Rural Development Department Tender

Unit-Rmt Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre as per Clause No.202 of MoRT&H specifications for Road and Bridge works (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-Charge.

Unit-Sqm Milling of bituminous pavement to obtain uniform surface as per IRC SP -76 depth of up to 50 mm including levelling using cold milling machine and slope sensors, self-loading of milled material by discharge conveyor including lead up to 10 km and unloading of the materials at specified location as per direction of the Engineer-in-Charge

Unit-Cum Providing and laying White Topping as per IRC . SP 76 over bituminous surface prepared surface done by milling and cleaning or levelling course with bituminous mix or concrete mix as required or as shown in drawing to correct surface profile or short panel concrete pavement over prepared base with pavent quality concrete (PQC) mixed in batching plant with weight batching facility as per approved mix design as per IRC. 44 to acheive minimum flexural sterength of concrete of 4.50 Mpa at 28 days, transported to site by transit mixer, laid with sensor paver finisher spread, vibrate compacted and finished in continued operation to the lines and grades with contraction joint and longituidinal joint (including dowel bars and ties bars as per clause no 602.2.8 as per drawing, texturing & timing as per clause no 602.9.11 of MoRT&H specification, 5th revision) of surface curing as per clause no 602.9.12 saw cutting to a depth of 1/3 to 1/4 of WT slab width 3mm-4mm and grid as per design and drawing within the specified time (Saw cutting deemed to be included in the item and providing texturing over the finished surface) including cost of formwork, labour, plant and machineries etc complete as per specification.