Rural Development Department Tender

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 800 & 900 of MoRD etc. complete as per the direction of the Engineer-in-charge

Foundation

Sub Structure

Providing and laying reinforced cement concrete R.C.C. grade M-25 including centering, shuttering, compacting by vibrators watering, curing finishing the exposed surface smooth with cost conveyance royalty of all materials etc. complete as per drawing and Techinical Specifications and as per direction of Engineer in Charge.

Abutment Cap

Parapet, Deck Slab & Wearing Coat

Dirt Wall

Providing HYSD reinforcement for RCC works including bending bindingand placing in position for finished item work as per drawings and Technical Specification and as per direction of Engineer in Charge.

Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100mm dia AC pipes extending through full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing & Technical Specification and as per direction of Engineer-in-Charge.

Providing and laying boulder apron for bed protection with granite broken stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and Technical Specifications Clause 1301 of MORD and as per direction of the Engineer in charge

Providing & laying of fiter media with stone crushed aggregates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MoRTH specification to a thickness of not less than 600mm withg smaller size towards the soil & bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Techinical Specifications and as per direction of Engineer in Charge.

Providing and fixing 20mm thick compressible fiber board in expansion joint complete as per drawing and technical specifications including cost convyance taxes of all materials, cost of all labours, T & P required for the work etc.complete and as per direction of the Engineer -in- charge.

Dismantling and removing R.C.C.columns beams slab staircaseanding lintels including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling & removing Stone Masonery in Cement motrtar including cost of all labour, T&P etc complete as per direction of EIC

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.