be fixed on the either side of the GI stud channel framework in horizontal position of length side board. The frame work includes Floor / Head ( FC 50 ) channels having thickness 0.06 mm length 3600 mm ,equal flanges of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm centres staggered noise & fire rated silicon sealant to caulked along the perimeter of the partition frame before fixing channels.The stud channels SC 48 having thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm should be placed into the floor / head channels positioned vertically at 600 mm centres. Horizontal intermediate channel at 1200 mm centres to locked with the vertical studs. Extra reinforcement to be provided at openings ( doors& Window ). Apply Synthetic poly fiber 10 x 25 is 50 mm width,600/1200 mm density 1000 gsm filled between the studs & held in position by using chicken mesh wire / pasting on the board.
-
-
-
... More
Boarding is to done on each side of studs framework in a staggered pattern by the help of self drilling screw at 300 mm centers. After boarding of two boards jointing & finishing is to be done by joint compound. The flush look will appear after sanding the two boards joint properly to get a smooth look . The technical parameters of the boards - Density- 1000 kg / mt cube weight 10 kg/ mtsq , Fire -150 min acoustic STC - 50 db, climate OCRH - 50 ,99 Termite resistance - yes, Moister absorbent - 6.8% after 2 hr, wet expansion less than -0.02% from ambient to saturation ,Moister Movement - 0.02% Green - RC % - 30 Strength - Anti sag. Test reports of manufactures are to submitted at the time of delivering of materials. The semi glazed partition will be erected with 8 mm tk float glass glazing ( partly frusted) at various positions complete with melamine polished Teak Wood beading . The rates includes all materials, labour, transportation T&P etc complete as per direction of EIC.
-
-
-
... More
Building Proper
35.11
-
-
... More
Providing and Fixing NCL Seccolor or equivalent Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass(Guardian Glass/ Saint Gobain or equivalent) holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & scre to be fixed with 6mm thick Toughened reflective glass. (Single Glazed Structural glazing ).The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC.
-
-
-
... More
Building Proper
148.52
-
-
... More
TORO SC (Conductive flooring for OT, ICU, Cath lab, Etc)
Providing and installation of iQ TORO SC Vinyl Sheet Flooring manufactured by Tarkett with a nominal thickness of 2mm as per ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN 426. iQ TORO SC shall conform to requirement of ISO 10581 - EN 649. iQ TORO SC shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 Ω as per EN 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
The flooring should be laid on a smooth, clean sub floor which shall be prepared by self-levelling compound (Make: KERATECH ECO or equivalent) with primer (Make: A Eco or equivalent) which will perform correction of irregularities, un-even substrate, develops high levels of resistance to the solvent action of water, recyclable as an inert material, very low volatile organic compound emission etc.
-
-
-
... More
OT
-
-
-
... More
Ground Floor
125.24
-
-
... More
First Floor
48.66
-
-
... More
Second Floor
192.07
-
-
... More
Providing and installation of Homogenous Vinyl Sheet for wall with a total thickness of 1.3 mm as per ISO 24346 - EN 428, width of 2m as per ISO 24341 - EN 426, weight of 2.100 g/m2 as per EN ISO 23997.. The wear surface shall be PUR reinforced. It shall conform to requirement of wetroom as per GBR class VT. It shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. he product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684
-
-
-
... More
OT
-
-
-
... More
Ground Floor
251.85
-
-
... More
First Floor
86.43
-
-
... More
Second Floor
124.72
-
-
... More
MODULAR MONOBLOCK CEILING PANELS
Supply, fitting & fixing of Modular Monoblock Ceiling Panel ( inside the OT) of approved make with GP/SP Sheet of thickness 0.8 mm. The Back Sheet should be factory powder coated to prevent it from rusting. The Ceiling Panel shall be injected with Poly Urethane Foam (PUF) with a minimum density of 40 Kg/m3. The Ceiling Panel shall be sealed with Aluminum Extrusion to make the structure rigid. The Total Thickness of the Ceiling Panel shall be 50 mm. The Corner Panels for the Operation Theatre shall be made up of be made of GP/SP Sheet of thickness 0.8 mm (Front Side) and PPGI Sheet of thickness 0.8 mm (Back Side). The Back Sheet should be factory powder coated to prevent it from rusting. The Corner Panels should be factory fitted with Ducting and Return Grill Cutouts for easy connection. The Sheet shall be from any reputed make such as (TATA/JINDAL/SAIL) with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. Make:-United/Altos
-
-
-
... More
OT
31.4
-
-
... More
Painting with Anti-Fungal hygiene paint with approved quality which prevents the growth of mould, bacteria and yeasts for at least 5 years. The unparalleled durability of hygiene coatings helps to extend the maintenance cycle and to minimize all related material, labour and shut down costs. It shall have highly resistant to abrasives, detergents and weak acids and alkalis used in cleaning regimes & can be regularly steam cleaned without any loss wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.Make:- SKK,Shika Guard
-
-
-
... More
OT
31.4
-
-
... More
TWO BAY SCRUB SINK Supply, Installation, Testing & commissioning of 1600mm length made up of 304grade stainless steel sheet of 1.2mm thk Scrub sink for each operation theatre should have been designed to ensure that surgeons and staff can undergo a thorough aseptic scrub. Each fixture should be fabricated from heavy gauge, type 304, stainless steel and is seamless welded construction polished to a satin finish. Hands free operation includes infrared sensor with a built-in range of adjustment. User definable settings of Time Selection are available. A thermostatically controlled mixing valve automatically maintains water. It should have a foot operated facility. The unit shall be foot operated and with automation. The scrub sink shall be provided with front access panel which is easily removed for access to water control valves, waste connections, SS pipes, mixing valve and with infrared sensor etc, Make:-United/Altos
-
-
-
... More
OT
1
-
-
... More
Supply, fitting , fixing of Magnetic white laminated writing Board of over all size 970 x 670 x 58 mm and board size 940 x 640 x 50mm flush mounted with OT wall panel with germ free rubber gasket at edges complete in all respecte as per direction of EIC . (Make: United Industries/Unitech)
-
-
-
... More
OT
1
-
-
... More
STORAGE UNIT
Supply and Installation of Stainless steel storage unit for each OT shall have a Storage cabinet of dimension 2100 x 900 x 600 (HxWxD) mm which should increase up to 700mm depending upon availability of space. The storage cabinet shall be made of SS specification, same as used for wall panel, with sheet 1.25 mm minimum. The door panels of the cabinet shall be in Stainless steel & partly in tempered glass. The storage Cabinet should have 4 trays including all hardware, fitting, fixtures etc all complete as per direction of EIC.Make:-United/Altos/ equivalent
-
-
-
... More
OT
1
-
-
... More
Loosening, Leveling & Compacting original ground supporting embankment to faciliate placement of first layer of embankment, scarified to a depth 150mm, mixed with water at OMC and then compacted by rolling so as to achive minimum dry dencity as given in Table 300-2 for embankment construction. (A/R 2006, Pg-158, item no 37)
-
-
-
... More
ROAD
946.15
-
-
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
ROAD
262.82
-
-
... More
Providing and fixing of UniStone / JINDAL MAKE glass reinforced concrete (G.R.C) exterior paving tiles in 'Cobblestone' finish in approved shade in sizes of 152mm x 152mm. The thickness of the tiles should range between 20 to 22 mm, allowing variance of ± 5mm in accordance with IS: 1237-1980. The tiles should be made with M40 Grade concrete mix design having ’43’ grade Portland cement, reinforced with Alkali Resistant glass fiber and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by ‘BAYFERROX (Germany)’ or equivalent with high vibration technology. The pigmentation should be homogeneous and in accordance with British standard BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proofers agents and others. The tiles should be produced with high vibratory technology and their concrete mix design compressive strength should be of M-40 grade@28days. The top surface of the tiles should be treated with acrylic lacquer resulting in top surface water absorption of less than 1% and water absorption of less than 8% by 24 hours immersion method. The beds where tiles are to be laid should be clean, debris free, wet and mopped. The tiles should be laid to 1:4:8 PCC Concreting with cement mortar of 20mm thickness made with (1:3) Cement : Coarse Sand, adequate grooves should be maintained between 8-10mm using spacers and pointing work to be done with 1:3 ( Cement : Fine Sand) mix as per direction of EIC.
-
-
-
... More
ROAD
3504.26
-
-
... More
E.I. WORK
Sub-Head I (modular Wiring Items)
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit(Norpack/Eq make) FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/ Hager(Insysta)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
298
-
-
... More
GROUP-B
218
-
-
... More
GROUP-C
280
-
-
... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit(Norpack/Eq make) FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type( flame retradant type)switch ISI marked Make-Schneider(Zencelo)/ legrand( Arteor) /Panasonic (vision)/Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider (Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
152
-
-
... More
Recessed wirring in existing false ceiling to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia steel conduit(Norpack/Eq make) ISI mark metallic conduit ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (falme retradant type) switch ISI marked Make-Schneider(Zencelo)/ legrand( myrius) /Panasonic (vision)/Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (vision)/Hager(Insysta)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
160
-
-
... More
GROUP-B
80
-
-
... More
GROUP-C
65
-
-
... More
Group control of point in existing false ceiling wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved as approved with 20 mm dia steel conduit ISI mark metallic conduit(Norpack/Eq make) ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type( flame retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) /Hager(Insysta)or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
40
-
-
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
138
-
-
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( falme retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision/Hager(Insysta)) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
240
-
-
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( flame retradant type))) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta)/ or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
120
-
-
... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( flame retradant type)) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager(Insysta)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
36
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE/KEI) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
544
-
-
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
2000
-
-
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
3081
-
-
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
488
-
-
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD) (4X4+2X2.5)
200
-
-
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
100
-
-
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)
88
-
-
... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)
188
-
-
... More
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB power) (4X16+2X10)
400
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic/Hager or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
15
-
-
... More
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic/Hager equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
6
-
-
... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider /Hager or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
... More
4 moudle(125mmx75mm)
18
-
-
... More
1 moudle(75mmx75mm)
14
-
-
... More
12 moudle(200mmx150mm)
6
-
-
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved
-
-
-
... More
20 MM
88
-
-
... More
25 MM
88
-
-
... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic /Hager/ make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
14
-
-
... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic /Hager/make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
15
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic /Hager/ make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
-
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic /Hager or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
25
-
-
... More
Supplying,fixing of Blanking plate(modular type)( (anti bactorial & falme retradant type)) in existing switch box(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)/Hager/, complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
100
-
-
... More
Sub-Head II (Light fitting Fixture & Fan) (Make-Equievalant higher model with 5 star rated of Havells/Panasonic/Bajaj/Philips/Wipro/Halonix/Usha/jaquar or equievalant reputed make & model A catagory ISI marked as approved )
-
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
36
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers , exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
22
-
-
... More
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years.
40
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)
120
-
-
... More
Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet Aluminium housing of 595 X 595 mm x 70 mm size with of not more than 32W and system lumens output not less than 3250 lumens (120 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/ LT/Trilux /Philips/Wipro/jaquar /Bajaj/Halonix/ or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.
150
-
-
... More
Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, Top opening clean room LED luminaire of 600 X 600 x 65 mm size with of 45 W and system lumens output not less than 4500 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 3 KV internal urge protection, L70 :50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make:Panasonic /PHILIPS/ /wipro/jaquar.Bajaj/Halonix or equievalant reputed make & model A catagory ISI marked as approved ) .The luminaire should be Replacement Warranty will be 5 years. .Each CLEAN ROOM FITTING FOR OT ICU BUNKAR ,CT SIMULATOR.
42
-
-
... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 50000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Trilux/Osram/PHILIPS/Wipro/jaquar/Bajaj/Halonix or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years
155
-
-
... More
Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 120 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Bajaj/Halonix/Wipro/PHILIPS/Jaquar or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years.
266
-
-
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. Panasonic/Bajaj/Halonix//PHILIPS/LT/wipro/jaquar or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years .
180
-
-
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-NE or similar model of PHILIPS/Panasonic /jaquar or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
50
-
-
... More
SITC of IP 20 Non-integral flexible LED strip light,High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic /Bajaj/Halonix/PHILIPS/Wipro/jaquar or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
3
-
-
... More
Supplying and fixing of small focus light for small monuments as 30W , 5700 K required as per direction of Engg.-in-Charge Make : Panasonic/Bajaj/Halonix/ /PHILIPS/LT/WIPRO/jaquar or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
8
-
-
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
200
-
-
... More
SITC of energy efficient occupancy sensor having power rating not more than 10 watt and all other accessories connection etc as required as per direction of Engg.-in-Charge. ( WIPRO Bajaj/Halonix//PHILIPS/Panasonic/jaquar or equievalant reputed make & model A catagory ISI marked as approved. The luminaire should be Replacement Warranty will be 5 years
8
-
-
... More
Supplying and fixing of High bay light for double height as 80W , 6700 K required as per direction of Engg.-in-Charge Make : Panasonic /Bajaj/Halonix//PHILIPS/LT/WIPRO/jaquar or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
8
-
-
... More
Supplying, installation, testing and commssioning of 400 mm sweep white/milky colour wall fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha /Bajaj/Halonix/jaquaror equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)
10
-
-
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS: Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Hager(novello+) or equievalant reputed make& model A catagory ISI marked as approved.
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. The Distribution boards should be Replacement Warranty will be 5 years
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.
17
-
-
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
17
-
-
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
10
-
-
... More
8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
17
-
-
... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
4
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB .with the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
455
-
-
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA . in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years
17
-
-
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA, in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
8
-
-
... More
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA , in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
8
-
-
... More
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA, in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years
4
-
-
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA , in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years
17
-
-
... More
(Earthing) INSTALLATION
-
-
-
... More
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years(04 nos for main panel & equipement ,04 nos for DG SET )
8
-
-
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
10
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
400
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
21
-
-
... More
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
20
-
-
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
2
-
-
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex/RR cable/KEI/ or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3.5core x 300 sq mm ( TO MAIN PANEL TRIPPLE /FOUR RUN/DG SET TO MAIN PANEL TRIPPLE RUN )
299
-
-
... More
3.5core x 185 sq mm (MAIN PANEL UPS MAIN INCOMMER OF 100KVA UPS PANEL,LINAC & CT SIMULATOR,HVAC PANEL 02 RUNS,BBT TO POWER PANEL FLOOR)
265
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex/RR cable/KEI or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB PANEL)
43
-
-
... More
4 core x 4 sq mm (for small power)
100
-
-
... More
3.5core x 35 sq mm (To power BDB/UPS PANEL)
32
-
-
... More
3.5core x 95 sq mm ( FOR LAUNDRY,OT )
32
-
-
... More
3.5core x 70 sq mm ( FOR LIGHT/ICU PANEL/EQUP. PANEL)
15
-
-
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
40
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
40
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
200
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
66
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
85
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
75
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
69
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
98
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
45
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
68
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x300 sq mm
14
-
-
... More
3.5 core x185 sq mm
12
-
-
... More
4 core x16sq mm
14
-
-
... More
3.5 core x35 sq mm
14
-
-
... More
3.5 core x70 sq mm
10
-
-
... More
3.5 core x95 sq mm
10
-
-
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
15
-
-
... More
80 mm dia
15
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
200 mm dia
221
-
-
... More
PANELS : (make-Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1/Hager(equivalent make)) or equievalant make with proper model) ISI marked)
-
-
-
... More
FLOOR PANEL AT EACH FLOOR FOR (1F-01,2F-01,3F-01) RAW POWER
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01 number of 250(160-200) Amps TPN MCCB with ROM 36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 300Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 63A 4P MCB 08 NOS FOR POWER BDB( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant make with proper model)/Hager(equivalent model) ISI marked)or laundry washing machine motor.
Out going- (ii) 04 nos 32A 4P MCB LIGHT BDB AC IDU BDB/LIGHT BDB(ABB/L&T/Legrand/Schneider make or equievalant make & model)or laundry washing machine motor.
Out going- (iii) 01 nos 100A 3P MCCB with ROM,Ics=100% Icu & adjustable thermal magnetic release,25kA FOR RAW POWER.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-200Amps Ameter & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 01 set of 0-500 voltmeter.(DIGITAL)(Sicure/L&T or equievalant make & model)
2
-
-
... More
FLOOR PANEL AT EACH FLOOR FOR (1F-01,2F-01,3F-01) (LIGHT PANEL EACH BLOCK)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 number of 125 (80-100)Amps TPN MCCB with ROM ,36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 150Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i)40A 4P MCB 10kA,C series 02 NOS FOR EM. POWER BDB.
Out going- (ii) 08 nos 32A 4P MCB 10kA,C series POWER BDB AC IDU /LIGHT BDB.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ameter & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 01 set of 0-500 voltmeter switch.(DIGITAL)(Sicure/L&T or equievalant make & model).
2
-
-
... More
MAIN UPS PANEL (100) KVA 2 NOS ON LINE UPS 3PH-3PH)AT GF control room FOT OT/ICU AREA
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR OT/ICU ALL LOAD)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01- 03 number of 250A 4P TYPE,MCCB with ROM 36kA adjustable Thermal Magnetic Release with Ics=100% Icu (make- Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1) or equievalant make with proper model) ISI marked))with shunt trip.with axulary for BMS .With axulary for BMS.(From 100 KVA UPS)(Provission for EM. Connection of UPS parallel to system.
BUS COUPLER - 02 number of 250A 4P TYPE,MCCB with ROM 36kA adjustable Thermal Magnetic Release with Ics=100% Icu (make- Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1) or equievalant make with proper model) ISI marked)with shunt trip.with axulary for BMS .With axulary for BMS.
Busbar-1- 03 numbers of 01 SETS 300Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
OUTGOING - 02 number of 250A 4P TYPE,MCCB with ROM 36kA adjustable Thermal Magnetic Release with Ics=100% Icu with shunt trip.with axulary for BMS .With axulary for BMS (For 02 nos emergency busduct of zone 1 & 2).
1
-
-
... More
Out going-1- (i) 04 numbers of 160A,36kA 4P MCCB with ROM ,adjustable Thermal Magnetic Release with Ics=100% Icu (make- Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE) or equievalant make with proper model) ISI marked)with shunt trip.with axulary for BMS) For OT /ICU/TEST room panel/blood bank power.
Out going-2- (i) 6 nos 32A TPN MCB,10kA,C series for OT ,ICU Lighting with anathesia/blood bank lighting,BDB UPS of each floor(02 nos each).
Out going-3- (i) 04 nos 40A TPN MCB 10kA,C series for OT ,ICU Lighting with anathesia/blood bank lighting..(Legrand/Schneider/L&T/ABB make or equievalant make & model).
Instrument- (i) 09 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 03 sets of MFM with RS485 & CTs.(Sicure/L&T,CT-KAPPA or equievalant make & model).
iii) 04 nos 40kA SP VSD(TYPE-2) with 32A SP MCB.
NB- This panel should have proper earth by suitable rated copper flat.
-
-
-
... More
MAIN AC PANEL FOR OUTDOOR UNIT OF Hospital at roof top(FOR ODU OF VRF)
-
-
-
... More
S/I/T&Commissioning of LT OUTDOOR mounted on roof top area with IP-65 PROTECTION floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 number of 400A 3P MCCB, with ROM 36kA adjustable Thermal Magnetic Release with Ics=100% Icu with under voltage,over voltage ,current,earth fault protection with shunt trip.with axulary for BMS).
Busbar- 04 numbers of 500Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P RCCB,100MA 4 NOS FOR OUT DOOR UNIT UPTO 30 KW.
Out going- (i) 100A 4P RCCB,100mA 4 NOS FOR OUT DOOR UNIT UPTO 45 KW.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 04 nos of 70kA SP VSD(TYPE-2) WITH 32A SP MCB.
1
-
-
... More
OT/ICU /EMERGENCY PANEL(1F-01)(UPS) OR RAW POWER
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 numbers of 160 Amps 4P MCCB with ROM ,36kA with ROM (make- Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1) or equievalant make with proper model) ISI marked)(Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
Busbar- 04 numbers of 200Amps,50kA Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 32A 4P MCB 10kA,C series UPS Light load for each floor.
Out going- 04 nos 63A 4P MCB 10kA,C series OT/ICU POWER/OT MACHINE OR Bed head panel.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-200Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make & model)
NB- This panel should have proper earth by suitable rated copper flat.
1
-
-
... More
FOR EMERGENCY LIGHT/POWER LOAD OF FLOOR(2F-01,1F-01)(UPS)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 no 40A 4P MCB 10kA,C series with on/off trip indication UPS Light load for each floor.
Busbar- 04 numbers of 63Amps,50kA Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 25A 2P MCB 10kA,C series UPS Light load for each area UBDB. ( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant make with proper model ISI marked).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make & model).
NB- This panel should have proper earth by suitable rated copper flat.
2
-
-
... More
MAIN CONTROL PANEL AT GF
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-1- 02 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) / ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B) Legrand(Equievalant model)/Hager(HW),or equievalant make with proper model ISI marked) (WITH AXULARY FOR BMS) (WITH AXULARY FOR BMS)(500 KVA TRANSFORMER,620 KVA TRANSFORMER)
1
-
-
... More
In commer-2- 02 number of 4p 800A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG(make-Equievalant model of Schneider (NW 6.0) / ABB (E max PR 121)/L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B) Legrand(Equievalant model)//Hager(HW), or equievalant make with proper model ISI marked) (WITH AXULARY FOR BMS) (500 KVA DG 02 NO).
BUS COUPLER- 01 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) / ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B) Legrand(Equievalant model)//Hager(HW),or equievalant make with proper model ISI marked) (WITH AXULARY FOR BMS) (WITH AXULARY FOR BMS)(2 NOS DG & 2 NOS TRANSFORMER INTEGRATED))
-
-
-
... More
Busbar-1&2 04 numbers of 1500Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing).
Out going- 02 numberof 630A 4P MCCB with ROM 36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. (make-Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1)/Hager(Equivalent model) or equievalant make with proper model) ISI marked)with shunt trip.with axulary for BMS (HVAC,BUS BAR TRUNKING POWER ).
Out going- 05 numbers of 400A 4P MCCB with ROM 36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. (make- Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1)/Hager(equivalent model) or equievalant make with proper model) ISI marked)with shunt trip.with axulary for BMS (HVAC & LINAC,CITI SIMULATOR,BUS BAR TRUNKING LIGHT,SPARE).
Out going- 08 numbers of 63A 4P MCB(timer panel & water supply management,equipement & chiller pump)
-
-
-
... More
Out going- 6 numbers of 250A 4P with ROM 36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. with shunt trip.with axulary for BMS (SPARE ,ups,MRI).
Out going- 6 numbers of 125A 4P Icu=10%Ics, encapsulated roto operative double breaktype, LSIG MCCB with micro processor based release with adjustable overload from 36%-100% ,Comminucation module , ibuilt current,voltage & energy metering,ZSI & Electrical locking for normal & DG(Brassi thoraphy,EEG,Floor light ,spare).
Out going- 6 numbers of 32A 4P MCB (LIGHT SUPPLY).
Instrument- (i) 24 SETs phase indicating lamp with toggle switch & HRC fuse.
(ii) 05 set of digital type multifunction meter with CT for voltage, current, frequency, PF, THD indication with RS 485 COMPACTIVITY FOR bms data.
(iii)16 nos of 65kA SP VSD WITH 32A SP MCB.
NB- This panel should have proper earth by suitable rated copper flat.
-
-
-
... More
250A DB PANEL FOR LINAC ROOM
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01 number of 250(200-250) Amps 4P MCCB with ROM 36kA with adjustable Thermal Magnetic Release with Ics=100% Icu. with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 300Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 63A 4P MCB 02 NOS FOR MACHINE.
Out going- (ii) 01 no 160A 4P MCCB with ROM,Ics=100% Icu & adjustable thermal magnetic release,25kA FOR accelaraor machine.
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with RS 485 port & CTs(Sicure/L&T,CT-KAPPA or equievalant make & model).
1
-
-
... More
The panel is fabricated as per the approved GA drawing
160A DB PANEL FOR LINAC ROOM
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01 number of 160(125-160) Amps 4P MCCB with ROM 25kA with adjustable Thermal Magnetic Release with Ics=100% Icu. with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 200Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i)32A 4P MCB 02 NOS FOR MACHINE.
Out going- (ii) 63A 4P MCB 02 NOS FOR MACHINE.
Out going- (iii)32A 3P MCB 02 NO FOR MACHINE.
Out going- (iv) 01 nos 100A 4P MCCB with ROM,Ics=100% Icu & adjustable thermal magnetic release,25kA FOR RAW POWER (make- Equievalant model of Out going- (v) 01 nos 63A 4P MCCB with ROM,Ics=100% Icu & adjustable thermal magnetic release,25kA FOR RAW POWER.
Instrument- (i) 09 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 02 set of MFM with RS 485 port & CTs(Sicure/L&T,CT-KAPPA or equievalant make & model).
1
-
-
... More
The panel is fabricated as per the approved GA drawing
100A DB PANEL FOR LINAC ROOM
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01 number of 100(80-100) Amps 4P MCCB with ROM 25kA with adjustable Thermal Magnetic Release with Ics=50% Icu. (make- Equievalant LSING model of Legrand-(DPX3)/Schneider-(NSX)/Siemens-(3VM)/L&T(D SINE,MTX-1) or equievalant make with proper model) ISI marked)with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 150Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i)32A 4P MCB 01 NO FOR MACHINE( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant make with proper model) ISI marked).
Out going- (ii) 63A 2P MCB 03 NOS FOR MACHINE( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant make with proper model) ISI marked).
Out going- (iii)63A 3P MCB 01 NO FOR MACHINE( Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model equievalant make with proper model) ISI marked).
Instrument- (i) 09 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with RS 485 port & CTs(Sicure/L&T,CT-KAPPA or equievalant make & model).
1
-
-
... More
63A DB PANEL FOR LINAC ROOM
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01 number of 63(40-63) Amps 4P MCCB with ROM 25kA with adjustable Thermal Magnetic Release with Ics=50% Icu. )with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 150Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with RS 485 port & CTs(Sicure/L&T,CT-KAPPA or equievalant make & model).
2
-
-
... More
500KVAR APFC PANEL (Reactive power management)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical Capacitor bank panel of 500 KVAr APFC with 1000A ACB 3P MDO to be merge with main panel busbar as I/C, all branch protection is with MCB along with capacitor duty contactors, 7% Aluminium Reactor & Capacitor is with 480V AC MPP Technology (The capacitor should have over current withstand capability of 2.5xIn, Peak Inrush withstand capability of 350xIn, Number of Switching operation per year should not less than 15000 & the operating life should be min 200000 hrs) and designed as G.A drawing.s per direction of Engg.-in-Charge. (Make-Equievalant higher model of L&T/Schneider/Siemens/Hager/ or equievalant reputed make with proper specification & model ISI marked as approved )Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
1
-
-
... More
UPS SYSTEM
-
-
-
... More
Supply ,installation ,testing & commissioning of 100KVA ON LINE UPS SYSTEM WITH suitable size battery bank, phase sicuency controller,rated of battery & isolation transformer, IGBT based inverter system with inbuilt isolation transformer & automatic phase sicuency corrector of 3ph in put to 3 ph output,415V,protection for fault by OL,UV,EF,GF,OC,Ph. Sicuency release of equievalant model of APC/ Schneider/ RELLIO/ Emersion or equievalant reputed make A catogory, ISI marked as approved ) including supply of rack inverter stand with sufficient backup upto 30 minutes with all required accessories to complete the job including all connection.LOAD OF linac,ICU) as per direction of Engg.-in-Charge. Warrentee period of all accessories & component & system must be 5 years & compelete test certificate must be submitted along with ups including component list & SLD.
2
-
-
... More
CABLE TRAY PERPORATED TYPE FOR DISTRIBUTION OF POWER
-
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
65
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
41
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
72
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 34mm(H) x 225mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
65
-
-
... More
500 KVA DG
-
-
-
... More
Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 500KVA ( Make -Kirloskar / Jakson / sterling) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below.
A. Alternator make : Kirloskar / Stamford / Crompton Greaves /Caterpillar/Cumins/ or equievalant reputed make & model ISI marked as approved as per direction of Engg.-in-Charge. Warrentee period of panel must be 5 years & compelete test certificate must be submitted along with DG set including component list & smoke exhaust system drawing,certified ISO 8528
(a) ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.
-
-
-
... More
(b) ENGINE: Diesel Engine make : Kirloskar / Cummins / Caterpillar / Perkins /Volvo penta /Ashok Leyland equievalant make & model ISI marked as approved . Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 500KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer standards.
(c) AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 500 KVA DG Set complete with Battery Charger & leads as required.
(d) BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required.
-
-
-
... More
FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos GI pipe earthing for body and 2 nos copper plate earthing for neutral, control cable of 15mtr 2.5sqmm 6core , civil foundation work.
(The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work)
2
-
-
... More
Design Supply, Installation, Testing & Commissioning and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift complete with all standard equipments accessories and control equipments as per Manufacturer's Design with lift control panel including BMS facility and as per BIS and fulfilling following requirements.It includes supply,laying of power cable and fixing of glands,lugs etc.( Machine room less, Gearless Type).Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. HOSPITAL LIFT OF machineroom less type(Make-Kone/Johnson/OTIS/Schindler/Thysenkrup or equievalant reputed make & model A catogory, ISI marked as approved )Warrentee period of accessories & system must be 5 years & compelete test certificate must be submitted along with Lift including component list .
-
-
-
... More
Type: PASSENGER LIFT Load: 13 PASSENGER(845 KG)
Speed: 1.50 Meter Per Second.
Control: Variable voltage with variable frequency
Operation: Microsprocessor based simplex collective selective with / without Lift Attendant.
Total Rise: About 13.5 Meters.
Landings: For All on same side. Floors Served: G, 1,2,
Signals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings.
Lift Shaft Size: About as 13 passenger hospital lift standard, finished with Plaster. Lift Car Size: About hospital lift standard.
Car Entrance: Clear Opening hospital lift standard high Protected with transperant Car Door.
Landing Entrance: Clear Opening hospital lift standard high Protected with Landing Door.
Car Door: Stainless with front glass to transparent Two Panel Center opening flush type.outer visible.
Landing Door: Mild Steel Two Panel Center opening flush type P.
Door Operation: Automatic Electric Power operated Door with in infrared protection.
-
-
-
... More
Car Interior: Stainless Steel Panel with Hair line finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex Tiles.
Car Ceiling & Lighting: Led Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum.
Car Ventilation: Pressure Fan with anodized Aluminum Grill.
Emergencing Lighting in Car: Battery operated Emergencing designed Lighting in the Lift Car.
Intercom System: Battery operated intercom system in Lift Car and Control Room.
Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.
Electric Power Supply:Control panel with all safety majors with AC 415 Volt 3 Phase 50 Hz terminated in control area.
-
-
-
... More
OTHER SPECIAL PROVISIONS
• VVVF CONTROLLER
• AUTOMATICE RESCUE DEVICE (ARD).
• EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL.
• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION INDICATORS.
• FIRE RATED DOOR FOR 1 HOUR.
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET.
• FLOOR ANNUNCIATOR WITH MUSIC.
• INFRA RED SCREEN.
• OVER LOAD WARNING INDICATOR.
• BRAILLE BUTTONS.
• FREE SERVICE FOR 5 YEARS.
• PIT LADER.
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME.
• PROVISION FOR CC CEMARA WITH INSTRUEMENT .
Fire Man Switch: Fire Man Switch at Main Landing Terminal.
1
-
-
... More
Design Supply, Installation, Testing & Commissioning and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift complete with all standard equipments accessories and control equipments as per Manufacturer's Design with lift control panel including BMS facility and as per BIS and fulfilling following requirements.It includes supply,laying of power cable and fixing of glands,lugs etc.( Machine room less, Gearless Type).Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. HOSPITAL LIFT OF machineroom less type(Make-Kone/Junction/OTIS/Schindler/Thysenkrup or equievalant reputed make & model A catogory, ISI marked as approved )Warrentee period of accessories & system must be 5 years & compelete test certificate must be submitted along with Lift including component list .
-
-
-
... More
Type: PASSENGER LIFT Load: 26 PASSENGER(1690 KG).
Speed: 1.5 Meter Per Second.
Control: Variable voltage with variable frequency.
Operation: Microsprocessor based simplex collective selective with / without Lift Attendant.
Total Rise: About 13.5 Meters.
Landings: For All on same side. Floors Served: G, 1,2
Signals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings.
Lift Shaft Size: About as 26 passenger hospital lift standard, finished with Plaster. Lift Car Size: About hospital lift standard. Car Entrance: Clear Opening hospital lift standard high Protected with transperant Car Door.
Landing Entrance: Clear Opening hospital lift standard high Protected with Landing Door.
Car Door: Stainless with front glass to transparent Two Panel Center opening flush type.outer visible.
-
-
-
... More
Landing Door: Mild Steel Two Panel Center opening flush type P.
Door Operation: Automatic Electric Power operated Door with in infrared protection. Car Interior: Stainless Steel Panel with Hair line finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex Tiles.
Car Ceiling & Lighting: Led Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum.
Car Ventilation: Pressure Fan with anodized Aluminum Grill.
Emergencing Lighting in Car: Battery operated Emergencing designed Lighting in the Lift Car.
Intercom System: Battery operated intercom system in Lift Car and Control Room.
Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.
Electric Power Supply:Control panel with all safety majors with AC 415 Volt 3 Phase 50 Hz terminated in control area.
-
-
-
... More
OTHER SPECIAL PROVISIONS
• VVVF CONTROLLER
• AUTOMATICE RESCUE DEVICE (ARD)
• EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL
• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION INDICATORS.
• FIRE RATED DOOR FOR 1 HOUR.
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET.
• FLOOR ANNUNCIATOR WITH MUSIC.
• INFRA RED SCREEN.
• OVER LOAD WARNING INDICATOR.
• BRAILLE BUTTONS
• FREE SERVICE FOR 5 YEARS
• PIT LADER
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME
• PROVISION FOR CC CEMARA WITH INSTRUEMENT Fire Man Switch: Fire Man Switch at Main Landing Terminal.
2
-
-
... More
K-1000A,800A,400A BUS DUCT SYSTEM WITH ALL ACCESSORIES & TAP OFF BOX(DG/SUBSTATION TO MAIN PANEL AT CONTROL ROOM
-
-
-
... More
800A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with 130A/sqcm of L&T/SChneider/Legrand/Hager/ or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge. (FOR MDB TO 500KVA TRANSFORMER & 2 NOS 500 KVA DG)Warrentee period must be 5 years & compelete test certificate must be submitted .
16
-
-
... More
INSTALLATION OF ABOVE
1
-
-
... More
630A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with 130A/sqcm of L&T/SChneider/Legrand /Hager or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge. (FOR MDB TO FDB)Warrentee period must be 5 years & compelete test certificate must be submitted .(MAIN PANEL TO FDB POWER OF ALL FLOOR)
16
-
-
... More
INSTALLATION OF ABOVE
1
-
-
... More
400A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with suitable 130A/sqcm of L&T/SChneider/Legrand or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge. (FOR MDB TO FDBL/DROP FDB P)Warrentee period must be 5 years & compelete test certificate must be submitted .
16
-
-
... More
INSTALLATION OF ABOVE
1
-
-
... More
1000A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with suitable of 130A/sqcm L&T/SChneider/Legrand or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge.(MAIN PANEL TO 620 KVA TRANSFORMER to transformer Warrentee period must be 5 years & compelete test certificate must be submitted .
41
-
-
... More
INSTALLATION OF ABOVE
1
-
-
... More
200A 415V 25KA 3P 4W 100% N IP54 after fixing plug in box, Aluminium conductor Sandwich Busduct with suitable of 130A/sqcm L&T/SChneider/Legrand or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation. Mica insulation not allowed due to its brittle nature. Complete with End Flange - RO , Bends - RO,Plug in Boxes - RO, External Earth Strip 2x50x6 - RO, Adaptor Box - RO , Copper Flexibles - RO, Supporing structures as per the direction of Engg-in-charge.(drop emergency panel of floor) Warrentee period must be 5 years & compelete test certificate must be submitted .
16
-
-
... More
INSTALLATION OF ABOVE
1
-
-
... More
Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing rising mains for use on 3 phase 4wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated without MCCB ( complete etc. as required,as per the direction of Engg-in-charge .Make-L&T/SChneider/Legrand/Siemens/Hager/Legrand or equievalant reputed make & model A catogory, ISI marked as approved completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation.Warrentee period must be 5 years & compelete test certificate must be submitted .
-
-
-
... More
400A 30kA SC for 1 sec .
2
-
-
... More
250A 30kA SC for 1 sec
2
-
-
... More
125A 30kA SC for 1 sec
2
-
-
... More
630A 30kA SC for 1 sec
2
-
-
... More
63A 30kA SC for 1 sec
2
-
-
... More
EXTERNAL LIGHTING
-
-
-
... More
Supply ,Installation testing commissioning of elegant look in double arm by 2x120 W LED street light@120lm/watt, having die cast aluminium housing with toughened glass having lumen output of 14500 or more (As per LM 79 report accrediated by NABL lab) ,IP 66 protection or more , LED street light model will be vide Panasonic /Bajaj/Philips/LT/WIPRO/Jaquar /Halonix/or equievalant reputed make & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years . The luminaire to be installed in 9 mtr long GI hot dip galvanized pole of Valmont/Transrail/Bajaj/eq make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCB as per the pole drawing and direction of EIC against which inspection mat take place. It should be installed after making proper size RCC foundation by considering RCC foundation by using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge.
10
-
-
... More
Supply ,Installation testing commissioning of elegant look Panasonic single arm by 1x 120 W LED street light @120lm/watt having die cast aluminium housing with toughened glass having lumen output of 14500 or more (As per LM 79 report accrediated by NABL lab) ,IP 66 protection or more , LED street light model will be vide Panasonic /Philips/LT/WIPRO/Jaquar /Bajaj/Halonix/or equievalant reputed make & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years . The luminaire to be installed in 9 mtr long GI hot dip galvanized pole of Valmont/Transrail/bajaj/ equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCB as per the pole drawing and direction of EIC against which inspection mat take place. It should be installed after making proper size RCC foundation by considering RCC foundation by using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge.
15
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor/Jaquar /Bajaj/Halonix/or equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 120 lm/w or more (As per LM 79 report accrediatedby NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic / Philips/LT/WIPRO /Bajaj or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
10
-
-
... More
Supplying, Erection, Fixing, connection & testing of Panasonic 40-45W LED GATE Light of Panasonic/ Philips/LT/WIPRO/Jaquar /Bajaj/ halonix/equievalant reputed make A catagory ISI marked as approved maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
-
... More
Supplying, Erection, Fixing, connection & testing of 120 W LED special type Flood Light of die cast alluminium housing with frame & toughened glass ,IP 66 protection vide panasonic/Philips/LT/WIPRO/Jaquar /Bajaj/ Halonix/equievalant reputed make & model A catogory, ISI marked as approved having 5 years warranty as approved make G.I cover box including MCB box & including Auto On off provision with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
4
-
-
... More
Supplying ,installation & fixing of 9-11W(BOLLARD), High efficient LED with extruded Aluminium housing with PC diffuser.CRI70, IP65, CCT - 3000K, Ambient temp-0 to 50 DegC, Driver efficiency80%,THD10%, Powerfactor0.9, Surge protection-3 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level60V DC as per IEC standard. Luminaire lumen ≥ 565 lumens (51 lm/W). Make: Wipro /bajaj/Philips/ LT/Trilux/Jaquar/Halonix/Eq make. including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
8
-
-
... More
Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
4
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge.
288
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
21
-
-
... More
CABLING
-
-
-
... More
Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS/KEI/RR cable or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3.5core x 35 sq mm
120
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
80
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
40
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x35sq mm
4
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials
1
-
-
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
188
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
50 mm dia
12
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per direction of Engg.-in-Charge. .(Equievalant model each item of Legrand/Schneider/L&T/ABB or equievalant make & model)Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials.
1
-
-
... More
(M)DETAIL ELECTRICAL ESTIMATE FOR PROVIDING LIGHTENING PROTECTION FOR CONSTRUCTION OF DEPARTMENT OF RADIATION ONCOLOGY,FAKIR MOHAN MEDICAL COLLEGE & HOSPITAL, BALASORE
-
-
-
... More
(LIGHTENING CONDUCTOR)
-
-
-
... More
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA system should be Replacement Warranty will be 5 years
24
-
-
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA system should be Replacement Warranty will be 5 years
100
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The entire LA system should be Replacement Warranty will be 5 years
66
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA system should be Replacement Warranty will be 5 years
66
-
-
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA system should be Replacement Warranty will be 5 years
22
-
-
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA system should be Replacement Warranty will be 5 years
22
-
-
... More
Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom. as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)(FOR lightening protection & Building Electrification).The entire earthing system should be Replacement Warranty will be 5 years.Make-OBO/Star-x/ABB or equievalant reputed make & model A catogory.
4
-
-
... More
ON GRID SOLAR SOLAR PV SYSTEM
-
-
-
... More
Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Poly Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on Aluminium / GI structure of suitable strength with following components a complete aas arequired: a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 17.3%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Kamal Solar/ EMMVEE/ Venus / Anchor/panasonic or equievalant reputed make & model A catogory, ISI marked as approved . The entire SOLAR system should be Replacement Warranty will be 5 years
50
-
-
... More
BUILDING MANAGEMENT SYSTEM (BMS). The entire BMS system should be Replacement & maintainance Warranty will be 5 years
-
-
-
... More
BMS Computer System: PC (Pentium Core i5 processor, 8GB RAM, 52X DVD Writer, 21" TFT Color monitor, 500GB HDD SATA, Microsoft Bus mouse with pad, Windows 10 Operating system, Keyboard, Expansion Bus with spare Slot, with original license, protection & restore key, includes LAN Card, USB ports, 21" Color Monitor, A4 Laserjet Printer, etc as per direction of engineer in charge.Make-Schneider/Honeywell/ equievalant reputed make Acatagory ISI marked as approved
1
-
-
... More
BMS System Graphical Software : Web Based Graphical Software with 03 Nos. Concurrent User Licences meeeting the requirements in the Given I/O Summary and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Mgmt System as per Specifications. Software shall be able to communicate with Bacnet & Modbus devices simultaneously, with unlimited IO Point licensing capacity. Same software can be utilized as programming / commissioning software of DDC, NAC etc as per direction of engineer in charge(make-Schneider/Honeywell or equievalant reputed make Acatagory ISI marked as approved.
1
-
-
... More
DIN Rail Mount Network Controller / 3rd Party Software Integration Unit for interfacing DDCs / 3rd Party Devices to BMS PC, in suitable Enclosure and Power Supply. Minimum hardware configuration of each Unit must provide following features as a minimum as per direction of engineer in charge:(make-SchneiderHoneywell or equievalant reputed make Acatagory ISI marked as approved
a) Two Nos. Ethernet Port -10 / 100 Mbps (Supporting Star / Ring Architecture).
b) Two Nos. RS-485 port (Configurable as BACNET / MODBUS etc. as required. One Port shall be used for Integration and the secondary port shall be kept as Redundant).
c) One Nos. LONWORKS Interface Port - 78KB TP/FT-10
d) USB Host Port and Device Port.
e) 4GB Built-in Memory / Storage
f) BTL & UL Listed
-
-
-
... More
For LT Panels (Energy Meters - 10 Nos. & Bus Coupler - 2 Nos.) - 40 MODBUS Points each. For VFD's - 2 Nos - 60 MODBUS RTU Points,For DG (1 Nos) - 20 MODBUS RTU Points,For UPS (3 Nos) - 20 MODBUS RTU Points,For Addressable Fire Alarm Panel (1 Nos) - 50 MODBUS / BACNET / RS485 Points
1
-
-
... More
BACNET/IP DDC Controller with built-in I/O modules, The controllers shall be 32 bit microprocessor based standalone as well as networkable type with real time clock. The DDC's shall have dual Ethernet Port to enable Ring as well as Star Architecture, Mounted inside lockable MS Cabinets duly powder coated, connector strip, internal wiring, relays, current transformer, MCB, internal wiring etc. (expansion modules / separate IO Modules or Modular IO's are not acceptable). For details, please refer to the Technical Specifications. DDC's shall be selected as per the Provided IO Summary. BTL Certified and UL Listed. Each DDC should have 20 Universal Type IO Points plus dedicated 8 Nos.Digital Output (Total 28 Hardware Points)as per direction of engineer in charge (make-Schneider/Honeywell or equievalant reputed make Acatagory ISI marked as approved)
-
-
-
... More
DDC Panel for Electrical System.
2
-
-
... More
DDC Panel for Water Management System and PHE
1
-
-
... More
DDC Panel for HVAC System
1
-
-
... More
DDC Panel for Light Management System
1
-
-
... More
8 Port Unmanaged Network Switch 10/100 MBPS Copper Ports mounted in a suitable Rack with all required accessories as per direction of engineer in charge (For DDC's and System Integration Units Connectivity).(make-Schneider/Honeywell or equievalant reputed make Acatagory ISI marked as approved
2
-
-
... More
Sensors and field devices
-
-
-
... More
Supply, installation, testing, commissioning of necessary Input sensor transmitters/transducers comprising the following as per direction of engineer in charge:make-Schneider/Honeywell or equievalant reputed make Acatagory ISI marked as approved
-
-
-
... More
Outside Temperature and RH Sensor
1
-
-
... More
Wall Mount Temperature and RH Sensor with LCD Display
1
-
-
... More
Differential Pressure Switch for water Pumps
1
-
-
... More
Water Level Switch (Hi/Lo)
1
-
-
... More
Conduiting , Wiring and cabling
Supply, laying, termination of following cables / conduits etc:
-
-
-
... More
2 Core 1.5 Sqmm, PVC Insulated, ATC conductor multistranded, Shielded cable, for RS485 Communication Devices and Field Devices as per direction of engineer in charge
988
-
-
... More
CAT6 UTP Cable for connectivity of DDC's to Network Switch and Switch to Switch as per direction of engineer in charge
755
-
-
... More
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess with all accessories as required - 25mm Dia as per direction of engineer in charge
855
-
-
... More
HVAC WORK (CHILLER SYSTEM)Description
-
-
-
... More
AIR CONDITIONING System Design premble Design Basis - System Has been designed with Water cooled VFD Driven Screw Chiller. The Weather Condition has been reffred with BALANGIR Data from INDIA METEOROLOGICAL DEPARTMENT , Govt if India. Heat Load Input data i) Light Load – 1 W / Sq Ft.
ii) Occupancy as per Furniture Layout
iii) Fresh Air – as per Ashrae 62.1-2007
iv) Glass Solar Gain – 0.45
v) Glass U Factor - 0.75 BTU/HR/SFT/°F.
vi) Wall U Factor - 0.36 BTU/HR/SFT/°F.
vii) Partition Load - 0.32 BTU/HR/SFT/°F.
viii) Ceiling / Floor Load - 0.46 BTU/HR/SFT/°F.
ix) Exposed Roof - 0.12 BTU/HR/SFT/°F.
x) Equipment Load – As per Occupancy / 0.15 W Per Computer
xi) Builing Design will be Driven by ECBC Super Design IMP Note - Before Executing civil Project, HVAC Design & Equipment Spec has to be submitted and dully vetted by EIC with Architect cum Consultant of this Project through Executing agency.
-
-
-
... More
Design, Supply, Installation, Testing and Commissioning of high efficiency water cooled packaged VFD driven Screw chillers of Actual capacity of 150 TR each at 6.7 Deg.C Chilled water leaving Temp. working on Refrigerant R134A, the unit shall be suitable to install on the concrete structure (Indoor). The water cooled package chiller shall comprise of Semi Hermetic / Hermetic Twin-Screw/ Mono Screw Horizontal compressors with suction gas-cooled motor, Unit Mount VFD driven , insulated shell and tube type DX/flooded evaporator chiller, water cooled condensers with copper tubes. The Fouling Factor for evaporator chiller shall be not more then 0.0001 FPS units & Condenser 0.00025 FPS Unit. Each unit shall be complete with single/Multi Compressor refrigerant circuits, copper refrigerant piping, full charge of refrigerant gas, stepless capacity control with control wiring & power cable terminations, safety controls including electronic expansion valves etc.The Evaporator Shall be Insulated with 19mm + 19 mm mm Thick NITRILE RUBBER as mandatory factory or Site Insulation is acceptable .Also the OEM of the Compressor and Chiller should be Same company . The chiller package shall also include with micro processor based control panel with HMI. The microprocessor panel shall provide for 3rd party BMS connectivity for all the parameters and signals. The compressors shall be suitable for operation on 415+ 10% volts , 50 Hz, 3 phase, AC power supply. The chiller package shall include complete factory fabricated and assembled in galvanized steel frame to form rugged & compact assembly with vibration isolation mountings etc. as recommended by manufacturer. price shall inclued all Import duty & Cess if any Except GST Chiller performance shall be in accordance with ARI shall only be acceptable. The total system shall be complete all as per the drawings, technical specifications & instructions of EIC. 1 W + 1 S = 2 Make - YORK/TRANE/ CARRIER/ HITACHI / DAIKIN/ CARRIER or equivalent - Chiller Should be AHRI Ceritified Models of the Manufactuers
2
-
-
... More
CHILLER
Chilled water IN 54 Deg F /12.22 Deg C
Chilled water OUT 44 Deg F /6.67 Deg C
Fouling Factor 0.0001 FPS, Pressure Drop - 4 M max
CONDENSER
Condenser water IN 89.6 Deg F / 32 Deg C Condenser water OUT 98.6 Deg F / 37 Deg C Fouling Factor 0.00025 FPS, Pressure Drop - 5 M max
COP @ ARI CONDITION SHALL BE Min 5.8 COP
-
-
-
... More
Lifting , Shifting ,Installation, Testing & Commissioning Charge, ( Excluisve of wall breaking charges + foundation Civil Work )
2
-
-
... More
SITC of 125 mm C.I. BUTTERFLY VALVES IN PN10 RATING DULY INSULATED WITH OPERATING LEVER AND GRADUATED DISC etc. complete in all respect as per direction of EIC (Chilled water valves is to be insulated)
4
-
-
... More
SITC of 125 mm dia Balancing valve duly insulated PN 16 rating with operating lever and graduated disc etc. complete in all respect as per direction of EIC .
2
-
-
... More
SITC of Single Arch Flexiable Rubber Bellow -125 mm dia PN 16 rating
4
-
-
... More
SITC of Dial type (4" dial) pressure gauge (0-150 psi) with necessary fittings and isolation valve etc. complete in all respect with ball valve as per direction of EIC .
4
-
-
... More
SITC Stem Type Thermometer for measuring temperature in Chilled water and cooling water circulation line with necessary fittings with ball valve & glycol immesered etc. complete in all respect as per direction of EIC .
4
-
-
... More
SITC of Flow Switch of Plastic body with Double Flap at with Signal Out Put of Flow in the Pipe System with necessary fittings complete in all respect as per direction of EIC .
2
-
-
... More
SITC of Bronze body full bore Ball Valve-40 Dia for Drain
2
-
-
... More
Condenser Side
-
-
-
... More
SITC of 150 mm Butterfly Valve complete with Long Spindal, Flange , Nut bolt ,and weilding arrangement , PN -16 Rating Vale of sizes 32 mm n above shall be made with cast iron SG IRON DISC with nylone coated, ss 431 stem , EPDM intgerally moulded with hand leaver or gear BOX (Gear operated PN 16) with Out Insulation with necessary fittings complete in all respect as per direction of EIC
4
-
-
... More
SITC of 150 mm dia Balancing Valve with Built inbuilt measuring facelities with CI body flanged constructed with EPDM coted disc with long pitch with protected out ppe insulation (PN 16) with Out Insulation .
2
-
-
... More
SITC of water Flow Switch
2
-
-
... More
SITC of Double / Single Arch rubber bellows of pN 16 Rating Flexible Connection - 150 mm dia
4
-
-
... More
SITC Stem Type Thermometer for measuring temperature in Chilled water and cooling water circulation line with necessary fittings with ball valve & glycol immesered etc. complete in all respect as per direction of EIC .
4
-
-
... More
SITC of Flow Switch of Plastic body with Double Flap at with Signal Out Put of Flow in the Pipe System with necessary fittings complete in all respect as per direction of EIC .
2
-
-
... More
SITC of Bronze body full bore Ball Valve-40 Dia for Drain
2
-
-
... More
COOLING TOWER
-
-
-
... More
SITC of Cooling tower of capacity :180 TR( heat rejection capacity ) or Suitable for 150 TR chiller actual capacity , GPM - 510 USGPM & Ambient wet bulb temperature- 83 F, Water entering temperature - 98.6 F , Water leaving temperature - 89.6 F etc made out with FRP type body and water basin , PVC filling with integral louvers and drift eliminator, INDUCED DRAFT cross flo/ COUNTER FLOW design ,fitted with spray nozzles of having self rotating type sprinklers, statically and dynamically balanced counter flow type fan direct driven with TEFC squirrel cage induction motor with suitable starter, suction screen, make up quick fill arrangement, overflow and drain connections with necessary valves and suitable inspection ladder, access arrangement for cooling tower interior, cement concrete foundation, steel supporting structure, anti- vibration mountings etc complete as per manufacturers design and with necessary PCC hard standing around the area of width not less than 750 mm from the platform of the cooling tower with all necessary fitting & fixtures etc complete in all respect as per direction of EIC. (1 w + 1 s)
Make - Advance / Paharpur / Bell / Southern / Mihir or equivalent
2
-
-
... More
SITC of Butterfly Valve -150 mm dia PN 16 Rating with operating lever and graduated disc etc. complete in all respect as per direction of EIC . (Chilled water valves is to be insulated) condeser with out insulation will be fixed across chille condeser line .
4
-
-
... More
SITC of y strainer - 150 mm dia dia for PN 16 Rating
2
-
-
... More
SITC of Quick fill and drain valve piping connection with UPVC pipes and valves
1
-
-
... More
PUMPS- Condenser
-
-
-
... More
Supply, installation, testing and commissioning of the following equipment as per specifications schedule and drawings.
-
-
-
... More
Supply, installation, testing & commissioning of End Suction Back Pull Out with Bronze Impeller factory assembled & tested for rated efficiency complete with motor & common base frame, coupling guard etc. for re- circulation of condenser water for the central airconditioning system as detailed below. Each pump set should be capable of delivering 510 USGPM of water against 18.0 meters head (min.) and shall be suitable for operation on 415 ± 10% Volts, 50 Hz, 3
Phase AC power supply. 1 W +1 SB
1 No. Endsuction Back Pull Out Pump 1 no. suitable HP, IP 55 TEFC Squirrel Cage Induction Motor IE3 effeciency with class B insulation 1500 rpm synchronous speed operating on 415 ± 10% volts 3 phase, 50 Hz AC supply.
Lot-Mounting frame with Antivibration isolators for the pump unit.
Pumps mentioned above shall also be complete with mechanical seal and drain connection etc. Make - Wilo/ xylum/ kirlosker/ grundfoss/ Bell& Gosset
2
-
-
... More
SITC of 150 mm C.I. BUTTERFLY VALVES IN PN10 RATING DULY INSULATED WITH OPERATING LEVER AND GRADUATED DISC etc. complete in all respect as per direction of EIC (Chilled water valves is to be insulated) condeser valves with out Insulation as per EIC instrcction
4
-
-
... More
SITC of NRV ( Check Valve ) 150 mm dia PN 16 rating duly insulated with operating lever and graduated disc with necessary fittings etc. complete in all respect as per direction of EIC .
2
-
-
... More
SITC of Single Arch Flexible Bellow 150 mm dia of PN 16 rating
2
-
-
... More
SITC of Y Stainer 150 mm dia PN 16 rating
2
-
-
... More
Dial type (4" dial) pressure gauge (0-150 psi) with necessary fittings and isolation valve with necessary fittings etc. complete in all respect as per direction of EIC.
4
-
-
... More
SITC Stem Type Thermometer for measuring temperature in Chilled water and cooling water circulation line with necessary fittings etc. complete in all respect as per direction of EIC .
4
-
-
... More
PUMPS- Primery & Secondry Chilled water System Chilled Water Pumps for Fixed Pumping System
-
-
-
... More
Supply, installation, testing & commissioning of End Suction Back Pull Out with Bronze Impeller factory assembled & tested for rated efficiency complete with motor & common base frame, coupling guard etc. for re- circulation of condenser water for the central airconditioning system as detailed below. Each pump set should be capable of delivering 375 USGPM of water against 20.0 meters head (min.) and shall be suitable for operation on 415 ± 10% Volts, 50 Hz, 3
Phase AC power supply. 1 W +1 SB
1 No. Endsuction Back Pull Out Pump 1 no. suitable HP, IP 55 TEFC Squirrel Cage Induction Motor IE3 effeciency with class B insulation 1500 rpm synchronous speed operating on 415 ± 10% volts 3 phase, 50 Hz AC supply.
Lot-Mounting frame with Antivibration isolators for the pump unit.
Pumps mentioned above shall also be complete with mechanical seal and drain connection etc. Make - Wilo/ xylum/ grundfoss/ Bell& Gosset
-
-
-
... More
1 No. End Suction Back Pull Out Pump
1 no. suitable HP, IP55 TEFC Squirrel Cage Induction Motor IE3 efficiency with class B insulation 1500 rpm synchronous speed operating on
415 ± 10% volts 3 phase, 50 Hz AC supply.
Lot-expanded polystrene (T.F. Quality) insulation of not less than 50 mm thick duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump in two semicircular sections as per specifications.
2 Nos. - 150 mm dia dial type pressure gauges.
Lot-Mounting frame with Antivibration isolators for the pump unit.
The Pumps mentioned above shall also be complete with mechanical seal and drain connection.
Primary Chilled water pumps as described above
(1W + 1SB)
2
-
-
... More
SITC of 125 mm C.I. BUTTERFLY VALVES IN PN10 RATING DULY INSULATED WITH OPERATING LEVER AND GRADUATED DISC etc. complete in all respect as per direction of EIC
4
-
-
... More
SITC of NRV ( Check Valve ) 125 mm dia PN 16 rating duly insulated with operating lever and graduated disc with necessary fittings etc. complete in all respect as per direction of EIC .
2
-
-
... More
SITC of Single Arch Flexible Bellow 125 mm dia
4
-
-
... More
SITC of Y Stainer 200 mm dia PN 10
2
-
-
... More
SITC of Dial type (4" dial) pressure gauge (0-150 psi) with necessary fittings and isolation valve with necessary fittings etc. complete in all respect as per direction of EIC.
4
-
-
... More
SITC of Stem Type Thermometer for measuring temperature in Chilled water and cooling water circulation line with necessary fittings etc. complete in all respect as per direction of EIC .
4
-
-
... More
AIR HANDLING UNIT FOR FLOOR MOUNTED & OT AHU ALSO CEILING SUSPENDED TYPE
-
-
-
... More
Supply installation, testing & commissioning of factory fabricated Double Skinned air-handling unit horizontal type fabricated out of extruded aluminium section with Thermal break Aluminium extruded profile at corners and at joints for double skin air handling units alongwith internal covings with mixing chamber with 0.6mm thick pre-plasticide sheet outside & 0.6 mm thick polished Stainless Steel sheet inside with Direct driven OEM Suitable backward / Forward curved fan and fan motor TEFC (EFF1) type suitable for operation on 415volts±10%,50Hz ± 5% AC supply,fan motor shall be VFD driven including supply installation ,testing & commissioning of VFD (with Harmonic filters) along with compatibility of I/O signals etc complete with other accessories as required. 8/6/4 RD , prefilter (EU-4) section with non woven synthetic media of 10µ (micron) particle size with an efficiency of 90% , fine filter section with fine filters (EU-6) of 5µ (micron) particle size with an efficiency of 95% shall be provided also.
-
-
-
... More
The polished stainless drain pan of 20 G duly insulated under cooling coil, shall be provided. sheet duly insulated.The Fan & motor shall be as PER OEM selction with Low Space The AHU shall be insulated with 43 mm thick injected fire retardent 40 Kg/m³ density PU foam.The AHU fan shall be pluged type.Marine light with limit switch shall be provided . The AHU shall confirm to standard specification & Schedule of Equipment. The capacity of airhandlers shall be as follows.The face velocity across cooling / heating coil, filters should not exceed 500 FPM. The capacities of airhandling shall be as follows. All the AHUs shall include D.O.L/Star-delta starter with By arrangement of VFD (upto 7.5HP DOL, above 7.5HP star delta), . Fresh air for all AHUs mentioned here under ashrae 62.1 specified room volume or Desired for room and coils to be sized accordingly and all AHUs to be controlled with OT (control panel) remote controller. Height of the Unit shall restrict to 850 mm Max for ceiling suspended units . Coil shall be 4/6 RD as per design Heat load . TSP for the CSU/ FMU shall be less than 55 mm of wg & 85 MM OF Wg and for TFA should be 8 RD and 65 mm TSP . VFD cost shall be included in the AHU itself . The Static Pressure shall be as per detailed desiging and noting will be paid extra if Static requirement has increased as per site situation . UV lamps Intensity shall as per ASHRAE standards of latest revision .
-
-
-
... More
to make complete set AHU smooth operation along with all valve manifold which inclued the 1 Nos 2 ways valve with thermostat ( display type ) and two no butterfly valve & Y strainer of capacity desired for each CSU / Floor Mounted AHUalso incluidng the thermometer & pressure gauge at in and out of the Coil etc complete complete in all respect as per direction of EIC.
each AHU comprising of a set of PN-16 rating 2 Way
pressure independent dynamic balancing cum control valve of required size fitted with modulating actuators having manual override facility on each AHU alongwith wiring for interconnections with 1.5 sq. mm Cu Conductor multicore armoured complete as required. The actuator shall have required shut off capability of minimum 4 bar rating. The acuator shall be compatible with BMS.The valve actuator shall be capable of accepting 2-10 volt DC, 4-20 mA electric signal and shall provide
similar transduced feedback output signal to control system.Make List - Edgetech / Waves / VTS / systemair or equivalent,Controls for AHU . For Detail refer the AHU schedule
-
-
-
... More
LINAC 15 MV (CFM= 5500, TR = 11.0 , Filter = PRE, MICRO) with 3 KW Heater & Humidifier system to install in the Duct inline for winter with UV Lamps in AHU in down wards
2
-
-
... More
CONTROL CONSOLE ROOM (CFM= 2000, TR = 5 , Filter = PRE, MICRO)
1
-
-
... More
HDR BRANCHTHERPY (CFM= 1600, TR = 4.0 , Filter = PRE, MICRO) with 3 KW Heater & Humidifier system to install in the Duct inline for winter
1
-
-
... More
CONTROL ROOM (CFM= 1600, TR = 4.0 , Filter = PRE, MICRO)
1
-
-
... More
MINOR OT (CFM= 2000, TR = 4.0 , Filter = PRE, MICRO,HEPA)
1
-
-
... More
3 MTR WIDE PASSAGE WITH 2 MTER WIDE PESSAGE (CFM= 7000, TR = 20.0 , Filter = PRE, MICRO) FMU
1
-
-
... More
CT SITUMULATOR (CFM= 1800, TR = 4.0 , Filter = PRE, MICRO)
1
-
-
... More
20 BED DAY CARE (CFM= 6000, TR = 14 , Filter = PRE, MICRO)
1
-
-
... More
WAITING LOBBY + CORRODOOR + MAY I HELP YOU + CORRIDOORS + WAITING ROOM + SAMPLE COLLECTION ROOM 25000 CFM / 10 TR
1
-
-
... More
ICU NCHARGE ROOM + ISLATION BAY _+ CLEAN DURG ROOM+ EXAMINIATION PROCEDUE ROOM 5600 / 14 TR
1
-
-
... More
3 MTR WIDE PASSAGE WITH 2 MTER WIDE PESSAGE + SITTING AREA+ DDC 5600 / 14 TR
1
-
-
... More
18 BED MALE WARD 10 TR/ 4000 CFM
1
-
-
... More
18 BED FEMALE WARD 10 TR / 4000 CFM
1
-
-
... More
10 BED FEMALE ICU 5TR / 2000 CFM
1
-
-
... More
Supply, erection, testing & commissioning of low noise cassette units complete with 2RD/3 RD as per manufacturer standards cooling coils, 3 speed fan with on/off 3 speed(Hi-Med-low) Thermostat , drain pan and pre filters. Coil face velocity restricted to 450 fpm for FCU and 500 fpm for ceiling suspended AHU/ cassette units . Suitable for 230 V, 50Hz Single Phase power connection with MCB of suitable rating.White Colour Front Grille, Fresh Air provision, In-built drain pump with interlock, cordless remote control, Sefl Contained Valve station, Digital display
Each cassette units shall be complete with Ball valve & Y-Strainer for chilled water supply line and Ball Valve & Dynamic Balancing Valve for Chilled water return line. Pressure & Temperature test points shall be provided. ( if not considred in valves ) The capacity & quantity of Cassette units s shall be as follows: Make - Bhutoria / Midea / Carrier /Trane / Cubic .
-
-
-
... More
1.5 TR, 600 CFM
1
-
-
... More
2.0 TR, 800 CFM
1
-
-
... More
2.5 TR, 1000 CFM
1
-
-
... More
Supply, erection, testing & commissioning of low noise Chilled Water High Wall mount FCU with decorative panel, cordless remote control, complete with two rows of cooling coils, 3 speed fan with on/off 3 speed(Hi-Med-low) Thermostat , extended drain pan (sandwiched SS construction only) and pre filters. Coil face velocity restricted to 450 fpm for FCU and 500 fpm for ceiling suspended AHU. Suitable for 230 V, 50Hz Single Phase power connection with MCB of suitable rating.
Each High Wall Unit shall be complete with Ball valve & Y-Strainer for chilled water supply line and Ball Valve & Dynamic Balancing Valve for Chilled water return line. Pressure & Temperature test points shall be provided.
The capacity & quantity of FCUs shall be as follows:
-
-
-
... More
1.0 TR, 400 CFM
5
-
-
... More
1.5 TR, 600 CFM
4
-
-
... More
2.0 TR, 800 CFM
3
-
-
... More
Supply, erection, testing & commissioning of MS ERW Insulated Chilled Water (Supply & Return) Piping complete with fittings, supports and all accessories including Insulation with Nitrile Rubber Class O rated min. density 40 Kg /cum & covered with aluminium cladding of 26 Gauge in plant room or exposed piping & other area should be covered with mechanical protection i.e 200 GSM GC cloth. (Pipes upto 150 NB shall be Heavy Grade as per IS: 1239 Part I and from 200 NB & above Pipes shall be as per IS: 3589 Gr. 330 of specified thickness.) Make - Jindal / TATA / SAIL / NEZONE
-
-
-
... More
200 mm NB
55
-
-
... More
150 mm NB
110
-
-
... More
125 mm NB
90
-
-
... More
100 mm NB
55
-
-
... More
80 mm NB
80
-
-
... More
65 mm NB
80
-
-
... More
50 mm NB
60
-
-
... More
40 mm NB
80
-
-
... More
32 mm NB
65
-
-
... More
25 mm NB
90
-
-
... More
Supply, installation, testing of MS C Class Cooling Water Piping laid between Cooling water pumps, Condenser shell and cooling towers as per details in drawings; the pipe shall be applied with paint for weather protection ; pipes shall be complete with required elbows (short and long), Tees, Reducers, flanges, fittings as required etc. complete in all respect as per direction of EIC.
-
-
-
... More
150 mm NB
30
-
-
... More
100 mm NB
10
-
-
... More
SITC BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water circulation as specified for Branch & Header line of Chilld water as per EIC instruction
-
-
-
... More
125 mm. dia valve. (50 mm thick insulation) for Branch Header Isloation
2
-
-
... More
80 mm. dia valve. (50 mm thick insulation)
4
-
-
... More
65 mm. dia valve. (50 mm thick insulation)
2
-
-
... More
50 mm. dia valve. (50 mm thick insulation)
2
-
-
... More
Balancing Valves for Branches & Header
-
-
-
... More
Supply, installation, testing & commissioning of following Balancing Valves with built in measuring facility with C.I. body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation and PN 16 pressure rating for chilled water plumbing duly insulated to the same specification as the connected piping and adequately supported as per specification. Quoted price shall be inclusive of 32 mm thick Nitrile rubber with aluminum Cladding of 0.63 mm thickness openable valve boxes.
-
-
-
... More
65 mm. dia valve.
2
-
-
... More
50 mm. dia valve.
1
-
-
... More
DUCTING AND ACCESSORIES - AIR-CONDITIONING SYSTEM & VENTILATION SYSTEM
-
-
-
... More
SITC of Site fabricated Galvanized sheet metal duct work including bends/ Guide vanes for supply air system complete with flanges, gaskets & supports etc., ducts to be fabricated / erected as per IS 277/ IS 655 Make , TATA BHUSAN / JINDAL / SAIL or equivalent
-
-
-
... More
24 G
550
-
-
... More
22 G
100
-
-
... More
20 G
40
-
-
... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber of density 50+/-10% Kg/m3, shall not exceed a thermal conductivity of 0.035 W/MK or better at 20 deg mean temperature class 'O' insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Complete duct insulation shall have 200 g/m² factory laminated, treated woven Glass Cloth coating for mechanical and UV protection for Exposed piping , Make - Armacell , A flex , K flex .
-
-
-
... More
with 25 mm thick aluminium foil faced Nitrile Rubber for exposed ducting
100
-
-
... More
with 19 mm thick Nitrile Rubber for indoor supply air ducting
680
-
-
... More
SITC of Accoustic Insulation 11-13 mm Thick Open Cell Nitrile rubber for ducting.
50
-
-
... More
Aluminium Opposed blade Multi Louvered Volume Control Duct Dampers
2
-
-
... More
Supply, erection, testing & commissioning of 1.5 Hrs. rated Motorized Fire dampers complete with micro switch. Fire Damper shall be tested for 90 minuites fire rating.
1
-
-
... More
SITC of Fire & Smoke Sensor, Actuator and Control Panel for Fire Dampers
1
-
-
... More
SITC of Return Air Riser Grilles with Powder Coated Finish complete with Removable Core Perforated Aluminium Sheet with fixing arrangement, Extruded Aluminium Powder Coated Framework, Integral Volume Control Damper. Size : 600 mm x 200 mm - Make List - ADP - Systemair , premier , dynacraft or equivalent
18
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated Diffuser with VCD, measured as per neck size
4
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated grilles with VCD having flange all around
4
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated Diffuser without VCD, measured as per neck size
2
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated grilles without VCD having flange all around
5
-
-
... More
Supply, erection, testing & commissioning of Fresh air louvre of extruded alumunium construction complete with 10µ Filter, VCD and Bird Screen
2
-
-
... More
Terminal Laminar Flow Modules For OT
-
-
-
... More
SITC of Ceiling Suspended Terminal Laminar Flow Modules for Operation Theaters complete with Casing in Aluminium / SS Construction, Minipleat HEPA Filters (H-13), SS Perforated Sheets at bottom, Integral DOP Testing arrangement from Clean Room Side, Suspension Arrangement, SS Pressure Plates & Hardware and Aluminium Diffusion Plate. Nominal Size : 2400 x 1800 x 480 mm (Ht) with pressure relife damper with necessary fittings etc. complete in all respect as per direction of EIC. Each Unit shall Have commisoing filter and after commissioning and Fresh and New Filtr has to be Provided .
1
-
-
... More
DUCTING & ACCESSORIES for OT s & LINAC
-
-
-
... More
Supply, erection, testing & commissioning of Al. Ducting fabricated at site, complete with turning vanes, collars, reducers as per IS - 655 (Class - VIII). The LINAC room ducting has to sel with fire rated & radation proof sealent to ensure the No radation has to come out as per Atomic Energy Guidlines of GOVT of India .
-
-
-
... More
24 G
100
-
-
... More
22 G
100
-
-
... More
Propeller Fans for Toilet Exhaust
-
-
-
... More
Supplying, installing, testing and commissioning of direct driven PROPELLER FANS for exhaust air. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Fan selection arrangement and Electrical characteristics shall be as follows :
-
-
-
... More
300 mm dia 900 RPM fan suitable for 220±5% volts 50 cycles, 1 phase AC supply.
4
-
-
... More
200 mm dia 900 RPM fan suitable for 220±5% volts 50 cycles, 1 phase AC supply.
3
-
-
... More
150 mm dia 900 RPM fan suitable for 220±5% volts 50 cycles, 1 phase AC supply.
1
-
-
... More
INLINE FAN Toilet Exhaust
-
-
-
... More
Supply, installation, testing and commissioning of Round / Cabinet type rectangular Inline fans with motor complete motor complete with TEFC Sq. Cage Induction motor suitable for 220 volts ± 10%, 50Hz ± 3 %, single phase A.C supply of class "F" insulation with , mountings accessories in all respect with wiring upto power supply point & of following capacities as per specification and tender drawing mentioned.
-
-
-
... More
800 cfm / 12 to 15 mm St.Pr.
3
-
-
... More
250 cfm / 12 to 15 mm St.Pr.
3
-
-
... More
200 cfm / 8 to 15 mm mm St.Pr.
1
-
-
... More
Complete Systsem water & air balancing for making the parameter of perfromace as per design of the system with respect to instruction of EIC and Must have to submite the Report dully vetted by Architect & design consultnat .The HVAC Contractor Must have experince of Min 10 Year in HVAC feild as Proejct & Commissioing Engineer and performance has to verify by third party consultnat nominated by EIC .
1
-
-
... More
SITC of Water Softning Units with suitable capacity to bring the hardness less than 150 PPM of hardenss lavel with tank and PVC pipe plumbing work neccessry from keeping source and neccessry arrangement with insulated expansion Tank
1
-
-
... More
Under Deck Insulation of Exposed Roof & OT floor below
-
-
-
... More
Supplying and fixing of thermal insulation on exposed roof (Of AC floor areas) with 50mm thick extruded polystyrene rigid insulation board of required size for Underdeck Insulation System to meet U= 0.12Btu/Hr.deg.F.sqft, complying with ISO 4898:2008 & ASTM C 578- 08b- type VI, having thermal conductivity of 0.0289 W/mk as per ASTM C 578.
120
-
-
... More
Supply, erection, testing & commissioning of AC Plant room M.C.C. complete with Incomer (600A MCCB) each and outgoing feeders with rated desired MCCB for 2 no. 150 TR Water Chiller Unit with Compressor, Starters for 2 Nos (1w+1s) Primary Chilled water pump, 2Nos (1w+1s) Condenser water pump, 2 nos Cooling Towers. MCC shall be floor mounted fixed construction type with AL bus bar. Ammeter shall be considered for all outgoing feeder . Al the Technical Details will be driven by Electrcial Spec of the tender and Final Design will be as per EIC
1
-
-
... More
Central console panel with on/off provision, push button, with indication facilities.
1
-
-
... More
6 Core X 1.5 Sqmm. FRLS PVC Wiring for Central Console Pannel
350
-
-
... More
IP CCTV Surveillance System
-
-
-
... More
Supply, Installation, Testing & Commissioning of 3MP IP Network TDN Low-Light IR Fixed Lens Ball Camera, 1/2.8" CMOS or better, 3MP (2304 x 1296) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.005 lux (color), 0 Lux IR On, min 3 IR LEDs, Smart IR with upto 40m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 HEVC, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:88°, V:47°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual/Daylight/Shadow/Fluroscent, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 67, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, NDAA & RoHS (EN63000) compliant.Make:Axis (Q series)/ Honeywell(35 Series)/ Mobotix
107
-
-
... More
Supply, Installation, Testing & Commissioning of 3MP IP Network TDN Low-Light IR Fixed Lens Bullet Camera, 1/2.8" CMOS or better, 3MP (2304 x 1296) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 40m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, Fixed Lens 2.8mm, Field of View FoV H:85°, V:45°, BLC, HLC, 3DNR, White Balance- Auto/Manual/Daylight/Shadow/Fluroscent, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, NDAA & RoHS (EN63000) compliant.Make:Axis (Q series)/ Honeywell(35 Series)/ Mobotix
20
-
-
... More
Supply , Installation , Testing and commissioning of 16 Channel NVR (Network Vedio Recorder) Embadded Linux based for recording upto 16CH @ 1080P with 02 nos. SATA HDDs minimum 20TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Control Pannel with LEDs Indication, 4 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Lin & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidance Clip Export to USB, 16 Channel Syncronous Playback, Plaback control i.e Play, Pause, Stop, Fast Forward, Backward, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Softawre, iPhone; iPad; Android based Mobile clients, 01HDMI & 01VGA Output, 02 On Board HDDS each up to 10TB, Alarm Input (08 nos.), Alarm Output (02 nos.), 16 POE Ports, 128 Mbps throughput, NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, NDAA & RoHS (EN63000) compliant.including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.Make:Axis (Q series)/ Honeywell(35 Series)/ Mobotix
8
-
-
... More
Supply , Installation, testing , commissioning of 8 TB Special Surveillance Hard Disk etc. complete in all respect as directed by the Engineer- in -charge.Make:Seagate /WD
8
-
-
... More
Supply , Installation, testing , commissioning of 42U Val Rack with Castor Wheels, cable manager, power manager and cooling fans etc. complete in all respect as directed by the Engineer- in -charge.Make:ValRack / Net Rack / APW
1
-
-
... More
Supply , Installation, testing , commissioning of CAT6 24 Port Patch Panel etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Amp / Dlink
4
-
-
... More
Supply , Installation, testing , commissioning of CAT6 Patch Cord 1 Mtr etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Amp / Dlink
100
-
-
... More
Supply , Installation, testing , commissioning of 24 port 10/100/1000 Mbps, 24 Port Gigabit PoE Switch with 2 SFP Ports etc. complete in all respect as directed by the Engineer- in -charge.Make:Netgear / TPlink / Dlink
5
-
-
... More
Supply , Installation, testing , commissioning of Casing Box for Bullet Cameras etc. complete in all respect as directed by the Engineer- in -charge.Make:Custom
5
-
-
... More
Supply , Installation, testing , commissioning of 5 Mtrs HDMI Cable etc. complete in all respect as directed by the Engineer- in -charge.Make:MX / Belkin / Kramer
4
-
-
... More
Supply , Installation, testing , commissioning of 43" Smart LED TV etc. complete in all respect as directed by the Engineer- in -charge.Make:Samsung / LG / Sony
4
-
-
... More
Supply , Laying, testing & commissioning of CAT6 cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Tyco /
9500
-
-
... More
Supply , Installation, testing , commissioning of Bird Canopy etc. complete in all respect as directed by the Engineer- in -charge.Make:Custom
5
-
-
... More
DATA System Description
-
-
-
... More
Supply , Installation, testing , commissioning of CAT6 24 Port Patch Panel etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Amp / Dlink
5
-
-
... More
Supply , Installation, testing , commissioning of CAT6 Patch Cord 1 Mtr etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Amp / Dlink
160
-
-
... More
Supply , Installation, testing , commissioning of 24 port 10/100/1000 Mbps, 24 Port Gigabit Switch with 2 SFP Ports etc. complete in all respect as directed by the Engineer- in -charge.Make:Netgear / Linksys / Dlink
5
-
-
... More
Supply , Installation, testing , commissioning of RJ45 information outlet with box and cover etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Amp / Dlink
160
-
-
... More
Supply , Laying, testing & commissioning of CAT6 cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used etc. complete in all respect as directed by the Engineer- in -charge.Make:Molex / Tyco
11679
-
-
... More
Digital EPABX System with 4 P&T and 32 extensions
-
-
-
... More
Supply , Installation, testing , commissioning of Digital EPABX system with 184 port CPU with MDF & SMPS etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
1
-
-
... More
Supply , Installation, testing , commissioning of 4 line P&T Card etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
1
-
-
... More
Supply , Installation, testing , commissioning of 4 line Digital Extension Card etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
1
-
-
... More
Supply , Installation, testing , commissioning of 8 line extention card etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
5
-
-
... More
Supply , Installation, testing , commissioning of Lightening Protector for each P&T Line etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
5
-
-
... More
Supply , Installation, testing , commissioning of Digital Key phone etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
2
-
-
... More
Supply , Installation, testing , commissioning of 64 keys DSS etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
1
-
-
... More
Supply , Installation, testing , commissioning of Electronics push button telephone Type : M-51 etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
66
-
-
... More
Supply & installation of RJ11 socket with casing box and face plate etc. complete in all respect as directed by the Engineer- in -charge.Make:Crystal/Accord/ Matrix
66
-
-
... More
Supply , Installation, testing , commissioning of 40 Port junction box with strip connectors etc. complete in all respect as directed by the Engineer- in -charge.Make: Custom
2
-
-
... More
Supply , Installation, testing , commissioning of 200 Port junction box with strip connectors etc. complete in all respect as directed by the Engineer- in -charge.Make:Custom
1
-
-
... More
Supply , Installation, testing , commissioning of 20 pair, 0.5 sq. mm. telephone cable in PVC Pipe/Casing caping per mtr. of cable used etc. complete in all respect as directed by the Engineer- in -charge.Make:Polycab / AKG
655
-
-
... More
Supply , Installation, testing , commissioning of 4 core, 0.5 sq. mm. telephone cable in PVC Pipe/Casing caping per mtr. of cable used etc. complete in all respect as directed by the Engineer- in -charge.Make:Polycab / AKG
7000
-
-
... More
CATV system Backbone ConnectivityDescription
-
-
-
... More
Supply , Installation, testing , commissioning of TV socket wih base & cover completeetc. complete in all respect as directed by the Engineer- in -charge.Make:Finolex/ Polycab/ Havels
12
-
-
... More
PUBLIC ANNUANCIATION SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 16 zone,voice alarm controller with USB, MP3 player (including 16 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required . Make:Honeywell/Bosch/Bose/Eq make
1
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make:Honeywell/Bosch/Bose/Eq make
2
-
-
... More
Supplying, installation, testing & commissioning of wall mounted loud speaker, 12 Watt in ABS enclosure complete as required .Make:Honeywell/Bosch/Bose/Eq make
60
-
-
... More
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits.Finolex/ Polycab/ Havels
1500
-
-
... More
FIRE FIGHTING SCHEDULE OF QUANTITIES
-
-
-
... More
A. FIRE PUMP HOUSE
-
-
-
... More
Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant / sprinkler pump, suitable for automatic operation consisting of the following:Kirlosakr/Wilo/Eq make
a) Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard (as per safety norms enclosed), as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280 LPM at outlet head of 70 mts to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
-
-
-
... More
a. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
b. Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.
c. Common base plate for (a) and (b) from M.S. Channel for required size.
d. Suitable cement concrete foundation with cement concrete plaster (design and drawing to be provided by the Contractor while the foundation will be done by the client) complete with anti-vibration arrangement of cushy foot mountings.
1
-
-
... More
DIESEL DRIVEN (for standby pump)
-
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date.
Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard (as per safety norms enclosed), as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280LPM at outlet head of 70 mts. to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
a. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
b. Heat exchanger cooled (secondary cooling) diesel engine of speed 2050 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required.
c. Common base plate for (a) and (b) from M.S. channel of required size.
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by client) complete with antivibration arrangement of cushy foot mountings.
1
-
-
... More
Supply, installation, testing and commissioning of jockey pump (pressurisation pump) comprising of the following:
a. Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required. Jockey pump shall be of stainless steel construction.
The pump head and base shall be CI GG20 construction and impellers, diffusers, shaft sleeve, seal bush & pump shaft shall be in SS 304 material. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side (The pump should meet the condition and shall be gotten approved by the Local fire Authority).
b. Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with a synchronous speed of 2900 R.P.M. with flexible coupling and coupling guard etc. as required.
c. Common base plate for (a) and (b) from M.S. channel as required size.
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with Antivibration arrangement of cushy foot mounting.
For pump defined above & of duty as follows :
For Hydrant & Sprinkler System
-
-
-
... More
Flow : 180 LPM, Head : 70 mts
1
-
-
... More
Providing & fixing MS Class ‘C’ 100 mm dia diesel engine exhaust pipe (including all fittings, clamps, steel support) for the engine. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope.
6
-
-
... More
Providing, fixing, testing and commissioning of precharged air vessel (size 250 mm dia &1200 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, 50 mm dia inlet with isolating valve duly painted from inside and outside complete as required.Make- Leader/Newage/Equivalent
2
-
-
... More
Providing & fixing dial type (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
4
-
-
... More
Supply, installation testing and commissioning pressure switch assembly with interlocking of pumps.
3
-
-
... More
Providing and fixing 25 mm dia gun metal fitting for water level indicator gauge with isolation valve at top and bottom, heavy guage transparent polythylene tube of approx. 5 m length with colour indicator float clamped to teak board 100 mm wide x20 mm
2
-
-
... More
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.Zindal/Tata/Eq make
-
-
-
... More
200 NB
12
-
-
... More
150 NB
12
-
-
... More
100 NB
6
-
-
... More
80 NB
6
-
-
... More
50 NB
6
-
-
... More
25 NB
6
-
-
... More
Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position make-Kartar/Zoloto/H-sarker
-
-
-
... More
200 NB
1
-
-
... More
150 NB
4
-
-
... More
80 NB
2
-
-
... More
Providing, installing and commissioning C.I. flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete (ISI). 150 mm make-Kartar/Zoloto/H-sarker/Emerald
2
-
-
... More
80mm
1
-
-
... More
Supplying, installing, testing and commissioning of Cast Iron Non-return(REFLUX) VALVES, FLANGED ENDS IN SWING TYPE DESIGN, with Gun Metal Seat as per standard confirming to IS:5312,PN1.6 with required flanges, nuts, bolts and gaskets etc. complete. Make.Kartar/L&T/Zoloto/Eq make
-
-
-
... More
150 NB
2
-
-
... More
80 NB
1
-
-
... More
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. Make. Audco/Zoloto/Eq make
-
-
-
... More
150 NB
2
-
-
... More
80 NB
1
-
-
... More
50 NB
1
-
-
... More
Providing and installation of GM Ball Valve, IS-318 LTB-2 SS Stem AISI 410, Ball SS 304/CF8, teflon gland packing, screwed female threads to IS-554,
-
-
-
... More
25 NB
12
-
-
... More
15 NB
6
-
-
... More
Providing & fixing SS fire brigade suction hose coupling (draw-out connection) with nut for female coupling as per IS standards complete with 1 No. B. F. Valve, 1 no. NRV and 2 Nos.100 mm dia GI/MS suction pipe and 2 nos. 100 mm dia foot valve to be connected to static tank. Provision of GI/MS drop pipe and foot valve shall be made in all the fire water static storage tanks (GI/MS pipe to be paid separately through appropriate item while cost of foot valve 1 no. BF Valve, NRV also to be included).4 way:. Omex/Newage/Minimax
2
-
-
... More
Providing and fixing electrically operated dual type pressure switches with threaded connection for a pressure vessel, complete suitable for 0-15 Kg/Sq.cm model IPS.
3
-
-
... More
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia as per IS 12992 rated for 20 Kg/Sq.cm incluing 25 mm dia GM Ball Valve as per IS-318 LTB2
3
-
-
... More
Providing and Installation of vibration elimination pads for pumps.
-
-
-
... More
Type B ( Main fire pumps)
8
-
-
... More
Type C (for diesel driven pump)
6
-
-
... More
ELECTRICAL INSTALLATION FOR FIRE PROTECTION SYSTEM
-
-
-
... More
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, earthing wire (in accordance to specification) with earthing from panel to each motor / equipment.(L&T/Hager/Siemens/Legrand/Eq make)
-
-
-
... More
MCC as described above Including neccessary cables.
1
-
-
... More
B. FIRE HYDRANT SYSTEM INTERNAL & EXTERNAL (RISERS / YARD & TERRACE RING )
-
-
-
... More
Providing and fixing of weather proof standard HOSE
CABINATE ( 0.75 M x 0.6 M x 0.3 M ) having central
opening glazed door with 6 mm thick clear glass including
necessary locking arrangement with Allan key, power
coating with PO red paint and for housing 2 nos. RRL
hose pipe, 1 NO branch pipe. as reqd. Make. Omex/Newage/Minimax
15
-
-
... More
Providing 63mm dia 15 m long reinforced rubber lined hose pipe conforming to IS: 6361992 Part-II with gunmetal male & female coupling wire wound with pipe as required . Make. Omex/Newage/Minimax
30
-
-
... More
Providing and fixing Single headed hydrants flanged inlet with 63 mm female instantaneous outlet of gunmetal complete with male blank caps, chains conforming to IS:5290 type A with stainless steel orifice plate (if required) to keep the pressure not more than 3.5 kg/sq.cm at any point. Make. Omex/Newage/Minimax
15
-
-
... More
Providing and fixing Gunmetal branch pipe with 20mm dia nozzle conforming to IS:903. suitable for installation connections to hose coupling etc. as required.
15
-
-
... More
Providing & fixing swinging type First Aid hose reel in red colour drum with 36 mts long and 20 mm dia heavy duty rubber water hose, (IS:778, class - II) terminating with G.M. coupling & nozzle of 6mm outlet with shut off valve confirming to IS 8090 - 1976 complete with MS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastner, bolts & nuts conforming to IS:884-1985 (Reaffirmed 2000) complete in all respects. Make. Omex/Newage/Minimax
9
-
-
... More
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.
-
-
-
... More
80 mm dia
18
-
-
... More
150 mm dia
400
-
-
... More
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. Make. Audco/Zoloto/Eq 80mm dia
9
-
-
... More
Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position make-Kartar/Zoloto/H-sarker: 150mm dia
2
-
-
... More
100mm
3
-
-
... More
Supplying, installing, testing and commissioning of Cast Iron Non-return(REFLUX) VALVES, FLANGED ENDS IN SWING TYPE DESIGN, with Gun Metal Seat as per standard confirming to IS:5312,PN1.6 with required flanges, nuts, bolts and gaskets etc. complete. Make.Kartar/L&T/Zoloto/Eq make:150mm dia
2
-
-
... More
TERRACE PIPING & ACCESSORIES
-
-
-
... More
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification. 100mm dia
18
-
-
... More
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. Make. Audco/Zoloto/Eq make. 100mm dia
2
-
-
... More
Supplying, installing, testing and commissioning of Cast Iron Non-return(REFLUX) VALVES, FLANGED ENDS IN SWING TYPE DESIGN, with Gun Metal Seat as per standard confirming to IS:5312,PN1.6 with required flanges, nuts, bolts and gaskets etc. complete. Make.Kartar/L&T/Zoloto/Eq make:100mm dia
2
-
-
... More
C. SPRINKLER SYSTEM
-
-
-
... More
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.
-
-
-
... More
a) 25 mm dia
1660
-
-
... More
b) 32 mm dia
540
-
-
... More
c) 40 mm dia
360
-
-
... More
d) 50 mm dia
220
-
-
... More
e) 65 mm dia
90
-
-
... More
f) 80 mm dia
178
-
-
... More
g)100 mm dia
199
-
-
... More
Providing, fixing, jointing and testing in position the for drainage purpose following medium class (Class B) G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers, flanges & plugs etc. fixing at wall / ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification. Threading, jointing, and making proper connections, cutting hole in wall / floor / slab and making good the same.
Welding of any kind on the galvanized support / hanger shall not be permitted.
-
-
-
... More
a) 80 mm dia
12
-
-
... More
15mm dia. Chrome finished sprinkler head as per IS:9972 with standard response 5mm quartz bulb and to operate at 68°C (of K-Factor 80) complete as per given specifications.(UL Listed/FM Approved) (HD/Tyco/viking)
-
-
-
... More
a) Pendent type
550
-
-
... More
b)upright type
550
-
-
... More
C) Side wall type
90
-
-
... More
1000mm flexi drop for sprinkler
550
-
-
... More
Providing and Fixing electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 Nos. NONC.
-
-
-
... More
100 /80 mm dia
6
-
-
... More
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. Make. Audco/Zoloto/Eq 100mm dia
6
-
-
... More
80mm dia
3
-
-
... More
65mm dia
3
-
-
... More
50mm dia
3
-
-
... More
Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge.
1
-
-
... More
Portable Chemical Fire Extinguishers
-
-
-
... More
Providing and Installation of CO2 type Fire Extinguisher 4.5 ltrs capacity fitted with Gun Metal cap and nozzle and wall suspension brackets confirming to IS:940 complete with initial refill consisting of ISI marked CO2 gas cartridge of 60 gms. Capacity conforming to IS: 4947
43
-
-
... More
Providing and Installation of Mechanical Foam type Fire Extinguisher 09 ltrs capacity fitted with Gun Metal cap along with wall bracket confirming to IS: 10204 complete with initial refill consisting of ISI marked CO2 gas cartridge of 60 gms capacity conforming to IS: 4947 and ISI marked AFFF conforming to IS: 4989. for Fire Pump room
2
-
-
... More
Providing and Installation of ABC 6 KG CAP type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket
18
-
-
... More
FIRE DETECTION SYSTEM:Honeywell/Bosch/Eq make
-
-
-
... More
SITC of 4 Loop Panel expandable upto 8 Loops Micro processor based 2 wire fault tolerant loop,with inbuilt network port (each loop accessing 99 detectors and 99 modules ) fire alarm/detection control panel. The Panel shall have 10000 event log history . Panel shall be capable of having 1600 configurable zones .The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFFrespective control module when ever any alarm is triggered. The panel shall have 7 Inch Touch Screen unit to indicate Fire/Fault Signal with address and analog output, external printer to log all fire or fault events complete in all respects.The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have provision for 40 Zones with Individual LED Indicators expdable upto 200 Zones. The panel shall have a built in power supply and battery charger along with maintenance free 38 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required.and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54/UL/VDS/Applus The panel shall support detection logics like coincidence & verification detections for the false alarm management. The Panel shall adjust the sensitivity between day and night to maintain the better detection/reponse time.The panel shall have plug in connectors/terminals for the quicker installation/maintanance. The Panel shall be cpabale of programming through PC ; Touch Screen of USB .
1
-
-
... More
Supply, Installation, testing and commissioning of intelligent addressable Multi detectors
450
-
-
... More
Supply, erection, testing & commissioning of Manual call point in sheet steel box with hammer & chain.
6
-
-
... More
Supply Installation testing and commissioning of flasher cum electronic hooter (Loop powered)
6
-
-
... More
CABLES & ACCESSORIES
-
-
-
... More
Supply of 2X1.5 sq.mm PVC insulated copper wirs ISI marked on wall/celling in concealed BEMS pipe for connection of smoke detectors inclufing termination of cables by socking, mending good, etc as required.Armour cable
1400
-
-
... More
SIGNAGES
-
-
-
... More
Exit, WAY TO EXIT, FIRE EXTINGUISHERS, HOSE REEL SIGNAGES
150
-
-
... More
FLOOR MOUNTING ESCAPE TAPES
600
-
-
... More
P.H. WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
90
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
135
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
15
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
200
-
-
... More
In 1st Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
160
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
230
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
20
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
20
-
-
... More
In 2nd Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
200
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
290
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
50
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
20
-
-
... More
In 3rd Floor
-
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
200
-
-
... More
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
300
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
250mm thick wall in Ground floor
15
-
-
... More
In 1st Floor
20
-
-
... More
In 2nd Floor
30
-
-
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
15
-
-
... More
In 1st Floor
18
-
-
... More
In 2nd Floor
25
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
225
-
-
... More
In 1st Floor
390
-
-
... More
In 2nd floor
490
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge.
250mm to 375mm thick wall
-
-
-
... More
in Ground Floor to 3rd Floor
140
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
16
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
106
-
-
... More
15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
10
-
-
... More
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
6
-
-
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
32
-
-
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
32
-
-
... More
15mm dia CP extension piece
164
-
-
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
28
-
-
... More
25mm dia G.M or Brass F.W valve (Sakti make)
25
-
-
... More
40mm dia G.M or Brass F.W valve (Sakti make)
10
-
-
... More
125mm dia CP gratings
98
-
-
... More
15mm CP revolving shower (Jaquar)CON-CHR-209KN
16
-
-
... More
15mm dia CP auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)
12
-
-
... More
50mm dia G.M or Brass F.W valve (Sakti make)
10
-
-
... More
15mm dia CP single lever Basin Mixture (ALI-IVC-85011B.)
13
-
-
... More
15mm dia CP wall Mixture (APR-ESS-101267)
5
-
-
... More
Elbow action Bib cock(Jaquar)FLR-SSF-5043N
15
-
-
... More
15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N
10
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
10 litres PVC L.L. Cistern (Slimline-white)
29
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing C.I.(Hubeless)soil waste ventilating pipes and fittings of the following with suitable clamps having provision for removal diameter conforming to ISI No. 15905 to walls with shelded(S/S) coupling with EPMD rubber gasket method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
75mm dia C.I. pipe (NECO make)
200
-
-
... More
75mm C.I. plain bend(NECO make)
20
-
-
... More
75mm C.I. plain Y (NECO make)
10
-
-
... More
100mm dia C.I. pipe (NECO make)
1000
-
-
... More
100mm C.I. door bend(NECO make)
10
-
-
... More
100mm C.I. door Tee(NECO make)
120
-
-
... More
100mm C.I. Plain Tee(NECO make)
30
-
-
... More
100mm C.I. Plain Y junction(NECO make)
40
-
-
... More
100mm C.I. offset(NECO make)
36
-
-
... More
100mm C.I. plain bend(NECO make)
68
-
-
... More
100mm C.I. cowl(NECO make)
36
-
-
... More
100mm C.I. P trap(NECO make)
80
-
-
... More
100mm S/S coupling with EPMD
500
-
-
... More
75mm S/S coupling
100
-
-
... More
W/C connector
42
-
-
... More
S/S/G.I.Clamp
600
-
-
... More
100mm C.I. door Cross Tee(NECO make)
8
-
-
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)
-
-
-
... More
580mm size Orissa pan(Hindware/Parryware/Jauar)
10
-
-
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Halfstall Urinal(Parryware/Hindware/Jauar)
12
-
-
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing of squatting urinal (Parryware/Hindware/Jauar)
6
-
-
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
E.W.C. with seat cover (Parryware/Hindware/Jauar)
19
-
-
... More
One piece commod(Hindware)ELEMENT Cat No.92084.
13
-
-
... More
EWC(Matrix set)No.70002(P-18)
3
-
-
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Jauar)
2
-
-
... More
Under Counter basin(560x450)Hindware-No.10095
28
-
-
... More
Halfpedestal basin(560x450)Hindware No.91049+91115
13
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
600mm x 450mm size B.E mirror
2
-
-
... More
Large size mirror with frame(70x0.90x0.90)
-
-
-
... More
28x0.90x0.90=
22.68
-
-
... More
Design mirror(Parryware)
13
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P
15
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
29
-
-
... More
CP towel Ring(Jaquar)ACN-ACR-1121N
28
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Jaquar)ACN-ACR-1131N
60
-
-
... More
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
13
-
-
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 450 x 250mm size S/S kitchen sink (Jayana make )
15
-
-
... More
Laboratory Sink 450x300x150 mm
15
-
-
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
22.33
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
7.44
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. In Ground Floor
7.44
-
-
... More
In 1st Floor
11.73
-
-
... More
In 2nd Floor
13.38
-
-
... More
Supplying all materials, labour, T&P and providing cement flush pointing with C.M (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
259.31
-
-
... More
In Ist Floor
381.23
-
-
... More
In 2nd Floor
467.08
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ist Floor
153.77
-
-
... More
In 2nd Floor
176.64
-
-
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
-
-
-
... More
In Ist Floor
153.77
-
-
... More
In 2nd Floor
176.64
-
-
... More
Supplying all materials, labour, T&P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ist Floor
35.2
-
-
... More
In 2nd Floor
40.18
-
-
... More
Supplying all materials, labour, T&P and providing Vetrified mat finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc complete as per direction of the Engineer in charge. (vitrified tiles of size 600x600 of make- Kajaria/Somany/Johnson/Orient Bell/Rak plain/printed series to be pre-approved by the Engineer in charge)
In Ground Floor(Kajaria-Fogparla or equivalent make)
74.44
-
-
... More
In 1st Floor
117.31
-
-
... More
In 2nd Floor
133.92
-
-
... More
Supplying all materials, labaour, T&P and fixing ceramic glazed tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer-in-charge.(ceramic vitrified Glazed tiles in wall of size 600x300 ) of make Kajaria/Somany/Johnson/Orient Bell/Rak) plain/printed series to be pre-approved by the Engineer-in-charge. in Ground Floor(Kajaria-Durenmarfil or equivalent make)
-
-
-
... More
In Ground Floor
430.58
-
-
... More
In Ist Floor
420.42
-
-
... More
In 2nd Floor
230.37
-
-
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
-
-
-
... More
54x0.75x2.10=
3x1.05x2.10=
91.67
-
-
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
-
-
-
... More
54x4.95=
3x5.25=
283.05
-
-
... More
Finishing wall surface of walls with providing two coats wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
-
-
-
... More
In Ground Floor
208.91
-
-
... More
In Ist Floor
309.93
-
-
... More
In 2nd Floor
299.08
-
-
... More
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
208.91
-
-
... More
In Ist Floor
309.93
-
-
... More
In 2nd Floor
299.08
-
-
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
20
-
-
... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 760mm x 760mm x 460mm
18
-
-
... More
Fitting and fixing RCPC cover slab (0.45m dia)
18
-
-
... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
37.8
-
-
... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
91.8
-
-
... More
Construction of 4x5000 Liters RCC Over head Tank in third floor with RCC Stagging(Domestic & Fire fighting)
-
-
-
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement and shuttering.
-
-
-
... More
Column- 6x0.25x0.25x0.75
0.28
-
-
... More
Beam- 2x(6.5+4.0)x0.25x0.50
2.63
-
-
... More
Base Slab - 1x6.50x4.00x0.15
3.9
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
-
-
-
... More
@ 130 kg / cum =
8.85
-
-
... More
Supplying all materials, labour,T&P and providing Brick Masonary work in cement morter (1:4) using fly ash bricks work including watering curring and conveyance of all materials to site.
4.73
-
-
... More
Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:4) over BM work including watering curring and conveyance of all materials to site.
37.8
-
-
... More
Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete
60
-
-
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
-
... More
Supplying all materials,labour,T&P and fixing Rotational moulded three lyer polyethylene cylindrical vertical water storage tanks ( white colour)conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel/PVC tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position. conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
5000litre capacity water storage tanks
4
-
-
... More
RO Plant
-
-
-
... More
Supply, installation, testing and commissioning of package type RO plant complete with pre-treatment system NGMF-20 comprising of 01 no of feed water pumps, dosing systems, RO membrances, RO high pressure pumps, 01 No of 1000 liters SS Treated water storage tank etc complete. The unit shall have all interlocking for safe operation of plant. The unit shall have skid mounted electrical panel complete with required starters and shally also have all Annuanciation and Controls. The piping shall be heavy duty PVC. The filter shall be FRP and pumps shall be of SS/CI construction. The basis of design shall be for feed water inlet TDS of 1200 PPM. Contractor is suggested to cary out the feed water chemical analysis and ensure suitability of RO plant operation. Make- Ion Exchange, Thermax
1
-
-
... More
EXTERNAL PH WORK
-
-
-
... More
Sinking of 200 mm dia (8") Gravel Packed Production Well including saline sealing where necessary through Rotary Drilling Rig 300 Mtrs with PVC/ GI Casing Pipes- 2 Nos.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion.
-
-
-
... More
00 mtrs. to 100 Mtrs.
200
-
-
... More
Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials.
-
-
-
... More
00 mtrs. to 300 Mtrs.
200
-
-
... More
Cost of 200mm dia PVC schedule - 80 pipe
201
-
-
... More
Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
2
-
-
... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing ( excluding cost of cement which willbe supplied by the Department )
2
-
-
... More
Supplying all labour,T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc complete as per the direction of the Engineer-in-Charge.
2
-
-
... More
Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-Charge
2
-
-
... More
Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition.
200
-
-
... More
Supplying all materials, labour, tools and plant and and storing in proper way and utilising the same as per direction of Engineerin-charge.
-
-
-
... More
Cost of 200 mm dia PVC Pipe
201
-
-
... More
Cost of cement
12
-
-
... More
Cost of sand
4
-
-
... More
washed gravel
4
-
-
... More
Cutting slots in casing pipe
20
-
-
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
5HP Three Phase 5 stage submersible pump set.
2
-
-
... More
DOL control panel
2
-
-
... More
50mm S. S. Nipple, S. S. bolt & clips
4
-
-
... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
2
-
-
... More
2.50mm Sqm Submersible flat cable
300
-
-
... More
Steel rope with cover
120
-
-
... More
20mm dia rigid U-PVC pipe
60
-
-
... More
50mm dia HDPE pipe
120
-
-
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
-
... More
Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
5 HP 3 phaseHorizontal submerssible pump set.
2
-
-
... More
DOL control panel
2
-
-
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
-
... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge
-
-
-
... More
75mm dia PVC ASTM
30
-
-
... More
50mm dia PVC ASTM
300
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge
-
-
-
... More
50mm dia CPVC pipe (sch-80)
10
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
-
-
-
... More
300m x 0.45m x 0.60m =81.00
81
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
... More
50mm dia Brass N. R. Valve
3
-
-
... More
50mm dia Brass Check Valve
1
-
-
... More
50mm dia Brass F. W. Valve
4
-
-
... More
Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 250mm x 250mm x 560mm
4
-
-
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 910mm x 910mm x 910mm
10
-
-
... More
Addl depth
10
-
-
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
1.40m dia x 2.00m deep
2
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
100
-
-
... More
160mm dia u-pvc pipe alround concrete
150
-
-
... More
200mm dia u-pvc pipe alround concrete
300
-
-
... More
Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm
10
-
-
... More
Cost of RCPC Cover
10
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquagurd Pure Chill 120 PSS UV
4
-
-
... More
Construction 100 users RCC Septic tank- 2 Nos.
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
118.8
-
-
... More
- do - with addl. Depth of 1.5 m
75.24
-
-
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
6.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
55.74
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Roof slab
74.3
-
-
... More
For RCC wall
256.8
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
44.6
-
-
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
167.64
-
-
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
4
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
20
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
21.6
-
-
... More
Rain water harvesting.-2 Nos.
-
-
-
... More
Sinking of tube well through D.T.H.Rig.
-
-
-
... More
200mm dia- 0.0m to 30.00m
50
-
-
... More
Lowering of PVC casing pipe inside bore.
-
-
-
... More
200mm dia- 0.0m to 30.00m
50
-
-
... More
Cost.of 200mm dia (Sch.80)Pipe
50
-
-
... More
Cutting slot in casing pipe for recharge of rain water
50
-
-
... More
Labour for packing gravel outside the tube well
-
-
-
... More
2x25.0mx22/28{(0.40)²-(0.20)²}=9.40
4.71
-
-
... More
Cost of washed gravel.
4.71
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
133.38
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2.17
-
-
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
22.8
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
182.4
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
97.2
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.26
-
-
... More
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.84
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.68
-
-
... More
Providing and filling filter media
-
-
-
... More
40mm size bolder-2x6.0x2.50x0.85=
25.5
-
-
... More
20mm size washed gravel-2x6.0x2.50x0.40=
12
-
-
... More
Course sand-2x6.0x2.50x0.30=
9
-
-
... More
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
6
-
-
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 910mm x 910mm x 910mm
12
-
-
... More
Addl depth
12
-
-
... More
Cost of RCPC Cover
12
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
160mm dia u-pvc pipe alround concrete
150
-
-
... More
200mm dia u-pvc pipe alround concrete
150
-
-
... More
Construction of 150000 Liters RCC UGR for Fire Fighting, 50000 ltrs UGR for Domestic use and Pump House of Inside size- 12.00 X 7.500 X3.50m
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
198.72
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
52.99
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
35.64
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
35.64
-
-
... More
R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Base slab
31.75
-
-
... More
RCC Wall
55.44
-
-
... More
RCC Lintle
0.22
-
-
... More
Roof Slab -
21.43
-
-
... More
Beam -
0.8
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
-
-
-
... More
@ 100 kg / cum =
109.16
-
-
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
4.71
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
-
-
-
... More
In side
487
-
-
... More
Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:4) over Brick work including watering curring and conveyance of all materials to site.
92.51
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
311.4
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
200
-
-
... More
Supplying and fitting and fixing MS door and windows with grill including welding with elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
300
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
3
-
-
... More
Solar Water heating System for Cancer Hospital Balasore 5000 ltrs Capacity
-
-
-
... More
Supply of Solar flat plate Collectors.of make Supreme Solar/Greentek India/ Radient Energy or equivalant as per direction of Engineer in charge.
40
-
-
... More
Supply of 35Kw 1000LPD/Hr Air Sorce Heat Pump ofmake Thermex/Brio/Neo or equivalant as per direction of Engineer-in-Charge.
1
-
-
... More
Supply of Hot Water insulated pressurized Storage Tank made out of stain less steel SS304grade–2500 ltrs capacity of make Parkland/Radient or equivalant as per direction of Engineer-in-charge.
2
-
-
... More
Supply of NonreturnvalveandSSfittings., 2 nos of Circulation cum pressure pump of make WILO/ GROUNDFOUS with 4 nos Electrical Backup Heater(6KW) internal Kitech pipes and fittings, 40 nos MS power coated Stand for fixing of solar plates etc. as per requirement at siteetc complete as per direction of Engineer-in-charge.
1
-
-
... More
Installation of all the above materials on the roof including fitting and fixing of Insulated tank, circulating pump, back-up heater, piping arrangement etc complete with functioning of solar water heating system etc complete as per standard specification and direction of Engineerin-charge
1
-
-
... More
MEDICAL GAS PIPELINE SYSTEM FOR CANCER HOSPITAL, BALASORE
-
-
-
... More
OXYGEN SYSTEM
-
-
-
... More
Oxygen Gas Outlet Point
114
-
-
... More
SITC for Oxygen Outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Manifold 10+10 With Tail Pipe & Nrv
1
-
-
... More
SITC of oxygen manifold of Size (10 working + 10 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 20 nos. pig tail pipes. it should be suitable to withstand a working pressure of 145 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required. (Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Manifold 3+3 Emergency With Regulator
1
-
-
... More
SITC of oxygen manifold of Size (3 working + 3 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 6 nos. pig tail pipes. it should be suitable to withstand a working pressure of 130 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Fully Automatic- Control Panel
1
-
-
... More
SITC of fully Automatic pneumatically operated oxygen control panel. Visual indication of the manifold is provided by 3 guages within control panel, Indicating Pressure of the right & Left hand bank and the supply pressure from control panel to distribution system with sensing faciliteies to provide visual signals na other anciliary services such as heaters. Pannel should be fitted with audio alarm indication for changeover of empty cylinder. The entire manifold will be hydraulically tested at 130 Kg/Cm2 pressure, duly degreased foroxygen Service, and supplied in sealed cover, ready for assembly at site etc. complete as required.
(Note : Excluding Supply of cylinder.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Flow Meter With Humdifire Bottle
84
-
-
... More
SITC for Oxygen flowmeter complete with humidifier bottle, The flow meter must be constructed with chromium plated brass body, extremely robust, to take care of the day to day usage demand. Flow meter cartridge type knob : easy to maintain, offers optimum adjustment quality and superior designing and engineering to provide high level of accuracy, with no significant affect from restrictions caused by down-stream equipments. The flow meters should be 0-15 LPM range for oxygen. etc complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Adopter (Make:-Mediunited/Mellows/Unitrol)
114
-
-
... More
VACCUM SYSTEM
-
-
-
... More
Vaccum Gas Outlet Point
84
-
-
... More
SITC for Vacuum outlets as per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Vaccum Adopter .(Make:-Mediunited/Mellows/Unitrol)
84
-
-
... More
Ward Vaccum Regulator with 600ml jar
(Make:-Mediunited/Mellows/Unitrol)
85
-
-
... More
Vaccum Pump Cap:-10 Hp , make :- Anest Iwata
2
-
-
... More
The vacuum Pumps 02 Nos having shall fully meets and complied with NHS Health Technical memorandum (HTM02-01)/. Vacuum System shall ensure the minimum pipeline vacuum level of 745mmHg is maintained at the plant service connection point at the rated volumetric ‘free air’ flow rate with two pumps in standby. Vacuum Pumps- CFM -152.6,Motor power -7.4 Kw (10 HP) Oil Lubricated Reciprocating vacuum pumps with filtration system.
-
-
-
... More
Vacuum Receiver’s- 1 x 1000Liters(01 No) capacity vertical vacuum receiver. Vacuum receiver(s) shall be supplied with relevant test certificates and have a total volume of at least 100% of the plant output in 1 minute in terms of free air aspired at normal working pressure.
1
-
-
... More
COMPRESSED AIR SYSTEM
-
-
-
... More
Air Gas Outlet Point (4 Bar)
34
-
-
... More
SITC for Compressed M.Air- 4 Bar outlets as Per standards , Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Air Adopter(4 Bar) (Make:-Mediunited/Mellows/Unitrol)
35
-
-
... More
Oil Free Air Compressor , Cap:- 15 Hp, 57 CFM . Make:- Anest Iwata,& Accessories
2
-
-
... More
• Two stage two cylinder single acting reciprocating type air-cooled air compressor • ASSC. 15 HP electric motor foot mounted with starter,
• Cfm.- 57
• To remove maximum contamination and minimum pressure drop.
-
-
-
... More
Air Reciver,Cap-500Ltr The reviver assembly are be fitted with a pressure safety valve
1
-
-
... More
Desicant Air Dryer,Cap-60 CFM Dryer type-regenerative dessicant dryer,design pressure -13.2 bar g. Maximum air inlate temp.-65 degree C ,maximum pressure- 25 bar,pressure dew point -40 degree C
1
-
-
... More
Air Gas Outlet Point (7 Bar)
2
-
-
... More
SITC for Compressed S.Air- 7 Bar outlets as Per standards , Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Air Adopter(7 Bar) (Make:-Mediunited/Mellows/Unitrol)
2
-
-
... More
NITROUS OXIDE SYSTEM
-
-
-
... More
NITROUS Manifold 3+3 With Tail Pipe & Nrv
1
-
-
... More
SITC for (3working +3 Standby) size of N2O manifold complete with middle frame, chains, NRV's 6 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Manifold 2+2 Emergency With Regulator
1
-
-
... More
SITC for (2 working + 2 Standby) size of N2O manifold complete with middle frame, chains, NRV's 4 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Fully Automatic-Control Panel
1
-
-
... More
SITC for Fully Automatic pneumatically operated N2O control panel. With heater, The entire manifold will be hydraulically tested at 250 Kg/Cm2 pressure, duly degreased , etc complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Gas Outlet Point
2
-
-
... More
SITC for Nitrous Oxide outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Adopter (Make:-Mediunited/Mellows/Unitrol)
2
-
-
... More
Distribution Copper Pipe Lolldy certified EN: 13348,Make:-Janya/Mandev
-
-
-
... More
SITC for Medical Grade copper pipe with required copper fittings, All pipes shall be drawn half hard temp., solid drawn, seamless, phosphorous deoxidised, non-arsenic and degreased copper pipe conforming to EN BS: 13348:2008/ASTM B819 standard ,EN 1057:1996 (originally BS 2871-1971 Part 1 (Table X) and chemical composition as per BS-6017 of 1981 table 2, The supplies of copper pipe would be accompanied with manufacturers test certificate for the physical properties of copper pipes and their Chemical composition. The supply of pipes be further substantiated with inspection certificate from the third party like SGS/Lloyds Register. etc. complete as required.(MAKE:-Rajco Metals/Janya Extrusion/Mandev tube/Maxflow)
-
-
-
... More
Copper Pipe 12 MM x0.7 OD
700
-
-
... More
Copper Pipe 15 MM x 0.9 OD
700
-
-
... More
Copper Pipe 22 MM x 0.9 OD
1400
-
-
... More
Copper Pipe 28 MMx 0.9 OD
820
-
-
... More
Copper Pipe 42 MMx 1.2 OD
120
-
-
... More
Copper fittings for copper pipes (MAKE:-Rajco Metals/Janiya Extrusion/Mandev tube/Maxflow)
-
-
-
... More
Isolation Valve service (MAKE:-MATRIX)
-
-
-
... More
Isolation Ball Valve 12 MM
10
-
-
... More
Isolation Ball Valve 15 MM
10
-
-
... More
Isolation Ball Valve 22 MM
10
-
-
... More
Isolation Ball Valve 28 MM
10
-
-
... More
Isolation Ball Valve 42 MM
4
-
-
... More
Zonal Valve Service ( Valves with Box)(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Valve With Valve Box 2 Gas
4
-
-
... More
Valve With Valve Box 3 Gas
2
-
-
... More
Valve With Valve Box 5 Gas
2
-
-
... More
Area Alarm service (Make:-Mediunited/Mellows/ Unitrol)
-
-
-
... More
Area Alarm System 2 Gas
4
-
-
... More
Area Alarm System 3 Gas
2
-
-
... More
Area Alarm System 5 Gas
2
-
-
... More
Bed Head Panels (Size - 1000 X 300 X 110 mm) (Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Pure extruded aluminium made with powder coat finish, Provision for 4 Nos gas outlets (2nos Oxygen,1 Nos Vaccum, 1 Nos Air) & 4 Nos of electrical switches & sockets ( 6/16 Amp)
10
-
-
... More
Kit conversion for Nitrous Oxide
2
-
-
... More
Kit conversion for Oxygen
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements