Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 46,41,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_107408_2Bid Award Id
ViewTender No
C.E. (B) - 19 / 2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Internal Road
460.8
-
-
... More
Drain
273.6
-
-
... More
Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
4877.64
-
-
... More
COMPOUND WALL & GATE
1021.22
-
-
... More
ELECTRICAL UTILITY BUILDING
224.34
-
-
... More
GUARD ROOM
19.12
-
-
... More
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-In-charge.
-
-
-
... More
Building Proper
3251.76
-
-
... More
COMPOUND WALL & GATE
654.18
-
-
... More
ELECTRICAL UTILITY BUILDING
149.56
-
-
... More
GUARD ROOM
11.92
-
-
... More
Earth work in excavated earth from work side for filling and carriage of earth by mechanical means with average lead of 5 km including loading and uncloading at road alignment including dressing and levelling & approved profile complete as per direction of the Engineer-in-charge
-
-
-
... More
Building Proper
1625.88
-
-
... More
COMPOUND WALL & GATE
367.04
-
-
... More
ELECTRICAL UTILITY BUILDING
74.78
-
-
... More
GUARD ROOM
7.2
-
-
... More
Site Development
9255.6
-
-
... More
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Building Proper
2936.68
-
-
... More
PARKING
641.68
-
-
... More
COMPOUND WALL & GATE
91.32
-
-
... More
ELECTRICAL UTILITY BUILDING
142.66
-
-
... More
GUARD ROOM
5.96
-
-
... More
Drain
34.2
-
-
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.(make-premise-BAYER,Paxton-FMC,ozie-KALYANI)
-
-
-
... More
Building Proper
3135.72
-
-
... More
ELECTRICAL UTILITY BUILDING
190.44
-
-
... More
GUARD ROOM
6.25
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
655.96
-
-
... More
PARKING
427.79
-
-
... More
COMPOUND WALL & GATE
91.32
-
-
... More
ELECTRICAL UTILITY BUILDING
45.55
-
-
... More
GUARD ROOM
1.67
-
-
... More
Drain
34.2
-
-
... More
Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
138.96
-
-
... More
First Floor
12.18
-
-
... More
Second Floor
8.14
-
-
... More
Third Floor
8.04
-
-
... More
Fourth Floor
10.51
-
-
... More
Terrace Floor
5.86
-
-
... More
COMPOUND WALL & GATE
5.43
-
-
... More
ELECTRICAL UTILITY BUILDING
11.68
-
-
... More
GUARD ROOM
0.09
-
-
... More
Providing 2.5cm thick Damp Proof Course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GUARD ROOM
2.75
-
-
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
BUILDING PROPER
-
-
-
... More
Foundation
899.31
-
-
... More
Grade Beam
175.29
-
-
... More
Lift shear wall
14.29
-
-
... More
Column up to Plinth
73.32
-
-
... More
ELECTRICAL UTILITY BUILDING
-
-
-
... More
Foundation
28.8
-
-
... More
Grade Beam
10.61
-
-
... More
Column up to Plinth
2.88
-
-
... More
GUARD ROOM
-
-
-
... More
Foundation
3.38
-
-
... More
Grade Beam
0.9
-
-
... More
Column up to Plinth
0.36
-
-
... More
COLUMN SUPERSTRUCTURE
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
106.84
-
-
... More
First Floor
86.74
-
-
... More
Second Floor
86.74
-
-
... More
Third Floor
86.74
-
-
... More
Fourth Floor
81.03
-
-
... More
Terrace Floor
50.37
-
-
... More
ELECTRICAL UTILITY BUILDING
9.18
-
-
... More
GUARD ROOM
0.66
-
-
... More
LINTEL
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
20.79
-
-
... More
First Floor
24.26
-
-
... More
Second Floor
16.29
-
-
... More
Third Floor
16.84
-
-
... More
Fourth Floor
19.02
-
-
... More
Terrace Floor
2.18
-
-
... More
ELECTRICAL UTILITY BUILDING
3.81
-
-
... More
GUARD ROOM
0.41
-
-
... More
CHAJJA
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
138.21
-
-
... More
First Floor
113.16
-
-
... More
Second Floor
127.13
-
-
... More
Third Floor
143.47
-
-
... More
Fourth Floor
100.04
-
-
... More
Terrace Floor
18.13
-
-
... More
ELECTRICAL UTILITY BUILDING
9.84
-
-
... More
GUARD ROOM
2.85
-
-
... More
ROOF BEAM
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
215.26
-
-
... More
First Floor
167.81
-
-
... More
Second Floor
167.03
-
-
... More
Third Floor
169.54
-
-
... More
Fourth Floor
153.15
-
-
... More
Terrace Floor
15.25
-
-
... More
ELECTRICAL UTILITY BUILDING
11.42
-
-
... More
GUARD ROOM
0.56
-
-
... More
ROOF SLAB
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
334.47
-
-
... More
First Floor
265
-
-
... More
Second Floor
273.27
-
-
... More
Third Floor
273.27
-
-
... More
Fourth Floor
234.49
-
-
... More
Terrace Floor
32.26
-
-
... More
ELECTRICAL UTILITY BUILDING
26.7
-
-
... More
GUARD ROOM
1.62
-
-
... More
STAIRCASE
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
16.05
-
-
... More
First Floor
16.05
-
-
... More
Second Floor
16.05
-
-
... More
Third Floor
16.05
-
-
... More
Fourth Floor
16.05
-
-
... More
Terrace Floor
1.52
-
-
... More
ELECTRICAL UTILITY BUILDING
4.22
-
-
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
COMPOUND WALL & GATE
-
-
-
... More
Foundation
170.96
-
-
... More
Grade Beam
28.12
-
-
... More
Column up to G.L
13.44
-
-
... More
Column superstructure
34.23
-
-
... More
Tie Beam
38.8
-
-
... More
Beam
4.38
-
-
... More
Slab
8.63
-
-
... More
Drain
-
-
-
... More
Foundation
51.3
-
-
... More
Wall
68.4
-
-
... More
Slab
42.75
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding, wastage & over lapping and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
2439
-
-
... More
First Floor
915
-
-
... More
Second Floor
915
-
-
... More
Third floor
923
-
-
... More
Fourth floor
831
-
-
... More
Terrace floor
158
-
-
... More
COMPOUND WALL & GATE
266.36
-
-
... More
ELECTRICAL UTILITY BUILDING
135
-
-
... More
GUARD ROOM
10
-
-
... More
Drain
97.47
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
471.52
-
-
... More
COMPOUND WALL & GATE
295.25
-
-
... More
ELECTRICAL UTILITY BUILDING
32.05
-
-
... More
GUARD ROOM
1.87
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
274.86
-
-
... More
First Floor
278.36
-
-
... More
Second Floor
233.88
-
-
... More
Third Floor
236.27
-
-
... More
Fourth Floor
218.08
-
-
... More
Terrace Floor
203.22
-
-
... More
ELECTRICAL UTILITY BUILDING
84.29
-
-
... More
GUARD ROOM
4.54
-
-
... More
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
141.25
-
-
... More
First Floor
163.06
-
-
... More
Second Floor
124.98
-
-
... More
Third Floor
130.18
-
-
... More
Fourth Floor
186.19
-
-
... More
Providing and fixing of 100 mm first track (pree FAB) drywall partition using non asbestos, non-combustible green building fiber cement boards made of autoclaved technology. The boards as per (IS 14862) are composed of recycled fibers and cement as raw materials with density of 1300Kg/m3 as per (ASTMC 1185)and ISO 8336 part (E) for confirming durability properties and BS 476 - pant 5, 6 & 7, Thermal conductivity should be minimum 0.15 Wim'K and PH value should be in the range of 7 - 8. The G.I. framework consists of 100mm studs of 0.45mm thick sections placed c/c in vertical direction at 600mm on Floor channel of 100mm or RCC and floor. Below the floor and ceiling sections one layer of vapour barrier is fixed to prevent the moisture absorption. The floor channel is fixed to floor and RCC with Hilti fasteners at 900mm c/c. At every 1200mm c/c horizontal supports are given for board jointing) points. Next one layer of 12mm thick fiber cement board on eiher side of vertical Stud sections and are fed in staggered joints on either side to avoid leakage through joints.
-
-
-
... More
These boards are joined using type 5 Seit tapping 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. Finally, boards and screw heads are to be jointed and finished so as to have a fush look which includes filing tapered edge and square edges of board with cement based joining compound and fiber tape (As per recommended practice of manufacturer).All edges are covered with fire sealants to give a better fire resistance. (based on client's requirements). The boards to be applied with one coat of cement primer on the back surface before installation. The edges of the wall to board to have 2mm gap and filled up with sealants.For sound insulation one layer of 50mm thick 1000gsm polywool is fixed to the framework in between two boards.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
810.14
-
-
... More
First Floor
454.38
-
-
... More
Second Floor
969.83
-
-
... More
Third floor
1165.79
-
-
... More
Providing 12mm thick cement plaster on external RCC/brick surfaces in cement mortar 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
518.19
-
-
... More
ELECTRICAL UTILITY BUILDING
300.9
-
-
... More
GUARD ROOM
3.6
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper (External Wall)
-
-
-
... More
Ground Floor
2484.56
-
-
... More
First Floor
2843.11
-
-
... More
Second Floor
2522.27
-
-
... More
Third Floor
2359.05
-
-
... More
Fourth floor
2318.29
-
-
... More
Terrace floor
1386.33
-
-
... More
COMPOUND WALL & GATE
4829.94
-
-
... More
ELECTRICAL UTILITY BUILDING
390.44
-
-
... More
GUARD ROOM
16.05
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper (Internal Wall)
-
-
-
... More
Ground Floor
5366.58
-
-
... More
First Floor
4668.52
-
-
... More
Second Floor
3272.26
-
-
... More
Third Floor
3312.1
-
-
... More
Fourth Floor
4921.46
-
-
... More
Terrace Floor
461.59
-
-
... More
ELECTRICAL UTILITY BUILDING
559.25
-
-
... More
GUARD ROOM
26.8
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
2686.53
-
-
... More
First Floor
2061.49
-
-
... More
Second Floor
2047.9
-
-
... More
Third Floor
2043.62
-
-
... More
Fourth Floor
1800.76
-
-
... More
Terrace Floor
186.74
-
-
... More
ELECTRICAL UTILITY BUILDING
190.44
-
-
... More
GUARD ROOM
17.95
-
-
... More
Finishing plastered surfaces of walls with cement based Acrylic wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
12676.14
-
-
... More
First Floor
10481.88
-
-
... More
Second Floor
9782.09
-
-
... More
Third Floor
10046.35
-
-
... More
Fourth Floor
9040.51
-
-
... More
Terrace Floor
2034.66
-
-
... More
ELECTRICAL UTILITY BUILDING
1441.03
-
-
... More
GUARD ROOM
64.4
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
12676.14
-
-
... More
First Floor
10481.88
-
-
... More
Second Floor
9782.09
-
-
... More
Third Floor
10046.35
-
-
... More
Fourth Floor
9040.51
-
-
... More
Terrace Floor
2034.66
-
-
... More
ELECTRICAL UTILITY BUILDING
1441.03
-
-
... More
COMPOUND WALL & GATE
2414.97
-
-
... More
GUARD ROOM
64.4
-
-
... More
Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
3002.75
-
-
... More
First Floor
2843.11
-
-
... More
Second Floor
2522.27
-
-
... More
Third Floor
2359.05
-
-
... More
Fourth Floor
2318.29
-
-
... More
Terrace Floor
1386.33
-
-
... More
ELECTRICAL UTILITY BUILDING
691.34
-
-
... More
COMPOUND WALL & GATE
2414.97
-
-
... More
GUARD ROOM
19.65
-
-
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
Engineer-in-charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-charge)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
9673.39
-
-
... More
First Floor
7638.77
-
-
... More
Second Floor
7259.82
-
-
... More
Third Floor
7687.3
-
-
... More
Fourth Floor
6722.22
-
-
... More
Terrace Floor
648.33
-
-
... More
ELECTRICAL UTILITY BUILDING
749.69
-
-
... More
GUARD ROOM
44.75
-
-
... More
Fixing granite tile of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
540.5
-
-
... More
First Floor
124.63
-
-
... More
Second Floor
124.63
-
-
... More
Third floor
124.63
-
-
... More
Fourth floor
124.63
-
-
... More
Terrace floor
87.35
-
-
... More
Fixing granite tile of approved dimension area above 0.4 sqm (10mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building
-
-
-
... More
Ground Floor
289.32
-
-
... More
First Floor
183.02
-
-
... More
Second Floor
183.02
-
-
... More
Third floor
221.38
-
-
... More
Fourth floor
183.02
-
-
... More
Terrace floor
75.96
-
-
... More
Providing full body matt finish vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 1200x600 (shade to be decided as per Ama Hospital scheme) (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
1574.03
-
-
... More
First Floor
1491.71
-
-
... More
Second Floor
1322.34
-
-
... More
Third floor
1303.97
-
-
... More
Fourth floor
936.98
-
-
... More
ELECTRICAL UTILITY BUILDING
160.44
-
-
... More
GUARD ROOM
6.25
-
-
... More
Supplying fitting & fixing of 10 mm thick & size of 600 x 600 mm (Preferably Somany, RAK, Johnson, Kajaria) Glazed Vetrified Tiles (GVT) of matt finish (WOODEN FINISH/RUSTIC FINISH) with veilcraft (VC) shield (Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib), in wall tiles in dados, skirting and in rises of steps laid on 12mm thick cement motar (1.:3) (1 cement :3 course sand) jointed slurry mixed with pigment to match the shades of the tiles etc. complete including all cost, labour, T&P, royality etc.all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
1043.33
-
-
... More
First Floor
1031.46
-
-
... More
Second Floor
572.58
-
-
... More
Third floor
535.35
-
-
... More
Fourth Floor
1000.22
-
-
... More
ELECTRICAL UTILITY BUILDING
21
-
-
... More
GUARD ROOM
1.42
-
-
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON / RAK / SOMANY/ KAJARIA) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
610.89
-
-
... More
First Floor
405.12
-
-
... More
Second Floor
405.12
-
-
... More
Third floor
405.12
-
-
... More
Fourth floor
405.12
-
-
... More
GUARD ROOM
1.43
-
-
... More
ELECTRICAL UTILITY BUILDING
30
-
-
... More
A/R-P 90/item No.17:Fixing of Industrial vetrified wall tiles in dados, skirting riser of stepps 30cmx30cm special plane / printed series of premium grade having thickness 8 mm to 10 mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON / RAK / SOMANY/ KAJARIA) on 12 mm thick bed of C.M. (1:3) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
86.76
-
-
... More
First Floor
86.76
-
-
... More
Second Floor
86.76
-
-
... More
Third floor
86.76
-
-
... More
Fourth Floor
86.76
-
-
... More
Providing and laying antimicrobial 2mm thick homogeneous PVC vinyl flooring RQ Restorable Quality (single layer of PVC) with Weight 2950g/m2, PUR (Polyurethane reinforced), RQ Abrasion group T:4.00 mm,residual indentation approx.0.04 mm,castor wheel test qualified, dimensional stability 30.04%, static electrical charge 2 kv, good resistance of scratch, slip chemical and fire, IMO Marine 0575 certified, doesn't favor in growth of fungi & bacteria. 100% recyclable. VOC emissions after 28 days of installations (lower than 10ug/m3). The sheets at the corners and floor wall junctions shall be laid with PVC cove to avoid sharp joints as per direction of Engineer-In-Charge. The joints shall be made joints seamless with PVC weld rod. Rates inclusive of Corner Coves and welding.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
94.17
-
-
... More
First Floor
31.88
-
-
... More
Second Floor
225.12
-
-
... More
Third floor
219.62
-
-
... More
Fourth floor
389.08
-
-
... More
Providing and fixing of 12mm thick 100% Acrylic UV Solid Surface of approved make IW-118 (I-White) shade in approve design, with ISO 14001-2015 and ISO 9001 - 2015 certified with properties like exterior UV Non-Porous, Themofomable, Unnoticeable Joints after applications, bacteria & anti fungal resistance, heavy duty scratch & stain resistant, impact resistant, insulative & non conductive,Green Bilding IGBC certified, Fire rating as per standard DIN1402-1 surface spread of flame and having minimum Specific Gravity1.65g/cm3 properties. With additional properties like Tensile strength-54.5 N/mm2,Elongation at break, 2% (Speed 5mm/min.),Flexural Strength-60 N/mm2 (Speed 2mm/min.),Density-1.74gm /cc,Water Absorption-0.02 % (At R.T. for 24 hour) ,Abrasion Resistance Test -19.4 ,Barcol, Hardness-60-62 ,Limiting Oxygen Index-36.4 % ,Coefficient of Linear thermal, Expansion, mm/mm/°c-10x10/°c (-6 degree celcius),Boiling Water resistance(At Boiling Water for 20 minutes)-No Change in surface color.
-
-
-
... More
Application of Acrylic UV solid surface sheets to be cut, pasted and finished in approved shade, as per approved design by the Engineer in charge. This solid surface should be fixed over Plyboard supporting structure with all mechanical fixtures as per specification, drawings and guideline from the techincal person from supplier company. The quoted rates shall inclusive off material cost with fabrication & installation at site, cost of silicon & approved adhesives, chamfering of edges, flushing of joints and final finishing as per directions of Engineer-in- charge. Complete including cost of all materials, labour required for the work.(Make:DURLAX India/ Merino Hanex)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
164.77
-
-
... More
First Floor
48.93
-
-
... More
Second Floor
147.41
-
-
... More
Third floor
299.28
-
-
... More
Fourth floor
913.87
-
-
... More
Supply, fitting & fixing of Wood polymer composite (WPC) Door Frames with Rebate cuts and Assessories like - L-clamps and screw, finished cross section size 75mm x 45mm / 90mm x 50mm / 115mm x 55mm with 100% water, Termite and Borer proof with Density of 850 kg/m3, 100% recycleable, no contraction/ Expansion, Bend proof, Crack proof with 10yrs written warrantee, 100% Formaldehyde, phenol and Toxic free, swelling proof, screw holding capacity 70kg per screws with all necessary hardware fitting & fixtures etc complete as per directions of EIC.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
392.7
-
-
... More
First Floor
311.4
-
-
... More
Second Floor
252.6
-
-
... More
Third floor
306.75
-
-
... More
Fourth floor
294.75
-
-
... More
Terrace floor
24
-
-
... More
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
180.45
-
-
... More
First Floor
149.67
-
-
... More
Second Floor
120.24
-
-
... More
Third floor
147.69
-
-
... More
Fourth floor
137.43
-
-
... More
Terrace floor
11.52
-
-
... More
Guard Room
2.1
-
-
... More
Supplying and fixing of Powder coated 50-60 microns approved colour of Aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass of make-Saint gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion ,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm glass felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealant in the outer side. Casement Door Outer frame - 40mm x 45.3mm Series x 1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8 x 1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm thickness, including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge.(make-Jindal,Hindalco,schueco)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
7.2
-
-
... More
Supplying and fixing of Anodisied 15 microns / Powder coated 50-60 microns approved colour aluminium 50mm Casement series door cum fixed Unit with suitable aluminium extrued profiles. the system should design to accommadate 5mm clear Toughen glass 50% and 50% 4MM ACP. the rate inclusive of hardwares like antilift,roller, espag lock cum handle,epdm gaskets, felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealent in the outer side.Casement Door Outer frame ( 50*46 mm SERIES) Sash - 78.5 * 58 mm ) + Mullion 66 * 50mm + Beeding 35.5 *25.5 mm) Make - WINPLUS+ / ALUPURE / ALUK
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
11.52
-
-
... More
Supply & installation of Lead line door.Doors are designed to fit flush into the wall panel system and are supplied in different dimensions. Doors are fabtricated from galvanised iron sheets duly powder coated or SS304 sheets. Shutter has sheet thickness of 0.8mm and the frame of 1.2mm. Frame width of 50/100 mm and shutter width of 46mm. Doors are available in various sizes as per the requirement of the client. The following accessories are a part of the door:Shutter Thickness: 46 mm thickStainless steel Ball Bearing Butt hinges MORTISE DEAD LOCKStandard arm door closerDouble glazed view panel along with self adhesive tape and silicon sealantFiller material : HONEY COMB/ROCKWOOL
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
11.52
-
-
... More
First Floor
11.52
-
-
... More
Second Floor
11.52
-
-
... More
Third floor
11.52
-
-
... More
Fourth Floor
11.52
-
-
... More
Terrace floor
11.52
-
-
... More
Poviding and fixing of glazed fire door for 120 mins fire rating. Glazed door shall be tested as per IS/ISO 834-1, IS/ISO 3009-1, IS16947 for 120 mins fire rating. Door frames and partitions shall be single rebate frame profile of size 125 x 60mm made out of 1.60mm GI (120GSM). Door leaf shall be fully glazed with minimum 60 x 120mm profile step box section for taking glass elements. Door leaf shall be manufactured from 1.2mm GI (120GSM). Doors shall be 60mm thick and the internal construction of the door should be rigid reinforcement pads for stability of profile. For doors and partitions, beeding shall be minimum 1.2 mm GI with 25mm height, with screws 6 x 19mm. The infill material shall be resin bonded honycomb for rigidity. The glass shall be, ultra clear fire rated glass E120 minimum 8mm thick, for (E) 120 minutes integrity with light transmission of minimum 92% as per EN1363 and EN1364. Glass shall have a impact resistance of 1B1 as per EN 12600, Glazing kit to be provided along with steel beeding and ceramic tape. Doorset shall include following hardware and accessories as a complete assembly.
-
-
-
... More
SS ball bearing hinges of SS304 grade of size 100x75x3mm, Fire rated mortise dead lock, 55mm BS, 20mm sq. forend, including escutheion, with both side key cylinder, 1pairs Pull handle D type, 22dia, CTC 300mm, back to back, with spindle, SS 304, SSS finish. Door closer with spring size of EN 2-4, as per EN1154 and CE marked. Doorset finished in desired colour of powder coating not less than 50microns including suitable anchors all inclusive for fixing of doorset. Rate shall include supply and installation of frame,shutter as a complete assembly including all hardware, & glass with tape.Manufacturer test certificates shall covers complete door set as a un-latched assembly with a valid test certificate not exceeding 5 years from the date of issue of report. for more info refer doors details drawings. Approved make : Shakti
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
5.76
-
-
... More
Supply of tested fully glazed steel fire rated double leaf door with 120 minutes of integrity and radiation control (Ew 120 I) fabricated with 1.6 mm thick galvanized steel sheet.The door frames are manufactured from 1.6 mm galvanized steel sheet pressed to form a profile of 35 mm x 60 mm on the veritical sides and 50 x 60 mm on the horizontal side.The door shutter would have atop rail 60 mm x 60mm and a bottom rail of 110 mm x 60mm. The shutter should be fixed to the frame using Dorma SS Ball Bearing hinges of size 100 mm x 89 mm x 3mm thickness or equivalent. Beading should be attached using 4mm x 35 mm SS Screw at a distance of 75 mm from the edges and 150mm c/c henceforth.The inactive leaf should be fixed to the frame using tower bolt.The test report will be considered valid only if it contains the stamp & signature of the authorised agency.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
19.2
-
-
... More
First Floor
14.4
-
-
... More
Second Floor
37.92
-
-
... More
Third floor
24
-
-
... More
Fourth floor
14.4
-
-
... More
Providing and fixing of OT Door frames must be formed of 1.2 mm thick Stainless Steel (SS) Grade 304 No.4 Finish sheet with a single rebate profile of 100 x 62 mm. Frames must be mitered or butt fastened, and field assembled using self-tabs or nuts and bolts. To receive the proper hardware, every provision should be mortised, drilled, and tapped. Back plate brackets and anchor fasteners should be included with frames for installation on a finished plastered masonry wall opening with Door leaf of 46mm thick double skin door is designed to fit flush into the wall panel system and is supplied in different dimensions. Doors are fabricated from 0.8mm Stainless Steel (SS) Grade 304 No.4 Finish sheets. The GI sheets are resin bonded with honeycomb core as an infill material. The doors are factory CNC fabricated with all necessary provisions for receiving hardware such as hinges, locks and door closers. Double Glazed View Panel of 5mm glass shall be provided as per requirement. For double leaf doors, integrated astragals must be provided on the meeting stile for both the active and inactive leaf. Optional hardware such as Single/Double Point Panic bars can be provided as per client requirement. Optional Infill of Rockwool can be provided for better insulation as per client requirement, Doors can also be internally lined with 2mm Lead sheet to prevent from radiations as an option. DOOR HARDWARE:-SS 304 Ball bearing Butt Hinges ,Door Closer,Mortise Locks ,SS 304 D’ Handle on both sides ,Single/ Double Point Panic Bar with External Trim ,Automatic drop bottom seal,Vision Panel (Double Glazed),including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge.(make-Swathi,Steeltech,Metaflex)
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
4.32
-
-
... More
Providing and fixing factory made 2.5 track uPVC white colour sliding window (FENESTA/ NCL VEKA LTD./ Koemmerling/ DURAPLAST/ Rajshri) with SS mesh comprising of uPVC multi-chambered frame having section Frame 88mm x 49mm, Window sash: 37mm x 61mm, Bugmesh sash: 58mm x 32mm made out of lead free green profiles with corners fusion welded, fully reinforced with Galvanized steel 1.5 mm. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size. The sash will be fitted with 5mm clear glass ( Toughen ).
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
265.31
-
-
... More
First Floor
219.09
-
-
... More
Second Floor
227.85
-
-
... More
Third Floor
227.63
-
-
... More
Fourth Floor
186.83
-
-
... More
ELECTRICAL UTILITY BUILDING
15.18
-
-
... More
GUARD ROOM
1.8
-
-
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
6632.63
-
-
... More
First Floor
5477.25
-
-
... More
Second Floor
5696.25
-
-
... More
Third floor
5690.63
-
-
... More
Fourth floor
4670.63
-
-
... More
Terrace floor
360
-
-
... More
ELECTRICAL UTILITY BUILDING
721.5
-
-
... More
GUARD ROOM
63
-
-
... More
Priming one coat with approved Wood Primer on wood work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of engineer-in-charge. (Make- Asian / Berger / ICI or equivalent make duly approved by Engineer-in-charge).
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
98.18
-
-
... More
First Floor
77.85
-
-
... More
Second Floor
63.15
-
-
... More
Third floor
76.69
-
-
... More
Fourth floor
73.69
-
-
... More
Terrace floor
6
-
-
... More
GUARD ROOM (Both Side)
2.6
-
-
... More
Priming one coat with approved Red Oxide Primer on Steel work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of engineer-in-charge. (Make- Asian / Berger / ICI or equivalent make duly approved by Engineer-in-charge).
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
265.31
-
-
... More
First Floor
219.09
-
-
... More
Second Floor
227.85
-
-
... More
Third floor
227.63
-
-
... More
Fourth floor
186.83
-
-
... More
ELECTRICAL UTILITY BUILDING
28.86
-
-
... More
COMPOUND WALL & GATE
30.9
-
-
... More
Guard Room
1.8
-
-
... More
Painting two coat with approved synthetic enamel paint to new iron & wood work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
363.48
-
-
... More
First Floor
296.94
-
-
... More
Second Floor
291
-
-
... More
Third floor
304.31
-
-
... More
Fourth floor
260.51
-
-
... More
Terrace floor
6
-
-
... More
ELECTRICAL UTILITY BUILDING
28.86
-
-
... More
COMPOUND WALL & GATE
30.9
-
-
... More
GUARD ROOM
4.4
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. (Make-JINDAL )
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
2537.93
-
-
... More
First Floor
2108.66
-
-
... More
Second Floor
2108.66
-
-
... More
Third floor
2108.66
-
-
... More
Fourth Floor
2108.66
-
-
... More
Terrace floor
175.9
-
-
... More
ELECTRICAL UTILITY BUILDING
78.53
-
-
... More
Providing & fixing true horizontal level suspended ceiling comprising of Stainless Steel Clip-in with double pip self-leveling feature and special tabs to allow removal of tile to enable plenum access with plain visual consisting of 600X600 clip in tiles of Brushed steel finish in 0.50mm thickness with bevel edge and suitable for Green Building application, with Recycled content of 25%. Installation: To comprise 3000mm long ‘C’ channels spaced at 1200mm centers securely fixed to the structural soffit by support clamp & approved hangers. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm Dp-12 Main carriers (spring tee bars) shall be spaced at 600mm centers in a direction perpendicular to the C-channels and shall be secured at every intersection with C channel using a dp-12 hanger. Use Dp-12 connector to splice two pieces of Dp-12 main carriers. Tiles should be clipped in between two Dp-12 carriers (spring tee bars) from below. This is a downward installation. Perimeter trims to be of Knauf Ceiling Solutions wall angles of white color secured to walls at 450mm maximum centers. Cut tiles to be secured to the wall angles using a spring clamp.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
94.17
-
-
... More
First Floor
31.88
-
-
... More
Second Floor
225.12
-
-
... More
Third Floor
219.62
-
-
... More
Fourth Floor
389.08
-
-
... More
Supply and Installation of 14 mm GRG Tiles steppe edge ceiling tile of size 595 x 595 x 14 mm on the edge & 7 mm in the center having all edges encapsulated with chemical treated paint & having densified tegular edge ,weight 5 kg/m2 having random circular semi perforated in dual diameter / Random fissure semi perforated in variable length which is suspended by using 0.3 mm thick and 15 mm wide pre coated metal T 15 grid system. The technical parameters are as follows : Core - GRG Silicate, Fire – Class 1 & P , Acoustics – NRC 0.5,Climate (degree C, RH) – 50, 99, STC - 30, Termite resistance ,Light reflectance – 85 %,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low, , Load capacity (Kg) - Antisag. The T 15 Grid system of 600 x 600 mm module shall include wall angle(WA 15) with unequal flanges of size 14 x 20 x 3000 mm wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Main T15 (MT15 W36) having flange width 15 mm /24 mm , height 32/38 mm and length 3600 mm thickness 0.30 mm from the soffit with help of soffit cleat and wire at 1200 mm c/c. Cross T15 (CT15 W12) with flange width 15 mm, height 32 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T15 at 600 mm centers in the direction perpendicular to the Main T15. Finally, Cross T15 (CT15 W06) having flange width 15 mm, height 32 mm and length 600 mm are then interlocked into the pre cut slots in the 1200 mm Cross T15 at 1200 mm centers and in direction parallel to the Main T15. GRG Tile of size 595 x 595 x 14 mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind panels are oriented in one direction to achieve uniform shade. Test certificate will be submitted after procurement of materials
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
1847.73
-
-
... More
First Floor
1491.71
-
-
... More
Second Floor
1322.34
-
-
... More
Third floor
1303.97
-
-
... More
Fourth floor
936.98
-
-
... More
Supplying and Installing of Expoband one Flexible Polyolefin (FPO) membrane system which is designed to be bonded over expansion and movement joints up to 150mm in structures to prevent the passage of water having Elongation at break : 400% , Tensile Strength : 12.5N/mm2 (DIN EN 12311-2 Method B), Water vapour permeability : 2.7g/Sqm/day (DIN EN 1931-Method B). It is bonded in position using two-part epoxy adhesive, Nitobond PC40 as per manufacturer direction after proper fixing of the necessary backup materials as specified and directed by the Engineer In-charge. The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation etc. complete as per design, drawing & instructions of EIC.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
23.6
-
-
... More
First Floor
23.6
-
-
... More
Second Floor
23.6
-
-
... More
Third floor
23.6
-
-
... More
Fourth floor
23.6
-
-
... More
Providing & Installation of GFRC GFRC JALI (Glass Fiber Reinforced Concrete) thickness of 25-30 mm & Border thickness of 50 mm with Pattern, design, and colour of approved make to be fixed on/between RCC/Block work Column or structural work with Dry Fixing method with appropriate SS Pipe & Cleats frame work, using fasteners, and necessary hardware etc. The element shall be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning' or equivalent, Super plasticizers / Additives make by 'BASF' or equivalent, and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould/Tool/ Mould Grade Resin of Revex/ 'Reckli' or equivalent.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
198.13
-
-
... More
First Floor
148.6
-
-
... More
Second Floor
148.6
-
-
... More
Third floor
86.4
-
-
... More
Fourth floor
86.4
-
-
... More
Providing and fixing of 6.0 mm thick suede finish exterior grade compact laminates (CLAD) made of 1300 mm x 3050 mm in size and manufactured under EN438- 2&3:2005 standard CLAD should be made with C technology and double layer UV protection process under high pressure, thermosetting phenolic resign treated exclusive and certified exterior grade decorative paper (UV Resistant) on both side with high grade kraft paper in between. Both the decorative and kraft paper to be made of virgin plus .CLAD should be resistance to water immersion characteristics with permissible increase in thickness and mass 0.60% and have density 1.35G/cm3 UV resistance on grey scale measurement will be measured≥4, with flame retardant fulfilled the criteria of under EN13501-1:2007 with classification of BS 1D0 standard property, moisture resistance, impact resistance, corrosion free ,saltwater resistance, termite resistance, scratch resistance, weather and climatic shock resistance high pressure thermosetting resign treated balanced compact laminates clad,(The manufacture should provide 10 years warranty certification on manufacturing and moisture related defects). Exterior product with anti-bacterial and anti-fungal property under JIS Z2801:2000.CLAD will be installed on aluminium tubes at 500 mm c/c distance wi special L brackets .There will be special fixing treatment on all corners sections. Aluminium box size will be 25 mmx50mmx1.8mm. Boards will be fixed on the aluminium channels with colour match rivets through 8mm drill hole in boards and 5.0 mm dia drill holes in aluminium box. Rivets will be installed by automat rivet guns shade designed of clad should be finalized under direction of Engineer-in-charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
8.46
-
-
... More
First Floor
8.46
-
-
... More
Second Floor
8.46
-
-
... More
Third floor
8.46
-
-
... More
Fourth floor
8.46
-
-
... More
Terrace floor
8.46
-
-
... More
Supplying & Fixing of NCL Roll Formed Section for Structural Glazing made of galvanized steel colour coated / power coated (Base steel as per IS 513 'D' quality galvanized thickness of 0.72 mm. The glass holding section made of 304 grade stainless steel of 0.6 mm thick. CRCA sections with polyurethane coating are to be used as stiffeners inside the CCS section as per the design requirement. paint specifications coated section should be with primer coat of Epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or powder coated with pure polyster up to 50-60 microns thick. Dimensions of sections. The sections are to be of 100 x 50 mm for frame verticals, 33 x 57 mm for frame horizontals, section for reinforcement should be of 31x55 mm / 48 x 98 mm (CRCA). Glass holding section should be of 32.5 x 37 mm for top bottom grids, in between should be of 32.5 x 18 mm.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
14.4
-
-
... More
First Floor
14.4
-
-
... More
Second Floor
14.4
-
-
... More
Third floor
30.2
-
-
... More
Fourth Floor
30.2
-
-
... More
Terrace floor
14.4
-
-
... More
Supplying and fixing in floor, tread, steps and landing with Ceramic Floor tiles of special plain/printed series of premium grade having thickness 7mm to 8mm confirming to IS 13755 and of size 300mm x 300mm / 400mm x 400mm of approved make (JOHNSON /RAK / SOMANY/ KAJARIA or equivalent ), laid over 20mm thick bed of cement mortar (1:4) (1cement:4course sand)and filling the joint with white cement mixed with pigment to match the shades of the tile including cost, conveyance, royalties, taxes of all materials, all labour, hire and running charges of all machineries,labour cess, T&P sundries complete as per specifiction and direction of Engineer-in-Charges.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
92.23
-
-
... More
First Floor
131.26
-
-
... More
Second Floor
117.28
-
-
... More
Third floor
133.94
-
-
... More
Fourth Floor
94.24
-
-
... More
Fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 of size 30cm x 20cm / 20cm x 20cm special plain / printed series in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Building Proper
-
-
-
... More
Ground Floor
976.44
-
-
... More
First Floor
587.04
-
-
... More
Second Floor
545.72
-
-
... More
Third floor
642.05
-
-
... More
Fourth floor
422.81
-
-
... More
Waterproofing application:- Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm The membrane should have Elongation equal or more than: 30% Crack Bridging ability : Up to 1 mm
Adhesive strength: 1.0 N/mm² @ 28d
Tensile elongation: 60% @ 20°C
Shore A Hardness 85 (between 3 - 7 days)
etc. as per direction of E.I.C (For longer span, in terrace panel of 4m*4m should be done by groove cutting, and filling with PU Sealant)
(Make:MYK / Fosroc/Pidilite)
-
-
-
... More
Building Proper
-
-
-
... More
First Floor
620.37
-
-
... More
Fourth floor
247.2
-
-
... More
Terrace floor
1948.71
-
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Building Proper
-
-
-
... More
First Floor
620.37
-
-
... More
Fourth floor
247.2
-
-
... More
Terrace floor
1948.71
-
-
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per direction of the Engineer-in-charge.
-
-
-
... More
PARKING
4277.87
-
-
... More
Providing supplying fitting and fixing of GI Gate made out of G.I Angle, sheet flat as per approved desigin including cost,carriage royalty of all materas required for thework etc.complete in all respect as directed by the Engineer in charge.
-
-
-
... More
COMPOUND WALL & GATE
1391
-
-
... More
Labour for fitting and fixing of M.S. Gates (M.S. door,window grills,collapsible gates) as per approved design and drawing including making holes in R.C.C/brick structures etc.& making good to the damaged walls with C.C. (1:2:4) complete excluding cost of gates but including cost of screws, costs of all labour etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
COMPOUND WALL & GATE
30.9
-
-
... More
GUARD ROOM
1.8
-
-
... More
Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .
-
-
-
... More
GUARD ROOM
0.08
-
-
... More
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction as per Technical Specifications and as per Clause - 305.3.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
... More
Internal Road
460.8
-
-
... More
Providing G.S.B. Gr-VI stone screaning materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, as per approved Drawing & Technical Specifications and as per Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
460.8
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per approved Drawing & Technical Specifications and as per Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
768
-
-
... More
Providing and Applying Primer Coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
3072
-
-
... More
Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
3072
-
-
... More
Providing 50mm compacted thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
153.6
-
-
... More
Providing 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
-
-
-
... More
Internal Road
76.8
-
-
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
... More
Internal Road
153.6
-
-
... More
Providing Weep holes in guard walls using 100 mm dia AC pipe including 40mm agreegate block of size 300x300x300mm behind the weep hole complete as per drawing and as per clause no.2706 of specification for road & bridge works of Ministry of Road Transport & Highways ( 4th revision ) & direction of Engineer - in- Charge.
-
-
-
... More
Internal Road
76
-
-
... More
E.I. WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/Norpak/Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
400
-
-
... More
GROUP-B
340
-
-
... More
GROUP-C
1650
-
-
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
326
-
-
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
413
-
-
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
300
-
-
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
102
-
-
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius-NEXT GEN)) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
20
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
5244
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
17800
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/ Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
6522
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
2588
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
2055
-
-
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/ Norpak/ Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
1988
-
-
... More
Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens ISI marked as approved,All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.(for equipement only & split AC at required area)
16
-
-
... More
Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ Norpak/ Kinjal.(Only for data, telephone, CCTV)
-
-
-
... More
20 MM
4900
-
-
... More
25 MM
4900
-
-
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
20
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make-Schneider (Zencelo)/ legrand( ( Myrius-NEXT GEN)) /Panasonic (vision)as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
24
-
-
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
44
-
-
... More
Sub-Head II (Light fitting Fixture & Fan)
-
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
60
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
60
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
605
-
-
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
1275
-
-
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 25W (595mm x 595 mm x70mm) and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
160
-
-
... More
Supplying an fixing of recess/surface mounted 2'x2' 36 W(595mmx595mmx70mm) square shaped LED with lumen efficacy not less than 130lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
400
-
-
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
200
-
-
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
120
-
-
... More
Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, Top opening clean room LED luminaire of 595mm x 595 mm x70mm size with of 45 W and system lumens output not less than 4500 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2years. .CLEAN ROOM FITTING for OT.
20
-
-
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
788
-
-
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+4+12+12) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,incomming II-4 modules,sub incommer-12 module & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
20
-
-
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
20
-
-
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years
8
-
-
... More
8 Way(8+4+12+24) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,incomming II-4 modules,sub incommer-12 module & out going-24 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
20
-
-
... More
Supplying and fixing 20 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
12
-
-
... More
Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
888
-
-
... More
Supplying and fixing 40 amps rating, 415 volts, C series,10KA breaking capacity, FOUR poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
20
-
-
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
20
-
-
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
80
-
-
... More
Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
60
-
-
... More
Supplying and fixing 63Amps 4P 415 volts MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB with connections as per direction of Engg.-in-Charge..Warranty on MCB is 3 years.
20
-
-
... More
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The RCCB should be Replacement Warranty will be 3 years.
20
-
-
... More
Supplying and fixing 40 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
20
-
-
... More
Supplying and fixing of Type (I +II) 3P+N SPD with Lightening impulse discharge current I imp(10/350) µs 7kA/POLE and 25kA total and maximum discharge current Imax(8/20) msec-50kA,with response time25 nanosec in the incommer of Distribution board, Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB with connections as per direction of Engg.-in-Charge.The SPD should have Replacement Warranty will be 3 years.
40
-
-
... More
(Earthing) INSTALLATION
-
-
-
... More
Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.
10
-
-
... More
Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
10
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. Tapping from 50mm x 6 mm bus bar to all sub panel
655
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. Main LT ROOM dg panel earthing
355
-
-
... More
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. MainLT ROOM dg panel earthing.
288
-
-
... More
Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. 2 runs from main LT room to electrical shaft upto 5th floor
100
-
-
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/ Gloster of following size cables as per direction of Engg.-in-Charge.
-
-
-
... More
3.5core x 300 sq mm
138
-
-
... More
3.5core x 240 sq mm
120
-
-
... More
3.5core x 150 sq mm
150
-
-
... More
3.5core x 95 sq mm
155
-
-
... More
3.5core x 70 sq mm
120
-
-
... More
4core x 16 sq mm
200
-
-
... More
4 core x 6 sq mm
223
-
-
... More
3.5core x 35 sq mm
88
-
-
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
122
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
124
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
370
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
200
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
134
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
156
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
166
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
122
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
66
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
66
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x300 sq mm
12
-
-
... More
3.5 core x240 sq mm
10
-
-
... More
4 core x16sq mm
10
-
-
... More
3.5 core x35 sq mm
10
-
-
... More
3.5 core x95 sq mm
20
-
-
... More
3.5 core x150 sq mm
8
-
-
... More
3.5 core x70 sq mm
8
-
-
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
42
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
200 mm dia
200
-
-
... More
PANELS
-
-
-
... More
FLOOR POWER PANEL(1F,2F,3F,4F,STP,,LAUNDRY,AHU,VENTILATION )
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 40X10MM Separate Aluminium Earth bus bar should be installed.
In commer-01 number of 250 Amps 4P onload type Changeover (Make-C&S/LK/Siemens/Schneider/Legrand)
Busbar- 04 numbers of 400Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 63A 4P MCB 10kA,C series 08 NOS FOR POWER BDB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
Out going- (ii) 04 nos 32A 4P MCB 10kA,C series LIGHT BDB AC IDU BDB/LIGHT BDB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
Instrument- (i) 3 numbers phase indicating lamp with 2A SP MCB,C,10KA.
(ii) 01 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
8
-
-
... More
FLOOR PANEL POWER RIGHT WING(OT FLOOR)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 40X10MM Separate Aluminium Earth bus bar should be installed.
In commer-01 number of 250 Amps 4P onload type Changeover (Make-C&S/LK/Siemens/Schneider/Legrand)
Busbar- 04 numbers of 300Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 63A 4P MCB 10kA,C series 4 NOS FOR POWER BDB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
Instrument- (i) 3 numbers phase indicating lamp with 2A SP MCB,C,10KA( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
(ii) 01 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
1
-
-
... More
FLOOR LIGHT PANEL(1F,2F,3F,4F ,LIFT,)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer-01 number of 125 Amps 4P onload type Changeover (Make-C&S/LK/Siemens/Schneider/Legrand)
Busbar- 04 numbers of 200Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i)32A 4P MCB 10kA,C series 08 NOS FOR EM. POWER BDB( ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) Out going- (ii) 04 nos 32A 2P MCB 10kA,C series POWER BDB AC IDU /LIGHT BDB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
Instrument- (i) 3 numbers phase indicating lamp with 2A SP MCB,C,10KA.
(ii) 01 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
6
-
-
... More
MAIN CONTROL PANEL AT SERVICE AREA
1
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted(Totally type tesed standard) TTA IEC:61439-I &II cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be with compelete test certificate must be submitted along with panel board including component list.Make of main LT panel-Schneider(PRISMA)/SIEMENS(SIVACON)/ABB(R2K) 80X10MM Separate Aluminium Earth bus bar should be installed.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.
In commer-1- 02 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with Breaking(with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG.Make-Schneider(MASTERPACT )/Siemens(3WT)/Legrand(DMX SP) (WITH AXULARY FOR BMS) With On/Off/Trip Indication with TNC switch(750 KVA TRANSFORMER 2 NOS)
-
-
-
... More
In commer-2- 02 number 4p 800A EDO TYPE ACB with 1. Micro Processer Based with breaking (with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG.Make-Schneider(MASTERPACT )/Siemens(3WT)/Legrand(DMX SP) (WITH AXULARY FOR BMS) With On/Off/Trip Indication with TNC switch(500 KVA DG 2 NOS) BUS COUPLER-1- 01 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with breaking (with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG.Make-Schneider(MASTERPACT )/Siemens(3WT)/Legrand(DMX SP) (WITH AXULARY FOR BMS) With On/Off/Trip Indication with TNC switch.
-
-
-
... More
1 No PLC based Logic controller Comprising of
-
-
-
... More
1 No - PLC based logic contrller for 2 nos of DG & 2 no of Transformer,EM DG with auto syncronisation, auto load sharing & energy monitoring system.
Busbar-1&2 04 numbers of 1600Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing).
Out going- 02 numberof 630A 4P MCCB(400-630) with ROM 36kA with adjustable Micro processor Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)with shunt trip.with axulary for BMS (SPARE,VRF )With On/Off/Trip Indication. Out going- 03 number of 630A 4P MCCB(600-630) with ROM 36kA with adjustable Micro processor Release with Ics=100% Icu. (make- Equievalant LSING ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)with shunt trip.with axulary for BMS (BUS RISER power )With On/Off/Trip Indication
Out going- 02 numbers of 400A(320-400) 4P MCCB with ROM 36kA with adjustable MICRO PROCESSOR Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)with shunt trip.with axulary for BMS (HVAC & light,BUS BAR TRUNKING LIGHT,SPARE,KITCHEN)With On/Off/Trip Indication.
-
-
-
... More
Out going- 4 numbers of 100A(80-100) 4P Icu=100%Ics, LSIG MCCB with adjustable Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSIG model of ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS)with shunt trip.with axulary for BMS(with on/off indication) . Out going- 4 numbers of 125A(100-125) 4P Icu=100%Ics, LSIG MCCB with adjustable Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSIG model of ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS)with shunt trip.with axulary for BMS(with on/off indication) .
Out going- 3 numbers of 250A(100-250) 4P Icu=100%Ics, LSIG MCCB with micro processor based release with adjustable overload 36KA ,( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)(Utility,fire,STP,Spare)With On/Off/Trip Indication.
Out going- 8 numbers of 32A 4P MCB10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)(LIGHT SUPPLY) ,8 numbers of 63A 4P MCB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)(POWERSUPPLY) Out going- 1 numbers of 250A(100-250) 4P Icu=100%Ics, LSIG MCCB with micro processor based release with adjustable overload 36KA along with 250A 4P contactor with axularies ,( Make-/L&T(MCX TYPE//Legrand(eq.)))(Utility,fire,STP,Spare)With On/Off/Trip Indication.
-
-
-
... More
Instrument- (i) 36 SETs phase indicating lamp with 2A SP MCB,C,10KA..
(ii) 24 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.
(iii)1 SET 65kA 3P+N SPD WITH 63A 4P MCB,10 kA Cseries
(iv)Announciation system,auto load manager with sysnchronization with DG
NB- This panel should have proper earth by suitable rated copper flat.
-
-
-
... More
MAIN 60 KVA UPS EMERGENCY PANEL
1
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 02 number of 125 (100-125)Amps 4P MCCB,LSIG with ROM ,25kA with adjustable Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSING model of ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)with shunt trip.with axulary for BMS(with on/off indication) .
Busbar- 04 numbers of 200Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (ii) 5 nos 63A 4P MCB 10kA,C series UPS PAENL EACH FLOOR,ICU BDB /EM LIGHT BDB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
Out going- (i) 02 NOS OF 100A(63-100)Amps 4P MCCB,LSIG with ROM ,25kA with adjustable Thermal Magnetic Release with Ics=100% Icu. (make- Equievalant LSIG model of ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS)with shunt trip.with axulary for BMS(with on/off indication) .
Instrument- (i) 4 sets phase indicating lamp with 2A SP MCB,C,10KA.
(ii) 02 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model) (iii)2 SETS. 3P+N 65kA/POLE type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(TYPE-I)(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
-
-
-
... More
FLOOR UPS PANEL & ,OT,ICU
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 01 no 63 A 4P MCB 10kA,C series with on/off trip indication Light load for each floor. ( Make-LEGRAND DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Busbar- 04 numbers of 100Amps,50kA Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
Out going- 6numbers of 32A 4P MCB 10kA,C series( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Out going- 4numbers of 32A DP MCB 10kA,C series( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
5
-
-
... More
FDB EQ.-CSSD,XRAY,WASHING
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 01 no 63 A 4P MCB 10kA,C series with on/off trip indication Light load for each floor. ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9),
Busbar- 04 numbers of 32Amps,50kA Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
Out going- 3 numbers of 32A 4P MCB 10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60AmpsMFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model).
2
-
-
... More
HVAC ODU PANEL,COM.
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 60X10MM Separate Aluminium Earth bus bar should be installed.
In commer- 01 number of 400A 3P+N MCCB,36 Ka with under voltage,over voltage ,current,earth fault protection ( Make-LEGRAND-DPX3 DB/ Siemens-3VA Model/ Schneider- CVS).
Busbar- 04 numbers of 800Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P RCBO,300MA 12NOS FOR OUT DOOR UNIT ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Out going- (i)32A 4P RCBO,300mA 8NOS FOR OUT DOOR UNIT ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter with CT for voltage, current, frequency, PF, THD indication
2
-
-
... More
350KVAR APFC PANEL
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical Capacitor bank panel of 350 KVAr APFC with 400 A MCCB 3P to be merge with main panel busbar as I/C, all branch protection is with MCB along with capacitor duty contactors, 14% Aluminium Reactor & Capacitor is with 480V AC MPP Technology (The capacitor should have over current withstand capability of 2.5xIn, Peak Inrush withstand capability of 350xIn, Number of Switching operation per year should not less than 15000 & the operating life should be min 200000 hrs) and designed as G.A drawing.s per direction of Engg.-in-Charge. (Make-Higher model of Legrand/Schneider/Siemens or equievalant reputed make with proper specification & model ISI marked as approved )Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.Make-Schneider/siemens/Legrand/ABB
-
-
-
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
-
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
144
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
144
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
122
-
-
... More
Supplying,fixing of FLOOR RACE WAY WITH JUNCTION box GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions of size 38mm(H) x 225mm(W), of MAKE- Profab/OBO/Neidax .(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT.
122
-
-
... More
FLOOR RISING MAIN SYSTEM
-
-
-
... More
Supplying, installing on wall or suspension on ceiling, testing
and commissioning of following capacity Air insulated compact
Type Bus Trunking with reducer required for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-55 rating after fixing the tap off boxes and all accessories, made of 1.6mm
thick steel sheet duly powder coated in convenient sections
complete with 4 Nos aluminium bus bars having current
density of 130 A/ sq cm at nominal current rating, necessary
joints, elbow joints & expansion joints, fire barrier at each floor,
continuous earthing with 2 Nos aluminium strip of suitable size
(one on each side) including, G.I. clamping brackets,
suspenders, angle iron bracket, steel fasteners, connecting to
earthing system etc. as required.Make-Legrand/Schneider/Siemens/ABB/C&S
-
-
-
... More
630 A Isc = 50kA for 1 second(with reducer as per requirement)
40
-
-
... More
Supplying, installation, testing & commisioning of following
capacity End Feed Unit for the existing Air insulated compact
Type bus trunking/ rising mains for use on 3 phase 4 wire 415
volts, 50Hz A.C. supply made with 1.6mm thick steel sheet
enclosure (IP54) duly powder coated with provision of
MCCB/ACB (but without MCCB/ACB) complete with necessary
joints including clamping brackets, angle iron bracket, steel
fasteners, connecting to earthing system etc. as required.Make-Legrand/Schneider/Siemens/ABB/C&S
-
-
-
... More
630 A 50kA SC for 1 sec
2
-
-
... More
Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing rising mains for use on 3 phase 4wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated without MCCB ( complete etc. as required,as per the direction of Engg-in-charge completely Type Tested at NABL Accredited Laboratories as per latest IEC 61439 - 1&6 (Type Test Certificates must be submitted). Busbar to be insulated with multilayered Class F (155 Deg C) PET insulation.Warrentee period must be 5 years & compelete test certificate must be submitted .Make-Legrand/Schneider/Siemens/ABB/C&S
-
-
-
... More
250A 36kA SC for 1 sec
8
-
-
... More
125A 36kA SC for 1 sec
8
-
-
... More
100A 25kA SC for 1 sec
4
-
-
... More
20 PASSENGER BED CUM HOSPITAL LIFT WITH WIRRING(1.1)
-
-
-
... More
Supply,Installation, Testing & Commissioning of of 20 Passenger-cum-bed lift gearless with Machine room Capacity(1360 Kg), with minimum shaft size of 2100mm(Left to right)x2900mm(Front to back) Elevator G+4 Floors with ACVVVF drive/Control with ARD =1.00 MPS, SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc .All SS material shall be of grade SS-304 and minimum thickness of 2.00mm. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respec as per the instruction of Engg. in charge.The Elevator should be suitable for physically handicapped person. make:OTIS/Mitsubishi/Schindler/Johnson
1
-
-
... More
Supply,Installation, Testing & Commissioning of of 13 Passenger lift(884 Kgs) gearless with Machine room Capacity,with minimum shaft size of 2450mm(Left to right)x1700mm(Front to back) Elevator G+4 Floors with ACVVVF drive/Control with ARD =1.00 MPS, SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc . All SS material shall be of grade SS-304 and minimum thickness of 2.00mm.Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respect as per the instruction of Engg. in charge.The Elevator should be suitable for physically handicapped person. make:OTIS/Mitsubishi/Schindler/Johnson
1
-
-
... More
LIGHTENING PROTECTION SYSTEM
-
-
-
... More
Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equeivalent
524
-
-
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equeivalent
250
-
-
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/Equeivalent
30
-
-
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/ Dehn/ Equeivalent
18
-
-
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn/Equeivalent
18
-
-
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.
Tested as per IEC 62561. Make-OBO/Dehn/Equeivalent
10
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn/Equeivalent
20
-
-
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/Equeivalent
20
-
-
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.
Tested for 100kA lightning current. Make-OBO/Dehn/Equeivalent
10
-
-
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/Equeivalent
10
-
-
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/Equeivalent
140
-
-
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/Equeivalent
14
-
-
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. Make-OBO/Dehn/Equeivalent
14
-
-
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/Equeivalent
2
-
-
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/ Dehn/ Equeivalent
10
-
-
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/Equeivalent
10
-
-
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/ Dehn/ Equeivalent
10
-
-
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/Equeivalent
10
-
-
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
-
-
... More
LIGHT SYSTEM
-
-
-
... More
S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make: Panasonic/ LT/ Havells / Philips/ Wipro / Crompton/ Bajaj) (5Years Warranty)
16
-
-
... More
Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.
12
-
-
... More
Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.
12
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
12
-
-
... More
Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
-
... More
Supplying ,installation & fixing of 10-11W(BOLLARD), High efficient LED with extruded Aluminium housing with PC diffuser.CRI70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency80%,THD25%, Powerfactor0.9, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level60V DC as per IEC standard. Luminaire efficacy ≥ (90 lm/W). Make-Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
12
-
-
... More
Supply ,Installation testing commissioning of Asthetically designed 40-45W(post top), High efficient LED comprises with spun aluminium top cover ,dicast aluminium heatsink,frosted polycarbonate diffuser with dicast mounting base arm.CRI70, IP65, Ambient temp-0 to 45DegC, Driver efficiency85%, CCT-4000/5700K,THD10%,Powerfactor0.95, Surge protection-4 kV internal and 10KV external, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard. Luminaire lumen ≥ 4600 lumens (115 lm/W). Similar to Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)l make having warrantied for a period of 5 years . The luminaire to be installed in 6 mtr long GI hot dip galvanized pole with anti corroson,,uv rays stabilized,metal post with covered by resin of Valmount/BAJAJ/RR ISPAT/UTKASH make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCB as per the pole drawing and direction of EIC against which inspection mat take place. It should be installed after making proper size RCC foundation by considering RCC foundation by using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge.
10
-
-
... More
SITC of IP 65 Non-integral flexible LED strip light in 5 mtr length with 12W/Mtr power consuption available with wide beam angle 120 degree is equipped with separate energy efficient isolated electronic driver for safe operation., 3000K with 12 w/mtr @ 5Mtr pool with Driver extra,all required accessories with laying base as required as per direction of Engg.-in-Charge ( MakePanasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 5 years
4
-
-
... More
Supplying, Erection, Fixing, connection & testing of 100W FLOOD Light(120LM/W) of Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty wit including MCB,stainless steel braket along with driver & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
4
-
-
... More
S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
4
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
244
-
-
... More
CABLING
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/ HAVELLS /RR KABEL/ FINOLEX/GLOSTER of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3.5core x 35 sq mm
100
-
-
... More
4core x 16 sq mm
100
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
100
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
100
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x35sq mm
4
-
-
... More
4core x 16 sq mm
4
-
-
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
300
-
-
... More
Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
32mm
160
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materials
2
-
-
... More
UPS SYSTEM
-
-
-
... More
Supply ,installation ,testing & commissioning of 80KVA Parallel UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 100AH, 60 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) LOAD OF OT,ICU) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list & SLD.
1
-
-
... More
ON GRID SOLAR SOLAR PV SYSTEM
-
-
-
... More
Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono / Poly Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on Aluminium / GI structure of suitable strength with following components a complete aas arequired: a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Kamal Solar/ EMMVEE/ Venus / Anchor/panasonic or equievalant reputed make & model A catogory, ISI marked as approved . The entire SOLAR system should be Replacement Warranty will be 5 years
15
-
-
... More
Inverter based VRV/ VRF System
-
-
-
... More
Outdoor Units
-
-
-
... More
Supply,Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type Scroll/Twin rotary Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 380-415 V, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.
The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, automatic refrigerant charging,auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. .The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units.(Make: MITSUBISHI ELECTRIC /DAIKIN/O-General/Hitachi sigma model )
-
-
-
... More
12 HP(For Dialysis,KMC,Opthalmology OT,OT-1,OT-2,Maternity OT)
6
-
-
... More
14 HP (for Cassette & Hi-wall)
1
-
-
... More
16 HP(SNCU-1)
1
-
-
... More
10 HP(SNCU)
1
-
-
... More
20 HP (For Cassette & Hi-wall)
21
-
-
... More
S/I/T/C of ODU Connecting Kit
22
-
-
... More
Supply, Installation,Testing and Commissioning of following minimu capacity 4-way/ VRV Cassette Type Indoor ceiling mounted unit equipped with cord less remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. .
-
-
-
... More
1.05 TR
35
-
-
... More
1.20 TR
14
-
-
... More
1.5 TR
36
-
-
... More
2.0 TR
22
-
-
... More
2.5 TR
23
-
-
... More
3 TR
40
-
-
... More
4.0 TR
7
-
-
... More
Supply,installation,Testing & commissioning of Y joints to connect various indoor unit to outdoor unit
186
-
-
... More
Supply,Installation,Testing & commissioning of centralised I-Touch Manager indoor units. This should be Touch screen type with necessary adaptors .(Make: MITSUBISHI ELECTRIC /DAIKIN/O-General/Hitachi sigma model )
1
-
-
... More
Supply, Installation,Testing and Commissioning of following minimum cpacity Wall Mounted Type Indoor unit equipped with cord less remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. (Make: MITSUBISHI ELECTRIC /DAIKIN/O-General/Hitachi sigma model )
-
-
-
... More
2.06 TR
2
-
-
... More
2.5 TR
2
-
-
... More
AHU For OT
-
-
-
... More
AIR HANDLING UNIT - 2 Stage Filtration- with VFD -Supply, Installation, testing and commissioning of factory fabricated double skin type Air Handling Units (BMS compatible) Floor Mounted Units with fire dampers for High Precision Zones as per specifications given below:-AHU Construction:- It shall be made out of min.0.6 mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain stainless steel sheet inside with 50 mm thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 38 kg/Cum between them. Drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile. Necessary foundation required & anti vibration pads shall be provided & cost for the same shall be included in this item. Supply Air Stream:- 1) Filter section consisting of pre filter and microvee/fine filter . Pre-filter section shall be with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine/microvee filter section will be with filters of non woven synthetic media of 3 micron particle size of efficiency 99%.2) BACKWARD CURVED PLUG/Centrifugal fans (with min. 70% efficiency) with blower motor, drive and flexible duct connection. The supply fan shall be provided with variable frequency drive and input / output signal compatible to BMS system.3) 6 row deep cooling coil 4) No Heating Coil Required 5) 50 mm Thick Puf Panel with Inner and outer Sheet of .6 mm thick both Side 6) Mixing Box comprising of damper & filter section.COIL- Copper tubes and Aluminium fins 12-13 fin./inch, Coil size shall be selected for air velocity of 500 ft/minute 12deg Celcius coil leaving temp & velocity across filters at 500 ft/minute. 7) 4.5 kW Heater bank.Motors shall be suitable for 415 ± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(IE 3). Vibration isolation shall be as per specifications and as shown on the drawings. VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad & display) , IP-54 enclosure for use on standard BACKWARD CURVED PLUG/Centrifugal fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. IP 20 Rated VFD to be placed inside the Stater Panel with IP 55 enclosure. Each VFD panel to be provided with digital display showing electrical parameters like voltage,current and power consumption.Sound level 72 db at the distance of 2 mtr.(maximum)Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high efficiency (IE-3 Efficiency), H.P of motor and coil shall be as per actual selection meeting other technical requirements. At the time of odering ahu total pressure loss as per friction method and ahu coil selection should be submitted for approval. Room design temp-19 deg celcius/RH-55%,INTAKE AIR DBT/RH-19 Deg. Cel./55%, Discharge air DBT/RH-12/96%. if any increase in head, no additional cost will be paid by the agency.4000 CFM / 17TR/6 RD CC / 110 mm TSP with Pre & Fine Filter - (Make:- VTS/ Trane/Systemair/Edgetech) For Major OTs
1
-
-
... More
AIR HANDLING UNIT - 2 Stage Filtration- with VFD -Supply, Installation, testing and commissioning of factory fabricated double skin type Air Handling Units (BMS compatible) Ceiling Mounted Units with fire dampers for High Precision Zones as per specifications given below:-AHU Construction:- It shall be made out of min.0.6 mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain stainless steel sheet inside with 50 mm thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 38 kg/Cum between them. Drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile. Necessary foundation required & anti vibration pads shall be provided & cost for the same shall be included in this item. Supply Air Stream:- 1) Filter section consisting of pre filter and microvee/fine filter . Pre-filter section shall be with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine/microvee filter section will be with filters of non woven synthetic media of 3 micron particle size of efficiency 99%.2) BACKWARD CURVED PLUG/Centrifugal fans (with min. 70% efficiency) with blower motor, drive and flexible duct connection. The supply fan shall be provided with variable frequency drive and input / output signal compatible to BMS system.3) 6 row deep cooling coil 4) No Heating Coil Required 5) 50 mm Thick Puf Panel with Inner and outer Sheet of .6 mm thick both Side 6) Mixing Box comprising of damper & filter section.COIL- Copper tubes and Aluminium fins 12-13 fin./inch, Coil size shall be selected for air velocity of 500 ft/minute 12deg Celcius coil leaving temp & velocity across filters at 500 ft/minute. Motors shall be suitable for 415 ± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(IE 3). Vibration isolation shall be as per specifications and as shown on the drawings. VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad & display) , IP-54 enclosure for use on standard BACKWARD CURVED PLUG/Centrifugal fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. IP 20 Rated VFD to be placed inside the Stater Panel with IP 55 enclosure. Each VFD panel to be provided with digital display showing electrical parameters like voltage,current and power consumption.Sound level 72 db at the distance of 2 mtr.(maximum)Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high efficiency (IE-3 Efficiency), H.P of motor and coil shall be as per actual selection meeting other technical requirements. At the time of odering ahu total pressure loss as per friction method and ahu coil selection should be submitted for approval.Room design temp-24 deg celcius/RH-55%,INTAKE AIR DBT/RH-24 Deg. Cel./55%, Discharge air DBT/RH-12/96%. if any increase in head, no additional cost will be paid by the agency.The ceiling suspended unit should be placed outside the SNCU AND DIALYSIS UNIT. 75 mm TSP with Pre & Fine Filter - (Make:- VTS/ Trane/Edgetech/Systemair)
-
-
-
... More
Capacity -12 TR 4500 CFM /75mm SP/6RD.(SNCU-1)
2
-
-
... More
Capacity -10 TR 4000 CFM /75mm SP/6RD.(KMC&Dialysis )
2
-
-
... More
SITC of 2 hr fire rated smoke exhaust fan of 2500CFM 75 mm Static Pressure (For SNCU).Make-Krugger/Nicotra/Systemaire
1
-
-
... More
SITC of exhaust fan 400CFM 15 mm Static Pressure (For Injection Room, Dead body Room, Plaster Room, Dressing Room)Make-Krugger/Nicotra/Systemaire
5
-
-
... More
Refrigerant Piping
-
-
-
... More
Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/A-Flex Make of pipe-Rajco/Mandev
-
-
-
... More
41.3 mm
234
-
-
... More
34.9 mm
222
-
-
... More
28.6 mm
245
-
-
... More
22.2 mm
250
-
-
... More
19.1 mm
290
-
-
... More
12.7 mm
290
-
-
... More
15.9 mm
300
-
-
... More
9.5 mm
300
-
-
... More
6.4 mm
210
-
-
... More
Drain Piping
-
-
-
... More
Providing & fixing of PVC Pipe complete with fittings, supports as per specifications and duly insulated with 9 mm thickness Class O of closed cell nitrile rubber/XLPE as per direction of Engineer-in-charge & specifications enclosed as reqd.
-
-
-
... More
50 mm dia
266
-
-
... More
40 MM dia
266
-
-
... More
32 mm dia
380
-
-
... More
Control & Transmission Wiring
-
-
-
... More
Providing & fixing control cum transmission wiring of 2 core x 1.0 sqmm shielded copper cable in suitable conduits between indoor and out door unit. Make-Polycab/ Finolex/RR Kabel/Gloster
1450
-
-
... More
Gas Charging for the entire circuit(R410A)
175
-
-
... More
Air Distribution (OT)
-
-
-
... More
Supply, Manufacturing, fixing,testing and commisioning of Alluminium ducting complete with supports,dampers etc.as per specifications. MakeTATA/SAIL/JINDAL
-
-
-
... More
22 Gauge Al.sheet.
260
-
-
... More
24 Gauge Al.sheet.
412
-
-
... More
Insulation work
-
-
-
... More
Supply,installation,testing and commissioning of duct thermal insulation of Following Capacities , Make - Armacell/A flex/K flex . - with 25 mm thick Nitrile Rubber for indoor supply air ducting
412
-
-
... More
Accoustic Insulation 15 mm thick of Armasound open cell nitrile rubber
260
-
-
... More
Flexible canvas connection
16
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated grilles with VCD having flange all around.Make-Glenstorm/Airflow/Systemaire
6
-
-
... More
Supply, erection, testing & commissioning of Aluminium powder coated grilles without VCD having flange all around.Make-Glenstorm/Airflow/Systemaire
6
-
-
... More
Fire fighting
-
-
-
... More
PUMPS AND APPURTENANCES
-
-
-
... More
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge (Make:PUMP:KBL/ Grundfos / KSB/ Wilo)
1
-
-
... More
Supply , installation, testing & commissioning of Diesel Engine driven end suction Back pullout type Centrifugal pump having 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal and suitable diesel engine complying to TAC norms along with all accessories including control wiring between panel & DG set and fuel storage tank including providing base frame coupling,coupling guard as per direction of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo)
1
-
-
... More
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal Jocky pump delivering 180 LPM at 70Mtr head with CI casing bronze impeller , SS shaft with mechanical seal and 2 pole TEFC electric motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply including providing base frame coupling,coupling guaaard as per direction of Engineer-in-charge..(Make:Kirlosker/ Gunfoss / KSB/ wilo)
1
-
-
... More
Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 MWC head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame , 2 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV as required
1
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by Red out & inside gray powder cote paint is designed as G.A drawing. (FOR FIRE FIGHTING) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
INCOMING: One(1)- 400 Amp 36 KA TP with solid neutral SDFU with HRC fuses 3 nos (Make-HPL/L&T/Siemens/Schneider) including 01 no of MFM with RS 485, 3 Nos 400/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and SP 6A MCB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9). . Busbar- 04 numbers of 500Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. OUTGOING: a)One(1)-250 Amp 36kA TP MCCB with ROM 36kA with adjustable MICRO PROCESSOR Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS), along with star delta starter incorporating 3 nos Power 3P contactor with top add on(2NO+2NC) ,Bimetal OLR of suitable rating,axulary contactor , ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter .
b) 1 No (Outgoing) – 63 Amp 36kA TP MCCB with ROM 36kA with adjustable MICRO PROCESSOR Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS), along with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S
c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel,hotor, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of. One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.
-
-
-
... More
One (1) - Set of Auxilliary relay for automatic operation through pressure switch.
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on Cable
-
-
-
... More
3C X 70 sqmm
88
-
-
... More
3C X 16 sqmm
100
-
-
... More
Cable tray
-
-
-
... More
Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.
-
-
-
... More
150 mm (W) X 50 mm (H) with 1.2 mm thick sheet
100
-
-
... More
450 mm (W) X 50 mm (H) with 1.6 mm thick sheet
88
-
-
... More
Cable laying
-
-
-
... More
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
-
-
-
... More
Upto 35 Sqmm
80
-
-
... More
Above 35 Sqmm and upto 95 sqmm
86
-
-
... More
End Termination
-
-
-
... More
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
3C X 70 sqmm
4
-
-
... More
3C X 16 sqmm
4
-
-
... More
PIPE & VALVES ETC.
-
-
-
... More
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.Make-TATA/JINDAL/SAIL
-
-
-
... More
200mm NB
20
-
-
... More
150mm NB
188
-
-
... More
100mm NB
188
-
-
... More
80mm NB
32
-
-
... More
65mm NB
750
-
-
... More
50mm NB
120
-
-
... More
40mm NB
88
-
-
... More
32mm NB
311
-
-
... More
25mm NB
444
-
-
... More
Supply,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size including laying in ground after excavation and refilling of trench along with providing 4mm thick pipecoat for underground pipe after applying wrapping coating primer as required as per direction of Engineer-in- charge.Make-TATA/JINDAL/SAIL
-
-
-
... More
150mm NB
98
-
-
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.Make-Zoloto/Kartar/Kirloskar/Leader
-
-
-
... More
150mm NB
5
-
-
... More
100mm NB
4
-
-
... More
80mm NB
2
-
-
... More
SITC of CI Gate valves as per IS:14846 and rising sprindle type with flanges, bolts, nuts, washers , gaskets, etc.Make-Zoloto/Kartar/Kirloskar/Leader
-
-
-
... More
200mm NB
2
-
-
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Zoloto/Kartar/Kirloskar/Leader
-
-
-
... More
150mm NB
5
-
-
... More
100mm NB
4
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.Make-H.Guru/G.Guru
4
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.Make-Danfoss/Grundfoss/Indfoss
4
-
-
... More
Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Zoloto/Kartar/Kirloskar/Leader
-
-
-
... More
150mm NB
2
-
-
... More
100mm NB
2
-
-
... More
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.
1
-
-
... More
WET RISER CUM DOWN COMER SYSTEM
-
-
-
... More
Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex
30
-
-
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex
30
-
-
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex
60
-
-
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex
30
-
-
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.Make-Minimax/Newage/Fireshield/Safex
30
-
-
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
6
-
-
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Zoloto/Karatr/Kirloskar
2
-
-
... More
SPRINKLER SYSTEM
-
-
-
... More
Supply,Installation,Testing & Commissioning of Pendent/ Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge. Make-Tyco/HD/Viaking
1422
-
-
... More
Supply,Installation,Testing & Commissioning of Cast Iron Ball Valve with teflon seals, Stainless steel Ball & Stem, MS Lever with PVC Coating As Per IS: 9890 ISI Marked. Make-Tyco/HD/Viaking
24
-
-
... More
Providing, fitting and fixing of C.I. single Air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC. Make-Tyco/HD/Viaking
4
-
-
... More
Providing & fixing of 25 mm size Gunmetal Pressure Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge. Make-Tyco/HD/Viaking
4
-
-
... More
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge. Make-Tyco/HD/Viaking
1422
-
-
... More
Providing and fixing of electric flow switch with mechanical time delay feature capable of sensing a minimum of flow of one sprinkler , including making electrical cable termination through input module & integrated with Fire Alarm System.Make-Honeywell/eq.
10
-
-
... More
Supplying, installing, testing and commissioning of hydralically operated Sprinkler control valve (150mm)complete with water motor gong bell, basic trims as required, pressure gauges, pressure switch, drain valves, ball valves etc. complete. Alarm valve shall be UL Listed / FM approved.Make-system sensor/siemens
1
-
-
... More
EXTINGUISHER SYSTEM
-
-
-
... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make-Safex/Fireshield/Ceasefire
30
-
-
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. Make-Safex/Fireshield/Ceasefire
30
-
-
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
-
-
... More
AUTOMATIC FIRE ALARMING SYSTEM
-
-
-
... More
Supply, Installation,Testing & Commisioning of Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward
2
-
-
... More
4 Loop
-
-
-
... More
Supply, Installation, Testing & commissioning of Analog Addressable smoke cum heat detector withinbuilt isolator module and status indicator . Make-Morley IAS/Siemens/Bosch/Edward
1400
-
-
... More
Supply, Installation, Testing & commissioning of Addressable Manual Call Point soft addressable type with in built fault isolator as required.Make-Morley IAS/Siemens/Bosch/Edward
40
-
-
... More
Supply, Installation, Testing & commissioning ofAddressable Loop Powered Hooter cum Strobe (sound output of minimum 90db) cum strobe (strength of light 10cd) complete with inbuilt isolator as required. Make-Morley IAS/Siemens/Bosch/Edward
40
-
-
... More
Supply & Fixing of 2 core 1.5 sq.mm, multi strand, copper conductor, FRLS (Fire Retardent Low Smoke)-PVC insulated GI Screened Armoured cable with saddle and required accessories.& Power Cable. Make-Polycab/RR cable/finolex/havells
5000
-
-
... More
PA SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required .Make. Honeywell/Bose/Bosch
1
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 1000 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make. Honeywell/Bose/Bosch
1
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/15 Watt in ABS enclosure complete as required Make. Honeywell/Bose/Bosch
60
-
-
... More
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits.
2155
-
-
... More
SIGNAGES
-
-
-
... More
SIGNAGES:-Providing and installing in position the following type of sign boards made out of 3mm thick flexyle photoluminescent based glow in dark sheeting with luminous properties enclosed in a weather proof Uvstabilized film with UV screen printing by imported links pasted over3 mm thick cast acrylic from front side with 6 mm thick acrylic, -20 to+80 deg C, Suitablefor indoor use, greenish yellow, glow visible upto 4-6 hr in total darkness.Make-Prolite/Bajaj or Equivalent
4600
-
-
... More
Illumination Glow light for Exit Indication with Battery Back-up.Make-Prolite/Bajaj or Equivalent
14
-
-
... More
S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time ≥ 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A1) size on steel frame with cc work.
1
-
-
... More
S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time ≥ 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A3) size on steel frame with cc work.
10
-
-
... More
FIRE SUPPRESSION SYSTEM
-
-
-
... More
Supply , Installattion,Testing and Comissioning of 5LB Clean Agent System Complete with all Necessary Clean Agent FK-5-1512 /novec 1230 (UL listed )gas with PESO approved cvlinder fitting support and accessories,connected with CE,PI Mark & PESO approved DLP valve,End of line Adaptor and pressure switch Cylinder will be Helium Leak Tested to 10-7 mbar I/S for leakage proof Make:SUPREMEX/FIREBOY/AMEREX
1
-
-
... More
Supply and Laying of Linear Pneumatic Heat Detection Tube with all Necessary Fittings & Supports.
50
-
-
... More
Supply , Installattion,Testing and Comissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should Have Provision for Integration with Fire Alarm/SCADA/BMS System. Make:SUPREMEX/FIREBOY/AMEREX
1
-
-
... More
Supply and Laying UPVC Pipe (80 schedule ) of Following Dia-Meter Burried in Ground at Appropriate Depth for Cable
55
-
-
... More
ELV SYSTEM
-
-
-
... More
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Systimax/Panduit
14500
-
-
... More
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box Make: Legrand/Systimax/Panduit
90
-
-
... More
Supply & fixing of Cat6 24 Port Jack Panel loaded with individual keystone:Make: Legrand/Systimax/Panduit
22
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord,1mtr, Make: Legrand/Systimax/Panduit
510
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord, 2mtr. Make: Legrand/Systimax/Panduit
36
-
-
... More
Supply & Installation of 6F Single Mode Armoured FO Cable through existing conduit. Make: Legrand/Systimax/Panduit
4255
-
-
... More
Supply, Installation,Testing & Commisioning of 24 Port Rack Mount Loaded LIU including SM SC Adaptor and Pigtail. Make: Legrand/Systimax/Panduit
1
-
-
... More
Supply, Installation,Testing & Commisioning of 6Port Rack Mount Loaded LIU including SM SC Adaptor and Pigtail. Make: Legrand/Systimax/Panduit
22
-
-
... More
Supply, Installation,Testing & Commisioning of Single Mode SC-LC Type OFC Patch Cord, 2mtr length.Make: Legrand/Systimax/Panduit
24
-
-
... More
Supply & Installation of 1000Base LX Fiber Transceiver. Make: Cisco/Digisol/HP
24
-
-
... More
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 270 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Cisco/HP
22
-
-
... More
Supply and installation of 19" Rack mountable cloud managed Internet Gateway having user configurable LAN/WAN ports 8 x 10/100/1000 Mbps BaseT Ports with 2 x 1Gbps SFP Ports supporting minimum 9 WAN Ethernet Interface. The Gateway should minimum support simultaneously internet user of 1000 clients. Should minimum support 2.5 Gbps Internet Bandwidth. The Gateway should support L3 Routing features like Static, RIPng, OSPFv3. Gateway Level customised Web/URL filtering with L7 Deep Packet Inspection and real time application and user level access control involving access, denial, monitoring, logging and reporting at gateway level.Make-HP/Juniper/Cisco/Ruijie
1
-
-
... More
Supply and installation of 24 Port Gigabit Fiber Ethernet Access Layer 3 Switch with 16 100/1000Base-XSFP + 8GE Combo(RJ45/SFP)+4 10 Gigabit SFP+ Uplink Ports, Switching Capacity 128Gbps, Throughput 95 Mpps ,CPU ARM7 800M , Packet Buffer Memory 1.5 MB ,MAC Address 16K , ACL Table 1K ,Jumbo frame 10k ,Switch should support IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4) ,Switch should support Static Routing, RIPv1/v2, OSPFv2,BGP4,OSPFv3, BGP4+Temperature Working 0°C~50°C, storage -40°C~75°C, Power Supply AC: 100~240VAC, 50~60Hz + 12VDC RPS. Digisol(Model No. DG-GS4628SE2)/Cisco/HP/Juniper
1
-
-
... More
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable manager and H/W Pkt. Make : Valrack/Rittal/APW
22
-
-
... More
Supply & fixing of 24U 600/650D UL Listed Floor mount Rack loaded with one no 10Skt 5/15A power distribution unit, 4nos cable manager, Four nos 90CFM FANs, 1no HD Self and one pkt H/W screw. Make : Valrack/Rittal/APW
2
-
-
... More
Subhead- 2 (IP-CCTV System)
-
-
-
... More
Supply, Installation, Testing & Commissioning of Full High Definition 5MP( 2880 x 1624) resolution vandal proof dome/bullet camera, 1/3" Progressive Scan CMOS Sensor, IR Cut mechanical Filter for True Day & Night vision, Support dual streams, Onvif supported, IP66 Weather proof outdoor enclosure, Inbuilt Smart IR LEDs with intensity control, IR 30 mtr, H.264 / H.265, Supports android and iOS APP for Smart phone and tablets, with Inbuilt audio, -10°C to + 50°C, CE, FCC, RoHS . Make-Honeywell series 20/Pelco/Axis
188
-
-
... More
Supply, Installation,Testing & Commisioning of 64 Chanel 4K H.265 Pro NVR with support 8*SATA HDD.Make: Honeywell series 20/Pelco/Axis
3
-
-
... More
Supply, Installation,Testing & Commisioning of Surveliance 8 TB HDDMake:- WD/Segate/Toshiba
24
-
-
... More
Supply & installation of 55'' IPS Ultra HD AI for 24x7 application TV.Make:LG/Samsung/Sony
4
-
-
... More
P.H. WORK
Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 ) and pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge.
-
-
-
... More
In G floor
-
-
-
... More
20mm dia CPVC pipe
150
-
-
... More
25mm dia CPVC pipe
140
-
-
... More
32mm dia CPVC pipe
60
-
-
... More
40mm dia UPVC ASTM pipe
50
-
-
... More
50mm dia UPVC ASTM pipe
50
-
-
... More
In F floor
-
-
-
... More
20mm dia CPVC pipe
140
-
-
... More
25mm dia CPVC pipe
150
-
-
... More
32mm dia CPVC pipe
60
-
-
... More
40mm dia UPVC ASTM pipe
50
-
-
... More
50mm dia UPVC ASTM pipe
10
-
-
... More
In 2nd floor
-
-
-
... More
20mm dia CPVC pipe
100
-
-
... More
25mm dia CPVC pipe
75
-
-
... More
32mm dia CPVC pipe
70
-
-
... More
40mm dia UPVC ASTM pipe
80
-
-
... More
50mm dia UPVC ASTM pipe
10
-
-
... More
In 3rd floor
-
-
-
... More
20mm dia CPVC pipe
140
-
-
... More
25mm dia CPVC pipe
170
-
-
... More
32mm dia CPVC pipe
60
-
-
... More
40mm dia CPVC pipe
60
-
-
... More
50mm dia UPVC ASTM pipe
10
-
-
... More
In 4th floor
-
-
-
... More
20mm dia CPVC pipe
90
-
-
... More
25mm dia CPVC pipe
100
-
-
... More
32mm dia CPVC pipe
50
-
-
... More
40mm dia CPVC pipe
70
-
-
... More
50mm dia UPVC ASTM pipe
10
-
-
... More
In 5th floor
-
-
-
... More
32mm dia CPVC pipe
50
-
-
... More
40mm dia CPVC pipe
100
-
-
... More
50mm dia CPVC pipe
100
-
-
... More
50mm dia UPVC ASTM pipe
35
-
-
... More
Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge.
-
-
-
... More
G.F.--250mm thick wall
35
-
-
... More
F.F.--250mm thick wall
38
-
-
... More
S.F.--250mm thick wall
35
-
-
... More
T.F.--250mm thick wall
40
-
-
... More
4TH.F.--250mm thick wall
20
-
-
... More
5TH.F.--250mm thick wall
20
-
-
... More
Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
220
-
-
... More
In First floor
200
-
-
... More
In 2ND floor
140
-
-
... More
In3RD floor
200
-
-
... More
In 4TH floor
130
-
-
... More
Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
15 mm dia CP Long body Bib cock( FLR-MCH-5043N Jaquar make )
25
-
-
... More
15mm dia CP Short Body Bib Cock (Jaquar) KUP-CHR-35037PM
17
-
-
... More
2 WAY BIB COCK WITH WALL FLANGE (Jaquar) KUP-CHR-35041PM
110
-
-
... More
15mm dia CP ANGULAR STOP COCK WITH WALL FLANGE (Jaquar) KUP-CHR-35053PM
230
-
-
... More
20mm dia CP CONCEALED STOP COCK EXT HVY WTH W FLANGE( FLR-MCH-5083NJaquar ) Make
25
-
-
... More
HAND SHOWER (HEALTH FAUCET) WITH 1 METER (Jaquar- ALD-CHR-565
110
-
-
... More
25mm dia PVC Ball valve
40
-
-
... More
40mm dia PVC Ball valve
30
-
-
... More
50mm dia brass or gun metal fullway valve(Shakti Make)
20
-
-
... More
15mm dia. C.P extension piece
432
-
-
... More
15mm dia. C.P flange
432
-
-
... More
15mm dia C.P. Pillar cock 15mm dia brass pillar cock (Jaquar) KUP-CHR-35001PM
141
-
-
... More
SINGLE LEVER SURGICAL PURPOSE ELBOW ACTI (Jaquar) FLR-CHR-5166
27
-
-
... More
15mm dia CP SINK cock (Jaquar)FLR-CHR-5347N
4
-
-
... More
Jaquar Urinal Valve auto closing system (Jaquar cat no- PRS-CHR-077)
20
-
-
... More
32mm Full Thread Waste Coupl. (Jaquar) ALD-CHR-705
20
-
-
... More
450mm Braided hoses (Jaquar- ALD-CHR-805B/ Johnson/Hindware)
20
-
-
... More
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge
-
-
-
... More
110mm dia. U-PVC SWR pipes(Ori-plast make Type-A)
1700
-
-
... More
110mm dia. U-PVC SWR pipes(Ori-plast make Type-A)for rain water
500
-
-
... More
110mm dia. U-PVC door bend
120
-
-
... More
110mm dia. U-PVC door tee
90
-
-
... More
110mm dia. U-PVC "P" trap
76
-
-
... More
110mm dia. U-PVC plain shoe bend
36
-
-
... More
110mm dia. U-PVC offset without ear
80
-
-
... More
110mm dia. U-PVC vent cowl
101
-
-
... More
110mm dia. U-PVC socket plain
102
-
-
... More
75mm dia. U-PVC SWR pipes(Ori-plast make Type-A)
135
-
-
... More
75mm dia. U-PVC "P" trap
10
-
-
... More
125mm dia CP grating
99
-
-
... More
UPVC clamp for 110mm upvc pipe
340
-
-
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
250mm to 375mm thick wall
170
-
-
... More
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
Jaquar wall hung Wash Basinmodel FNS-WHT-40801 and Half Pedestal Model FNS-WHT-40305,
75
-
-
... More
Under counter basin(Hindware)No.10095+ALD-CHR-709+ALD-CHR-803AB+KUB-35001F
66
-
-
... More
Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
... More
B.E.Mirror
75
-
-
... More
Design Mirror(Parryware)
66
-
-
... More
Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
600mmx125mm size glass shelf with C.P gruard rail(Jaquar-ACN-CHR-1171N)
75
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail(Jaquar make-AHS-CHR-1501)
25
-
-
... More
CP Towel Ring (Jaquar) ACN-CHR-1121N
108
-
-
... More
Double coat hook (Cat. No. AKP-CHR-35761P of Jaquar)
25
-
-
... More
Jaquar- CP Towel Rack with LowerHanger(Stainless Steel)with 3 hooks(Chrome Finish) Model No AHS-CHR-1581H
25
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
Chromium Plated Shower bracket small (CP soap holder) (JaquarModel No CAN-CHR-1177N)
127
-
-
... More
Toilet Paper Holder (Jaquar) ACN-CHR-1153S
30
-
-
... More
Liquid Soap dispenser with glass bottle. Soap Dispenser with Glass Bottle (Jaquar) ACN-CHR-1135N
75
-
-
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Flat back large urinal Jaquarmodelno URS-WHT-13261H.
41
-
-
... More
15mm dia urinal spreader
41
-
-
... More
32mm dia C.P. dome waste
41
-
-
... More
Urinal Partition (JAQUAR)JSE-CHR-810US450X
22
-
-
... More
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
580mm O.W.C. (Parryware/ Neycer/ Hindware )
17
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Hindware slick cat no-20011 (S-28.5/P-18) Starwhite EWC SLICK size-52x36x39 cm
80
-
-
... More
EWC with 'p' / S trap plain Rimless Single piece-Jaquar-VGS WHT-81853S300UF
30
-
-
... More
Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge
-
-
-
... More
10 Liters capacity PVC cistern with 32mm dia flush bend. sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm(Hindware)21029
97
-
-
... More
Supplying & fixing of Matrix Set-1 Mat code-70002,EWC : (P-18) (WB 46X36 with one pair mounting brackets, EWC & cistern complete with fittings & seat cover, one no hinged rail 76 cm and 4 nos of grab rail 60cm complete with all as per specification & direction of the Engineer in charge.
2
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge
-
-
-
... More
O/HEAD SHW. SINGLE FLOW 100mm DIA (ABS CP) (Jaquar OHS-CHR-1989)
25
-
-
... More
SHOWER ARM CASTED 190mm LONG FLATE SHAPE (Jaquar SHA-CHR-483)
25
-
-
... More
Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
... More
600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
20
-
-
... More
Providing and fixing porcelain sink as per with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. size 600mmx450mmx200mm.
11
-
-
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.
-
-
-
... More
In Ground floor/F.Floor/S.Floor
-
-
-
... More
141x0.75x2.1=
222.08
-
-
... More
Supply all materials, labour, T&P and providing fitting & fixing (Aqua guard) pure Chill 80 PSS UV of size 750x570x1350 mm height with water storage capacity 120 liters along with 2 nos of fancets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc. all complete as per approved drawing, specification and direction of the EIC.
8
-
-
... More
SS Stand for Aquaguard
8
-
-
... More
External P.H Works
-
-
-
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
-
-
-
... More
Inside size 250mmx250mm
38
-
-
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 760mmx760mmx460mm
65
-
-
... More
---- do --- addl depth of 0.15m upto 0.90m
10
-
-
... More
R.C.P.C Cover(18" round man hole cover)
75
-
-
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Man hole chamber Inside size 910mmx910mmx910mm
38
-
-
... More
---- do --- addl depth of 0.30m upto 4.50m depth
10
-
-
... More
R.C.P.C Cover(24" round man hole cover)
48
-
-
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with RCC RING, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
RCC rings soakway pit 1.22m dia x 2.10m deep
6
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
378
-
-
... More
160mm dia u-pvc pipe alround concrete
480
-
-
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
2000litre capacity water storage tanks (Sintex/Oriplast/Supreme Make)(over the roof of 4th Floor)
12
-
-
... More
200mmx150mm Large Tube Well through DTH method.- 2 No.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore 0mtr to 30mtr =
60
-
-
... More
Drilling of 200mm dia bore 31mtr to 45mtr =
30
-
-
... More
Drilling of 150mm dia bore 41mtr to 120mtr =
180
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs x2=
60
-
-
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes 31 mtr to 45 mtrs x2=
30
-
-
... More
Cost of 200mm dia P.V.C schedule-80 pipe =
92
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH/Rotary Rig
2
-
-
... More
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
... More
Sanitary sealing upto 5mtrs below ground level.
2
-
-
... More
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
0.4
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type (Horizontal)submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
2 H.P single phase 7 stage head range 47 to 76 metres, discharge 170 to 67 L.P.M with outlet dia of 50mm ( VERTICAL PUMP MOTOR)
2
-
-
... More
3 H.P single phase 7 stage head range 47 to 76 metres, discharge 170 to 67 L.P.M with outlet dia of 50mm ( HORIZONTAL PUMP MOTOR)
2
-
-
... More
DOL Control panel
4
-
-
... More
32mm dia steel short piece
8
-
-
... More
Well cap
2
-
-
... More
50mm size CI bracket
4
-
-
... More
2.50 sqmm flate cable
220
-
-
... More
20mm dia rigid UPVC pipes
60
-
-
... More
Steel rope with cover
100
-
-
... More
Labour charges for lowering including transportation
3
-
-
... More
Construction of 100 users RCC septic tank-2Nos
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
118.8
-
-
... More
- do - with addl. Depth of 1.5 m
75.24
-
-
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
6.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
55.74
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Roof slab
74.3
-
-
... More
For RCC wall
256.8
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
44.6
-
-
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
167.64
-
-
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
4
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
20
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
21.6
-
-
... More
Construction of 30000 Liters RCC Over head Tank of Outside size- 5.50 X 4.80 X1.50m- In Fifth floor
-
-
-
... More
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
16.77
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
-
-
-
... More
@ 100 kg / cum =
16.77
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
50.18
-
-
... More
RCC Beam, Column, wall etc
91.61
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
60.02
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
-
-
-
... More
Quantity same as item No-4
60.02
-
-
... More
Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete
100
-
-
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
-
... More
Construction of 100000 Liters RCC Under ground Reserver of Inside size- 10.00x5.50x2.10m
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
126.36
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
101.09
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
25.27
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
13.95
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
53.92
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
53.92
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
61.6
-
-
... More
RCC Beam, Column, wall etc
165.75
-
-
... More
RCC Plinth bend/ Raft
27.68
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
139.9
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
139.9
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
120
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
-
-
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
69.3
-
-
... More
De-watering
100
-
-
... More
Construction of 6.75mx3.60m x 1.40m(h) Rain water harvesting system- 1 Nos.
-
-
-
... More
Sinking of tube well through D.T.H.Rig.
-
-
-
... More
200mm dia- 0.0m to 30.00m
25
-
-
... More
Lowering of PVC casing pipe inside bore.
-
-
-
... More
200mm dia- 0.0m to 30.00m
25
-
-
... More
Cost.of 200mm dia (Sch.80)Pipe
25
-
-
... More
Cutting slot in casing pipe for recharge of rain water
25
-
-
... More
Labour for packing gravel outside the tube well
2.35
-
-
... More
Cost of washed gravel.
2.35
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
66.69
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.08
-
-
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.4
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
91.2
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
48.6
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Roof slab-
3.13
-
-
... More
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.42
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.42
-
-
... More
Providing and filling filter media
-
-
-
... More
40mm size bolder-
12.75
-
-
... More
20mm size washed gravel-1x6.0x2.50x0.40=6.00
6
-
-
... More
Course sand-1x6.0x2.50x0.30=4.50
4.5
-
-
... More
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
3
-
-
... More
Solar Water heating System
-
-
-
... More
Supply of Solar flat plate Collectors.of make Supreme Solar/Greentek India/ Radient Energy or equivalant as per direction of Engineer in charge.
32
-
-
... More
Supply of 35Kw 1000LPD/Hr Air Sorce Heat Pump ofmake Thermex/Brio/Neo or equivalant as per direction of Engineer-in-Charge.
1
-
-
... More
Supply of Hot Water insulated pressurized Storage Tank made out of stain less steel SS304grade–2500 ltrs capacity of make Parkland/Radient or equivalant as per direction of Engineer-in-charge.
2
-
-
... More
Supply of NonreturnvalveandSSfittings., 2 nos of Circulation cum pressure pump of make WILO/ GROUNDFOUS with 4 nos Electrical Backup Heater(6KW) internal Kitech pipes and fittings, 40 nos MS power coated Stand for fixing of solar plates etc. as per requirement at siteetc complete as per direction of Engineer-in-charge
1
-
-
... More
Installation of all the above materials on the roof including fitting and fixing of Insulated tank, circulating pump, back-up heater, piping arrangement etc complete with functioning of solar water heating system etc complete as per standard specification and direction of Engineerin-charge
1
-
-
... More
MEDICAL GAS PIPELINE SYSTEM
-
-
-
... More
OXYGEN SYSTEM
-
-
-
... More
Oxygen Gas Outlet Point
114
-
-
... More
SITC for Oxygen Outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Manifold 10+10 With Tail Pipe & Nrv
1
-
-
... More
SITC of oxygen manifold of Size (10 working + 10 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 20 nos. pig tail pipes. it should be suitable to withstand a working pressure of 145 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required. (Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Manifold 3+3 Emergency With Regulator
1
-
-
... More
SITC of oxygen manifold of Size (3 working + 3 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 6 nos. pig tail pipes. it should be suitable to withstand a working pressure of 130 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Fully Automatic- Control Panel
1
-
-
... More
SITC of fully Automatic pneumatically operated oxygen control panel. Visual indication of the manifold is provided by 3 guages within control panel, Indicating Pressure of the right & Left hand bank and the supply pressure from control panel to distribution system with sensing faciliteies to provide visual signals na other anciliary services such as heaters. Pannel should be fitted with audio alarm indication for changeover of empty cylinder. The entire manifold will be hydraulically tested at 130 Kg/Cm2 pressure, duly degreased foroxygen Service, and supplied in sealed cover, ready for assembly at site etc. complete as required.
(Note : Excluding Supply of cylinder.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Flow Meter With Humdifire Bottle
84
-
-
... More
SITC for Oxygen flowmeter complete with humidifier bottle, The flow meter must be constructed with chromium plated brass body, extremely robust, to take care of the day to day usage demand. Flow meter cartridge type knob : easy to maintain, offers optimum adjustment quality and superior designing and engineering to provide high level of accuracy, with no significant affect from restrictions caused by down-stream equipments. The flow meters should be 0-15 LPM range for oxygen. etc complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Oxygen Adopter (Make:-Mediunited/Mellows/Unitrol)
114
-
-
... More
VACCUM SYSTEM
-
-
-
... More
Vaccum Gas Outlet Point
84
-
-
... More
SITC for Vacuum outlets as per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Vaccum Adopter .(Make:-Mediunited/Mellows/Unitrol)
84
-
-
... More
Ward Vaccum Regulator with 600ml jar(Make:-Mediunited/Mellows/Unitrol)
85
-
-
... More
Vaccum Pump Cap:-10 Hp , make :- Anest Iwata
2
-
-
... More
The vacuum Pumps 02 Nos having shall fully meets and complied with NHS Health Technical memorandum (HTM02-01)/. Vacuum System shall ensure the minimum pipeline vacuum level of 745mmHg is maintained at the plant service connection point at the rated volumetric ‘free air’ flow rate with two pumps in standby. Vacuum Pumps- CFM -152.6,Motor power -7.4 Kw (10 HP) Oil Lubricated Reciprocating vacuum pumps with filtration system.
-
-
-
... More
Vacuum Receiver’s- 1 x 1000Liters(01 No) capacity vertical vacuum receiver. Vacuum receiver(s) shall be supplied with relevant test certificates and have a total volume of at least 100% of the plant output in 1 minute in terms of free air aspired at normal working pressure.
1
-
-
... More
COMPRESSED AIR SYSTEM
-
-
-
... More
Air Gas Outlet Point (4 Bar)
34
-
-
... More
SITC for Compressed M.Air- 4 Bar outlets as Per standards , Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Air Adopter(4 Bar) (Make:-Mediunited/Mellows/Unitrol)
35
-
-
... More
Oil Free Air Compressor , Cap:- 15 Hp, 57 CFM . Make:- Anest Iwata,& Accessories
2
-
-
... More
• Two stage two cylinder single acting reciprocating type air-cooled air compressor • ASSC. 15 HP electric motor foot mounted with starter,
• Cfm.- 57
• To remove maximum contamination and minimum pressure drop.
-
-
-
... More
Air Reciver,Cap-500Ltr
The reviver assembly are be fitted with a pressure safety valve
1
-
-
... More
Desicant Air Dryer,Cap-60 CFM Dryer type-regenerative dessicant dryer,design pressure -13.2 bar g. Maximum air inlate temp.-65 degree C ,maximum pressure- 25 bar,pressure dew point -40 degree C
1
-
-
... More
Air Gas Outlet Point (7 Bar)
2
-
-
... More
SITC for Compressed S.Air- 7 Bar outlets as Per standards , Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Air Adopter(7 Bar) (Make:-Mediunited/Mellows/Unitrol)
2
-
-
... More
NITROUS OXIDE SYSTEM
-
-
-
... More
NITROUS Manifold 3+3 With Tail Pipe & Nrv
1
-
-
... More
SITC for (3working +3 Standby) size of N2O manifold complete with middle frame, chains, NRV's 6 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Manifold 2+2 Emergency With Regulator
1
-
-
... More
SITC for (2 working + 2 Standby) size of N2O manifold complete with middle frame, chains, NRV's 4 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Fully Automatic-Control Panel
1
-
-
... More
SITC for Fully Automatic pneumatically operated N2O control panel. With heater, The entire manifold will be hydraulically tested at 250 Kg/Cm2 pressure, duly degreased , etc complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Gas Outlet Point
2
-
-
... More
SITC for Nitrous Oxide outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
NITROUS Adopter (Make:-Mediunited/Mellows/Unitrol)
2
-
-
... More
Distribution Copper Pipe Lolldy certified EN: 13348,Make:-Janya/Mandev
-
-
-
... More
SITC for Medical Grade copper pipe with required copper fittings, All pipes shall be drawn half hard temp., solid drawn, seamless, phosphorous deoxidised, non-arsenic and degreased copper pipe conforming to EN BS: 13348:2008/ASTM B819 standard ,EN 1057:1996 (originally BS 2871-1971 Part 1 (Table X) and chemical composition as per BS-6017 of 1981 table 2, The supplies of copper pipe would be accompanied with manufacturers test certificate for the physical properties of copper pipes and their Chemical composition. The supply of pipes be further substantiated with inspection certificate from the third party like SGS/Lloyds Register. etc. complete as required.(MAKE:-Rajco Metals/Janya Extrusion/Mandev tube/Maxflow)
-
-
-
... More
Copper Pipe 12 MM x0.7 OD
700
-
-
... More
Copper Pipe 15 MM x 0.9 OD
700
-
-
... More
Copper Pipe 22 MM x 0.9 OD
1400
-
-
... More
Copper Pipe 28 MMx 0.9 OD
820
-
-
... More
Copper Pipe 42 MMx 1.2 OD
120
-
-
... More
Copper fittings for copper pipes (MAKE:-Rajco Metals/Janiya Extrusion/Mandev tube/Maxflow)
-
-
-
... More
Isolation Valve service (MAKE:-MATRIX)
-
-
-
... More
Isolation Ball Valve 12 MM
10
-
-
... More
Isolation Ball Valve 15 MM
10
-
-
... More
Isolation Ball Valve 22 MM
10
-
-
... More
Isolation Ball Valve 28 MM
10
-
-
... More
Isolation Ball Valve 42 MM
4
-
-
... More
Zonal Valve Service ( Valves with Box)
(Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Valve With Valve Box 2 Gas
4
-
-
... More
Valve With Valve Box 3 Gas
2
-
-
... More
Valve With Valve Box 5 Gas
2
-
-
... More
Area Alarm service (Make:-Mediunited/Mellows/ Unitrol)
-
-
-
... More
Area Alarm System 2 Gas
4
-
-
... More
Area Alarm System 3 Gas
2
-
-
... More
Area Alarm System 5 Gas
2
-
-
... More
Bed Head Panels (Size - 1000 X 300 X 110 mm) (Make:-Mediunited/Mellows/Unitrol)
-
-
-
... More
Pure extruded aluminium made with powder coat finish, Provision for 4 Nos gas outlets (2nos Oxygen,1 Nos Vaccum, 1 Nos Air) & 4 Nos of electrical switches & sockets ( 6/16 Amp)
10
-
-
... More
Kit conversion for Nitrous Oxide
2
-
-
... More
Kit conversion for Oxygen
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements