Rural Development Department Tender

Providing fixing ceramic tiles fixing in dadoos skriting and rises of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles includingpolishing complete including cost of pre cast tiles watering & curing for 7 days with cost conveyance royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of all materials & labour T&P with Cess required for the work etc, complete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge.

Supplying,fitting,fixing up Window (sliding type) made up aluminum Section 9778 as windows frame ,Section No.4095,4096 and 9777,3994 as shutter frame with Mosquito net as panel fitted with rubber beading including locking arrangement including cost of materials alllabour,T&P excluding cost of glass etc.complete as per direction of Engineer-in-charge.

Providing & fixing Plain Gypsum board celling suspended from roof by adjustableGI ceiling angle with spread at a distance notmore than 600mm fixed to roof by Rowl Plug &stiff cleart . Gypsum board 12.5 mm thick held by G.I Perimeter channel MF-3 & intermediate channel MF-7 framing , boarding, jointing &finishing with special type of Gypsum compound etc .including cost, conveyance &of all materials labour with T&P & Cess etc completein all respect as per direction of EIC.

Providing fixing and fitting of Cornice for Gypsum board ceilling 4" wide of approved quality and approved make confirming to I S with neCessary bends etc complete fixed to wall with Screw etc as per the direction of Engineer in charge including cost of all materials withlabour T & P Cess etc complete.

Clamp Burnt brick masonary in Cement Mortar (1:6) in foundation/Superstructure using CB -brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. Super-structure

R.C.C. work ofproportion(1:1:5:3) using 12mm size hard black crusherbroken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying & compacting concrete, watering and curing for 4 weeks, centering, shuttering & finishing the exposed surface smooth to recieve painting or white or colour wasing providing grooves or beads where necessary with cost, conveyance, royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, of all materials and labour with T&P Cess required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charge for straightening, cutting, bending, binding etc. of the M.S. Rods or Tor steel and binding wire and laying the grills and placing in proper position etc complete and as per specification & direction of Engineer-in-charge. RCC Chajja

Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance &of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge.

Distempering one coat to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance of allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge.

Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25 Kg/Sqm and 1.50mm thickness consisting of layers having centre core of 20 microns thermo plastic high molecular high density polyethylene H.M.H. D.P.E film of grade 2504 including priming the surface with bituminous primer @0.30Kg/Sqm providing a coat of hot blown bitumen of 1.32Kg/Sqm applying and laying plastic felt membrane with 10cm overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with layers of hot blown bitumen @1.20Kg/Sqm etc complete including cost, conveyance of all materials and labour with T&P and Cess etc, required for the work complete as per specification and direction of Engineer-in-charge.