Projects And Development India Limited Tender

3.5C x 120 mm2 (Al)

4C x 16 mm2 (Al)

3C x 2.5 mm2 (Cu)

MISCELLANEOUS ITEMS Supplying the following Equipment as per directions of Site Engineer / Engineer-in-Charge

Supply of LT megger with following featues: i) Test Voltage upto 1KV with 20% accurancy. ii) Selectable test voltages from 50V to 1KV with AC voltage measurement upto 600V. Iii) LCD display. iv) Self discharge function. v) Timer facility. vi) Automatic Polarisation Index calculation. vii) To have guard wire system. viii) Safety rating: CAT III 1000V, CAT IV 6000. ix) Short circuit current 200mA. x) Continuity function (200 mA). xi) Insulation test range upto 2Gohm. Megegr/Reputed equivalent

Supply of Earth megger with following featues: i) Resistance range from 0-20 ohms, 0-2000 ohms and 0-20 Kilo ohms. ii) Audible Alarm.. Iii) LCD display. iv) Resistance measuement with 1% accurancy. v) Chargable battery operated. Make-Megger/Reputed equivalent

Supply of Multi-meter with following features: i) Voltage - upto 1000V AC/DC. Ii) Current - upto 10A AC/DC. Iii) True RMS accurancy (DC-0.05%, AC-0.7%). iv) Resistance - upto 50 M ohm (accuracy 0.2%). v) Capacitance - upto 9999 µF (accuracy 0.1%). vi) Temperature without probe range (-200 to 1090 °C) and with probe (-40 to 260°C). vii) Saftey rating CAT III 1000V, CAT IV 600V. Make: Fluke/yokogava/Reputed equivalent

Supply of Tong Tester with following features: i) Flexible current probe can measure upto 2.5KA AC. Ii) Fixed jaw capacity to measure AC/DC upto 1KA. Iii) True RMS, Mean, Max., Avg. etc. iv) 1KV AC/DC voltage measurement. v) Resistance measurement. vi) Remote display feature. vii) safety rating CAT III 1000V, CAT IV 600V. Make: Fluke/yokogava/Reputed equivalent

DC Earth Tester (Grouser)

TWO YEARS OPERATION & MAINTENANCE SPARES (Item wise unit prices of following spares for two years operation and maintenance along with recommended quantity shall be quoted :

LIGHTING FIXTURE:LED Driver of Each type

LIGHTING FIXTURE:Heat resistant toughened glass cover of each type

LIGHTING FIXTURE:Cable glands of each type

LIGHTING FIXTURE:Allen keys of different sizes as applicable.

INTERLOCKING SWITCH SOCKET & PLUG: Switch of each rating

INTERLOCKING SWITCH SOCKET & PLUG: Fuse base of each rating

INTERLOCKING SWITCH SOCKET & PLUG: Fuse of each rating

INTERLOCKING SWITCH SOCKET & PLUG: Plug Top

FPB: 250 A 4P MCCB

FPB: 125 A TPN MCCB

FPB: 125 A TPN Contactor

FPB: 63 A TPN MCCB

FPB:Terminal block for 63A

FPB:Timer

FPB:Indication Lamp (each type & colour)

ELECTRICAL SUPPLY & SERVICE (Composite) PART-B :

WP DISTRIBUTION BOARDS : Supply, storage at site, handling, erection, trasnporation from store to site of installation, installation, testing and commissioning of flameproof/weather proof (IP-65) distribution board suitable for wall / structure mounting, Indoor /Outdoor type and the same shall be suitable for DIN rail mounting MCBs/MCCBs/RCCBs etc. with provision of both (top & bottom) entry with 3 Nos.LED phase indicating lamps in incomers. as per technical specification for lighting purpose including connection and termination of power cables, earthing wire and conduits etc. including supply & installation of double compression cable glands, suitable cable lugs & flameproof plugs for sealing all spare entries, connection and termination of all power cables, complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc. complete in all respect.

415 V,3 Ph &N, IP65, wall/structure mounted sheet steel enclosed Feeder pillar box consisting of 1 nos. incoming 125A 4P MCCB incomer with RYB indications and 6 nos. 63A TPN MCCB outgoing feeders as indicated in attached SLD for feeder pillar box enclosed with Technical specification PC 183-TS-0801.

415 V, 3 Ph & N, IP65, wall/structure mounted sheet steel enclosed Feeder pillar box consisting of 1 nos. incoming 250A 4P MCCB incomer with RYB indications and 4 nos. 125A TPN MCCB outgoing feeders as indicated in attached SLD for feeder pillar box enclosed with Technical specification PC 183-TS-0801.

Outdoor Type, wall/structural, flameproof, weatherproof (IP 65) Lighting Distribution board Type-I DB with Bus bar - 100 A TPN, Incomer - 1 no. 63 A TPN MCB & Outgoing - 9 nos. 16 A DP, MCB

LT CABLE JOINT (1.1 KV): Supply & Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem make, materials, labour, tools and tackles, consumables etc., as per drawings, specification and directions of Site Engineer / Engineer-in- Charge.

Power cables LT: OD upto 20 mm

Power cables LT: OD above 20 mm and upto 40 mm

Power cables LT: OD above 40 mm and upto 60 mm

LIGHTING POLES:

Supply, Erection and commissioning of hot dipped galvanised mild steel tubular swaged lighting poles 7M high ground mounted lighting poles (for 60W/90W LED fixtures) suitable for wind velocity of 150 Km/Hr and along with suitable pole junction box, cable galnds and lugs, including supply and installation of earthing conductor of 25x6 mm GI strip/8 SWG GI wire nuts, bolts as sepcified in specification as well as transportation of required items at site and installation of poles, supply & installation of Weatherproof pole junction box (with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, supply of requisite double compression glands/ suitable lugs with looping arrangement and termination of 2nos. 3C X 2.5 sq. mm. & 2 nos. 4 x 16 sq. mm armoured Cu/Al PVC/XLPE insulated cable from JB to light fittingcable termination, necessary hardware required for excavation, providing concrete foundation (ratio of cement : sand : stone chips = 1:2:4) for ground installation, disposal of surplus earth within 30 m lead, earthing and painting with all labour to make installation complete in all respect as per instruction and directions of Engineer-in-charge.

Supply, Erection and commissioning of hot dipped galvanised mild steel tubular swaged lighting poles 9M high ground mounted lighting poles (for 60W/90W/120W LED fixtures) suitable for wind velocity of 150 Km/Hr and along with suitable pole junction box, cable galnds and lugs, including supply and installation of earthing conductor of 25x6 mm GI strip/8 SWG GI wire, nuts, bolts as sepcified in specification as well as transportation of required items at site and installation of poles, supply & installation of Weatherproof pole junction box (with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, supply of requisite double compression glands/lugs with looping arrangement and supply and termination of 2nos.3C X 2.5 sq. mm. & 2 nos. 4x16 sq. mm armoured Cu/Al PVC/XLPE insulated cable from JB to light fittingcable termination, necessary hardware required for excavation, providing concrete foundation (ratio of cement : sand : stone chips = 1:2:4) for ground installation, disposal of surplus earth within 30 m lead, earthing and painting with all labour to make installation complete in all respect as per instruction and directions of Engineer-in-charge.

High Mast

Supply, unloading, storage, handling, transporation within site from store to site of installation, erection, including civil foundation and pile design as required, erection, installation and testing of 30M high mast shaft in three sections suitable for wind speed as Per IS-875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 24 nos luminaries of BENP-20FL-350W LED of approved make in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, including 1 set foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. This includes Supply and installation of 24 nos. Integral LED Flood Light Luminaire with complete set of lamp & drivers as per technical specification the following components: Aluminum Cast luminary body, Electronic Circuit & LED drivers, Weather proof Transparent Cover, Luminary Mounting Clamps, LED Assembly.1 set Within Luminary Interconnection. Supply and installation of 2 nos. LED type single dome aviation obstruction light is also required with one high mast. This also includes Supply and installation of 1 no. outdoor stand mounted feeder pillar with 63A, 4-pole MCCB incomer, astro timer switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button,Incoming and outgoing terminals suitable for required cable size(cable size shall be indicated during detail engg).. The Control Panel shall be of weather proof .Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast and a separate down conductor (1Rx1Cx35 sq mm Aluminium Flexible Cable) shall run from the lightning finial to an earthing bolt independent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast shall be weather proof.

Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete in all respects as per specifications, drawing and the direction of the EIC/Site Engineer. 300 mm dia

Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete in all respects as per specifications, drawing and the direction of the EIC/Site Engineer.200 mm dia

EARTH ELECTRODE

Supply Installation, testing and commissioning of 3.8M, 100mm dia. heavy G.I. Pipe earth electrode having 100 micron zinc coating for earthing including the supply and installation of the CI cover, charcoal /special backfill etc as per Technical Specifications EM250-TS-0801 complete with all accessories like earth bus, GI links for earth Pit connection etc. The hot dip galvanizing (minimum Zinc coating of 610 gms. / sq. mtr. as per IS-2629) shall be done after all fabrication. The electrodes shall be made from one piece length of pipeas per earthing layout drawings including digging the earth upto required depth, erecting safe earth electrode, disposal of surplus earth (as directed by engineer-in-charge) and back filling of the pit as required including supply of erection material providing necessary brick works and other civil works, fixing G.I. L-shaped test links and brackets, twisted piece and connecting to it earth electrodes and earth strips with all labour and materials to complete installation work in all respect as per approved drawings, specifications and directions of Engineer-in-charge.

Supply Installation, testing and commissioning of Intermidiate Earth Pit (ICP) i.e earth pit without electrode including the supply and installation of the CI cover, c etc as per Technical Specifications EM250-TS-0801complete with all accessories like earth bus, GI links for earth Pit connection etc. The job shall includine digging the earth upto required depth, erecting safe earth electrode, disposal of surplus earth (as directed by engineer-in-charge) and back filling of the pit as required including supply of erection material providing necessary brick works and other civil works, fixing G.I. L-shaped test links and brackets, twisted piece and connecting to it earth electrodes and earth strips with all labour and materials to complete installation work in all respect as per approved drawings, specifications and directions of engineer-in-charge.

EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect.

75 mm X 10 mm G.I. earthing strip

50 mm X 6 mm G.I. earthing strip

32mm X 6 mm G.I. earthing strip

25mm x 6 mm G.I. earthing strip

GI wire Rope (8 SWG)

GI wire / rope 10 mm diameter

GI PIPE/HDPE PIPE

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge. :25 mm

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge. :50 mm

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge.:100 mm

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge.:150 mm

Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge.:200 mm

Supply, Laying of HDPE 32mm dia 3mm thcik as per IS 7238 grade 80 Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Optical Fibre Cable in HDPE pipe, carrying out end to end testing of laid Optical fibre cables by taking OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and installation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom / Control System Works Contractor in commissioning of Local Area Network.

Supply, fabrication, erection, installation of steel structural works of any type and shape such as Panel, cable trays, push button control posts etc., as required job complete in all respects including the cost of all labour, tools, material, Painting etc., complete.and as per specifications and directions of site engineer/ Engineer-in-Charge.

Supply, Fabrication & installation of 2 mm thick Al sheet for rain protective hood for outdoor equipment e.g switch sockets, junction boxes etc.

WP JUNCTION BOX CUM SPLITTER BOX Supply, erection, installation, testing and commissioning of weather proof junction box cum splitter box for providing cable termination, 32 Amps Wall/ Frame mounting Junction Box, having front opening provided with hinged cover & tightening bolts to tight it with box,with Tinned Copper busbar for termination of R, Y, B & N, with WP enclosure, having IP65 Protection, material of constructions shall be Cast Aluminum Alloy (LM6) finished in Grey Epoxy paint shade 631 as per IS: 5 with all hardware of Stainless Steel (SS304including connection and termination of earthing wire and conduits etc., 1 No. inside and 2 Nos outside Earthing terminals. Including supply & installation of double compression cable glands & Weather proof plugs for sealing all spare entries complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect.

4 way junction box with 1 no bottom entry holes suitable for incoming cable size of 3.5X50 sqmm AYFY and 9 nos. bottom entry holes for outgoing cables size 3Cx2.5 sqmm (Cu) shall be provided in the splitter box.

WP SWITCH CUM SOCKET : Supply, erection, installation, testing and commissioning of flameproof/ weatherproof switch cum socket /welding receptacle having IP65 protection of approved makes to be installed on walls, coloumns, structures, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries etc., including connection and termination of earthing wire and conduits., etc. complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc. complete in all respect.

250 V,15 A switch cum socket with plug (Weather proof)

415V, 63A, Switch & Socket with Plug (No. of Pins 3P +N+ E),(Weather proof)

FLAMEPROOF /WP LIGHTING FIXTURES & ACCESSORIES: Supply,Installation, connection, testing and commissioning of pre-wired 240V AC,1-Ph, WP/Flame proof LED Lighting fixtures including LED lamp with driver and JB for looping of cables of following type which shall be suitable for use in safe area hazardous area Zone-1, Gas Group IIA/B, Temperature class T3 having IP-65 degree of protection complete with all accessories, double compression Ni-plated brass cable glands & lugs, blanking plugs etc. as specified in Technical specification PC 183-TS-0801 and all hardware for fixing the lighting fittings with structure/ lighting pole including cable glanding, crimping of lugs on cable conductor & connecting cables at fixtures, earthing, junction boxes, etc. including supply of all connecting materials like clamps, supports, conduits, down rods etc. as required as well as transportation from store to site of erection with all labour and material to make installation complete in all respect as per approved drawings, specifications and directions of Engineer-in-charge. The rates shall be valid for all mounting heights.

60 W LED Well Glass, Ex-’d’ flameproof WP type lighting fixtures including LED lamp/chip with driver complete with flameproof cable glands, plug suitable for 3 X 2.5mm2 XLPE-A-PVC cable and stopping plug.

45 W LED Well Glass, WP type lighting fixtures including LED lamp/chip with driver with increased safety cable glands, plug suitable for 3 X 2.5mm2 XLPE-A-PVC cable and stopping plug.

120 W LED Flood light, WP type lighting fixtures including LED lamp/chip with driver with increased safety cable glands, plug suitable for 3 X 2.5mm2 XLPE-A-PVC cable and stopping plug.

WP STREET LIGHTING FIXTURES AND ACCESSORIES

Supply ,unloading, storage, handling, transporation within site from store to site of installation , Installation, connection, testing and commissioning of pre-wired 240V AC,1-Ph, hose and weather proof 70W LED street Lighting fixtures including led lamp/chip, driver etc. of approved make having IP-65 degree of protection and suitable for use in safe area complete with all accessories and all hardware for fixing the lighting fittings with pole including supply & fixing of double compression Ni-plated brass cable glands & lugs, blanking plugs etc. as specified in Technical specification EM250-TS-801.

Supply ,unloading, storage, handling, transporation within site from store to site of installation, Installation, connection, testing and commissioning of pre-wired 240V AC,1-Ph, hose and weather proof 120W LED street Lighting fixtures including led lamp/chip, driver etc of approved make having IP-65 degree of protection and suitable for use in safe area complete with all accessories and all hardware for fixing the lighting fittings with pole including supply & fixing of double compression Ni-plated brass cable glands & lugs, blanking plugs etc. as specified in Technical specification PC183-TS-801.

Supply ,unloading, storage, handling, transporation within site from store to site of installation, installation, connection,testing and commissioning of pre-wired 240V AC,1-Ph., hose and weather proof 120W LED street Lighting fixtures including led lamp/chip, driver and 1.5 meter bracket with all accessories of bracket, Weatherproof pole junction box (with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, supply of requisite double compression glands & suitable lugs with looping arrangement and termination of 2nos. 3C X 2.5 sq. mm. & 2 nos. 4 x 16 sq. mm armoured Cu/Al PVC/XLPE insulated cable from JB to light fitting cable termination, necessary hardware etc approved make having IP-65 degree of protection and suitable for use in safe area complete with all accessories and all hardware for fixing the lighting fittings with pole including supply & fixing of double compression Ni-plated brass cable glands & lugs, blanking plugs etc. as specified in Technical specification PC183-TS-0801.

MANUAL ROTATING SEARCH LIGHT FOR WATCH TOWER

Supply, unloading, storage, handling, transporation within site from store to site of installation , Installation, connection, testing and commissioning of pre-wired 240V AC,1-Ph, weatherproof 200W LED rotating search cum flood light Fixtures arrangement for watch towers including led lamp/chip, driver having IP-65 degree of protection and including UDCA STAND suitable for mounting of search light on roof of the watch tower with all accessories of bracket, Weatherproof pole junction box (with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, supply of requisite double compression glands & suitable lugs with looping arrangement and termination of 2 nos. 3C X 2.5 sq. mm. & 2 nos. 4 x 16 sq. mm armoured Cu/Al PVC/XLPE insulated cable from JB to light fitting cable termination, necessary hardware etc approved make having IP-66 degree of protection and suitable for use in safe area complete with all accessories and all hardware for fixing the lighting fittings with pole including supply & fixing of double compression Ni-plated brass cable glands & lugs, blanking plugs etc. as specified in Technical specification PC183-TS-0801.

Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Supply and laying of approved quality 75 mm thick second class brick flat soling, labour, load and lift charges , tools and tackles etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, backfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.

Supply, Installation , testing and commissioning of 240V, 1-Ph, Wall Mounting Fans / Exhaust Fans / Ceiling Fans (with Electronic Regulator) / Man Cooler Fans etc on wall / Ceiling / Steel Structure including supply, fabricating and grouting of MS Frame / Hooks and other hardware etc.

Supply,Installation, testing and commissioning of 240V room lighting boards along with required wiring (concealed in PVC conduit / on wall) having following features:- 1 No. Switch & Socket for 6 / 16 Amp 2 Nos. 6 Amp switches for lighting

Supply,Installation, testing and commissioning of 240V room lighting boards along with required wiring (concealed in PVC conduit / on wall) having following features:- 1 No. Switch & Socket for 6 / 16 Amp 5 Nos. 6 Amp switches for lighting

ELECTRICAL SERVICE (PART-C) :

CABLE LAYING: Laying of all type of cables HT/LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and installation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge

Power Cables LT (1.1 KV)( PVC / XLPE / Armoured / Unarmoured / Power / Control / Signalling) Cables - Power cables LT : OD upto 20 mm

Power Cables LT (1.1 KV)( PVC / XLPE / Armoured / Unarmoured / Power / Control / Signalling) Cables- Power cables LT : OD above 20 mm and upto 30 mm

Power Cables LT (1.1 KV)( PVC / XLPE / Armoured / Unarmoured / Power / Control / Signalling) Cables- Power cables LT : OD above 30 mm and upto 40 mm

Power Cables LT (1.1 KV)( PVC / XLPE / Armoured / Unarmoured / Power / Control / Signalling) Cables-Power cables LT : OD above 40 mm and upto 60 mm

Power Cables LT (1.1 KV)( PVC / XLPE / Armoured / Unarmoured / Power / Control / Signalling) Cables-Power cables LT : OD above 60 mm

EXCAVATION AND BACK FILLING

Excavation 22000 mtr. Length x 350 mm x 700 mm deep for laying of cables including disposal of excavated earth, lead up to 100 mtrs. and lift up to 1.5 mtrs., disposed earth to be levelled and neatly dressed.

Back filling with excavated earth in trench including consolidating each deposited layer by  ramming, dressing etc.

WBM ROAD / CONCRETE BREAKING : WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge