Pradhan Mantri Gram Sadak Yojana Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Pradhan Mantri Gram Sadak Yojana - PMGSY Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Apr 2022
Closing Date25 Apr 2022
Tender Amount₹ 2,30,39,000
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CERWI_76867_2Bid Award Id
ViewTender No
CCERWCSBD Online-02/2022-23Tender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ground Floor
1153
-
409.23
Providing filling foundation and plinth with sandy soil well watered and rammed within 5 km initial lead including rough dressing and levelling the bed including cost of all materials, labour, sundries, T&P ,all taxes, royalties, loading and unloading etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
Ground Floor
87
-
231.74
Providing and laying plain cement concrete 1:3:6 Nominal grade mix using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 40 mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification,
-
-
-
Ground Floor
145
-
4859.13
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
-
-
-
Ground Floor
63
-
626
Providing and laying plain cement concrete 1:2:4 Nominal grade mix using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 12mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
Ground Floor
5
-
6275.24
Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:4) in Superstructure including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
Ground Floor
6
-
4440.52
First Floor
7
-
4670.86
Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
Foundation & Plinth
-
-
-
Ground Floor
39
-
4178.04
Superstructure
-
-
-
Ground Floor
159
-
4211.37
First Floor
134
-
4441.71
Second Floor
37
-
4706.6
Providing, lifting, hoisting and laying RCC of M25 grade design mix using portland slag cement as per IS:455 as per the drawing with 20mm aggregate (downgraded conforming to IS: 383) of hard crusher broken granite aggregate of approved quality from approved quarry including weigh batching, mixing in approved mechanical concrete mixers and compacting to proper shape and size level and plumbs and finishing the exposed surface smooth, scaffolding watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P etc. including cost of material and labour and centering, shuttering etc complete including providing strong rigid and levelled Steel centering and shuttering to required shape and size for all kinds of RCC works mentioned in different items with approved centering and shuttering materials with all necessary bracing ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets electrical conduct pipe, PH pipes fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing after the required time from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc complete as per direction of the Engineer-in-charge as per approved specification For finished item of the works excluding reinforcement..
-
-
-
Ground Floor
-
-
-
Foundation
449
-
5921.96
Columns Upto Roof Level
38
-
12992.52
Lintel
3
-
9303.88
RCC Plinth Beam
34
-
5744.88
RCC Roof Beam
34
-
12992.52
RCC Roof Slab
69
-
9952.74
RCC Stair Case
6
-
10999.2
RCC Chajja and Canopy
21
-
886.95
R.C.C. Shelves
5
-
886.95
First Floor
-
-
-
Columns Upto Roof Level
27
-
13224.37
Lintel
2
-
9440.74
RCC Roof Beam
29
-
13224.37
RCC Roof Slab,
55
-
10112.87
RCC Stair Case
6
-
11192.28
RCC Chajja
23
-
978.97
R.C.C. Shelves
5
-
978.97
Second Floor
-
-
-
Columns Upto Mumty Level
10
-
13456.22
Lintel
1
-
9590.15
RCC Roof Beam
10
-
13456.22
RCC Roof Slab,
21
-
10283.93
RCC Chajja
2
-
1071.04
R.C.C. Shelves
5
-
1071.04
Supplying reinforcement of required diameter and approved quality for the RCC items with reinforcement for concrete work shall be Fe 500 conforming to IS 1786 and strictly to the latest Indian Standards including straightening, cutting to sizes, bending and binding the grills, lifting and placing in position as per design complete including cost of bars, binding wires for binding reinforcement which shall be soft & of annealed mild steel of 16 SWG and shall conform to IS 280: all labour, sundries, T&P and scaffolding (linear measurement of reinforcement only will be taken and quantity will be calculated on standard weight) for all heights etc complete as per direction of the Engineer-in-charge as per approved specification
-
-
-
A)Ground Floor
531
-
9403.33
B)First Floor
161
-
9426.97
C) Second Floor
57
-
9451.8
Fixing Kota tiles in floors on 25 mm thick bed of cement mortar 1:1 jointed with neat white cement slurry mixed with pigment to match the shades of the tiles including rubbing polishing ,cost of tiles as per director of Engineer-in-charge.
-
-
-
A)Ground Floor
560
-
1083.48
B)First Floor
466
-
1098.19
C) Second Floor
5
-
1102.06
Fixing Kota tiles in skirting on 25 mm thick bed of cement mortar 1:1 jointed with neat white cement slurry mixed with pigment to match the shades of the tiles including rubbing polishing ,cost of tiles as per director of Engineer-in-charge.
-
-
-
A)Ground Floor
68
-
1174.4
B)First Floor
54
-
1191.97
C) Second Floor
5
-
1197.8
Fixing Ceramic tiles in Wall & dadoo on 12mm thick Cement Plaster in Cement mortar (1:3) jointed with neat cement Slurry mixed with Pigments including cost of Tiles, labour, T&P etc as per director of Engineer-in-charge.
-
-
-
A) Ground Floor
131
-
1117.71
B) First Floor
118
-
1134.71
C) Second Floor
10
-
1140.54
Fixing Ceramic tiles in floors of size (300 x 300)mm on 25 mm thick bed of cement mortar 1:1 jointed with neat white cement slurry mixed with pigment to match the shades of the tiles including rubbing polishing ,cost of tiles as per director of Engineer-in-charge.
-
-
-
A)Ground Floor
43
-
1026.79
B)First Floor
45
-
1045.15
C) Second Floor
5
-
1063.61
Providing 12mm thick cement plaster with cement mortar (1:6) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
781
-
140.28
B)First Floor
654
-
145.05
C) Second Floor
68
-
150.07
16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
458
-
199.73
B)First Floor
327
-
203.98
C) Second Floor
87
-
208.36
Providing 6mm thick cement plaster with cement mortar (1:4) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
844
-
156.8
B)First Floor
785
-
160.14
C) Second Floor
53
-
163.58
Providing 20mm thick Grading plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over roof slab including cost of all materials, conveyance, taxes and royalties, scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A) Ground Floor
340
-
228.83
B)First Floor
343
-
233.08
C) Second Floor
155
-
237.46
Finishing walls with Water proofing Cement Paint of approved shed to Exterior walls including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
340
-
32.74
B)First Floor
343
-
33.77
C) Second Floor
155
-
34.8
Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying distemper including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
2292
-
59
B)First Floor
1991
-
60.27
C) Second Floor
363
-
61.54
Distempering two coats to inside walls with approved make distemper of approved shed on new work to give an even shed including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
A)Ground Floor
1952
-
63.89
B)First Floor
1648
-
65.22
C) Second Floor
208
-
66.54
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) Casement Window with top fixed- 60-. Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5mm for outer frames . 75 mm x 60 mm x 2.25 mm for casement Door Sash profile and 74 mm x 60 mm x 2.5 mm mullion profile Capable of mounting single glazing system , structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminimum 1 No, per set of sashes and the system is to be installed at the site using anchor fasteners , silicon rubber sealant , easy glazing/deglazing at site etc, including cost and conveyance of all materials , accessories, labour charges, materials and product conforming to ASDM.D 638-14, EN 477-95
-
-
-
All Floors
33
-
7586
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) Three Track - Three Panel Sliding Window Casement Window with top fixed- 60-. Series duly manufactured using UPVC reinforced profiles of 108 mm x 45 mm x 2.5mm for outer frames and window sash of 39 mm x 58 mm x 2.25 mm Capable of mounting single glazing system , structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners , silicon rubber sealant , easy glazing/deglazing at site etc, including cost and conveyance of all materials , accessories, labour charges, materials and product conforming to ASDM D 638-14, EN 477-95
-
-
-
All Floors
26
-
5984
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) Ventilator / Top Hung Casement Window with top fixed- 60-. Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5mm for outer frames and window sash of 75 mm x 60 mm x 2.25 mm for casement window Sash profile Capable of mounting single glazing system , structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminimum 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners , silicon rubber sealant ,easy glazing/deglazing at site etc, including cost and conveyance of all materials , accessories, labour charges, materials and product conforming to ASDM D 638-14, EN 477-95
-
-
-
All Floors
11
-
7115
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) Casement Door - 60-. Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5mm for outer frames . 102 mm x 60 mm x 2.25 mm for casement Door Sash profile and 74 mm x 60 mm x 2.5 mm mullion profile Capable of mounting single glazing system , structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12 mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminimum 1 No, per set of sashes ans the system is to be installed at the site using anchor fasteners , silicon rubber sealant , easy glazing/deglazing at site etc, including cost and conveyance of all materials , accessories, labour charges, materials and product conforming to ASDM D 638-14, EN 477-95
-
-
-
All Floors
41
-
8963
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
-
-
-
Ground Floor
5
-
7551
Supplying, fitting and fixing approved of doors shutters of M.S door including cost of materials etc. and as per the direction of the Engineer-in-charge.
-
-
-
All Floors
1202
-
75
Painting two coats with approved paint on new Iron work over coat of primer etc. Enalmel paint including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.
-
-
-
All Floors
38
-
192.47
Supplying ,fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless squre pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification buffing,polishing etc. with cost, conveyence, taxes of all materials, labour, T&P etc. required for the complete as per direction of Engineer- in- charge.
-
-
-
G.F & F.F & SF
29
-
3499.54
Supplying, fitting and fixing of M.S. grill with cost, conveyance of all materials, labour, T&P etc. required for the complete in all respect.
432
-
59.64
ELECTRICAL WORKS
-
-
-
Point wiring in PVC conduit, with piano type switch :-
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
OSR(1.2.1-1.24.2) Group A
91
-
297.38
OSR(1.2.1-1.24.2)-Group B
10
-
522.27
OSR(1.2.1-1.24.2)-Group C
10
-
804.13
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
OSR(1.17.1)-Group A
65
-
227.77
OSR(1.17.2)-Group B
10
-
258.2
OSR(1.17.3)-Group C
10
-
288.63
Circuit / Sub main wiring in PVC conduit :-
-
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.
-
-
-
OSR (1.81)-2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.
480
-
126.07
OSR(1.8.2)-2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire.
410
-
140.03
OSR(1.8.4)-2 x 6 sq.mm. + 1 x 2.5 sq.mm. Earth wire
10
-
188.49
OSR(1.8.5)-2 x 10 sq.mm. + 1 x 4 sq.mm. Earth wire
30
-
249.75
OSR(1.8.11)-4 x 10 sq.mm. + 2 x 4 sq.mm. Earth wire
30
-
413.16
S/F light plug point piano type accesOSRies :-
-
-
-
Wiring to 5 A Plug Point ( 2x1.5 + 1x1.5 )
-
-
-
Short Point
-
-
-
Medium Point
30
-
202.6
Long Point
5
-
202.6
S/F of MS Box 150 x 75 x 60
35
-
125.54
Twin Control Point wiring in PVC conduit, with piano type switch :-
-
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, 2 way piano type switch, phenolic laminated sheet, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
6
-
870.54
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-
-
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
75
-
178.57
S/F power plug point piano type accesOSRies :-
-
-
-
Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
5
-
273.69
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth metal enclosed plug top along with 20 amps. "C" curve, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.
1
-
1100
Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
38
-
282.23
S/F modular type blanking plate :-
-
-
-
Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
28.57
SUB HEAD-II , DISTRIBUTION BOARDS & MCB's(DSR-2018)
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way , Double door
1
-
1621.24
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, nclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used
where 3 phase outlets are required.)
-
-
-
12 way (4 + 36), Double door
1
-
8775
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps.
7
-
1870.54
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `B' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
single pole
65
-
130.16
Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
7
-
7.14
Supplying and fixing following way, horizontal type TP&N, sheet steel MCB distribution board, 415 V on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).
-
-
-
12 way (4 + 36), Double door
2
-
10334
Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts, MCB "C" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25/40 amps FP MCB
6
-
2685
32 amps DP MCB
9
-
849
100 amps FP MCCB, 25ka.
1
-
8891
SUB HEAD-III , TELEPHONE, TELEVISION & DATA SYSTEM( DSR-2018 )
-
-
-
S/F MODULAR BOXES, BASE & COVER PLATE :-
-
-
-
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required
-
-
-
1 or 2 Module (75 mm x 75 mm)
2
-
216.96
Supply and fixing of following sizes of medium class PVC conduit along with accesOSRies in surface/recess including cutting the wall and making good the same in case of recessed conduit as required :
-
-
-
25 mm.
30
-
80.36
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
35
-
43.75
SUB HEAD-IV , EARTHING SYSTEM( DSR-2018 )
-
-
-
Earthing with Copper earth plate 600mm x 600 mm x 3.15mm thick including accesOSRies and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/ coke and salt as required.
2
-
5596.28
Supplying and laying 25 mm x 5 mm. Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
30
-
482.83
Providing and fixing 8 SWG dia Copper wire on surface or in recess for loop earthing as required.
35
-
92.79
SUB HEAD-V , LIGHTNING CONDUCTOR( DSR-2018 )
-
-
-
Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accesOSRies and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/ coke and salt as required.
4
-
5550
Providing and fixing of lighting conductor finial, made of 25 mm dia. 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
7
-
400
Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required ( For horizontal run )
150
-
92.86
Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required ( For vertical run )
70
-
145.54
Providing and fixing testing joint, made of 20mm. x 3mm. thick G.I. strip, 125mm. long, with 4 nos of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.
7
-
91.07
Providing & laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required.
21
-
157.14
SUB HEAD-VI , MISCELLANEOUS( DSR-2018 )
-
-
-
Providing and fixing M.V. danger notice plate of 200mmx150mm made of mild steel, atleast 2mm thick and vitreous enamelled white on both sides and with inscription single red colour on FRLSont side as required.
5
-
201.79
Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required.
2
-
120
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1cement : 2 fine sand ) including trenching (75 cm deep) and refilling etc as required.
-
-
-
150 mm. dia.
50
-
533.93
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for
ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5
mm thick M.S. sheet with its top surface hacked for proper bonding,
top lid shall be screwed into the cast iron/ M.S. sheet box by means of
3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
38
-
153.79
SUB HEAD-VII , INTERNAL LIGHTING FIXTURES & FANS SUPPLY OF LIGHTING FIXTURES ( OSR 2021-22 )
-
-
-
Supply of 18/25W WALL MOUNTED LED with all accesOSRies as per standard item.. ( Crompton, Philips, Polycab, Havells )
4
-
683
Supply of 25/20W SURFACE MOUNTED LED with all accesOSRies as per standard item..( Crompton, Philips, Polycab, Havells )
76
-
683
Supply of 20/18W SURFACE MOUNTED LED with all accesOSRies as per standard item..( Crompton, Philips, Polycab, Havells )
27
-
683
Supply of 45W LED Street Tube with all accesOSRies as per standard item.. ( Crompton, Philips, Polycab, Havells )
7
-
5706
ERECTION OF LIGHTING FIXTURES AND FANS DSR 2018
-
-
-
Installation, testing and commissioning of pre-wired, flourescent fitting / compact fluorescent fitting of all types, complete with all accesOSRies and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
137
-
150
Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
38
-
181.25
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
-
-
-
Upto 450 mm sweep
5
-
324.11
Supply of 15W SURFACE MOUNTED LED with all accesOSRies as per standard item..( Crompton, Philips, Polycab, Havells ) NON DSR
34
-
1829
SUPPLY OF CEILING & EXHAUST FANS
-
-
-
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI with 5 star marked & energy efficient complete as required. (Such as Havells Velocity HS, Anchor, Usha, Crompton or Equivalent).
-
-
-
1200 mm sweep
38
-
1947
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting FRLSame and other accesOSRies etc. Complete as required (Such as Ventil Air - DX White, Usha, Almonard, Polycab, Crompton or Equivalent).
-
-
-
300 mm sweep 900 rpm
5
-
1710
Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.
8
-
10042
Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications.
8
-
5814
P.H. Works
-
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
8.66
EXTERNAL S/D & CIVIL (OSR)
-
-
-
Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.
5
-
19245
Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of EIC.
-
-
-
a)Initial lift up to 1.50m
-
-
-
S. Tank :-1 x 6.06 m x 3.46 m x 1.50 m=31.45cum
31.45
-
204.22
(b).From 1.50m to 3.00m depth
-
-
-
1no x 6.06 m x 3.46 m x 1.50 m=31.45 cum
31.45
-
219.22
Supplying all materials, labour, T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc .all complete as per direction of Engineer in charge.
-
-
-
Ground Floor-
-
-
-
S.tank:-1no x 6.06 m x 3.46 m x 0.15 m=3.14 cum
3.15
-
403.4
Supplying all materials, labour, T&P and providing c.c(1:3:6) using 4cm h.g metal including water ing ,cu ring, conveyance of all materials to worksite payment of royalty .taxes etc. all complete as per specification and direction of Engineer in charge.
-
-
-
S.tank:-1 x 6.06 m x 3.46 m x 0.10 =2.09cum
2.3
-
3873.1
S.tank:-1 x 3.55 m x 2.55 m x 0.10 m =0.905 cum
-
-
-
B.P.Chamber:-
-
-
-
1 x 2nos x(1.66+0.77m x 0.38mx0.10m=0.185cum
-
-
-
Supplying all materials, labour, T&P and providing C.C(1:1.5:3) using 12mm h.g chips including watering. curing, conveyance of all materials to worksite payment of royalty. taxes etxxall complete as per specification and direction of E.I.C.
-
-
-
1 x 6.06 m x 3.46 m x 0.20 m = 4.19 Cum, 1 x 4.00 m x 1.40 m x 0.038 m = 0.425 Cum
10.76
-
6334.5
Supplying all materials, labour. T&P and providing brick work with K.B bricks having c. s not less than 75kg/cm2 with dimensional tolerance +/-8% including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of Engineer in charge.
-
-
-
In F&P in c.m(1:6)
-
-
-
B.W.Protection chamber-
-
-
-
1 x (1.40+ 0.90)x 0.25m x 0.90m=0.5175 cum Vent Post;-1no X0.45mX0.45mx0.60m=0.121cum
2.43
-
4132.9
In F&P in c.m(1:3)
-
-
-
S.Tank:-
-
-
-
1 x 2 x ( 5.76 + 1.40 ) m x 0.88 m x 0.50 m = 6.3 cum 1 x 2 x ( 5.50 + 1.40 ) m x 0.75 m x 0.50 m = 5.18 cum 1 x 2 x ( 5.26 + 1.40 ) m x 0.63 m x 0.50 m = 4.19 cum 1 x 2 x ( 5.00 + 1.40 ) m x 0.50 m x 0.50 m = 3.20cum 1 x 2 x ( 4.76 + 1.40 ) m x 0.38 m x 1.00 m = 4.68cum 1 x ( 3.25 + 1.50 ) m x 0.375 m x 1.00 m= 1.781 cum 1 x ( 3.00 + 1.50 ) m x 0.25 m x 1.00 m = 1.125 cum
52.9
-
4513.5
Supplying all materials,1abour,T&P and providing rigid & smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty .taxes etc.all complete as per specification and direction of E.I.C.
-
-
-
1 x2 x ( 4.76 + 2.16 ) m x 0.15 m = 2.075 sqm 1 x 4.00 m x 1.40 m = 5.6 sqm
15.35
-
435.6
Supplying all materials, labour,T&P and providing M.S reinforcement for R.C.C works including cutting ,bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification and direction of E.I.C.
3.55
-
8903.5
Supplying all materials, labour,T&P and providing c.c(1:1.5:3) using 12mm h.g chips for R.C.C works including oisting,laying,watering,curing,conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification and direction of E.l,C.
-
-
-
(a) R.c.c (1:1/5:3)
-
-
-
W.H.B.Slab:-
-
-
-
2nox(1.35+1.35m)x0.60mx 0.08m = 0.259cum
-
-
-
B.W.Protection chamber-
-
-
-
2no x 1.40m x 1.40m x 0.08m = 0.352cum
-
-
-
Septik Tank :-
-
-
-
2 x 4.76 m x 2.16 m x 0.15 m =3.084 Cum
-
-
-
(-) 1 no x 0.50m x 0.50m x 0.15m = 0.031cum
-
-
-
3.65 Cum
3.65
-
6334.5
Supplying all materials, labour,T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per pecification and direction of E.I.C.
-
-
-
20mm thick C.P.(1:3)
-
-
-
2 x 2 x ( 4.00 + 1.40 ) m x 3.00 m =64.80sqm + 2x 4.00 x 1.40 m = 11.20 sqm =76.00 Sqm
76
-
236.8
12 mm thick C.P in C:M (1:3)
-
-
-
2x 2 x ( 4.76 + 2.16 ) m x 0.30 m =8.304 sqm + 3x4x0.50x0.50m= 1.00 Sqm
9.3
-
156.7
Supplying all materials, labour,T&P and providing cement punning including watering, curing. conveyance of all materials to worksite, payment of royalty. taxes etc.all complete as per specification ion and direction of Engineer in charge.
95.75
-
21
Supplying all labour, materials T&P and fixing of 2" R.C.C.Baffle wall precast with C.C.(1;1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.M. Specification and direction of E.I.C
-
-
-
3x 1.80 m x 0.45 m = 2.43 sqm
2.43
-
849
Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
20
-
256.6
Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all "materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.
-
-
-
16OmmXI 60mm X160mm PVC Tee/Y
3
-
568.2
Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C
5
-
303.8
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing, conveyance of all mat erials to worksite, payment of royalty.taxes etc. all complete as per specification and direction of E.I.C.
-
-
-
2 x 2 x ( 5.76 + 3.16 ) m x 0.50 m = 17.84 Sqm
-
-
-
2x 2 x ( 5.50 + 2.90 ) m x 0.50 m = 16.80 Sqm
-
-
-
2x 2 x ( 5.26 + 2.66 ) m x 0.50 m =15.84 Sqm
-
-
-
2 x 2 x ( 5.00 + 2.40 ) m x 0.50 m =14.80Sqm
-
-
-
2x 2 x ( 4.76 + 2.16 ) m x 0.70 m =19.38 Sqm
-
-
-
2 x 2 x ( 5.76 + 2.90 ) m x 0.13 m =4.50 Sqm
-
-
-
2 x 2 x ( 5.50 + 2.66 ) m x 0.12 m =3.90 Sqm
-
-
-
2x 2 x ( 5.26 + 2.40 ) m x 0.13 m =2.98 Sqm
-
-
-
2 x 2 x ( 5.00 + 2.16 ) m x 0.12 m =3.42 Sqm
-
-
-
2 x (3.25+2.25)m x 1.00 m = 11.00 Sqm
-
-
-
2 x (3.00+2.00)m x 1.00 m = 10.00 Sqm
-
-
-
2 x (3.25+2.00)m x 0.125 m = 1.312 Sqm
-
-
-
Total =121.77 Sqm
121.77
-
140.6
Filling in F&P with excavated materials, including watering and ramming as per direction of Engineer in charge.
50.44
-
114.59
Supplying all materials, labour,T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in c.c (1:1.5:3) using 12mm size h.g chips/foundation concrete (1:3:6) using 40mm size h.g metal on bed and arround trap,K.B brickwork in c.m(1:6) in F&P and inside 12mm thick c.p(1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
(a).Inside size 250mmx250mm
5
-
1493.6
Supplying all materials,labour,T&P and costructing Inspection chamber of the following sizes with c.c(1:3:6) using 40mm size h.g metal on ed,1st class K.B.brickwork in c.m(1:6),moulding and shaping the channel inside and benching with c.c(1:1.5:3) using 12mm size hg chips, 12mm thick c.p(1:3) with punning to inside,cement flush pointing (1:3) to outside,R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips with R.C.C m.h cover.e.w in excavation in all kinds of soil and refilling the cavity arround the chamber including watering,curing,conveyance of all materials to site payment of royalty.taxes etc.all complete as per approved specification and direction of the E.I.C.
-
-
-
Inside size 760mmx760mmx460mm
5
-
8352.6
Addle.depth
2
-
901.8
Supplying all materials,labour,T&P and costructing man hole chamber of the following sizes with c.c(1:4:8) using 40mm size h.g metal onbed,Ist class K.B.brickwork in c.m(1:6),moulding and shaping the channel inside and benchingwith c.c(1:2:4) using 12mm size h.g chips,12mmthick c.p(1:3) with punning to inside,cement flush pointing (1:3) to outside,R.C.C cover slabin c.c(1:2:4)using12mmsizeh.gchipswithR.C.Cm.hcover,e.winexcavationinallkindsofsoilandrefillingthecavityarroundthechamberincludingwatering,curing,conveyanceof all mate- rials to site payment of royalty,taxes etc.all com-plete asper approved specification and direction of the E.I.C.
-
-
-
Inside size 900mmx900mmx900mm
2
-
14991.4
Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with pre cast R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works.watering.curing,conveyance of all materials to worksite, payment of royalty .taxes etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
1.22m dia.x 2.10m deep
1
-
5460.9
Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class K.B brickwork in c.m(1:6) for the remaining height attop,12mmthickc.p(1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works.watering.curing,conveyance of all materials to worksite, payment of royalty .taxes etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
1.20m dia.x 2.00m deep
2
-
15387.9
Supplying all labour.materials T&P and laying of U-PVC soil waste pipe of the following internal diametre confirming to I.S.in trenches of the depth upto 1,2mtr including jointing with supply of approved rubber, lubricant by non - heat application method on beding with 150mm thick C.C.(1:3:6) using h.g. metal of 25mm to 40mm and then making allround encasing including earth work excavation in all kinds of soil , refilling the trenches , watering, curring, conveyance of all materials to site , payment of royality , taxes etc. and testing all complete as per P.H. Specification and direction of Engineer in charge.
-
-
-
100mm dia.with haunch top encasing.
35
-
848.4
Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.
-
-
-
160 mm dia PVC Pipe all round
30
-
1649
Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.
-
-
-
160 mm dia PVC gallary
5
-
1211.3
A). INTERNAL W/S.
-
-
-
Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall.ceiling and floor testing all complete as per specification and direction of E.I.C.
-
-
-
15mm dia C-P.V.C. pipe
14
-
131.9
20mm dia C-P.V.C. pipe
12
-
150
25mm dia C-P.V.C. pipe
100
-
194.2
32mm dia C-P.V.C. pipe
20
-
239.5
Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
-
-
-
250mm thick brick walls (G.F)
24
-
48.5
Supplying all materials,labourT&P and cutting holes through r.c.c walls,floors,roofs for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
4
-
190.8
Supplying all materials,labour,T&P and cutting pucca floors and walls for taking G.I./ P.V.C pipes and making good the damages as per direction of the E.I.C.
-
-
-
brick walls (G.F)
40
-
164.9
Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.
-
-
-
15mm dia. C.P Bibcock (Short body)
14
-
871.8
15mm dia. C.P Bibcock (long body)
6
-
987.9
15mm dia.C.P concealed stopcock
2
-
1032.3
15mm dia.C.P angle stopcock
32
-
858.1
15mm dia C.P pillarcock
11
-
829.5
25mm dia. PVC ball valve
2
-
915
25mm dia. PVC ball cock
3
-
550
32mm dia. PVC ball valve
2
-
1382.4
15mm dia C.P flange
51
-
40
15mm dia C.P Extension piece.
51
-
236.5
15mm dia. P.V.C Bib cock
2
-
236.5
15mm CP 2in1 Bib cock
14
-
999.5
B). INTERNAL S/I
-
-
-
Supplying all materials,labour,T&P and fitting & fixing U-PVC SWR soil waste ventilating pipes and fittings of the following O.D conforming tc ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufact urer's specification,testing,e.w in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C
-
-
-
(a) 110mm dia pipe
220
-
213.3
(b) 75mm dia pipe
5
-
127
(c) 110mm dia P trap
21
-
271
(d) 110mm dia door Tee
24
-
241.7
(e) 110mm dia Door Cross Tee
8
-
292.9
(f) 110mm dia Plain Tee
27
-
241.7
(g) 110mm dia. Door bend
12
-
121.2
(h) 110mmdia. Plain/Shoe bend
24
-
75.8
(i) 110 mm dia. Cowl
2
-
35.4
(j) 125mm dia. C.P. Grating
21
-
80.1
(k) 110mm dia. Offset.
12
-
157
Supplying all materials,labourJ&P and cutting holes through brick/stone masonary walls for taking H.C.I/PVC pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
-
-
-
(a) 250mm to 375mm thick wall
24
-
219.2
Supplying all materials,labourT&P and cutting holes through r.c.c walls,floors,roofs for taking H.C.I/PVC pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge.
12
-
154
Supplying all materials,labour,T&P and fixing water closet.squatting pan (Indian type W.C pan/ Orissa pattern squating pan) duly embeded in c.c(1:5:10) using 4cm h.g metal all complete as per direction of E.I.C.
-
-
-
E.W.C P/S-trap with seat cover
14
-
2843.8
Providing and fixing Urinal spreader complete as per direction of E.I.C.
-
-
-
Supplying all materials,labour,T&P and fitting&fixing 10litres capacity low level flushin cisternwith a pair of cast iron or m.s brackets completewith fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float,c.p brass handle,unions and couplings for connection with inlet,outlet and overflow pipes,32mm dia.c.p flush bend,15mmdia.pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closetand connecting inlet pipe with supply mainetc.all complete as per specification and directionof E.I.C.
14
-
1470.3
Supplying all materials,labour,T&P and fixing wash basins with pedestal with hole for pillar taps with C.I/M.S brackets painted white with 40 mm CP waste,40 mm PVC pipe ,waste pipe including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.
-
-
-
550mmx400mm W.H.B
11
-
4412.3
supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick F A.C sheet or plywood sheet and fixed to wooden plugs with Cpscrews and washers complete as per P.H specification and direction of Engineer in charge
-
-
-
600mmx400mm B.E Mirror (fixed type)
11
-
761.8
Supplying all materials,labour.T&P and fixing standard size C.P towel ring, rails coat hooks complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
-
-
-
CP towel ring
4
-
813.3
Supplying all materials,labour,T&P and fixing standard size C.P soap holder complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
7
-
382.9
Supplying all materials,labour,T&P and fixing wash kitchen sink with C.I/M.S brackets painted white with 40 mm CP waste,40 mm PVC waste pipe including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.
1
-
5286.4
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.
1
-
5286.4
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.
-
-
-
Porcelain -Flat back standing urinal 430x260x350mm size
-
-
-
Supplying all materials, labour, T&P and fixing C.P/Brass waste of the following nominal diameter for wash hand basin complete etc all complete as per specification and direction of the E.I.C.
-
-
-
40 mm dia C.P/Brass waste
11
-
119.3
Supplying all materials,labour, T&P and fixing standard sized CP Toilet Paper holder complete with fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
14
-
284.4
SUB HEAD (I) :- SANITARY FIXTURES (DSR ITEMS)
-
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
11
-
791.3
SUB HEAD (I) :- SANITARY FIXTURES (NON DSR ITEMS)
-
-
-
Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.
14
-
1224
Providing and Fixing stainless steel Horizontal / Vertical grab bar 600mm length fixed to PVC cleats with C.P. brass screws wherever required with approved make & quality and as per the directions and to the satisfaction of Engineer-in-charge.
1
-
3840
SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS (NON DSR)
-
-
-
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 8 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.
-
-
-
32 mm dia.
12
-
115
50 mm dia.
12
-
195
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
5
-
238.04
SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (DSR)
-
-
-
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
45 cm length
-
-
-
15 mm nominal bore
25
-
76.07
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
1528.71
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1 CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.
-
-
-
Internal work - Exposed on wall
-
-
-
32mm nominal outer dia pipes
19
-
447.28
40mm nominal outer dia pipes
12
-
602.1
50mm nominal outer dia pipes
2
-
827.68
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
1
-
675.98
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
32 mm nominal bore
1
-
526.7
40 mm nominal bore
4
-
631.52
50 mm nominal dia
2
-
784.15
Constructing brick masonry road gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
5
-
5589.45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements