Panchayati Raj And Drinking Water Department Tender

Fly Ash Brick Masonary cement mortar (1:6) having crushing strength not less than 75.00 Kg/cm2 immerging the bricks in water not less than six hours with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. Ground Floor( F&PL )

Fly Ash Brick Masonarycement mortar (1:6) having crushing strength not less than 75.00 Kg/cm2 immerging the bricks in water not less than six hours with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. Ground Floor (SUPER STRUCTURE)

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete A) Column footing

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete B) Column upto PB

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete C) Grade Beam

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete D) Lintel Band

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete E) Column upto Roof level

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying etc complete & as per direction of Engineer-in- charge and including centering and shuttering rates F) Beam

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete G) Chajja

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete etc & as per direction of Engineer-in- charge and including cost of centering and shuttering etc complete H) Roof Slab

Labour charges for cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge with cost of TATA TISCON/SAIL steel rod and as per drawing, design and direction of Engineer-in-charge.

12mm thick cement Plaster in CM (1:6) over brick work including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge.

16mm thick cement plster (1:6) over Brick work including racking out joints finishing smooth with proper plumb and line curing for proper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc. comp.and as per direction of Engineer-in-charge.

Cement concrete (1:4:8) with 4 cm. Down grade size crusher broken hard granite metal including laying in layers not exceeding 300 mm in depth, ramming, compacting to proper thickness, watering, curing for proper period with cost conveyance, royality taxes of all materials & labours and T & P required for the work etc. complete and as per direction of Engineer-in-charge.

Supplying, fitting and fixing Kota tile in floors & Dadoos of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand ) and filling joints with white cement of approved quality including cost of all materials , labour T & P etc required for the work all complete as per direction of Engineer-in Charge.

Supplying fitting fixing supplying fixed M.S steel and put up for frames of Doors and windows complete including painting one coat primer & fixing in position with cost conveyance, royality taxes of all materials & labours and T & P required for the work etc. complete and as per direction of Engineer-in-charge.

Painting two coats of enamel paint over a coat of Priming including all costs of labour, Paint, Primer, brushes and putty required for the work etc. complete and as per direction of Engineer-in-charge.

Wall painting 2 coats with Weather Seal Coat paint over a coat of water bound wall primer of approved shade on new work to give an even shade Inculding cost of material etc. complete and as per direction of Engineer-in-charge.

Distempering 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. and as per direction of Engineer-in-charge.

Provision For Display Board

Provision For Black/ Green Board of Size- 8'0" x 4'0"

Recessed wiring to light point in 18mm dia non metallic flexible polythene conduit conforming to IS-694/1973 WITH 1sq mm PVC insulated ,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switch board &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS¬3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections.(V.Guard/L&T/Anchor/Havells) A) Group-A

Recessed wiring to light point in 18mm dia non metallic flexible polythene conduit conforming to IS-694/1973 WITH 1sq mm PVC insulated ,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switch board &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS¬3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections.(V.Guard/L&T/Anchor/Havells) A) Group-B

Recessed wiring to light point in 18mm dia non metallic flexible polythene conduit conforming to IS-694/1973 WITH 1sq mm PVC insulated ,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switch board &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS¬3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections.(V.Guard/L&T/Anchor/Havells) A) Group-C

Recessed wiring to 3pin plug point in 2.5sqmm 1.1 KV PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switch board &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS­3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections.

Recessed wiring to sub main with V PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 in 20/25mm dia non metallic PVC condiut heavy duty conforming to IS-6946/1973 & earth continuity in 2.24mm dia HDBCwire from lighting distribution board to switch board complete with all accessories and connections (Finolex/Anchor) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm

Recessed wiring to sub main with V PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 in 20/25mm dia non metallic PVC condiut heavy duty conforming to IS-6946/1973 & earth continuity in 2.24mm dia HDBCwire from lighting distribution board to switch board complete with all accessories and connections (Finolex/Anchor) 2 x 2.5 sq.mm + 1 x 1.5 sq.mm

Recessed wiring to sub main with V PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 in 20/25mm dia non metallic PVC condiut heavy duty conforming to IS-6946/1973 & earth continuity in 2.24mm dia HDBCwire from lighting distribution board to switch board complete with all accessories and connections (Finolex/Anchor) 2 x 4.0 sq.mm + 1 x 1.5 sq.mm

S/F of BK Angle holder

Supply, installing, Testing and commissioning of celling fan 1200 mm sweep 230/250 volts 50HZ complete with suitable,clamp,down rods blades canpoy,rubber,shaackel capacitor,regulator and connections with 1.5 sqmm PVc insulated copper conductor cable etc,as required and fan hooks made of 16mm M.S rods in RCC roof complete with all accessories.(Bajaj,orient,crompton)

Supplyng and fixing of 9" size Ceiling fan of approved make with holding down frame Etc. all complete as per drawing,specification and direction of EIC(Bajaj,orient,crompton)

Supplyng and fixing of 9Watt LED Bulb of approved make with holding down frame etc. all complete as per drawing, specification and direction of EIC(Bajaj,orient,crompton)

Supply,fixing and fitting of 1x20 watt 4' long flouroscent tube light fitting (Patti Type) on wall surface complete with 1no of20watt tube of approved make complete with all necessary fixing materials including termination and labour etc as per the EIC (make,philips,bajaj/crompton or equivelent)

Supply&fixing of4 way phase distribution board conforming to IS-5133/part-I/1969 with 1 nos 40 amp DPMCB incoming &6 nos Minature 6/10/16 Amps circuit Breaker of ISI marked conforming to IS 13032/1991 in sheet steel enclosure along with busbar ,neutral link,earth bar,din rail and mettalick board complete with all acesseries and connections.

Supply&fixing of B Series SP MCB(Havels,HPL,Anchor)

Supplyng and fixing of 32A DP Main switch (HPL/Anchor)etc. all complete as per drawing, specification and direction of EIC

S/F of standard earthing conforming to IS -3043/1987 including supply and fixing of 38mm /40mm dia heavy duty G.I pipe 3mtrs long conforming to IS 1239 part-I/1990 .The pipe shall have 12mm dia perforated holes at 15cm interval centre to centre up to 2.5 mtrs height from bottom upper end threade and fited with 38mmto40mm dia GI flange with provision of hole for making connection of earth continuity wire ,complete with masonary works ,for earth pit chamber and S/F of CI hinged top cover 30cmx30cmx1cm size. Excavation of earth pit of size 0.75mtrsx0.75mtrs x3mtrs.The earth pit shall have an alternate layer of 105mm charcoal and 50mm salt at 150mm radious around earth electrode up to a depth of 465mm from bottom and the rest shall be filled with homogenious layer of salt,sand and charcoal to a further depth of 2035mm and balance portion by surplus earth No 8 SWG/4.06 mm dia HDBC wire .run inside the wall at a depth of 50mm by cutting the wall surface and plaster the cutting portion of the wall after laying the wires as earth conduit conductor main switch to earth electrod .both end of the earth wire should be provided with copper cable socket duly solderded and fixed G.I nut & bolts.

S/L of No8 SWG Copper wire