Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Rural Development Department - RDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Mar 2024
Closing Date24 Jun 2024
Tender Amount₹ 11,39,65,905
Costs
EMD
₹ 11,40,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_102497_1Bid Award Id
ViewTender No
C.E. (Civil) - 75 / 2023-24Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Carriage / disposal of excavated surplus earth from the worksite by mechanical means within a lead of 5Km including loading and unloading etc. complete. in all respect as per direction of Engineer-in-Charge.
1318.94
-
-
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.
794.47
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
433.65
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 250 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
-
-
-
... More
GROUND FLOOR
-
-
-
... More
Foundation & ground floor RCC slab
993.04
-
-
... More
Plinth Beam
142.74
-
-
... More
COLUMN
-
-
-
... More
Ground Floor
130.75
-
-
... More
First Floor
85.47
-
-
... More
Terrace Floor
20.57
-
-
... More
ROOF BEAM
-
-
-
... More
Ground Floor
193.94
-
-
... More
First Floor
193.94
-
-
... More
Terrace Floor
17.03
-
-
... More
LINTEL
-
-
-
... More
Ground Floor
4.68
-
-
... More
First Floor
4.91
-
-
... More
Terrace Floor
0.4
-
-
... More
CHAJJA
-
-
-
... More
Ground Floor
41.58
-
-
... More
First Floor
41.58
-
-
... More
Terrace Floor
2.7
-
-
... More
R.C.C. FLOOR & ROOF SLAB
-
-
-
... More
Ground Floor
305.76
-
-
... More
First Floor
305.76
-
-
... More
Terrace Floor
33.5
-
-
... More
DOUBLE HEIGHT SLAB
-
-
-
... More
Ground Floor
305.76
-
-
... More
RC.C. STAIRCASE
-
-
-
... More
Ground Floor
12.53
-
-
... More
First Floor
12.53
-
-
... More
R.C.C WALL
5.11
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL/SEL Tiger (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
2248.95
-
-
... More
FIRST FLOOR
809.65
-
-
... More
TERRACE FLOOR
88.95
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
299.96
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
684.02
-
-
... More
FIRST FLOOR
436.95
-
-
... More
TERRACE FLOOR
106.78
-
-
... More
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
15.86
-
-
... More
FIRST FLOOR
14.66
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
2657.11
-
-
... More
FIRST FLOOR
1931.42
-
-
... More
SECOND FLOOR
108.2
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
2274.61
-
-
... More
FIRST FLOOR
2182.73
-
-
... More
SECOND FLOOR
252.18
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
4297.86
-
-
... More
FIRST FLOOR
3215.75
-
-
... More
SECOND FLOOR
620.34
-
-
... More
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
1968.25
-
-
... More
FIRST FLOOR
1440.58
-
-
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
749.3
-
-
... More
FIRST FLOOR
582.94
-
-
... More
Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
62.8
-
-
... More
FIRST FLOOR
62.8
-
-
... More
Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
28.42
-
-
... More
FIRST FLOOR
28.42
-
-
... More
Fixing of Kota Stone of minium thickness 16mm thick of premium grade of size above 0.10 Sqm. in floors over 20mm thick bed of cement mortar 1:4 (1cement:4course sand)and filling the joint with white cement mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
17
-
-
... More
FIRST FLOOR
362.58
-
-
... More
TERRACE FLOOR
11.66
-
-
... More
Supplying and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Doors of NCL VEKA LTD./ FENESTA / KOMMERLING or equivalent using UPVC reinforced profiles 60mm/56mm x 56mm/63mm or equivalent for outer frames for two or more open able shutters 100mm/56mm x 60mm/84mm and thickness not less than 2.25mm for open able shutter frame capable of mounting single glazing system, the glazing bead profiles must be co-extruded with EPDM gasket and confirm to the same test as profile, the gasket should be made of EPDM(Ethyl Propylene Di-Monomor) for better ceiling and noise reduction, the outer frame and shutter must have suitable drainage provision, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated & welded through fusion welding the Door sash shall be fitted with 6mm thick float glass toughened for Indian weather conditions of reputed make duly fixed with
-
-
-
... More
EPDM weathering seal resistant accessories for Door - friction stay hinges of stainless steel grade 304 - 2 nos., per sash, handle with alloy casting 1 no. per sash, multipoint locking system suitably concealed 1 no. per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber, sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges, transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
109.25
-
-
... More
FIRST FLOOR
36.5
-
-
... More
SECOND FLOOR
9
-
-
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
GROUND FLOOR
2791.25
-
-
... More
FIRST FLOOR
3417
-
-
... More
TERRACE FLOOR
210
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
8157.54
-
-
... More
FIRST FLOOR
6484.58
-
-
... More
TERRACE FLOOR
926
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge) (Internal)
-
-
-
... More
GROUND FLOOR
4608.98
-
-
... More
FIRST FLOOR
3851.77
-
-
... More
SECOND FLOOR
305.66
-
-
... More
Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI/ equivalent make)
-
-
-
... More
GROUND FLOOR
4608.98
-
-
... More
FIRST FLOOR
3851.77
-
-
... More
TERRACE FLOOR
305.66
-
-
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
GROUND FLOOR
4297.86
-
-
... More
FIRST FLOOR
3215.75
-
-
... More
TERRACE FLOOR
620.34
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
(External)
-
-
-
... More
GROUND FLOOR
4297.86
-
-
... More
FIRST FLOOR
3215.75
-
-
... More
SECOND FLOOR
620.34
-
-
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make: Asian/ Berger/ ICI or equivalent make duly approved by Engineer-in-Charge)
-
-
-
... More
GROUND FLOOR
55.83
-
-
... More
FIRST FLOOR
68.34
-
-
... More
TERRACE FLOOR
4.2
-
-
... More
Providing approved primer of one coat to the Iron work including cost of all materials, labour, Tools & Plant, Brushes etc. complete in all respects as directed by Engineer-In-Charge.
-
-
-
... More
GROUND FLOOR
111.65
-
-
... More
FIRST FLOOR
136.68
-
-
... More
TERRACE FLOOR
8.4
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. (Make-JINDAL )
-
-
-
... More
GROUND FLOOR
281.18
-
-
... More
FIRST FLOOR
281.18
-
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
TERRACE FLOOR
2167.99
-
-
... More
Filling Bitumen and cement and Jute Fibre in Expansion joints inclusive of cost of materials ,bitumen and cement portion(3:1) including cleaning before pouring 12mm to 25mm and 15cm depth with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
62.9
-
-
... More
Ditto extra for each additional 2.5cm depth over the depth of 15cm
62.9
-
-
... More
Inserting premoulded expansion joint including cleaning labour only complete with cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect as per the direction of the Engineer-in-charge.
62.9
-
-
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
901.83
-
-
... More
Supplying and fitting-fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD.) Three Track - Three Panel Sliding window-60-Series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames and Window Sash of 39 mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fastenres, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
-
-
-
... More
GROUND FLOOR
111.65
-
-
... More
FIRST FLOOR
136.68
-
-
... More
TERRACE FLOOR
4.2
-
-
... More
Supplying, fitting and fixing of two track UPVC sliding window of apporoved make (Prominence / FENESTA/NCL VEKA LTD./ Koemmerling/ DURAPLAST) with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including all cost,conveyance,royalty & taxes of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
111.65
-
-
... More
FIRST FLOOR
136.68
-
-
... More
TERRACE FLOOR
8.4
-
-
... More
Fixed Glazing with part top hung Typical drawing Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete.
117.91
-
-
... More
Supplying and fitting-fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilator/Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No, per set of sashes, and the system is to be installed at the site using anchor fastners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
-
-
-
... More
GROUND FLOOR
10.05
-
-
... More
FIRST FLOOR
10.05
-
-
... More
E.I. WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- FINOLEX/RR KABEL/ POLYCAB/ HAVELLS/ Equivalent with 20 mm dia PVC flexible non metallic conduit Make-NORPACK / POLYCAB/ Equivalent with 6A modular type switch ISI marked Make-Schneider(Unica Pure)/legrand( Myrius) /Panasonic (Vision)/Equivalent, and ceiling rose ISI marked Make- Anchor/Havells/Eq. of modular type G.I box with cover Make-Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/Eq., of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. GROUP-A.
240
-
-
... More
GROUP-B
200
-
-
... More
GROUP-C
230
-
-
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
Make-Schneider/legrand /Panasonic/Equivalent
60
-
-
... More
Point wiring for 6 amp modular socket outlet with 2 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit (Make- NORPACK/ Eq.) with modular one way type modular switch ISI marked GI box and earthing point with 1 x 1.5 sq.mm FRLS PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard/Eq. )
210
-
-
... More
Supplying,fixing of 2x6A +1x16A Plug on the separate board with complete fitting by 02 no of 6A switch & socket,1 set 16A Switch(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/Eq.
60
-
-
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/ Equivalent,(For equipement power)
203
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable Havells or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty as required as per direction of Engg.-in-Charge. 2x1.5 + 1x1.5 in 20mm dia PVC Pipe
1800
-
-
... More
2x2.5 + 1x1.5 in 20mm dia PVC Pipe
4200
-
-
... More
2x4 + 1x1.5 in 20mm dia PVC Pipe
1600
-
-
... More
2x6 + 1x2.5 in 25 mm dia PVC Pipe
450
-
-
... More
4x6 + 2x2.5 in 32 mm dia PVC Pipe
987
-
-
... More
4x10 + 2x4 in 32 mm dia PVC Pipe
784
-
-
... More
Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/Eq., make
30
-
-
... More
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.
Schneider/Hager/Siemens /Eq. make
12
-
-
... More
Supplying and fixing 63 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/Eq., make
10
-
-
... More
Supplying and fixing 63 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.
Schneider/Hager/Siemens /Eq. make
5
-
-
... More
Supplying and fixing AC point consisting of 16A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge.(Make-Cona/Anchor/Crabtree/Legrand/Equivalent)
12
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of as required as per direction of Engg.-in-Charge
6
-
-
... More
Supplying and fixing batten holder / BK angle holder in place of Ceiling Rose ISI marked including connection etc. as required.
34
-
-
... More
FIXTURE
-
-
-
... More
(Light fitting Fixture & Fan) S/F of 300mm exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.(Make- Usha/Orient/Havells/Crompton/Equivalent)
12
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers (Make-Havells/almonard/cromptron/ Usha make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge(For workshop & kitchen)
9
-
-
... More
S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make
10
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep BLDC ceiling fan with aluminium blades having wattage not more than 28W and Air delivery ≥ 215(m3/min) Make-USHA(Teohnix)/Crompton(Energion Groove)/Havells(Efficiencia Neo or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
250
-
-
... More
S/F of 24Watt Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj/Equivalent)
60
-
-
... More
S/F of 18W Basic all purpose surface and wall mounted LED batten with Aluminium housing & integrated electronic driver. (Make-Havells/Philips/Crompton/bajaj or equivalent.)
62
-
-
... More
S/F of 80Watt,5700K,WIDE BEAM,IP66,IK 10 ,140 lm/w Highbay double heighted LED downlighter with all required accessories as required.
(Make-Havells/Crompton/Philips/Bajaj/Equivalent)
120
-
-
... More
S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips/Eq. make.
8
-
-
... More
S/F. of 90Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips/Eq. make.
8
-
-
... More
Providing and fixing extra down rod of 100 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.
250
-
-
... More
BDB'S & MCB
-
-
-
... More
(BDBS,DB,AC DB,FLOOR PANELS,MCBS) Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) .Make-Siemens/Schneider/Legrand/Eq. 4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE
14
-
-
... More
6 WAY (6 + 18) DOUBLE DOOR, HORIZONTAL TYPE(For Machines)
2
-
-
... More
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) Make-Siemens/Schneider/Legrand/Eq. 8 Way Double Door
4
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Siemens/Schneider/Legrand/Eq.
288
-
-
... More
6-32A DP MCB
25
-
-
... More
63A DP MCB
20
-
-
... More
63A FP MCB
16
-
-
... More
EARTHING
-
-
-
... More
(Earthing) S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.
4
-
-
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
4
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
550
-
-
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
233
-
-
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
4
-
-
... More
CABLING AND END TERMINATION
-
-
-
... More
(CABLING AND END TERMINATION) Supply of 300 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.(Make-Polycab/Havells/ Equivalent)(From Transformer to Main Panel,DG)
120
-
-
... More
Supply of 185 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.(Make-Polycab/Havells/Equivalent)
133
-
-
... More
Supply of 95 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.
(Make-Polycab/Havells/ Equivalent)(From Main Panel to Floor Panels)
125
-
-
... More
Supply of 50 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.
(Make-Polycab/Havells/ Equivalent)(From Panel to Machine panels)
188
-
-
... More
Supply of 6 sq mm 5 core XLPE insulated Copper Armoured cables ISI marked.
(Make-Polycab/Havells/ Equivalent) For machines
866
-
-
... More
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
313
-
-
... More
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as
366
-
-
... More
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
322
-
-
... More
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required.
899
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x300 sq mm
6
-
-
... More
3.5 core x95 sq mm
10
-
-
... More
4 core x16sq mm
10
-
-
... More
3.5 core x50 sq mm
18
-
-
... More
3.5 core x35 sq mm
12
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
200 mm dia
21
-
-
... More
100 mm dia
21
-
-
... More
PANELS
-
-
-
... More
S/F of 96x72x36 no 14 SWG sheet metal for main 630amp panel board having 630 amp,36kA FP MCCB as incommer of main & 400A 4P MCCB,36Ka LSING for DG followed by 400A 4P Changeover switch, 700 amp electrolyte cu bus bar,250 amp FP mccb 25 kA-4 No.,125 amp FP mccb 25 ka-12 No., 100A FP MCCB 16 KA-10 No,63A FP MCB,10ka-12No,40A DP MCB,10ka-8 No.s as Outgoing with MFM ,thirty six nos led indicator,65KA SPD TYPE 2+1 4P,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make - Siemens/ legrand/Schneider/Equivalent)(Main Panel)
1
-
-
... More
S/F of 40x36x10 no 14 SWG sheet metal for main 250amp panel board having 250 amp MCCB 25 KA as incommer, 250 amp electrolyte cu bus bar,63 amp FP mcb -6 No.,40 amp DP mcb-3No. as Outgoing with MFM, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make Siemens/ legrand/Schneider/Equivalent)(Floor Panel(POWER))
1
-
-
... More
S/F of 40x36x10 no 14 SWG sheet metal for main 250amp panel board having 250 amp MCCB 25 KA as incommer, 250 amp electrolyte cu bus bar,63 amp FP mcb -10 No.,40-63 amp DP mcb-6No. as Outgoing with MFM, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make Siemens/ legrand/Schneider/Equivalent)(POWER PANEL 2) (Welder Panel)
1
-
-
... More
S/F of 30x36x10 no 16/18 SWG sheet metal for main 100amp panel board having 100 amp FP MCCB 16 kA as incommer, 100 amp electrolyte cu bus bar,32 amp FP mcb -6No.,63A DP MCB-3 No. as Outgoing with MFM, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make Siemens/ legrand/Schneider/Equivalent) (Light panel, ups)
2
-
-
... More
S/F of 30x36x10 no 16/18 SWG sheet metal for main 125amp panel board having 125 amp MCCB 25 KA as incommer, 125 amp electrolyte cu bus ba-1 Set, 16-32A, 4P MCB.10KA- 10 No,6-32A DP MCB-6 No as Outgoing with MFM, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make Siemens/ legrand/Schneider/Equivalent)(Lab Machine Panel)(MMV,MMTM,WELDING,MACHINIST,PAINTER,SEWING TECH. LAB ONLY)
7
-
-
... More
S/F of 30x24x10 no 16/18 SWG sheet metal for main 63 Amp panel board having 1 No. of 63 amp FP MCB(C-Series)as incommer, 32 amp FP MCB- 2 No,40A DP MCB-3 No, Timer - 1 NO, 1 Power contactor- 1 No , 63 amp electrolyte cu bus bar,MFM, toggler switch,three nos led indicator,Drum insulator,danger Board as per the direction of site engineer in charge (make Siemens/ legrand/Schneider/Equivalent)(Feeder Pillar for Ext. Lighting)
1
-
-
... More
CABLE TRAY
-
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make /Eaton/Panduit or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
90
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make /Eaton/Panduit or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
160
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make /Eaton/Panduit or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
60
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 34mm(H) x 225mm(W), of Legrand - Cablofil make /Eaton/Panduit or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
68
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 50mm(W), of Legrand - Cablofil make /Eaton/Panduit or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
88
-
-
... More
LIGHTENING PROTECTION
-
-
-
... More
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA system should be Replacement Warranty will be 5 years
18
-
-
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA system should be Replacement Warranty will be 5 years
54
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The entire LA system should be Replacement Warranty will be 5 years
54
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA system should be Replacement Warranty will be 5 years
22
-
-
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA system should be Replacement Warranty will be 5 years
22
-
-
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA system should be Replacement Warranty will be 5 years
122
-
-
... More
ELV PART
-
-
-
... More
Supplying and fixing of Hybrid EPABX system equipped with 40 Analog extensions and 6 Analog Trunk, including required hardware and software etc as reqd.
1
-
-
... More
Supplying and drawing 4 pair Telephone WIRE protected with PVC sheath in the with surface/ recessed steel/ PVC conduit as required as per direction of Engg.-in-Charge. Make-Legrand
388
-
-
... More
Supplying and telephone socket socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/panasonic/schneider
12
-
-
... More
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 270 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC. Digisol (Model No. DG-GS1528HPE-P)/Netgear/Cisco
3
-
-
... More
Supplying & Commissioning of Telephone Hand Set as per direction of Engg.-in-Charge.
12
-
-
... More
Supply,installation, testing and commissioning of 16Channel NVR with 2 Sata Ports Make-Honeywell/Bosch /UNV
1
-
-
... More
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Panduit/Systimax
899
-
-
... More
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box Make: Legrand/Panduit/Systimax
30
-
-
... More
Supply & fixing of Cat6 24 Port Loaded Patch Panel: Make: Legrand/Panduit/Systimax
3
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord, 1mtr, Make: Legrand/Panduit/Systimax
72
-
-
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord, 2mtr.Make: Legrand/Panduit/Systimax
10
-
-
... More
Supply & Installation of 6F Single Mode Armoured FO Cable through existing conduit. Make: Legrand/Panduit/Systimax
165
-
-
... More
Supply and Installation of 6 Port Rack Mount Draw Type LIU loaded with SM SC Adaptors and Pigtails including core splicing and connnectrisation. Make: R&M / Legrand / Panduit
3
-
-
... More
Supply & Installation of Single Mode SC-LC Type OFC Patch Cord, 2mtr length. Make: Digisol/Cisco/HP
5
-
-
... More
Supply & Installation of 1000Base LX Fiber Transceiver. Make: Digisol/Cisco/HP
3
-
-
... More
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable manager and H/W Pkt. Make : Netrack/Valrack/Rittal
2
-
-
... More
Supply & Installation of 24U/600D Floor Standing Rack With FAN, PDU, Cable manager and H/W Pkt. Make: Netrack/Valrack/Rittal
1
-
-
... More
Supply,installation, testing and commissioning of vandal proof 4 MP Dome/Bullet Camera with 25 Mtrs IR Range Make-Honeywell/Bosch /UNV
15
-
-
... More
Supply, Installation,Testing & Commisioning of Surveliance 4TB HDD. Make:- WD/Segate
2
-
-
... More
P.H. WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge Ground Floor 20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
60
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
80
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
25
-
-
... More
First Floor 20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
80
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
60
-
-
... More
32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
40
-
-
... More
Second Floor 40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
60
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge . 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
6
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
53
-
-
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
20
-
-
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
20
-
-
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
-
-
... More
32mm dia G.M or Brass F.W valve (Sakti make)
2
-
-
... More
40mm dia G.M or Brass F.W valve (Sakti make)
5
-
-
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
20
-
-
... More
15mm CP Extension piece
22
-
-
... More
125mm CP grating
55
-
-
... More
15mm size C.P. flange
22
-
-
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
32
-
-
... More
Single Lever Sink Mixer With Swinging Spout (FLR-5165)
7
-
-
... More
15mm dia CP Urinal Flush valve (PRS-ANQ-077 Jaquar make)
6
-
-
... More
Floor Mounted bidet(380x605x385mm) VGS-WHT 81151
6
-
-
... More
Single Lever-1 Hole Bidet Mixer with popup waste System with 375mm long Braided Hosed(VGP-ABR-81227)
6
-
-
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
8
-
-
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground Floor
22
-
-
... More
First Floor
22
-
-
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge Ground Floor
11
-
-
... More
First Floor
11
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor
70.1
-
-
... More
First Floor
90
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
150
-
-
... More
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
60
-
-
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
30
-
-
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
16
-
-
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
16
-
-
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
18
-
-
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
11
-
-
... More
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
22
-
-
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
21
-
-
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
14
-
-
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
22
-
-
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
18
-
-
... More
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
16
-
-
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
32
-
-
... More
W/C connector
14
-
-
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
18
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'S' trap plain (Hindware/Parryware/Neycer make) Hindware-20044
9
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Water Closet(Indian type W.C. pan/Orissa pattern squanting pan) duly embedd in cement concrete(1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250x130mmx 30 mm fotrest , fixing 100 mm dia HCI 'p' or 's' trap (with/without 50mm dia horn)for water closet squanting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 580mm size orissa pan (parryware/cera/nycer make)
9
-
-
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal(Hindware)-No.60020
6
-
-
... More
Cost of 15mm dia urinal spreader
6
-
-
... More
32mm dia CP dome waste
6
-
-
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge Under Counter basin (560x450)Hindware-No.10095
12
-
-
... More
550x400mm WH Basin with pedestall (Jaquar/ Hindware/ Parryware) 22” x 16” pedestal Hindware - 10010
19
-
-
... More
Matrix set of Hindware - 70002
2
-
-
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
7
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge .25mmx600mm long CP towel rail
18
-
-
... More
Towel ring
23
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails.
19
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.BIG Size mirror 4x2.80x0.60=6.72
6.72
-
-
... More
600mm x 450mm size B.E Mirror
19
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP Soap holder(Jaquar)CAN-CHR-1131N
35
-
-
... More
Toilet Paper Roll Holder (Jaquar)CAN-CHR-1153S
2
-
-
... More
Double Coat Hook (Jaquar)CAN-CHR-1161N
20
-
-
... More
Soap Dispenser with Glass Bottle (Jaquar)ACN-MCH-1135N
2
-
-
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
35
-
-
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
12
-
-
... More
Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (1 1/2") 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. In Ground Floor
7.72
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. In Ground Floor
3.87
-
-
... More
In First Floor
12.61
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .In Ground Floor
215.2
-
-
... More
In First Floor
256.9
-
-
... More
Supplying all materials, labour, T&P and providing dr. fixit (tarshild) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
226.29
-
-
... More
Providing vitrified tile flooring using Matt vitrified tiles having thickness of 8mm to 10mm conforming to IS 13756 of 600mm x 600mm / 600mm x 300mm Colour & Printed Series (homogeneous) of approved quality of Somany / Kajaria / Asian / Johnson or equivalent in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. Vitrified floor Tile 60cm x60cm In Ground Floor
77.24
-
-
... More
In First Floor
89.67
-
-
... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 600x300mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ceramic wall Tile 60cm x30cm, In Ground Floor
215.2
-
-
... More
In First Floor
256.9
-
-
... More
Supplying all materials, labour, T&P and providing and filling sand including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In First Floor
4.03
-
-
... More
Fly Ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:4) with ordinary portland cement (OPC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.Ground floor, Counter basin wall-2x3x0.60x0.125x0.75=
0.34
-
-
... More
First floor
0.34
-
-
... More
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.Ground floor
0.36
-
-
... More
First floor
0.36
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. 0.72cum @ 0.80 qntl / cum =
0.58
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete. RCC floor roof, chajja etc.Ground floor 1x0.60x2.98=
1.79
-
-
... More
First floor
1.79
-
-
... More
Supplying all materials, labour, T&P and providing granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge Ground floor
22.73
-
-
... More
First floor
20.64
-
-
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
46.89
-
-
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge .Ground Floor
141.7
-
-
... More
Providing & fixing Greenlam Sturdo Essentia Collection- Changing Room Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards.
This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturer’s specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish,available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs ( SS- 316 ). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors , which will get fixed on pilasters with SS Screws The design is available in two option with door/ with curtain ( Curtain not to be provided by Greenlam )
All screws will of 316 Grade in stainless steel . All pilasters are supported by grade- 6 Nylon Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle with standard dimension of 1995mm Height x 1000mm Width x 1500mm Depth, which includes 600mm door size width).Toilet Cubicle I-Shape (Front Partition) with standard dimension of 1995mm Height x 1000mm Width which includes 600mm door size width).
6
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge Aqua guard pure Chill 120 PSS UV
2
-
-
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
17
-
-
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge .Inside size 76cmx76cmx46cm with 18” dia
11
-
-
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m x0.45 m
3
-
-
... More
Fitting and fixing RCPC cover slab (0.45m dia)
13
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
84
-
-
... More
160mm dia u-pvc pipe alround concrete
70
-
-
... More
Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
-
-
... More
Construction 1 nos 100 users RCC Septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
59.4
-
-
... More
- do - with addl. Depth of 1.5 m
37.62
-
-
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
... More
In ground floor
5.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
... More
In ground floor
-
-
-
... More
1x9.90mx4x0.15m=
5.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
3.47
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
27.87
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Roof slab
37.15
-
-
... More
For RCC wall
128.4
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
22.3
-
-
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
83.82
-
-
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
-
-
... More
Construction of 20000 Liters RCC Under ground Reserver of Inside size- 4.00 X 3.00 X2.00m
-
-
-
... More
Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department.
43.37
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
20.24
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
5.78
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.74
-
-
... More
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
11.64
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
11.64
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
14.34
-
-
... More
RCC Beam, Column, wall etc
59.2
-
-
... More
RCC Plinth bend/ Raft
8.4
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
40
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
40
-
-
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
-
-
... More
Sinking of 200mm x150mm large tube well through DTH method 2nos Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore 00 mtr to 30mtr
60
-
-
... More
30 mtr to 45mtr
30
-
-
... More
Drilling of 150mm dia bore. 45 mtr to 145
200
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 200mm dia PVC pipe, 00 mtr to 45 mtrs
90
-
-
... More
Cost of 200mm dia PVC (sch-80) pipe
91.2
-
-
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig
2
-
-
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: For 300m depth
2
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
3
-
-
... More
DOL Control panel
3
-
-
... More
32mm dia steel short piece
4
-
-
... More
Well cap
2
-
-
... More
50mm size CI bracket
1
-
-
... More
2.50sqmm flat cable
150
-
-
... More
Steel rope with cover
30
-
-
... More
Labour charges for lowering including transportation
3
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. 32mm HDPE pipes (Finolex/Supreme make)
180
-
-
... More
Lbour Charges for lowering of submersible motor and pipw etc.
3
-
-
... More
Supplying all materials, labour, T&P and constructing borewell protection chamber of the inside size 650x650x1000mm etc
2
-
-
... More
Construction of 6.75mx3.60m x 1.40m(h) Rain water harvesting system
-
-
-
... More
Sinking of tube well through D.T.H.Rig.
-
-
-
... More
200mm dia- 0.0m to 30.00m
25
-
-
... More
Lowering of PVC casing pipe inside bore.
-
-
-
... More
200mm dia- 0.0m to 30.00m
25
-
-
... More
Cost.of 200mm dia (Sch.80)Pipe
25
-
-
... More
Cutting slot in casing pipe for recharge of rain water
25
-
-
... More
Labour for packing gravel outside the tube well
-
-
-
... More
25.0mx22/28{(0.40)²-(0.20)²}=2.35
2.35
-
-
... More
Cost of washed gravel.
2.35
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
66.69
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.08
-
-
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.4
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
91.2
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
48.6
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3.13
-
-
... More
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.42
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.34
-
-
... More
Providing and filling filter media
-
-
-
... More
40mm size bolder-1x6.0x2.50x0.85=12.75
12.75
-
-
... More
20mm size washed gravel-1x6.0x2.50x0.40=6.00
6
-
-
... More
Course sand-1x6.0x2.50x0.30=4.50
4.5
-
-
... More
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
3
-
-
... More
Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class K.B brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
90
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements