Projects And Development India Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,13,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PDIL_746882_1Bid Award Id
ViewTender No
PNPM/PC-183/E-601/NCBTender Authority
Projects And Development India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
"Supply , taking over" as defined in the specifications, handling, loading/unloading, transportation, unloading and Laying of bare/coated line pipes and other materials like valve, fittings, flanges & TPI inspection etc. from Contractors suppliers locations/works etc. to Contractor's stock yard/workshop/work-site including preliminary activities, preparation of drawings, wherever required for crossing etc. Handling, stacking, stringing of the UG pipes, Carrying out inspection of materials including line pipes at the time of laying/ installation of line pipes, associated valves, tees, insulating joints, flanges & fittings for buried application of all sizes, thickness & ANSI class rating and accessories as per specification wherever required depending on site condition.Arrangement of all additional lands required for Contractor's storage, fabrication, access for construction, etc. procurement and supply of all materials, consumables, equipment, labour and other inputs, carrying out all temporary, ancillary, auxiliary works, etc.
-
-
-
... More
FOR A/G PIPING:
-
-
-
... More
Complete works for Supply of pipes, flanges, fittings & Valves for aboveground installation including all taxes, duties, transportation and inspection charges & TPI inspection, but not limited to, the following items in accordance with PMS (piping material specification), relevant specifications & drawings indicated in job specification and instructions of Owner/Consultant and as per all provisions of the CONTRACT. Supply of all piping items inclusive of spares (For details refer PDIL-MTO as well as SOR).
Supply & Transportation of all piping materials from storage point to work site/shop including from shop to work site, cleaning, stacking, prefabrication / fabrication at shop. In case of IBR piping, material identification, drawing approval, hydro-test witness and final approval of fabricated piping by IBR authorities for taking the same in use, shall also be included in the quoted rate.
-
-
-
... More
SUPPLY OF PIPING ITEMS
-
-
-
... More
PIPE SCH 80, PE ,0.5",SMLS,API 5L GR.B,ASME B36.10
2046
-
-
... More
PIPE SCHXXS, BE IBR,0.75",SMLS,ASTM A335 GR.P22,ASME B36.10
30
-
-
... More
PIPE SCH160, PE IBR,0.75",SMLS,ASTM A106 GR.B,ASME B36.10
174
-
-
... More
PIPE SCH 80, PE IBR,0.75",SMLS,ASTM A106 GR.B,ASME B36.10
318
-
-
... More
PIPE SCH 80, PE ,0.75",SMLS,API 5L GR.B,ASME B36.10
2046
-
-
... More
PIPE SCHXXS, BE IBR,1",SMLS,ASTM A335 GR.P22,ASME B36.10
186
-
-
... More
PIPE SCHXS, THD,1",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
90
-
-
... More
PIPE SCHXXS, BE IBR,11/2",SMLS,ASTM A335 GR.P22,ASME B36.10
24
-
-
... More
PIPE SCH 80, PE ,11/2",SMLS,API 5L GR.B,ASME B36.10
18
-
-
... More
PIPE SCH 40, BE,2",SMLS,API 5L GR.B,ASME B36.10
2980
-
-
... More
PIPE SCH10S,BE ,2",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
798
-
-
... More
PIPE SCH 40, BE IBR,2",SMLS,ASTM A106 GR.B,ASME B36.10
528
-
-
... More
PIPE SCHXS, THD,2",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
702
-
-
... More
PIPE SCH 40, BE,2",SMLS,API 5L GR.B,C&W,ASME B36.10
18
-
-
... More
PIPE SCH 40, BE,3",SMLS,API 5L GR.B,ASME B36.10
3906
-
-
... More
PIPE SCH10S,BE,3",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
672
-
-
... More
PIPE SCHSTD, THD,3",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
774
-
-
... More
PIPE SCH 40, BE,4",SMLS,API 5L GR.B,ASME B36.10
2214
-
-
... More
PIPE SCH STD, BE,4",SMLS,API 5L GR.B,ASME B36.10
24
-
-
... More
PIPE SCHSTD, THD,4",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
3048
-
-
... More
PIPE SCH10S,BE,4",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
264
-
-
... More
PIPE SCH 40, BE,6",SMLS,API 5L GR.B,ASME B36.10
870
-
-
... More
PIPE SCH STD, BE,6",SMLS,API 5L GR.B,ASME B36.10
2046
-
-
... More
PIPE SCHSTD, BE,6",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
918
-
-
... More
PIPE SCH 40, BE IBR,6",SMLS,ASTM A106 GR.B,ASME B36.10
504
-
-
... More
PIPE SCH40S,BE,6",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
510
-
-
... More
PIPE SCH 20,BE IBR,8",SMLS,ASTM A106 GR.B,ASME B36.10
324
-
-
... More
PIPE SCH120, BE IBR,8",SMLS,ASTM A106 GR.B,ASME B36.10
24
-
-
... More
PIPE SCH 20,BE ,8",ERW,API 5L GR.B,ASME B36.10
2274
-
-
... More
PIPE SCH 20,BE ,8",ERW,API 5L GR.B,C&W,ASME B36.10
48
-
-
... More
PIPE SCH10S,BE,8",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
1080
-
-
... More
PIPE SCH 20,BE IBR,10",SMLS,ASTM A106 GR.B,ASME B36.10
978
-
-
... More
PIPE SCH140,BE IBR,10",SMLS,ASTM A106 GR.B,ASME B36.10
654
-
-
... More
PIPE SCH 20,BE ,10",ERW,API 5L GR.B,ASME B36.10
4302
-
-
... More
PIPE SCH 20,BE ,10",ERW,API 5L GR.B,C&W,ASME B36.10
36
-
-
... More
PIPE SCH 20,BE,12",ERW,API 5L GR.B,ASME B36.10
1122
-
-
... More
PIPE SCH10S,BE,12",EFW,ASTM A358 TP316L CL.1,ASME B36.19
18
-
-
... More
PIPE 44.0 MM,BE IBR,12",SMLS,ASTM A335 GR.P22,ASME B36.10
24
-
-
... More
PIPE SCH 10,BE,14",ERW,API 5L GR.B,ASME B36.10
1128
-
-
... More
PIPE SCH 10,BE,14",ERW,API 5L GR.B,C&W,ASME B36.10
36
-
-
... More
PIPE SCH10S,BE,14",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
54
-
-
... More
PIPE SCH10S,BE,14",EFW,ASTM A358 TP316L CL.1,ASME B36.19
1194
-
-
... More
PIPE SCH 10,BE,16",LSAW,API 5L GR.B,C&W,ASME B36.10
24
-
-
... More
PIPE SCH STD,BE,16",LSAW,API 5L GR.B,ASME B36.10
1206
-
-
... More
PIPE SCH 10,BE,16",ERW,API 5L GR.B,ASME B36.10
30
-
-
... More
PIPE SCH10S,BE,16",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
252
-
-
... More
PIPE SCH 10,BE,18",LSAW,API 5L GR.B,C&W,ASME B36.10
192
-
-
... More
PIPE SCH 10,BE,18",ERW,API 5L GR.B,ASME B36.10
30
-
-
... More
PIPE SCH10S,BE,18",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19
756
-
-
... More
PIPE SCH 10,BE,20",LSAW,API 5L GR.B,C&W,ASME B36.10
24
-
-
... More
PIPE 68.00 MM, BE IBR,20",SMLS,ASTM A335 GR.P22,ASME B36.10
432
-
-
... More
PIPE SCHSTD, BE,20",LSAW,API 5L GR.B,ASME B36.10
18
-
-
... More
PIPE SCH XS,BE,20",SMLS,API 5L GR.B,ASME B36.10
306
-
-
... More
PIPE SCH 10,BE,20",ERW,API 5L GR.B,ASME B36.10
84
-
-
... More
PIPE SCH STD, BE,24",LSAW,API 5L GR.B,C&W,ASME B36.10
792
-
-
... More
PIPE 82.00 MM, BE IBR,24",SMLS,ASTM A335 GR.P22,ASME B36.10
282
-
-
... More
PIPE SCHSTD,BE,24",LSAW,API 5L GR.B,ASME B36.10
1146
-
-
... More
PIPE SCH 40,BE,24",SMLS,API 5L GR.B,ASME B36.10
18
-
-
... More
PIPE SCHSTD,BE,24",ERW,API 5L GR.B,ASME B36.10
30
-
-
... More
PIPE SCH STD,BE,28",EFW,ASTM A671 GR.CC60.CL32,ASME B36.10
30
-
-
... More
PIPE SCHSTD,BE,30",LSAW,API 5L GR.B,C&W,ASME B36.10
768
-
-
... More
PIPE SCHSTD,BE,30",ERW/SAW, API 5L GR.B,ASME B36.10
24
-
-
... More
PIPE SCH 10S,BE,32",EFW,STR.WELD,ASTM A312 TP304L,ASME B36.19
294
-
-
... More
PIPE SCH XS, BE,42",EFW,ASTM A671 GR.CC60.CL32,ASME B36.10
870
-
-
... More
PIPE SCH XS, BE,44",LSAW,API 5L GR.B,ASME B36.10
60
-
-
... More
PIPE SCH XS, BE,48",LSAW,API 5L GR.B,ASME B36.10
1044
-
-
... More
VALVE
-
-
-
... More
GATE VALVE
-
-
-
... More
GATE VALVE 800#,SOCW IBR,3/4",CS BODY ASTM A105,GAV201S
46
-
-
... More
GATE VALVE1500#,SOCW IBR,3/4",CS BODY ASTM A105,GAV204S
19
-
-
... More
GATE VALVE 800#,SOCW ,3/4",CS BODY ASTM A105,GAV201
190
-
-
... More
GATE VALVE 800#,THD,3/4",CS BODY ASTM A105,GAV207
17
-
-
... More
GATE VALVE 800#,SOCW ,3/4",SS BODY ASTM A182 GR F304,GAV501
37
-
-
... More
GATE VALVE 800#,SOCW ,3/4",LTCS BODY ASTM A350 GR LF2,GAV101
10
-
-
... More
GATE VALVE 2500#,BW IBR,3/4",CR-MO BODY ASTM A182 GR F22,GAV305S
20
-
-
... More
GATE VALVE 800#, SOCW,3/4",SS BODY AISI 316L,GAV401
12
-
-
... More
GATE VALVE 800#,SOCW IBR,1",CS BODY ASTM A105,GAV201S
29
-
-
... More
GATE VALVE1500#,SOCW IBR,1",CS BODY ASTM A105,GAV204S
19
-
-
... More
GATE VALVE 800#,THD,1",CS BODY ASTM A105,GAV207
3
-
-
... More
GATE VALVE 2500#,BW IBR,1",CR-MO BODY ASTM A182 GR F22,GAV305S
41
-
-
... More
GATE VALVE 2500#,BW IBR,11/2",CR-MO BODY ASTM A182 GR F22,GAV305S
41
-
-
... More
GATE VALVE 150#,FLG,2",CS BODY ASTM A216 GR WCB,GAV210
37
-
-
... More
GATE VALVE 150#,FLG,3",CS BODY ASTM A216 GR WCB,GAV210
2
-
-
... More
GATE VALVE 150#,FLG,4",CS BODY ASTM A216 GR WCB,GAV210
3
-
-
... More
BALL VALVE
-
-
-
... More
BALL VALVE (FLG),150#,2",CS BODY ASTM A216 GR WCB,BAV210
3
-
-
... More
BALL VALVE (FLG),150#,2",SS BODY ASTM A351 GR CF8M,BAV510
4
-
-
... More
BALL VALVE (FLG),150#,3",SS BODY ASTM A351 GR CF8M,BAV510
2
-
-
... More
BALL VALVE (FLG),150#,8",SS BODY ASTM A351 GR CF8M,BAV520
2
-
-
... More
BALL VALVE (FLG),150#,10",CS BODY ASTM A216 GR WCB,BAV210
2
-
-
... More
GLOBE VALVE
-
-
-
... More
GLOBE VALVE(800#),3/4",CS BODY ASTM A105,GLV201
202
-
-
... More
GLOBE VALVE(800#),3/4",CS BODY ASTM A105,GLV201S
38
-
-
... More
GLOBE VALVE(800#),3/4",SS BODY ASTM A182 GR F304,GLV501
41
-
-
... More
GLOBE VALVE(800#),3/4",LTCS BODY ASTM A350 GR LF2,GLV101
11
-
-
... More
GLOBE VALVE(1500#),3/4",CR-MO BODY ASTM A182 GR F22,GLV305S
20
-
-
... More
GLOBE VALVE(800#),3/4",SS BODY AISI 316L,GLV401
12
-
-
... More
FLANGES (150#)-SO-RF/THD-RF
-
-
-
... More
FLANGE (SO-RF 125 AARH), #150 IBR,3/4",CS ASTM A105,ASME B16.5
66
-
-
... More
FLANGE (THD-RF 125 AARH) ,#150,1",ASTM A105 HOT DIP GALV.,ASME B16.5
5
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,11/2",CS ASTM A105,ASME B16.5
2
-
-
... More
FLANGE (THD-RF 125 AARH) ,#150,2",ASTM A105 HOT DIP GALV.,ASME B16.5
55
-
-
... More
FLANGE (SO-RF 125 AARH), #150 ,2",CS ASTM A105,ASME B16.5
44
-
-
... More
FLANGE (SO-RF 125 AARH), #150 ,3",ASTM A105 HOT DIP GALV.,ASME B16.5
6
-
-
... More
FLANGE (THD-RF 125 AARH),#150,3",CS ASTM A105,ASME B16.5
12
-
-
... More
FLANGE (THD-RF 125 AARH),#150,4",ASTM A105 HOT DIP GALV.,ASME B16.5
9
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,4",CS ASTM A105,ASME B16.5
5
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,6",CS ASTM A105,ASME B16.5
3
-
-
... More
FLANGE (SO-RF 125 AARH), #150 IBR,6",CS ASTM A105,ASME B16.5
3
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,8",CS ASTM A105,ASME B16.5
8
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,10",CS ASTM A105,ASME B16.5
10
-
-
... More
FLANGE (SO-RF 125 AARH), #150 IBR,10",CS ASTM A105,ASME B16.5
2
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,12",CS ASTM A105,ASME B16.5
4
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,14",CS ASTM A105,ASME B16.5
5
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,16",CS ASTM A105,ASME B16.5
2
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,18",CS ASTM A105,ASME B16.5
1
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,20",CS ASTM A105,ASME B16.5
4
-
-
... More
FLANGE (SO-RF 125 AARH) ,#150,24",CS ASTM A105,ASME B16.5
2
-
-
... More
FLANGES (150#)-WNRF
-
-
-
... More
W.N.FLANGE(WN-RJ IBR),#1500,3/4",CS ASTM A105,ASME B16.5
35
-
-
... More
W.N.FLANGE(WN-RJ IBR),#2500,1",ASTM A182 F22,ASME B16.5
37
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,2",ASTM A182 F304,ASME B16.5
18
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,3",ASTM A182 F304,ASME B16.5
5
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,4",ASTM A182 F304,ASME B16.5
3
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#300,6",ASTM A182 F304,ASME B16.5
3
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,6",ASTM A105 HOT DIP GALV.,ASME B16.5
3
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,8",ASTM A182 F304,ASME B16.5
6
-
-
... More
W.N.FLANGE(WN-RJ IBR),#1500,10",CS ASTM A105,ASME B16.5
3
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,12",ASTM A182 F316L,ASME B16.5
2
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,16",ASTM A182 F304,ASME B16.5
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,18",ASTM A182 F304,ASME B16.5
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,28",ASTM A350 LF2 CL.1,ASME B16.47 SR.B
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,30",CS ASTM A105,ASME B16.47 SR.B
6
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,32",ASTM A182 F304L,ASME B16.47 SR.B
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,42",ASTM A350 LF2 CL.1,ASME B16.47 SR.B
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,44",CS ASTM A105,ASME B16.47 SR.B
1
-
-
... More
W.N.FLANGE(WN-RF 125 AARH),#150,48",CS ASTM A105,ASME B16.47 SR.B
1
-
-
... More
BLIND FLANGES
-
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,2",CS ASTM A105,ASME B16.5
4
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,3",ASTM A182 F304,ASME B16.5
2
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,3",ASTM A105 HOT DIP GALV.,ASME B16.5
4
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,4",ASTM A105 HOT DIP GALV.,ASME B16.5
5
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,6",ASTM A105 HOT DIP GALV.,ASME B16.5
2
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,8",CS ASTM A105,ASME B16.5
2
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,8",ASTM A182 F304,ASME B16.5
2
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,10",CS ASTM A105,ASME B16.5
2
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,24",CS ASTM A105,ASME B16.5
1
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,30",CS ASTM A105,ASME B16.47 SR.B
5
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,42",ASTM A350 LF2 CL.1,ASME B16.47 SR.B
1
-
-
... More
BLIND FLANGE (RF 125 AARH),150#,48",CS ASTM A105,ASME B16.47 SR.B
1
-
-
... More
GASKET(150#)
-
-
-
... More
GASKET (RJ OCT), 1500#,3/4",SOFT IRON,ASME B16.20
80
-
-
... More
GASKET (SPRL-WND RF), 150#,3/4",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
180
-
-
... More
GASKET (3.0 MM THK RF),150#,1",BUTYL RUBBER,ASME B16.21
12
-
-
... More
GASKET (RJ OCT), 2500#,1",ASTM A182 F5,ASME B16.20
85
-
-
... More
GASKET (SPRL-WND RF), 150#,11/2",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
3
-
-
... More
GASKET (3.0 MM THK RF),150#,2",BUTYL RUBBER,ASME B16.21
150
-
-
... More
GASKET (SPRL-WND RF), 150#,2",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
48
-
-
... More
GASKET (SPRL-WND RF), 150#,2",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
126
-
-
... More
GASKET (3.0 MM THK RF),150#,3",BUTYL RUBBER,ASME B16.21
15
-
-
... More
GASKET (SPRL-WND RF), 150#,3",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
12
-
-
... More
GASKET (SPRL-WND RF), 150#,3",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
33
-
-
... More
GASKET (3.0 MM THK RF),150#,4",BUTYL RUBBER,ASME B16.21
24
-
-
... More
GASKET (SPRL-WND RF), 150#,4",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
6
-
-
... More
GASKET (SPRL-WND RF), 150#,4",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
12
-
-
... More
GASKET (SPRL-WND RF), 300#,6",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
6
-
-
... More
GASKET (SPRL-WND RF), 150#,6",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
18
-
-
... More
GASKET (SPRL-WND RF), 150#,8",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
15
-
-
... More
GASKET (SPRL-WND RF), 150#,8",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
21
-
-
... More
GASKET (RJ OCT), 1500#,10",SOFT IRON,ASME B16.20
5
-
-
... More
GASKET (SPRL-WND RF), 150#,10",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
30
-
-
... More
GASKET (SPRL-WND RF), 150#,12",TP316L SS WDG;GPH FLR;TP316L SS INR RNG/ OTR RNG,ASME B16.20
3
-
-
... More
GASKET (SPRL-WND RF), 150#,12",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
9
-
-
... More
GASKET (SPRL-WND RF), 150#,14",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
9
-
-
... More
GASKET (SPRL-WND RF), 150#,16",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
3
-
-
... More
GASKET (SPRL-WND RF), 150#,16",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
6
-
-
... More
GASKET (SPRL-WND RF), 150#,18",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20
3
-
-
... More
GASKET (SPRL-WND RF), 150#,18",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
3
-
-
... More
GASKET (SPRL-WND RF), 150#,24",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
6
-
-
... More
GASKET (SPRL-WND RF), 150#,30",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20
18
-
-
... More
GASKET (SPRL-WND RF), 150#,32",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20/B16.47 SR.B
3
-
-
... More
GASKET (SPRL-WND RF), 150#,44",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20/B16.47 SR.B
3
-
-
... More
GASKET (SPRL-WND RF), 150#,48",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20/B16.47 SR.B
3
-
-
... More
STUD & 2NUTS
-
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,85
90
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,95
45
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,110
56
-
-
... More
STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,120
17
-
-
... More
STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,140
22
-
-
... More
STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,150
22
-
-
... More
STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,255
39
-
-
... More
STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B16/ASTM A194 GR.7,145
190
-
-
... More
STUD & 2NUTS HVY HEX,11/4,ASTM A320 GR.L7/ASTM A194 GR.7,220
39
-
-
... More
STUD & 2NUTS HVY HEX,11/2,ASTM A320 GR.L7/ASTM A194 GR.7,285
50
-
-
... More
STUD & 2NUTS HVY HEX,1/2,ASTM A193 GR.B7/ASTM A194 GR.2H,65
336
-
-
... More
STUD & 2NUTS HVY HEX,1/2,ASTM A193 GR.B7/ASTM A194 GR.2H,75
8
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B7/ASTM A194 GR.2H,85
235
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B7/ASTM A194 GR.2H,95
106
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,100
45
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,110
78
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,115
179
-
-
... More
STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B7/ASTM A194 GR.2H,120
218
-
-
... More
STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B7/ASTM A194 GR.2H,135
50
-
-
... More
STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B7/ASTM A194 GR.2H,140
45
-
-
... More
STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B7/ASTM A194 GR.2H,150
22
-
-
... More
STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B7/ASTM A194 GR.2H,160
112
-
-
... More
STUD & 2NUTS HVY HEX,11/4,ASTM A193 GR.B7/ASTM A194 GR.2H,180
56
-
-
... More
STUD & 2NUTS HVY HEX,11/4,ASTM A193 GR.B7/ASTM A194 GR.2H,230
235
-
-
... More
STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B7/ASTM A194 GR.2H,300
56
-
-
... More
STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B7/ASTM A194 GR.2H,310
62
-
-
... More
STUD & 2NUTS HVY HEX,17/8,ASTM A193 GR.B7/ASTM A194 GR.2H,350
34
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B8T CL.2/ASTM A194 GR.8TA,125
34
-
-
... More
STUD & 2NUTS HVY HEX,1/2,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,70
22
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,85
280
-
-
... More
STUD & 2NUTS HVY HEX,5/8,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,95
118
-
-
... More
STUD & 2NUTS HVY HEX,3/4,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,100
22
-
-
... More
ELBOW(1.5D)
-
-
-
... More
ELBOW 90 DEG (3000#),SOCW,1/2",CS ASTM A105,ASME B16.11
327
-
-
... More
ELBOW 90 DEG (3000#),SOCW,3/4",CS ASTM A105,ASME B16.11
327
-
-
... More
ELBOW 90 DEG (3000#),SOCW, IBR,3/4",CS ASTM A105,ASME B16.11
198
-
-
... More
ELBOW 90 DEG (6000#),SOCW,IBR,3/4",CS ASTM A105,ASME B16.11
106
-
-
... More
ELBOW 90(BW IBR),1",ASTM A182 F22,ASME B16.9
112
-
-
... More
ELBOW 90 DEG (3000#),THD,1",ASTM A105 HOT DIP GALV.,ASME B16.11
12
-
-
... More
ELBOW 90 DEG (SCH 40),BW,2",ASTM A234 WPB-SMLS,ASME B16.9
216
-
-
... More
ELBOW 90 DEG (SCH 40),BW IBR,2",ASTM A234 WPB-SMLS,ASME B16.9
90
-
-
... More
ELBOW 90 DEG (3000#),THD,2",ASTM A105 HOT DIP GALV.,ASME B16.11
30
-
-
... More
ELBOW 90 DEG (SCH 10S),BW,2",ASTM A403 WP304-WLDD,ASME B16.9
55
-
-
... More
ELBOW 90 DEG (SCH 40),BW ,3",ASTM A234 WPB-SMLS,ASME B16.9
90
-
-
... More
ELBOW 90 DEG (3000#),THD,3",ASTM A105 HOT DIP GALV.,ASME B16.11
6
-
-
... More
ELBOW 90 DEG (SCH 10S),BW,3",ASTM A403 WP304-WLDD,ASME B16.9
33
-
-
... More
ELBOW 90 DEG (SCH 40),BW ,4",ASTM A234 WPB-SMLS,ASME B16.9
62
-
-
... More
ELBOW 90 DEG (3000#),THD,4",ASTM A105 HOT DIP GALV.,ASME B16.11
22
-
-
... More
ELBOW 90 DEG (SCH 10S),BW,4",ASTM A403 WP304-WLDD,ASME B16.9
6
-
-
... More
ELBOW 90 DEG (SCH STD),BW,6",ASTM A234 WPB-SMLS,ASME B16.9
83
-
-
... More
ELBOW 90 DEG (SCH 40),BW ,6",ASTM A234 WPB-SMLS,ASME B16.9
22
-
-
... More
ELBOW 90 DEG (SCH 40),BW IBR,6",ASTM A234 WPB-SMLS,ASME B16.9
10
-
-
... More
ELBOW 90 DEG (SCH STD),BW,6",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9
29
-
-
... More
ELBOW 90 DEG (SCH 40S),BW,6",ASTM A403 WP304-WLDD,ASME B16.9
10
-
-
... More
ELBOW 90 DEG (SCH 20),BW IBR,8",ASTM A234 WPB-SMLS,ASME B16.9
24
-
-
... More
ELBOW 90 DEG (SCH 20),BW ,8",ASTM A234 WPB-WLDD,ASME B16.9
68
-
-
... More
ELBOW 90 DEG (SCH 10S),BW ,8",ASTM A403 WP304-WLDD,ASME B16.9
28
-
-
... More
ELBOW 90 DEG (SCH 20),BW IBR,10",ASTM A234 WPB-SMLS,ASME B16.9
116
-
-
... More
ELBOW 90 DEG (SCH 140),BW IBR,10",ASTM A234 WPB-SMLS,ASME B16.9
99
-
-
... More
ELBOW 90 DEG (SCH 20),BW ,10",ASTM A234 WPB-WLDD,ASME B16.9
83
-
-
... More
ELBOW 90 DEG (SCH 20),BW,10",ASTM A234 WPB-WLDD,PDIL-PDS-600
26
-
-
... More
ELBOW 90 DEG (SCH 20),BW,12",ASTM A234 WPB-WLDD,ASME B16.9
32
-
-
... More
ELBOW 90 DEG (SCH 10 S),BW,14",ASTM A403 WP316L-WLDD,ASME B16.9
42
-
-
... More
ELBOW 90 DEG (SCH 10),BW,14",ASTM A234 WPB-WLDD,ASME B16.9
34
-
-
... More
ELBOW 90 DEG (SCH 10 S),BW,14",ASTM A403 WP304-WLDD,ASME B16.9
4
-
-
... More
ELBOW 90 DEG (SCH 10),BW,16",ASTM A234 WPB-WLDD,ASME B16.9
3
-
-
... More
ELBOW 90 DEG (SCH STD),BW,16",ASTM A234 WPB-WLDD,ASME B16.9
42
-
-
... More
ELBOW 90 DEG (SCH 10S),BW,16",ASTM A403 WP304-WLDD,ASME B16.9
7
-
-
... More
ELBOW 90 DEG (SCH 10),BW,18",ASTM A234 WPB-WLDD,ASME B16.9
4
-
-
... More
ELBOW 90 DEG (SCH 10 S),BW,18",ASTM A403 WP304-WLDD,ASME B16.9
17
-
-
... More
ELBOW 90 DEG (SCH XS),BW ,20",ASTM A234 WPB-SMLS,ASME B16.9
17
-
-
... More
ELBOW 90 DEG (68.0MM),BW IBR,20",ASTM A234 WP22,ASME B16.9
44
-
-
... More
ELBOW 90 DEG (SCH 10),BW,20",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
ELBOW 90 DEG (82.0MM),BW IBR,24",ASTM A234 WP22,ASME B16.9
35
-
-
... More
ELBOW 90 DEG (SCH STD),BW,24",ASTM A234 WPB-WLDD,ASME B16.9
51
-
-
... More
ELBOW 90 DEG (SCH STD),BW,28",ASTM A420 WPL6-WLDD,ASME B16.9
3
-
-
... More
ELBOW 90 DEG (SCH STD),BW,30",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
ELBOW 90 DEG (SCH 10),BW,32",ASTM A403 WP304L-WLDD,ASME B16.9
12
-
-
... More
ELBOW 90 DEG (SCH XS),BW ,42",ASTM A420 WPL6-WLDD,ASME B16.9
30
-
-
... More
ELBOW 90 DEG (SCH XS),BW ,44",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
ELBOW 90 DEG (SCH XS),BW ,48",ASTM A234 WPB-WLDD,ASME B16.9
40
-
-
... More
ELBOW 45 DEG(BW)
-
-
-
... More
ELBOW 45 DEG (SCHSTD),BW,6",ASTM A234 WPB-SMLS,ASME B16.9
9
-
-
... More
ELBOW 45 DEG(SCH20),BW IBR,8",ASTM A234 WPB-SMLS,ASME B16.9
3
-
-
... More
ELBOW 45 DEG(SCH20),BW,42",ASTM A403 WP316L-WLDD,ASME B16.9
7
-
-
... More
ELBOW 45 DEG(SCH20),BW,10",ASTM A234 WPB-WLDD,ASME B16.9
5
-
-
... More
ELBOW 45 DEG(SCH20),BW,12",ASTM A234 WPB-WLDD,ASME B16.9
4
-
-
... More
ELBOW 45 DEG(SCH10S),BW,14",ASTM A403 WP316L-WLDD,ASME B16.9
5
-
-
... More
ELBOW 45 DEG(SCH10),BW,14",ASTM A234 WPB-WLDD,ASME B16.9
4
-
-
... More
ELBOW 45 DEG(SCH10),BW,16",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
ELBOW 45 DEG(SCH STD),BW,16",ASTM A234 WPB-WLDD,ASME B16.9
4
-
-
... More
ELBOW 45 DEG(SCH 10),BW,18",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
ELBOW 45 DEG(SCH 10S),BW,18",ASTM A403 WP304-WLDD,ASME B16.9
1
-
-
... More
ELBOW 45 DEG(68.0MM),BW IBR,20",ASTM A234 WP22,ASME B16.9
13
-
-
... More
ELBOW 45 DEG(SCH 10),BW,20",ASTM A234 WPB-WLDD,ASME B16.9
9
-
-
... More
ELBOW 45 DEG(82.0MM),BW IBR,24",ASTM A234 WP22,ASME B16.9
15
-
-
... More
ELBOW 45 DEG(SCH STD),BW,24",ASTM A234 WPB-WLDD,ASME B16.9
8
-
-
... More
ELBOW 45 DEG(SCH STD),BW,30",ASTM A234 WPB-WLDD,ASME B16.9
6
-
-
... More
ELBOW 45 DEG(SCH10S),BW,32",ASTM A403 WP304L-WLDD,ASME B16.9
2
-
-
... More
ELBOW 45 DEG(SCH XS),BW,42",ASTM A420 WPL6-WLDD,ASME B16.9
3
-
-
... More
ELBOW 45 DEG(SCH XS),BW,48",ASTM A234 WPB-WLDD,ASME B16.9
4
-
-
... More
SOCKOLET(SOCW)
-
-
-
... More
SOCKOLET,SOCW,3000#,2"X3/4",CS ASTM A105,MSS SP 97
57
-
-
... More
SOCKOLET,SOCW,3000#,2"X3/4",CS ASTM A105,MSS SP 97
12
-
-
... More
SOCKOLET,SOCW, IBR,3000#,2"X3/4",ASTM A182 F304,MSS SP 97
26
-
-
... More
SOCKOLET,SOCW,3000#,3"X3/4",CS ASTM A105,MSS SP 97
53
-
-
... More
SOCKOLET,SOCW,3000#,3"X3/4",ASTM A182 F304,MSS SP 97
9
-
-
... More
SOCKOLET,SOCW,3000#,4"X3/4",CS ASTM A105,MSS SP 97
23
-
-
... More
SOCKOLET,SOCW,3000#,4"X3/4",ASTM A182 F304,MSS SP 97
5
-
-
... More
SOCKOLET,SOCW,3000#,6"X3/4",CS ASTM A105,MSS SP 97
47
-
-
... More
SOCKOLET,SOCW, IBR,3000#,6"X3/4",CS ASTM A105,MSS SP 97
6
-
-
... More
SOCKOLET,SOCW,3000#,6"X3/4",ASTM A182 F304,MSS SP 97
6
-
-
... More
SOCKOLET,SOCW,3000#,8"X3/4",CS ASTM A105,MSS SP 97
22
-
-
... More
SOCKOLET,SOCW,3000#,IBR,8"X3/4",CS ASTM A105,MSS SP 97
31
-
-
... More
SOCKOLET,SOCW,6000#,IBR,8"X3/4",CS ASTM A105,MSS SP 97
18
-
-
... More
SOCKOLET,SOCW,3000#,8"X3/4",ASTM A182 F304,MSS SP 97
7
-
-
... More
SOCKOLET,SOCW,3000#,10"X3/4",CS ASTM A105,MSS SP 97
45
-
-
... More
SOCKOLET,SOCW,3000#,IBR,10"X3/4",CS ASTM A105,MSS SP 97
22
-
-
... More
SOCKOLET,SOCW,6000#,IBR,10"X3/4",CS ASTM A105,MSS SP 97
18
-
-
... More
SOCKOLET,SOCW,3000#,12"X3/4",CS ASTM A105,MSS SP 97
25
-
-
... More
SOCKOLET,SOCW,3000#,14"X3/4",CS ASTM A105,MSS SP 97
17
-
-
... More
SOCKOLET,SOCW,3000#,14"X3/4",ASTM A182 F304,MSS SP 97
3
-
-
... More
SOCKOLET,SOCW,3000#,14"X3/4",ASTM A182 F316L,MSS SP 97
22
-
-
... More
SOCKOLET,SOCW,3000#,16"X3/4",CS ASTM A105,MSS SP 97
22
-
-
... More
SOCKOLET,SOCW,3000#,16"X3/4",ASTM A182 F304,MSS SP 97
4
-
-
... More
SOCKOLET,SOCW,3000#,18"X3/4",ASTM A182 F304,MSS SP 97
8
-
-
... More
SOCKOLET,SOCW,3000#,20"X3/4",CS ASTM A105,MSS SP 97
8
-
-
... More
SOCKOLET,SOCW,3000#,24"X3/4",CS ASTM A105,MSS SP 97
22
-
-
... More
SOCKOLET,SOCW,3000#,32"X3/4",ASTM A350 LF2 CL.1,MSS SP 97
16
-
-
... More
SOCKOLET,SOCW,3000#,42"X3/4",ASTM A182 F304L,MSS SP 97
6
-
-
... More
SOCKOLET,SOCW,3000#,44"X3/4",CS ASTM A105,MSS SP 97
1
-
-
... More
SOCKOLET,SOCW,3000#,48"X3/4",CS ASTM A105,MSS SP 97
22
-
-
... More
WELDOLET
-
-
-
... More
WELDOLET(BW),6"X2",ASTM A105 HOT DIP GALV.,MSS SP 97
5
-
-
... More
WELDOLET(BW),8"X3",CS ASTM A105,MSS SP 97
3
-
-
... More
WELDOLET(BW),8"X2",CS ASTM A105,MSS SP 97
6
-
-
... More
WELDOLET(BW, IBR),8"X2",CS ASTM A105,MSS SP 97
8
-
-
... More
WELDOLET(BW),10"X4",CS ASTM A105,MSS SP 97
2
-
-
... More
WELDOLET(BW),10"X3",CS ASTM A105,MSS SP 97
2
-
-
... More
WELDOLET(BW, IBR),10"X3",CS ASTM A105,MSS SP 97
2
-
-
... More
WELDOLET(BW),10"X2",CS ASTM A105,MSS SP 97
7
-
-
... More
WELDOLET(BW, IBR),10"X2",CS ASTM A105,MSS SP 97
17
-
-
... More
WELDOLET(BW, IBR),12"X1",ASTM A182 F22,MSS SP 97
19
-
-
... More
WELDOLET(BW, IBR),20"X12",ASTM A182 F22,MSS SP 97
10
-
-
... More
WELDOLET(BW, IBR),20"X3/4",ASTM A182 F22,MSS SP 97
9
-
-
... More
WELDOLET(BW),24"X6",CS ASTM A105,MSS SP 97
1
-
-
... More
WELDOLET(BW),24"X2",CS ASTM A105,MSS SP 97
1
-
-
... More
WELDOLET(BW, IBR),24"X12",ASTM A182 F22,MSS SP 97
18
-
-
... More
WELDOLET(BW, IBR),24"X3/4",ASTM A182 F22,MSS SP 97
9
-
-
... More
WELDOLET(BW),28"X3",ASTM A350 LF2 CL.1,MSS SP 97
1
-
-
... More
THREDOLET
-
-
-
... More
THREDOLET,3000#, THD,6"X3/4",ASTM A105 HOT DIP GALV.,MSS SP 97
13
-
-
... More
TEE
-
-
-
... More
TEE(THD),1"X1",ASTM A105 HOT DIP GALV.,ASME B16.11
3
-
-
... More
TEE(THD),2"X2",ASTM A234 WPB-SMLS,ASME B16.11
14
-
-
... More
TEE(THD),2"X2",ASTM A105 HOT DIP GALV.,ASME B16.11
2
-
-
... More
TEE(THD),2"X1",ASTM A105 HOT DIP GALV.,ASME B16.11
28
-
-
... More
TEE(THD),3"X3",ASTM A105 HOT DIP GALV.,ASME B16.11
2
-
-
... More
TEE(THD),3"X2",ASTM A105 HOT DIP GALV.,ASME B16.11
4
-
-
... More
TEE(THD),3"X1",ASTM A105 HOT DIP GALV.,ASME B16.11
3
-
-
... More
TEE(THD),3"X2",ASTM A403 WP304-WLDD,ASME B16.9
4
-
-
... More
TEE(BW),4"X4",ASTM A234 WPB-SMLS,ASME B16.9
3
-
-
... More
TEE(THD),4"X4",ASTM A105 HOT DIP GALV.,ASME B16.11
4
-
-
... More
TEE(BW),4"X2",ASTM A234 WPB-SMLS,ASME B16.9
4
-
-
... More
TEE(THD),4"X3",ASTM A105 HOT DIP GALV.,ASME B16.11
2
-
-
... More
TEE(THD),4"X2",ASTM A105 HOT DIP GALV.,ASME B16.11
19
-
-
... More
TEE(THD),4"X3/4",ASTM A105 HOT DIP GALV.,ASME B16.11
3
-
-
... More
TEE(BW),4"X2",ASTM A403 WP304-WLDD,ASME B16.9
2
-
-
... More
TEE(BW),6"X6",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9
2
-
-
... More
TEE(BW),6"X4",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9
9
-
-
... More
TEE(BW),6"X3",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9
2
-
-
... More
TEE(BW),IBR,8"X8",ASTM A234 WPB-SMLS,ASME B16.9
5
-
-
... More
TEE(BW),8"X8",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
TEE(BW),8"X8",ASTM A403 WP304-WLDD,ASME B16.9
3
-
-
... More
TEE(BW),8"X4",ASTM A403 WP304-WLDD,ASME B16.9
3
-
-
... More
TEE(BW),10"X10",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
TEE(BW),IBR,10"X8",ASTM A234 WPB-SMLS,ASME B16.9
22
-
-
... More
TEE(BW),IBR,10"X8",ASTM A234 WPB-SMLS,ASME B16.9
18
-
-
... More
TEE(BW),10"X8",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
TEE(BW),18"X14",ASTM A403 WP304-WLDD,ASME B16.9
1
-
-
... More
TEE(BW),24"X24",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
TEE(BW, IBR),24"X20",ASTM A234 WP22,ASME B16.9
1
-
-
... More
TEE(BW),30"X30",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
REDUCER
-
-
-
... More
REDUCER ECC.,2"x11/2",ASTM A234 WPB-SMLS,ASME B16.9
2
-
-
... More
REDUCER ECC.,3"X2",ASTM A234 WPB-SMLS,ASME B16.9
2
-
-
... More
REDUCER ECC.,4"X3",ASTM A234 WPB-SMLS,ASME B16.9
3
-
-
... More
REDUCER ECC.,4"X2",ASTM A234 WPB-SMLS,ASME B16.9
3
-
-
... More
REDUCER ECC.,4"X3",ASTM A105 HOT DIP GALV.,ASME B16.11
2
-
-
... More
REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,ASME B16.9
3
-
-
... More
REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,ASME B16.9
2
-
-
... More
REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9
2
-
-
... More
REDUCER ECC.,8"X6",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
REDUCER ECC.,8"X4",ASTM A403 WP304-WLDD,ASME B16.9
2
-
-
... More
REDUCER ECC.,10"x8",ASTM A234 WPB-SMLS,ASME B16.9
2
-
-
... More
REDUCER ECC.,10"X3",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
REDUCER ECC.,12"x10",ASTM A234 WPB-WLDD,ASME B16.9
2
-
-
... More
REDUCER ECC.,14"X12",ASTM A403 WP316L-WLDD,ASME B16.9
2
-
-
... More
REDUCER ECC.,16"X14",ASTM A403 WP304-WLDD,ASME B16.9
1
-
-
... More
REDUCER ECC.,18"X16",ASTM A403 WP304-WLDD,ASME B16.9
1
-
-
... More
REDUCER ECC.,24"X20",ASTM A234 WPB-SMLS,ASME B16.9
1
-
-
... More
REDUCER ECC.,24"X20",ASTM A234 WP22,ASME B16.9
1
-
-
... More
REDUCER ECC.,24"X20",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
REDUCER ECC.,24"X18",ASTM A234 WPB-WLDD,ASME B16.9
1
-
-
... More
CAP
-
-
-
... More
CAP,3/4,CS ASTM A105,ASME B16.11
363
-
-
... More
CAP,3/4,CS ASTM A105,ASME B16.11
44
-
-
... More
CAP,3/4,CS ASTM A105,ASME B16.11
18
-
-
... More
CAP,1,CS ASTM A105,ASME B16.11
26
-
-
... More
CAP,1,CS ASTM A105,ASME B16.11
18
-
-
... More
CAP,3/4,ASTM A182 F22,ASME B16.9
19
-
-
... More
CAP,11/2,ASTM A182 F22,ASME B16.9
19
-
-
... More
CAP,3/4,ASTM A182 F304,ASME B16.11
66
-
-
... More
CAP,3/4,ASTM A350 LF2 CL.1,ASME B16.11
19
-
-
... More
CAP,2,ASTM A234 WPB-SMLS,ASME B16.9
7
-
-
... More
CAP,8,ASTM A234 WPB-SMLS,ASME B16.9
26
-
-
... More
CAP,8,ASTM A234 WPB-SMLS,ASME B16.9
18
-
-
... More
CAP,3/4,ASTM A182 F304L,ASME B16.11
7
-
-
... More
CAP,3/4,ASTM A182 F316L,ASME B16.11
22
-
-
... More
CAP,12,ASTM A234 WP22,ASME B16.9
19
-
-
... More
CAP,3/4,ASTM A105 HOT DIP GALV.,ASME B16.11
15
-
-
... More
CAP,1,ASTM A105 HOT DIP GALV.,ASME B16.11
3
-
-
... More
CAP,2,ASTM A105 HOT DIP GALV.,ASME B16.11
28
-
-
... More
CAP,3,ASTM A105 HOT DIP GALV.,ASME B16.11
2
-
-
... More
CAP,4,ASTM A105 HOT DIP GALV.,ASME B16.11
3
-
-
... More
COUPLING
-
-
-
... More
COUPLING,1/2,CS ASTM A105,ASME B16.11
400
-
-
... More
COUPLING,3/4,CS ASTM A105,ASME B16.11
400
-
-
... More
COUPLING,3/4,CS ASTM A105,ASME B16.11
60
-
-
... More
COUPLING,3/4,CS ASTM A105,ASME B16.11
33
-
-
... More
COUPLING,11/2,CS ASTM A105,ASME B16.11
5
-
-
... More
COUPLING,1,ASTM A105 HOT DIP GALV.,ASME B16.11
17
-
-
... More
COUPLING,2,ASTM A105 HOT DIP GALV.,ASME B16.11
123
-
-
... More
COUPLING,3,ASTM A105 HOT DIP GALV.,ASME B16.11
136
-
-
... More
COUPLING,4,ASTM A105 HOT DIP GALV.,ASME B16.11
550
-
-
... More
HALF COUPLING
-
-
-
... More
HALF COUPLING,3/4,CS ASTM A105,ASME B16.11
7
-
-
... More
HALF COUPLING,1,CS ASTM A105,ASME B16.11
26
-
-
... More
HALF COUPLING,1,CS ASTM A105,ASME B16.11
18
-
-
... More
NIPPLE
-
-
-
... More
NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10
66
-
-
... More
NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10
66
-
-
... More
NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10
18
-
-
... More
NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10
5
-
-
... More
NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10
5
-
-
... More
NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10
18
-
-
... More
NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10
18
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP304L,ASME B36.19
7
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP304L,ASME B36.19
7
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP316L,ASME B36.19
22
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP316L,ASME B36.19
22
-
-
... More
NIPPLE,3/4,SMLS,API 5L GR.B,ASME B36.10
360
-
-
... More
NIPPLE,3/4,SMLS,API 5L GR.B,ASME B36.10
363
-
-
... More
NIPPLE,3/4,SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10
31
-
-
... More
NIPPLE,3/4,SMLS,ASTM A333 GR.6,ASME B36.10
19
-
-
... More
NIPPLE,3/4,SMLS,ASTM A333 GR.6,ASME B36.10
19
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP304,ASME B36.19
65
-
-
... More
NIPPLE,3/4,SMLS,ASTM A312 TP304,ASME B36.19
66
-
-
... More
SUPPLY OF PIPING ITEMES ON THE BASIS OF WEIGHT BASIS: This SOR item is applicable only when the extra supply items comes with diffrent sizes, which are not included in SOR item "SUPPLY OF PIPING ITEMS" & applicable only after approval of Client/PMC.
-
-
-
... More
PIPING ≤ 2" SIZE
-
-
-
... More
Carbon Steel (Non-IBR)
1
-
-
... More
Carbon Steel (IBR)
1
-
-
... More
Alloy Steel (IBR)
1
-
-
... More
Stainless Steel
1
-
-
... More
PIPING 2" SIZE
-
-
-
... More
Carbon Steel(Non-IBR)
1
-
-
... More
Carbon Steel (IBR)
1
-
-
... More
Alloy Steel (IBR)
1
-
-
... More
Stainless Steel
1
-
-
... More
Note: This item is applicable for the material & sizes, which are not covered under SOR item "SUPPLY OF PIPING ITEMS" & also applicable for future new upcomming sizes(Extra Items) & applicable only after approval of Client/PMC.
-
-
-
... More
FABRICATION & ERECTION OF PIPING (AG & UG):
-
-
-
... More
FABRICATION & ERECTION OF PIPING(AG):
-
-
-
... More
Loading/unloading & Transportation of all piping items at work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending,providing all branch connections, preheating wherever required, welding, threading, and erection/ laying of pipes of all types and thickness over sleepers, overhead on racks and at all elevations, connecting with equipment nozzles, strainers, steam traps, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, springs, sample coolers etc. and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings, like elbows, reducers, tees,vents, drains (but excluding reinforcing pads),SW valves upto 1.5 Inch NB, Steam Supply/ Condensate Recovery stations(Cast/Fabricated), Supply & welding of Strip to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic,vacuum, and any other type of testing as specified draining, drying by compressed air, flushing and blowing, seal/leak testing and making ready for commissioning as per drawings,performing Positive Material Identification (PMI) using alloy analysers (if required), completing all such works in all respects (including preparation of isometrics as mentioned in the Scope of Work for the job) as per the specifications, drawings and instructions of Engineer-in-Charge.PMI shall be performed by third party as defined in PMI spec. Rates for tubing (if any) shall include rates for valves, fittings, all in line instruments and testing etc. Carbon steel piping includes LTCS piping also. Welding shall include all the examination and testing required such as but not limited to radiography, ultrasonic, magnaflux /dye check etc and pre and post heat treatment wherever required.Unit rates shall include the cost of supervision, labour, overheads/profits, consumables, and other associated arrangements required to execute all the related activities. The quoted rates shall include seal welding of thermocouples, Orifice flange plug, nipple, and hydro testing drain and vents caps.The cost towards radiography only shall be paid separately as per SOR item "RADIOGRAPHY"
-
-
-
... More
PIPE: CARBON STEEL PIPING (NON IBR); THK. = 10MM
-
-
-
... More
FABRICATION (BUTT WELD/THD)
-
-
-
... More
UTPO 1.5 INCH
2210
-
-
... More
NB 2 INCH - 6 INCH
16520
-
-
... More
NB 8 INCH - 14 INCH
21500
-
-
... More
NB 16 INCH - 24 INCH
15200
-
-
... More
NB 28 INCH - 36 INCH
2200
-
-
... More
PIPE: CARBON STEEL PIPING (NON IBR); THK. 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB 16 INCH - 24 INCH
1510
-
-
... More
NB 42 INCH - 48INCH
13432
-
-
... More
PIPE: CARBON STEEL PIPING (IBR); THK. = 10MM
-
-
-
... More
FABRICATION (BUTT WELD/THD)
-
-
-
... More
UTPO 1.5 INCH
1020
-
-
... More
NB 2 INCH - 6 INCH
1295
-
-
... More
NB 8 INCH - 14 INCH
6550
-
-
... More
PIPE: CARBON STEEL PIPING ( IBR); THK. 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB 8 INCH - 14 INCH
3300
-
-
... More
PIPE: LT STEEL PIPING ( IBR/NON IBR); THK. 10MM
-
-
-
... More
FABRICATION (BUTT WELD/THD)
-
-
-
... More
UTPO 1.5 INCH
44
-
-
... More
NB 28 INCH - 36 INCH
328
-
-
... More
NB 42 INCH - 48 INCH
8963
-
-
... More
PIPE: ALLOY STEEL PIPING (IBR); THK.= 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB UTPO 1.5 INCH
490
-
-
... More
PIPE: ALLOY STEEL PIPING (IBR); THK. 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB UTPO 1.5 INCH
150
-
-
... More
NB 8 INCH - 14 INCH
273
-
-
... More
NB 16 INCH - 24 INCH
8500
-
-
... More
PIPE: STAINLESS STEEL PIPING ; THK. = 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB UTPO 1.5 INCH
220
-
-
... More
NB 2 INCH - 6 INCH
2070
-
-
... More
NB 8 INCH - 14 INCH
6475
-
-
... More
NB 16 INCH - 24 INCH
3925
-
-
... More
NB 28 INCH - 36 INCH
2550
-
-
... More
FABRICATION (FILLET WELD)
-
-
-
... More
NB UPTO 1.5 INCH
10
-
-
... More
ERECTION OF PIPING:
-
-
-
... More
CARBON STEEL PIPING (NON IBR); THK. = 10MM
-
-
-
... More
UTPO 1.5 INCH
2750
-
-
... More
NB 2 INCH - 6 INCH
67000
-
-
... More
NB 8 INCH - 14 INCH
98716
-
-
... More
NB 16 INCH - 24 INCH
70000
-
-
... More
NB 28 INCH - 36 INCH
22000
-
-
... More
CARBON STEEL PIPING (NON IBR); THK. 10MM
-
-
-
... More
NB 16 INCH - 24 INCH
7000
-
-
... More
NB 42 INCH - 48INCH
52200
-
-
... More
CARBON STEEL PIPING ( IBR); THK.=10MM
-
-
-
... More
UTPO 1.5 INCH
370
-
-
... More
NB 2 INCH - 6 INCH
4100
-
-
... More
NB 8 INCH - 14 INCH
13600
-
-
... More
CARBON STEEL PIPING (IBR); THK. 10MM
-
-
-
... More
NB 8 INCH - 14 INCH
6100
-
-
... More
PIPE: LT STEEL PIPING ( IBR/NON IBR); THK. 10MM
-
-
-
... More
UTPO 1.5 INCH
20
-
-
... More
NB 28 INCH - 36 INCH
500
-
-
... More
NB 42 INCH - 48 INCH
36500
-
-
... More
PIPE: ALLOY STEEL PIPING (IBR); THK.= 10MM
-
-
-
... More
NB UTPO 1.5 INCH
220
-
-
... More
PIPE: ALLOY STEEL PIPING (IBR); THK. 10MM
-
-
-
... More
NB 8 INCH - 14 INCH
130
-
-
... More
NB 16 INCH - 24 INCH
15500
-
-
... More
PIPE: STAINLESS STEEL PIPING ; THK. = 10MM
-
-
-
... More
NB UTPO 1.5 INCH
10
-
-
... More
NB 2 INCH - 6 INCH
7700
-
-
... More
NB 8 INCH - 14 INCH
26290
-
-
... More
NB 16 INCH - 24 INCH
17500
-
-
... More
NB 28 INCH - 36 INCH
9410
-
-
... More
UNDER GROUND (U-G) PIPING WORKS:
-
-
-
... More
EARTHWORK
-
-
-
... More
Excavation of trenches for pipelines in all kinds of soil including soft and hard rock mixed in nature both dry and wet conditions including dressing of sides and bottom getting out excavated material in the approved dump yard in all leads of 100 meter including spreding and leveling as per instruction of owner/Consultant.
1500
-
-
... More
Same as above but lift from 1.5 Mtr.to 3.0 Mtr.
1200
-
-
... More
Providing and filling with fine river sand in trenches a layer of 150 mm from BOP(Bottom of pipe) and 200 mm top of pipes(In case of pipe size24" NB) and for pipe24" filling of sand in trenches shall be 150mm from BOP and 100 mm from top of pipe including watering, ramming, consolidating and complete dressing.
700
-
-
... More
Filling with available earth excavated without stones & unwanted materials in the treanches in layer other than Sr. No. III. In depth consolidation each deposited layer by ramming and watering all complete.
900
-
-
... More
Removal or excess excavated materials after back filling of trenchesfrom site of work to other area in factory premises, as directed by ownerand spreading and leveling the same.
800
-
-
... More
Cutting and disposal of RCC, PCC and paved surface at all level other than I & II
500
-
-
... More
FABRICATION & ERECTION OF UNDER GROUND (U-G) PIPING
-
-
-
... More
PIPE: CARBON STEEL PIPING (IBR/NON IBR); THK. = 10MM
-
-
-
... More
FABRICATION (BUTT WELD)
-
-
-
... More
NB UTPO 1.5 INCH
10
-
-
... More
NB 2 INCH - 6 INCH
12
-
-
... More
NB 8 INCH - 14 INCH
336
-
-
... More
NB 16 INCH - 24 INCH
5500
-
-
... More
NB 28 INCH - 36INCH
4800
-
-
... More
FABRICATION (FILLET WELD)
-
-
-
... More
NB UPTO 1.5 INCH
10
-
-
... More
LAYING/ERECTION
-
-
-
... More
NB UTPO 1.5 INCH
10
-
-
... More
NB 2 INCH - 6 INCH
40
-
-
... More
NB 8 INCH - 14 INCH
1270
-
-
... More
NB 16 INCH - 24 INCH
2400
-
-
... More
NB 28 INCH - 36INCH
2350
-
-
... More
COATING AND WRAPPING OF UNDERGROUND PIPING:
-
-
-
... More
Supply & Application of all Cold Tape type coating and wrapping materials, manpower, equipments, consumables and necessary arrangements for surface preparation and application shall be in the scope of Contractor. Surface cleaning and preparation shall consist of cleaning and degreasing by Grit / Shot blasting and or power scraping, using most suitable method or a combination therefore, both followed by carefully removal of the dust according to the specification ISO 8501-1: 1988 SA 2.5.
The coating continuity shall be visually 100% checked by electric Holiday detector to detect and search of particles and other inclusion, pinholes, cavities, cracks and other ruptures. All defects visually detected or by Holiday detector shall be clearly marked and all defects in the coating shall be made good immediately after their inspection.
-
-
-
... More
COATING AND WRAPPING OF UNDERGROUND PIPING: As per C&W-TS (Attached with NIT DOCS)
-
-
-
... More
Cold Tape Type (Two layer = Inner wrap and Outer wrap.)
3400
-
-
... More
ERECTION OF VALVES
-
-
-
... More
Transportation loading/unloading from storage points to shop/site, (including testing of all kind of valves/ PSV/TSV and setting of safety valves but excluding testing of control valves which shall be issued from Owner/ Consultant's stores or instrument contractor's shop/stores), making necessary scaffoldings at all elevations, installation in position by threading, bolting or welding as per drawings, specifications, standards / codes, instructions of Owner/Consultant and scope of work defined in NIT. Welding shall include all the examination and inspection required such as but not limited to radiography, ultrasonic, magnaflux, dye check etc, pre and post heat-treatment wherever required.The cost towards radiography shall be paid separately as per SOR Item " RADIOGRAPHY", whereas the cost of all other tests is included in the rates quoted as per Schedule of Rates. Rates shall also include the cost of supervision, labour, Overhead / profits, consumables, statutory approval and conditions listed in preamble to Schedule of Rates and other associated arrangements required to execute all the related activities.The quoted rates shall also include tightening of gland packing, lapping and bonnet flange of valves if required during hydro-testing of piping. If any leakage or pressure drop found during testing in Valves/PSV,s then contractor will replace the Valves/ PSV's with repair, retest & install without any extra cost to owner.
-
-
-
... More
FLANGED/SCREWED VALVES
-
-
-
... More
Upto ¾”
5
-
-
... More
1” to 1½”
5
-
-
... More
2” to 4"
43
-
-
... More
6” to 8"
1
-
-
... More
10” to 12"
1
-
-
... More
SW/BW VALVES
-
-
-
... More
Up to 3/4"
548
-
-
... More
1" TO 1 1/2"
108
-
-
... More
NOTES: 1. WAFER TYPE VALVES shall be treated as flanged valves 2. Above includes valves of all materials, rating, IBR/Non IBR. 3. Above includes all types of valves. 4. Rates are inclusive of Installation/Removal of Control valves or any other type of valve during Pressure Testing/Testing. No extra payment will be made for the same.
-
-
-
... More
RADIOGRAPHY :-The unit rate shall include cost of radiograph viewer and films, consumables, scaffolding, manpower, overheads/profits etc. Payment shall be made only for those films after examination for joints found acceptable as per codes, standards & NIT. Films for defective joints shall not be paid. Overlapping Length of radiography film is not payable.
-
-
-
... More
At outside, the place of erection using film size
-
-
-
... More
3" wide film
7200
-
-
... More
4" wide film
58000
-
-
... More
In-situ (Erected position) using
-
-
-
... More
3" wide film
4200
-
-
... More
4" wide film
39800
-
-
... More
NOTES:
1. Length and width of film to be used which shall be decided by Owner before execution of radiography.
2. As a guide line the radiography film shall be used as below: -
i) 3" wide film shall be used up to 4" dia pipes
ii) 4" wide film shall be used above 4" dia pipes
3. Payment shall be made on the basis of weld length radiographed & for those joints which are found acceptable.
4. Length of radiographed film shall be calculated (O.D. x 3.14) in inch.
-
-
-
... More
STRESS RELEIVING :The unit rate shall include cost of SR, consumables, scaffolding, manpower, overheads/profits etc. Payment shall be made only for those sucessful for examination & found acceptable as per codes, standards & NIT.
-
-
-
... More
At outside, the place of erection using film size
11200
-
-
... More
In-situ (Erected position) using
7014
-
-
... More
PIPE SUPPORTS
-
-
-
... More
SUPPLY & FABRICATION OF PIPE SUPPORTS
-
-
-
... More
Supply & Fabrication of pipe supports as per drawings, standards, Specifications, NIT conditions & instructions of Owner/Consultant. The rate shall include the cost of materials, consumables, surface preparation & application of primer and painting, labour & overheads/profits etc. Supply & fabrication of all types of supports is in contractor scope.
-
-
-
... More
DETAILS OF PIPE SUPPORTS
-
-
-
... More
CATEGORY,MATERIAL OF CONSTRUCTION
-
-
-
... More
PS 1,Means carbon steel supports.
10
-
-
... More
PS 2,Means alloy steel supports
2
-
-
... More
PS 3,Means stainless steel supports
4
-
-
... More
PS 4,PUF supports for cold lines
1
-
-
... More
PS 5,Means Turn buckles (Forged)
1
-
-
... More
PS 6,Means Spring support
1
-
-
... More
ERECTION OF PIPE SUPPORTS
-
-
-
... More
Erection of supports fabricated by Contractor including primer/painting and/or supplied by vendors.The rate shall include cost of erection as part of piping, making necessary scaffoldings at all elevations, welding , labour, consumables, application of primer and finish paint, casting of civil padstel for trunion supports, casting of civil sleeper supports for piping, overheads/profits etc to complete all related activities as per NIT and instruction of Owner/ Consultant.
-
-
-
... More
PS 1,Means carbon steel supports.
10
-
-
... More
PS 2,Means alloy steel supports
2
-
-
... More
PS 3,Means stainless steel supports
4
-
-
... More
PS 4,PUF supports for cold lines
1
-
-
... More
PS 5,Means Turn buckles (Forged)
1
-
-
... More
PS 6,Means Spring support
1
-
-
... More
Notes
1. Irrespective of whether pipe supports and/or pipe support materials are supplied by Contractor or Owner or Vendor, all fasteners such as bolts, studs, nuts, washers etc., are to be supplied by Contractor at his cost.
2. Preference shall be given to PUF support to be used if required for cold insulation line.
3. Welding for supports shall include preheating and all tests (excluding radiography & stress relieving, which shall be paid separately as per SOR) such as dye-penetrent test, hardness test etc. as required by standards, codes, specifications and instructions of Owner/Consultant.
4. Turn buckles & Spring Supports shall be procured by contactor as per PDIL Engineering Standard.
5. For PUF Supports, density shall be 250 Kg/M3 and dimensions shall be same as for wooden supports. Both the inner and outer diameter surfaces shall have Aluminum facing.
-
-
-
... More
REINFORCING PADS FOR PIPES :- Supply of materials, consumables & Fabrication/erection of reinforcing pads for pipe connection wherever required and erection, fitup, welding & testing (including DP/MP) if required of the same and performing Positive Material Identification(PMI) using alloy analysers as per the specifications, drawings and instructions of the Engineer-in-Charge.
-
-
-
... More
BRANCH WELD WITH RP,24X16,CARBON STEEL,ASME B31.3
2
-
-
... More
BRANCH WELD WITH RP,30X20,CARBON STEEL,ASME B31.3
3
-
-
... More
BRANCH WELD WITH RP,30X14,CARBON STEEL,ASME B31.3
3
-
-
... More
BRANCH WELD WITH RP,30X10,CARBON STEEL,ASME B31.3
3
-
-
... More
BRANCH WELD WITH RP,30X8,CARBON STEEL,ASME B31.3
3
-
-
... More
BRANCH WELD WITH RP,30X2,CARBON STEEL,ASME B31.3
3
-
-
... More
BRANCH WELD WITH RP,48X20,CARBON STEEL,ASME B31.3
2
-
-
... More
BRANCH WELD WITH RP,8X3,STAINLESS STEEL,ASME B31.3
2
-
-
... More
BRANCH WELD WITH RP,8X2,STAINLESS STEEL,ASME B31.3
9
-
-
... More
BRANCH WELD WITH RP,18X8,STAINLESS STEEL,ASME B31.3
2
-
-
... More
BRANCH WELD WITH RP,18X3,STAINLESS STEEL,ASME B31.3
2
-
-
... More
PAINTING
-
-
-
... More
PIPING
-
-
-
... More
Supply & Application of paints and primers as per PDIL TS-2001/Drawings/docs, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects, drawings and direction of Engineer-in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied in the fabrication yard. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines.
-
-
-
... More
UNINSULATED (CS+AS) UP TO 94'C
-
-
-
... More
3/4"
2
-
-
... More
1"
2
-
-
... More
11/2"
2
-
-
... More
2"
460
-
-
... More
3"
930
-
-
... More
4"
705
-
-
... More
6"
1375
-
-
... More
8"
1475
-
-
... More
10"
3475
-
-
... More
12"
750
-
-
... More
14"
1280
-
-
... More
16"
1600
-
-
... More
18"
290
-
-
... More
20"
635
-
-
... More
24"
1500
-
-
... More
28"
55
-
-
... More
30"
1805
-
-
... More
42"
3100
-
-
... More
44"
180
-
-
... More
48"
4400
-
-
... More
UNINSULATED (CS+AS) 95'C TO 204'C
-
-
-
... More
3/4"
2
-
-
... More
1"
2
-
-
... More
11/2"
30
-
-
... More
6"
310
-
-
... More
12"
304
-
-
... More
MODIFICATION/EXTRA WORKS (IF ANY): -
-
-
-
... More
MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of Carbon Steel /Alloy Steel/Stainless Steel piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour, primer, painting and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge.
-
-
-
... More
FLAME CUTTING C.S PIPING
150
-
-
... More
FLAME CUTTING A.S PIPING
150
-
-
... More
HACKSAW CUTTING C.S PIPING
150
-
-
... More
HACKSAW/ PLASMA CUTTING S.S PIPING
150
-
-
... More
BEVELLING C.S PIPING
150
-
-
... More
BEVELLING S.S PIPING
150
-
-
... More
BEVELLING A.S PIPING
150
-
-
... More
Fit up & Welding C.S PIPING
150
-
-
... More
Fit up & Welding OF S.S. PIPING
150
-
-
... More
Fit up & Welding OF A.S. PIPING
150
-
-
... More
NOTE: 1. Rates shall include for IBR and Non IBR
2. CS shall include GI also
3. For other thickness, the rates shall be increased by direct proportion.
4. Rates for cutting shall include the cost of consumables, labour and other necessary arrangement related with & for this activity.
-
-
-
... More
LETTER STENCILLING
-
-
-
... More
Surface preparation,supply and application of primer and paint on uninsulated equipment, for lettering, stenciling on Pumps, Piping for the purposes of identification (Equipment Name, Equipment Number & Service Description) as per applicable painting specification enclosed elsewhere in the tender document, providing scaffolding for all heights, labour, materials, tools, tackles, supervision etc. to complete the work as per specifications and instructions of Engineer-in-Charge.
1500
-
-
... More
Assistance during PRE COMMISSIONING/COMMISSIONING
-
-
-
... More
Skilled (with hand tools, equipment/machinery, consumables): Welder, Millwright Fitter
50
-
-
... More
Semi Skilled (with hand tools): Pipe Fitter, Gas Cutter, Rigger, Electrician (for welding m/c).
50
-
-
... More
Unskilled: Helper, Khalasi.
50
-
-
... More
Note- EA: ONE MAN 8-HRS PER DAY
-
-
-
... More
PART-B (INSULATION)
-
-
-
... More
SUPPLY & APPLICATION OF INSULATION:
-
-
-
... More
HOT INSULATION
-
-
-
... More
PIPING:
-
-
-
... More
Insulation Thick. 25 MM For Pipe Size 1/2"
3
-
-
... More
Insulation Thick. 25 MM For Pipe Size 3/4"
5
-
-
... More
Insulation Thick. 60 MM For Pipe Size 3/4"
20
-
-
... More
Insulation Thick. 30 MM For Pipe Size 1"
4
-
-
... More
Insulation Thick. 60 MM For Pipe Size 1"
5
-
-
... More
Insulation Thick. 30 MM For Pipe Size 11/2"
2
-
-
... More
Insulation Thick. 30 MM For Pipe Size 2"
47
-
-
... More
Insulation Thick. 30MM For Pipe Size 3"
2
-
-
... More
Insulation Thick. 30 MM For Pipe Size 4"
10
-
-
... More
Insulation Thick. 30 MM For Pipe Size 6"
14
-
-
... More
Insulation Thick. 30 MM For Pipe Size 8"
18
-
-
... More
Insulation Thick. 80 MM For Pipe Size 8"
10
-
-
... More
Insulation Thick. 35 MM For Pipe Size 8"
235
-
-
... More
Insulation Thick. 35 MM For Pipe Size 10"
975
-
-
... More
Insulation Thick. 80 MM For Pipe Size 10"
680
-
-
... More
Insulation Thick. 25 MM For Pipe Size 12"
6
-
-
... More
Insulation Thick. 30 MM For Pipe Size 12"
30
-
-
... More
Insulation Thick. 25 MM For Pipe Size 14"(Mattress)
1410
-
-
... More
PIPING WITH OPERATING TEMPERATURE UP TO 400 DEG C & NOMINAL PIPE SIZE ABOVE TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Rock Wool Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.
-
-
-
... More
Insulation Thick. 40 MM For Pipe Size 20"
45
-
-
... More
Insulation Thick. 40 MM For Pipe Size 24"
2450
-
-
... More
Insulation Thick. 40 MM For Pipe Size 44"
94
-
-
... More
Insulation Thick. 40 MM For Pipe Size 48"
110
-
-
... More
PIPING WITH OPERATING TEMPERATURE from 401 DEG C to 500 DEG C & NOMINAL PIPE SIZE UP TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.
-
-
-
... More
Insulation Thick. 100 MM For Pipe Size 3/4"
6
-
-
... More
Insulation Thick. 100 MM For Pipe Size 1"
35
-
-
... More
Insulation Thick. 100 MM For Pipe Size 11/2"
12
-
-
... More
Insulation Thick. 160 MM For Pipe Size 12"
12
-
-
... More
PIPING WITH OPERATING TEMPERATURE from 401 DEG C to 500 DEG C & NOMINAL PIPE SIZE ABOVE 14” NB- Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Rock Wool Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.
-
-
-
... More
Insulation Thick. 175 MM For Pipe Size 20"
900
-
-
... More
Insulation Thick. 180 MM For Pipe Size 24"
790
-
-
... More
ALUMINUM FOIL WRAPPING ON S.S. SURFACE BEFORE INSULATION OF EQUIPMENT & PIPING:
-
-
-
... More
ALUMINUM FOIL WRAPPING ON S.S. SURFACE BEFORE INSULATION OF EQUIPMENT & PIPING: - Supply and application as per enclosed spec, inspection and certification by Owner / Consultant’s incharge.
70
-
-
... More
INSPECTION POCKETS
-
-
-
... More
Inspection pockets of sizes 4” X 4” to be made as instructions of Owner / Consultant at site.
4
-
-
... More
PART-C(CATHODIC PROTECTION)
-
-
-
... More
Design, detailed engineering, site survey
1
-
-
... More
Transformer Rectifier Unit
-
-
-
... More
Supply of Transformer Rectifier Unit (s), Dry type, naturally air cooled, suitable for outdoor installation in non-Hazardous area , AC operated rectifier unit shall have one input ‐ 415V AC +-10%, 3 Ph, 50Hz +-5%, AC and output shall be 75V / 50 A or per design of the Bidder with GPS based current interrupter, in built RMU/RTU and central Control and monitoring system with fibre optic communication system, as per Technical Specification - Cathodic Protection Transformer Rectifier Unit (PC183-TS-0824) . TRU/RTU shall have provision for connecting RS 485 communication cable also, in addition to the fibre optic connection
7
-
-
... More
Supply of Transformer Rectifier Unit (s), oil cooled, suitable for outdoor installation in Hazardous area , AC operated rectifier unit shall have one input ‐ 415V AC +-10%, 3 Ph, 50Hz +-5%, AC and output shall be 75V / 50 A or per design of the Bidder with GPS based current interrupter, as per Technical Specification - Cathodic Protection Transformer Rectifier Unit (PC183-TS-0824)
1
-
-
... More
Installation, testing & commissioning of above Transformer Rectifier Unit (s)
7
-
-
... More
MMO wire anode
-
-
-
... More
Supply of Factory prepackaged Longline MMO wire anode- 1.5 mm diameter with
piggy back cable -1c x 10 sq mm KYNAR/HMWPE and calcined petroleum coke breeze in an acid resistance fabric with splice kit
2250
-
-
... More
Installation of MMO wire anode
2250
-
-
... More
Canistered MMO Tubular anodes
-
-
-
... More
Supply of Canistered MMO Tubular anodes- 4 Amp Vertical anode ground bed using MMO tubular anode (25 mm dia. x 500mm long) of each 4A rating , with cable of 1c x 10 sq mm KYNAR/HMWPE, unarmoured of minimum length to reach the anode junction box without any splicing/jointing , supplied with a canister of size 0.2 mtr X 2 mtr filled with calcined petroleum coke breeze of bulk density 800-1000 kg/ m3.
105
-
-
... More
Installation of above Canistered MMO Tubular anodes
105
-
-
... More
In line splices Kit for jointing of MMO wire anode to anode tail cable
-
-
-
... More
Supply of In line splices Kit
25
-
-
... More
Installation of above In line splices Kit
25
-
-
... More
Junction Boxes: Supply, Installation & Testing of Junction Boxes of approved make, complete in all respects as given in the specification and SOW and directions of Site Engineer/ Engineer—in-Charge with all its accessories to ensure trouble free operation. **Junction Boxes installed in Zone- 1/Zone-2 area shall be flameproof (Ex’d’) type suitable for gas group IIA/IIB.
-
-
-
... More
Supply of Anode Junction box (flameproof) AJB with 12 connections AJB outdoor type, with suitable shunt & resistor Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box.
Canopy shall be provided for the AJB for rain water protection.
14
-
-
... More
Installation of above Anode Junction box (flameproof) AJB
14
-
-
... More
Supply of Cathode Junction box (flameproof) CJB with 5 connections, outdoor type, with suitable shunt & resistor Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box. Canopy shall be provided for the CJB for rain water protection.
7
-
-
... More
Installation of Cathode Junction box (flameproof)
7
-
-
... More
Monitoring Junction Box (Flameproof)
-
-
-
... More
Supply of Monitoring Junction Box (Flameproof) with 10 terminals outdoor type, Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box.
Canopy shall be provided for rain water protection, with Exd’ cable glands complete with mounting frame and foundation
7
-
-
... More
Installation of above Monitoring Junction Box (Flameproof)
7
-
-
... More
Permanent Reference Cells (Cu-CuSO4): Supply and Installation of Permanent Reference Electrodes of approved make with all its accessories to ensure trouble free operation.
Installation of permanent half cells including connecting the cable in the Junction Box/Test Station etc. with cable lugs, sealing material, laying of cable, testing& commissioning of cell etc. all complete with required material, excavation, backfilling etc. as per specifications, recommendation of cell supplier and directions of Site Engineer / Engineer-in-Charge.
-
-
-
... More
Pre-packaged Cu/CuSO4 electrode with chemical backfill and 1c x 6 mm2 XLPE/PVC cable, unarmoured of suitable length upto reference electrode junction box/ test station without any splicing
21
-
-
... More
Installation of above Reference Cells (Cu-CuSO4)
21
-
-
... More
Cables for PCP work / TCP work (if required). Supply, Laying, Installation, Testing & Commissioning of Cables of approved make with all its accessories to ensure trouble free operation. All Cables shall be annealed high conductivity, stranded copper conductor, 650/1100V grade, XLPE/PVDF insulated, PVC/HMWPE inner sheath, armoured/unarmoured, PVC (ST2) type outer sheath ,FRLS.
Laying of anode header / cathode header / monitoring/ reference cell cables and connection to the CP unit / pipeline / half cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC sleeve, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling etc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work complete in all respects including cost of all labour, material, tools etc. as per specification and instruction of site Engineer / Engineer—In—Charge and approved drawings.
-
-
-
... More
Anode tail Cable: 1C x 10 sqmm. Copper conductor PVDF/HMWPE, Unarmored
6500
-
-
... More
Cathode tail Cable 1C x 16 sq mm. Copper conductor, armoured
1050
-
-
... More
Ref. Cell Cable: 1C x 6 sq mm. Copper conductor, Un-Armored
1575
-
-
... More
Measurement Cable : 12 core x 1.5 sq mm. Copper conductor, Armored, screened
700
-
-
... More
Anode & cathode Header Cable: 1C x 50 sqmm. Al conductor, Armored
2100
-
-
... More
Supply of 6 Fiber multi mode FO Cable with all accessories for termination , this also include splicing, jointing as per requirement
1100
-
-
... More
Power supply cable between Power source(SS) or CP System PDB and T/R unit shall be 25mm2, stranded Aluminium conductor, 4-core, Aluminium wire armoured, XLPE insulated and PVC sheathed 1100V grade cable.
2100
-
-
... More
Handling, Laying , testing and commissioning of 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured/unarmoured, FRLS PVC outer sheathed cables including its termination directly buried, pulling through pipes including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge.
-
-
-
... More
Anode tail Cable: 1C x 10 sqmm. Copper conductor PVDF/HMWPE, Unarmored
6500
-
-
... More
Cathode tail Cable 1C x 16 sq mm. Copper conductor, armoured
1050
-
-
... More
Ref. Cell Cable: 1C x 6 sq mm. Copper conductor, un-Armored
1575
-
-
... More
Measurement Cable : 12 core x 1.5 sq mm. Copper conductor, Armored, screened
700
-
-
... More
Anode & cathode Header Cable: 1C x 35/50 sqmm. Al conductor, Armored
2100
-
-
... More
Handling, laying of 6 Fiber multi mode FO Cable with all accessories for termination , this also include splicing, jointing as per requirement
1100
-
-
... More
Power supply cable between Power source(SS) or CP System PDB and T/R unit shall be 25mm2, stranded Aluminium conductor, 4-core, Aluminium wire armoured, PVC insulated and sheathed 1100V grade cable.
2500
-
-
... More
Power distribution board
-
-
-
... More
Supply of CP Power distribution board for power supply to the TRUs The Power distribution board (PDB) shall be composed of one no.415 V 4 P 250A incoming MCCB and 6 Nos.415 V, 4 P 63A outgoing MCB for input power supply to TR Unit as well as 6No.6A outgoing DP MCB for central monitoring system power supply ( if required)
1
-
-
... More
Installation, testing & commissioning of above Power Distribution Board
1
-
-
... More
Supply of CP Power distribution board for Supply to the TRUs The Power distribution board (PDB) shall be composed of one no.415 V 4 P 125A, incoming MCCB and 3 no. 415 V, 4 P 63A outgoing MCB for input power supply to TR Unit as well as 6No.6A outgoing DP MCB for central monitoring system power supply ( if required)
2
-
-
... More
Installation, testing & commissioning of above Power Distribution Board
2
-
-
... More
Test Station
-
-
-
... More
Supply of Test Station with 2 nos 1c x 6 sq mm cable , Copper conductor, PVC insulated and PVC sheathed with 4" access pipe for RE installation. The test station shall be installed during TCP stage are utilized in PCP stage as well
32
-
-
... More
Installation, testing & commissioning of above Test Station
32
-
-
... More
Polarisation coupon Supply Installation, Testing of Polarization Coupons of approved make, complete in all respects as given in the specification and directions of Site Engineer/ Engineer—in-Charge with all its accessories to ensure trouble free operation.
-
-
-
... More
Polarization Coupons with two cables of 1c x 6 sq mm and 1c x 10 sq mm XLPE/PVC unarmoured of suitable length such as to reach Test Station connected to the coupon. The coupon shall be connected to the pipeline via a suitable rated magnetic reed switch
32
-
-
... More
Installation, testing & commissioning of above Polarisation coupon
32
-
-
... More
Thermit Weld
-
-
-
... More
Supply of Thermit Weld CA-15(1 lot of 20 lugs)
1
-
-
... More
Installation of above Thermit Weld
1
-
-
... More
Testing and commissioning of Cathodic protection system
1
-
-
... More
Post commissioning monitoring and maintenance of Cathodic protection system for 1 year, including one visit per month. In case, any rectification/material required for proper operation of Cathodic protection system, the same shall be in the scope of CP contractor
1
-
-
... More
TCP-Magnesium Ribbon anodes
-
-
-
... More
Supply of TCP-Magnesium Ribbon anodes (19.05 mm x 9.52 mm, 0.35kg/ m)with 1c x 6 sq mm XLPE/PVC cable for connection upto Test station provided every 70 mtr
2500
-
-
... More
Installation of TCP-Magnesium Ribbon anodes (19.05 mm x 9.52 mm, 0.35kg/ m)with 1c x 6 sq mm XLPE/PVC cable for connection upto Test station provided every 70 mtr
2500
-
-
... More
Spares
-
-
-
... More
4 ½ High resistance digital multimeter (Fluke make) or equivalent
1
-
-
... More
Portable Cu/ CuSO4 ref cells (Mc miller) or equivalent
1
-
-
... More
AC/DC Clamp ON meter (Fluke make) or equivalent
1
-
-
... More
TRU Spares for 7 TRU's
1
-
-
... More
D.C.Voltmeter
7
-
-
... More
D.C.Ammeter
7
-
-
... More
A.C.Voltmeter
7
-
-
... More
A.C.Ammeter
7
-
-
... More
Diodes
5
-
-
... More
SCR's
5
-
-
... More
D.C.Fuses for output side
7
-
-
... More
HRC fuse for Diodes
7
-
-
... More
A.C.fuses for input side
7
-
-
... More
D.C.Lightening arrestor
7
-
-
... More
A.C.Circuit breaker(MCB)
5
-
-
... More
Electronic Control Cards each type
7
-
-
... More
Filter circuit capacitor
7
-
-
... More
Signal light assembly for annunciation
7
-
-
... More
R.C. Surge Diverter
7
-
-
... More
Control transformer
7
-
-
... More
Coarse voltage control switch
7
-
-
... More
Coarse current control switch
7
-
-
... More
Fine voltage control switch
7
-
-
... More
Fine current control switch
7
-
-
... More
Auto Manual Mode selector switch
7
-
-
... More
Toggle switches
14
-
-
... More
Assorted Glass cartridge fuses
70
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements