Public Health Engineering Organisation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 31,44,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Improvement Of Water Supply To Jajpur Town For Upgradation To 24x7 Water Supply System Including O And M For 5 Years Under Amrut 2.0 Swap-i
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHEO_101217_1Bid Award Id
ViewTender No
EICPH-18/2023-24 Dtd.07.02.2024Tender Authority
Public Health Engineering Organisation ViewPurchaser Address
-Website
http://https://pheoodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying all materials, labour, T&P and earth work in hard soil in approved burew area by nominal labour within 50 Mtrs lead and 1.5 lift & transportation by truck and loading the soil and carriage to work site upto 100 Mtrs breacking clods5 to 7 cm size and laying in layers not exceeding 0.3 m depth etc all complete as per the direction of Engineer-in-Charge
687.5
309375
450
... More
Construction of granular sub-base by providing Coarse graded Grading-II material as per Table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
318.75
692666
2173.07
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.(Latest Revision)
281.25
758565
2697.12
... More
P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification & direction of Engineer-in-Charge.
100
603510
6035.1
... More
C.C. M-25 Grade using 20mm & down grade crusher broken Granite chips crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (In foundation & plinth)
150
1042845
6952.3
... More
Rigid & smooth centering & shuttering for R.C.C. works including false work & dismantling them after casting including cost of materials, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (RCC Foundation)
125
29337
234.7
... More
Lightining Work at Intake Site (10 Nos.)
-
-
-
... More
Earth work in all kinds of soil within 50Mtr initial lead and 1.5Mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3Mtr in depth as per direction of Engineer-in-charge.
10
2282
228.21
... More
Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete.
1.5
9052
6035.1
... More
Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.
1.5
1034
689.9
... More
Supplying all materials, labour and T&P for Transportation of excavated material & disposing upto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge.
10
2787
278.77
... More
Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge.
3.94
32707
8301.4
... More
Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge.
14.88
132921
8932.9
... More
Supply, Installation, Testing Wiring & Commissioning of Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB- 3Nos, 10A DP MCB-1Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed as per electrical specification and as per direction of EIC.
1
14966
14966
... More
Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 Mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings
10
189092
18909.22
... More
Supplying fitting & fixing of Single arm Bracket of 1.0 Mtr length suitable for fixing in 70mm top yard lighting octagonal smart pole
10
37876
3787.65
... More
Supplying all materials labour & T & P for fitting & fixing of the following electrical installations / power supply cable including earth work excavation etc. complete as per direction of Engineer in charge.
-
-
-
... More
Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B)
12
5846
487.23
... More
Connector suitable for 4Sqmm For yard lighting Pumping station Premises
52
470
9.05
... More
2.50 Sqmm 4 core copper armoured Cable including laying
211
79369
376.16
... More
Supplying fitting & fixing of 32 mm dia GI pipe of 1.0 m long duly welded with MS plate as base plate & making hole in the base plate for fixing of anchor bolt including cost of anchor bolt etc. Complete.
4
5600
1400
... More
Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass & with option of secondary optic with IP66 protection 45 Wt LED light .(Preferable HALONIX make Freedom LUNos - SUPER l Cat No.HLSLD-15-45-CWL-R)
12
60000
5000
... More
Supply fitting & fixing of following materials for Yard Lighting arrangement inside Pumping station campus etc complete..
-
-
-
... More
19 mm Service Cable Gland
32
1518
47.45
... More
2.5 mm copper cable socket
128
759
5.93
... More
RAW WATER PUMPING MAINS (DI K9 500 mm Dia 3000 Mtr)
-
-
-
... More
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately
337.5
539628
1598.9
... More
Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 Mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
101.25
80838
798.4
... More
Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 Mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
236.25
133268
564.1
... More
Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.
3712.5
847229
228.21
... More
Laying in trenches of ISI Marked Centrifugally Cast (Spun) K - 9 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes, including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.
3000
839400
279.8
... More
Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket]
500mm dia Push-on-joints
545
217019
398.2
... More
Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)
172.5
2856468
16559.24
... More
Fixing DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK/ Kirloskar/AUDCO/IVC
500mm dia D/F Sluice Valve (PN1.6)
10
3958074
395807.4
... More
Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
10
22607
2260.7
... More
Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.
500mm dia MJ Socket
25
826915
33076.6
... More
Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.
-
-
-
... More
1.20m x 1.20m x 1.20m ( deep) for 500mm dia SV Chamber
10
266714
26671.44
... More
Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge.
351
242154
689.9
... More
Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.
263.25
1588740
6035.1
... More
Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.
175.5
1324165
7545.1
... More
Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.
3008.25
381385
126.78
... More
Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.
1379.25
384493
278.77
... More
Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve. (VAG /Talis Make/Audco/Kirloskar)
100mm dia Tamper proof Duojet Air Valve
10
292842
29284.2
... More
12 MLD WTP & SITE DEVELOPMENT.
-
-
-
... More
Design, Drawing , Construction, Cummissioning & Testing of 12.0 MLD capacity Conventional WTP with Cascade aerator, Raw water channel, Chemical house, Chemical store, Dosing arrangements, /Chlorinator, Flash Mixer, Rapidmix, HBCF, Settling Tank/ Clariflocculator, RGF, bye pass channel, filter house & back wash arrangement with pump, CWR,Clear water pump house, Lab, Administrative Block, internal road & lighting, internal drainage arrangement, internal electrification /Arboriculture etc., all Cumplete as direction of EIC (Excluding cost of clear water pumps, external electrification, automation & instrumentation and sludge treatment) .
-
-
-
... More
12 MLD WTP
1
67567014
67567014
... More
Boundary Wall (Length - 300 m x 1.8 m Height with 2 Nos. SS 304 Grade Gate)
-
-
-
... More
Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 Cum in volume with in 50Mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
69.99
15972
228.21
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
7.8
5381
689.9
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
7.8
47073
6035.1
... More
Supplying all labour, materials, T&P and providing Cement concrete M 20 with crusher broken hard granite chips on 20mm size down grade chips RCC works including cost of conveyance & royalty, sundries, watering, curing & lifting & laying concrete at a height of 5 Mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
52.95
346965
6552.7
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
Column Base, Column Base upto Plinth, Plinth Beam, Beam on Wall Top
306
71818
234.7
... More
Column
172.8
176601
1022
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge
42.36
378397
8932.9
... More
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge.
124.2
620652
4997.2
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
681
106440
156.3
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
660
103158
156.3
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
23.34
2959
126.78
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
1341
91858
68.5
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
1341
114923
85.7
... More
RCC Pillar with SS 304 Grade Gate
-
-
-
... More
Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 Cum in volume with in 50Mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
6.92
1579
228.21
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
0.58
400
689.9
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
0.58
3500
6035.1
... More
Supplying all labour, materials, T&P and providing Cement concrete M20 with crusher broken hard granite chips on 20mm sizedowngrade chips RCC works including cost of conveyance & royalty, sundries, watering, curing &lifting & laying concrete at a height of 5 Mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
4.02
26341
6552.7
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
Column Base, Column Base upto Plinth
9.68
2271
234.7
... More
Column
1.8
1839
1022
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
3.22
28763
8932.9
... More
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment
7.2
1244
172.9
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
2.3
291
126.78
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
7.2
493
68.5
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
7.2
617
85.7
... More
Supplying all materials, labour, T&P and Fitting & Fixing of SS 304 Grade Gate including cost of conveyance, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge
-
-
-
... More
2 Leaf SS Gate (Size 6.0 M x 1.8 M Ht.) @ 30 KG/Sqm
648
84240
130
... More
1 Leaf SS Gate (Size 1.3 M x 1.8 M Ht.) @ 30 KG/Sqm
140.4
18252
130
... More
Lightning work for Approach Road (10 Nos.)
-
-
-
... More
Earth work in all kinds of soil within 50Mtr initial lead and 1.5Mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3Mtr in depth as per direction of Engineer-in-charge.
10
2282
228.21
... More
Supplying all materials labour & T & P for cement concrete 1:3:6 using 40mm size hard black granite metal including watering curing etc. complete.
1.5
9052
6035.1
... More
Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.
1.5
1034
689.9
... More
Supplying all materials, labour and T&P for Transportation of excavated material & disposing upto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge.
10
2787
278.77
... More
Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge.
3.94
32707
8301.4
... More
Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge.
14.88
132921
8932.9
... More
Supply, Installation, Testing Wiring & Commissioning of Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB- 3Nos, 10A DP MCB-1Nos, All switchgear and controlgear make- Siemens, schneider, ABB, L&T, LEGRAND. All completed as per electrical specification and as per direction of EIC.
1
14966
14966
... More
Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 Mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings
10
189092
18909.22
... More
Supplying fitting & fixing of Single arm Bracket of 1.0 Mtr length suitable for fixing in 70mm top yard lighting octagonal smart pole
10
37876
3787.65
... More
Supplying all materials labour & T & P for fitting & fixing of the following electrical installations / power supply cable including earth work excavation etc. complete as per direction of Engineer in charge.
-
-
-
... More
Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B)
12
5846
487.23
... More
Connector suitable for 4Sqmm For yard lighting Pumping station Premises
52
470
9.05
... More
2.50 Sqmm 4 core copper armoured Cable including laying
211
79369
376.16
... More
Supplying fitting & fixing of 32 mm dia GI pipe of 1.0 m long duly welded with MS plate as base plate & making hole in the base plate for fixing of anchor bolt including cost of anchor bolt etc. Complete.
4
5600
1400
... More
Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass & with option of secondary optic with IP66 protection 45 Wt LED light .(Preferable HALONIX make Freedom LUNos - SUPER l Cat No.HLSLD-15-45-CWL-R)
12
60000
5000
... More
Supply fitting & fixing of following materials for Yard Lighting arrangement inside Pumping station campus etc complete..
-
-
-
... More
19 mm Service Cable Gland
32
1518
47.45
... More
2.5 mm copper cable socket
128
759
5.93
... More
CC Approach Road (50M Length x 4 M Width)
-
-
-
... More
Supplying all materials, labour, T&P and earth work in hard soil in approved burew area by nominal labour within 50 Mtrs lead and 1.5 lift & transportation by truck and loading the soil and carriage to work site upto 100 Mtrs breacking clods5 to 7 cm size and laying in layers not exceeding 0.3 m depth etc all complete as per the direction of Engineer-in-Charge
137.5
61875
450
... More
Construction of granular sub-base by providing Coarse graded Grading-II material as per Table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
63.75
138533
2173.07
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.(Latest Revision)
56.25
151713
2697.12
... More
P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification & direction of Engineer-in-Charge.
20
120702
6035.1
... More
C.C. M-25 Grade using 20mm & down grade crusher broken Granite chips crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (In foundation & plinth)
30
208569
6952.3
... More
Rigid & smooth centering & shuttering for R.C.C. works including false work & dismantling them after casting including cost of materials, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (RCC Foundation)
25
5867
234.7
... More
CLEAR WATER PUMPING MAINS
-
-
-
... More
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately
1678.87
2684345
1598.9
... More
Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 Mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
387.52
309395
798.4
... More
Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 Mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
516.15
291160
564.1
... More
Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.
12997.56
2966173
228.21
... More
Laying in trenches of ISI Marked Centrifugally Cast (Spun) K - 9 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes, including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
250mm dia DI Pipe (K-9)
5884
640767
108.9
... More
350mm dia DI Pipe (K-9)
923
162817
176.4
... More
450mm dia DI Pipe (K-9)
50
12875
257.5
... More
500mm dia DI Pipe (K-9)
6412
1794077
279.8
... More
Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket]
-
-
-
... More
250mm dia Push-on-joints
1070
253162
236.6
... More
350mm dia Push-on-joints
168
59152
352.1
... More
450mm dia Push-on-joints
10
3982
398.2
... More
500mm dia Push-on-joints
1166
464301
398.2
... More
Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)
-
-
-
... More
DI Special (100mm to 300mm)
160.84
2507458
15589.77
... More
DI Special (350mm to 600mm)
371.2
6146789
16559.24
... More
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/ Talis/ AVK/ Kirloskar/ AUDCO/ IVC
-
-
-
... More
250mm dia D/F Sluice Valve (PN1.6)
6
538282
89713.8
... More
350mm dia D/F Sluice Valve (PN1.6)
2
375534
187767.4
... More
450mm dia D/F Sluice Valve (PN1.6)
2
567811
283905.9
... More
500mm dia D/F Sluice Valve (PN1.6)
2
791614
395807.4
... More
Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
... More
250mm dia
12
10833
902.8
... More
350mm dia
4
5064
1266.1
... More
450mm dia
4
8551
2137.8
... More
500mm dia
4
9042
2260.7
... More
Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.
-
-
-
... More
250mm dia MJ Socket
24
242647
10110.3
... More
350mm dia MJ Socket
8
151720
18965.1
... More
450mm dia MJ Socket
8
221334
27666.8
... More
500mm dia MJ Socket
8
264612
33076.6
... More
Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.
-
-
-
... More
1.20m x 1.20m x 2.00m ( deep) Sluice Valve Chamber
12
320057
26671.44
... More
Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge.
1653.11
1140480
689.9
... More
Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.
1239.84
7482558
6035.1
... More
Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.
826.56
6236477
7545.1
... More
Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.
10214.75
1295026
126.78
... More
Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.
5365.35
1495698
278.77
... More
Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve. (VAG /Talis Make/Audco/Kirloskar)
100mm dia Tamper proof Duojet Air Valve
25
732105
29284.2
... More
Construction of RCC ESR
-
-
-
... More
Design, Supply, Construction, Testing & Commisioning of Elevated Service Reservoir (ESR) with Pile/ Raft foundation for following capacity & staging height at 25 Mtr for all work such as soil investigation, excavation, back filling & disposal of earth, RCC & PCC of required grade, shuttering, brick work, painting, finishing, connection pipes beyond tank structure 15 Mtr for each pipe, valves fitting, expansion joint, expansion below, mechanical level indicator lightening arrestor including supply of all labours, materials T & P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
RCC ESR of 900000 Ltrs. Capacity at Zone-4 with 25 M Staging Height
1
28152000
28152000
... More
Supply, installation, testing & commissioning of DI Pilot Altitude flow Control valve of DOUBLE CHAMBER (Globe Type) with orfice plate for propose to close valve at maxium water level of ESR & open the refill the ESR AT LOWER ALTITUDE Control valve should be worked at minimum pressuer 1kg/cm². An altitude control valve control at level of a tank .The altitude valve will remain open while the tank is not full and it will close when the ntanks reaches its maximum level. The opening & closing the valve will work without extranal power soures (electric,pneumatic or man power ). It will work automatically. The body, Spool & Cover will be DI ASTM A- 536 standard, Spring, steam, Jam nut, Cover bolt, & cover waser shouuld be SS, DI/SS Diaphragm plate Nytrill/Nylon diaphragm, Brozen cover bushing, Seat plate & ring . The Approved make : (VAG/SINGER/ BURMAD-700/DORT-S300/ AVK ) with 2 Nos solenoid including cost of all materials with all taxes transportion to site /Storage with insurance.
200mm dia
2
882760
441380
... More
Boundary Wall with Gate for ESR & GSR (Length 200m x 1.8m with SS 304 Grade Gate 2 Sets each )
-
-
-
... More
Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 Cum in volume with in 50Mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
46.66
10648
228.21
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
5.2
3587
689.9
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
5.2
31382
6035.1
... More
Supplying all labour, materials, T&P and providing Cement concrete M 20 with crusher broken hard granite chips on 20mm size down grade chips RCC works including cost of conveyance & royalty, sundries, watering, curing & lifting & laying concrete at a height of 5 Mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
35.3
231310
6552.7
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
Column Base, Column Base upto Plinth, Plinth Beam, Beam on Wall Top
204
47878
234.7
... More
Column
115.2
117734
1022
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge .
28.24
252265
8932.9
... More
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge.
82.8
413768
4997.2
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
454
70960
156.3
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
440
68772
156.3
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
15.56
1972
126.78
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
894
61239
68.5
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
894
76615
85.7
... More
RCC Pillar with SS 304 Grade Gate
-
-
-
... More
Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 Cum in volume with in 50Mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
6.92
1579
228.21
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
0.58
400
689.9
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
0.58
3500
6035.1
... More
Supplying all labour, materials, T&P and providing Cement concrete M20 with crusher broken hard granite chips on 20mm sizedowngrade chips RCC works including cost of conveyance & royalty, sundries, watering, curing &lifting & laying concrete at a height of 5 Mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
4.02
26341
6552.7
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
Column Base, Column Base upto Plinth
9.68
2271
234.7
... More
Column
1.8
1839
1022
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
3.22
28763
8932.9
... More
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment
7.2
1244
172.9
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
2.3
291
126.78
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
7.2
493
68.5
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
7.2
617
85.7
... More
Supplying all materials, labour, T&P and Fitting & Fixing of SS 304 Grade Gate including cost of conveyance, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge
-
-
-
... More
2 Leaf SS Gate (Size 6.0 M x 1.8 M Ht.) @ 30 KG/Sqm
648
84240
130
... More
1 Leaf SS Gate (Size 1.3 M x 1.8 M Ht.) @ 30 KG/Sqm
140.4
18252
130
... More
Construction of RCC GSR
-
-
-
... More
Design, Supply, Construction, Testing & Commisioning of Ground Service Reservoir (GSR) with Pile/ Raft foundation for following capacity for all work such as soil investigation, excavation, back filling & disposal of earth, RCC & PCC of required grade, shuttering, brick work, painting, finishing, connection pipes beyond tank structure 15 Mtr for each pipe, valves fitting, expansion joint, expansion below, mechanical level indicator lightening arrestor including supply of all labours, materials T & P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
RCC GSR of 900000 Ltrs Capacity at Zone-3
1
5625000
5625000
... More
Supply installation testing & commissioning of Float Control valve to the fixed in UGR/OGR to shutup the incoming flow after filled up the reservoir & open automatically when water receeds in a particular level etc. complete as per direction of Engineer in charge
2
136400
68200
... More
DISTRIBUTION NETWORK OF JAJPUR TOWN
-
-
-
... More
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately
-
-
-
... More
65% CC Road
1509.96
2414275
1598.9
... More
15% Bituminous Road
348.45
278202
798.4
... More
20% Metalled Road
464.6
262080
564.1
... More
Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.
8638.75
1971449
228.21
... More
Laying in trenches of ISI Marked Centrifugally Cast (Spun) K - 7 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes, including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.
-
-
-
... More
100mm dia DI Pipe(K-7)
3779
131131
34.7
... More
150mm dia DI Pipe(K-7)
4426
236791
53.5
... More
200mm dia DI Pipe(K-7)
4806
365736
76.1
... More
250mm dia DI Pipe(K-7)
2660
273182
102.7
... More
300mm dia DI Pipe(K-7)
508
64719
127.4
... More
Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.
-
-
-
... More
100mm dia Push-on-joints
687
97073
141.3
... More
150mm dia Push-on-joints
805
159068
197.6
... More
200mm dia Push-on-joints
874
206788
236.6
... More
250mm dia Push-on-joints
484
114514
236.6
... More
300mm dia Push-on-joints
92
23000
250
... More
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
... More
100mm dia MS Pipe 4.5 mm thick
350
286090
817.4
... More
100mm dia M.S. Flange.(10mm thick)
35
35968
1027.68
... More
100mm dia x 45' M.S. Bend
35
88865
2539
... More
150mm dia MS Pipe 6.3 mm thick
440
723360
1644
... More
150mm dia M.S. Flange.(12mm thick)
40
53948
1348.72
... More
150mm dia x 45' M.S. Bend
40
129222
3230.55
... More
200mm dia M.S.Pipe (6.30mm thick)
450
1243620
2763.6
... More
200mm dia M.S. Flange.(12mm thick)
42
64737
1541.37
... More
200mm dia x 45' M.S. Bend
42
219954
5237
... More
250mm dia M.S.Pipe (6.30mm thick)
250
857975
3431.9
... More
250mm dia M.S. Flange.(12mm thick)
20
41104
2055.22
... More
250mm dia x 45' M.S. Bend
20
129380
6469
... More
300mm dia M.S.Pipe (7.10mm thick)
20
92074
4603.7
... More
300mm dia M.S. Flange.(12mm thick)
20
56519
2825.98
... More
150mm dia Equal MS A/F Tee
40
567320
14183
... More
Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)
324.67
5061530
15589.77
... More
Supplying all labour and T&P for flame cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
587.71
590766
1005.2
... More
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by fillet welding & genetator set including pocket cutting and welding complete.
587.71
1445649
2459.8
... More
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/ Talis/ AVK/ Kirloskar/ AUDCO/ IVC
-
-
-
... More
100mm dia D/F Sluice Valve (PN1.6)
8
207035
25879.4
... More
150mm dia D/F Sluice Valve (PN1.6)
9
350592
38954.7
... More
200mm dia D/F Sluice Valve (PN1.6)
10
654525
65452.5
... More
250mm dia D/F Sluice Valve (PN1.6)
5
448569
89713.8
... More
300mm dia D/F Sluice Valve (PN1.6)
1
122704
122704
... More
Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
... More
100mm dia
18
6633
368.5
... More
150mm dia
20
11262
563.1
... More
200mm dia
21
12902
614.4
... More
250mm dia
10
9028
902.8
... More
300mm dia
10
9543
954.3
... More
Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.
-
-
-
... More
1.20 m x 1.20 m x 1.20 m ( deep) for 100mm to 300 mm dia SV
33
880157
26671.44
... More
Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc all complete as per specification and direction of Engineer-in-charge.
1512.07
1043177
689.9
... More
Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.
1134.05
6844105
6035.1
... More
Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.
756.03
5704321
7545.1
... More
Supplying all materials, labour, T&P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.
7133.93
904439
126.78
... More
Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.
3827.83
1067084
278.77
... More
Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve.(VAG /Talis Make/Audco/Kirloskar)
-
-
-
... More
80 mm dia Tamper proof Duojet Air Valve
75
1854502
24726.7
... More
HOUSE SERVICE CONNECTION OF JAJPUR TOWN (210 Nos.)
-
-
-
... More
Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from PHE Deptt./ WATCO CI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completition of the work, lifting of excess excavated materials/ debrises from work site & disposing within 5 KM radious by mechanical transport, fixing 1/8" dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0Mtr /10 Mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge.
-
-
-
... More
House hold connection for replacement of Distribution Network (Considred)
-
-
-
... More
With 100mm dia distribution main with saddle
42
150486
3583
... More
With 100mm dia distribution main without saddle
63
187929
2983
... More
With 150mm dia distribution main with saddle
42
161448
3844
... More
With 150mm dia distribution main without saddle
63
201222
3194
... More
Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPE pipe up to 1.0 Mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.complete as per site condition & ditrection of Engineer in charge.
210
40404
192.4
... More
Pumping Unit (VT Pump / Centrifugal Pump, Piping , Valve etc.)
-
-
-
... More
Intake Pump House
-
-
-
... More
SITC of approved make V.T pump set of given capacity and head with VFD compatible, TEFC squirrel cage solid shaft induction motor working on 3- Phase 50 Hz ± 5%, 415 V ± 10%, complete set as per relevant IS and following material of Construction: Impeller with wearing ring CF8M, Shaft with sleeve S.S., Casing- C.I., Column pipe - M.S, Base frame M.S With 1 No. Stand by
-
-
-
... More
Total 70HP -2 Nos (1 W+ 1S) Duty of each pump set-Q=167 lps and H= 24m
140
2120599
15147.14
... More
ATS Control pannel suitable for above pump sets-2 Nos
140
489454
3496.1
... More
Pressure Gauge-200 mm: Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.
2
15000
7500
... More
Sluice Valve-200 mm dia : Non rising spindle type S/V as per IS 5312 Part-I PN 1.6 rating flanged end with by pass arrangement Kirloskar / Vag/ Audco/ Talis/ AVK/ IVC
2
130905
65452.5
... More
NRV-200 mm dia Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends. (PN 1.6)
2
95912
47956.1
... More
Electromagnetic Flow meter 500 mm dia : Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm 1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 Mtrs built in GSM/GPRS ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based ontechnical specifications (ABB, Krone, Immersion, Bermad, E & H/ SBEM)
1
427190
427190
... More
Mechanical Dismantled Joint-500mm dia
1
55211
55211
... More
Clear Water Pump House at 12.0 MLD WTP
-
-
-
... More
Providing, erecting and giving test of Centrifugal pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block.
-
-
-
... More
Total 100HP-3 Nos (2 W+1S)
Duty of each pump set- Q=75 lps, H= 77m
300
2796486
9321.62
... More
Supplying all labour, T&P, procurement and installation of VFD for each Clear Water pumpset, required PLC, pressure switch to the common header, actuator delivery valve for each pump, testing and commissioning all complete with ancillary materials such as cables,connectors ,etc and allied works.(MAKE/BRAND/MANUFACTURER And the Corresponding Model/Product/size integration and compatibility shall be as per direction of Engineer-In-Charge)
-
-
-
... More
Supply of Max 60-90 KW VFD and its installation in Existing electrical control panel.
3
2664000
888000
... More
PLC/SCADA System for Clear Water Pump House
Supply, Installation, Testing,Programming, Wiring & Commissioning of PLC panel Made out of 2 MM C.R sheet, PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman) Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 Nos, DC powered Transistor/Relay based 24DI and 16DO Ethernet PLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4Ch Analog Output module - 8 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 'C.10'' W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense, Schneider, Allen Bradly). Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 36 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- Wago, Schneider, Siemense, Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router - 1 Nos (make- Robustel, Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 96. 1.5 mm Terminal block for Digital Output - 36Nos. (Make- Wago, Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago, Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos,1 HMI ( Make- Wago, Phoenix Contact, Siemens, Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB - 50 Nos.(Make- Wago, Phoenix Contact, Connectwell), 2/4/6 Amp AC/DC MCB- 6Nos All switchgear and controlgear make- Siemens, schneider, ABB, L&T. All completed as per electrical specification and as per direction of EIC.
DI 96 , DO36 , AI16 , AO8
1
345460
345460
... More
Actuator Sluice Valves-250 mm dia
3
716250
238750
... More
Pressure Gauges: Providing, erecting and testing pressure gauge of 250 mm Dia dial with (0-10kg/cm2) required range with over pressure limit of 130% of full scale and accuracy of ± 2.0% of FSD. complete with Syphon tube, isolating 2V3(2 valve 3 way) gauge cock suitable for 12 mm seamless SS tubing of ss316 grade and specials all complete as per detailed specifications and drawings.
3
22500
7500
... More
NRV-250 mm dia Kirloskar / Vag/ Audco or equivalent make Cast Iron, Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends. (PN 1.6)
3
228334
76111.5
... More
Sluice Valve-250 mm dia : Non rising spindle type S/V as per IS 5312 Part-I PN 1.6 rating flanged end with by pass arrangement (Kirloskar / Vag/ Audco/ Talis/ AVK/ IVC)
3
269141
89713.8
... More
Pressure transmitter - Supply, installation, testing & commissioning of Pressure Transmitter with display having a range of 0 to 10kg/cm2 with required accessories like suitable pressure rated inline 2 valve SS manifold with 1/2" NPT process connection and having 4-20mA output along with HART protocol for interfacing with PLC/RTU and with an over pressure limit of 130% of full scale and accuracy of ±0.065% of FSD. The tubing to be provided with SS316 grade seamless SS tubing with required isolation ball valves and other required accessories for proper functioning of the transmitter.
1
20000
20000
... More
Electromagnetic Flow meter 500 mm dia : Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm 1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 Mtrs built in GSM/GPRS ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications (ABB, Krone, Immersion, Bermad, E & H/ SBEM)
1
427190
427190
... More
Mechanical Dismantled Joint-500mm dia
1
55211
55211
... More
Zone-1 and Zone-3
-
-
-
... More
Providing, erecting and giving test of Centrifugal pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block
Zone-1, 40 HP-3 Nos (2W+1S)
Duty of each pumpset: Q=20 lps, H=105m
120
1118594
9321.62
... More
Zone-3, 40 HP-3 Nos (2W+1S)
Duty of each pumpset: Q=19 lps, H=110m
120
1118594
9321.62
... More
Star Delta Control Pannel with APFC for Zone-3 suitable for above pump sets-3 Nos( 2W+1S)
120
279687
2330.73
... More
Supplying all materials, labour T&P for Construction of RCC pump foundation base including fiXing of base plate for installation of centrifugal pump as per approved specification and direction of Engineer in charge.
-
-
-
... More
Earth work in excavation of all kind of soil
11.25
2567
228.21
... More
C.C (1:3:6) with 4cm C.B H.G metal
1.13
6819
6035.1
... More
Sand filling
1.13
779
689.9
... More
R.C.C (1:1.5:3) with 12mm size C.B.H.G chips
7.5
62260
8301.4
... More
M.S. reinforcement for R.C.C. work
6.75
60297
8932.9
... More
Steel plate centering & shuttering for R.C.C work
25
16922
676.9
... More
Supplying & fixing M.S Channel section 75mm /100mm size including fabrication.
100
6150
61.5
... More
Fixing of 25mm dia 600mm foundation steel nut & bolt with cost of fabrication.
12
3000
250
... More
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
... More
250mm dia M.S.Pipe (6.30mm thick)
200
686380
3431.9
... More
250mm dia M.S. Flange.(12mm thick)
24
49325
2055.22
... More
250mm dia x 45' M.S. Bend
24
155256
6469
... More
300mm dia M.S.Pipe (7.10mm thick)
400
1841480
4603.7
... More
300mm dia M.S. Flange.(12mm thick)
35
98909
2825.98
... More
300mm dia x 45' M.S. Bend
35
278320
7952
... More
350mm dia M.S.Pipe (8.00mm thick)
300
1698000
5660
... More
350mm dia M.S. Flange.(16mm thick)
20
69364
3468.2
... More
350mm dia x 45' M.S. Bend
20
185940
9297
... More
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
37.02
37212
1005.2
... More
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete
60.14
147932
2459.8
... More
Supplying all materials Labour & T & P for Fixing Ductile Iron Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .
Make-VAG/Talis/AVK/ Kirloskar/AUDCO/IVC
-
-
-
... More
250mm dia D/F Sluice Valve (PN1.6)
6
538282
89713.8
... More
300mm dia D/F Non Return Valve (PN1.6)
8
821399
102674.9
... More
Supplying all materials, labour.t & p and wiring in existing surface/ conduit with insulated single core 35mm2 multistand copper conductor as required.
200
132046
660.23
... More
Supplying all materials, labour and T&P and fixing to walls or ceiling and floor galvanised mild steel tubes conforming to( IS.1239 Part-1), the following nominal diameter and fittings and clamps including making good to the damages including testing as per specification all complete.
-
-
-
... More
65mm. dia G.I. pipe
400
238484
596.21
... More
External Electrification :
Supplying all materials, labour T&P for complete installation and commissioning of sub-station structure as per OERC guideline
-
-
-
... More
Construction of plinth mounted D.S.S with 160mm x 152mm WPB 11 Mtr long pole and 11/0.4KV Transformer having Tap Changer BIS Energy level II including Road Cross Guarding 1 span & three phase service connection with lead of all materials to site as per TPCODL specification.
-
-
-
... More
11 kv Line with 160x160 mm GI Pole
2000
2600000
1300
... More
External power supply with installation of 250 KVA Transformer (work will be executed as per estimate received from TPCODL Jajpur Town
-
-
-
... More
Supply, Erection & Installation with all required material 350 KVA Transformr at WTP
1
1048660
1048660.16
... More
Supply, Erection & Installation with all required material 250 KVA Transformer at Intake
1
838928
838928.39
... More
Supplying all materials, labour T&P for complete installation and commissioning of sub-station structure as per OERC guideline
1
94379
94379.43
... More
Substation Building of size for 350 KVA/250 KVA and above transformers for 2 Nos Sub-stations with internal electrification.
30
482400
16080.03
... More
Supplying all materials, labour, t&p and fixing 4 Tonne Capacity EOT crane of Capacity including installation, testing & commissioning with lead of all materials to site..
1
500000
500000
... More
Supply, Installation, Testing Wiring & Commissioning of for 380 KVA/160 KVA Silent DG set with AMF panel including PLC Compactible, AMF Cum Manual changeover pane required cable from DG to AMF & AMF to main control panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated aluminium BusBar and interconnection with copper wire and lugs. Having 200A changeover -1 Nos, AC1 Rating 200A 4Pole Power Contactor-2Nos, 12VDC Auxilary contactor 2No+2NC- 5Nos, On delay Timer-2 Nos, ATS relay -1 Nos, 4A sp MCB-6, 10A DP MCB 2Nos, 4A FP MCB-2 Nos, BAsic Multifunctionmeter-1 Nos, CT200/5A -3, Auto/Manual Selector Switch -2Nos, Start /Stop Push Bottom Switch -1set, RYB indicator- 6Nos, ON/OFF Indicator-5, 2.5MM control Terminal- 10 Nos, All switchgear and controlgear make Siemens, schneider, ABB, L&T, LEGRAND including arthing arrangements, RCC Base foundation and canopy arrangements all complete as per electrical specification and as per direction of EIC.
-
-
-
... More
380 KVA Silent DG Set
1
4270800
4270800
... More
160 KVA Silent DG Set
1
1825200
1825200
... More
Crossing of Pipe Line at River length and Canal Crossing, Crossings Culverts
-
-
-
... More
Pile Foundation for 200 m Length of Bridge
-
-
-
... More
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-35 of 600mm diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap)
1476
6892447
4669.68
... More
Providing and laying Plain cement concrete of M 20 grade in levelling course for foundation below pile cap as per drawing and Technical Specifications Section 1500,1700, 2100 & 2200
8.12
53207
6552.7
... More
Providing and laying reinforced cement concrete of M35 grade for pile cap , abutments, pier , caps and Columns including centring and shuttering all complete as per drawing and Technical Specifications Nos 1500, 1700, 2100, 2200 & 2300.
414.02
2933538
7085.5
... More
Providing, Cutting, Bending and Fixing of TMT reinforcement (TMT bars) Fe 500 for Retaining walls foundation, Structure complete as per Drawings and Technical Specifications Section 1600
41.4
3698220
89329
... More
Providing , fabrication and erection MS structural Steel as super structure including fabrication, fixing in position and weather proof coating as per drawing and relevant technical specifications and as directed by the Engineer.
75.38
10288013
136482
... More
Providing and fixing M.S. Railing on the deck slab including fabrication, fixing in position and weather proof coating as per drawing and relevant technical specifications and as directed by the Engineer.
400
579680
1449.2
... More
Pile Foundation for 85 m Length of Bridge
-
-
-
... More
Single under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.
36
293932
8164.8
... More
Pile Cap-M35
4.5
31884
7085.5
... More
Pier/Column-M35
18
127539
7085.5
... More
Pier Cap-M35
7.2
51015
7085.5
... More
MS Plate
12.81
1748334
136482
... More
Ms Pipe hand railing
170
246364
1449.2
... More
Steel
2.97
265307
89329
... More
Pile Foundation for 150 m Length of Bridge
-
-
-
... More
Single under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.
64
522547
8164.8
... More
Pile Cap-M35
8
56684
7085.5
... More
Pier/Column-M35
32
226736
7085.5
... More
Pier Cap-M35
4.8
34010
7085.5
... More
MS Plate
22.61
3085858
136482
... More
Steel
4.48
400193
89329
... More
Ms Pipe hand railing
300
434760
1449.2
... More
Pile Foundation for 60 m Length of Bridge
-
-
-
... More
Single under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.
28
228614
8164.8
... More
Pile Cap-M35
3.5
24799
7085.5
... More
Pier/Column-M35
14
99197
7085.5
... More
Pier Cap-M35
18
127539
7085.5
... More
MS Plate
9.04
1233797
136482
... More
Steel
3.55
317117
89329
... More
Ms Pipe hand railing
120
173904
1449.2
... More
Pile Foundation for 16 m Length of Bridge
-
-
-
... More
Single under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.
28
228614
8164.8
... More
Pile Cap-M35
3.5
24799
7085.5
... More
Pier/Column-M35
14
99197
7085.5
... More
Pier Cap-M35
18
127539
7085.5
... More
MS Plate
2.41
328921
136482
... More
Steel
3.55
317117
89329
... More
MS Pipe hand railing
32
46374
1449.2
... More
Construction of RCC Thrust Block of size 1.50 x 1.50 x 1.30m
25
1087539
43501.59
... More
O/M cost for 5 Years (Manpower & Material GST & Contigencies inclusive)
-
-
-
... More
Operation & Maintenance of PH Installations for Five Years as per Scope of Work and Technical Scope and direction of Engineer-in-Charge. (Excluding Cost towards Chemicals and Energy Charges)
1
21380616
21380616.45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements