Public Health Engineering Organisation Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
The bid capacity required in the given tender to bid is calculated using the formula: Assessed Available Bid Capacity = (A*N*2-B) Where:
A = Maximum value of works executed in any one year during the last five years (updated to the current price level)
B = Value of current price level of the existing commitments and ongoing works to be completed during the next years
N = Number of years prescribed for completion of the works for which the bids are invited (Minimum value of N=1) The assessed available bid capacity should be ≥ Rs.623.83 lakh.
Technical Capacity
... View More
The required prior work experience for the bidder is not explicitly stated in terms of years, but the bidder needs to have a total number of years of experience in Construction Work. The bidder is required to provide a list of similar works executed during the last 5 years, which includes details such as the name of the work/location, agreement number and date, name of the employer, value of the contract price (excluding GST), total value of work executed (including GST), and financial year-wise computed amount (including GST). However, the exact percentage or value of similar works completed is not specified. The bidder must provide information on the approximate value of existing commitment and ongoing works. The bidder is also required to demonstrate having experience and resources sufficient to meet the aggregate of the qualifying criteria for the individual contracts. A summary of the work experience of each key staff shall be attached. Additionally, the bidder's experience in construction works is to be provided for each of the last five financial years, including total annual turnover and total turnover in construction works. The value and percentage of similar works completed are not explicitly mentioned, but the bidder needs to provide certification from the employer and a self-declaration in support of the claim. The bidder whose contract(s)/agreement(s) have been rescinded under PHEO/WATCO/RWSS during the last two years prior to the date of invitation of the tender shall not be eligible to participate in the bidding process. The bidder needs to calculate the Assessed Available Bid Capacity using the formula (A x N x 2 - B) ≥ Rs. 623.83 lakh, where A is the maximum value of works executed in any one year, N is the number of years prescribed for completion of the work (which is 1.5 years), and B is the value of existing commitments and ongoing works. The minimum annual turnover in construction works, including GST, for each of the last five financial years is required, but the exact percentage or amount is not provided.
Costs
EMD
₹ 6,23,825Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHEO_111460_1Bid Award Id
ViewTender No
SEPHBGR 31/2024-25Tender Authority
Public Health Engineering Organisation ViewPurchaser Address
-Website
http://https://pheoodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Proposed ESRat Zone -4 ( 3.5 Lakh Litre)
Staging - 25m
350000
35
12264000
... More
Supply, installation, testing & commissioning of DI Pilot Altitude flow Control valve of DOUBLE CHAMBER (Globe Type) with orfice plate for propose to close valve at maxium water level of ESR & open the refill the ESR AT LOWER ALTITUDE Control valve should be worked at minimum pressuer 1kg/cm². An altitude control valve control at level of a tank .The altitude valve will remain open while the tank is not full and it will close when the ntanks reaches its maximum level. The opening & closing the valve will work without external power soures (electric,pneumatic or man power ). It will work automatically. The body, Spool & Cover will be DI ASTM A- 536 standard, Spring, steam, Jam nut, Cover bolt, & cover waser shouuld be SS, DI/SS Diaphragm plate Nytrill/Nylon diaphragm, Brozen cover bushing, Seat plate & ring . The Approved make : (VAG/SINGER/ BURMAD-700/DORT-S300 ) with 2 nos solenoid including cost of all materials with all taxes transportion to site /Storage with insurance as per the direction of Engineer-in-charge. Size- 200mm dia
4
336828
1347312
... More
Construction of RCC framed structure Watchmen Shed of size (4x3) Sqmt including internal electrification all complete as per specification and direction of EIC.
108
16080
1736643.24
... More
Supplying Electromagnetic flow meter of following diameters with 3 years warranty including software application (Application:The bidder has to provide/develop an application in the platform of LINUX/WINDOWS, PHP, SQL/my SQL SERVER, JAVA Script, HTML CSH, AJAx, J-Query on cloud) etc. Data will be transmitted through GSM/GPRS service). The bidder should provide documents like operational manual, design document & devioce application and al the credentials parameters for approval before procurement of device. Area Classification-weather proof, Electronics-Remote, MOC electronics enclouser-Die cast AL, Cable entry-1/1" NPT, Power supply 80-300VAC, Output-4-20mA, Accuracy:+0.5% all complete as per the specification and direction of Engineer-in-charge. Size - 200mm dia ESR Inlet
4
172173
688692
... More
Supply with fitting and fixing of D.I. Mechanical joint for use to main uninterrupted water supply in the pipeline in case of repair of Flow meter/valve as per specification and as per direction of Enginer - in - charge. 200 mm dia
4
12571
50284
... More
Laying of Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 with cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter including transportation from store yard to work site as per specification complete and as per the direction of Engineer-in-charge.
100mm dia DI (K7)
493
27
13389.88
... More
150mm dia DI (K7)
1505
40
60516.05
... More
200mm dia DI (K7)
670
53
35570.3
... More
250mm dia DI (K7)
91
117
10722.53
... More
Cutting asphalt or bituminous road of flexible pavments / Concrete road and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.(For Zone-2&4)
Bituminous road
46.06
980
45152.62
... More
Concrete road
153.54
1726
265010.04
... More
Supplying all labour, T&P for earth work excavation in all kinds of soil within initial lead of 50m & initial lift of 1.50m including rough dressing, breaking clods and laying in layers not exceeding 0.30m. in depth, levelling the bed, including sundries supervision charges & labour cess etc as per direction of Engineer-in-charge.
1579.8
293
462944.59
... More
Supplying, fitting and fixing of the different sizes Ductile Iron fittings & Specials confirming to IS Specification including cost of materials, transportation etc all complete as per direction of Engineer-in-charge. For 100mm to 250mm dia size
Material Cost
32.82
15350
503790.28
... More
Laying Cost (labour only)
32.82
305
10023.23
... More
Construction of Thrust Block of RCC M-20 with reinforcement of size( 1.00 x 1.00 x 1.00m)(for 100mm to 250mm size pipe) including earthwork,sand filling of 100mm thick,CC (1:4:8) of 150mm thick,M20 cocrete base 200mm thick and height 1mtr ,centering and shuttering all complete as per the direction of Engineer-in-charge.
6
13687
82124.4
... More
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification all complete and as per the direction of Engineer-in-charge. (Labour Only)
100mm diameter
99
179
17800.2
... More
150mm diameter
301
251
75671.4
... More
200mm diameter
134
301
40347.4
... More
250mm diameter
18
301
5419.8
... More
Supplying & Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters (including cost of Sluice Valves) Make-VAG/Talis/AVK/Kirloskar/ Equivalent as per the direction of Engineer-in-charge.
100mm dia
1
25952
25952.4
... More
150mm dia
4
39052
156209.2
... More
200mm dia
2
65592
131185.8
... More
Supplying all materials,labour and T&P for constructing brick masonry chamber as per P.H. specification and design all complete including earthwork,CC (1:4:8) of 150mm thick,230mm thick FA bickwork (1:4), Cement plaster(1:3),centering and shuttering, 100mm thick RCC M20 Cover Slab with steel reinforcement,earth filling all complete as per specification and direction of Engineer-in-charge. Size (0.75mx0.75mx1.485m)for 200 to 300mm dia
2
16376
32752.06
... More
Supplying all materials,labour and T&P for constructing brick masonry chamber as per P.H. specification and design all complete including earthwork,CC (1:4:8) of 150mm thick,230mm thick FA bickwork (1:4), Cement plaster(1:3),centering and shuttering, 100mm thick RCC M20 Cover Slab with steel reinforcement,earth filling all complete as per specification and direction of Engineer-in-charge.
Size (0.75mx0.75mx1.225m)of dia 100 to 150mm
5
14367
71836.5
... More
Supplying all materials,labour and T&P for laying of MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of Engineer-in-charge.
100mm dia M.S.Pipe (4.50mm thick)
8
836
6695.2
... More
100mm dia M.S. Flange.(10mm thick)
2
1027
2055.36
... More
100mm dia x 90°/45°M.S. Bend on site
4
5256
21024
... More
150mm dia M.S.Pipe (6.30mm thick)
24
1675
40221.6
... More
150mm dia M.S. Flange.(12mm thick)
4
1348
5394.88
... More
150mm dia x 90°/45° M.S. Bend on site
8
7950
63600
... More
200mm dia M.S.Pipe (6.30mm thick)
10
2805
28056
... More
200mm dia M.S. Flange.(12mm thick)
2
1541
3082.74
... More
200mm dia 90°/45° M.S. Bend on site
4
10864
43456
... More
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
6.93
1137
7884.26
... More
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld/fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete as per the direction of Engineer-in-charge.
13.87
2569
35632.03
... More
Supplying all materials,labour and T&P for making flanged joints for C.I./DI/MS pipes and specials of the following diameter including testing of joints as per specification all complete as per the direction of Engineer-in-charge.
100mm dia Flange joints
2
386
773.2
... More
150mm dia Flange joints
4
583
2334.4
... More
200mm dia Flange joints
2
635
1270
... More
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
725.6
162
118127.68
... More
Filling in foundatin and plinth with sand watered and rammed including cost of sand , labour,royalty,lead all complete as per as per the direction of Engineer-in-charge.
798.3
566
452556.27
... More
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes,cost of conveyance, royalty, sundries, watering for curing, supervision charge,T & P etc all complete as per the direction of Engineer-in-charge.
99.79
5882
586994.72
... More
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge etc. all complete as per the direction of Engineer-in-charge.
99.79
7505
748933.93
... More
Removing & re-fixing of precast cement concrete interlocking paving blocks of all sizes over 50 mm thick course sand bedding (duly compacted) including filling of joints with sand complete in all
respect including cost of all taxes,lead,royalty as per the direction of Engineer-in-charge.
376.71
241
90787.11
... More
Providing and fixing of 80mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having M40 grade. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand.Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in charge. The rates to be inclusive of cost of all taxes,lead,royalty & Lifts etc. all complete as per specifications as per the direction of Engineer-in-charge.
161.45
608
98226.18
... More
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
1053.8
278
293799.44
... More
Boundary wall
Supplying all labour, T&P for earth work excavation in all kinds of soil within initial lead of 50m & initial lift of 1.50m including rough dressing, breaking clods and laying in layers not exceeding 0.30m. in depth, levelling the bed, including sundries supervision charges & labour cess etc as per direction of Engineer-in-charge.
45.93
293
13459.33
... More
Filling in foundatin and plinth with sand watered and rammed including cost of sand , labour,royalty,lead all complete as per as per the direction of Engineer-in-charge.
5.1
566
2891.19
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision, conveyance of all materials to worksite, royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
5.1
5882
29999.73
... More
R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken Granite chips all complete as per direction of Engineer-in-charge.
33.28
6043
201140.99
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including all taxes,Conveyance of all materials to Work site, royalty, labour cess etc all complete as per specification and direction of Engineer-in-charge. For Foundation and Plinth
189
247
46777.5
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including all taxes,Conveyance of all materials to Work site, royalty, labour cess etc all complete as per specification and direction of Engineer-in-charge. For column
113.4
1189
134866.62
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, labour cess etc all complete as per specification and direction of Engineer-in-charge.
26.62
8791
234027.07
... More
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, labour cess etc, all complete as per the direction of Engineer-in-charge.
73.91
5507
407044.54
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, labour cess as per the direction of engineer-in-charge.
396
185
73339.2
... More
Supplying all materials, labour, T&P and making 16mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of Engineer-in-charge.
396
267
105890.4
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
15.31
162
2492.47
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
792
81
64468.8
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, labour cess etc all complete as per the direction of Engineer-in-charge
792
99
78962.4
... More
Leaf MS/SS Gate fixed with RCC Pillar
Supplying all labour, T&P for earth work excavation in all kinds of soil within initial lead of 50m & initial lift of 1.50m including rough dressing, breaking clods and laying in layers not exceeding 0.30m. in depth, levelling the bed, including sundries supervision charges & labour cess etc as per direction of Engineer-in-charge.
10.38
293
3041.76
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
0.87
566
493.2
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision, conveyance of all materials to worksite, royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
0.87
5882
5117.6
... More
Supplying all labour, materials, T&P and providing Cement concrete (1:1½ :3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty, sundries, watering, curing &lifting & laying concrete at a height of 5 mtr. Maximum, labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
6.06
6043
36626.03
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including all taxes,Conveyance of all materials to Work site, royalty, labour cess etc all complete as per specification and direction of Engineer-in-charge. For Foundation and Plinth
14.52
247
3593.7
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including all taxes,Conveyance of all materials to Work site, royalty, labour cess etc all complete as per specification and direction of Engineer-in-charge. For column
21.6
1189
25688.88
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, labour cess etc all complete as per specification and direction of Engineer-in-charge.
4.76
8971
42703.86
... More
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment all complete as per specification and direction of Engineer-in-charge.
21.6
208
4505.76
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
3.45
162
561.66
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
21.6
81
1758.24
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, labour cess etc all complete as per the direction of Engineer-in-charge
21.6
99
2153.52
... More
Supplying all materials, labour, T&P and Fitting & Fixing of SS Gate including cost of conveyance, labour cess etc., all complete as per the direction of Engineer-in-charge i) Leaf SS Gate (size 6.0m x 1.8m Ht)- 3Nos.
972
130
126360
... More
ii) Leaf SS Gate (size 1.3m x 1.8m Ht)- 3Nos.
210.6
130
27378
... More
Approach road
Supplying all materials, labour, T&P and filling up road surface with borrow earth 1mtr form the approved quarry and compacting to the required density with testing including cost of royalty, lead and trasportation and labour cess etc all completed as per specification and direction of Engineer in charge.
720
198
142819.2
... More
Construction of granular sub base by providing close graded material Gradding- VI, mixing in a machanical mix plant at OMC, carrage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density including cost of royalty, lead and trasportation and labour cess etc all complete as per MoRTH specification and direction of Engineer in charge.
153
2660
407074.86
... More
Providing, laying, spreading and comparcting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mixplant, carrage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRTH specification including cost of royalty, lead and trasportation and labour cess etc as per direction of Engineer in charge.
135
2466
333036.9
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision, conveyance of all materials to worksite, royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
48
5882
282350.4
... More
R.C.C work in ground floor of M-30 grade with 20mm to 10mm crusher broken hard Granite chips mixed by concrete mixer, laying in layers, compacting by vibrator with proper cambering and filling bern by excavated earth and leads and lift including frame work , cost of royalty, lead and trasportation and labour cess etc all etc as per specification and direction of Engineer-in-charge.
72
6453
464652
... More
Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from PHE Deptt. CI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC M 20 grade after completition of the work, lifting of excess excavated materials/ debris from work site & disposing within 5 KM radious by mechanical transport, fixing 15mm dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of MDPE 20 mm dia pipe up to 10 m, minimum 6m ) & MDPE compression joints, fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge.
In 100mm dia distribution main
77
4966
382401.25
... More
In 150mm dia distribution main
25
5016
125406.25
... More
Repair work Supplying, Fitting, fixing of composite SS saddle with EPDM rubber etc all complete as per direction of Engineer-In-Charge.
In 100mm dia distribution main
20
600
12000
... More
In 150mm dia distribution main
10
650
6500
... More
Supplying, Fitting, fixing and Laying of pipes UPVC Pipes all complete as per direction of Engineer-In-Charge.
20mm
70
191
13407.1
... More
25mm
65
281
18305.95
... More
Supplying, Fitting, Refixing damaged brass / GM Ferrules all complete as per direction of Engineer-In-Charge.
30
863
25905.6
... More
Supplying, Fitting, fixing of UPVC Union all complete as per direction of Engineer-In-Charge.
20mm
100
60
6000
... More
25mm
100
78
7800
... More
Supplying, Fitting, fixing of UPVC brass FTA all complete as per direction of Engineer-In-Charge.
20mm
100
124
12445
... More
25mm
100
179
17963
... More
Supply of manpower consisting of 1 number of Semiskilled labour as a valve operator/watchman daily basis for 5 years O & M (Including contribution towards EPF, ESI, Labour cess, Contractors Profit & OH Charges but excluding cost of chemicals & Energy charges) including keeping sorrounding of ESR and premises clean,detection of leakages and mending and weather coating and display board writing if required and dectection of leakage, repair and maintenance of Distribution system and HHC under this project as per the instruction of Engineer-in-charge. Operation and Maintenance for five years as per scope of work and technical scope and direction of Engineer-in-Charge.
1
2622805
2622805.25
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements