Pradhan Mantri Gram Sadak Yojana Tender
... More
The PMGSY has issued a formal invitation for competitive bids for the Pradhan Mantri Gram Sadak Yojana project, for Improvement To Shyamsundarpur Dhobanisole Road in Mayurbhanj, Odisha, with an estimated contract value of Rs. 11,21,84,000. The bid opening date for this tender is 10-06-2025 and the last date for bid submission is 26-06-2025. Interested bidders for Pradhan Mantri Gram Sadak Yojana tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Pradhan Mantri Gram Sadak Yojana - PMGSY Tender
Civil And Construction
Road Construction
Eprocure
Opening Date10 Jun 2025
Closing Date26 Jun 2025
Tender Amount₹ 11,21,84,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class of Contractor
Technical Capacity
... View More
The required prior work experience for the bidder includes having completed similar works with a value of at least 75% of the estimated cost put to tender during any three financial years taken together in the last preceding five years, excluding the current financial year. This applies to both road works and bridge works. The bidder should have completed similar works with a value of at least 75% of the estimated cost put to tender during any three financial years taken together in the last preceding five years. For road works, the total financial turnover in respect of civil engineering works should be at least 60% of the amount put to tender during any one financial year of the last preceding five financial years. For bridge works, the total financial turnover in respect of civil engineering works should be at least the amount put to tender during any three financial years taken together of the last preceding five financial years. Additionally, the bidder should have an annual turnover of at least 200% of the annual payment of the work put to tender for civil construction works. The bidder is required to submit a list of projects executed that are similar in nature to the work, which includes details of similar works experience. The bidder should also have a bid capacity of more than the estimated cost of the work. The bidder is required to furnish the information on Annual Turn Over (ATO) from his Chartered Accountant showing clearly the financial year wise value of Civil Engineering works executed with updated values. The required prior work experience for the bidder includes similar nature of work, with specific requirements as follows: 75% of the estimate cost put to tender during any three financial years taken together in the last preceding five years (starting from 2020-21 to 2024-25) excluding the current financial year 2025-26 for road works, and 75% of the estimate cost put to tender during any three financial years taken together in the last preceding five years (starting from 2020-21 to 2024-25) excluding the current financial year 2025-26 for bridge works. The annual turnover requirement is: - Minimum requirement of annual turnover of Civil construction works @200% of annual payment of the work put to tender, - The total financial turnover in respect of civil engineering works of an amount not less than 60% of the amount put to tender during any one financial year of the last preceding five financial years starting from 2020-21 to 2024-25 excluding the current financial year for road works, and - The total financial turnover in respect of civil engineering works of an amount not less than the amount put to tender during any three financial years taken together of the last preceding five financial years starting from 2020-21 to 2024-25 excluding the current financial year for bridge works. The required bid capacity is to be more than the estimated cost of the work.
Costs
EMD
₹ 10,67,010Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Improvement To Shyamsundarpur Dhobanisole Road
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CERWI_114325_1Tender No
Road Online N.C.B. No-376Tender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other sturcture comprising of masonry, cement concrete wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials and stacking the serviceable materials with all lifts and lead of 1000m as per Technical Specification Clause 202
120
840
-
... More
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means, spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of MoRTH specifications for Road & Bridge works (4th revision) but excluding the charges of GST etc complete as per specification & direction of Engineer-in-Charge..
27256.25
251
-
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge (excluding cost of excavation and transportation to site).
3952.74
50
-
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m
3467.51
74
-
... More
Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250 gms per sqm area,thicknessof 2.5mm is exclusive of surface applied glass beads as per IRC:35.
1225.23
354
-
... More
Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials but excluding the charges of GST etc. complete as per the direction of the Engineer-in-Charge.
25979.72
28
-
... More
Construction of granular Sub base by providing close grade granular sub-base grading-III material as per table-100-1. spreading in uniform layers with motor grader om prepared surface,mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MOSRT&H specifications for road and Bridges work.
2195.97
2321
-
... More
Providing , Laying, spreading and compacting graded stone aggregates in Wet Mix Macadam as per specification including premixing material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with paver in sub-base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MORTH specifications for road & bridge works (4th revision) but excluding the charges of GST including cost conveyance required as directed by Engineer-in-Charge.
4619.57
2824
-
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means and including cost conveyance & royality of all materials & cost of all labour & T&P required for the work hire charges of machinaries etc complete but excluding the charges of GST as per Technical specification clause 502 of MORD for low porosity surface but excluding the charges of GST etc complete as per specification & direction of Engineer-in-Charge.
29458.11
37
-
... More
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 503 of MORTH specification for road & bridge works (4th revision) etc complete but excluding the charges of GST etc complete as per specification & direction of Engineer-in-Charge.
29458.11
13
-
... More
Providin & laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensore control to the required grade, level & alingment & roling with smooth wheeled,vibratory & tandem rollers to achieve the desire compaction as per clause 504 of MoSRT&H Specifications for road and bridge works (4th Revision)
1472.91
8852
-
... More
Providing & laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher to the required grade,level & allignment and rolling with smooth wheeled ,vibratory and tandem roller to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (Latest Revision) but excluding the charges of GST etc complete including cost conveyance etc required as per specification & direction of Engineer-in-Charge.
736.45
10732
-
... More
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 grade cement or any other type as per Clause 1501.2.2, M30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridges and culverts (expansion joints), admixtures as approved, curing of concrete slabs for 14 days, curing compound and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.
435
7257
-
... More
Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge.
1037.27
270
-
... More
Filling sand-Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge.
308.93
1251
-
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 of MoRD but excluding the charges of GST & as per direction of the Engineer-in-Charge.
-
-
-
... More
600 mm dia Single row
55
2827
-
... More
1000 mm dia Single row
60
6387
-
... More
1000mm dia Double row
10
6387
-
... More
Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specification Clauses 1000 and 1200 of MoRD and as per direction of the Engineer-in-Charge.
143.536
9074
-
... More
PCC M-15 grade in foundation bed using 40mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator & all leads and lifts as per approved drawing & technical specification and as per section 1700& 2100 of MORTH specification for road and bridge works (latest revision) but excluding the charges of GST including cost conveyance etc required as directed by Engineer-in-charge.
-
-
-
... More
Foundation
556.99
5961
-
... More
Sub-Structure
710.71
6103
-
... More
R.C.C work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Foundation
43.2
7167
-
... More
Substructure
36.45
9144
-
... More
Superstructure
60.87
10025
-
... More
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3
14.4
2325
-
... More
PCC M-20 grade in foundation bed using 40mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator & all leads and lifts as per approved drawing & technical specification and as per section 1700& 2100 of MORTH specification for road and bridge works (latest revision) but excluding the charges of GST including cost conveyance etc required as directed by Engineer-in-charge.
9.26
6517
-
... More
R.C.C M-30 grade in wearing course using 20mm and down grade BHGCB chips of approved quality from approved quarry including hoisting lowering and laying in position in layers with proper packing and ramming by means of vibrator to proper slope and level including watering and curring with cost conveyance royality of all materials required for the work including all labour,T&P for the work etc complete but excluding the charges of GST in all respect as per the specification and direction of Engineer-in-charge.
8.25
7184
-
... More
Providing and laying Filter media with granular crushed aggreates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wingwall return wall to the full height compared to firm condition complete as per drawing and technical specificationn clause 1204.3.8 including cost conveyance but excluding the charges of GST etc required as directed by Engineer-in-charge.
91.25
2880
-
... More
Providing Rough stone dry packing/pitching in slope protection wall approns and revetments to designed thickness using hard granite stones of required size of approved quality from approved quarry including quarrying supplying cinveying and cost conveyance royality of all materials including T&P complete including filling the interstices with small stones by wedging and hammering finished to proper slope and level but excluding the charges of GST as per direction of the Engineer-in-charge including dewatering if required.
72.48
2368
-
... More
Providing Weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 of MORD specification for Rural roads but excluding the charges of GST and as per direction of Engineer-in- charge.
251
111
-
... More
Reinforced cement concrete M15 grade Kilometer stone/ local stone of standard design as per IRC:8 fixing in position including painting & printing etc. as per the drawing &technical specification clause 1703 of MoRD but excluding the charges of GST and as per direction of Engineer-in-Charge.
-
-
-
... More
Fixing of 5th. Km. Stone
1
3939
-
... More
Fixing of Km. Stone
6
2302
-
... More
200 mm Stone (Precast)
23
687
-
... More
Guide Post (M-20)
174
714
-
... More
Supplying, fitting, fixing of roads sign board as per approve drawing including cost, conveyance, royality, taxes of all materials, labour, T & P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm. 60cm below ground level as per approved drawing including excavation, curring but excluding the charges of GST etc. complete as per MoRD Technical Specification Clause 1701 and as per direction of Engineer-in-charge.
-
-
-
... More
Information signs
2
139470
-
... More
Providing and fixing of typical MMSY Citizen sign board with logo as per MORD specifications and drawing. Two MS plates of 2mm thick, top & middle plate duly welded with MS flat iron 25mmx5mm size on back on edges. The flat iron frame of both plate will be welded to 2nos 75mmx75mm of 12SWG sheet tubes posts duly embeded in C.C. M-15 grade blocks of 600mmx600mmx750mm, 750mm below ground level. The top most dimond plate will be welded to middle plate by 47mmx47mm of 12SWG steel tube. All M.S. will be stove enameled on both sides. Lettering & printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quailty in required shade & colour. All sections of framed posts & steel tubes will be painted with primer & two coats of paint as per drawing clause 1701 and Annexure 1700.1
2
8998
-
... More
Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 etc complete including cost conveyance etc required as per specification but excluding the charges of GST & direction of Engineer-in-Charge.
-
-
-
... More
600mm equilateral triangle
17
2088
-
... More
600mm Circular
17
1942
-
... More
Maintenance
-
-
-
... More
Restoration of Rain-cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh materials in layers not exceeding 250mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per clause 1902 of MORD specification for Rural roads by manual means and as per direction of Engineer-in -charge.
-
-
-
... More
1st Year
36.54
390
-
... More
2nd Year
48.6
390
-
... More
3rd Year
61.02
390
-
... More
4th Year
73.08
390
-
... More
5th Year
85.14
390
-
... More
Maintenance of Earthen shoulder (filling with fresh selected soil) Making up loss of materials/ irregularities of shoulders to the design levels by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000m as per clause 1903 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
-
-
-
... More
1st Year
121.8
48
-
... More
2nd Year
161.99
48
-
... More
3rd Year
203.41
48
-
... More
4th Year
243.6
48
-
... More
5th Year
283.79
48
-
... More
Maintenance of earthen shoulder Stripping of excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per clause 1903 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
-
-
-
... More
1st Year
121.8
18
-
... More
2nd Year
161.99
18
-
... More
3rd Year
203.41
18
-
... More
4th Year
243.6
18
-
... More
5th Year
283.79
18
-
... More
Maintenance of Bituminous surface road i.e. repair to pot holes and removal of loose materials, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat as per clause 1904.2 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
-
-
-
... More
1st Year
957
330
-
... More
2nd Year
1311.09
330
-
... More
3rd Year
1665.18
330
-
... More
4th Year
2019.27
330
-
... More
5th Year
2394.41
330
-
... More
Maintenance of Hume Pipe culverts by way of clearing , cleaning erosion repair, repair to crack, parapet wall and protection work as per clause 1908 of MORD specification for Rural roads and as per direction of Engineer- in- charge.
-
-
-
... More
1st Year
21
1713
-
... More
2nd Year
21
1713
-
... More
3rd Year
21
1713
-
... More
4th Year
21
1713
-
... More
5th Year
21
1713
-
... More
Maintenance of 200 m stones and km stones by way of refixing of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200mtr. and KM. stone and 5 km stone as per clause 1912 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
-
-
-
... More
1st Year
5.8
871
-
... More
2nd Year
5.8
871
-
... More
3rd Year
5.8
871
-
... More
4th Year
5.8
871
-
... More
5th Year
5.8
871
-
... More
Cutting of branches of trees from Roadway or with a R.O.W. including disposal of wood and leaves to suitable location as per clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
-
-
-
... More
1st Year
58
176
-
... More
2nd Year
77
176
-
... More
3rd Year
97
176
-
... More
4th Year
116
176
-
... More
5th Year
135
176
-
... More
Cutting of shrubs from roadway or with in R.O.W. and disposal of shrubs to suitable location as per clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
-
-
-
... More
1st Year
232
10
-
... More
2nd Year
309
10
-
... More
3rd Year
387
10
-
... More
4th Year
464
10
-
... More
5th Year
541
10
-
... More
Trimming of grass and weeds from shoulder ,berms and disposing off the same to suitable location as per clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
-
-
-
... More
1st Year
121.8
3
-
... More
2nd Year
161.99
3
-
... More
3rd Year
203.41
3
-
... More
4th Year
243.6
3
-
... More
5th Year
283.79
3
-
... More
Bridge Work
-
-
-
... More
Earth work in excavation for foundtion of structures upto 3 m depth as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material dressing of sides and bottom and backfilling in trenches excavated suitable material.
1989.955
270
-
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m
5390.114
74
-
... More
Earthwork in excavation in foundation in hard rock within the initial lead and lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth etc complete as per the direction of the Enngineer in Charge.
157.62
604
-
... More
Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost. , conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work with cess etc complete as per specification & direction of Engineer-in Charge.
40.5
1251
-
... More
Cement concrete of M-150 having maximum compressive strength of 150 kg./cm2 ( test to be conducted) on 150 mm. cubes tested at 28 days including curing (tests conducted in accordance with IS-456 & IS-516) & conforming to clause-302 of IRC 21/1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory) obtained from approved quarry the proportion mix, grading conforming to relevant ISI/IRC codes including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering & curing for 28 days centering shuttering & finishing the exposed surface smooth providing grooves & beads where necessary including cost, conveyance royality & taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering & shuttering as per specification & direction of Engineer-in-Charge
-
-
-
... More
In Foundation
40.5
5961
-
... More
In Sub structure
910.11
6103
-
... More
Cement concrete (1:3:6) in foundation & plinth with 4cm. crusher broken granite metal of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator ,providing groove & beads where necessary including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge
-
-
-
... More
In Foundation
177.794
5760
-
... More
In Substructure
9.211
5824
-
... More
RCC of design mix of M-25grade having specified characteristics compressive strength/ target mean strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm. down graded.sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)
-
-
-
... More
Deck Slab
352.352
10566
-
... More
Railing & post
122.6
2650
-
... More
RCC of design mix of M-30grade having specified characteristics compressive strength/ target mean strength of 300kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)
-
-
-
... More
Foundation.
366.223
6700
-
... More
Abutment & Pier Shaft
344.043
8535
-
... More
Abutment & pier cap
13.22
8241
-
... More
Dirt wall
2.484
11763
-
... More
Retaing Wall / Wing Wall
82.487
15285
-
... More
Approch slab
19.266
7067
-
... More
Providing HYSD bars confirming to approved grade F-415 including all labours for cutting ,bending, binding, lapping, splicing, welding etc. (conforming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance of tor steel & binding wires of 18 to 20 gauge(as to be approved by the Deptt.) etc. complete with Cess in all respect (weight of binding wire shall not be considered for payment at all which will be borne by the contractor) as per specification and direction of the Engineer in charge.
1371.742
9074
-
... More
Back filling behind abutment, wing wall & return wall with granular material including all cost, carriage, royality & labour as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Granular Material
186.646
1090
-
... More
Sandy Material
1478.683
1212
-
... More
Providing weep hole in plan / Reinforced concrete abutment, wing wall / retaining wall with 100mm dia A.C. Pipe, extending through the full width of the structure with slope of 1V : 20 H towards drawing face complete as per drawing and technical specification and direction of Engineer in charge.
225
111
-
... More
Providing and laying 25 mm mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29. prepared by using mastic cooker and laid to required level and slope after cleaning the surface,including providing antiskid surface with size at the rate of 0.005 cum per 10 sqm and at an approxmate spacing of 10 cm center to center in both direction ,pressed into surface when the temperature of surface is not less than 1000C,protruding 1 mm to 4 mm over mastic surface all complete as per clause 515
805.5
1587
-
... More
Providing and laying of Filter media with stone crushed aggregates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surfact behind abutment,wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification & direction of Engineer-in Charge.
120.317
2880
-
... More
Providing Rough stone dry packing / pitching in slope, protection walls, approns and revetments to designed thickness using hard granite stones of required size of approved quality from approved quarry including quarrying supplying conveying and cost conveyance taxes royalty of all materials including T&P complete including filling the interstices with small stones by wedging and hammering finished to proper slope and level as per direction of the Engineer – in – charge including dewatering if required.
876.766
2368
-
... More
Supplying and fixing of RCC Guard post of 150 mm dia and IM long in RCC (1:2:4) using 20mm down graded size h.g chips including all labours, materials ,carriage ,royality & taxes of etc. complete.
104
714
-
... More
Providing fitting and fixing of expansion joint
-
-
-
... More
Strip seal Expansion Joint
45
12289
-
... More
Fixing of Salitax Board
38.631
1526
-
... More
Gravel Backing to revetments
90
1116
-
... More
Providing and laying Tar paper
58.271
17
-
... More
Painting two coats with approved paints including Cost,labour, materials etc complete & direction of Engineer-in-Charge.
848.497
116
-
... More
Dismantling of Existing Structures like Culverts,bridges,retaining walls and other structure comprising of masonary,cement concrete,wood work,steel work,including T&P and scaffolding whereever necessary,sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000metrs.
163.5
840
-
... More
Fixing of Sign Board as per specification and direction of Engineer-in-Charge.
1
50000
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%