Pradhan Mantri Gram Sadak Yojana Tender

Road-A

Providing and Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous including cost of all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Road-A

Providing and applying tack coat with bitumen on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Road-A

Providing and laying Semi Dense Bituminous Concrete with 100 - 120 TPH batch type HMP producing an average out put of 75 Ton per hour using crushed aggregates of specified grading ,premixed with bituminous binder @ 4.50 to 5.00 percent of mix and filter ,transporting the hot mix to work site ,laying with hydraulic paver finisher , with sensor control to the required grade and alignment , Rolling with smooth wheel ,vibratory and tandom rollers to achieve the desired compaction as per the MOrth Specification and direction of Engineer-in-charge.

Road-A

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MORD techincal specification Clause 1915 with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge.

Road-A

Maintenace of road signs by way of cleaning and repainting of mandatory / requlatory / cutionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910.

Road-A

Maintenance of 200 mtr, km stone & 5 th km stones by way of refiting of tited stones repairing with cement mortar, claning repairing and lettering on 200 mtrs km stone and 5 th km stone as per drawing and techincal specification Clause 1912.

Road-A

Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 of MORD and as per direction of the Engineer in charge.

Road-A

Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67-2012 made of Class-B retro-reflective sheeting of high intensity and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 6.7 of IRC 67-2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00 mm thick as per Clause 6.5.2 of IRC : 67-2012 or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides supported on mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of M.S.angle of size 50mm x 50mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x75 cm, 60 cm belowground level as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T & P, excavation, curing etc. complete, under supervision of Engineer-in-Charge.(1800mmx1200mm Rectangle)

Asset Board (single side)

Road-A

Providing and fixing of retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67-2012 made of Class-B retro-reflective sheeting of high intensity and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 6.7 of IRC 67-2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00 mm thick as per Clause 6.5.2 of IRC : 67-2012 or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4 mm and aluminum thickness of 0.5mm on both sides supported on mild steel angle post 75mm x 75mm x 6mm and periphery supporting member of M.S.angle of 50mm x 50mm x 6mm size firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 75 cm, 60 cm below ground level as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T & P, excavation, curing etc. complete, under supervision of Engineer-in-Charge.

900 mm equilateral Triangle (Turning Board)

Road-A