Rural Development Department Tender

Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.

Rural Development Department - RDD Tender

Civil And Construction
Building Construction
Eprocure
Opening Date28 Jun 2023
Closing Date5 Jul 2023
Tender Amount₹ 7,38,74,481 
Notes
Download

Costs

Summary

Mph-od-dkl-01

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).

530.3

624746

1178.1

... More
Carriage of excavated earth by mechanical means within 5 KM lead

371.9

103685

278.8

... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.

93.63

533765

5700.8

... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

-

-

-

... More
foundation

57.6

382752

6645

... More
RCC in Plinth beam

32.56

243040

7464.4

... More
up toplinth

10.8

155403

14389.2

... More
SUPER STRUCTURE

-

-

-

... More
RCC in column

-

-

-

... More
Ground floor

28.08

404048

14389.2

... More
First floor

28.08

452082

16099.8

... More
Terrace Floor

6.08

110339

18148

... More
RCC in Roof beam

-

-

-

... More
Ground floor

28.17

405343

14389.2

... More
First floor

28.17

453531

16099.8

... More
Terrace Floor

7.21

130847

18148

... More
slab

-

-

-

... More
Ground floor

46.73

608443

13020.4

... More
First floor

48.89

706812

14457.2

... More
Terrace Floor

11.78

190563

16176.9

... More
RCC in S.case

-

-

-

... More
Ground floor

18.1

259586

14341.8

... More
First floor

12.25

196525

16042.9

... More
RCC in Lintel

-

-

-

... More
Ground floor

2.06

28170

13675.2

... More
First floor

1.57

23931

15243.1

... More
Terrace Floor

0.2

3424

17120

... More
RCC in Sill

-

-

-

... More
Ground floor

0.65

8888

13675.2

... More
First floor

0.87

13261

15243.1

... More
RCC chajja

-

-

-

... More
Ground floor

16.35

17687

1081.8

... More
First floor

12.75

15583

1222.2

... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550

-

-

-

... More
Foundation

131.3

1164570

8869.54

... More
SUPER STRUCTURE

-

-

-

... More
ground floor

170.35

1510926

8869.54

... More
First floor

164.24

1460947

8895.2

... More
Second floor / Terrace Floor

34.3

306028

8922.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in Foudation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

74.97

381829

5093.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

196.05

1006010

5131.4

... More
First floor

131.3

711527

5419.1

... More
Terrace Floor

51.07

293647

5749.9

... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)

-

-

-

... More
ground floor

1151.03

185085

160.8

... More
First floor

560.18

93438

166.8

... More
Terrace floor

197.29

34131

173

... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)

-

-

-

... More
Ground floor

668.76

152076

227.4

... More
First floor

304.96

70964

232.7

... More
Terrace floor

76.53

18229

238.2

... More
Priming one coat with water bound wall cement primer. (Outside)

-

-

-

... More
Ground floor

1151.03

78154

67.9

... More
First floor

560.18

39548

70.6

... More
Terrace Floor

197.29

14461

73.3

... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
Ground Floor

780

54678

70.1

... More
First floor

625.1

43819

70.1

... More
Terrace floor

140.49

9848

70.1

... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

588.8

94679

160.8

... More
First floor

433.9

71202

164.1

... More
Second Floor

140.49

23532

167.5

... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

-

-

-

... More
Ground floor

1151.03

175992

152.9

... More
First floor

560.18

88732

158.4

... More
Terrace floor

197.29

32375

164.1

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground Floor

186.66

214061

1146.8

... More
First floor

186.66

216021

1157.3

... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground floor

13.54

16912

1249.1

... More
First floor

13.54

17126

1264.9

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent.(ground Floor

46.26

85201

1841.8

... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
ground Floor

25.46

46892

1841.8

... More
First Floor

25.46

47159

1852.3

... More
Terrace floor

3.54

6596

1863.4

... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/Kajaria/Rak/Ceramic or equivalent.(ground Floor

29.16

29340

1006.2

... More
Providing, Fitting & Fixing of Vitrified Industrial floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 30cm x 30cm printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent.(ground Floor

63.41

116788

1841.8

... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor

-

-

-

... More
Ground Floor

293.82

107185

364.8

... More
head room

72.08

28803

399.6

... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

4414.08

303776

68.82

... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

-

-

-

... More
ground Floor

123.39

25072

203.2

... More
First floor

88.36

18414

208.4

... More
terrace floor

18.9

4044

214

... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following: 4 nos Hinges on each leaf 1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock 1 Set D-type pull handle back to back on each leaf 1 no Concealed flush bolt in inactive leaf of Double door, if any 1 no vision glass on each leaf Fastners as required. The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.

16.8

134400

8000

... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant makeSeccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.Ground floor and first floor

5.04

24192

4800

... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge.(ground Floor and first floor)

26.36

144980

5500

... More
Providing "RAJSHRI/Armstrong/Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately).(Ground Floor,first&terrace floor)

54.55

39373

721.78

... More
Providing and Fixing WINSPIRE/Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.Ground Floor,first&terrace floor

52.2

287100

5500

... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent

4.2

24360

5800

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

704.44

189564

269.1

... More
Providing and Fixing NCL/Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.(ground Floor.first,terrace floor)

28.8

144000

5000

... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.

-

-

-

... More
Ground Floor

10.89

30049

2759.4

... More
First Floor

9.74

27136

2786.1

... More
WATER PROOFING

-

-

-

... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.

-

-

-

... More
Stage3:Supply and application ofSika Top Seal 107-the cementitious,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied

-

-

-

... More
Few parameters:Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10%

-

-

-

... More
Water Proofing to sunken slab area

25.47

12735

500

... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

-

-

-

... More
ground Floor

62.42

187859

3009.6

... More
First Floor

62.42

189288

3032.5

... More
Terrace Floor

26.24

80199

3056.4

... More
PH Work

-

-

-

... More
Internal PH Work

-

-

-

... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

-

-

-

... More
Ground Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

30

7479

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

40

14176

354.4

... More
In 1st Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

25

6232

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

35

12404

354.4

... More
32mm dia C-PVC pipe (Ashirbad/Supreme)

20

10296

514.8

... More
2nd Floor

-

-

-

... More
40mm dia C-PVC pipe (Ashirbad/Supreme)

117

79899

682.9

... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
250mm thick wall in Ground floor

10

549

54.9

... More
In 1st Floor

10

583

58.3

... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor

5

960

192.1

... More
In 1st Floor

5

1044

208.8

... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

50

9765

195.3

... More
In 1st Floor

40

8248

206.2

... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

-

-

-

... More
250mm to 375mm thick wall in Ground Floor to Ist Floor

25

5050

202

... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

-

-

-

... More
15mm dia CP Long Body Bib cock (Plaza/Amber/Aquatic)

16

11088

693

... More
15mm dia CP angle stop cock (Plaza/Amber/Aquatic)

26

14690

565

... More
20mm dia CP consealed stop cock (Plaza/Amber/Aquatic)

4

4431

1107.8

... More
15mm dia CP two in one bib cock (Plaza/Amber/Aquatic)

12

11504

958.7

... More
15mm dia CP Health faucet (Plaza/Amber/Aquatic)

12

6667

555.6

... More
15mm dia CP extension piece

21

1608

76.6

... More
15mm dia CP Pillar cock (Plaza/Amber/Aquatic)

4

3604

901

... More
25mm dia G.M or Brass F.W valve (Sakti make)

10

9296

929.6

... More
32mm dia G.M or Brass F.W valve (Sakti make)

2

2722

1361

... More
40mm dia G.M or Brass F.W valve (Sakti make)

2

3454

1727.4

... More
125mm dia CP gratings

18

1544

85.8

... More
15mm dia CP revolving shower (Plaza deluxe make)

4

2313

578.4

... More
15mm dia CP Sort Body Bib cock (Plaza/Amber/Aquatic)

2

1809

904.8

... More
15mm dia CP Long neck Pillar cock (Plaza/Amber/Aquatic)

8

9195

1149.4

... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)

6

13731

2288.5

... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
10 litres PVC L.L. Cistern (Slimline-white)

14

26824

1916

... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge

-

-

-

... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

20

4600

230

... More
75mm U-PVC plain bend

6

630

105.1

... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

150

57285

381.9

... More
110mm U-PVC door bend

8

2008

251.1

... More
110mm U-PVC door Tee

15

5304

353.6

... More
110mm U-PVC plain Tee

10

3163

316.3

... More
110mm dia U-PVC offset without ear

10

4777

477.7

... More
110mm U-PVC plain bend

20

3518

175.9

... More
110mm U-PVC vent cowl

12

1018

84.9

... More
110mm dia U-PVC 'P' trap

20

7622

381.1

... More
110mm dia U-PVC socket plain

10

1601

160.1

... More
75mm dia U-PVC socket plain

8

650

81.3

... More
PVC Clamp

30

1284

42.8

... More
110mm U-PVC door cross Tee

2

1102

551.2

... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)

-

-

-

... More
580mm size Orissa pan(Hindware/Parryware/Neycer)

2

7036

3518.3

... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
Flat Back lipped wall urinal [Medium] 380x580x350

6

13959

2326.5

... More
15mm dia Urinal spreder

6

3331

555.3

... More
32mm dia Dome wate

6

771

128.5

... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
E.W.C. with seat cover (Parryware/Hindware/Neycer)

12

44476

3706.4

... More
EWC(Matrix set)No.70002(P-18)

1

66589

66589.4

... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)

4

21876

5469.2

... More
Under Counter basin(560x450)Hindware-No.10095

8

30947

3868.4

... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

-

-

-

... More
600mm x 450mm size B.E mirror

12

9819

818.3

... More
Large size mirror with frame(19x0.60x0.90)

6.12

4880

797.4

... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
450 x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)

4

2438

609.7

... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)

14

9882

705.9

... More
CP towel Ring (Plaza/Amber/Aquatic)

12

5557

463.1

... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
CP soap holder (Plaza/Amber/Aquatic)

18

3290

182.8

... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
600 x 450 x 250mm size S/S kitchen sink (Jayana make )

2

9857

4928.9

... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ist Floor

57.12

9487

166.1

... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge. In Ist Floor

57.12

42128

737.55

... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.

10

2734

273.4

... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor

8.47

5366

633.6

... More
In 1st Floor

7.61

4821

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor

5.65

39630

7014.3

... More
In 1st Floor

5.07

37225

7342.4

... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

-

-

-

... More
Gully Trap chamber

6

12343

2057.2

... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 760mm x 760mm x 460mm

5

47702

9540.5

... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge

27

27850

1031.5

... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge

13.5

35367

2619.8

... More
EXTERNAL PH WORK

-

-

-

... More
Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No.

-

-

-

... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

-

-

-

... More
Drilling of 200mm dia bore 0 to 30 mtr

30

23478

782.6

... More
Drilling of 200mm dia bore 31 to 45 mtr

15

11739

782.6

... More
Drilling of 150mm dia bore 41 to 125 mtr

25

19565

782.6

... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials

-

-

-

... More
Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

30

5415

180.5

... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs

15

2707

180.5

... More
Cost of 200mm dia PVC schedule - 80 pipe

45.5

80789

1775.6

... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

1

6586

6586

... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing

-

-

-

... More
Sanitary sealing upto 5 mtr below ground level

1

1173

1173.1

... More
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

0.2

1402

7014.3

... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
2HP Three Phase 5 stage submersible pump set.

1

16625

16625.6

... More
DOL control panel

1

3805

3805.5

... More
50mm S. S. Nipple, S. S. bolt & clips

2

2000

1000

... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap

1

1200

1200

... More
2.50mm Sqm Submersible flat cable

120

15372

128.1

... More
Steel rope with cover

60

1602

26.7

... More
20mm dia rigid U-PVC pipe

60

414

6.9

... More
40mm dia HDPE pipe

50

8930

178.6

... More
Labour charges for lowering, testing, commissioning & transportation to site etc.

1

2000

2000

... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge

-

-

-

... More
50mm dia PVC ASTM

21

7463

355.4

... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

13.5

3019

223.67

... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 910mm x 910mm x 910mm

4

71719

17929.9

... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
1.40m dia x 2.00m deep soakway pit

1

21887

21887.8

... More
1.20m dia x 2.00m deep soakway pit

2

37232

18616.2

... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
110mm dia u-pvc pipe alround concrete

50

75930

1518.6

... More
160mm dia u-pvc pipe alround concrete

25

60087

2403.5

... More
Construction 1 No 50 users RCC Septic tank

-

-

-

... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-

-

-

... More
1st Depth

34.68

7756

223.67

... More
Addl. Depth of 1.5 m

23.12

5551

240.1

... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

-

-

-

... More
In ground floor

3.47

2198

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

-

-

-

... More
In ground floor

2.31

11869

5138.5

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

-

-

-

... More
In ground floor

1.39

9749

7014.3

... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

22.89

177672

7762

... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
For Roof slab

23.88

16044

671.9

... More
For RCC wall

123

124389

1011.3

... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
In ground floor

22.89

204169

8919.6

... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

90

15264

169.6

... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

2

1077

538.7

... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

10.8

1342

124.3

... More
PVC tank-2000 Ltr capacity

-

-

-

... More
Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 Ltr capacity PVC Tank (Sintex make).

4

101365

25341.4

... More
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Staging for 2000 Ltr capacity PVC Tank .

4

79965

19991.4

... More
CERAMIC FLOOR TILES

-

-

-

... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles. Ground Floor

44.68

53254

1191.9

... More
First Floor

38.92

47276

1214.7

... More
CERAMIC WALL TILES

-

-

-

... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

-

-

-

... More
Ground Floor

118.62

149081

1256.8

... More
First Floor

106.55

137417

1289.7

... More
FRP DOOR SHUTTER

-

-

-

... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor and first floor

33.08

142687

4313.4

... More
FRP DOOR FRAME

-

-

-

... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor

99.75

62463

626.2

... More
Electrical

-

-

-

... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

-

-

-

... More
GROUP-A

60

33600

560

... More
GROUP-B

25

20050

802

... More
GROUP-C

18

19926

1107

... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved with 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

10

5370

537

... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for Office standard.

12

2316

193

... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant make & model ISI marked as approved , complete suitable for Office standard.(Maximum 02 nos point in one circuit).

28

14336

512

... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make A catagory ISI marked as approved,

12

7788

649

... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

2

2778

1389

... More
Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Havells/norpack or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

233

31222

134

... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)

300

44400

148

... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

200

53000

265

... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB) (2X4+1X2.5)

200

33000

165

... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB) (4X4+2X2.5)

75

18600

248

... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)

16

3136

196

... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit. (4X6+2X2.5)

34

9996

294

... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(4X10+2X4)

34

14314

421

... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

4

2488

622

... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

-

-

-

... More
4 moudle(125mmx75mm)

1

270

270

... More
1 moudle(75mmx75mm)

4

892

223

... More
12 moudle(200mmx150mm)

2

970

485

... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved

-

-

-

... More
20 MM

20

2020

101

... More
25 MM

10

1030

103

... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.

8

864

108

... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge

4

2480

620

... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.

2

412

206

... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge ..

12

744

62

... More
Supplying,fixing of Blanking plate(modular type in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar complete suitable for Office.

8

336

42

... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.

4

12488

3122

... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge.

4

14692

3673

... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, .(With fan Regulator)

19

40489

2131

... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved)

4

6088

1522

... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved.).

70

56070

801

... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )

8

5888

736

... More
Supplying, Erection, Fixing, connection & testing of LED Street light with movable braket at building top of Lighting Technology/Philips/Bajaj or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.

4

12812

3203

... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

40

1280

32

... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge.

-

-

-

... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)

4

8692

2173

... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)

2

3276

1638

... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of MakeLEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

670

335

... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

56

7504

134

... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.

2

4500

2250

... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

2

3380

1690

... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

5290

2645

... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years

2

5064

2532

... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

55

5335

97

... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

2

2198

1099

... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.

1

2850

2850

... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
3 core x 2.5 sq mm (for small power,street light)

50

4393

87.87

... More
3.5core x 35 sq mm

40

8736

218.41

... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

40

5920

148

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

-

-

-

... More
3.5 core x35 sq mm

4

1352

338

... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

-

-

-

... More
50 mm dia

2

828

414

... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.

1

86232

86232

... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )

1

12127

12127

... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

1

5089

5089

... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )

4

3600

900

... More
Mahispat

-

-

-

... More
Earth work in excavation IN ALL KINDS OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.

485.07

74652

153.9

... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.1st Extra loft of 1.5m(up to 7.5m)

130.66

22251

170.3

... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

184.72

15793

85.5

... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).

623.89

735004

1178.1

... More
Carriage of excavated earth by mechanical means within 5 KM lead

431.01

120165

278.8

... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.

115.8

660152

5700.8

... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

-

-

-

... More
foundation

82.76

549940

6645

... More
RCC in Plinth beam

40.21

300143

7464.4

... More
up toplinth

18.81

270660

14389.2

... More
SUPER STRUCTURE

-

-

-

... More
RCC in column

-

-

-

... More
Ground floor

48.91

703775

14389.2

... More
First floor

36.04

580236

16099.8

... More
Terrace Floor

9.9

179665

18148

... More
RCC in Roof beam

-

-

-

... More
Ground floor

38.51

554128

14389.2

... More
First floor

34.89

561722

16099.8

... More
Terrace Floor

5.46

99088

18148

... More
slab

-

-

-

... More
Ground floor

80.26

1045017

13020.4

... More
First floor

62.19

899093

14457.2

... More
Terrace Floor

11.78

190563

16176.9

... More
RCC in S.case

-

-

-

... More
Ground floor

17.38

249260

14341.8

... More
First floor

12.18

195402

16042.9

... More
RCC in Lintel

-

-

-

... More
Ground floor

6.94

94905

13675.2

... More
First floor

6.85

104415

15243.1

... More
Terrace Floor

1.64

28076

17120

... More
RCC in Sill

-

-

-

... More
Ground floor

0.83

11350

13675.2

... More
First floor

0.83

12651

15243.1

... More
Terrace Floor

0.1

1712

17120

... More
Slab counter

0.8

865

1081.8

... More
RCC chajja

-

-

-

... More
Ground floor

27.4

29641

1081.8

... More
First floor

12.05

14727

1222.2

... More
Terrace Floor

2.6

3615

1390.5

... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550

-

-

-

... More
Foundation

184.72

1638374

8869.5

... More
SUPER STRUCTURE

-

-

-

... More
ground floor

264.12

2342612

8869.5

... More
First floor

207.99

1850112

8895.2

... More
Second floor / Terrace Floor

41.01

365895

8922.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in Foudation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

83.6

425783

5093.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

201.54

1034182

5131.4

... More
First floor

139.26

754663

5419.1

... More
Terrace Floor

37.61

216253

5749.9

... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)

-

-

-

... More
ground floor

1290.5

207512

160.8

... More
First floor

863.49

144030

166.8

... More
Terrace floor

363.64

62909

173

... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)

-

-

-

... More
Ground floor

900.62

204800

227.4

... More
First floor

484.95

112847

232.7

... More
Terrace floor

72.03

17157

238.2

... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.

-

-

-

... More
ground Floor

535.81

92802

173.2

... More
First Floor

415.87

73775

177.4

... More
Terrace Floor

63.96

11621

181.7

... More
Priming one coat with water bound wall cement primer. (Outside)

-

-

-

... More
Ground floor

1290.5

87624

67.9

... More
First floor

863.49

60962

70.6

... More
Terrace Floor

363.64

26654

73.3

... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
Ground Floor

535.81

37560

70.1

... More
First floor

900.82

63147

70.1

... More
Terrace floor

135.99

9532

70.1

... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

679

109183

160.8

... More
First floor

475.39

78011

164.1

... More
Second Floor

135.99

22778

167.5

... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

-

-

-

... More
Ground floor

1290.5

197317

152.9

... More
First floor

863.49

136776

158.4

... More
Terrace floor

363.64

59673

164.1

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground Floor

265.65

304647

1146.8

... More
First floor

265.65

307436

1157.3

... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground floor

149.7

186990

1249.1

... More
First floor

149.7

189355

1264.9

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent.ground Floor

-

-

-

... More
ground Floor

162.48

299255

1841.8

... More
First Floor

31.98

59236

1852.3

... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
ground Floor

73.88

136072

1841.8

... More
First Floor

36.95

68442

1852.3

... More
Terrace floor

3.54

6596

1863.4

... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/Kajaria/Rak/Ceramic or equivalent.(ground floor)

29.16

29340

1006.2

... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor

-

-

-

... More
Ground Floor

417.56

139673

334.5

... More
head room

76.16

30433

399.6

... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

5146.29

354167

68.82

... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

-

-

-

... More
ground Floor

121.91

24772

203.2

... More
First floor

30.65

6387

208.4

... More
terrace floor

18.9

4044

214

... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following: 4 nos Hinges on each leaf 1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock 1 Set D-type pull handle back to back on each leaf 1 no Concealed flush bolt in inactive leaf of Double door, if any 1 no vision glass on each leaf Fastners as required. The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.

21

168000

8000

... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant makeSeccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.Ground floor and first floor

5.04

24192

4800

... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge.(ground Floor and first floor)

34.66

190630

5500

... More
Providing "RAJSHRI/Armstrong/Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately).(Ground Floor,first&terrace floor)

76.5

55216

721.78

... More
Providing and Fixing WINSPIRE/Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.Ground Floor,first&terrace floor

64.35

353925

5500

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

365.48

98350

269.1

... More
Providing and Fixing NCL/Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.(ground Floor.first,terrace floor)

28.8

144000

5000

... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.

-

-

-

... More
Ground Floor

15.09

41639

2759.4

... More
First Floor

15.09

42042

2786.1

... More
WATER PROOFING

-

-

-

... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.

-

-

-

... More
Stage3:Supply and application ofSika Top Seal 107-the cementitious,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied

-

-

-

... More
Few parameters:Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10%

-

-

-

... More
Water Proofing to sunken slab area

150.92

75460

500

... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent

8.4

48720

5800

... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

-

-

-

... More
ground Floor

62.42

187859

3009.6

... More
First Floor

57.5

174368

3032.5

... More
Terrace Floor

39.36

120299

3056.4

... More
P.H.Woks

-

-

-

... More
INTERNAL P.H. WORKS

-

-

-

... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

-

-

-

... More
Ground Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

30

7479

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

40

14176

354.4

... More
In 1st Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

25

6232

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

35

12404

354.4

... More
32mm dia C-PVC pipe (Ashirbad/Supreme)

20

10296

514.8

... More
2nd Floor

-

-

-

... More
40mm dia C-PVC pipe (Ashirbad/Supreme)

120

81948

682.9

... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
250mm thick wall in Ground floor

10

549

54.9

... More
In 1st Floor

10

583

58.3

... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor

5

960

192.1

... More
In 1st Floor

5

1044

208.8

... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

55

10741

195.3

... More
In 1st Floor

45

9279

206.2

... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

-

-

-

... More
250mm to 375mm thick wall in Ground Floor to Ist Floor

25

5050

202

... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

-

-

-

... More
15mm dia CP Long Body Bib cock (Plaza/Amber/Aquatic)

17

11781

693

... More
15mm dia CP angle stop cock (Plaza/Amber/Aquatic)

32

18080

565

... More
20mm dia CP consealed stop cock (Plaza/Amber/Aquatic)

4

4431

1107.8

... More
15mm dia CP two in one bib cock (Plaza/Amber/Aquatic)

14

13421

958.7

... More
15mm dia CP Health faucet (Plaza/Amber/Aquatic)

14

7778

555.6

... More
15mm dia CP extension piece

69

5285

76.6

... More
15mm dia CP Pillar cock (Plaza/Amber/Aquatic)

4

3604

901

... More
25mm dia G.M or Brass F.W valve (Sakti make)

10

9296

929.6

... More
32mm dia G.M or Brass F.W valve (Sakti make)

2

2722

1361

... More
40mm dia G.M or Brass F.W valve (Sakti make)

2

3454

1727.4

... More
125mm dia CP gratings

18

1544

85.8

... More
15mm dia CP revolving shower (Plaza deluxe make)

4

2313

578.4

... More
15mm dia CP Sort Body Bib cock (Plaza/Amber/Aquatic)

4

3619

904.8

... More
15mm dia CP Long neck Pillar cock (Plaza/Amber/Aquatic)

8

9195

1149.4

... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)

8

18308

2288.5

... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
10 litres PVC L.L. Cistern (Slimline-white)

18

34488

1916

... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge

-

-

-

... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

20

4600

230

... More
75mm U-PVC plain bend

6

630

105.1

... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

150

57285

381.9

... More
110mm U-PVC door bend

8

2008

251.1

... More
110mm U-PVC door Tee

15

5304

353.6

... More
110mm U-PVC plain Tee

10

3163

316.3

... More
110mm dia U-PVC offset without ear

10

4777

477.7

... More
110mm U-PVC plain bend

20

3518

175.9

... More
110mm U-PVC vent cowl

12

1018

84.9

... More
110mm dia U-PVC 'P' trap

20

7622

381.1

... More
110mm dia U-PVC socket plain

10

1601

160.1

... More
75mm dia U-PVC socket plain

8

650

81.3

... More
PVC Clamp

30

1284

42.8

... More
110mm U-PVC door cross Tee

2

1102

551.2

... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)

-

-

-

... More
580mm size Orissa pan(Hindware/Parryware/Neycer)

4

14073

3518.3

... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
Flat Back lipped wall urinal [Medium] 380x580x350

8

18612

2326.5

... More
15mm dia Urinal spreder

8

4442

555.3

... More
32mm dia Dome wate

8

1028

128.5

... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
E.W.C. with seat cover (Parryware/Hindware/Neycer)

14

51889

3706.4

... More
EWC(Matrix set)No.70002(P-18)

1

66589

66589.4

... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)

4

21876

5469.2

... More
Under Counter basin(560x450)Hindware-No.10095

8

30947

3868.4

... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

-

-

-

... More
600mm x 450mm size B.E mirror

12

9819

818.3

... More
Large size mirror with frame(19x0.60x0.90)

6.48

5167

797.4

... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
450 x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)

4

2438

609.7

... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)

18

12706

705.9

... More
CP towel Ring (Plaza/Amber/Aquatic)

12

5557

463.1

... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
CP soap holder (Plaza/Amber/Aquatic)

22

4021

182.8

... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
600 x 450 x 250mm size S/S kitchen sink (Jayana make )

3

14786

4928.9

... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ist Floor

66.6

11062

166.1

... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge. In Ist Floor

66.6

49120

737.55

... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.

10

2734

273.4

... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor

8.47

5366

633.6

... More
In 1st Floor

7.61

4821

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor

5.65

39630

7014.3

... More
In 1st Floor

5.07

37225

7342.4

... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

-

-

-

... More
Gully Trap chamber

6

12343

2057.2

... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 760mm x 760mm x 460mm

5

47702

9540.5

... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge

28.8

29707

1031.5

... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge

10.8

28293

2619.8

... More
EXTERNAL PH WORK

-

-

-

... More
Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No.

-

-

-

... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

-

-

-

... More
Drilling of 200mm dia bore 0 to 30 mtr

30

23478

782.6

... More
Drilling of 200mm dia bore 31 to 45 mtr

15

11739

782.6

... More
Drilling of 150mm dia bore 41 to 125 mtr

25

19565

782.6

... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials

-

-

-

... More
Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

30

5415

180.5

... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs

15

2707

180.5

... More
Cost of 200mm dia PVC schedule - 80 pipe

45.5

80789

1775.6

... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

1

6586

6586

... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing

-

-

-

... More
Sanitary sealing upto 5 mtr below ground level

1

1173

1173.1

... More
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

0.2

1402

7014.3

... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
2HP Three Phase 5 stage submersible pump set.

1

16625

16625.6

... More
DOL control panel

1

3805

3805.5

... More
50mm S. S. Nipple, S. S. bolt & clips

2

2000

1000

... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap

1

1200

1200

... More
2.50mm Sqm Submersible flat cable

120

15372

128.1

... More
Steel rope with cover

80

2136

26.7

... More
20mm dia rigid U-PVC pipe

60

414

6.9

... More
40mm dia HDPE pipe

50

8930

178.6

... More
Labour charges for lowering, testing, commissioning & transportation to site etc.

1

2000

2000

... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge

-

-

-

... More
50mm dia PVC ASTM

50

17770

355.4

... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

13.5

3019

223.67

... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 910mm x 910mm x 910mm

4

71719

17929.9

... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
1.40m dia x 2.00m deep soakway pit

1

21887

21887.8

... More
1.20m dia x 2.00m deep soakway pit

2

37232

18616.2

... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
110mm dia u-pvc pipe alround concrete

50

75930

1518.6

... More
160mm dia u-pvc pipe alround concrete

25

60087

2403.5

... More
Construction 1 No 100 users RCC Septic tank

-

-

-

... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-

-

-

... More
1st Depth

59.4

13286

223.67

... More
Addl. Depth of 1.5 m

59.4

14261

240.1

... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

-

-

-

... More
In ground floor

5.94

3763

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

-

-

-

... More
In ground floor

5.94

30522

5138.5

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

-

-

-

... More
In ground floor

3.47

24339

7014.3

... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

31.62

245434

7762

... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
For Roof slab

37.15

24961

671.9

... More
For RCC wall

160.2

162010

1011.3

... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
In ground floor

31.62

282037

8919.6

... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

167.64

28431

169.6

... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

2

1077

538.7

... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

10.8

1342

124.3

... More
PVC tank-2000 Ltr capacity

-

-

-

... More
Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 Ltr capacity PVC Tank (Sintex make).

4

101365

25341.4

... More
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Staging for 2000 Ltr capacity PVC Tank .

4

79965

19991.4

... More
CERAMIC FLOOR TILES

-

-

-

... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles. Ground Floor

99.96

119142

1191.9

... More
First Floor

94.2

114424

1214.7

... More
CERAMIC WALL TILES

-

-

-

... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

-

-

-

... More
Ground Floor

177.14

222629

1256.8

... More
First Floor

152.25

196356

1289.7

... More
FRP DOOR SHUTTER

-

-

-

... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor and first floor

33.08

142687

4313.4

... More
FRP DOOR FRAME

-

-

-

... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor

99.75

62463

626.2

... More
Electrical

-

-

-

... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

-

-

-

... More
GROUP-A

88

49280

560

... More
GROUP-B

30

24060

802

... More
GROUP-C

30

33210

1107

... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved with 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

14

7518

537

... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for Office standard.

16

3088

193

... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant make & model ISI marked as approved , complete suitable for Office standard.(Maximum 02 nos point in one circuit).

36

18432

512

... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make A catagory ISI marked as approved,

19

12331

649

... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

2

2778

1389

... More
Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Havells/norpack or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

266

35644

134

... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)

340

50320

148

... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

233

61745

265

... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB) (2X4+1X2.5)

211

34815

165

... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB) (4X4+2X2.5)

88

21824

248

... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)

21

4116

196

... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit. (4X6+2X2.5)

38

11172

294

... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(4X10+2X4)

38

15998

421

... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

4

2488

622

... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

-

-

-

... More
4 moudle(125mmx75mm)

1

270

270

... More
1 moudle(75mmx75mm)

6

1338

223

... More
12 moudle(200mmx150mm)

2

970

485

... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved

-

-

-

... More
20 MM

22

2222

101

... More
25 MM

11

1133

103

... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.

10

1080

108

... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge

4

2480

620

... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.

2

412

206

... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge ..

16

992

62

... More
Supplying,fixing of Blanking plate(modular type in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar complete suitable for Office.

8

336

42

... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.

7

21854

3122

... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge.

8

29384

3673

... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, .(With fan Regulator)

22

46882

2131

... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved)

4

6088

1522

... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved.).

104

83304

801

... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )

8

5888

736

... More
Supplying, Erection, Fixing, connection & testing of LED Street light with movable braket at building top of Lighting Technology/Philips/Bajaj or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.

4

12812

3203

... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

40

1280

32

... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge.

-

-

-

... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)

4

8692

2173

... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)

2

3276

1638

... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of MakeLEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

670

335

... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

56

7504

134

... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.

2

4500

2250

... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

2

3380

1690

... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

5290

2645

... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years

2

5064

2532

... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

66

6402

97

... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

3

3297

1099

... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.

1

2850

2850

... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
3 core x 2.5 sq mm (for small power,street light)

56

4920

87.87

... More
3.5core x 35 sq mm

46

10046

218.41

... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

46

6808

148

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

-

-

-

... More
3.5 core x35 sq mm

4

1352

338

... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

-

-

-

... More
50 mm dia

2

828

414

... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.

1

86232

86232

... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )

1

12127

12127

... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

1

5089

5089

... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )

4

3600

900

... More
Banamaliprasad

-

-

-

... More
Earth work in excavation IN ALL KINDS OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.

485.07

74652

153.9

... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.1st Extra loft of 1.5m(up to 7.5m)

130.66

22251

170.3

... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

184.72

15793

85.5

... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).

623.89

735004

1178.1

... More
Carriage of excavated earth by mechanical means within 5 KM lead

431.01

120165

278.8

... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.

115.8

660152

5700.8

... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.

-

-

-

... More
foundation

82.76

549940

6645

... More
RCC in Plinth beam

40.21

300143

7464.4

... More
up toplinth

18.81

270660

14389.2

... More
SUPER STRUCTURE

-

-

-

... More
RCC in column

-

-

-

... More
Ground floor

48.91

703775

14389.2

... More
First floor

36.04

580236

16099.8

... More
Terrace Floor

9.9

179665

18148

... More
RCC in Roof beam

-

-

-

... More
Ground floor

38.51

554128

14389.2

... More
First floor

34.89

561722

16099.8

... More
Terrace Floor

5.46

99088

18148

... More
slab

-

-

-

... More
Ground floor

80.26

1045017

13020.4

... More
First floor

62.19

899093

14457.2

... More
Terrace Floor

11.78

190563

16176.9

... More
RCC in S.case

-

-

-

... More
Ground floor

17.38

249260

14341.8

... More
First floor

12.18

195402

16042.9

... More
RCC in Lintel

-

-

-

... More
Ground floor

6.94

94905

13675.2

... More
First floor

6.85

104415

15243.1

... More
Terrace Floor

1.64

28076

17120

... More
RCC in Sill

-

-

-

... More
Ground floor

0.83

11350

13675.2

... More
First floor

0.83

12651

15243.1

... More
Terrace Floor

0.1

1712

17120

... More
Slab counter

0.8

865

1081.8

... More
RCC chajja

-

-

-

... More
Ground floor

27.4

29641

1081.8

... More
First floor

12.05

14727

1222.2

... More
Terrace Floor

2.6

3615

1390.5

... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550

-

-

-

... More
Foundation

184.72

1638374

8869.5

... More
SUPER STRUCTURE

-

-

-

... More
ground floor

264.12

2342612

8869.5

... More
First floor

207.99

1850112

8895.2

... More
Second floor / Terrace Floor

41.01

365895

8922.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in Foudation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

83.6

425783

5093.1

... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

201.54

1034182

5131.4

... More
First floor

139.26

754663

5419.1

... More
Terrace Floor

37.61

216253

5749.9

... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)

-

-

-

... More
ground floor

1290.5

207512

160.8

... More
First floor

863.49

144030

166.8

... More
Terrace floor

363.64

62909

173

... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)

-

-

-

... More
Ground floor

900.62

204800

227.4

... More
First floor

484.95

112847

232.7

... More
Terrace floor

72.03

17157

238.2

... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.

-

-

-

... More
ground Floor

535.81

92802

173.2

... More
First Floor

415.87

73775

177.4

... More
Terrace Floor

63.96

11621

181.7

... More
Priming one coat with water bound wall cement primer. (Outside)

-

-

-

... More
Ground floor

1290.5

87624

67.9

... More
First floor

863.49

60962

70.6

... More
Terrace Floor

363.64

26654

73.3

... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
Ground Floor

535.81

37560

70.1

... More
First floor

900.82

63147

70.1

... More
Terrace floor

135.99

9532

70.1

... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.

-

-

-

... More
ground floor

679

109183

160.8

... More
First floor

475.39

78011

164.1

... More
Second Floor

135.99

22778

167.5

... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.

-

-

-

... More
Ground floor

1290.5

197317

152.9

... More
First floor

863.49

136776

158.4

... More
Terrace floor

363.64

59673

164.1

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground Floor

265.65

304647

1146.8

... More
First floor

265.65

307436

1157.3

... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
Ground floor

149.7

186990

1249.1

... More
First floor

149.7

189355

1264.9

... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent.ground Floor

-

-

-

... More
ground Floor

162.48

299255

1841.8

... More
First Floor

31.98

59236

1852.3

... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent

-

-

-

... More
ground Floor

73.88

136072

1841.8

... More
First Floor

36.95

68442

1852.3

... More
Terrace floor

3.54

6596

1863.4

... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/Kajaria/Rak/Ceramic or equivalent.(ground floor)

29.16

29340

1006.2

... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor

-

-

-

... More
Ground Floor

417.56

139673

334.5

... More
head room

76.16

30433

399.6

... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

5146.29

354167

68.82

... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.

-

-

-

... More
ground Floor

121.91

24772

203.2

... More
First floor

30.65

6387

208.4

... More
terrace floor

18.9

4044

214

... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following: 4 nos Hinges on each leaf 1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock 1 Set D-type pull handle back to back on each leaf 1 no Concealed flush bolt in inactive leaf of Double door, if any 1 no vision glass on each leaf Fastners as required. The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.

21

168000

8000

... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant makeSeccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.Ground floor and first floor

5.04

24192

4800

... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge.(ground Floor and first floor)

34.66

190630

5500

... More
Providing "RAJSHRI/Armstrong/Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately).(Ground Floor,first&terrace floor)

76.5

55216

721.78

... More
Providing and Fixing WINSPIRE/Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.Ground Floor,first&terrace floor

64.35

353925

5500

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

365.48

98350

269.1

... More
Providing and Fixing NCL/Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.(ground Floor.first,terrace floor)

28.8

144000

5000

... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.

-

-

-

... More
Ground Floor

15.09

41639

2759.4

... More
First Floor

15.09

42042

2786.1

... More
WATER PROOFING

-

-

-

... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.

-

-

-

... More
Stage3:Supply and application ofSika Top Seal 107-the cementitious,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied

-

-

-

... More
Few parameters:Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10%

-

-

-

... More
Water Proofing to sunken slab area

150.92

75460

500

... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent

8.4

48720

5800

... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge

-

-

-

... More
ground Floor

62.42

187859

3009.6

... More
First Floor

57.5

174368

3032.5

... More
Terrace Floor

39.36

120299

3056.4

... More
PH Work

-

-

-

... More
Internal PH Work

-

-

-

... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

-

-

-

... More
Ground Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

30

7479

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

40

14176

354.4

... More
In 1st Floor

-

-

-

... More
20mm dia C-PVC pipe (Ashirbad/Supreme)

25

6232

249.3

... More
25mm dia C-PVC pipe (Ashirbad/Supreme)

35

12404

354.4

... More
32mm dia C-PVC pipe (Ashirbad/Supreme)

20

10296

514.8

... More
2nd Floor

-

-

-

... More
40mm dia C-PVC pipe (Ashirbad/Supreme)

120

81948

682.9

... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
250mm thick wall in Ground floor

10

549

54.9

... More
In 1st Floor

10

583

58.3

... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor

5

960

192.1

... More
In 1st Floor

5

1044

208.8

... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

55

10741

195.3

... More
In 1st Floor

45

9279

206.2

... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

-

-

-

... More
250mm to 375mm thick wall in Ground Floor to Ist Floor

25

5050

202

... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

-

-

-

... More
15mm dia CP Long Body Bib cock (Plaza/Amber/Aquatic)

17

11781

693

... More
15mm dia CP angle stop cock (Plaza/Amber/Aquatic)

32

18080

565

... More
20mm dia CP consealed stop cock (Plaza/Amber/Aquatic)

4

4431

1107.8

... More
15mm dia CP two in one bib cock (Plaza/Amber/Aquatic)

14

13421

958.7

... More
15mm dia CP Health faucet (Plaza/Amber/Aquatic)

14

7778

555.6

... More
15mm dia CP extension piece

69

5285

76.6

... More
15mm dia CP Pillar cock (Plaza/Amber/Aquatic)

4

3604

901

... More
25mm dia G.M or Brass F.W valve (Sakti make)

10

9296

929.6

... More
32mm dia G.M or Brass F.W valve (Sakti make)

2

2722

1361

... More
40mm dia G.M or Brass F.W valve (Sakti make)

2

3454

1727.4

... More
125mm dia CP gratings

18

1544

85.8

... More
15mm dia CP revolving shower (Plaza deluxe make)

4

2313

578.4

... More
15mm dia CP Sort Body Bib cock (Plaza/Amber/Aquatic)

4

3619

904.8

... More
15mm dia CP Long neck Pillar cock (Plaza/Amber/Aquatic)

8

9195

1149.4

... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)

8

18308

2288.5

... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
10 litres PVC L.L. Cistern (Slimline-white)

18

34488

1916

... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge

-

-

-

... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

20

4600

230

... More
75mm U-PVC plain bend

6

630

105.1

... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

150

57285

381.9

... More
110mm U-PVC door bend

8

2008

251.1

... More
110mm U-PVC door Tee

15

5304

353.6

... More
110mm U-PVC plain Tee

10

3163

316.3

... More
110mm dia U-PVC offset without ear

10

4777

477.7

... More
110mm U-PVC plain bend

20

3518

175.9

... More
110mm U-PVC vent cowl

12

1018

84.9

... More
110mm dia U-PVC 'P' trap

20

7622

381.1

... More
110mm dia U-PVC socket plain

10

1601

160.1

... More
75mm dia U-PVC socket plain

8

650

81.3

... More
PVC Clamp

30

1284

42.8

... More
110mm U-PVC door cross Tee

2

1102

551.2

... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)

-

-

-

... More
580mm size Orissa pan(Hindware/Parryware/Neycer)

4

14073

3518.3

... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
Flat Back lipped wall urinal [Medium] 380x580x350

8

18612

2326.5

... More
15mm dia Urinal spreder

8

4442

555.3

... More
32mm dia Dome wate

8

1028

128.5

... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
E.W.C. with seat cover (Parryware/Hindware/Neycer)

14

51889

3706.4

... More
EWC(Matrix set)No.70002(P-18)

1

66589

66589.4

... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)

4

21876

5469.2

... More
Under Counter basin(560x450)Hindware-No.10095

8

30947

3868.4

... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

-

-

-

... More
600mm x 450mm size B.E mirror

12

9819

818.3

... More
Large size mirror with frame(19x0.60x0.90)

6.48

5167

797.4

... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
450 x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)

4

2438

609.7

... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)

18

12706

705.9

... More
CP towel Ring (Plaza/Amber/Aquatic)

12

5557

463.1

... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

-

-

-

... More
CP soap holder (Plaza/Amber/Aquatic)

22

4021

182.8

... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
600 x 450 x 250mm size S/S kitchen sink (Jayana make )

3

14786

4928.9

... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ist Floor

66.6

11062

166.1

... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge. In Ist Floor

66.6

49120

737.55

... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.

10

2734

273.4

... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor

8.47

5366

633.6

... More
In 1st Floor

7.61

4821

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor

5.65

39630

7014.3

... More
In 1st Floor

5.07

37225

7342.4

... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

-

-

-

... More
Gully Trap chamber

6

12343

2057.2

... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 760mm x 760mm x 460mm

5

47702

9540.5

... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge

28.8

29707

1031.5

... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge

10.8

28293

2619.8

... More
EXTERNAL PH WORK

-

-

-

... More
Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No.

-

-

-

... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

-

-

-

... More
Drilling of 200mm dia bore 0 to 30 mtr

30

23478

782.6

... More
Drilling of 200mm dia bore 31 to 45 mtr

15

11739

782.6

... More
Drilling of 150mm dia bore 41 to 125 mtr

25

19565

782.6

... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials

-

-

-

... More
Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

30

5415

180.5

... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs

15

2707

180.5

... More
Cost of 200mm dia PVC schedule - 80 pipe

45.5

80789

1775.6

... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

1

6586

6586

... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing

-

-

-

... More
Sanitary sealing upto 5 mtr below ground level

1

1173

1173.1

... More
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

0.2

1402

7014.3

... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.

-

-

-

... More
2HP Three Phase 5 stage submersible pump set.

1

16625

16625.6

... More
DOL control panel

1

3805

3805.5

... More
50mm S. S. Nipple, S. S. bolt & clips

2

2000

1000

... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap

1

1200

1200

... More
2.50mm Sqm Submersible flat cable

120

15372

128.1

... More
Steel rope with cover

80

2136

26.7

... More
20mm dia rigid U-PVC pipe

60

414

6.9

... More
40mm dia HDPE pipe

50

8930

178.6

... More
Labour charges for lowering, testing, commissioning & transportation to site etc.

1

2000

2000

... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge

-

-

-

... More
50mm dia PVC ASTM

50

17770

355.4

... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

13.5

3019

223.67

... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
Inside size 910mm x 910mm x 910mm

4

71719

17929.9

... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

-

-

-

... More
1.40m dia x 2.00m deep soakway pit

1

21887

21887.8

... More
1.20m dia x 2.00m deep soakway pit

2

37232

18616.2

... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

-

-

-

... More
110mm dia u-pvc pipe alround concrete

50

75930

1518.6

... More
160mm dia u-pvc pipe alround concrete

25

60087

2403.5

... More
Construction 1 No 100 users RCC Septic tank

-

-

-

... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

-

-

-

... More
1st Depth

59.4

13286

223.67

... More
Addl. Depth of 1.5 m

59.4

14261

240.1

... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

-

-

-

... More
In ground floor

5.94

3763

633.6

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

-

-

-

... More
In ground floor

5.94

30522

5138.5

... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

-

-

-

... More
In ground floor

3.47

24339

7014.3

... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

31.62

245434

7762

... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
For Roof slab

37.15

24961

671.9

... More
For RCC wall

160.2

162010

1011.3

... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

-

-

-

... More
In ground floor

31.62

282037

8919.6

... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

167.64

28431

169.6

... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

2

1077

538.7

... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

10.8

1342

124.3

... More
PVC tank-2000 Ltr capacity

-

-

-

... More
Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 Ltr capacity PVC Tank (Sintex make).

4

101365

25341.4

... More
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Staging for 2000 Ltr capacity PVC Tank .

4

79965

19991.4

... More
CERAMIC FLOOR TILES

-

-

-

... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles. Ground Floor

99.96

119142

1191.9

... More
First Floor

94.2

114424

1214.7

... More
CERAMIC WALL TILES

-

-

-

... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

-

-

-

... More
Ground Floor

177.14

222629

1256.8

... More
First Floor

152.25

196356

1289.7

... More
FRP DOOR SHUTTER

-

-

-

... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor and first floor

33.08

142687

4313.4

... More
FRP DOOR FRAME

-

-

-

... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

-

-

-

... More
ground floor

99.75

62463

626.2

... More
Electrical

-

-

-

... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

-

-

-

... More
GROUP-A

88

49280

560

... More
GROUP-B

30

24060

802

... More
GROUP-C

30

33210

1107

... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved with 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.

14

7518

537

... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for Office standard.

16

3088

193

... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant make & model ISI marked as approved , complete suitable for Office standard.(Maximum 02 nos point in one circuit).

36

18432

512

... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make A catagory ISI marked as approved,

19

12331

649

... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

2

2778

1389

... More
Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Havells/norpack or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

266

35644

134

... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)

340

50320

148

... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

233

61745

265

... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB) (2X4+1X2.5)

211

34815

165

... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB) (4X4+2X2.5)

88

21824

248

... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)

21

4116

196

... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit. (4X6+2X2.5)

38

11172

294

... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(4X10+2X4)

38

15998

421

... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.

4

2488

622

... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

-

-

-

... More
4 moudle(125mmx75mm)

1

270

270

... More
1 moudle(75mmx75mm)

6

1338

223

... More
12 moudle(200mmx150mm)

2

970

485

... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved

-

-

-

... More
20 MM

22

2222

101

... More
25 MM

11

1133

103

... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.

10

1080

108

... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge

4

2480

620

... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.

2

412

206

... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge ..

16

992

62

... More
Supplying,fixing of Blanking plate(modular type in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar complete suitable for Office.

8

336

42

... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.

7

21854

3122

... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge.

8

29384

3673

... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, .(With fan Regulator)

22

46882

2131

... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved)

4

6088

1522

... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved.).

104

83304

801

... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )

8

5888

736

... More
Supplying, Erection, Fixing, connection & testing of LED Street light with movable braket at building top of Lighting Technology/Philips/Bajaj or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.

4

12812

3203

... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

40

1280

32

... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge.

-

-

-

... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)

4

8692

2173

... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)

2

3276

1638

... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of MakeLEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

670

335

... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

56

7504

134

... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.

2

4500

2250

... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years

2

3380

1690

... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.

2

5290

2645

... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years

2

5064

2532

... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

66

6402

97

... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

3

3297

1099

... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.

1

2850

2850

... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

-

-

-

... More
3 core x 2.5 sq mm (for small power,street light)

56

4920

87.87

... More
3.5core x 35 sq mm

46

10046

218.41

... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

46

6808

148

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.

-

-

-

... More
3.5 core x35 sq mm

4

1352

338

... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

-

-

-

... More
50 mm dia

2

828

414

... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.

1

86232

86232

... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )

1

12127

12127

... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.

1

5089

5089

... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )

4

3600

900



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.