Public Health Engineering Organisation Tender

250mm dia Nominal Diameter Flowmeter

400mm dia Nominal Diameter Flowmeter

Supplying all materials,labour, T&P for laying and fitting, fixing of intrenchs D.I/C.I specials of the following nominal diameter including testing of joint etc.complete as per direction of EIC.

100mm dia D.I.Socket Tail Pice

150mm dia D.I.Socket Tail Pice

250mm dia D.I.Socket Tail Pice

400mm dia D.I.Socket Tail Pice

100mm dia C.I. M.J.Collar

150mm dia C.I. M.J.Collar

250mm dia C.I. M.J.Collar

400mm dia C.I. M.J.Collar

Supplying all materials,labour,T&P for cutting of M.S / CI/ DI Pipe line work upto 4.5mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete.

S.V. chamber internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S/V.

S.V. chamber internal size:-[0.75x0.75x1.485mtr] for 200mm. to 300mm .dia. S/V.

S.V. chamber size:-[1.0x1.0x1.5mtr] for 400dia. S/V.

Supplying all labour mateials, T&P for fitting and fixing of 1.5mmsqr 4 Core Copper armmed cable wire etc as per direction of EIC (Make - Finolex/ havells/ polycab)

Supplying all labour mateials, T&P for fitting and fixing of 2.5mmsqr 6 Core Copper armmed cable wire etc as per direction of EIC (Make - Finolex/ havells/ polycab)

Pressure Transmitter for raw & pure water pumping station - Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement. (Ref-MJP Mech DSR 2023-24 page No. 115) Output 4-20 mA / HART, Power supply - 24V DC ext. Display - 4" LED, Accuracy - +/- 0.1 % of full scale or better & Enclosure- IP 68 (MAKE - WIKA/ SIEMSENS/ VEGA/ DANFOSS)

Ultrasonic level transmitter raddar type level transmeter for raw water pumping station Designing, Supplying, Installing, commissioning & testing of Ultrasonic Raddar type Ultrasonic level transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement. (Ref-MJP Mech DSR 2023-24 page No. 114) Output-4-20 mA / HART , Power supply - 24V DC ext. Display - 4" LED, Range- 0 to …30... Mtrs, Accuracy - +/- 0.25% of Full Scale or better & Enclosure- IP 68, Mounting - On PLC panel (Make E&H/ VEGA/ SIEMENS/ FORBES/ MARSHALL/ UWT)

Providing, erecting Electric Valve Actuator for non rising spindle type sluice valve of PN 1 & PN 1.6 rating, totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S2, insulation class "F" and temp rise restricted to class "B" with IP - 67 protection class suitable for DOL starting and with three thermostat and 30% over load margin. The torque rating of reduction gear box shall be atleast 1.5 times max. torque required for opening and closing of valve with integral starter for ON & OFF operation (VAG/ AVK/ TALIS/ SINGER/ HAWLW/ CLA) valve & (AUMA/ ROTORK/ SDTORK) actuator

200mm dia Flange end butterfly valve PN10

250mm dia Flange end butterfly valve PN10

Supply, Installation,Testing & Commissining of Variable Frequency Drives with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time. (55KW/75HP) at Intake (Make - Yaskawa/ Siemens/ Rockwell/ Danfoss)