Rural Development Department Tender

Providing and applying primer coat with Bitumen Emulsion ( MS ) with all cost conveyance, labour T&P 4.0kg of bitumen per 10sqm etc. complete as per direction of the Engineer in Charge.

Providing & applying Tack coat using Emulsion including cost of Emulsion Labour etc complete as per direction of the Engineer in Charge.

Providing , laying semi dence bituminious concrete with batch type hot mix plant using crushed aggregates of specified grading, primixed with bituminous binder of 60/70 penitration grade of bitumen, transporting the hot mix to work site, laying with hydrostaic paver finisher with sensor control to the required grade, level on the alignment, rolling with smooth wheeled, vibratory and tandem roller to the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works etc.complete as per direction of EIC.

Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 .

Providing cement concrete (1:3:6) mix with 40mm nominal size stone aggregate in foundation upto a depth of 1.5m. below ground level & upto a hight of 1.5m. above ground level/bed level including cost & conveyance of all materials to site & all labour charges complete as per specification and direction of the Engineer - in - charge.

Cement concrete (1:1½:3) with clean hard crusher broken granite chips of 12mm size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge.