Puri Konark Development Authority Tender

Filling the mounds (Maximum height1.5mtrs) with available excavated earth in layers including loading and unloading with all cost conveyance ,T&P sundtries etc. Complete as per direction of engineer in charge volume of earth required to be refilled as per contour survey

Providing and laying pre- cast C.C. Kerb stones in 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone including centering, shuttering etc aggregate 20 mm nominal size) complete including setting in position.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing in position 3 seater designer Bench of approved design and make of minimum area of 1.5mtrsx0.60mtr overall minimum height 0.80 m consisting of 1. FRP channel strip-seat and back with end cap (C section of thickness upto 5mm,1200mm long with wooden finish bolted to side frames) 2. BENCH FRAME (Cast iron of approved design )

Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site manure from compost plant under Municipality area from approved source, including carriage up to 1 km (measurement on weight)

Rough dressing the trenched ground including breaking clods.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the ground

Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.

Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free fromweeds and fit for mowing including cost of grass and supplying good earth, if needed (the good earth shall be paid for separately).

In rows 5 cm apart in both directions

Grii hams high density Australian 50mm grass carpet for decerative palces

Providing & transplanting best quality healthy Trees species [Acacia nilotica (Babul), Alstonia scholaris (Devil's tree), Anthocephalus cadamba (Kadamb), Anogeissus latifolia (Axle wood), Artocarpus integrifolia (Jack fruit), Azadirachta indica (Neem), Bauhinia alba/ blakiana/ purpurea (Orchid tree), Bombax malabaricum/ cieba (Semal), Butea monosperma/ frondosa (Flame of the forest/ Palash), Callistemon lanceolatus (Bottle brush), Cassia fistula (Amaltas), Cassia siamea, Chorisia speciosa (Silk cotton tree), Cordia sebastina, Dalbergia sisso (Sheesham), Delonix regia (Gulmohur), Dendrocalamus strictus (Bamboo), Emblica officinalis (Aonla), Erythrina indica, Eugenia jambolana (Jamun), Ficus benjamina, Ficus elastica (Rubber), Ficus glomerata, Ficus religiosa (Peepal), Grevellia robusta (silver oak), Jacaranda mimosifolia, Lagerstroemia flos reginae/ speciosa, Madhuca indica (Mahua), Mangifera indica (Mango), Melia azardirachta, Michelia champaca, Milletia ovalifolia, Millingtonia hortensis, Mimusops elengii, Morus indica (Mulberry), Nyctanthes arbortristis, Ocimum americanum, Peltophorum ferrugineum, Plumeria obtusa, Polyalthia longifolia, Pterospermum acerifolium (Kanak champa), Samanea saman (Rain tree), Saraca indica (Sita ashok), Shorea robusta (Sal), Spathodea companulata, Tabebuia argentia/ avellandae/ rosea, Tamarindus indica (Tamarind), Tectona grandis (Teak), Terminalia arjuna, Terminalia chibula, Terminalia bellarica, Thevetia nerifolia, Ziziphus jujuba (Ber) or any other native/ drought tolerant species or as per the owner’s choice] of approx. height 2500mm (obtained from renowned nursery) in erect position and supported with bamboo stick without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including digging the tree pits (holes 1200 mm dia., 1200 mm deep) prior to planting and refilling the same with sweet earth mixed with manure 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete, All trees to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete. including watch & ward and watering etc of Nursery

Planting best quality pot-grown healthy Ornamental species [Agave spp., Bamboo buddha belly, Bismarckia nobilis, Cycas circinallis, Cycus revoluta, Furcarea watsoniana, Golden bamboo, Phoenix roebelenii, Phoenix sylvestris, Sansveira spp., Washingtonia robusta, Wodyetia bifurcata, Roystonea regia (Royal palm) or any other native/ drought tolerant species or as per the owner’s choice] of approx. height 1500-2500mm in erect position with minimum stem of species in erect position without breaking the earth balls around the roots, packing the reduction by 8%) along with

RECONSTRUCTION OF C.WALL

Earthwork in excavation for foundation in all kinds of soil (including stony earth and gravels mixed with stone & boulder) but excluding soft rock, hard rock & slushy soil upto 1.5m depth including leveling, dressing and consolidating the excavated surface, sorting of excavated earth into serviciable & unserviciable material, stacking of serviceable material within a lead of 50m and disposal of unservicable material as directed by Engineer In-Charge including supplying of all material, labour, tools and plants, etc. all complete as per specification and direction of Engineer In-Charge.

C.C. 1:3:6) using 40mm C.B.H.G. Metal under foundation incl centering shuttering etc as required

RCC works (1:1.5:3) using 12mm size CBHG chipos including centering and shuttering as required with supply of all materials,labour,T&P etc. Complete

Column

Plinth Beam

Top Beam

Column Superstructure

Fly ash brick masonary works in C.M.(1:6) using fly ash bricks of size 23cmx11cmx8cm incl. Supply of all materials, labour,T&P etc. Complete

Providing Reinforcement for RCC works incl. Cutting bending binding abd tying the grills in position for M.S. Or TOR steel using Fe 500 steel with supply of binding wire all materials,labour T&P etc. Complete

12mm thick cement plaster (i:6) over brick wall incl. Supply of all materials, labour,T&P etc. Complete

6mm thick cement plaster (i:4) over RCC surface incl. Close door chipping and slurry treatment incl. Supply of all materials, labour,T&P etc. Complete

Providing one coat of cement primer incl. Supply of all materials, labour,T&P etc. Complete

Providing two coats of weather coat of appd. Shade incl. Supply of all materials, labour,T&P etc. Complete

Providing fitting and fixing of M.sgrill fencing over top of wall as

Painting two coats with enamel paint of appd shade incl cost of all materials,labour T&P etc. Complete

Electrical Work

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2 X 1.5 sq mm + 1 X 1.5 sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm X 75mm)

8 Module (125mm X 125mm)

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting, suspenders etc as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing Copper tape PVC Covered tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing Copper tape PVC Covered tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 X 10 sq. mm (22mm)

3.5C X 95 sq. mm (45mm)

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

40 mm dia

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

50 mm Dia

100 mm dia

Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured cables of following sizes as per CPWD Specifications /other relevent IS/IEC, , datasheets, specification of this tender and directions of Engineer-in-Charge.Polycab Armoured

3 C x 10 sq. mm

3.5 C x 95 sq. mm

Supply and installation of Copper earthing Coil in each pole/pathway lights etc. as required, inlcuding Excavation and backfilling of earth, etc. , for a maximum depth of 2.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, connecting individual earth coil with lug of street light pole/ other structure , including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per Rural Electrification Codes, CPWD Specifications, other relevant codes, specification of this tender and the direction of the Engineer-in-Charge.

Supply and installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required, mounting, including all labour and materials, complete and as per applicable standards and CEA Guidelines and as per directions of Engineer-in-Charge.

First Aid Boxes.

Sand buckets with stand (Each with at least 3 sand buckets).

Shock hazard charts - Laminated type with 316 steel frames (As per drawing and specification)

Supply, installation, connection, testing and commissioning of 240 V AC, 1200 mm sweep ceiling fan with regulator (labeled as minimum 3-star by Bureau of Energy Efficiency)including providing clamp/hook in RCC slab, if necessary, providing, fixing, ceiling, rose, wiring, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (In entry point of security room)

Supply and fixing of 3 Phase outdoor type Panel Board of aaproximate size 4'-0" x 2'- 0" x 1'-0" (L x B x T) made of 16 SWG C.R sheet. The same is to be installed in a rigid cement concrete foundation with help of nut & bolt complete with two coats of approved paint i. e. D. A. grey. The Panel Board consisting of the following accessories.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.(As per drawing of laying and fitting)

80 mm dia

40 mm dia

Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, specifications of this tender and directions of Engineer-in-Charge.

Post Top Lantern (40 W LED decorative post (Mapple of Crompton Greaves (eg. LPTO-40-CDL) or equivalent) top of IP-65, housing pressure dicast, surge protection of 5 kV, outer dia. More than 50 mm. clear defuser, 50000 buring hours.

G.I. Earth pipe electrode with saltand charcoal . Earthing with G.I. Earth pipe 3mtrs long 40mm dia of ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangements and watering pipe etc. As required as per direction of engineer in charge

Sinking of 125mmx100mm size tube well through DTH or combination drilling rigs in hard rock areas with PVC/ GI casing pipe, labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs as required to suit the site condition as per the direction of the engineer in charge including use of own rigs with its accessories,tools,,plants and consumables etc. for for lowering 125mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft,medium ,hard and boulder formation (GI/PVC pipes if required to prevent collapse of over burden to be provided by the contractor including lowering and withdrawing after completion of the tube well etc. 1. 125mm dia - o mtr to 30 mtrs = 30mtrs 2. 125mm dia- 30mtrs to 37 mtrs= 7mtrs

Lowering the following size G.I./PVC pipe with or without slotted pipes as per the necessity from the ground level and and fitted and fixed up in perfectly vertical position ,including cutting and threading of pipes ,slotted piprs supplying and fixing of all jointing materials,T&P ec.complete and keeping the top of the casing pipe threaded including plugging tubewells to prevent entry of foreign materials from above

125mm dia- 0mtrs to 30 mtrs = 30mtrs

125mm dia - 30mtrs to 37 mts

Cleaning and developing the tubewell with their own comressor continuously worked till clear and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per direction of the engineer in charge

Supplying all materials,labour T & P and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition ,sanitary sealing upto 5 mtrs below ground level

Supply and installation of Submersible pump and motor (1HP flow rate 5m3/hr,differential head -40mtrs) with accessories and hardware(motor,duck foot bend,guide rails,baseplate, foundation bolt etc) including supply manufacturing assemble,transportation,testing and commissioning in all respect as per specification

Providing and fixing of rotational moulded polythylene cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and providing extra sockets and jam nuts,fixing ball valve etc. including hoisting upto a height of 5 mtrs above ground level and placing the tank to the required position etc. all complete as per specification of the engineer in charge

1000 ltrs capacity double layer cylindrical vertical water storage tanks

Providing and lying in trenches galvanised mild steel tubes (heavy duty) of 15mm dia conforming to IS 1239/2004 part-1 of the following nominal bore and tube fittings including testing as per specification complete (Earth work in trenches to be measured separately)

Supplying and fixing Brass or Gun metal full way valves conforming to IS 781-1995 of the following nominal size with wheel as per specification complete

5mm dia brass or gun metal full way valve

Supply,Installation ,testing and commissioning of bio-toilets of make Eram or equivalent including cost of all materials,conveyance,royalities,taxes ,cost of all materials,labour etc. Complete as directed by the engineer in charge