Public Health Engineering Organisation Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A & Special Class" Contractor.
Bid Capacity
... View More
The bid capacity required in the given tender is calculated using the formula: Assessed Available Bid Capacity = (A*N*2-B), where A = Maximum value of works executed in any one year during the last five years (updated to the current price level), B = Value of current price level of the existing commitments and ongoing works to be completed during the next years, and N = Number of years prescribed for completion of the works for which the bids are invited (Minimum value of N=1). The Assessed Available Bid Capacity should be ≥ Rs. 768.47 Lakh.
Technical Capacity
... View More
The bidder should have successfully completed civil work(s) valuing not less than Rs. 272.04 Lakh (30% of the estimated cost including GST) in any one year during the last 5 years. The completed civil work must cover at least one Drinking water Treatment plant with Rapid Gravity Filtration system (RGF) or sewage Treatment plant or septage treatment Plant or make well or Elevated service Reservoir / Ground storage Reservoir of capacity not less than 1.0 lakh litre. Additionally, the bidder should have annual financial turnover of not less than Rs. 362.72 Lakh (40% of the estimated cost including GST) in any one year in civil construction works during the last 5 years. The bidder should have a good working record of completion of works in time and should furnish a work completion certificate from an Engineer not below the rank of Executive/Superintending Engineer/equivalent in support of the work executed. The bidder should also have experience in laying of pipe or combination of any two or more, with a performance certificate from an appropriate authority. The value of the works completed should be at least Rs.768.47 Lakh. A weightage of 10% per year shall be given on the value of the completed work and annual turnover in the preceding years.
Costs
EMD
₹ 7,69,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHEO_109701_1Tender No
SEPHBLS-27 of 2024-25 Dt.15.01.2025Tender Authority
Public Health Engineering Organisation ViewPurchaser Address
-Website
http://https://pheoodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying all labour, t&p and Cutting Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge. A) Concrete road
273.54
1723
471446.19
... More
Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. A) In all kinds of soil
3216.78
291
938463.4
... More
Supply all labour, t&p and laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification with lead of all materials to site. A) 100mm dia DI (K7)
1239
40
50179.5
... More
150mm dia DI (K7)
324
62
20120.4
... More
200mm dia DI (K7)
1094
87
95725
... More
250mm dia DI (K7)
425
117
49937.5
... More
300mm dia DI (K7)
135
145
19656
... More
350mm dia DI (K7)
325
196
63960
... More
400mm dia DI (K7)
821
234
192524.5
... More
500mm dia DI (K7)
11
308
3393.5
... More
Supplying all materials, labour, t&p and fixing of the following sizes of Ductile Iron fittings & Specials confirming to IS Specificationwith lead of all materials to site. A) For 100mm to 300mm dia Material Cost
41.32
15654
646830.72
... More
For 350mm to 500mm dia Material Cost
43.45
16623
722297.59
... More
Supplying all materials, labour, t&p and making push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification with lead of all materials to site. A) 100mm diameter
226
179
40476.6
... More
150mm diameter
59
250
14773.6
... More
200mm diameter
199
299
59660.2
... More
250mm diameter
78
299
23384.4
... More
300mm diameter
25
317
7927.5
... More
350mm diameter
60
447
26832
... More
400mm diameter
150
447
67080
... More
500mm diameter
2
505
1010.6
... More
Supplying all materials, labour, t&p and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia with lead of all materials to site. A) 110mm dia M.S.Pipe (4 mm thick)
120
804
96488.4
... More
100mm dia M.S. Flange.(12mm thick)
10
1027
10276.8
... More
100mm dia offset Bend
5
5355
26775
... More
219.1mm dia M.S.Pipe (6.30mm thick)
100
2804
280470
... More
200mm dia M.S. Flange.(12mm thick)
10
1541
15413.7
... More
200mm dia offset Bend
5
10850
54250
... More
Supplying all materials,labour and T&P and making flanged joints for P.V.C./G.I pipes and specials of the following diameter including testing of joints as per specification all complete. A) 100mm dia MS flanged joints
10
386
3863
... More
200mm dia MS flanged joints
10
634
6346
... More
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
110.28
1135
125189.86
... More
Supplying all materials, labour, T&P and Welding with two welding beads/pass, conforming to IS:816-1998 to MS pipes and fittings at site with lead of all materials to site.
110.28
2566
283077.73
... More
Supplying all materials,labour, T&P and Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.6(IS 14846/2000) with double flanged ends for water works purpose for the following rating & nominal diameters (Make-VAG/Talis/AVK. A) 100mm dia
1
25951
25951
... More
200mm dia
1
65590
65590.2
... More
400mm dia
1
226995
226995.4
... More
Supplying all materials, labour, t&p and constructing brick masonry chamber sluice valve chamber with Fly ash bricks and providing cement concrete (1:4:8) with 40mm size hgcb metal in foundatin bed brick work CM (1:3) with brick work having crushing strength not less than 75 kg/cm2 with 12mm cement plaster (1:3) on both side including providing ,R.C.C cover slab of 100 mm thick in cement concrete(1:1.5:3) using 20mm and down graded h.g. c. b chips and 10mm dia MS rod spacing 125mm c/c and refilling the sides with the excavated earth including watering and ramming with lead of all materials to site. A) Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
3
22797
68391
... More
supplying all labour, t&p and filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
2863.18
162
464064.21
... More
Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site., as per direction of Engineer-in-charge
205.23
897
184276.02
... More
Supplying all materials, labour, T&P and providing Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal with lead of all materials to site..
136.82
6544
895391.13
... More
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips with lead of all materials to site.
136.82
8131
1112497.1
... More
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
695.65
278
193947.22
... More
Compound Wall For Zone -3 ESR (120 m):- Single under reamed pile foundation with RCC (1:1.5:3) using 12 mm bhg CB chipse including cost of boring and excluding cost of M.S/Tor steel and labour charges for cutting, bending and binding of steel. etc completed and as per direction of EIC . A) 250 mm dia and 3 mtr long single under reamed pile
80
3129
250352
... More
Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of EIC .
7.49
291
2185.13
... More
Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C.
3.74
897
3358.15
... More
Supplying all materials, labour, T&P and providing brick work with F.A. bricks having c.s. not less than 75kg/cm2 with dimensional tolerance ± 2% including watering, curing conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. A) In F&P (1:6)
8.74
5566
48646.84
... More
In Super Structure (1:6)
49.4
5595
276412.76
... More
Supplying all materials, labour, T&P and providing Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal with lead of all materials to site all complete as per direction of EIC.
3.74
6544
24475.68
... More
Supplying all materials, labour, T &P and providing C.C M-25 using 20mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C.
17.51
7079
123969.05
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.
31.28
8582
268448.09
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. A) Foundation & Plinth
48.24
247
11929.75
... More
Above plinth
73.44
1186
87114.53
... More
G. Beam
60
1186
71172
... More
Slab
19.2
753
14469.12
... More
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.
614.4
189
116674.56
... More
Supplying all materials, labour, T&P and providing cement punning including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.
144
40
5846.4
... More
Supplying all materials, labour, T&P and providing and fixing M.S. Grill gate with M.S. framed over all size including frame 1830 mm height X 910mm width made out of the following materials confirming to relevant I.S. specification, Hinges size: 100 mm - 6 Nos including conveyance of all materials to worksite, payment specification and direction of E.I.C.
262
110
28820
... More
Supplying all materials, labour, T&P and providing and painting two coats with enamel paint over a coat of primer to iron works for Back gate & Front gate etc. complete as per direction of E.I.C.
19.64
263
5165.32
... More
Supplying all materials, labour T&P and priming 1 coat with any approaved primer including cost of primer & labor etc. all complete as per specification and direction of E.I.C.
470.4
81
38149.44
... More
Supplying all labour T&P, materials and finishing wall with weather paint of approve shade on new work two coats to give an even shade including cost of brushes and putty with cost of paint and direction of E.I.C.
470.4
99
46757.76
... More
CC Approach Road 30 Mtrs. Long with 4 Mtrs. Width:- Supplying all materials, labour, t&p and filling soil in foundation and plinth, well watered and rammed with lead of all materials to site., as per direction of Engineer-in-charge
74.25
550
40859.78
... More
Supplying all materials, labour, t&p and Construction of granular sub-base by providing Coarse graded Grading-II material as per Table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
27
3208
86628.42
... More
Supplying all materials, labour, t&p and laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications.
33.75
3522
118897.2
... More
Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site.
12
6544
78531.6
... More
Supplying all materials, labour, t&p and providing cement concrete M20 using 20 mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site.
24
7102
170469.6
... More
HOUSE SERVICE CONNECTION ZONE-3:- Supplying of materials, labour & T & P for providing New House Connections to beneificiaries from PHE Deptt/WATCO CI/DI pipe line to the property of beneificiaries/ Repair of House connection with extention of service etc. including earthwork excavation, cutting of concrete, Metal BT road, refilling the trenches & making good to the damage road to CC (1:2:4) after completion of the work, lifting of excess excavation materilas/ debrisis from work site & disposed within 5 km radious by mechanical transport, fixing 1/8" dia brass / GM ferrule with following dia composite strap saddle in the CI/DI pipe line, cutting holes in bricks / stone /RCC masonary work, repair the broken holes, cost of UPVC schedule - 80 pipe (25mm/20mm dia up to 7 m/ 10m respectively) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of engineer in charge. A) With 100 mm dia Distribution main
595
4644
2763180
... More
With 150 mm dia Distribution main
396
4687
1856052
... More
Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPE pipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.complete as per site condition & ditrection of Engineer in charge.
991
192
190668.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements