Public Health Engineering Organisation Tender

Supply, Installation, Commissioning and testing LT power cables of Polycab make unarmoured copper cable 35 sqmm single core, (Make- Havells, Polycab/Finolex)

Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete.

Supplying all materials, labour and T&P etc. and filling in foundation and plinth with sand, well watered and rammed including transportation of all materials to site and as directed by the Engineer-in-charge, all complete.

Supplying all materials, labour and T & P etc. and providing cement concrete (1:3:6) using 40mm size hard granite metal, as per specification and direction of the EIC, including transportation of all materials to site, all complete. (Mending good damages of road).

Supplying all materials, labour and T&P etc. and providing M-15 Cement Concrete ( 1:2:4 ) including hoisting and laying using 12mm size hard granite crusher broken chips, including transportation of all materials to site and as directed by the Engineer-in-charge, all complete.

Fitting & fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete

Supplying all materials labours and T&P etc and providing, MS angles including fabricating, fitting, fixing etc including transporting of all materials to site and as directed by the Engineer in charge all complete. 50 mm x50 mmx6 mm

Supplying all materials, labour and T & P etc. and fixing Cast Iron Sluice Valve with double flanged ends & cost of Nut, Bolt, Rubber insertion etc. for water works purposes for the following rating and nominal diameter as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 300 mm dia. CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately For Laying of armoured cable

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 150mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 250mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice valve Chamber (1.2mx1.2mx1.0m)

Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete. MS Pipe cost 300 mm dia. (5.6 mm thick)

MS pipe cutting

MS pipe welding

Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete. 300 mm dia.

Cost of fittings 300 mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC)

300 mm dia. Socketed Tail piece

Cost of MS Flanges 300 mm dia. MS Flange