Paradip Port Trust Tender

P.C.C(1:3:6) of using 20mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge.

Cement concrete (1:1.5:3) for RCC works using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge. (Excluding cost of reinforcement steel)

Supply Tor/TMT steel manufactured by SAIL/TISCON/ VIZaG Steel of Fe 500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. NB: No payment shall be made for extra weight than theoretical co-efficient.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

F & P

Wall

Brick work in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes,royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in charge.

12 MM thick Cement plaster with cement mortar (1:6) proportion,over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging,scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding,Excluding GST etc. complete as directed by the Engineer-in-charge.

Supply of 32mm thick single/double leaf seasoned piasal wood with anti termite treated paneled Door shutters having both side styled moulded having bottom rail of 200 mm thick, top rail 100mm thick ,middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats,fixing at position etc all complete . including cost of all materials,labour, loading & unloading Charges,all taxes,transportation charges,stacking at site store,Excluding GST etc. all complete as directed by Engineer In Charge. N.B.- Size & design decided by the department as per requirement at site.

Supplying fitting, fixing fully glazed aluminum framed openable/Sliding windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. including locking arrangement including all fitting including cost of materials all taxes labour, T&P,Excluding GST etc. complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing of M.S. grill gate with cost, conveyance,taxes of all materials, labour, T&P etc. required for the complete in all respect,Excluding GST etc. complete as per direction of Engineer-in-charge.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane ,Excluding GST etc. complete as per direction of Engineer-in-charge.

Filling the gap between aluminium frame & adjecent RCC/Brick work by providing weather silicon sealant by gun of approved quality as per direction of EIC including supply of all material labour T&P taxes stagging etc all complete but excluding GST as directed by EIC .

Supply, fitting and fixing of 110mm dia pvc rain water pipes from roof for better discharge of rain water with supply of all labour , clamp, nails and necessary T&P,scaffolding, taxes, etc. complete as directed by Engineer in charge.(Excluding GST).

Supply, fitting and fixing of 6mm plain/coloured glass of approved quality including supply of screw/nails and removing the old damaged materials/fittings with supply of labour, clamp and nails necessary T&P,scaffolding, taxes,excluding GST etc. complete as directed by Engineer in charge.

Design, development, supplying and fixing of Double sided ( One side Information & other side Site Map) Signboards of size 2.5m x 1.5m made of Micro Prismatic Retro Reflective sheeting DG-3 pasted on 3 mm thick aluminum composite material as per IRC 67-2010, fixing each board with 8 Nos. of SS Mechanical Anchor Bolt of 8mm dia and 100mm long, the front side covered with Retro Reflective sheeting DG-3 with all letters, numerals and pictographs with border as per approved colour scheme including all taxes, transportation, tollage, hire & running charges of all equipments, Port entry fees, taking all safety precautions while installation etc. all complete excluding GST and as per direction of Engineer in charge.

Providing and fixing stainless steel ( Grade 304) Jindal make,Hollow tubes, angles, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, etc fixing the board with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including all fixing accessories such as nuts,bolts, fasteners etc.).etc. with including cost of conveyance, all materials, labour, T&P, taxes etc.Excluding GST all complete as per direction of Engineer-in-charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre,horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen,excluding GST etc. complete as per directions and approval of Engineering-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Painting two coat with acrylic base plastic emulsion paint with one coat primer of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging,scaffolding, etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Exterior painting two coats to wall surface with acrylic based weather coat paint with one coat primer of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge.

Supplying, transporting, fabrication of GI pipe of required size, welding, fixing the pipes as per required profile with supply of all material, taxes, T&P, gate entry fees, all safety arrangements etc. complete excluding GST and as per direction of Engineer in charge.

100 mm dia. GI Pipe medium quality conforming to IS-1239, part - 1 (2004)

50 mm dia. GI Pipemedium quality conforming to IS-1239, part - 1 (2004)

Painting two coats with approved quality & shade enamel paint onnew iron work over one coat of red oxide primer including scraping,cleaning, the old paint surface sand papering, filling the holes with waxputty etc. all complete including cost and supply of all materials, labour,T&P, all taxes, transportation charges, staging, scaffolding, etc. allcomplete but excluding cost of GST as per direction of Engineer-incharge.

Supplying, fitting & fixing of precoated Galvolume metal sheet or itsequivalent of 1000 mm width with total coated thickness of 0.5mm. forroof approved quality, drilling hole fixing of wind tie and ridges orvalley including supply of all EPDM screw, ridge pieces, eve board, windties, cutting the sheet to proper profile with supply of all materials,labour, transportation, loading and unloading at both ends, T&P, etc. allcomplete as per the direction of Engineer-in-charge (Excluding cost ofGST).

Providing and laying factory made chamfered edged cement concrete paver blocks in footpath, park lawn, drive way or light traffic parking etc. M30 strength and 80 mm thick ,made by table vibratory method using PU mould , laid in required colour & parten over 50 mm thick compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer throught vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour , t&P taxes tollage etc all complete but excluding GST as directed by EIC

Filling in foundation and plinth with sweet sand including watering and ramming but excluding cost of GST as directed by the Engineer-in-charge

Providing, laying, spreading and compacting stone aggregates of IRC Gr I(90 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Providing, laying, spreading and compacting stone aggregates of IRC Gr II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Construction of dry lean cement concrete subbase over a preapred subgrade with coarse and fine aggregate confirming to IS:383, the size of coarse aggregate not exceeding 25mm., aggregate cement ration not to exceed 15:1, aggregate gradation after blending to be as per table 600.1, cement content not to be less than 150Kg./Cum., optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10MPA at 7 days, mixed in a batcking plant, transported to site, laid and compacting with vibratory roller 8 to 10 ton capacity , finshing and curing as per clause 601 of MoSRT&H specification for road & bridge works (4th revision) as directed by EIC(Excluding GST).

Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc., complete including cost of all materials,labour, T&P, tollage, taxes excluding GSTetc, all complete as directed by the Engineer In Chrage. (N.B. : No payment will be made for overlapping.)

Cement concrete of M-30 grade of PQC by using Crusher broken hard granite chips of 12mm to 20 mm size of approved quality for RCC road work, mixing in a Batching plant, transporting the concrete by any approved means, hoisting, laying on road pavement slabs in panels of required size, providing thermocol at top 50 mm of the panel joints so as to create a gap of 12mm between panels, compacting by mechanical vibrator with 60mm needle vibrator, finished smooth to the exposed surface to proper grade and camber, texturing the top surface by brooming with wire brush, curing by ponding, barricading the area for proper safety of the fresh concrete without obstructing the traffic, etc with supply of all materials, labour, T&P, tollage, all transportation charges, engagement, hire & running charges of all machineries, taxes excluding GST and excluding cost of formwork, cost of joints, cost of steel & labour charges for bending & binding of steel etc all complete as directed by Engineer in Charge. (N.B. : 1)Two separate Mix Design shall be conducted with different Cement brand for RCC work & Barricading the site if required.2)material testing cost borne by contractor.)without Pavor sensor

Supplying & forming 12mm wide x 85mm deep longitudional joints by fixing 12 mm dia 640mm long HYSD bars @ 450mm C/C painted 50mm at center with anti-corrosive paint including providing & fixing bitumen paper, painting one side of concrete surface (250mm thick) with bituminous black paint, cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials, reinforcement, T&P, labour, Hire and running charges of all machineries, safety measures, taxes excluding GST etc., all complete as directed by Engineer-In-Charge.

Supplying & forming 12mm wide x 60mm deep contraction joints by fixing 32 mm dia 450mm long mild steel round bars @ 300mm C/C including painting two third of the bars with anticorrosive paint & covering the same with 125 micron polythene fitted & cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes excluding GST etc. all complete as directed by Engineer-In-Charge.