Pradhan Mantri Gram Sadak Yojana Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,50,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CERWI_93921_1Bid Award Id
ViewTender No
CCERWCSBD Online-23/2023-24Tender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
198.81
16998
85.5
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).
582.86
302212
518.5
... More
Carriage of excavated earth by mechanical means within 5 KM lead
2062
574885
278.8
... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.
149.43
731863
4897.7
... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
-
-
-
... More
foundation
65.34
384316
5881.8
... More
RCC in Plinth beam
40.17
269376
6705.9
... More
column up to plinth
27.47
375248
13660.3
... More
RCC in column
-
-
-
... More
Ground floor
57.92
791204
13660.3
... More
First floor
54.09
831806
15378.2
... More
Terrace Floor
9.9
172607
17435.1
... More
RCC in Roof beam
-
-
-
... More
Ground floor
38.47
525511
13660.3
... More
First floor
34.84
535776
15378.2
... More
Terrace Floor
5.46
95195
17435.1
... More
Slab
-
-
-
... More
Ground floor
66.89
823295
12308.2
... More
First floor
62.2
855604
13755.7
... More
Terrace Floor
11.78
182449
15488.1
... More
RCC in S.case
-
-
-
... More
Ground floor
17.37
236282
13602.9
... More
First floor
12.18
186467
15309.3
... More
RCC in Lintel
-
-
-
... More
Ground floor
6.2
80363
12961.8
... More
First floor
6.16
89566
14540
... More
Terrace Floor
1.51
24808
16429.3
... More
RCC in Sill
-
-
-
... More
Ground floor
0.76
9850
12961.8
... More
First floor
0.75
10905
14540
... More
Terrace Floor
0.08
1314
16429.3
... More
RCC chajja
-
-
-
... More
Ground floor
32.88
34106
1037.3
... More
First floor
14.46
17046
1178.9
... More
Terrace Floor
3.12
4207
1348.4
... More
counter slab
8
8298
1037.3
... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550
-
-
-
... More
ground floor
363.19
3221277
8869.4
... More
First floor
181.67
1615972
8895.1
... More
Second floor / Terrace Floor
30.58
272834
8922
... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Foundation
142.63
715574
5017
... More
Ground floor
96.46
487643
5055.4
... More
First floor
112.62
601739
5343.1
... More
Terrace Floor
34.59
196260
5673.9
... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)
-
-
-
... More
ground floor
958.49
143485
149.7
... More
First floor
863.47
134355
155.6
... More
Terrace floor
363.62
58833
161.8
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)
-
-
-
... More
ground floor
568.61
121739
214.1
... More
First floor
484.94
106395
219.4
... More
Terrace floor
72.02
16190
224.8
... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
... More
ground Floor
589.96
98523
167
... More
First Floor
467.62
80009
171.1
... More
Terrace Floor
63.96
11218
175.4
... More
Priming one coat with water bound wall cement primer. (Outside)
-
-
-
... More
Ground floor
958.49
65119
67.94
... More
First floor
863.47
60011
69.5
... More
Terrace Floor
363.62
25889
71.2
... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
1158.57
81215
70.1
... More
First floor
952.56
68108
71.5
... More
Terrace floor
135.98
9926
73
... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
ground floor
733.14
117888
160.8
... More
First floor
527.13
86502
164.1
... More
Second Floor
135.98
22776
167.5
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground floor
958.49
146553
152.9
... More
First floor
863.47
136773
158.4
... More
Terrace floor
363.62
59670
164.1
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground Floor
265.64
300491
1131.2
... More
First floor
265.64
303281
1141.7
... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality,colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge.Make Johnson / Kajaria / Rak /Ceramic or equivalent
-
-
-
... More
Ground floor
149.7
185104
1236.5
... More
First floor
149.7
187469
1252.3
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
ground Floor
162.48
293877
1808.7
... More
First Floor
31.98
58178
1819.2
... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson / Kajaria / Rak/ Ceramic or equivalent
-
-
-
... More
ground Floor
73.88
133626
1808.7
... More
First Floor
36.94
67201
1819.2
... More
Terrace Floor
3.53
6460
1830.3
... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
ground floor
29.16
28629
981.8
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
5146.29
415768
80.79
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
ground Floor
121.91
24772
203.2
... More
First floor
30.65
6387
208.4
... More
terrace floor
18.9
4044
214
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
-
-
-
... More
ground Floor,first &terrace floor
21
168000
8000
... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant makeSeccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.
-
-
-
... More
Ground floor and first floor
5.04
24272
4816
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
-
-
-
... More
ground Floor and first floor
34.65
207900
6000
... More
Providing "RAJSHRI/Armstrong/Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately)
-
-
-
... More
Ground Floor,first&terrace floor
76.5
55216
721.78
... More
Providing and Fixing WINSPIRE/Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.
-
-
-
... More
Ground Floor,first&terrace floor
64.35
386100
6000
... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent
-
-
-
... More
Metal Framed Glazed Door
8.4
48720
5800
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
365.48
98350
269.1
... More
Providing and Fixing NCL/Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.
-
-
-
... More
ground Floor.first,terrace floor
28.8
144000
5000
... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.
-
-
-
... More
Ground Floor
15.09
41639
2759.4
... More
First Floor
15.09
42042
2786.1
... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.
Stage3:Supply and application ofSika / MYK/ Fosroc or eqivalent make the cementitious,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied
Few parameters:Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10%
150.92
75460
500
... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
62.42
185999
2979.8
... More
First Floor
57.5
172649
3002.6
... More
Terrace Floor
39.36
119126
3026.6
... More
MPH-500 Capacity-(Internal PH Work)
-
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
30
7479
249.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
40
14176
354.4
... More
In 1st Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
20
5106
255.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
30
10821
360.7
... More
32mm dia C-PVC pipe (Ashirbad/Supreme)
20
10422
521.1
... More
In 2nd Floor
-
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme)
85
58616
689.6
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
250mm thick wall in Ground floor
14
765
54.7
... More
In 1st Floor
13
756
58.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
2
383
191.8
... More
In 1st Floor
8
1668
208.5
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
70
13496
192.8
... More
In 1st Floor
50
10185
203.7
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall
-
-
-
... More
in Ground Floor to Ist Floor
30
6033
201.1
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Long Body Bib cock (Jaquar)
16
25712
1607
... More
15mm dia CP angle stop cock (Jaquar)
32
33052
1032.9
... More
20mm dia CP consealed stop cock (Jaquar)
5
9348
1869.6
... More
15mm dia CP two in one bib cock (Jaquar)
19
26324
1385.5
... More
15mm dia CP Health faucet (Jaquar)
19
25857
1360.9
... More
15mm dia CP extension piece
69
5285
76.6
... More
15mm dia CP Pillar cock (Jaquar)
12
21753
1812.8
... More
25mm dia G.M or Brass F.W valve (Sakti make)
15
20563
1370.9
... More
32mm dia G.M or Brass F.W valve
1
1632
1632.1
... More
40mm dia G.M or Brass F.W valve
4
8395
2098.9
... More
125mm dia CP gratings
33
2831
85.8
... More
15mm dia CP revolving shower (Jaquar)
5
13006
2601.3
... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)
8
18308
2288.5
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
10 litres PVC L.L. Cistern (Slimline-white)
18
34488
1916
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)
4
920
230
... More
75mm U-PVC plain bend
6
687
114.6
... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
174
66450
381.9
... More
110mm U-PVC door bend
6
1506
251.1
... More
110mm U-PVC door Tee
28
9900
353.6
... More
110mm U-PVC plain Tee
23
7274
316.3
... More
110mm dia U-PVC offset without ear
16
4017
251.1
... More
110mm U-PVC plain bend
26
5397
207.6
... More
110mm U-PVC vent cowl
16
1358
84.9
... More
110mm dia U-PVC 'P' trap
10
3811
381.1
... More
110mm dia U-PVC socket plain
5
800
160.1
... More
75mm dia U-PVC socket plain
1
81
81.3
... More
PVC Clamp
30
1284
42.8
... More
110mm U-PVC door cross Tee
2
846
423
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)
-
-
-
... More
580mm size Orissa pan (Hindware/ Parryware / Neycer)
4
11634
2908.7
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Halfstall Urinal(Parryware/Hindware/Neycer)
8
50063
6257.9
... More
15mm dia Urinal spreder
8
4442
555.3
... More
32mm dia Dome wate
8
1028
128.5
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
E.W.C. with seat cover (Parryware/Hindware/Neycer)
14
45626
3259
... More
EWC(Matrix set)No.70002(P-18)
1
66589
66589.4
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware)
8
24902
3112.8
... More
Supplying all materials, labour T&P and fixing Pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware)
8
19386
2423.3
... More
Under Counter basin(560x450)Hindware-No.10095
4
15491
3872.8
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
600mm x 450mm size B.E mirror
8
6546
818.3
... More
Large size mirror with frame
-
-
-
... More
2x3.40x0.90=
6.12
10918
1784
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 125mm plate glass shelf with CP guard rails
5
3625
725
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)
19
19427
1022.5
... More
CP towel Ring (Plaza/Amber/Aquatic)
20
10936
546.8
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Plaza/Amber/Aquatic)
39
12386
317.6
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 450 x 250mm size S/S (Jayana make )
3
13717
4572.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ist Floor
75.24
12316
163.7
... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge.
-
-
-
... More
In Ist Floor
75.24
55493
737.55
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
8.47
5366
633.6
... More
In 1st Floor
7.61
4878
641
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. - In Ground Floor
5.65
38800
6867.3
... More
In 1st Floor
5.07
36480
7195.4
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
-
-
-
... More
Gully Trap chamber
6
10379
1729.9
... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 760mm x 760mm x 460mm
4
35658
8914.6
... More
Supplying all materials, labour, T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C.
-
-
-
... More
6x1.20x0.45=
3.24
4429
1367.1
... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
3.38
3486
1031.5
... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
15.68
41078
2619.8
... More
MPH-500 Capacity-(EXTERNAL PH WORK)
-
-
-
... More
Sinking of 200mmx150mm dia Bore Well Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore 0 to 30 mtr
30
23478
782.6
... More
Drilling of 200mm dia bore 31 to 45 mtr
15
11739
782.6
... More
Drilling of 150mm dia bore 41 to 125 mtr
25
19565
782.6
... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials
-
-
-
... More
Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
30
5415
180.5
... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
15
2707
180.5
... More
Cost of 200mm dia PVC schedule - 80 pipe
45.5
80789
1775.6
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
1
6586
6586
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
1HP Single Phase submersible pump set.
1
15849
15849.15
... More
DOL control panel
1
3805
3805.5
... More
50mm S. S. Nipple, S. S. bolt & clips
2
2000
1000
... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
1
1200
1200
... More
2.50mm Sqm Submersible flat cable
60
7686
128.1
... More
Steel rope with cover
50
1335
26.7
... More
20mm dia rigid U-PVC pipe for Electrical cable
60
414
6.9
... More
40mm dia HDPE pipe
50
5680
113.6
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge
-
-
-
... More
40mm dia CPVC pipe
60
40974
682.9
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
-
-
-
... More
30m x 0.45m x 0.60m =60.00
8.1
1811
223.7
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 910mm x 910mm x 910mm
4
61987
15496.8
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
1.40m dia x 2.00m deep soakway pit
1
20220
20220.8
... More
1.20m dia x 2.00m deep soakway pit
2
34368
17184.4
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
51
80223
1573
... More
160mm dia u-pvc pipe alround concrete
35
85886
2453.9
... More
Construction 1 No 100 users RCC Septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
59.6
13332
223.7
... More
- do - with addl. Depth of 1.5 m
59.4
14261
240.1
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
Septic Tank
Bore Well Chamber
6.09
3858
633.6
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
Septic Tank
Bore Well Chamber
6.04
30563
5060.2
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
3.47
23829
6867.3
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash .bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. -- In Foundation & Plinth in CM (1:4)
-
-
-
... More
Bore Well Chamber- 2 x (1.25+0.75) x 0.25 x 0.90=
0.9
4768
5298.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
32.07
242667
7566.8
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Roof slab
Septic Tank out side
Bore Well chamber
33.51
22515
671.9
... More
For RCC wall
-
-
-
... More
Inside
Out Side
Partition Wall
163.2
165044
1011.3
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
25.65
237529
9260.4
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
112.5
18888
167.9
... More
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.- 12mm thick C.P with C.M. (1:6) Bore well chamber
7.2
1090
151.5
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
1065
532.9
... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.
10
2734
273.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
1355
125.5
... More
Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of 2000 liter capacity FG Over Head Tank) on roof of 1st Floor
5
107846
21569.3
... More
Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly ash brick work in c.m, (1:6) in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size KB. bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.64mtr xl.64mtr x0.l0mtr thick, R.C.C. beam of size 0.25m X 0.30m and 2.61m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C (2000 liter capacity FG Over Head Tank on roof of 1st Floor)
5
131273
26254.6
... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.
-
-
-
... More
Ground Floor
49.78
59292
1191.1
... More
First Floor
49.78
63887
1283.4
... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
173.36
216804
1250.6
... More
First Floor
154.64
198464
1283.4
... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete
-
-
-
... More
ground floor and first floor
32.9
141910
4313.4
... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
-
-
-
... More
ground floor
115.35
72232
626.2
... More
MPH-500 Capacity-(Electrical Works)
-
-
-
... More
Sub-Head I (modular Wiring Items)
-
-
-
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.
-
-
-
... More
GROUP-A
88
49280
560
... More
GROUP-B
30
24060
802
... More
GROUP-C
30
33210
1107
... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved with 6A modular type switch ISI marked Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.
14
7518
537
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for Office standard.
16
3088
193
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant make & model ISI marked as approved , complete suitable for Office standard.(Maximum 02 nos point in one circuit).
36
18432
512
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make A catagory ISI marked as approved,
19
12331
649
... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.
2
2778
1389
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Havells/norpack or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
266
35644
134
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
340
50320
148
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
233
61745
265
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB) (2X4+1X2.5)
211
34815
165
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB) (4X4+2X2.5)
88
21824
248
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
21
4116
196
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit. (4X6+2X2.5)
38
11172
294
... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(4X10+2X4)
38
15998
421
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Havells/C & S/Legrand/Schneider/Hagar or equievalant reputed make & model A catagory ISI marked as approved.
4
2488
622
... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
... More
4 moudle(125mmx75mm)
1
270
270
... More
1 moudle(75mmx75mm)
6
1338
223
... More
12 moudle(200mmx150mm)
2
970
485
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE AKG/Anchor/Havells/norpack or equievalant reputed make A catagory ISI marked as approved
-
-
-
... More
20 MM
22
2222
101
... More
25 MM
11
1133
103
... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.
9.5
1026
108
... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge
4
2480
620
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Havells/C & S/Legrand/Schneider/Hagar make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.
2
412
206
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge ..
16
992
62
... More
Supplying,fixing of Blanking plate(modular type in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/C & S/Legrand/Schneider/Hagar complete suitable for Office.
8
336
42
... More
Sub-Head II (Light fitting Fixture & Fan)
-
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
7
21854
3122
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge.
8
29384
3673
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, .(With fan Regulator)
22
46882
2131
... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved)
4
6088
1522
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved.).
104
83304
801
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )
8
5888
736
... More
Supplying, Erection, Fixing, connection & testing of LED Street light with movable braket at building top of Lighting Technology/Philips/Bajaj or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
4
12812
3203
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
40
1280
32
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
4
8692
2173
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
2
3276
1638
... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of MakeLEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
2
670
335
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
56
7504
134
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.
2
4500
2250
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
2
3380
1690
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of LEGRAND/ Siemens/ Schneider/Havells /ABB/C & S or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
2
5290
2645
... More
(Earthing) INSTALLATION
-
-
-
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
2
5064
2532
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
66
6402
97
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
3
3297
1099
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
1
2850
2850
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3 core x 2.5 sq mm (for small power,street light)
56
4920
87.87
... More
3.5core x 35 sq mm
46
10046
218.41
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
46
6808
148
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x35 sq mm
4
1352
338
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
2
828
414
... More
PANELS
-
-
-
... More
MAIN CONTROL PANEL AT GF
-
-
-
... More
MAIN PANEL
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.
1
86232
86232
... More
EXTINGUISHER SYSTEM
-
-
-
... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )
1
12127
12127
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.
1
5089
5089
... More
SIGNAGE
-
-
-
... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )
4
3600
900
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements