Rural Development Department Tender

Providing & laying 75mm compacted thickness of WBM specification with following size of IRC Grade-III metal consolidated with PRR of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance royalty & taxes of all materials required for the work with cess etc complete in all respect as per specification and direction of the Engineer-in-charge.

Providing and applying tack coat over the metalled surface of penetration grade of bitumen using 0.4 kg pr sqm. after scrapping clearing the road surface with cost conveyance royality T &P taxes of bitumen & other all materials including hiire and running charges of Bitumen boiler and labour charges as required for the item of work etc complete including cess as per specification & direction of Engineer-in-charge.

Providing and laying semi dense bituminous concrte with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler with all lifts and leads, transporting to site by mechanical means within a lead of spreading, grading to required slope and compacting to meet requirement of specification for Road and Bridge works with cost of labour, T&P, cess etc. complete as per direction of the Engineer-in-Charge.

White washing two coats with good shell lime of approved quality over the parapet walls and tree trunks including preparation of clearing, scraping, cost with labour, T&P & Cess etc required for the work complete as per direction of E.I.C.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing as per Clause 1701.2.2 of MoRD and as per direction of Engineer-In-charge.

Providing fitting and fixing of Road sign Board including all cost and conveyances of all materials and taxes and royalties etc. with all labour, cess and T&P required for the work complete including side shuttering as per direction of Engineer-in-charge.

Supplying and fixing 15 cm dia 1.00 m long guard post of RCC M20 using 3.5 kg. of steel for each guard post with 20mm down graded granite chips includng cost of materials, reinforcement, centering, shuttering and watering, cost and conveyances of all materials and taxes and royalties etc. with all labour, cess and T&P required for the work complete including side shuttering as per direction of Engineer-in-charge.

Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2mm thick MS Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MoRD specifications of required shade and colour. Supported and delded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened including all cost and conveyances of all materials and taxes and royalties etc. with all labour, cess and T&P required for the work complete including side shuttering as per direction of Engineer-in-charge.

Earthwork in excavation of foundation in hard soil including dressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost of labour including cess and T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge.

Supplying and filling in foundation & plinth with sand including watering and ramming with cost, conveyance, royality taxes of all materials, and labour with T&P required for the work including cess etc complete. (Measurement will be taken on finished compacted section only) as per direction of Engineer-in-Charge.

Providing and laying plain cement concrete of M-15 of controlled quality having a minimum compressive strength with down graded black hard granite stone chips materials of 40mm size and down graded consistence with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.

Without Frame work Retaining Wall

For Frame work Retaining Wall

Providing weep holes in wing wall / return wall / Abutment with using 100 mm dia AC pipes with slope of 1V:20H towards drawing face including hoisting, laying, metal spall backing in rear side etc complete including centering and shuttering if required, with cost, conveyance of all materials, labour with T & P, Cess, required for the work and as per the specification and direction of Engineer-in- charge.