Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 37,69,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_105495_1Bid Award Id
ViewTender No
C.E.-CUM-ADDL. SECY. (B) - 09 / 2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
DRAIN
168.11
-
-
COMPOUND WALL
326.11
-
-
PARKING & PAVING
156.94
-
-
Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department, required for the work complete including cost of all labour,labour cess,T&P etc. as directed by the Engineer in charge.
-
-
-
Building Proper
3132.37
-
-
Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.
-
-
-
Building Proper
10493.44
-
-
INTERNAL ROAD
207.9
-
-
DRAIN
112.07
-
-
COMPOUND WALL
217.41
-
-
Random rubble hard granite stone masonry in clay or sand or gravel grouted in foundation and plinth as directed by the Engineer-In-charge.
-
-
-
Building Proper
1992.9
-
-
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
-
-
-
Building Proper
2067.03
-
-
DRAIN
30.38
-
-
COMPOUND WALL
67.75
-
-
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
-
-
-
Building Proper
2741
-
-
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
-
-
-
Building Proper
332.15
-
-
DRAIN
30.38
-
-
COMPOUND WALL
33.88
-
-
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 12mm nominal size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
-
-
-
Building Proper
292.46
-
-
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
COMPOUND WALL
73.89
-
-
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
Building Proper
-
-
-
Basement
37.87
-
-
Stilt Floor
139.41
-
-
First floor
142.52
-
-
Second floor
145.97
-
-
Third floor
140.22
-
-
Fourth floor
140.22
-
-
Fifth Floor
165.76
-
-
Terrace floor
73.7
-
-
COMPOUND WALL
119.18
-
-
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
Stilt Floor
3.5
-
-
First floor
28.05
-
-
Second floor
14.89
-
-
Third floor
25.82
-
-
Fourth floor
25.82
-
-
Fifth Floor
24.03
-
-
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
-
-
-
Footings
-
-
-
Building Proper
4004.85
-
-
R.C.C COLUMN
-
-
-
Basement
92.64
-
-
Stilt Floor
78.24
-
-
First floor
69.46
-
-
Second floor
69.46
-
-
Third floor
69.46
-
-
Fourth floor
69.46
-
-
Fifth Floor
72.77
-
-
Terrace floor
16.17
-
-
R.C.C WALL
-
-
-
Basement
231.02
-
-
R.C.C LINTEL
-
-
-
Basement
2.81
-
-
Stilt Floor
7.06
-
-
First floor
10.53
-
-
Second floor
8.29
-
-
Third floor
10.98
-
-
Fourth floor
10.98
-
-
Fifth Floor
10.92
-
-
Terrace floor
0.8
-
-
R.C.C ROOF BEAM
-
-
-
Basement
180.69
-
-
Stilt Floor
78.69
-
-
First floor
78.69
-
-
Second floor
81.36
-
-
Third floor
78.69
-
-
Fourth floor
78.69
-
-
Fifth Floor
78.69
-
-
Terrace floor
7.91
-
-
R.C.C ROOF SLAB
-
-
-
Basement
384.85
-
-
Stilt Floor
184.48
-
-
First floor
170.77
-
-
Second floor
170.77
-
-
Third floor
170.77
-
-
Fourth floor
170.77
-
-
Fifth Floor
156.86
-
-
Terrace floor
18.6
-
-
R.C.C STAIRCASE
-
-
-
Basement
15.32
-
-
Stilt Floor
10.45
-
-
First floor
10.45
-
-
Second floor
10.45
-
-
Third floor
10.45
-
-
Fourth floor
10.45
-
-
Fifth Floor
10.45
-
-
R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
DRAIN
-
-
-
Base
30.38
-
-
Wall
40.32
-
-
Slab
20.93
-
-
COMPOUND WALL
-
-
-
Footings
56.93
-
-
Plinth beam
21.59
-
-
Column
28.35
-
-
Roof Beam
21.59
-
-
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL/ SEL Tiger (grade Fe-500D) etc. including bending, binding, welding, wastage & over lapping and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Basement
5825.75
-
-
Stilt Floor
591.04
-
-
First floor
560.39
-
-
Second floor
564.27
-
-
Third floor
560.96
-
-
Fourth floor
560.96
-
-
Fifth Floor
555.95
-
-
Terrace floor
78.87
-
-
DRAIN
54.98
-
-
COMPOUND WALL
151.18
-
-
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Inside)
-
-
-
Basement
188.21
-
-
Stilt Floor
287.4
-
-
First floor
782.51
-
-
Second floor
736.27
-
-
Third floor
966.77
-
-
Fourth floor
959.57
-
-
Fifth Floor
926.93
-
-
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Outside)
-
-
-
Stilt Floor
572.49
-
-
First floor
438.69
-
-
Second floor
419.25
-
-
Third floor
412.65
-
-
Fourth floor
412.65
-
-
Fifth Floor
488.84
-
-
Terrace floor
454.78
-
-
COMPOUND WALL
1144.08
-
-
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Inside)
-
-
-
Basement
188.21
-
-
Stilt Floor
819.13
-
-
First floor
765.32
-
-
Second floor
853.69
-
-
Third floor
812.36
-
-
Fourth floor
812.36
-
-
Fifth Floor
890.23
-
-
Terrace floor
440.08
-
-
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
Basement
4598.78
-
-
Stilt Floor
1221.18
-
-
First floor
1232.37
-
-
Second floor
1296.33
-
-
Third floor
1288.8
-
-
Fourth floor
1288.8
-
-
Fifth Floor
1204
-
-
Terrace floor
95.16
-
-
Fixing granite stone tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads, riser of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
Basement
106.68
-
-
Stilt Floor
201.17
-
-
First floor
84.57
-
-
Second floor
84.57
-
-
Third floor
84.57
-
-
Fourth floor
84.57
-
-
Fifth Floor
84.57
-
-
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON / RAK / SOMANY/ KAJARIA) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
Basement
2809.4
-
-
Stilt Floor
2697.44
-
-
Fixing of Kota stone tiles of minium thickness 16mm thick of premium grade of size above 0.10 Sqm. in floors over 20mm thick bed of cement mortar 1:4 (1cement:4course sand)and filling the joint with white cement mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
Basement
140.93
-
-
Stilt Floor
37.2
-
-
First floor
39.96
-
-
Second floor
39.96
-
-
Third floor
39.96
-
-
Fourth floor
39.96
-
-
Fifth Floor
39.96
-
-
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
Stilt Floor
149.63
-
-
First floor
989.81
-
-
Second floor
939.48
-
-
Third floor
976.29
-
-
Fourth floor
976.29
-
-
Fifth Floor
1056.88
-
-
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess completein all respect as directed by the Engineer in charge.
-
-
-
Stilt Floor
16.91
-
-
First floor
61.16
-
-
Second floor
62.62
-
-
Third floor
63.73
-
-
Fourth floor
63.73
-
-
Fifth Floor
77.72
-
-
Supplying , fitting and fixing of openable UPVC doors with door frame of approved make (FENESTA/ NCL VEKA LTD./ Koemmerling/ DURAPLAST/ Rajshri) with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including all cost, conveyance, royalty of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
Stilt Floor
2.16
-
-
First floor
22.08
-
-
Second floor
21.6
-
-
Third floor
12.96
-
-
Fourth floor
12.96
-
-
Fifth Floor
25.92
-
-
Supplying, fitting and fixing of two track UPVC sliding window of apporoved make (FENESTA/ NCL VEKA LTD./ Koemmerling/ DURAPLAST/ Rajshri) with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including all cost, conveyance, royalty of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
Basement
27.54
-
-
Stilt Floor
20.79
-
-
First floor
95.43
-
-
Second floor
62.37
-
-
Third floor
60.57
-
-
Fourth floor
60.57
-
-
Fifth Floor
50.63
-
-
Terrace floor
9.9
-
-
Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .
-
-
-
First floor
20.1
-
-
Second floor
16.1
-
-
Third floor
23.1
-
-
Fourth floor
23.1
-
-
Fifth Floor
23.1
-
-
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
First floor
19.44
-
-
Second floor
9.36
-
-
Third floor
29.52
-
-
Fourth floor
29.52
-
-
Fifth Floor
26.64
-
-
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
Basement
688.5
-
-
Stilt Floor
2410.88
-
-
First floor
2633.34
-
-
Second floor
2007.75
-
-
Third floor
1926.75
-
-
Fourth floor
1926.75
-
-
Fifth Floor
1265.63
-
-
Terrace floor
487.5
-
-
COMPOUND WALL
622.5
-
-
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
Basement
4975.2
-
-
Stilt Floor
2900.2
-
-
First floor
3218.89
-
-
Second floor
3305.54
-
-
Third floor
3480.58
-
-
Fourth floor
3480.58
-
-
Fifth Floor
3510
-
-
Terrace floor
990.02
-
-
COMPOUND WALL
1144.08
-
-
Wall painting two coats with anti-fungal Weather coat water proofing paint (1st quality) exterior grade of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
Basement
704.89
-
-
Stilt Floor
572.49
-
-
First floor
438.69
-
-
Second floor
419.25
-
-
Third floor
412.65
-
-
Fourth floor
412.65
-
-
Fifth Floor
488.84
-
-
Terrace floor
454.78
-
-
COMPOUND WALL
1144.08
-
-
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
Basement
2940.78
-
-
Stilt Floor
2327.71
-
-
First floor
2780.2
-
-
Second floor
2886.29
-
-
Third floor
3067.93
-
-
Fourth floor
3067.93
-
-
Fifth Floor
3021.16
-
-
Terrace floor
535.24
-
-
Painting two coats with Plastic Emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI/ Dulux/ equivalent make)
-
-
-
Basement
2940.78
-
-
Stilt Floor
2327.71
-
-
First floor
2780.2
-
-
Second floor
2886.29
-
-
Third floor
3067.93
-
-
Fourth floor
3067.93
-
-
Fifth Floor
3021.16
-
-
Terrace floor
535.24
-
-
Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).
-
-
-
Basement
13.77
-
-
Stilt Floor
23.09
-
-
First floor
52.67
-
-
Second floor
40.16
-
-
Third floor
38.54
-
-
Fourth Floor
38.54
-
-
Fifth Floor
25.31
-
-
Terrace floor
24.15
-
-
COMPOUND WALL
9.45
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. (Make-JINDAL )
-
-
-
Basement
236.29
-
-
Stilt Floor
365.74
-
-
First floor
159.99
-
-
Second floor
159.99
-
-
Third floor
159.99
-
-
Fourth Floor
159.99
-
-
Fifth Floor
159.99
-
-
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
Second floor
82.28
-
-
Terrace floor
1150
-
-
FIRE DOOR FRAME :-
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge.
-
-
-
Basement
47.6
-
-
Stilt Floor
40.8
-
-
First floor
27.2
-
-
Second floor
27.2
-
-
Third floor
27.2
-
-
Fourth floor
27.2
-
-
Fifth Floor
40.8
-
-
FIRE DOOR SHUTTER :-
Providing and fixing 60 mm thick Metalic fire resistant door shutters of 120 min Fire Rating confiming to iS 36 14 (Pat 11) or ENI634-11999, tested and cetified as per laboratory approved by Eingineer-in charge, with suitable mounting on door frame, consisting of vertical sayles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 2 10 mim x 60 mm made out of 1 omm thick GI sheet (zinc coating not less than 120gm/m') duly illed mineral wool insulation having density min 96 k/m' and fixing with necessaty stainless steel ball bearnng hinges of size 100x89x3mm & Bottle Type ilydraulic Door Closer of upproved make, inchudmg applying a coat of approved re esistant primer or powder coating not less than 30 micron cte all complete as per directon of Engneer in-charge.
-
-
-
Basement
33.6
-
-
Stilt Floor
28.8
-
-
First floor
19.2
-
-
Second floor
19.2
-
-
Third floor
19.2
-
-
Fourth floor
19.2
-
-
Fifth Floor
28.8
-
-
Expansion joint Treatment Supplying and fixing of Elastomeric Membrane of 200mm x 2mm size for expansion joint sealing from approved manufacturer, fixing with epoxy adhesive of approved quality complete as per the direction of the Engineer-in-charge.
-
-
-
Basement
142.5
-
-
Waterproofing Treatment :- Quick Setting Basement Raft foundation P.C.C.
Basement Floor & Retaining Walls Waterproofing:-a)Pcc casting :- Providing & casting PCC after mental & sand compaction mixing with perma plast Clear QS dose @3% to 8% by weight of cement.(Annex building Item no-40)
-
-
-
Basement
3288.3
-
-
Waterproofing Treatment of PCC:-
Providing & applying two coats of perma Guard 2K elastic liquid static crack bridging 0.5mm, 7 water bar capacity, Elongation breack 50%, Adhesion to Concrete 1N/Sq.mm, pack acrylic cementitious waterproofing coating system reinforeced with perma non Oven polyester Fabric.Providing plaster shall be done average 20mm thick protective in C.M in ratio 1:4 & admixed with polypropylene fibre perma recon fibric 6mm @ 100 grams per bag of cement & integral waterproofing compound perma plast - o-proof STD @ 100 gram / bag of cement.Plastering over a bond coad perma latex SBR IN RATIO 1:4:6 (1part perma latex SBR: 4 part of water : 6 part of cement) Complete as per direction of engineer in charge & manufacture specification. Complete with all respect as per direction of the engineer in charge & manufacture instruction. Consumption is 1.5kg to 2kg per sq.mtr in 2coats.
-
-
-
Basement
2564.36
-
-
Waterproofing Treatment :- Retaining wall Joint
Providing & applying perma Hydroswell (20mm x 5mm) Over 2 components epoxy bonding agent perma master Bond in Horizontal cold joints before casting. Raft to Starter & every joint thereafter.
-
-
-
Basement
213.6
-
-
Waterproofing Treatment :- Terrcae Roof Top Surface-
Providing and installing two component acrylic modified cementitious waterproofing coating with masterseal 551/Equivalent over roof slab after carrying out pond test on roof slab filling all defects, saturating the surface mixing the products and then application in 2 mm thickness (1.8kg/sqm coverage rate for 1mm thickness ) in suitable layers complete in all respect, all materials, tools,plant & labour complete in all respect.
-
-
-
Second floor
82.28
-
-
Terrace floor
1150
-
-
Waterproofing Treatment :-Retaining wall
Waterproofing tratment to outer surface of retaining walls :- Surface Cleaning with wire brush & chisel Where required to make the foreign particles & dead mortars. Any surface cracks shall be cut in U grooves 50mm x 50mm & filled with perma Polycrete HD. Drilling and Fixing of G.I Nozzel at the Construction and other area for the injection of cement Slurry admixed with Expanding grout perma Grout-500 @1% by weight of Cement & perma latex SBR @ 500 ml per bag of cement with manual grouting machine with pressure of 2Kg/Sq.cm Nozzle Should be fixed with quick setting admixture Perma plast clear QS & to be cut off after 24 hours of injection grouting. Providing & applying in coats perma guard 2K elastic liquid Static crack bridging 0.5mm , 7 water bar capacity, Elongation breack 50% Adhesion to concrete 1 N/sq.mm ,2pack acrylic Cementitious waterproofing coating System reinforced with perma Non Oven polyester Fabric. Consumption is 1.5 kg to 2Kg per Sq.mtr in coats. Providing Plaster shall be done average 20mm thick protective in C.M in ratio 1:4 & admixed with polypropylene fibre perma recon Fibre 6mm @ 100 grams per bag of cement & intergal waterproofing Compound Perma plast -O-Proof STD @100 gram / bag of cement. Plastering Over a bound coat perma Latex SBR in ratio 1:4:6 (1 part perma latex SBR : 4 part of water : 6 part of cement) complete as per direction of engineer in charge & manufacture specification. N:B: All the Waterproofing treatment shall be executed by an authorized applicator of our company. A written guarantee on non -judical Stamp paper shall be submitted by the applicator for a minimum period of 5(Five) years from the date of completion for the Satisfactory performance of the entire waterproofing treatment system.
-
-
-
Basement
693
-
-
Waterproofing tratment of Lift Pit :- Cleaning with Surface with wire brush & Chipping the dead mortar exposing the cold construction joints (25mm x25mm) grooves Honeycombs, Filling with perma Polycrete HD & cementitious pressure grouting of joints with expanding grout perma Grout -500 @ 0.5kg +Perma latex SBR @ 0.5 Ltr / bag of cement . providing & applying two coats perma Guard 2k elastic liquid static bridging 0.5mm , 7 water bar capacity, Elongation break 50%, Adhesion to concrete 1 N/Sq.mm ,2 pack acrylic cementitious waterproofing coating System. Consumption is 1.5kg to 2kg per sqmtr in two coats followed by a protection plaster over a bond coat of parma latex SBR 1:4:6 in ratio and finish with neat cement punning in cementt as per manufacturer specification and direction in engineer in charge. N:B: All the waterproofing treatment shall be executed by an authorized applicator of our company. A written guarantee or non judicial stamp paper shall be submitted by the applicator for a minimum period of 5(five) years from the date of complition for the statisfactory perfomance entire waterproofing treatment system.
-
-
-
Basement
63.23
-
-
Structural Glazing.
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474 including super durable powder coating of 60 80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
-
-
-
All Floors
1253.2
-
-
Structural Glazing.
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 675 part N (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc gaskets, screws, toggles, nuts, bolts, clamps etc, structural and weather silicone sealants flashings, fre stop (bamer)-cum-smoke seals, microwave cured EPDM gaskets for water lightness, pressure equalisation & drainage and protection against fire hazard including
-
-
-
(b) Fabricating and supplying serrated M.S. hot dip galvanised Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing systern rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a dean and controlled factory/work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for noiding glass (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
All Floors
192.8
-
-
UNISTONE GRC CUSTOMIZED SCREENS :-
Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.
-
-
-
Stilt Floor
171.75
-
-
First floor
131.61
-
-
Second floor
125.78
-
-
Third floor
123.8
-
-
Fourth floor
123.8
-
-
Fifth Floor
146.65
-
-
HPL Cladding :-
Supplying and fixing of Fundermax brand or equivalent Clades of standard dimension of 1300mm x 3050mm of thickness 6mm.(WOOD FINISH) for fixing used Al. sub structure is made up of Aluminum box sections of 38x38x2mm the. and 38x75x2mm the. The section size 75x38 x2mm will be using on the vertical joint of the two panels. As per the standard procedures in riveting system. Spacing of two verticals should always be maintained at 600mm. MS Brackets are of two types, Wind load brackets and Dead load brackets of size 85x50x5mm the. and to be placed in 1500 mm intervals in vertical. Wind load brackets will have vertical slot and Dead load brackets will have horizontal slots. Thermal separators to be placed between MS brackets and concrete structure. Bimetallic separators to be placed between Al. sub structure and MS brackets. Brackets fixing with nylon fasteners or self tapping bolts. Aluminum grid frame fixing in between brackets by ss nut and bolts.
-
-
-
After framing done the panels fixing started with maintaining 6mm horizontal and vertical gaps between one panels to another. For fixing of panels done by riveting. Rivet distance maintain horizontally 600mm and vertically 600mm Maximum. First drill hole of the panel for rivet should be maintain 40mm from top and 20mm from side. For proper ventilation providing 20mm gap on top and bottom of the facade for maintaining air circulation.Including all materials and labour complete as per drawing and direction of Engineer-in-charge at all floors and all heights. Note. The contractor will provide 10 year Guaranty certificate for the above clading works.
-
-
-
Stilt Floor
84.48
-
-
First floor
89.76
-
-
Second floor
89.76
-
-
Third floor
89.76
-
-
Fourth floor
89.76
-
-
Fifth Floor
89.76
-
-
MCM BRICK CLADDING :-
Supply of MCM Modified Clay Material ‐ MCM A Series Brick ‐ 240 x 60 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
Stilt Floor
55.44
-
-
Construction of granular sub-base by providing Close graded Granular subbase Grading-VI material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MOSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
INTERNAL ROAD
315
-
-
PARKING & PAVING
200.14
-
-
Providing of dry lean cement concrete sub base for concrete pavement using concrete mixture placing and leveling in hand guided semi mechanism method and finished as per approved Drawing & Technical specifications in accordance with section 601- of MoSRT &H Specification of road and Bridge work
-
-
-
INTERNAL ROAD
210
-
-
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and
fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous
operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (4th Revision) as per the direction of Engineer in-charge.
-
-
-
INTERNAL ROAD
525
-
-
Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect confirming to IS 5758:1984 as per the direction of Engineer in-charge.
-
-
-
INTERNAL ROAD
1866
-
-
PARKING & PAVING
251
-
-
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018 as per the direction of Engineer in-charge.
-
-
-
PARKING & PAVING
1334.25
-
-
Providing and Fixing 150mm dia G.I. Pipe ( TATA Medium) Section for cow catcher including all materials and labour complete.
-
-
-
COMPOUND WALL
36
-
-
E.I. WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
254
-
-
-do- light point Group-B
270
-
-
-do- light point Group-C
330
-
-
-do- Fan point Group-B
85
-
-
-do- Fan point Group-C
157
-
-
-do- Call Ball point Group-C
20
-
-
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
300
-
-
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
200
-
-
Supplying,fixing of having provision of 3 nos 6 amp plug with 6amp switch on separated board(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
250
-
-
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
20
-
-
Supplying,fixing of 16 A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) ( ( flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (vision) . (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
60
-
-
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in chargeMake-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (vision)
242
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty HMS FRLS PVC conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2750
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty HMS FRLS PVCconduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
4000
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty HMS FRLS PVC conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
3200
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty HMS FRLS PVC conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
1970
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty HMS FRLS PVC conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
2200
-
-
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty HMS FRLS PVC conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X16+2X10)
650
-
-
FITTING & FIXTURE WITH CABLING:-Supply & Installation of surface LED Luminarie of Mirror Light (5W) of Make:-Wipro CAT No:(LL 20 ) 100 Lumen per watt / Philips/Bajaj/LT /panasonic/crompton/havells
22
-
-
Supply & Installation of GATE LED Light (45 Watt) of Make:-Wipro CAT No:(LP 05 ) / Philips/crompton/Bajaj/LT /panasonic/Havells.
4
-
-
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
200
-
-
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
25
-
-
Supplying, installation, testing and commissioning of 450 mm Heavy Duty Exhaust fan / fresh air fan. (Make - Usha/ Orient/ Havells/bajaj/crompton)
20
-
-
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
600
-
-
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
200
-
-
SITC Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. (04 nos for main panel & equipement ,04 nos for DG SET )
18
-
-
SITC of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
15
-
-
Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
500
-
-
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
500
-
-
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
150
-
-
Supplying & Installing following size of Perforated Hot dipped galvanised Iron cable tray with perforation not more than17.5% in convenient sections joined with connectors, suspended from the ceiling with GI suspenders including GI nut & bolts as required. 150 mm width X 60 mm depth X 1.6 mm thickness make: OBO/Profab/Neidax
200
-
-
400 mm width X 60 mm depth X 1.6 mm thicknessmake: OBO/Profab/Neidax
300
-
-
300 mm width X 60 mm depth X 1.6 mm thicknessmake:OBO/Profab/Neidax
300
-
-
500 mm width X 60 mm depth X 1.6 mm thicknessmake: OBO/Profab/Neidax
270
-
-
BDB'S ,MCB,RCBO,RCCB & PANEL :-DBS- Supplying and fixing following way, TP and neutral, (8+24)sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.as per direction of Engg.-in-Charge (But without MCB/RCBOs/ISOLATORS)- 8 way, Double door . (Make : Schneider (ACTI 9 ) /legrand(Ekinox3)/siemens(betaguard))
4
-
-
DBS- Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required as per direction of Engg.-in-Charge. (But without MCB/RCBOs/ISOLATORS)- 4 way, (8+12)Double door as LDB. (Make : Schneider (ACTI 9 ) /legrand(Ekinox3)/siemens(betaguard)
33
-
-
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years (Make : Schneider (ACTI 9 ) /legrand(Ekinox3)/siemens(betaguard)
2
-
-
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years (Make : Schneider (ACTI 9 ) /legrand(Ekinox3)/siemens(betaguard)
2
-
-
Supplying and fixing 6-32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
5
-
-
Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
444
-
-
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
12
-
-
Supplying and fixing 40 amps rating, 415 volts, C series,10KA breaking capacity, FOUR poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
12
-
-
Supplying and fixing 63 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
2
-
-
Supplying and fixing 63Amps 4P 415 volts MCB ,10 Ka breaking Capacity Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 3 years.
30
-
-
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The RCCB should be Replacement Warranty will be 3 years.
25
-
-
PANEL:-Supply, installation,testing & commissioning of CPRI approved floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-55 protection with hinged and lockabale doors.2 mm CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 50 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.MAKE- Legrand/Siemens/Schneider MAIN PANEL should have provision for 1nos 2000A 4p ,50ka microprocessor based ACBv with Breaking(with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. as incomer ,1000A ,50ka FP ACB as buscoupler ,1000 A 50 ka acb with Breaking(with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. as dg incomer , 1 Nos 800Amp,36ka 3 Pole MCCB Icu=100%Ics, 36KA, LSIG MCCB with adjustable Microprocessor based Release with Ics=100% Icu.for APFC,1 nos 1250 50ka EDO Microprocessor based ACB with Breaking(with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data,1 Nos 630Amp,36ka 4 Pole MCCB Icu=100%Ics, 36KA, LSIG MCCB with adjustable Microprocessor based Release with Ics=100% Icu., 1nos 400A 4P MCCB 36 KA Icu=100%Ics, 36KA, LSIG MCCB with adjustable Microprocessor based Release with Ics=100% Icu. ,250A, 36 ka 4P MCCB Icu=100%Ics, 36KA, LSIG MCCB with adjustable Microprocessor based Release with Ics=100% Icu. 8Nos, 125 A,25 ka 4P MCCB Icu=100%Ics, , LSIG MCCB with adjustable Microprocessor based Release with Ics=100% Icu. 12 Nos as Out going Feeder . All fedder should have Multifunction meter suitable for three phase four wire system, CL 0.5, energy meter should be 2nos RJ45/TCP/IP /RS 485 port for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr THp. & on off trip ,sc,TC indication 3 nos Surge Protective Device of 65KA type 1+2 .as required as per direction of Engg.-in-Charge.(make of ACB--Schneider(MASTERPACT )/ Siemens(3WT)/ Legrand(DMX SP),make pf MCCB-Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS Make of MCB/SPD-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
1
-
-
Supply of CPRI approved 250A Sub panel having following specification 2mm thick sheet 400A copper . busbar ,duly treated by 7 tank treatment process, Provision of 1nos 250 A,25 ka ,4p MCCB with adjustable Microprocessor based Release with Ics=100% Icu as Incomer,outgoing feeder : 63A FP 10KA MCB ,C SERIES 8 NoS, Surge protective device 40KA 3P+N TYPE-2, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.(Power sub panel EACH FLOOR)make Of MCCB-Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS
Make of MCB/SPD-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
8
-
-
Supply of CPRI approved 125A Sub panel having following specification 2mm thick sheet 250A copper . busbar ,duly treated by 7 tank treatment process, Provision of 1nos 125 A,25 ka ,4p MCCB adjustable thermal & fixed magnetic type Icu=100%Ics as Incomer,outgoing feeder : 40A FP 10KA MCB ,C SERIES 6 NoS, Surge protective device 40KA 3P+N TYPE-2, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.(Power sub panel EACH FLOOR)make Of MCCB-Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS
Make of mcb-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
8
-
-
Supply of CPRI approved 100A Sub panel having following specification 2mm thick sheet 250A copper . busbar ,duly treated by 7 tank treatment process, Provision of 1nos 100 A,25 ka ,4p MCCB adjustable thermal & fixed magnetic type Icu=100%Ics as Incomer,outgoing feeder : 40A FP 10KA MCB ,C SERIES 6 NoS, Surge protective device 40KA 3P+N TYPE-2, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.(Power sub panel EACH FLOOR)make Of MCCB-Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS
Make of MCB/SPD-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
8
-
-
Supply of CPRI approved 1250 A ,36 ka EDO microprocessor based ACB with Breaking(with earth leakage relay) capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data as Raw power incomer, 2 nos 800 A 4p ,36 ka motorised MCCB with adjustable Microprocessor based Release with Ics=100% Icu as buscoupler and dg incomer,3nos 630 A 36ka 4p mccb with adjustable Microprocessor based Release with Ics=100% Icu for chiller , 4 nos 125 A ,25 Ka 4p mccb,Ics = 100% Icu, 25 KA breaking capacity, adjustableThermal,fixed magnetic type for pumps outdoor HVAC Sub panel 2mm thick hot dip galvanised sheet ,,1600A copper busbar , Surge protective device 3p+N 40KA type-ii, Indicators for ON,off ,trip ,MFM indication ,provision for earthing ,hinges, and other accessories , hinged door must be painted with powder coated in complete as per the direction of Engineer in charge.(make of ACB--Schneider(MASTERPACT )/Siemens(3WT)/Legrand(DMX SP),make pf MCCB-Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS Make of MCB/SPD-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
1
-
-
SITC of workstation with i7 12 th gen ,á 1tb HDD,256 gb SSD,16 gb ram,4 gb nvidia graphics card ,with 32 inch 4k display genuine windows, inbuilt ms office ,autocad software in complete as per the direcion of engineer incharge. (Make: Lenovo(p360)/hp)
1
-
-
Three (3) - Lift Panels to be installed in respective lift rooms, each comprising of One (1) Incomer - 100 Amp, 25 KA, MCCB ,Ics = 100% Icu, 25 KA breaking capacity, adjustableThermal,fixed magnetic type with QR code with 3 Nos Phase indicating lamps with control fuse/ MCB with MFM(A+V+F) and selector switch & 3p+N 40KA type-ii. Busbar - 100 Amp cu busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply , One (1) - Outgoing Feeder with 63 Amp 4P 10KA MCB,C SERIES (for lift Panel supply), Three (3) - Outgoing feeder each comprising with 25A,DP,10KA MCB C SERIES (for ARD battery charger,Liftwell lighting & one nos spare)
3
-
-
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB C SERIES as outgoing Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials
1
-
-
LIFT:-Supply,Installation, Testing & Commissioning of of 20(Twenty) Passenger gearless with Machine room Capacity(1360 Kg),Elevator B+G+5 Floors with ACVVVF drive/Control for constant load of1360 kg ARD 1.25 MPS with simplex Collective Selective Control without attendant car position indicators,2 hrs fire rated door, battery operated alarm bell & emegency light,woodpecker interior with white granite flooring car interior, centre opening automatic sliding stainless steel Silver Sky finish doors for car entrance & hoist way entrance etc as specified in the technical specification of DTCN including all steel,civil electrical materials as specified eg. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting etc. Hoist way wiring and other associated wiring including Fireman's switch complete in all respect as per direction of Engineer in charge.The Elevator should be suitable for physically handicapped person. (Make:- OTIS/ kone/Mitshubishi)
2
-
-
Supply,Installation, Testing & Commissioning of of 8(Eight) Passenger gearless with Machine room Capacity(544Kg),Elevator B+G+5 Floors with ACVVVF drive/Control for constant load of 544 kg ARD 1.25 MPS with simplex Collective Selective Control without attendant car position indicators,,2 hrs fire rated door,battery operated alarm bell & emegency light,woodpecker interior with white granite flooring car interior, centre opening automatic sliding stainless steel Silver Sky finish doors for car entrance & hoist way entrance etc as specified in the technical specification of DTCN including all steel,civil electrical materials as specified eg. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting etc. Hoist way wiring and other associated wiring including Fireman's switch complete in all respect as per direction of Engineer in charge.The Elevator should be suitable for physically handicapped person. (Make:- OTIS/ kone/Mitshubishi)
1
-
-
CABLING AND END TERMINATION MAIN AREA:- Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex/RR Kabel/Gloster ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 3.5core x 400 sq mm
400
-
-
3.5core x 300 sq mm
60
-
-
4core x 10 sq mm
70
-
-
4core x 16 sq mm
210
-
-
4 core x 4 sq mm
121
-
-
3.5core x 70 sq mm
260
-
-
3.5core x 150 sq mm
210
-
-
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property Cu. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex/ /RR Kabel/Gloster ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 4CX 16 SQMM
50
-
-
Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
345
-
-
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface as required.
200
-
-
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
250
-
-
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required.
270
-
-
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x400 sq mm
24
-
-
3.5 core x150sq mm
16
-
-
3.5 core x70 sq mm
16
-
-
4 core x16sq mm
24
-
-
4core x 10 sq mm
20
-
-
4core x 4 sq mm
24
-
-
DG SET:-Supplying, Installation, Testing and Commissioning of CPCB-IV+ Diesel Generating Set having prime power rating of 250 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure complete in all respect and comprising of following and as per specification enclosed, suitable for outdoor installation with foundation as per approved drawing .make: Jackson/Kirloskar/Perkins.A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 250 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, outgoing terminals taken out for connecting to cable along with all accessories.B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of 450 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required. C. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required.D. Syn. Panel: Synchronisation Panel including auto start,auto stop,auto load sharing,auto load management suitable for 250 KVA DG Set fabricated with 2.0 mm thickness CRCA Sheet duly Powder coated after Seven tank process and provided with Contactors as required along with Logic Controllers Relays including Aux. Relays, time delay relays, auto/manual selector Switch, ON/OFF Push Button, battery Charger. multi functional meter with RS Port, necessary instruments & indicating lamps suitable busduct termination/cable.Current rating breaker .E. Acoustic Enclosur: The acoustic enclosure is made of 14/16 gauge CRCA sheet. The salient features of acoustic enclosure are:- The enclosure is of modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour.a)The Sheet metal components are Nine Tank pre treated before powder coating.b)The door are gasketed with high quality EPDM gaskets to prevent leakage of sound as well as door handles are lockable type. c) Specially designed attenuators to control sound at air entry and exit points.d) Adequate ventilation to meet total air requirements. e) Temprature of enclosure should not exceed beyond 5-7°C of ambient temperature.f) There is a provision of emegency shut down from outside the enclouser.g) Noise level; 75 DB (A) at 1 mtr Distance.h).Microprocesser based DG set Monitoring,metering and control system with protection for Diesel Engine / Alternator and Automatic operation of DG set in case of mains failure.DG set as above(including CCIG approval)i) Providing and installation of exhaust pipe upto the roof level (height 15 mtr approx) along with building MS Supports & all arrangments as required.j)DG to Syn. Panel through Bus tranking.DG set as above(including CCOE approval) .Supply of Hand pump to pump the HSD fuel from barrels to the day tank with flexible hose pipes etc., 2 set
1
-
-
Supply, installation, testing & commissioning of two no.1*60KVA 3 phase PRS UPS System with inbuilt isolation transformer in parallel redundant configuration with SMF Battery for 30 minutes back up along with all accessories. The UPS should be IGBT based with 0.9 output power factor. Input voltage range 290 to 498VAC. With inbuilt static and maintenance bypass switch Overload on static Bypass - 14 times for 10 milli sec and 10 times for 100 milli sec. Transient Voltage Surge Suppressor - 160KA, 3 phase TVSS having all ten Mode Protection (L-L / L-G / L-N / N-G), response time 0.5 nano sec., EMI/ RFI attenuation: 40 dB Certification - Listed with UL1449 should be provided with each UPS. TVSS should be of same make as UPS. UPS should have inbuilt switch gear for input, output, Maintenance bypass, auto static bypass & Battery. UPS should have Self-capacity test feature – UPS should have the provision to test run in its full capacity without external load. INCLUDING 38 nos 100 ah smf battery ,rack and interlinks included . Make: vertiv/gutur /APC/Numeric/ABB
1
-
-
Supply of 8 mm Aluminum Round Conductor.
Tested as per IEC 62561. as per direction of engineer in charge make: OBO/DEHN
820
-
-
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in chargemake: OBO/DEHN
810
-
-
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561.make: OBO/DEHN
120
-
-
Providing of cross universal connector: for T and cross connection to route Vertical down conductor/mesh formation made of hot dipped galvaniseh iron with necessery screws etc as required.Installation with 4 hexagonal bolts M8*25 with M8 hexagonal nuts.make: OBO/DEHN
15
-
-
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).make: OBO/DEHN
15
-
-
Supply of Providing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current in complete as per the direction of Engineer in charge.
Make-OBO/Dehn Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 made of Aluminium. Tested as per IEC 62561. (2nos/expansion piece ). Make-OBO/Dehn
22
-
-
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current.make: OBO/DEHN
12
-
-
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. OBO Type No. 101 VL 3000 (5401983)/Dehn.Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . OBO type No.F-FIX-16 (5403200)/Dehn.Support stone for Fang Fix system 16 kg made up of frost resistant concrete in complete as per the direction of Engineer in charge.
Make-OBO/Dehn
6
-
-
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 4 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. OBO Type No. 101 VL 3000 (5401983).Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . OBO type No.F-FIX-16 (5403200).Support stone for Fang Fix system 16 kg made up of frost resistant concrete in complete as per the direction of Engineer in charge.
Make-OBO/Dehn
10
-
-
Supply of Test Joint (Folding Clamp) made of Stainless Steel -SS 304 suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer Tested for 100kA lightning current in complete as per the direction of Engineer in charge.
Make-OBO/Dehn Thermoplastic T 60 Junction Box 100x100x48mm made of Poly Proylene ,Flame Resistance upto 650Dec Centigrade.
15
-
-
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561.make: OBO/DEHN
458
-
-
Supply for Providing of Cross connector for Flat: Suitable for 30mm
Galvanised steel strip. Installed with 4 nos of hexagonal plate.
Tested for 100kA lightning current.make: OBO/DEHN
38
-
-
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561.make: OBO/DEHN
38
-
-
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm
thick. Width 50mm. Made of petrolatum- coated chemical fibre
fabric.make: OBO/DEHN
3
-
-
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 in complete as per the direction of Engineer in charge.
Make-OBO/Dehn
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn
Earth conductivity enhancing mineral compound shall be of 50 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn.
15
-
-
Supply of M10X50 SS Screw and Grip.make: OBO/DEHN
1350
-
-
Installation of The above arrangements make: OBO/DEHN
1
-
-
Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
7146
-
-
Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit I/O Single
100
-
-
Supply and installation of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Tyco / Legrand / Panduit
12
-
-
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit. 1mtr Lenghth
500
-
-
2mtrs Length
20
-
-
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Cisco/HP
12
-
-
Supply and Installation of 24 Port Gigabit L3 managed with 4 SFP ports. . Make: Grandstream/Netgear/Digisol
1
-
-
Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/Digisol/Netgear
4
-
-
Supply and installation of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/Digisol/Netgear
14
-
-
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
350
-
-
Supply and installation of 24 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 24 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss.Make: Tyco / Legrand / Digisol
1
-
-
Supply and installation of 6 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 6 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand / Digisol
11
-
-
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db. Make: Tyco / Legrand / Digisol
18
-
-
Supply and installation of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW
11
-
-
SITC of 42U 600/1000D UL Listed Floor mount Rack with Front glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make: Valrack/Rittal/ APW
1
-
-
Supply and installation of Next Generation Firewall support minimum 300usres with min 27Gbps of IPv4 firewall throughput for 1518 Bytes UDP packet, with 3years subscription licence (IPS, Advanced Malware Protection, Application Control, Web & Video Filtering, Antispam Service, and 24x7 Support). Make: Gajshield/Paloalto/Sonicwall
1
-
-
INTERCOM -Supply and laying of 2pair telephone cable
500
-
-
Supply and laying of 20 Pair Telephone Cable
100
-
-
Supply & Fixing of Matrix Digital Hybrid EPABX System initially equipped with 4 analog(with trunk protection unit) trunk and 116 analog extensions. The system should have future expandability up to 240 ports without adding any external CPU or expansion cabinet. The EPABX system should have capability to connect with GSM, PRI, VOIP, E&M, CO, DKP etc without adding any external gateway or converter device.
1
-
-
Supply & Fixing of MDF Box 100 Pair
1
-
-
Supply & Fixing of MDF Box 50 Pair
1
-
-
Supply & Fixing of Krone Module
10
-
-
Supply & Fixing of Beetle Basic Phone C11
30
-
-
IP CCTV Surveillance System:Suppy and installation of 5 megapixel base Dome camera support video compression H.26+/H.265(HEVC)/H.264+/H.264/MJPEG, built-in intelligent analytics-region Entran, Region Exiting, Advance Motion Detection, Tamper Detection, Line Crossing, Loitering, Object left, Object removed. People counting-Count the number of people entering or exiting, up to 4 detection areas for regional people counting. Built-in Microphone. IP67 and IK10 compliant 120dB super WDR, IR Distance of upto 50mtr Make- Honeywell 20 series/pelco/axis/bosch
40
-
-
SITC of 64Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade. Make- Honeywell 20 series/pelco/axis/bosch
1
-
-
SITC of 8TB Surveillence Hardisk. Make: Segate/WD
8
-
-
Supply and Installation of 55" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung/ LG /SONY
1
-
-
PUMPS AND APPURTENANCES:-Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge (Make:PUMP:KBL/ Grundfos / KSB/ Wilo)
2
-
-
Supply , installation, testing & commissioning of Diesel Engine driven end suction Back pullout type Centrifugal pump having 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal and suitable diesel engine complying to TAC norms along with all accessories including control wiring between panel & DG set and fuel storage tank including providing base frame coupling,coupling guard as per direction of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo)
1
-
-
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal Jocky pump delivering 180 LPM at 70Mtr head with CI casing bronze impeller , SS shaft with mechanical seal and 2 pole TEFC electric motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply including providing base frame coupling,coupling guaaard as per direction of Engineer-in-charge.(Make:Kirlosker/ Gunfoss / KSB/ wilo)
2
-
-
Fire Pump Panel-:Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 630 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 400 Amp 36 KA TP with solid neutral SDFU Voltmeter with s/s, Ammeter with S/s, 3 Nos 400/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB,OUTGOING: a)Three(3)-250 Amp TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S
c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.Make of switchgear-Schneider/Siemens/Legrand
1
-
-
Supply & Laying of copper armoured cable of following size.Make-Havels/Polycab/Finolex/RR Kabel/Gloster.12Cx2.5 sqmm
24
-
-
2Cx1.5 sq mm
67
-
-
PIPE & VALVES ETC:-Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.Make-Tata/Jindal/Sail. 200mm NB
18
-
-
150mm NB
388
-
-
100mm NB
400
-
-
80mm NB
280
-
-
65mm NB
350
-
-
50mm NB
400
-
-
40mm NB
420
-
-
32mm NB
375
-
-
25mm NB
550
-
-
Supply,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size including laying in ground after excavation and refilling of trench along with providing 4mm thick pipecoat for underground pipe after applying wrapping coating primer as required as per direction of Engineer-in- charge.Make-Tata/Jindal/Sail.a)150mm NB
220
-
-
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-Audco/Zoloto/Kirloskar/Leader.200mm NB
2
-
-
150mm NB
12
-
-
100mm NB
10
-
-
80mm NB
9
-
-
65 mm NB
9
-
-
50 mm NB
10
-
-
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Audco/Zoloto/Kirloskar/Leader.150mm NB
5
-
-
100mm NB
4
-
-
Supply,Installation,Testing & Commissioning of orifice plate made of 6mm thick stainless steel with orifice of required size in between flane and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/ sq cm complete as required.
20
-
-
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge. Make-H guru/G guru.
6
-
-
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge. Make-Indfos/Grandfos.
5
-
-
Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Deepak/Zoloto/Kirloskar/Leader.200mm NB
2
-
-
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required as per direction of Engineer-in-charge.
2
-
-
Supply,Installation,Testing & Commissioning of 150 NB C.I. PRV with matching flanges as per direction of Engineer-in-charge.
1
-
-
Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge. Make-Newage/Fireshield/HD.
1
-
-
WET RISER CUM DOWN COMER SYSTEM:-Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge. Make-Newage/Safex/Omex/Minimax.
20
-
-
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge. Make-Newage/Safex/Omex/Minimax.
20
-
-
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.Make-Newage/Safex/Omex/Minimax.
40
-
-
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.
20
-
-
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.Make-Newage/Safex/Omex/Minimax.
15
-
-
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
2
-
-
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Newage/Safex/Omex/Minimax.
2
-
-
SPRINKLER SYSTEM:-Supply,Installation,Testing & Commissioning of Pendent type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge. Make-HD/Tyco/Newage.
470
-
-
Supply,Installation,Testing & Commissioning of Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge. Make-HD/Tyco/Newage.
430
-
-
Supply,Installation,Testing & Commissioning of Cast Iron Ball Valve of 15 mm size with teflon seals, Stainless steel Ball & Stem, MS Lever with PVC Coating As Per IS: 9890 ISI Marked. Make-/Zoloto/Kirloskar/Leader.
11
-
-
a)25 mm size
23
-
-
Providing & fixing of Water Flow Switch switable for pipe 100 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.Make-Honeywell system sensor.
9
-
-
Providing & fixing of 25 mm size Gunmetal Pressure Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge.
2
-
-
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge.Make-HD/Tyco/Newage.
380
-
-
EXTINGUISHER SYSTEM:-Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. Make-Safex/Minimax/Fireshield/Minimax.
30
-
-
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete. Make-Safex/Minimax/Fireshield.
36
-
-
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.Make-Safex/Minimax/Fireshield.
5
-
-
AUTOMATIC FIRE ALARMING SYSTEM:-Supplying installation testing and commissioning of Microprocessor based Addressable Fire Alarm Control Panel 4 loop suitable for serving the followingg detectors & Devices in maximum with LCD display, complete withb) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire with provision for interface along PA Controller including call station in built suitable for 240 watt amplifier as per direction of Engineer-incharge.Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
1
-
-
Supply, Installation, Testing & commissioning of Analog Addressable smoke cum heat detector or heat detector sensor with status indicator with inbuilt isolator module . Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
250
-
-
Supply, Installation, Testing & commissioning of Addressable Manual Call Point soft addressable type with in built fault isolator as required. Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
14
-
-
Supply, Installation, Testing & commissioning of Response Indicator complete as required.Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
50
-
-
Supply, Installation, Testing & commissioning ofAddressable Loop Powered Hooter cum Strobe (sound output of minimum 90db) cum strobe (strength of light 10cd) complete with inbuilt isolator as required. Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
14
-
-
Supply & Fixing of 2 core 1.5 sq.mm, multi strand, copper conductor, FRLS (Fire Retardent Low Smoke)-PVC insulated GI Screened Armoured cable with saddle and required accessories.& Power Cable. Make-Polycab/Havels/RR cable.
2800
-
-
Supply ,Installation ,Testing & Commissioning of Output Control Relay Module.Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens
2
-
-
Supplying, installation, testing and commissioning of Addressable Beam(Infrared) Detector including Transmitter & Receiver, complete with base and isolator as per direction of Engineer-in-charge.(Make:Bosch/ Honeywell Morley/ Edward/ Notifier/ Siemens)
1
-
-
SIGNAGES:-Providing and installing in position the following type of sign boards made out of 3mm thick flexyle photoluminescent based glow in dark sheeting with luminous properties enclosed in a weather proof Uvstabilized film with UV screen printing by imported links pasted over3 mm thick cast acrylic from front side with 6 mm thick acrylic, -20 to+80 deg C, Suitablefor indoor use, greenish yellow, glow visible upto 4-6 hr in total darkness.Make-Prolite/Bajaj or Equivalent
9500
-
-
Public Address System:- Supplying, installing, testing and commissioning of 12 Watt wall/celling mounted speaker completed as required.Make-Honeywell/Bose/Bosch.
28
-
-
Supplying, installing, testing and commissioning of Power mixture amplifier of 480 watt.The amplifier should be clean reliable audio for public address amplification.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Honeywell/Bose/Bosch.
1
-
-
Supplying, installing, testing and commissioning of 2 Core x 1 Sq.mm Twisted Pair PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. Make-Polycab/Havels/RR cable.
1600
-
-
Supplying, installing, testing and commissioning approved make 20 mm dia.PVS FRLS flexible conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Polycab/AKG/Precision.
1400
-
-
Supplying, installing, testing and commissioning 8 zone voice alarm controller with USB mp3 am/fm player included 8 zone button paging station and microphone.Make-Honeywell/Bose/Bosch.
1
-
-
Supplying and fixing of 12U Rack for amplfier.
1
-
-
LIFT LOBBY VENTILATION / PRESSURIZATION SYSTEMS:VENTILATION Main Control panel.with dol /star delta starter with integratiopn with fire control relay module , Fabricating & Supply, installing, testing and commissioning of compartmentalised common control panel for LIFT LOBBY VENTILATION / PRESSURIZATION, Start/Stop main panels , with Auto /Manual selector switch , intrigating with CO2 sensors and Fire Alarm control panel for opraction. Before ordering the Design and GA drawing will be submitted for approval and after due approval by the engineer in charge order will be placed.
3
-
-
lift well pressurisation fan fire rated Supply, Installation, Testing and Commissioning of Axial flow fans For Air pressure complete with GSS casing , aluminium alloy impellers, directly driven by TEFC induction motor suitable cfm and kW at 415±10 % V,50 Hz, 3 Phase supporting frame,louvers, weld mesh inlet guard, TP isolator with MS enclosure box as required. Before ordering the Design and calculation of FAN CFM and TSP will be submitted and GA drawing will be submitted for approval and after due approval by the engineer in charge order will be placed.23000 cfm approx.Make: Kruger/nicotra /airflow/systemair
3
-
-
HVAC SYSTEM-: Supply, Installation, Testing and Commissioning of air cooled Chiller Water IN - ( 12 º C), Chiller Water OUT - (7º C), FLOW - 580USGPM (max), Fouling Factor 0.0180 m2k/kw, Pressure Drop Max - 6.0 Meter, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50Hz, A.C. supply. (for open type compressor motor, H.P. shall be at least 10% higher than the compressor BHP requirement at full load), Unit mounted starter panel with IP-55 Protection housing with VFD starter for the compressors, Under/over voltage protection, single phase preventers, fuses, & microprocessor based controls. Building control unit & communication card for interfacing with BMS shall be included. -
2
-
-
BACNET, Necessary drive arrangement, The condenser coils shall be made of seamless copper tubes, coating on condensor for industrial polluted area internally grooved type arranged in staggered rows and are mechanically expanded into super slit aluminium fins, metallurgically brazed as one piece to enhance aluminium 1 No. - Matching shell & tube flooded type chiller ,. 1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve. 1 Set - Microprocessor based control panel complete with accessories as per specifications. Lot- Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. Lot - Water flow switches at inlet and outlet of chiller, water drain & air purge valves wherever required. Lot- Suction line and chiller insulation with minimum 32mm thick or more polyvinyl nitrile rubber insulation finished with 0.63mm thick G.S.S. cladding complete as required. Lot - Initial / first charge of refrigerant gas & compressor oil, vibration pad , COP of the chillers shall be 3.0(min)and IPLV shall be 4.2(minimum) at 100% load @ AHRI conditions.Maximum IKW shall be 1.4 at design condition (including condenser fan power consumption) 5 star BEE Chiller Capacity 200TR Actual Capacity AT 43 DEG C AMBIENT TEMP. with - 2 Working (Make:- Carrier/Trane/york)
-
-
-
WATER PUMPS PRIMERY Supply, installation, testing & commissioning of pumps for outdoor duty application consisting of:- a) Pump and motor(suitable for outdoor and continuous operation), b) Mounting frame & vibration isolators, c) Earthing of motor (IP-52) & frame, d) Lifting & mounting of the pumps at locations as shown in drgs, e) All accessories like Vibration isolators ,Flexibles,required wells for temeprature/pressure sensors for BMS connectivity, eccentric reducers and expanders etc., f) Insulation of the pumps and accessories as per the given specifications, g ) including insulation and cladding, h) Vendor to study the site condition and the cost should include all the transportation cost , loading unloading cost, shifting the equipment to Plant room etc.,Chilled water pumps:- Chilled Water Primary Pumps for air cooled chiller Centrifugal End suction pumps with insulation USGPM. 580 GPM @ 25 m head (2Working ), 1 stand by Min Efficency 70 % , Casing Cast Iron , Impeller Bronze , Seal _ mechnical , Max RPM - 1450 , Motor Type - Squirrel Cage Induction , Duty , Continious .At the time of odering pump head calculation shall be submitted by the bidder if any increase in head, no additional cost will be paid by the agency. (Make - Xylum / Grundfos/ Armstrong)
3
-
-
AIR HANDLING UNIT - 2 Stage Filtration- with VFD -Supply, Installation, testing and commissioning of factory fabricated double skin type Air Handling Units (BMS compatible) Floor Mounted Units for High Precision Zones as per specifications given below:-AHU Construction:- It shall be made out of min.0.6 mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain stainless steel sheet inside with 50 mm thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 38 kg/Cum between them. Drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile. Necessary foundation required & anti vibration pads shall be provided & cost for the same shall be included in this item. Supply Air Stream:- 1) Filter section consisting of pre filter and microvee/fine filter . Pre-filter section shall be with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine/microvee filter section will be with filters of non woven synthetic media of 3 micron particle size of efficiency 99%.2) BACKWARD CURVED PLUG/Centrifugal fans (with min. 70% efficiency) with blower motor, drive and flexible duct connection.
2
-
-
The supply fan shall be provided with variable frequency drive and input / output signal compatible to BMS system.3) 6 row deep cooling coil 4) No Heating Coil Required 5) 50 mm Thick Puf Panel with Inner and outer Sheet of .6 mm thick both Side 6) Mixing Box comprising of damper & filter section.COIL- Copper tubes and Aluminium fins 12-13 fin./inch, Coil size shall be selected for air velocity of 500 ft/minute 12deg Celcius coil leaving temp & velocity across filters at 500 ft/minute. Motors shall be suitable for 415 ± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(IE 3). Vibration isolation shall be as per specifications and as shown on the drawings. VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad & display) , IP-54 enclosure for use on standard BACKWARD CURVED PLUG/Centrifugal fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. IP 20 Rated VFD to be placed inside the Stater Panel with IP 55 enclosure. Each VFD panel to be provided with digital display showing electrical parameters like voltage,current and power consumption.Sound level 72 db at the distance of 2 mtr.(maximum)Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high efficiency (IE-3 Efficiency), H.P of motor and coil shall be as per actual selection meeting other technical requirements. At the time of odering ahu total pressure loss as per friction method and ahu coil selection should be submitted for approval.INTAKE AIR DBT/RH-25.5 Deg. Cel./59%, Discharge air DBT/RH-12/96%. if any increase in head, no additional cost will be paid by the agency.23000 CFM /50 TR / 6 RD CC / 86 mm SP with Pre & Fine Filter (Make:- VTS/ Trane/Systemair)
-
-
-
15000 CFM / 35 TR / 6 RD CC / 65 mm SP
2
-
-
SITC of 3 way Motorized Valve: 50 mm Dia, Make-Honeywell/Siemens/,Belimo
2
-
-
17000 CFM / 40 TR / 6 RD CC / 65 mm SP
1
-
-
SITC of 3 way Motorized Valve: 50 mm Dia, Make-Honeywell/Siemens/,Belimo
1
-
-
8500 CFM / 20 TR / 6 RD CC / 65 mm SP
1
-
-
SITC of 3 Way Motorized Control Valve: 40 mm Dia, Make-Honeywell/Siemens/,Belimo
1
-
-
6500 CFM / 16 TR / 6 RD CC / 65 mm SP
1
-
-
SITC of 3 Way Motorized Control Valve: 40 mm Dia,. Make-Honeywell/Siemens/,Belimo
1
-
-
Supply, Installation, Testing and Commissioning of Thermostat - Digital Type as required in complete as per direction of Engineer in charge. (Siemens RDU 340/Honeywell)
7
-
-
Supply, Installation, Testing and Commissioning of CPRI approved 2mm CRCA Starter panel with vfd and dol as bypass provision for BMS,MPCB,OLR fire damper as required in complete as per direction of Engineer in charge.make: Siemens/Schneider
7
-
-
Supply, Installation, Testing and Commissioning of VFD as per AHU motor calculation next higher capacity continuous duty ,BMS RJ45 compatible with Panel as required in complete as per direction of Engineer in charge.make: schneider/abb/siemens/delta/LK(L&T)
7
-
-
Supply, Installation, Testing and Commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled/ hot water circulation including insulation as specified. Make - Honeywell , Audco . KITZ, Belimo - 150 mm Dia
3
-
-
Y Strainer - 80 mm Dia
4
-
-
Y Strainer - 65 mm Dia
3
-
-
Y Strainer - 50 mm Dia
2
-
-
Supply, Installation, Testing and Commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as required in complete as per direction of Engineer in charge. Make - Honeywell , Audco . KITZ, Belimo .150 mm Butterfly Valve
10
-
-
Butterfly Valve - 80 mm Dia
4
-
-
Butterfly Valve - 65 mm Dia
8
-
-
Butterfly Valve - 50 mm Dia
2
-
-
Supplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC, and upto 20 mA electric signal and providing similar transduced feedback output to control system as required in complete as per direction of Engineer in charge. (Make - Belimo , Siemens , Honey Well , Kitz ) 150 mm Motorized Valve
2
-
-
Balancing valves with built in measuring facility
with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as required in complete as per direction of Engineer in charge. Make - Honeywell , Audco . KITZ, Belimo .150 mm Dia
2
-
-
Balancing Valve - 80 MM Dia
2
-
-
Balancing Valve - 65 MM Dia
3
-
-
Balancing Valve - 50 MM Dia
2
-
-
Supply, Installation, Testing and Commissioning of Temperature Gauge as required in complete as per direction of Engineer in charge.
24
-
-
Supply, Installation, Testing and Commissioning of Pressure Gauge as required in complete as per direction of Engineer in charge.
24
-
-
Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. PICV Valve: 65 mm Dia
2
-
-
SITC of the FCU Unit with 3 RD & 3 Speed with SS Extended Drain Tray sandwich with Insulation . The Unit Shall be compatible with Three Way control valve & Thermostat suitable for making the System Funcational Capacity of Unit . The Unit Shall be Silent Type of 3 TR. (Make-VTS/Trane)
7
-
-
1.5 TR
1
-
-
2.0 TR
13
-
-
2.5 TR
3
-
-
SITC of Ball Valve with/ without Strainer PN 16 rating Brass /Bronze 32 mm Dia
10
-
-
25 mm Dia
14
-
-
SITC OF 3 Way on/off control valve with actuator & Digital Display of thermostat. 32 mm Dia Make-Honeywell/Siemens/,Belimo
24
-
-
25 mm Dia Make-Honeywell/Siemens/,Belimo
14
-
-
Supply & Laying of Control Wiring with 2 Core 1.5 Sqmm Felexible wire. Make-Finolex/Polycab
100
-
-
Chilled Water Piping. Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystyrene moulded pipe section of density 20 kg/cum after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessian and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip (as per IS:1322 as amended up to date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
Note: The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 150 NB(32 mm Thick Insulation)make: TATA/SAIL/JIndal
110
-
-
250 NB
2
-
-
200 NB
2
-
-
125 NB
80
-
-
100 NB
100
-
-
80 NB
150
-
-
65 NB
50
-
-
50 NB
40
-
-
40 NB
80
-
-
32 NB
90
-
-
25 NB
80
-
-
Supply, erection, testing & commissioning of UPVC condensate Drain Piping complete with fittings, supports and all accessories alongwith 9mm thick Nitrile Rubber insulation. Pipes shall conform to ASTM D1785 Sch 40 and fittings shall be of Sch 80 conforming to ASTM D2467. The insulation material shall be Closed cell rubber. 50 NB
45
-
-
40 NB
100
-
-
Supply & Installation of Make up Tank: HDPE/ PVC Tank with insulaton- 1000 Ltrs with structure as required in complete as per direction of Engineer in charge..
1
-
-
Supply, Installation, Testing and Commissioning of Auto Air Vent Valves as required in complete as per direction of Engineer in charge. 25 NB
10
-
-
Supply, Installation, Testing and Commissioning of Flexible Connector / Rubber Below (with Flanged ends) as required in complete as per direction of Engineer in charge. 150 NB
12
-
-
Supply, erection, testing & commissioning of Water line Flow Switch as required in complete as per direction of Engineer in charge.
2
-
-
Pressure/Temperature Test Point
13
-
-
Supply, installation, balancing and commissioning of GSS sheet ,120 GSM metal rectangular/round spiral ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, supports etc. duly hanged/ suspended by Supporting arrangement as per approved drawings and specifications of following sheet thickness complete as required in complete as per direction of Engineer in charge. 24 G Make-TATA/Jindal/Sail
1000
-
-
22 G
700
-
-
20 G
100
-
-
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as required in complete as per direction of Engineer in charge.. 25 mm thick Make-A-FLEX/K-FLEX/Armacell
1800
-
-
SITC of Return air Diffuser with out VCD as required in complete as per direction of Engineer in charge. Make-Systemair/Glenstorm/Airflow
19
-
-
SITC of Linear Grill for Supply Air along with VCD as required in complete as per direction of Engineer in charge.. Make-Systemair/Glenstorm/Airflow
6
-
-
SITC of Linear Grill for Return Air along without VCD as required in complete as per direction of Engineer in charge.. Make-Systemair/Glenstorm/Airflow
8
-
-
SITC of Motorized Fire Damper as required in complete as per direction of Engineer in charge..Make-Systemair/Glenstorm/Airflow
4
-
-
Supply, Installation, Testing and Commissioning of Actuator - 10 Nm as required in complete as per direction of Engineer in charge.Make-Systemair/Glenstorm/Airflow
7
-
-
Supply, Installation, Testing and Commissioning of Freash Air Damper as required in complete as per direction of Engineer in charge.Make-Systemair/Glenstorm/Airflow
4
-
-
Supply, Installation, Testing and Commissioning of Canvass Connection as required in complete as per direction of Engineer in charge.
7
-
-
Supply and fixing of Sound Attenuator
2
-
-
Volume Control Dampers for Supply Air Collars:- Supply and Installation of Black MS Box- Type Volume Control Dampers for Collar.-Make-Systemair/Glenstorm/Airflow
2
-
-
Toilet Ventilation:- Supply, erection, testing & commissioning of Inline fan for Toilet Exhaust. Scope to provide incoming power to this fans is not included in this item. 1000 CFM @ 10 mm Static Pressure (Make:- Kruger/Nictora/Systemair)
12
-
-
P.H. WORK
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge In ground floor
20mm dia C-PVC Pipes
20
-
-
25mm dia C-PVC Pipes
120
-
-
40mm dia C-PVC Pipes
60
-
-
In 1st floor
20mm dia C-PVC Pipes
25
-
-
25mm dia C-PVC Pipes
105
-
-
In 2nd floor
20mm dia C-PVC Pipes
25
-
-
25mm dia C-PVC Pipes
54
-
-
40mm dia C-PVC Pipes
24
-
-
In 3rd floor
20mm dia C-PVC Pipes
25
-
-
25mm dia C-PVC Pipes
30
-
-
40mm dia C-PVC Pipes
36
-
-
In 4th floor
20mm dia C-PVC Pipes
25
-
-
25mm dia C-PVC Pipes
30
-
-
40mm dia C-PVC Pipes
36
-
-
In 5th floor
20mm dia C-PVC Pipes
20
-
-
25mm dia C-PVC Pipes
30
-
-
40mm dia C-PVC Pipes
48
-
-
50mm dia C-PVC Pipes
72
-
-
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall In Ground Floor
12
-
-
250mm thick wall In 1st floor
15
-
-
250mm thick wall In 2nd floor
15
-
-
250mm thick wall In 3rd floor
15
-
-
250mm thick wall In 4th floor
15
-
-
250mm thick wall In 5th floor
12
-
-
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. In Ground Floor
22
-
-
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In ground floor
42
-
-
In 1st floor
45
-
-
In 2nd Floor
45
-
-
In 3rd floor
45
-
-
In 4th Floor
45
-
-
In 5th floor
36
-
-
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.
15mm dia CP two way bib cock(CON-CHR-041KN)
48
-
-
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
4
-
-
15 mm dia CP L.B. Bib cock(CON-CHR-107KN)
27
-
-
15mm dia CP angle stop cock(CON-CHR-053KN)
152
-
-
20mm dia CP Con. stop cock (CON-CHR-089KN)
12
-
-
15mm dia CP flange
243
-
-
15mm Cp extention piece
243
-
-
25mm brass full way valve
17
-
-
40mm brass full way valve
14
-
-
50mm brass full way valve
6
-
-
125mmdia C.P.grating
130
-
-
Over Head Shower 100mm dia round (OHS-1999)
2
-
-
Shower Arm (SHA-CHR-477)
2
-
-
15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
48
-
-
600mm X 125mm C.P glass shelf (ACN -CHR-1171N)
15
-
-
CP towel rail (25 mm)(ACN-CHR-1111N)
32
-
-
C.P towel ring(ACN-CHR-1121NM)
21
-
-
CP Soap dish Holder (ACN-CHR-1131N)
73
-
-
15mm dia C.P Pillar cock(CON-CHR-021KN)
66
-
-
Grab Bar Left 90˚ Angle white(Cera)No.82210104
12
-
-
Grab Bar 692mm long white(Cera)No.82210106
6
-
-
Grab Bar Vertical swing white(Cera)No.82210107.
6
-
-
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
10 litres capacity pvc low level cistern (Slimline-white)
43
-
-
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
(a)Aquagurd Pure Chill 120 PSS UV
6
-
-
Construction of 50,000 Ltr OH Tank (In 6th Floor)
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
30.59
-
-
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. ( Coefficient RCC Qnty x 1.00 Qntl / Cum)
30.59
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete RCC floor roof, chajja etc
92.6
-
-
RCC Beam, Column, wall etc
158.95
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
Same as Centering Shuttering
158.95
-
-
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
94.12
-
-
Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
49.7
-
-
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
150
-
-
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
2
-
-
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
-
-
Supplying all materials, labour, T&P and fitting and fixing Cast Iron hubless soil waste ventilating pipes and fittings conforming to IS: 15905 or its latest revision to walls with suitable wall clamps or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 100mm dia CI Hubless pipe
644
-
-
100mm dia CI door cross Tee
12
-
-
100mm dia CI door Tee
58
-
-
100mm dia CI plain Tee
116
-
-
100mm dia CI door bend
30
-
-
100mm dia CI plain bend
88
-
-
100mm dia CI offset without ear
15
-
-
100mm dia CI 'P' trap
44
-
-
100mm dia CI cowl
20
-
-
100mm dia GI clamp/Coupler
232
-
-
CI or M S bracket 1'
240
-
-
CI or M S bracket 2'
240
-
-
75mm dia CI Hub less
60
-
-
75mm dia CI Plain bend
42
-
-
100mm dia shieldede S/S coupling with EPDM rubber including nut bolt
214
-
-
75mm dia shieldede S/S coupling with EPDM rubber including nut bolt
20
-
-
WC Connector long
48
-
-
MS Clamp
1
-
-
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
250mm to 375mm thick wall
80
-
-
Supplying all materials, labour, T&P and cutting hole in R.C.C roofs,cornice, etc for passing H.C.I Pipes /U.P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
12
-
-
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge
580mm size Orissa pan (Parryware/Cera/ Nycer Make)
4
-
-
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
a.European water closet with ‘S’ trap plain (Parrywere/Hindware/Nicer Make)
40
-
-
Cascade dual flushset (Hindware)No.92099
8
-
-
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
Squatting urinal (Parryware make)
10
-
-
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar) URS-WHT-13261
29
-
-
15mm CP spreader
29
-
-
32mm CP doom waste
29
-
-
Supplying all materials, labour, T&P and providing porcelain urinal partition wall including cutting grooves in wall and making good the damages, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
HT URINAL PARTITION WTH RD EDGES (JSE-CHR-110US450X)
18
-
-
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge
550mmx400mm size wash hand basin (Parryware/Cera/ Nycer Make)
8
-
-
Por. Pedestall
8
-
-
Half Pedestal Basin (91049+91115)
8
-
-
Counter top basin 560x455 (Parryware make) white
51
-
-
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
600mmx450mm size B.E mirror
15
-
-
Mirror of best quality of 2100mmx600mm
20.25
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
7.25
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
4.82
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
2.4
-
-
In 1st floor
5.48
-
-
In 2nd floor
5.48
-
-
In 3rd floor
5.48
-
-
In 4th floor
5.48
-
-
In 5th floor
4.83
-
-
Providing & applying water proofing treatmnt (Twor Component glass fibre reinforced specially formulated acrylic modified , cementitious elastic coating system) using Sika Top Seal 109 hi & Sika Fab-1 or equivalent (Glass fibre cloth) @3 Kg/Sqmtr. before one coat of Sika Top Seal 109 high or equivalent Primer @ 200 gm/sq.mtr over the cleaned RCC Horizontal Surface & Outer retaining wall etc including the cost of all materials, cost of labour, conveyance, taxes, T & P etc . all complete as per the direction of Engineer-in-Charge.
96.1
-
-
In 1st floor
96.1
-
-
In 2nd floor
96.1
-
-
In 3rd floor
96.1
-
-
In 3rd floor
96.1
-
-
In 4th Floor
83.55
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In Superstructure
0.33
-
-
In 1st Floor
0.22
-
-
In 2nd floor
0.22
-
-
In 3rd floor
0.22
-
-
In 4th Floor
0.22
-
-
In 5th Floor
0.22
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
5.2
-
-
In 1st Floor
4.02
-
-
In 2nd floor
4.02
-
-
In 3rd floor
4.02
-
-
In 4th Floor
4.02
-
-
In 5th Floor
4.02
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
0.27
-
-
In 1st Floor
0.22
-
-
In 2nd floor
0.22
-
-
In 3rd floor
0.22
-
-
In 4th Floor
0.22
-
-
In 5th Floor
0.22
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
0.34
-
-
In 1st Floor
0.27
-
-
In 2nd floor
0.27
-
-
In 3rd floor
0.27
-
-
In 4th Floor
0.27
-
-
In 5th Floor
0.27
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12mm thick CP (1:4) on bw- In gf
152.79
-
-
In 1st floor
180.6
-
-
In 2nd floor
180.6
-
-
In 3rd floor
180.6
-
-
In 4th floor
180.6
-
-
In 5th floor
150.99
-
-
Supplying all materials, labour, T&P and providing Mat finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 600cm x 600cm-Kajaria-Fogparla or equivalent make to be pre-approved by the Engineer in charge)
Ground floor
48.98
-
-
In 1st floor
55.68
-
-
In 2nd floor
55.68
-
-
In 3rd floor
55.68
-
-
In 4th floor
55.68
-
-
In 5th floor
48.98
-
-
Supplying all materials, labour, T&P and providing Granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge.
5.99
-
-
In first floor
4.65
-
-
In second floor
4.65
-
-
In third floor
4.65
-
-
In third floor
4.65
-
-
In fourth floor
4.65
-
-
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Kajaria / Somany make size 60 x 30 of Kajaria-Duren marfil or equivalent make to be pre-approved by the Engineer in charge)
In ground floor (inside/outside)
152.79
-
-
In first floor
177
-
-
In second floor
177
-
-
In third floor
177
-
-
In fourth floor
177
-
-
In fourth floor
147.39
-
-
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
103.32
-
-
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
309.6
-
-
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
299.43
-
-
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm
12
-
-
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 760mmx760mmx460mm
8
-
-
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 910mmx910mmx910mm
5
-
-
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. RCC rings soakway pit 1.22m dia x 2.10m deep
2
-
-
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Brick masonry soakway pit 1.80m dia x 2.60m deep
1
-
-
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
17
-
-
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia u-pvc pipe alround concrete
48
-
-
160mm dia u-pvc pipe alround concrete
72
-
-
Construction of 100 users RCC septic tank- (I/S size-5.70mx2.10mx2.40m)-30cm wide wall
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
38.88
-
-
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
23.33
-
-
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
43.2
-
-
Supplying all materials, labour, T&P and providing dewatering water from pit using 5 HP disel pump set etc.all complete as per specification and direction of the Engineer in charge
12
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
5.18
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
3.42
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
11.97
-
-
R.C.C beams, columns, girder and bressmer etc--In G.F
86.22
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
12.04
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
17.2
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In foundation and plinth
1.05
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.18
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In Ground floor
8.4
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
77.22
-
-
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
57.81
-
-
Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
17.1
-
-
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
Making MS step iron in 20mm diameter MS steel bars
7
-
-
Supplying all materials, labour, T&P and providing, fitting and fixing U-PVC SWR Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
160mm U-PVC plain Tee
2
-
-
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
16.2
-
-
(Sinking of 150mm size tube well through hand boring( water jet) method)
Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
3
-
-
Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge.
3
-
-
Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in charge
Drilling pilot bore from 0 to 360 metres
72
-
-
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.
Reaming 100mm to 150mm dia from 0-360 mtr
72
-
-
Reaming 150mm to 200mm dia from 0-360 mtr
72
-
-
Reaming 200mm to 250mm dia from 0-360 mtr
72
-
-
Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in charge
From 0-360 mtr
3
-
-
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge
200mm dia PVC casing pipe from 0 to 360 metres
72
-
-
Cost of 200 mm dia PVC ASTM pipe(sch-80)
72
-
-
Cost of 200mm dia Slott Cutting
18
-
-
200 mm dia C.I.end/top cutter plug
1
-
-
Cost & Conveyance of bentonite powder
12
-
-
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.
Labour charges
2
-
-
Cost and Conveyance of gravel
2
-
-
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.
Labour charges
1.8
-
-
Cost and Conveyance of sand
1.8
-
-
Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.
Labour charges
3
-
-
Supplying all materials , labour, T&P and providing & fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D & pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction.
32mm dia HDPE pipe
60
-
-
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
1
-
-
DOL Control panel
1
-
-
40mm dia steel short piece
1
-
-
Well cap
1
-
-
50mm size CI bracket
2
-
-
2.50 sqmm flat cable
50
-
-
Steel rope with cover
30
-
-
20mm dia rigid UPVC pipes
15
-
-
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
-
-
Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, earthwork in excavation in all kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.
1
-
-
Fire Fighting Sump Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
185.9
-
-
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
61.97
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
18.59
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
18.59
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
93.84
-
-
R.C.C beams, columns, girder and bressmer etc--In G.F
210.04
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
61.24
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
80.94
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
376.12
-
-
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
182.36
-
-
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
Making MS step iron in 20mm diameter MS steel bars
16
-
-
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
2
-
-
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.
50mm brass full way valve
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge In ground floor
50mm dia C-PVC Pipes
15
-
-
40mm dia C-PVC Pipes :
12
-
-
Supplying all materials, labour, T&P and providing, fitting and fixing of 1HP Single Phase Drainage Pump motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1HP Drainage Pump Set (Lubi Make)
1
-
-
DOL Control panel
1
-
-
Supplying all materials, labour, T&P and providing, fitting and fixing of 5HP Three Phase Drainage Pump motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
5 H.P Open Well Pump Set (Texma Make)
1
-
-
DOL Control panel
1
-
-
Fire Fighting Pump House
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
61.38
-
-
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
20.46
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
6.13
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
6.13
-
-
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
33.6
-
-
R.C.C beams, columns, girder and bressmer etc--In G.F
62.38
-
-
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
16.95
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
16.95
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
2.52
-
-
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In superstructure :
15.56
-
-
Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
44.16
-
-
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
70.7
-
-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12mm thick CP (1:4) on bw- In gf
180.2
-
-
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
46.4
-
-
Supplying all materials, labour, T&P and providing 25mm thick artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
33.6
-
-
Supplying all materials, labour, T&P and providing and fixing in position M.S. panelled door and window with M.S frame including conveyance of all materials to work site,payment of royality,taxes etc all complete as per specification and direction of the Engineer in charge.
1.12
-
-
Supplying all materials, labour, T&P and providing painting 2 coat with any approved paint on new wood/Iron work all complete as per specification and direction of the Engineer in charge
5.4
-
-
Finishing walls with weather coat over a coat of primaer of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.
198.75
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements