Public Health Engineering Organisation Tender

63 KVA sub-Station

L.T. Line for 11 KV

3-Phase 50Sqm AB Cable

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and leveling the bed not exceeding 1.5mtr depth and depositing the soil within 50mtr initial lead as per specification approved by the Deptt.

Supplying all labour, T&P for dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres,stacking serviceable and unserviceable materials separately including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge

Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 cum in volume with in 50mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries , supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.

Supplying & Laying in trenches centrifugally Cast (Spun) Ductile Iron Pressure socket and spigot pipe Class-K-7 cement mortar lining confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge.(Earthwork in trenches, jointing of pipes,specials and fittings to be measured and paid for separately)(including cost of DI K-7 pipe with Tyton rubber Ring)

200mm dia D.I.K7 pipe

Providing Push-on-joints confirming to IS:3114-1994 to centrifugally (Spun) Cast Iron pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of S.B.R. quality including testing of joints,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-Charge.(Labour only)

200mm dia

Supplying & laying of diffrent size ERW M.S. Black Steel pipe conforming to IS specification:3589 for crossing drains,culverts and canals as per site requirement with fixing MS flanges of 12mm thick at both end including drilling holes for nut & bolt, grinding,polishing and fixing of M.S.flanges with pipe required gas cutting ,arc welding inside one layer & out side three layer,grinding ,polishing and providing flanged joints to M.S. Pipe & Specials including cost of rubber inseration ,Nut & Bolt flange & labour cess including testing of joints etc all complete and direction of the Engineer-in-Charge.219.10mm OD M.S.pipe

Supplying all materials, labour, T&P and Fixing Cast Iron Sluice Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following rating and nominal diameters as per specification complete(including cost of nut bolt ,washer,rubber inseration sheet& cost of C.I. Sluice valve (P.N.1.0)without wheel.

200mm dia Double Flanged C.I. Sluice valve (P.N.1.00)

Supplying of Ductile Iron specials of the following nominal diameter as per specification complete.

Supplying all labour, T&P and Laying in trenches of Ductile Iron specials of the required nominal diameter as per specification complete. (Earth work in trenches, jointing of pipes to be measured and paid separately) (Including cost of DI specials, fittings)

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,contractor profit & Labour cess etc all complete as per specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete( 1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty,contractor profit & Labour cess etc all complete as per specification and direction of Engineer-in-charge.

Supplying all labour, materials ,T&P and providing Cement concrete (1:1½:3) with crusher broken hard granite chips on 12mm size CC works including cost of conveyance & royalty ,sundries , watering ,curing &lifting &laying concrete at a height of 5mtr. Maximum,contractor profit & labour cess complete etc all complete

Supplying all labour, T&P and Filling in foundation and plinth with excavated materials including watering and ramming,contractor profit & labour cess as directed by the Engineer-in-charge

Supplying all materials ,labour,T&P and providing Cement concrete (1:1½:3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance& royalty ,sundries, watering ,curing &lifting &laying concrete at a height of 5mtr. Maximum complete etc all complete (Excluding cost of reinforcement But including cost of centering & shuttering)

Pillars (Base Footing)

Pillars (Superstructure)

Supplying all material, labours and T&P for cutting, placing, fitting and binding uncoted HYSD bar reinforcement complete as per drawing and technical specification including cost of HYSD bar & binding wire 18 to 20 gauge all complete as per specification and direction of Engineer-in-charge.

Constuction of Pump House of internal dimention 6.00m x 5.00m Mtr including internal electrification (1 no.)

Supplying all materials, labour, T&P and fitting & fixing and commissioning of the following Pump Set with all accessories.

Centrifugal PumpSets without Control Panel having (Head =50.00Mtr and discharge =33.33lPS)- 2nos 1 working+1 standby

Star Delta Control Pannel with APFC arrangement for above pump sets.

Main Switch (3 Phase) with MS frame & nut bolt etc. all complete 200Amp.

Out door control pannel empty Box made of MS Plate for energy meter

Supplying all materials ,Labour, T&P for crossing of 200mm MS/DI pipe line acrossing National Highway by Horizontal thrust boring method (In slope of 1 in 40 towards down stream) including encasing the pipe line by 400mm dia including excavation of push pit,dewatering if any,laying and jointing of casing and carrier pipe, caping and sealing casing pipe etc for carrier pipe and installation of sign board on either side of national Highway and direction of Engineer-in-charge and approved by National Highway department etc all complete.(Annexure-A)

Design, Supply, installation, testing & commissioning of packaged water treatment plant (uncoventional type) of 0.50 MLD capacity with (20 hour operation) comprising of Lamela Clarifier, Static Mixture Flocculation Tank(SMFT), Multigrade Filter (MGF) with Bestn quality filter media, Lime/Coagulant/polymer dosing system, hypochloride dosing system, raw water feed pump clear water transfer pump sludge transfer cum recirculation system, filter feed pump and back wash pump including all fittings and electrical power supply to the different suppiled units with MCB panel, internal electrification with lighting arrangement within treatment plant site with provision of chemical storage and water testing laboratory facility should be from a reputed water testing laboratory facility should be from a feputed manufacturer/authorised/ distributor/authourised dealer confirming to relevant IS Codes and certified by ISO-9001-2008 & 14001, it also includes cost of civil foundation interim clarified water tank inter connection pipe lines from raw water inlet to CWR and applying internal epoxy paint on the supplied equipment.

Provision for external and internal electrification of Pump house. Inside WTP pump house

Provision for approach road, Drain and internal road for pump House as per specification & direction of Engineer-In-Charge.

Supplying all labour, T&P and disposal of surplus earth by mechanical means within 5.00km lead including loading,unloading & labour cess etc all complete as per the direction of Engineer-in-charge.

Construction of boundary wall with SS Gate as specification and direction of Engineer-in-charge.