Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 66,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Block Public Health Unit (bphu)at Chc Gumagada In The District Of Kandhamal For The Year 2023-24
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CERWI_104321_2Bid Award Id
ViewTender No
Online Tender/04/EERWD PHULBANI/2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Online transfer of cost of tender paper, cost of EMD, Valid GSTN, Valid PAN, Registration Certificate, Affidavit with other required documents as per the DTCN Clause
BOQ Items
Providing and laying cement concrete (1:2:4) in foundation and plinth using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
7.99
59849
7490.6
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column Base Footing)
22.83
150840
6607.1
Column Sueprstructure
6.13
86474
14106.8
Plinth Band
7.74
54422
7031.3
Split lintel over openings
1.46
15903
10892.7
Floor Beam
8.9
125550
14106.8
Chajja
12.56
12706
1011.7
Stair Case
5.94
80211
13503.6
Floor Slab
10.41
100620
9665.8
Straightening, bend up or coiled rod, cutting, bending, cranking, hooking welding or jointing (if required) the MS/Tor rod and binding wire, laying the grills and placing in proper position as required for R.C.C work providing fan hooks when necessary including cost conveyance, Royalty, Cess taxes of M.S. or Tor steel and binding wire of 18 to 20 gauge and cost of all labour T&P required for the work as per the specification and direction of the Engineer-in-charge.
71.99
647485
8994.1
Fly ash brick work 23cm x 11cm x 8cm in CM (1:6) after immersing brick for six hours in water before use in foundation and plinth having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
11.57
70435
6087.79
Fly ash brick work 23cm x 11cm x 8cm in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
22.12
135511
6126.2
Fly ash brick work 23cm x 11cm x 8cm in CM (1:4) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
4.84
30732
6349.6
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
124.62
22942
184.1
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
250.61
66662
266
6mm thick cement plaster in Cement mortar (1:4) finished smooth to RCC surface to all floors finished smooth including closed deep chipping and slurry treatment with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge
74.12
15372
207.4
Providing fitting fixing Vitrified tiles in floors of size 600x600mm treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
45.48
51597
1134.5
Providing fitting fixing Vitrified industrial tiles in floors of size having thickness 6mm to 10mm and landing on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
28.64
29702
1037.1
Providing fitting fixing Vitrified tiles in dados skirting and risers of steps 12mm thick bed cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
2.21
2799
1266.8
Supplying fitting & fixing of 30cm x 20cm x 20cm x 20cm special plain/ printed series Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm in dados skirting and risers of stpes laid on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
51.72
50747
981.2
Providing fitting fixing of 20mm thick Granite stone in floors of size having thickness 6mm to 10mm and landing on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
44.88
125805
2803.15
Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receie materials labour T&P etc. complete including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
270.8
24263
89.6
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
449.35
35139
78.2
Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approed shade with cost conveyance taxes of all materials and cost of all labour T&P etc.complete as per the specification and direction of the EIC
324.73
34843
107.3
Finishing wall with weather coat paint two coats with any approved quality of weather seal coat over a coat of priming on new work to gibe an even shade including cost of all materials labour T&P required for the work etc.complete as per the specification and direction of the EIC
124.62
12387
99.4
Providing fitting and fixing of M.S. Door & windows with grills, grillls made out of M.S. Angle Frame M.S. float sheet of approved design with all cost conveyance taxeswith all labour T&P sundries etc. of all materials complete in all respect as per specification and direction of the Engineer-in-Charge
325.38
24663
75.8
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect
120.31
41206
342.5
Supplying fitting & fixing of 35mm thick flush door shutters with flush door block board 'A' premium 35mm thick both side teak (Green ply / Allwin) both side laminated with 4 mm thick veener board (Teak Heritage) (Archid ply/ Green ply ) by using adhesives, with all labour, iron fitting & wooden hinged cleats etc. fitted & fixed complete in all respect, including cost of iron fitting , alluminum fittings, all labours, T&P etc. as per specification approved by the Department & as per direction of the E.I.C
10.72
42505
3965.1
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Casement window with top fixed – 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55 mm x 2.5 mm for outer frames.75 mm x 60 mm x 2.25 mm for casement window sash profile and 74 mm x 60 mm x 2.5 mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
1.42
10772
7586
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
10.94
65464
5984
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
1.08
7684
7115
Priming one coat with any approved primer (to receive Enamel paint) with cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
11.59
850
73.4
Painting two coats with approved enamel paint over a coat of primer to new wood/iron work with cost conveyance taxes of all materials and cost of all labour T&P etc.complete as per the specification and direction of the EIC
11.59
2146
185.2
Providing, supplying, fitting and fixing in position well dressed and well seasoned sal wood framed and fixed (wrought and put up) in choukath for doors, windows and ventilator including cost of iron works and coal taring 2 coats to wall side faces of choukaths including cost of coal tar cutting grooves and mending sizes where necessary with cost conveyance, Royalty, Cess taxes of all materials all labour and T&P required for the work etc. complete as per the specification and direction of the Engineer-in-charge.
1.63
134963
82799.47
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column Superstructure)
5.12
80702
15762.2
Split lintel over openings
1.21
14405
11905.3
Floor Beam
6.12
96464
15762.2
Chajja
7.97
9072
1138.3
Stair Case
5.5
82710
15038.3
Roof Slab
9.17
95670
10433
Straightening, bend up or coiled rod, cutting, bending, cranking, hooking welding or jointing (if required) the MS/Tor rod and binding wire, laying the grills and placing in proper position as required for R.C.C work providing fan hooks when necessary including cost conveyance, Royalty, Cess taxes of M.S. or Tor steel and binding wire of 18 to 20 gauge and cost of all labour T&P required for the work as per the specification and direction of the Engineer-in-charge.
30.79
277932
9026.7
Fly ash brick work 23cm x 11cm x 8cm in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
20.95
136078
6495.4
Fly ash brick work 23cm x 11cm x 8cm in CM (1:4) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
3.49
23448
6718.85
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
98.65
18615
188.7
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
197.87
53998
272.9
6mm thick cement plaster in Cement mortar (1:4) finished smooth to RCC surface to all floors finished smooth including closed deep chipping and slurry treatment with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge
68.49
14574
212.8
Providing fitting fixing Vitrified tiles in floors of size 600x600mm treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
68.49
78605
1147.7
Providing fitting fixing Vitrified tiles in dados skirting and risers of steps 12mm thick bed cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
11.92
15337
1286.7
Supplying fitting & fixing of 30cm x 20cm x 20cm x 20cm special plain/ printed series Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm in dados skirting and risers of stpes laid on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
1.43
1431
1001.1
Providing fitting fixing of 20mm thick Granite stone in floors of size having thickness 6mm to 10mm and landing on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
26.85
75617
2816.3
Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receie materials labour T&P etc. complete including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
253.01
23150
91.5
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC (12mm Cement Plaster)
98.65
8039
81.5
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC (16mm Cement Plaster)
266.36
21362
80.2
Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approed shade with cost conveyance taxes of all materials and cost of all labour T&P etc.complete as per the specification and direction of the EIC
266.36
29139
109.4
Finishing wall with weather coat paint two coats with any approved quality of weather seal coat over a coat of priming on new work to gibe an even shade including cost of all materials labour T&P required for the work etc.complete as per the specification and direction of the EIC
98.65
10151
102.9
Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receie materials labour T&P etc. complete including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
266.36
24371
91.5
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Casement window with top fixed – 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55 mm x 2.5 mm for outer frames.75 mm x 60 mm x 2.25 mm for casement window sash profile and 74 mm x 60 mm x 2.5 mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
2.84
21544
7586
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
14.58
87246
5984
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
0.72
5122
7115
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect
61.2
20961
342.5
Supplying fitting & fixing of 35mm thick flush door shutters with flush door block board 'A' premium 35mm thick both side teak (Green ply / Allwin) both side laminated with 4 mm thick veener board (Teak Heritage) (Archid ply/ Green ply ) by using adhesives, with all labour, iron fitting & wooden hinged cleats etc. fitted & fixed complete in all respect, including cost of iron fitting , alluminum fittings, all labours, T&P etc. as per specification approved by the Department & as per direction of the E.I.C
4.73
18754
3965.1
Providing fitting and fixing of M.S. door, window with grills, Grills made out of M.S. Angle frame M.S. Flat sheet etc. grill for window, ventilator etc. complete with all cost conveyance taxeswith all labour T&P sundries etc. of all materials complete in all respect as per specification and direction of the Engineer-in-Charge
219.58
16644
75.8
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
13.63
1026
75.3
Priming one coat with any approved primer (to receive Enamel paint) with cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
13.63
2588
189.9
25mm thick grading concrete (1:2:2) with 6mm size hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing including cost conveyance, Royalty, Cess taxes of all materials, labour T&P articles required for the work etc. as per the specification and direction of the Engineer-in-charge.
172.8
65612
379.7
Providing fitting, fixing of Aluminums door with OEL anodized aluminum door section of 9202 as vertical member 9201 as top member and 9202 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost conveyance, taxes all materials and labour, T&P, hire charges of drilling machine, labour charges etc complete as per specification & direction of the E.I.C.
90
671937
7465.97
Providing, supplying, fitting and fixing in position well dressed and well seasoned sal wood framed and fixed (wrought and put up) in choukath for doors, windows and ventilator including cost of iron works and coal taring 2 coats to wall side faces of choukaths including cost of coal tar cutting grooves and mending sizes where necessary with cost conveyance, Royalty, Cess taxes of all materials all labour and T&P required for the work etc. complete as per the specification and direction of the Engineer-in-charge.
0.86
81698
95219.39
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column Superstructure)
2.8
49679
17742.7
Split lintel over openings
0.19
2491
13114.4
Floor Beam
2.5
44356
17742.7
Chajja
3.9
5030
1289.8
Roof Slab
3.3
37447
11347.7
Straightening, bend up or coiled rod, cutting, bending, cranking, hooking welding or jointing (if required) the MS/Tor rod and binding wire, laying the grills and placing in proper position as required for R.C.C work providing fan hooks when necessary including cost conveyance, Royalty, Cess taxes of M.S. or Tor steel and binding wire of 18 to 20 gauge and cost of all labour T&P required for the work as per the specification and direction of the Engineer-in-charge.
11.12
100758
9061
Fly ash brick work 23cm x 11cm x 8cm in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
13.79
95433
6920.5
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
88.52
17119
193.4
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
41.52
11621
279.9
6mm thick cement plaster in Cement mortar (1:4) finished smooth to RCC surface to all floors finished smooth including closed deep chipping and slurry treatment with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge
13.62
2973
218.3
Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receie materials labour T&P etc. complete including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
55.14
5150
93.4
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC (12mm Cement Plaster)
88.52
7515
84.9
Priming one coat to wall surface using water bound cement primer including cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC (16mm Cement Plaster)
55.14
4532
82.2
Painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approed shade with cost conveyance taxes of all materials and cost of all labour T&P etc.complete as per the specification and direction of the EIC
55.14
6153
111.6
Finishing wall with weather coat paint two coats with any approved quality of weather seal coat over a coat of priming on new work to gibe an even shade including cost of all materials labour T&P required for the work etc.complete as per the specification and direction of the EIC
88.52
9445
106.7
Providing fitting and fixing of M.S. door, window with grills, Grills made out of M.S. Angle frame M.S. Flat sheet etc. grill for window, ventilator etc. complete with all cost conveyance taxeswith all labour T&P sundries etc. of all materials complete in all respect as per specification and direction of the Engineer-in-Charge
78.44
5945
75.8
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
2.52
9553
3791.2
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
3.24
19388
5984
Priming one coat with any approved primer (to receive Enamel paint) with cost of all labour, cess, T&P required for the work etc. complete in all respect as per the specification and direcction of the EIC
1.62
125
77.4
Painting two coats with approved enamel paint over a coat of primer to new wood/iron work with cost conveyance taxes of all materials and cost of all labour T&P etc.complete as per the specification and direction of the EIC
1.62
315
194.7
25mm thick grading concrete (1:2:2) with 6mm size hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing including cost conveyance, Royalty, Cess taxes of all materials, labour T&P articles required for the work etc. as per the specification and direction of the Engineer-in-charge.
15.39
6439
418.4
PH Work
Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (Initial lift up to 1.5mtr
8.85
2018
228.21
From 1.5mtr to 3.0 mtr depth
4.13
1011
244.97
Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C
0.88
421
476.7
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.88
4644
5253.9
Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.66
4915
7436.8
Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (in foundation and plinth (1:4)
4.1
19519
4763.2
In foundation and plinth (1:6)
0.1
436
4542.3
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (12mm thick Cement Plaster in CM (1:3)
14.2
2496
175.8
Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
13.24
456
34.5
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
2.7
1161
430.5
Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.31
3375
10854.1
Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.35
2602
7436.8
Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
5
842
168.4
Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
0.52
517
1000.6
Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
2
1280
640.1
Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
16.87
2640
156.5
Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
2.59
331
128.05
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. (Ground Floor)
9.73
11620
1194.9
First Floor
25.3
30811
1218.1
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. (Ground Floor)
41.38
51960
1255.7
First Floor
56.89
73336
1289.1
Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap(Hindware,Parryware,Cera) to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C
5
11316
2263.2
Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
5
2970
594.1
Supplying all materials, labour, T&P and fixing bowl pattern urinal(Hindware,Parryware,Cera) including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.
1
1676
1676
Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100/ 450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.
1
2756
2756
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter UPVC SWR Pipes
31
11541
372.3
110mm U-PVC SWR single junction floor
4
1434
358.7
110mm U-PVC SWR door bend
6
1228
204.7
110mm U-PVC SWR Offset
6
1083
180.5
110mm U-PVC SWR plain bend
6
1065
177.6
110mm U-PVC SWR vent cowl
6
520
86.7
75mm diameter U-PVC SWR pipes
15
3400
226.7
75mm U-PVC SWR door bend
4
491
122.9
75mm U-PVC SWR plain bed
4
436
109.2
125mm dia C.P. Grating
7
513
73.4
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. (375mm thick wall)
5
1218
243.7
250mm thick wall
5
960
192
Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4kg/cm2 soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and haunch top the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C.
4
4295
1073.9
Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4kg/cm2 soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.
2.5
5273
2109.3
Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.
1.5
2416
1610.9
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C
3
25898
8632.8
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
3
5038
1679.6
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.
3
35695
11898.4
Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
1
10141
10141.7
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
1
15433
15433.3
supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
20
3794
189.7
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. (15mm dia PVC pipes)
20
2822
141.1
25mm dia PVC pipes
30
6810
227
Supplying all materials, labour T&P and fitting and fixing of C.P Shower(jaquar) with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C (15mm x 150mm dia C.P. shower with arm)
2
1218
609.2
15mm dia C.P. Health Fcucet
5
6561
1312.2
Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (15mm dia CP Bib Cock)
1
1041
1041.5
15mm dia C.P. long body Bib Cock
3
4010
1336.8
15mm dia C.P. Two way angle/ Bib Cock
5
5700
1140
15mm dia C.P. Angle cock
12
10633
886.1
15mm dia C.P. conceated stop cock
2
3101
1550.5
15mm dia C.P. Pillar Cock
7
15467
2209.7
15mm dia C.P. nipple
11
645
58.7
15mm dia C.P. Flange
10
399
39.9
25mm dia Metal Full Way valve
2
2125
1062.7
Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware,Cera) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.
7
16629
2375.6
Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.
7
16480
2354.4
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.
7
4760
680
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C (20mmx450mm long CP towel rail)
6
4963
827.2
CP towel ring
7
2990
427.2
Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.
1
3085
3085.4
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
12
4304
358.7
Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge.
8.42
53161
6313.74
Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern(Hindware,Parryware,Cera) with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C
5
9590
1918
Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.
6.08
1386
228.21
Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C.
30
3960
132
Supplying and fitting & fixing of I.S.I make 2.0 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.
1
28500
28500
Supplying all labour,T&P and fitting & fixing of I.S.I make 2.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC.
1
1475
1475
Supplying and fitting & fixing of D.O.L starter for 2.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge.
1
2809
2809.32
Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge.
100
7170
71.7
Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge.
1
1660
1660
Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.
80
10560
132
Bore Well
Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 200mm dia bore- 0.00mtr to 30.00mtr
40
24648
616.2
Drilling of 150mm dia bore - 30.01mtr to 80.00mtr
100
61620
616.2
Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 200mm dia bore- 0.00mtr to 30.00mtr
40
4904
122.6
Cost of 200mm diad PVC pipes- 0.00mtr to 30.30mtr.
40.5
92214
2276.89
Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
1
4392
4392
EI Works
Recessed wiring to light point with 1.5sqmm FR PVC insulatd single core multistand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5Amp , 250V piano type Modular switch ISI marked and ceiling rose ISI Marked mounted on MS box having front Modular basr & cover of suitable size, MS box with 1.5 sq mm FR PVC insulated single core multistrand copper conductor and earth wire including all accessorie and connection as per direction of engineer in charge ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) (deducting the cost of S/F of 100mmx 100mmx60mm M.S.Box with bakelite cover - 1 no)
21
10445
497.41
-do- .... Light point Group B ( 1.1.2-1.24.2)
39
30811
790.03
-do- .... Light point Group C ( 1.1.3-1.24.2)
26
30201
1161.6
-do- .... Fan point Group B ( 1.1.2-1.24.2)
12
9480
790.03
-do- .... Fan point Group C ( 1.1.3-1.24.2)
5
5808
1161.6
-do- .... Call bell point Group B ( 1.1.2-1.24.2)
3
2370
790.03
Recessed wiring to Ex-Fan point in-do- .... Group B (1.1.3-1.24.2)
4
3160
790.03
-do- ....Exhaust fan point Group C (1.1.3-1.24.2)
4
4646
1161.6
S/F of Angle holder replacing Ceilling Rose
27
477
17.7
S/F of 5 amp Modular swith and 5A Modular socket out let of ISI marked on existing board (1.25.1 & 1.25.4)
16
3643
227.69
S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
14
10960
782.87
S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
11
7166
651.54
S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC
6
7608
1268.08
S/F of 1 no of 5 pin 15/16 amp. Socket with switch & 1 no of 15/16A top & 1 no of miniMCB, with 6 Modular metal box with modular base & cover in recess with suitable size of phenolic laminated sheet cover in fron with connection, painting etc as required for Inverter connection
2
2213
1106.8
SIFof 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of Recessed conduit as required. -do-2 Modular Box with base & cover
4
886
221.54
-do-4 Modular Box with base & cover
5
1344
268.83
-do-6 Modular Box with base & cover
5
1637
327.49
-do-8 Modular Box with base & cover
1
369
369.43
-do-12 Modular Box with base & cover
16
7712
482.02
Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.0sqmm ( 1.8 )
25
3892
155.69
-do- 2x1.5 +1x1.5sqmm ( 1.8.1 )
30
4701
156.71
-do- 2x2.5sqmm +1x1.5sqmm ( 1.8.2 )
302
51542
170.67
-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )
170
31966
188.04
-do- 4x6sqmm +2x4sqmm ( 1.8.11 )
90
28488
316.54
Inverter wiring (1x1.5smm) Copper wire (1.19.1)
150
7384
49.23
S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)
28
3740
133.6
S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads with MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)
8
6543
817.91
S/F of 'C' series TPN 4 pole MCB of 64A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box(2.6.4)
2
4954
2477
S/F of 6 way (6+18) TPN MCB DB double door (2.5.6)
2
5031
2515.99
Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
2
5063
2531.94
S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)
3
372
124.27
Supply, Installation,Testing and Commissioning of Exhaust fan of 300mm sweep in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make- USHA/ Orient / Almonard)
5
17047
3409.5
S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
6
8671
1445.23
S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL
44
31851
723.89
Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride )
15
48614
3240.94
Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)
3
23606
7868.74
S/F of 400mm A.C. wal fan with 5A socket on a 100mm×100mm×60mm MS bos (Make:Usha-Mist air/Crompton-wmhiflo wave /Havels-swing)
1
3298
3298.71
S/F step type fan regulator
17
5488
322.83
S/F of electronic 9w Watt LED Bulb
22
3732
169.65
S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
17
4461
262.43
S/F of Oval shaped portico lamp(Make: Bajaj/Philips/crompton/Hvels)
1
2162
2162
SITC of Luminous tall tubular inverter battery 150 AH & 1100 VA Inverter(Exide/Luminus/Crompton/Vguard)
1
29000
29000
Provision of Armoured cable size 3 1/2 x35sqmm (25)
40
10240
256
Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) &100A kitkat & bus bar
2. 63 A four pole MCB (Legrand/Seimens/L&T/C&S)- 3nos 3. 63A DP MCB- 1 no , 63 A TPN Onload Changeover- 1 no
4. Digital Volt meter & Ameter three phase 5. All accesories & Connection (Rating & Danger borad)
1
42539
42539
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements