Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_76048_10Bid Award Id
ViewTender No
C.E. (B) - 37 / 2021-22Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
PARKING
762
-
-
DRAINAGE SYSTEM
225.6
-
-
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
-
-
-
BUILDING PROPER
767.57
-
-
ROAD
341.55
-
-
PARKING
251.46
-
-
DRAINAGE SYSTEM
74.45
-
-
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
BUILDING PROPER
1675.24
-
-
ROAD
207
-
-
PARKING
190.5
-
-
DRAINAGE SYSTEM
39.4
-
-
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
-
-
-
BUILDING PROPER
1471.72
-
-
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
61.95
-
-
DRAINAGE SYSTEM
39.4
-
-
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
166.2
-
-
ROAD
207
-
-
PARKING
190.5
-
-
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
BUILDING PROPER
115.84
-
-
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
307.21
-
-
First floor
318.52
-
-
Second Floor
351.84
-
-
Terrace Floor
97.97
-
-
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
50.23
-
-
First floor
36.92
-
-
Second Floor
41.2
-
-
Providing and fixing 100 mm thick Dry wall partitionwith impact resistance board upto ceiing height consisting of G.I frame and 2 X 12 mm thick tapered edge calcium silicate borad having density 900 kg / cum including providing and fixing of frame work made of special section power pressed / roll form of G.I sheetwith zinc coating of 120 gms / sqm ( both side inclusive) consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.55 mm thick , fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener or metal screws with nylon plugs and the studs 48 mm wide having one flanges of 48 mm and other falnges of 50 mm and 0.55 mm thick fixed vertically within flanges of floorand ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts including fixing of studs along 98 mm overall thuickness partition with 12 mm thick double skin calcium silicate board with calcereous & siliceous material reinforced with cellulose fibre manufactured through autoclaving process
-
-
-
BUILDING PROPER
-
-
-
Ground floor
445.42
-
-
First floor
521.83
-
-
Second Floor
360.63
-
-
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
BUILDING PROPER
-
-
-
Foundation
212.41
-
-
Pedestal
12.29
-
-
Column up to NGL
31.38
-
-
Plinth beam
75.2
-
-
ROAD
310.5
-
-
COLUMN
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
61.43
-
-
First Floor
46.21
-
-
Second Floor
45.56
-
-
Terrace Floor
15.53
-
-
LINTEL
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
18.57
-
-
First Floor
16.97
-
-
Second Floor
19.22
-
-
Terrace Floor
3.39
-
-
CHAJJA & FINS
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
43.61
-
-
First Floor
34.25
-
-
Second Floor
32.76
-
-
Terrace Floor
6.3
-
-
ROOF BEAM
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
71.65
-
-
First Floor
70.11
-
-
Second Floor
70.11
-
-
Terrace Floor
9.32
-
-
ROOF SLAB
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
240.47
-
-
First Floor
222.74
-
-
Second Floor
229.1
-
-
Terrace Floor
31.14
-
-
STAIRCASE
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
26.27
-
-
First Floor
26.27
-
-
Second Floor
26.27
-
-
ROAD
-
-
-
Kerb Stone
15.87
-
-
DRAINAGE SYSTEM
-
-
-
Base
39.4
-
-
Wall
52.56
-
-
Cover Slab
39.4
-
-
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
1112.24
-
-
First floor
585.28
-
-
Second floor
591.56
-
-
Terrace Floor
100.04
-
-
DRAINAGE SYSTEM
118.22
-
-
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
1019.79
-
-
First floor
1072.48
-
-
Second Floor
991.67
-
-
Terrace Floor
654.22
-
-
Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls punning and bitumen coating including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
DRAINAGE SYSTEM
788.4
-
-
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P and scaffolding required for the work etc. as directed by the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
5160.84
-
-
First floor
5077.89
-
-
Second Floor
4575.09
-
-
Terrace Floor
285.78
-
-
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
1211.29
-
-
First floor
1080.95
-
-
Second Floor
1361.91
-
-
Terrace Floor
207.62
-
-
Providing and fixing 20mm thick Granite stone in floor and Skirting (sample of sample of stone should be approved by EIC) for any similar locations where ever required in horizontal/vertical surfaces of above 0.40 Sqm size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-In-Charge. In all floors and all heights.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
532.12
-
-
First floor
500.74
-
-
Second Floor
500.74
-
-
Providing and laying Non slippery double charge Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of (JOHNSON/ VARMORA / OASIS/ KAJARIA/ SOMANY or equivalent) approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
588
-
-
First floor
735.51
-
-
Second Floor
551.13
-
-
Providing and laying Heavy duty Vitrified floor tiles 400x400 mm (thickness 10mm) 1st quality of (JOHNSON/ VARMORA / OASIS/ KAJARIA/ SOMANY or equivalent) approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
84.4
-
-
Providing and laying Heavy duty Vitrified tiles 10mm thickness, siz-300x300 mm (thickness to be specified by the manufacturer) 1st quality of (JOHNSON/ VARMORA / OASIS/ KAJARIA/ SOMANY or equivalent) approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
117.64
-
-
First floor
104.9
-
-
Providing , fitting & fixing of Platform jalsalmer & Tactile jalsalme flooring confirming to IS 4457:2007 of approed size 300mmx300mmx15mm with button profile=10mm+4.5mm, Tac liner profile = 10mm+4.5mm, low water absorption below below 0.5% of approved make (JOHNSON / VARMORA / OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
59.76
-
-
First floor
75.11
-
-
Providing and laying Corridor Non slippery full body homogeneous Vitrified floor tiles 16mm thickness, siz-600x600 mm 1st quality of (JOHNSON / VARMORA / OASIS / SOMANY/ KAJARIA or equivalent) approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
868.07
-
-
First floor
481.68
-
-
Second Floor
341.79
-
-
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
51.19
-
-
First Floor
30.29
-
-
Second Floor
74.93
-
-
Providing and installation of Primo SD anti bacterial PVC antistatic Flooring with 3mm cementious self-levelling flooring system with CL 11 as per specification of Ardex Endura. PVC flooring manufactured by Tarkett with a norminaql thickness of 2mm as per ISO 24340-EN 649. Primo SD shall have blinder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Sip Resistance of R9 as per DIN 51130, GREATER THAN 0.3 AS PER EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 as per N 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measered after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10 g/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Industrial as per EN ISO 10874.The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684. (Flooring for OT, ICU,)
-
-
-
BUILDING PROPER
-
-
-
Second Floor
168.17
-
-
LABORATORY-FLOORING
Providing and installation of Standard Plus anti bacterial PVC Flooring with 3mm cementious self-leveling flooring system with CL 11 as per specification of Ardex Endura. PVC flooring manufactured by Tarkett with a nominal thickness of 2mm as per ISO 24346 - EN 428. The nominal thickness of the wear layer shall be 2mm. The wear suface shall be PUR reinforced. Standard Plus shall conform to requirement of ISO 10581 - EN 649. It shall have blinder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and class Bfl-S1 as per EN 13501-1, Indentation of less than .04mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. Eclipse Premium shall have Class A as per ASTM F24 F51 for the clean room test. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10 g/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in commercial and Class 43 in industrial as per EN ISO 10874.The product is installed using welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
39.42
-
-
First Floor
14.22
-
-
Second Floor
14.22
-
-
LABORATORY-WALL
Supplying fitting & fixing of 10 mm thick & size of 600 x 600 mm (Preferably Somany, Johnson, Kajaria,VARMORA/ OASIS Make) Glazed Vetrified Tiles (GVT) of matt finish (WOODEN FINISH/RUSTIC FINISH) with veilcraft (VC) shield (Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib), in floor laid on 20mm thick cement motar (1.:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including all cost, labour, taxes, T&P, royality etc.all complete as per direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
93.58
-
-
First Floor
36.31
-
-
Second Floor
36.31
-
-
Providing, fixing, fitting of fully glazed door made out of Black powder coated aluminium frame using door section of 19501 of Jindal make with top, bottom and vertical member, Glazing clip no19352 and jointing angles and 10mm thk. toughened clear glass with itching as per drawing/design with all necessary hardware including long S.S handle to both side, including cost of materials, T&P, hire charges of drilling mechine, labour charges etc. complete as per direction of Engineer-In-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
80.4
-
-
First Floor
61.2
-
-
Second Floor
79.2
-
-
Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
1.92
-
-
First Floor
1.64
-
-
Second Floor
1.37
-
-
Providing, fitting and fixing of approved make 32mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. make of (green play & century ) with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
87.12
-
-
First Floor
74.52
-
-
Second Floor
61.92
-
-
Providing and Fixing pristine white uPVC doors & windows make: NCL VEKA LTD./ FENESTA / KOMMERLING. Company must have own production facilities (extrusion & fabrication) & control the entire cycle from Extrusion to Installation to Post Sales Service.
Providing and fixing of factory made uPVC Sliding window (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.6 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.2mm to 2.5mm.
-
-
-
UPVC Windows & Doors must be fabricated with fusion welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be of 6mm single clear Glass with weather seal (EPDM/TPE). There would be Warranty of 10 years on Profile & one year on hardware from the date of installation. UPVC windows & doors must be installed by profile manufacturer only.Only manufacturer Waranty is aceptable.
After placing 6 mm Green Reflective Toughned glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock( above 1500 mm Multi Lock ) and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm), complete in all respect as per direction of Engineer-In-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
94.2
-
-
First Floor
95.46
-
-
Second Floor
94.02
-
-
Terrace Floor
13.2
-
-
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
2826
-
-
First Floor
2863.8
-
-
Second Floor
2820.6
-
-
Terrace Floor
622.8
-
-
Priming one coat with water bound wall cement primer with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
7391.93
-
-
First Floor
7231.33
-
-
Second Floor
6928.67
-
-
Terrace Floor
1147.62
-
-
Painting two coats with approved antifungal weather seal paints (ISI) of approved colour, shade on wall surface (ISI) water bound including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
1019.79
-
-
First floor
1072.48
-
-
Second Floor
991.67
-
-
Terrace Floor
654.22
-
-
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
6372.14
-
-
First floor
6158.85
-
-
Second Floor
5937
-
-
Terrace Floor
493.4
-
-
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground floor
6372.14
-
-
First floor
6158.85
-
-
Second Floor
5937
-
-
Terrace Floor
493.4
-
-
Painting two coat with approved synthetic enamel paint to new iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
103.62
-
-
First Floor
105.01
-
-
Second Floor
103.42
-
-
Terrace Floor
29.64
-
-
ROAD
276
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
407.52
-
-
First Floor
434.25
-
-
Second Floor
434.25
-
-
Waterproofing Treatment :- Liftpit
Providing waterproofing for Liftpit :- Cleaning the inside surface & exposing the all construction joints (20 mm x 20 mm grooves) & honey combs, filling & sealing with Microcrete - 4 & cementitious pressure grouting of joints with expanding grout & polymer sika / perma Intreplast EP @ 0.5 kg + Sika Latex 0.5 kh/50 kg of cement. Providin & applying Sika Top seal 109 hi ( Two component Based acrylic polymer coating ) two coats followed by a protection plaster over a bond coat of sika Latex ( 1:4:6) & finish with net cement punning complete as per manufacture specification and direction of Engineer-In-Charge
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
91.89
-
-
G.R.C. JALI Providing and fixing glass reinforced concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 - 4 kg per sq.ft .and color of M/S Unistone make or equivalent. The above weight and having at least 50% void space. The screens should be made from 53 grade white portlsnd cement manufactured by N.E.G JAPAN or equivalent, super plasticizers manufactured by BASF or equivalent, polymers manufactured by BASF or equivalent and U.V resistant synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) or equivalent. The matrial casting should take place in frp molds. The fixing of screens should be Dry fixing i.e. to be done with M.S Galvanized clamps, fixtures and fasteners of Hilti/fischer.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
50.99
-
-
First floor
53.62
-
-
Second Floor
49.58
-
-
MCM SLATE STONE CLADDING.
Supply of MCM modified clay material - MCM slate stone -575x286 mm & 1150x575 of PHOMI make as per cpmpany standard dimension pattern colour as specified manufactured through unfired patented (Ref: US PATENT 8505840 B2 & European patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K- EN 12667 (2001), thermal resistance 0.0568 m2 K/W- EN 12667 (2001) and fire insulation - class A- ASTM E84-15.
The product should be patented from united states and europe and with certifications by IGBC, singapore green label and china green building material .MCM matrials should be fixed with suitable cement / polymer /epoxy based adhesive as per adhesive chart and aubstrate and per direction of engineer in-charge .Grouting should be done using filling and pointing method as per installation drawing provided ,and color of the grout should be as per the architects specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
50.99
-
-
First floor
53.62
-
-
Second Floor
49.58
-
-
MCM BRICK CLADDING.
Supply of MCM Modified Clay Material ‐ MCM A Series Brick ‐ 240 x 60 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
50.99
-
-
First Floor
53.62
-
-
Second Floor
49.58
-
-
Structural Glazing.
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5mm reflective with all taxes complete.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
191.33
-
-
Providing and fixing Aluminium anti micro bacterial Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/ sqm (both side inclusive), fixing with clip in tiles into spring T with : 12.54.1 Aluminium anti micro bacterial Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
-
-
-
BUILDING PROPER
-
-
-
Second Floor
168.17
-
-
Providing and fixing false ceiling at all height with integral densified ICD bioguard calcium silicate reinforced with fiber and natural filler with bioguard coating false ceiling size 595x595 mm, of approved texture design and pattern having acoustical NRC 0.50 as per IAS8225.1987, Light Reflection 85% minimum non-combustible as per BS:476 (part 4), fire performance as per BS: 476 (part 6&7), humidity resistant of 100% thermal conductivity /0.043W/MK as per ASTMS 18:1991 in true horizontal lever suspended on inter locking metal T grade of hot dipped galvanized iron section 0.33mm thick galvanized @120gm per sq.m. including both side comprising of main tee runner size 24x38mm of the 3.00mtr, crosstee of size 24x32x1.200 and other crosstee 0.600mtr, making structure for the ceiling part.
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
561.04
-
-
First floor
493.21
-
-
Second Floor
458.1
-
-
GYP BOARD CEILLING.
Providing and fixing False ceiling as per Saint Gobain Specifications made of standard G.I. Sections and 12mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, complete with putty, primer and painting of approved make and colour. Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge. (Basic Rate of Gypsum Board 12mm thk. Rs.303/ sheet).
-
-
-
BUILDING PROPER
-
-
-
Ground Floor
561.04
-
-
First floor
493.21
-
-
Second Floor
458.1
-
-
WALLGARD FOR OT & ICU.
Providing and installation of Homogenous Vinyl Sheet for wall with a total thickness of 1.3 mm as per ISO 24346 - EN 428, width of 2m as per ISO 24341 - EN 426, weight of 2.100 g/m2 as per EN ISO 23997.. The wear surface shall be PUR reinforced. It shall conform to requirement of wetroom as per GBR class VT. It shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. he product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
-
-
-
BUILDING PROPER
-
-
-
Second Floor
286.31
-
-
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
BUILDING PROPER
-
-
-
Terrace floor
1656
-
-
Waterproofing Treatment :- Providing test first to be done , application of nerolac perma guard 2k in 2coats over the roof slab & continue over the parapet wall reinforced covering with 1:4 cm admixed with nerolac perma plast-o-proof STD @ 100gm per 50kg cement over the joint to terrace to parapet over bond coat perma latex SBR (1:4:6) followed by a the protection screed (1:1.5:3) in panel of size 2mtrx2mtr to drain the water towards the rain water pipe & finally filled the grooves 8mm x10mm with nerolac perma polyseal (poly sulphide sealant ) complete as per manufacture specification & direction of engineer incharge
-
-
-
BUILDING PROPER
-
-
-
Terrace floor
1656
-
-
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
ROAD
207
-
-
PARKING
190.5
-
-
Providing, fixing &fitting of 80mm thick cement concrete interlocking paver block of M-30 grade and approved make,variety,colour & size made by block making machine with strong vibratory compaction of approved design and shape,laid in required colour and pattern over 50mm thick compacted bed of coarese sand, filling the joints with fine sand etc.including cost, conveyance, royality of all matrials,labour T&P etc.complete in all respect as per direction of the engineer-in-charge
-
-
-
PARKING
1270
-
-
E.I. WORK
INTERNAL WIRING.
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider opale/Eq) With 10Years Warenty
-
-
-
Group C
380
-
-
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr
50
-
-
Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group B
122
-
-
Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
10
-
-
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.
160
-
-
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
30
-
-
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.
140
-
-
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For Aquaguard.
70
-
-
Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.
50
-
-
Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group B
65
-
-
Call bell point
20
-
-
Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.
10
-
-
SUBMAIN.
-
-
-
Recessed wiring to submain in 4 x 16 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
240
-
-
Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
100
-
-
Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
240
-
-
Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
1400
-
-
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
1700
-
-
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping)
750
-
-
DB.
-
-
-
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 5Years Warenty)
-
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-10/20A SP MCB 10KA-12Nos.(Make-L&T/ Schneider/Legrand/Eq)
12
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 12 way SPN Distribution Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A DP MCB (10KA) Outgoings-10A SP MCB 10KA-10Nos.(Make-L&T/ Schneider/Legrand/Eq)
12
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For FLDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-40A DP MCB 10KA-6Nos.(Make-L&T/ Schneider/Legrand/Eq)
3
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way VTPN Distribution Boards For FPDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-125A FP MCCB (25KA) Outgoings-63A TP MCB 10KA-4Nos.(Make-L&T/ Schneider/Legrand/Eq)
3
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way SPN Distribution Boards For UPS DB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A DP MCB (10KA) Outgoings-10A SP MCB 10KA-6Nos.(Make-L&T/ Schneider/Legrand/eq)
3
-
-
CABLE .
-
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 240 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
75
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 150 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
50
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 95 3.5core sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
50
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 50 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
100
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 35 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
100
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable/Eq)
200
-
-
END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
3.5C x 240 sq.mm
2
-
-
3.5C x 150 sq.mm
2
-
-
3.5C x 95 sq.mm
2
-
-
3.5C x 50 sq.mm
8
-
-
3.5C x 35 sq.mm
8
-
-
4C x 16 sq.mm
12
-
-
PANEL
-
-
-
Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/SIEMENS/Eq.
-
-
-
MAIN PANEL with 400A 4P Change Over switch & 400A 4P MCCB 50KA -1 No as incomer, 200A 4P MCCB 36KA 2Nos,125A 4P MCCB 25KA 5Nos,200A 4P Change over Switch 1Nos 63A 4P MCB 10KA.-12Nos with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB.
1
-
-
LIFT DB with 63A 4P MCB (10KA) -1 No as incomer ,40A 4P RCCB 100MA -1Nos, 10A SP MCB 10KA-6 Nos as Outgoing with E.C Busbars .
4
-
-
EXT Light DB with 63A 4P MCB (10KA) -1 No as incomer, 1Nos Timer Switch ,20A SP MCB 10KA-18 Nos as Outgoing with E.C Busbars .
1
-
-
PUMP Panel Board with 63A 4P MCB (10KA) as Incomer , Outgoings-32A 4P MAB 10KA-2Nos, 20 A DP MCB 10KA-3Nos, with E.C Busbars.
1
-
-
EARTHING
-
-
-
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
8
-
-
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
100
-
-
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
100
-
-
Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.
250
-
-
Lightning Arrester.
-
-
-
Supply & fixing of lightning arrester of size 2.6' length made of 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods of 0.3" diameter with suitable size of nuts and bolts.
12
-
-
Supply & fixing of GI flat of 25mmx5mm size.
300
-
-
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
6
-
-
FIXTURE
-
-
-
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-Bajaj/philips/wipro/JAQUAR/halonix/k lite/Eq.makeWith 5Years Warenty.
-
-
-
Ceiling mounted indoor type batten type LED Luminaire with LED Lamp.
150
-
-
Ceiling/ Wall mounted type BULK HEAD Luminaire .
15
-
-
Supply, Installation, testing and commissioning of 10W Mirror Light .
30
-
-
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
122
-
-
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
44
-
-
Supply & fixing of 12W LED Down Light (S) With all accessories.
60
-
-
Supply & fixing of LED 36w 2'x2' Surface Mounted Light .
150
-
-
Supply, Installation, testing and commissioning of 18W Bulb with Angle holder.
20
-
-
Supply & fixing of 5W LED Wall Decorative LIGHT With all accessories.
10
-
-
Supply, Installation, testing and commissioning of wall fan of 400 mm sweep as required.
25
-
-
Supply & fixing of LED Bollards light (8/10 watt) with all accessories.
20
-
-
Supply & fixing of LED Gate Light (25 Watt) with all accessories.
4
-
-
Supply & fixing of LED POST TOP light(60Watt), with hot dipped galvanized Pole(3.5mtr) with design, with concrete foundation etc.
6
-
-
Perforated type cable tray
-
-
-
Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays
-
-
-
Size of Cable Tray :300 mm x 50 mm
200
-
-
Size of Cable Tray :150 mm x 50 mm
250
-
-
TV /TEL & DATA
-
-
-
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
32
-
-
Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
20
-
-
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
650
-
-
Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.
400
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20mm
200
-
-
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
3
-
-
Supplying & Commissioning of Telephone Hand Set.
32
-
-
Supplying & installation of 10 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.
3
-
-
250-KVA Silent D.G. SET
-
-
-
Supply & delivery of 250-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 400-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) With AMF Panel type with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge. Cumins/Kirloskar/Eq make
1
-
-
Installation, testing and commissioning of 250-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 400-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge.
1
-
-
DG Set Foundation including barbared wire fencing / Roof shade as required.
1
-
-
TP Meter Box of 250 KVA DG set
-
-
-
1 No 3 phase 4 wire 5amp CT operated digital KWH meter in tamper proof enclosure with locking and sealing arrangement along with suitable bus bar arrangement,for mounting of C.T's & 400/5-A CTs, cable termination arrangement complete as required
1
-
-
SAFETY EQUIPMENTS
-
-
-
Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
4
-
-
Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.
4
-
-
Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .
4
-
-
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
3
-
-
Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.
1
-
-
HVAC SYSTEM
-
-
-
Supply of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type
Scroll /twin rotary Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. with refrigerant-cooled PCB for better performance complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.
The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc.VRV/VRF Outdoor make should be same having compressor motor of 6 pole. The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency.The Unit should have free phase technology so that unit can work in case of
phase reversal also without tripping of units. Makes : Mitsubishi Electric, Daikin, O General, Carrier, Toshiba,Eq make
-
-
-
10 HP
7
-
-
16 HP
4
-
-
20 HP
2
-
-
Outdoor Connecting Kit
5
-
-
Supply of Indoor Units with Wireless Remote
-
-
-
Supply of following minimu capacity 4-way/ round flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with cordless remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation,
necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm
adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. All 4 louvers of the unit shall be independently adjustable for positiion as per user preference.
The cassettes units shall have dual sensor which detect the presence of people and floor temperature to provide comfortable air-conditioning and energy saving. The sensor should detects human presence and adjust the airflow direction automatically to prevent drafts. Room
temperature should increase upto 4 deg C or the indoor to be switched off when no people are detected or as per user preference. The sensor should detects the floor temperature and automatically adjusts the operation of the indoor unit to reduce the temperature difference
between the ceiling and the floor. The unit shall be fitted with PM 2.5 Filter.
-
-
-
1.65 TR ( With Dual Sensor & PM 2.5 Filter )
3
-
-
2.06 TR ( With Dual Sensor & PM 2.5 Filter )
7
-
-
2.56 TR( With Dual Sensor & PM 2.5 Filter )
5
-
-
3.3 TR( With Dual Sensor & PM 2.5 Filter )
6
-
-
4.12 TR( With Dual Sensor & PM 2.5 Filter )
8
-
-
Supply of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable synthetic media pre- filter, fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operationon 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
-
-
-
0.8 TR
3
-
-
1.32 TR
2
-
-
1.65 TR
2
-
-
2.06 TR
5
-
-
Supply of following minimum capacity VRV/VRF Treated Fresh Air type Indoor unit equipped with washable synthetic media pre- filter & PM2.5 Filter, fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operationon 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
-
-
-
1200 CFM
6
-
-
PART - B
-
-
-
Installation, testing and commissioning of VRV/VRF equipments complete with all accessories, nitrogen flushing and one-time gas charging
-
-
-
ODU Details-
ITC of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type
Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. with refrigerant-cooled PCB for better performance complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.
-
-
-
The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc.The OEM should be the manufacturer of its own compressor ie the compressor and VRV/VRF Outdoor make should be same having compressor motor of 6 pole. The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency.The Unit should have free phase technology so that unit can work in case of
phase reversal also without tripping of units. Makes : Mitsubishi Electric, Daikin, O General
-
-
-
10 HP
7
-
-
16 HP
4
-
-
20 HP
2
-
-
IDU Details-
ITC of following minimu capacity 4-way/ round flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with cordless remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation,
necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. All 4 louvers of the unit shall be independently adjustable for positiion as per user preference.
-
-
-
The cassettes units shall have dual sensor which detect the presence of people and floor temperature to provide comfortable air-conditioning and energy saving. The sensor should detects human presence and adjust the airflow direction automatically to prevent drafts. Room temperature should increase upto 4 deg C or the indoor to be switched off when no people are detected or as per user preference. The sensor should detects the floor temperature and automatically adjusts the operation of the indoor unit to reduce the temperature difference between the ceiling and the floor. The unit shall be fitted with PM 2.5 Filter.
-
-
-
Cassette Unit
-
-
-
1.65 TR
3
-
-
2.06 TR
7
-
-
2.56 TR
5
-
-
3.3 TR
6
-
-
4.12 TR
8
-
-
ITC of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable synthetic media pre- filter, fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operationon 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
-
-
-
Hi Wall Unit
-
-
-
0.8 TR
3
-
-
1.32 TR
2
-
-
1.65 TR
2
-
-
2.06 TR
5
-
-
ITC of following minimum capacity VRV/VRF Treated Fresh Air type Indoor unit equipped with washable synthetic media pre- filter & PM2.5 Filter, fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operationon 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree CWB temperature.
-
-
-
1200 CFM
6
-
-
Design SITC of the Cu. refrigerant pipes with 19mm/13mm with nitrile rubber tube insulation of following sizes (Make: Rajco, Mandev, Maxflo) with insulation (Make: Aeroflex, K-flex, Armacell)
-
-
-
Gas line with 19mm thick insulation
-
-
-
41.3mm
10
-
-
34.9mm
25.85
-
-
28.58mm
9.12
-
-
22.2mm
55.96
-
-
19.05mm
9.12
-
-
15.88mm
153.59
-
-
12.7mm
50.18
-
-
Liquid line with 13mm thick insulation
-
-
-
19.05mm
14
-
-
15.88mm
21.9
-
-
12.7mm
12.17
-
-
9.52mm
215.63
-
-
6.35mm
49.27
-
-
Design, supply, fabrication & erection of air distribution GSS Ducting in accordance with the approved ducting lay out drawing, complete with all accessories, dampers, guide vanes, support, etc. (Jindal, Tata, SAIL)
-
-
-
24 G GP Sheet
140
-
-
22 G GP Sheet
60
-
-
Design SITC of Providing thermal insulation over the ducts with 13mm thick Aluminium foil faced nitrile foam insulation. (Make: Armacell, K-flex, Aeroflex)
200
-
-
Design SITC of Providing acoustic insultion 12 mm thick acco sound insulation insite the ducts (Make: Armacell, K-flex, Aeroflex)
60
-
-
Design SITC of approved make linear grills finished with power coated (Make: Dynacraft, Systemair, Caryaire)
10
-
-
Design SITC of approved make VCD
5
-
-
Control & Transmission Wiring
-
-
-
Supply Installation Testing and Commission of Control wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units (Make: Finolex, Polycab, Havells)
220
-
-
Supply Installation Testing and Commission of PVC drain pipe with 6mm thick nitrile tube insulation. ( Supreme, Finolex, Prince)
-
-
-
32mm
30
-
-
40mm
110
-
-
25mm
20
-
-
Design SITC of GI Slotted Tray for expose copper piping covered with GI sheet(22G) on terrace & in shaft if open.
-
-
-
50mmx150mm X 50mm
105
-
-
50mmx300mm X 50mm
20
-
-
Design Sitc of VRV/VRF systems including topping R410A gas as per site requirements (Make: Dupont, Honeywell, Chillaire)
150
-
-
VI pads for ODU base
1
-
-
Canvas connection for TFA units
6
-
-
FIRE FIGHTING SYSTEM
-
-
-
FIRE PUMP ROOM EQUIPMENT:Kirloskar/Wilo/Eq make
-
-
-
supply insatallation testing commisoning of electrical motor driven main pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 1620 LPM head 70 mtr .The pump shall be coupled to TEFC motor of suitable HP with speed of 2900 RPM and complete set shall mounted on common base frame.
1
-
-
supply insatallation testing commisoning of diesel Engine driven common stand by pump, horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 1620 LPM at 56MWC. The pump shall coupled to suitable HP of Diesel engine radiator water cooled type with speed of 1800RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, Fuel tank with stand , Fuel piping with valves.
1
-
-
supply insatallation testing commisoning of electrical motor driven Jockey pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 180LPM at 56 MWC.The pump shall be coupled to TEFC motor of suitableHPwith speed of 2900RPM and complete set shall mounted on common base frame.
2
-
-
Control Panel for Fire pumps.Simens/L&T/Legrand/Eq make
-
-
-
Fabricating & Supply, installing, testing and commissioning of compartmentalized common control panel for Electrical motor driven pumps and Diesel engine driven pumps.
INCOMING 1 nos. 200A TPN MCCB (50 KA) 1 Sets of 200 Amps. TPN Al. Bus bars with color coded heat shrinkable PVC sleeves.
2 Set of RYB indicating lamps with individual HRC control fuses.
1 No. 96 Sq.mm 0-800 Amps. Ammeter with selector switch and suitable rated current transformers.
1 No. 0-800 96 Sq.mm Voltmeter with selector switch.
OUTGOING
Feeder for main pumps - 1 Nos.
1 Nos.125A TP MCCB Star delta starter with over load relay, single phase preventer and indicating lamps with ON / OFF push buttons.
Feeder for Jockey pump - 1No.
1No. 32A TP MCB.
DOL starter with over load relay, single phase preventer and indicating lamps with ON / OFF push buttons.
2No. Auto manual selector switch
1
-
-
DIESEL ENGINE MAIN PUMP 1 No.
a) 20Amps DPMCB -1Nos.
b) Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 2 Nos.
c) 1 set of indicating lamps for the following :
1. phase indication
2. battery charger on
3. over load relay
4. DC supply on
5. control switch on
6. Engine fails to start
7. Pump on
8. Low oil pressure
9. High water temperature
10. Auto manual selector switch
d) 1 sets of push button stations for the following :
1. Engine Start
2. Engine Stop
3. Engine - hooter ACK
4. Engine - fault reset
-
-
-
e) Selector switches (Engine control, mode selector)-1 No.
f) Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set.
g) Hooter for audio alarm (Industrial type) - 1 No.
All the components shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffeners ( if required). The panel shall be powder coated of approved color both inside & out side.
-
-
-
1100 V GRADE POWER / CONTROL CABLES
-
-
-
Supplying, laying, testing & commissioning of FRLS,PVC outer sheateh, steel armored, aluminum , 1100v grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth. The rate shall excludes tray & Hume pipes. The minimum size of the cables shall as mentioned below,
-
-
-
3.5C x 35 sq.mm for main pumps
40
-
-
4 C x 16 Sqmm. Jockey pumps
20
-
-
12 C x 2.5 Sqmm.Diesel engines
20
-
-
2 C x 1.5 Sqmm.for Instrumentation
50
-
-
G.I. Earthling strips of 50mm x 6mm thick, strip shall be run on floor for PUMPS (From Pumps to the nearest Erath pit shall be executed by Client).
41
-
-
Reparing,service,Re installing, testing and commissioning of waffer type C.I. Non-return valves as per IS:5312 with required flanges, nuts, bolts and gaskets etc. complete.L&T/Zoloto/Eq make
-
-
-
200mm nominal dia
1
-
-
150 mm nominal dia
4
-
-
100 mm nominal dia
1
-
-
80 mm nominal dia
1
-
-
Reparing ,service, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.L&T/Zoloto/Eq make
-
-
-
150mm nominal dia
6
-
-
100mm nominal dia
2
-
-
80mm nominal dia
1
-
-
50mm nominal dia
1
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.
-
-
-
15mm dia.
12
-
-
25 mm dia
6
-
-
Supplying, installing, testing and commissioning of Pressure switches of suitable range for pumpsets .
6
-
-
Supplying, installing, testing and commissioning of Pressure gauges of suitable range for pumpsets .
7
-
-
Exhuast pipe for Diesel engine80mm dia M.S. heavy grade shall be laid above ground with structuralsteel supports.
20
-
-
EXTRANAL WITH INTERNAL HYDRANT
-
-
-
Supply,installation ,testing commissioning of MS mudium grade Class pipe as per IS1239 : The pipes complete withas Rate quoted shall include for painting of pipe with a coat of primer and two coats of synthetic enamel paint of approved colour / make for aboveground piping and local fire service department requirement complete including supply and installation of pipe supports, fasteners etc.Make-jindal/Tata
-
-
-
100 mm dia
150
-
-
80 mm dia
12
-
-
25 mm dia
24
-
-
Supplying, installing, testing and commissioning Single headed hydrant valve as per IS 5290, made of ss type with 63 mm dia instantaneous out & 80 mm dia fanged inelt inlet,Blank cap , chain and hand wheel etc complete.Make. Omex/Newage/Minimax
10
-
-
Supplying, installing, testing and commissioning 15 M long, 63mm dia RRL hose with instataneuos ss couplings and Hoses shall beas per IS 636 TYPE A TAC/ LFA of 15 mtr.Make. Omex/Newage/Minimax
20
-
-
Supplying, installation , testing and commissioning1 no. ss short branch pipe with nozzle.conforming to IS : 903, suitable for instantaneousMake. Omex/Newage/Minimax
10
-
-
Supplying, installing, testing and commissioning Hose cabinet stand moulded type fabricated out of 18swg sheet of ms. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet includes suitable all fasteners etc, and cabinet shall be powder coated of approved colour both inside and out side. Make. Omex/Newage/Minimax
10
-
-
Supplying, installing, testing and commissioningHose reel drum of swinging type with 19mm dia Rubber braided hose of 30M. length with Gate valve and plastic nozzle, complete.Make. Omex/Newage/Minimax
6
-
-
SPRINKLER SYSTEM
-
-
-
Supply,installation ,testing commissioning of MS mudium grade Class pipe as per IS1239 : The pipes complete withas Rate quoted shall include for painting of pipe with a coat of primer and two coats of synthetic enamel paint of approved colour / make for aboveground piping and local fire service department requirement complete including supply and installation of pipe supports, fasteners etc.Make-jindal/tata/eq make
-
-
-
150 mm dia
85
-
-
100 mm dia
18
-
-
80 mm dia
23
-
-
65mmdia
16
-
-
50mm dia
20
-
-
32mm dia
35
-
-
40mm dia
24
-
-
25 mm dia
145
-
-
supply ,installation,commisoning of 60degre sprinkler with fittings
89
-
-
Supply,installation ,testing commissioning of4way fire brigradeinlet coats of synthetic enamel paint of approved colour / make Zoloto/Eq make
1
-
-
Supply,installation ,testing commissioning 150 mm alarm valve with gung and fitting coats of synthetic enamel paint of approved colour,including 150mm butterfly with all fitting etc.
1
-
-
Supply,installation ,testing commissioning 200 mm Air vasel with relese valve and pressur guge and fitting coats of synthetic enamel paint of approved colour etc.
1
-
-
FIRE ALARM SYSTEM:Honeywell/Siemens/Eq make
-
-
-
Supplying, installing, testing and commissioning of Intelligent Addressable Fire Alarm Control panel shall be with switch mode power supply, battery back up and charger The panel shall have 2 loops as capacity with the option of using with 396 devices per loop in any combination. The panel shall consisting with 160 character LCD display, Touch keys. Shall be networkable by RS 485 or TCP/IP , repeater/Mimic connectivity. USB - 2.0 for PC Interface.Degraded redundancy operating mode when the main CPU fails. UL Listed
1
-
-
Supplying, installing, testing and commissioning of Conventional type Horn / Strobe wall mounted type rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication
6
-
-
ReparingAddressable Manual call point
6
-
-
Supplying, installing, testing and commissioning of Addressable Intelligent Photoelectric Smoke Detector for above & below false ceiling.
60
-
-
Providing, fixing, testing & commissioning of Addressable Intelligent Photoelectricwith base for above & below false ceiling.
3
-
-
Providing, fixing, testing & commissioning of Fault isolator Module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected
4
-
-
Providing, fixing, testing & commissioning Cabling 2x1.5 sqmm copper Armored cable & end terminations etc. For Fire alarm system.
541
-
-
PORTABLE FIRE EXTINGUISHERS:Supremax/Fireshield/Eq make
-
-
-
Supplying, installing, testing and commissioning of following Portable Fire Extinguishe with ISI Mark. The quoted rate shall be inclusive the cost of all materials, labours, HOM of machinery & equipments, with all leads and lifts, loading and unloading, transportation, , all other incidental charges as per specifications etc., complete and as directed by the Engineer incharge.
-
-
-
ABC Type Extinguisher
-
-
-
Capacity - 6kg capacity
-
-
-
Water-Stored Pressure Type Fire Extinguisher
30
-
-
Capacity - 9 Litres
2
-
-
CO2 type Extinguisher
-
-
-
Capacity - 4.5 kg
6
-
-
SIGNAGES
-
-
-
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
24
-
-
PA SYSTEM
-
-
-
(C) EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM Supplying, installing, testing and commissioning of 10 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Honeywell/Bosch/Ahuja/Ecler
9
-
-
Supplying, installing, testing and commissioning solid state Amplifier of 250 W RMS out put in rack, including necessary control wires, jocks etc. complete.Honeywell/Bosch/Ahuja/Ecler
1
-
-
Supplying, installing, testing and commissioning of P.A. Console 8 zone shall expandable up to 60 zones , with priority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone etc.Honeywell/Bosch/Ahuja/Ecler
1
-
-
Supplying, installing, testing and commissioning ofwith priority module micro processor based & goose neck micro phone etc shall be located in the reception / security for the announcement necessary communication cable/CAT 6 shall be considered from PA controller to call station .Honeywell/Bosch/Ahuja/Ecler
1
-
-
Supplying, installing, testing and commissioning of "Rack 650mm depth, 9U high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coated of approved color and spare 'U' shall be covered with blank panels.Honeywell/Bosch/Ahuja/Ecler
1
-
-
Supplying, installing, testing and commissioning of 2 runs of 40 strand and each of 0.2 mm thick, Twisted Pair PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes of Acrylic Fire stop Sealant in the opening for cables passing through fire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating. Polycab/kei/finolex/havells
100
-
-
Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. 20mm dia.
124
-
-
LIFT.
-
-
-
Providing & Fixing of 1no. 1020 Kgs (15 person), Bed-cum-Passenger lift, gearless & machine room less ,elevator having automatic rescue operation with 3 stop, full collective operation with/without attendant, made of stainless steel car panel with rear side of the lift having glass panel with SS handrails and 800mm width stainless steel door (opening on one side in all stop), Anti skid flooring, All hand rail black rubber coated, complete in all respect as directed by Architect/Engineer-In-Charge. The rate includes all complete with materials, labour, T&P, taxes etc. Make SCHINDLER OTIS & THYSENKRUP or equevalents approved as per Technical & Manufacture's specification. NBC 2016 to be followed for specifications.
4
-
-
P.H. WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground floor
-
-
-
20 mm CPVC sch-80 pipes (Oriplast/Supreme)
115
-
-
25 mm CPVC sch-80 pipes (Oriplast/Supreme)
110
-
-
32 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
40 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
50 mm PVC sch-80 pipes (Oriplast/Supreme)
100
-
-
First floor
-
-
-
20 mm CPVC sch-80 pipes (Oriplast/Supreme)
115
-
-
25 mm CPVC sch-80 pipes (Oriplast/Supreme)
110
-
-
32 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
40 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
Second floor
-
-
-
20 mm CPVC sch-80 pipes (Oriplast/Supreme)
115
-
-
25 mm CPVC sch-80 pipes (Oriplast/Supreme)
110
-
-
32 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
40 mm PVC sch-80 pipes (Oriplast/Supreme)
90
-
-
Third floor
-
-
-
50 mm CPVC sch-80 pipes (Oriplast/Supreme)
115
-
-
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge.
-
-
-
Ground Floor :- 250 mm thick wall
20
-
-
First Floor :- 250 mm thick wall
20
-
-
Second Floor :- 250 mm thick wall
20
-
-
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge.
-
-
-
Ground Floor :- 250 mm thick wall
18
-
-
First Floor :- 250 mm thick wall
18
-
-
Second Floor :- 250 mm thick wall
18
-
-
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
-
-
-
Ground Floor
225
-
-
First Floor
225
-
-
Second Floor
225
-
-
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.
-
-
-
Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Jaquar CON-041KN.
-
-
-
Ground Floor
9
-
-
First Floor
7
-
-
Second Floor
5
-
-
Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib Cock Jaquar-CON-107KN.
-
-
-
Ground Floor
8
-
-
First Floor
1
-
-
Second Floor
2
-
-
Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock Jaquar-CON-047KN.
-
-
-
Ground Floor
5
-
-
First Floor
3
-
-
Second Floor
1
-
-
Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar CON-059KN.
-
-
-
Ground Floor
40
-
-
First Floor
28
-
-
Second Floor
21
-
-
Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock Jaquar Continental Cat. No.- CON -011KN.
-
-
-
Ground Floor
22
-
-
First Floor
12
-
-
Second Floor
16
-
-
Fixing of 25mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)
30
-
-
Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)
12
-
-
Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve(shakti make)
10
-
-
Fixing of 50mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve(shakti make)
6
-
-
15mm dia PVC connection pipe 450 mm long
35
-
-
15mm dia CP Extention Nipple
130
-
-
Providing and fixing circular type stainless CP jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge.
-
-
-
Ground Floor
30
-
-
First Floor
20
-
-
Second Floor
12
-
-
Supplying all materials, labour, T&P and fixing 100 mm dia wall mounted over head shower & Shower arm Hindware/Jaquar/Parryware including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge. 100 mm dia CP overhead shower with Arm (Jaquar -OHS-1989, Jaquar SHA 483)
-
-
-
Ground Floor
8
-
-
Second Floor
2
-
-
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Concealed Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. Concealed stop cock Jaquar CON-083FTK.
-
-
-
Ground Floor
8
-
-
Second Floor
2
-
-
Supplying all materials, labour, T&P and fixing Hand showers of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.Wall Mixer Jaquar- HSH-WHM-1715 (PAGE NO -120).
-
-
-
Ground Floor
2
-
-
Second Floor
2
-
-
Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge.
-
-
-
15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia Jaquar ALD-577.
-
-
-
Ground Floor
9
-
-
First Floor
7
-
-
Second Floor
5
-
-
Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
2000 litre capacity water storage tanks in the roof of 2ND floor.
10
-
-
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.
-
-
-
110mm diameter U-PVC SWR pipes(Oriplast type-B/Supreme)
500
-
-
110mm U-PVC door Tee
60
-
-
110mm U-PVC offset
120
-
-
110mm U-PVC door bend
30
-
-
110mm U-PVC plain shoe bend
60
-
-
110mm U-PVC vent cowl
20
-
-
110mm P-trap
60
-
-
110mm U-PVC plain bend
30
-
-
75mm diameter U-PVC SWR pipes(Oriplast type-B/Supreme)
100
-
-
75mm U-PVC plain bend
10
-
-
75mm U-PVC door bend
10
-
-
Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge.
-
-
-
250mm to 375mm thick wall
70
-
-
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge.
-
-
-
10 Liters capacity PVC cistern with 32mm dia flush bend. Hindware sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm
-
-
-
Ground Floor
11
-
-
First Floor
10
-
-
Second Floor
6
-
-
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) of Hindware/Jaquar/Parryware duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
Hindware Orissa Pan cat no 20004 Starwhite. Size- 53x41 cm
-
-
-
Ground Floor
5
-
-
First Floor
3
-
-
Second Floor
1
-
-
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
One piece closet- Hindware Cat No-92509 (S-10) Starwhite type, size-57x35x39 cm, seat cover for Hindware seat cover Premium starwhite.
9
-
-
Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
Under counter basin(Hindware)No.10095
31
-
-
Wash hand basin with porcelain pedestal
6
-
-
Half pedestal basin(Hindware)No.90149+91115
9
-
-
Supplying all materials, labour, T&P and fixing Flat back large pattern urinal of Hindware/Jaquar/Parryware the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Hindware Flat back large urinal cat no-60002 starwhite, Size-37.5x39x59 cm.
-
-
-
Ground Floor
6
-
-
First Floor
5
-
-
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge.
-
-
-
750mmx600mm size B.E.mirror (Alpina/Golden fish/Belgion)
6
-
-
Design Mirror
9
-
-
Big size Mirror-31x0.60x0.75=
13.95
-
-
Supplying all materials, labour, T&P and fixing standard size glass-shelf of Hindware/Jaquar/Parryware with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge.
-
-
-
Jaquar glass shelf ACN-1171 N 600mm long
15
-
-
Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24" of Hindware/Jaquar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge
-
-
-
25mmx600mm long CP towel rail (Jaguar make) ACN-1111NM.
-
-
-
Ground Floor
8
-
-
Second Floor
2
-
-
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel ring complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge(Jaquar)ACN-SSF-1121
-
-
-
Ground Floor
22
-
-
First Floor
12
-
-
Second Floor
12
-
-
Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case of Hindware/Jaquar/Parryware complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder (Jaguar make) ACN-1131N.
15
-
-
Supplying all materials, labour, T&P and fixing standard sized Robe Hook of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Jaquar Robe hook AKP-ACR-35791PMI
-
-
-
Ground Floor
11
-
-
First Floor
10
-
-
Second Floor
6
-
-
Supplying all materials, labour, T&P and fixing standard sized Soap Dispensor of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Soap dispense with Glass Bottle. ACN-1135N.
15
-
-
Supplying & fixing of Matrix Set-1 Mat code-70002,EWC : (P-18) (WB 46X36 with one pair mounting brackets, EWC & cistern complete with fittings & seat cover, one no hinged rail 76 cm and 4 nos of grab rail 60cm complete with all as per specification & direction of the Engineer in charge.
-
-
-
Ground Floor
1
-
-
Providing and fixing Salem Stainless steel A ISI (18/8) kitchen sink as per IS : 13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. a) Kitchen Sink with drain board Nirali make size 510 X 1040 (600X450X250)mm bowl depth 178 mm.
-
-
-
Second Floor
6
-
-
Supplying all materials, labour, T&P and providing fitting and fixing Aquaguard Hot & Cold(RO+UV) water purifier of size height 380(W)x1140(H)x340(D),14.9(W)x44.8(H)x13.3(D),dispense area height-9.4, weight-33 KG, cinoressir -230 V/50Hz compressor, with water storage capacity 15.5 liters etc.all complete as per approved drawing,specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
2
-
-
First Floor
2
-
-
Second Floor
2
-
-
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. (600x600mm of Kajaria-Fogparla or equivalent make)
-
-
-
Ground Floor
101.62
-
-
First Floor
82.96
-
-
Second Floor
50.9
-
-
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.(600x300mm Kajaria-Duren marfil or equivalent make)
-
-
-
Ground Floor
342.74
-
-
First Floor
179.99
-
-
Second Floor
112.35
-
-
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
-
-
-
Ground Floor
126
-
-
First Floor
132.3
-
-
Second Floor
50.4
-
-
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
-
-
-
Ground Floor
36
-
-
First Floor
37.8
-
-
Second Floor
14.4
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
Ground Floor
342.74
-
-
First Floor
179.99
-
-
Second Floor
112.35
-
-
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
-
-
-
Ground Floor
342.74
-
-
First Floor
179.99
-
-
Second Floor
112.35
-
-
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
-
-
-
250mmx250mm with RCC cover
12
-
-
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
-
-
-
Inside size 760mm x760mm x450mm
12
-
-
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
-
-
-
110 mm dia U-PVC pipes Class-3 (0.60 mpa) (all round concrete)
110
-
-
160 mm dia U-PVC pipes Class-3 (0.60 mpa) (all round concrete)
120
-
-
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
-
-
-
Inside size 900mmx900mmx900mm
20
-
-
addl depth of 0.30m upto 4.50m depth
4
-
-
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
-
Construction 100 users RCC Septic tank- 2 Nos.
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
118.8
-
-
- do - with addl. Depth of 1.5 m
75.24
-
-
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
11.86
-
-
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
11.88
-
-
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
6.94
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
55.74
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
For Roof slab
74.3
-
-
For RCC wall
256.8
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor
44.6
-
-
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
167.64
-
-
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
4
-
-
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
20
-
-
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
21.6
-
-
BOREWELL 2NOS
-
-
-
Construction of 2 No production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.
-
-
-
Drilling of 200mm dia bore
-
-
-
00 mtr to 30mtr
60
-
-
30 mtr to 45mtr
30
-
-
Drilling of 150mm dia bore
-
-
-
45 mtr to above
190
-
-
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
-
-
-
00 mtr to 30mtr
60
-
-
30 mtr to 45mtr
30
-
-
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80) pipe
90
-
-
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
-
-
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
2
-
-
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
4
-
-
DOL Control panel
4
-
-
40mm dia steel short piece
2
-
-
Well cap
2
-
-
50mm size CI bracket
2
-
-
2.50sqmm flat cable
180
-
-
20mm dia rigid UPVC pipes
70
-
-
Steel rope with cover
70
-
-
Labour charges for lowering including transportation
2
-
-
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
32mm HDPE pipes (Finolex/Supreme make)
170
-
-
UG TANK (50KLD)
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
-
-
-
All type of Soil
54
-
-
- do - with addl. Depth of 1.5 m
36.18
-
-
Supplying of filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge.
5.4
-
-
Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand : 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.
2.7
-
-
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
Base
8.1
-
-
Wall
8.4
-
-
Slab
3.38
-
-
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge.Cold Twisted bars, Thermo-Mechanically-treated bars.
26.82
-
-
Waterproofing Treatment :- Ponding test first to be done, application of Nerolac-Perma Coat & Seal in 2 coats over the roof slab & continue over the parapet wall reinforced with Nerolac-Perma Non-Woven Polyester Fabric coving with 1:4 C.M admixed with Nerolac-Perma Plast-o-Proof STD @ 100 gram per 50kg cement over the joint terrace to parapet over bond coat Nerolac-Perma latex SBR (1:4:6) followed by a the protection screed (1:1.5:3) in panel of size 2 mtr x 2 mtr to drain the water towards the rain water pipe & finally filled the grooves 8mm x 10mm with Nerolac-Perma Polyseal (Poly Sulphide Sealant) complete as per manufacture specification & direction of engineer in charge. N:B: All the waterproofing treatment shall be executed by an authorized applicator of our company. A written guarantee on non-judicial stamp paper shall be submitted by the applicator for a minimum period of 5(Five) years from the date of completion for the satisfactory performance of the entire waterproofing treatment system.
27
-
-
MEDICAL GAS PIPE LINE SYSTEM
-
-
-
OXYGEN SYSTEM
-
-
-
SITC for Oxygen Outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate etc. complete as required
-
-
-
Oxygen Gas Outlet Point with Adopter
Make-Medinited/Unistar/Unitech
70
-
-
SITC of oxygen manifold of Size (10 working + 10 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 20 nos. pig tail pipes. it should be suitable to withstand a working pressure of 145 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required.
-
-
-
Oxygen Manifold 10 + 10 With Tail Pipe & Nrv
Make-Medinited/Unistar/Unitech
1
-
-
SITC of oxygen manifold of Size (3 working + 3 Standby) for Indian type bulk cylinders, high pressure copper annealed tail pipes complete with middle frame, chains for individual bulk oxygen cylinder, NRV's and 6 nos. pig tail pipes. it should be suitable to withstand a working pressure of 130 kg/cm2 and should be tested at 300 kg/cm2. etc. complete as required.
-
-
-
Oxygen Manifold 3+3 Emergency With Regulator Make-
Medinited/Unistar/Unitech
1
-
-
SITC of Semi-Automatic oxygen control panel. Visual indication of the manifold is provided by 3 guages within control panel, Indicating Pressure of the right & Left hand bank and the supply pressure from control panel to distribution system with sensing faciliteies to provide visual signals na other anciliary services such as heaters. Pannel should be fitted with audio alarm indication for changeover of empty cylinder. The entire manifold will be hydraulically tested at 130 Kg/Cm2 pressure, duly degreased foroxygen Service, and supplied in sealed cover, ready for assembly at site etc. complete as required. (Note : Excluding Supply of cylinder.( Make- Medinited/Unistar/Unitech)
-
-
-
Oxygen Semi-Control Panel Make-Medinited/Unistar/Unitech
1
-
-
SITC for Oxygen flowmeter complete with humidifier bottle, The flow meter must be constructed with chromium plated brass body, extremely robust, to take care of the day to day usage demand. Flow meter cartridge type knob : easy to maintain, offers optimum adjustment quality and superior designing and engineering to provide high level of accuracy, with no significant affect from restrictions caused by down-stream equipments. The flow meters should be 0-15 LPM range for oxygen. etc complete as required.
-
-
-
Oxygen Flow Meter With Humdifire Bottle
Make-Medinited/Unistar/Unitech
55
-
-
VACCUM SYSTEM
-
-
-
SITC for Vacuum outlets as per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.
-
-
-
Vaccum Gas Outlet Point with Adopter
Make-Medinited/Unistar/Unitech
30
-
-
Ward Vaccum Regulator with 600ml jar
Make-Medinited/Unistar/Unitech
30
-
-
Vaccum Pump Type , Cap:- 5 Hp
• 5 HP motor with suitable starter, mounted on base frame, complete with wiring, switched, interconnecting pipes and isolation valve(s).
• The vacuum pressure isn’t exceeding 29.4 in Hg with flow volume 60 cfm.Make :- Anest Iwata
2
-
-
Vaccum Reciver , Cap:-500 Ltr
The receiver assembly shall be fitted with a pressure safety valve capable of passing the maximum flow output of the compressor at 10% receiver overpressure. The receiver shall be further protected by a safety pressure relief valve and include a pressure gauge.
Make :- Anest Iwata
1
-
-
Pressure Filter
2
-
-
COMPRESSED AIR SYSTEM
-
-
-
Compressed M.Air- 4 Bar outlets as Per standards , Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.
-
-
-
Air Gas Outlet Point with Adopter
Make-Medinited/Unistar/Unitech
30
-
-
Air Compressor , Cap:- 7.5 Hp
• Oil free Reciprocating Base Mounted two stage oil free with three phase Motor Compressor.
• 7.5HP electric motor Base mounted
• Maximum pressure 8.5 of minimum 24.5 cfm.
• Other hardware complete with wiring, switches, interconnecting pipes and isolation valve(s).Make :- Anest Iwata
2
-
-
Air Receiver , Cap:-500 Ltr
The receiver assembly shall be fitted with a pressure safety valve capable of passing the maximum flow output of the compressor at 10% receiver overpressure. The receiver shall be further protected by a safety pressure relief valve and include a pressure gauge.
Make :- Anest Iwata
1
-
-
Air Dryer ,Cap:-40 CFM ,
Make-Trident/ Sumit Dryer
1
-
-
Pressure Regulator
4
-
-
NITRUS SYSTEM
-
-
-
Nitrous Oxide outlets as Per standards, Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be permanently fixed to the backplate, etc. complete as required.
-
-
-
Nitrus Gas Outlet Point
Make-Medinited/Unistar/Unitech
2
-
-
(6working + 6 Standby) size of N2O manifold complete with middle frame, chains, NRV's 12 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.
-
-
-
Nitrus Manifold 2 + 2 With Tail Pipe & Nrv
Make-Medinited/Unistar/Unitech
1
-
-
(3 working + 3 Standby) size of N2O manifold complete with middle frame, chains, NRV's 6 nos. pig tail pipes, Manifold should have high pressure copper annealed tail pipes with one end having brass bull nose suitable for Nitrous Oxide cylinders and other end suitable for Manifold non- return Valves. Each manifold will have one terminal header and a NPT connection for the Automatic Control Panel. etc. complete as required.
-
-
-
Nitrus Manifold 1+1 Emergency With Regulator
Make-Medinited/Unistar/Unitech
1
-
-
Semi-Automatic N2O control panel. With heater, The entire manifold will be hydraulically tested at 250 Kg/Cm2 pressure, duly degreased ,etc complete as required
-
-
-
Nitrus Semi-Control Panel
Make-Medinited/Unistar/Unitech
1
-
-
Distribution Copper Pipe EN: 13348,Make:-Janya/Mandev
-
-
-
Medical Grade copper pipe with required copper fittings, All pipes shall be drawn half hard temp., solid drawn, seamless, phosphorous deoxidised, non-arsenic and degreased copper pipe conforming to EN BS: 13348:2008/ASTM B819 standard ,EN 1057:1996 (originally BS 2871-1971 Part 1 (Table X) and chemical composition as per BS-6017 of 1981 table 2, The supplies of copper pipe would be accompanied with manufacturers test certificate for the physical properties of copper pipes and their Chemical composition. The supply of pipes be further substantiated with inspection certificate from the third party like Lloyds Register. etc. complete as required.
-
-
-
Copper Pipe 12 MM X 0.7 OD
260
-
-
Copper Pipe 15 MM X 0.9 OD
550
-
-
Copper Pipe 22 MM X 0.9 OD
570
-
-
Copper Pipe 28 MM X 0.9 OD
530
-
-
Copper Pipe 42 MM X 1.2 OD
50
-
-
Isolation Ball Valve 12 MM (MAKE:-MATRIX)
9
-
-
Isolation Ball Valve 15 MM (MAKE:-MATRIX)
15
-
-
Isolation Ball Valve 22 MM (MAKE:-MATRIX)
8
-
-
Isolation Ball Valve 28 MM (MAKE:-MATRIX)
8
-
-
Isolation Ball Valve 42 MM (MAKE:-MATRIX)
2
-
-
Valve With Valve Box 2 Gas (1gas+1Vac)
Make-Medinited/Unistar/Unitech
3
-
-
Valve With Valve Box 3 Gas (2gas+1Vac)
Make-Medinited/Unistar/Unitech
4
-
-
Area Alarm System
Make-Medinited/Unistar/Unitech
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements