Orissa Agro Industries Corporation Limited Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Orissa Agro Industries Corporation Limited - OAIC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Feb 2025
Closing Date15 Feb 2025
Tender Amount₹ 6,91,93,946
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender includes Super Class, Special Class, and 'A' Class contractors. Additionally, bidders must be 'A' Class & Special Class contractors registered with the State Governments and contractors of equivalent Grade / class registered with Central Government / MES / Railways.
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value is related to the price adjustment due to changes in minimum wages for labor and prices of Petrol, Oil, and Lubricants. The formula to calculate the increase or decrease in the price of labor is:
VI = 0.75 x PL x R x (I - I0) / 100 Where:
VI = Increase or decrease in the cost of work during the quarter under consideration due to changes in the minimum wages rate of labor.
R = The value of work done in Rupees during the quarter under consideration.
I0 = The minimum wages for labor as prevailed during the quarter under consideration in which the tender was opened.
I = The minimum wages for labor prevailed during the quarter under consideration.
PL = Percentage of labor component. Additionally, the price adjustment for Petrol, Oil, and Lubricants (with Diesel oil as the representative item) is also mentioned, with the formula:
Kl = 0.75 × K x R (D2 - D1) Where, Kl = Increase or decrease in the cost of work during the quarter under consideration due to changes in the price of P.O.L. R = The value of work done in Rupees during the quarter under consideration. D1 = Average Price per liter of diesel oil which was fixed by the Government of India during the quarter in which the tender was opened. D2 = Average Price per liter of diesel oil which is fixed during the quarter under consideration. K = Percentage of P.O.L. component. The percentage of materials, labour and P.O.L. component for reimbursement / refund on variation in price of material, labour and P.O.L. is given as:
- Building works: 30% for materials, 30% for labour, 5% for P.O.L. (or 20% for materials if brick is supplied by the Department).
- Other works: Not specified. The bid capacity required can also be formulated as:
- Minimum 60% of the tender value in a single work
- OR
- Total tender value in cumulative, during the last 3 years.
Technical Capacity
... View More
The required prior work experience for the bidder includes the execution of similar nature of projects. The bidder needs to provide a list of similar projects executed, including the name of the employer, location and name of work, contract price in Indian Rupees, items of works, date of starting and completion of work, and reasons for delay, if any. Additionally, the bidder needs to provide a list of similar projects in progress, including the name of the employer, location and name of work, contract price in Indian Rupees, items of works, date of starting and stipulated date of completion of work, revised target date of completion, and reasons for slow progress, if any. The contract price for civil works needs to be mentioned clearly. The bidder's experience and competency in executing similar projects will be evaluated. No specific value or percentage of similar works completed is mentioned. The bidder is required to have prior work experience in projects similar to the proposed work, and needs to provide information about their works experience, including a list of projects executed and in progress that are similar in nature to the work.
Costs
EMD
₹ 6,91,940Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_OAICL_110126_1Bid Award Id
ViewTender No
MD_OAIC_52_E_I_2024-25Tender Authority
Orissa Agro Industries Corporation Limited ViewPurchaser Address
-Website
http://https://www.orissaagro.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
498.83
130
65197.08
... More
DISPOSAL OF MATERIAL :- Disposal of building rubbish/ malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping site or as approved /directed by Engineer-in-charge, including all lead and lifts involved, labour, etc. including all taxes as per the direction of Engineer-in-charge.
249.42
278
69538.3
... More
SAND FILLING :- Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
662.81
509
337741.46
... More
P.C.C (1:3:6) :- Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness, watering & curing for the required period. including all cost of labour ,material, conveyance, royalties and , sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
250.76
6045
1515869.28
... More
BELOW PLINTH BRICK WORK :- Flyash Brick Masonry in cement mortar of mix (1:6) using Flyash bricks of size 23 c.m x 11 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the Flyash bricks for 6 (Six) hours in water before use in works such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, stacking, loading, unloading, royalties and of all materials,cost of all labour, scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
101.39
5469
554552.61
... More
Providing & applying of pre constructional anti-termite treatment Confirming to IS 6313 (Part-II) and creating chemical barrier under and around the column pits, wall trenches, basement excavation top surface of plinth filling, junction of wall and floors along with external perimeters of building, expansion joints, surrounding the pipes and conducts etc. at the rate at 7,5 liter per sqm on vertical surface and 5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials, labour, conveyance, T&P , all taxes and hire charges of machinaries as per direction. Treatment at Junction of the inner wall and the floor ,Treatment of Top Surface of Plinth Filling , External Perimeter of building. (Make :- HI-Solution or Smart Care )
2100.16
110
231857.66
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works as per IS Specification, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but excluding cost of Reinforcement and Binding wires etc.
-
-
-
... More
UP TO PLINTH
-
-
-
... More
Footing
117.71
6883
810197.93
... More
Column
19.25
16015
308300.3
... More
plinth Beam
93.28
7750
722957.31
... More
GROUND FLOOR
-
-
-
... More
Column
49.23
16015
788447.99
... More
Roof Beam
103.26
16015
1653770.86
... More
Roof Slab
226.39
14068
3184877.16
... More
Slope roof
52.46
15367
806152.82
... More
Lintel & Sill
17.14
14505
248625.98
... More
Staircase
20.86
15888
331434.11
... More
FIRST FLOOR
-
-
-
... More
Column
18.79
17922
336767.53
... More
Roof Beam
20.28
17922
363472.36
... More
Roof Slab
16.59
15608
258948.33
... More
Double stage centering
37.86
22358
846492.81
... More
REINFORCEMENT :- Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars, stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
-
-
-
... More
UP TO PLINTH
262.85
9357
2459592.59
... More
GROUND FLOOR
575.02
9324
5361946.5
... More
FIRST FLOOR
86.92
9357
813345.21
... More
230 MM FLYASH BRICK WORK :- Fly ash Brick Masonry in cement mortar of mix (1:6) using Fly ash bricks of size 23 c.m x 11 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the Flyash bricks for 6 (Six) hours in water before use in works such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, stacking, loading, unloading, royalties and of all materials,cost of all labour,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
266.18
5507
1466066.2
... More
FIRST FLOOR
84.83
5882
499037.92
... More
115MM FLYASH BRICK WORK :- Flyash Brick Masonry for 115 mm width brick masonry wall in cement mortar of mix (1:4) using Flyash bricks of size 23 c.m x 11 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m with provision of 2 ( Two nos ) of 8 m.m dia M.S. Round Reinforcement Bars at each 4th layers) with cement and screened & washed sharp river sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works in superstructure and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, stacking, royalties and of all materials ,cost of all labour, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
29.7
5993
177998.04
... More
12MM THICK CEMENT PLASTER (1:6) :- Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) with mixing of water proofing compound etc. including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
1157.32
182
210979.44
... More
FIRST FLOOR
368.83
186
68934.33
... More
16MM THICK CEMENT PLASTER (1:6) :- Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) with mixing of water proofing compound etc. including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
1157.32
263
305416.75
... More
FIRST FLOOR
371.28
275
102213.38
... More
12MM THICK CEMENT PLASTER (1:4) :- Providing 12mm thick cement plaster in cement mortar (1:4) with mixing of water proofing compound to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finisjing the plaster surface smooth using wooden floats ,bars, etc only to proper plumbs and level making grooves, beads and drip courses to give required ornamental finish as per the drawings including cost of all materials, conveyance, loading and unloading ,royalties, cost of all labours ,materials, scaffolding ,watering & curing, sundries, T&P etc. complete as per the direction of Engineer-in-charge .
-
-
-
... More
GROUND FLOOR
258.25
194
50203.8
... More
6MM THICK CEMENT PLASTER (1:4) :- Providing 6mm thick cement plaster with cement mortar of (1:4) with mixing of water proofing compound to RCC surface of roof slabs ceilings , stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
3787.75
205
779897.73
... More
FIRST FLOOR
794.99
211
167981.39
... More
Pipe/Bore Packing Treatment : Providing and treating pipes/bore packing by applying an epoxy bonding agent over the PVC and internal side of concrete after rubbing it with emery paper/sand paper and Later Filling the pipe gap with Armgrout 65 (E) /Equivalent from the top all over the periphery, leaving 20mm deep gap from top, with all shuttering already in place. Later after curing of Arm grout M 65 (E)/Equivalent , the gap shall be filled with an epoxy mortar, all complete as per approved methodology. (Upto 110mm Dia).
-
-
-
... More
Water proofing work on Terrace Area:
-
-
-
... More
Surface Preparation: Surface Preparation shall be done by using blower machine to remove all cement laitance, friable concrete, loose mortar to acheive CSP3 type profile for mechanical keys . If any part of the floor is contaminated by grease, oil, solvent etc. shall be removed before preparation is undertaken. Opening of cracks & cold joints if any by groove cutter machine/manual preparation as per site requirement. Any visible minor surface/shrinkage cracks shall be cleaned and later filled with epoxy putty.
-
-
-
... More
Construction Joint & Honeycombing Treatment: Chase open construction joints in v shape of 15mm x 15mm using suitable means. Later fix the drill and fix 12 mm dia, 50-75 mm long PVC or equivalent injection packers at approved spacing as per methodology , in cleaned holes. Later cleaning the groove using water jet and applying a bond coat of SBR45 /Equivalent mixed with cement and water in a ratio of 1:1:3 (Water : Polymer : Cement), followed by filling with the repair mortar, including, filling, finishing, curing all complete, as per the direction of manufacture technical team. Later carrying out cementitious injection grouting in the prefixed nozzles, using plasticised expanding grout admixture cementitious grouts. Later the nozzles shall be cut and space shall be refilled with the PMM mortar
-
-
-
... More
Coving: All wall-floor, wall-wall corners shall be provided with coving of size 50mm * 50mm or as per site condition made using SBR latex /Equivalent admixed PMM .
-
-
-
... More
Waterproofing coating: Providing and applying waterproofing treatment to sound, moisture free concrete surface with Aqua Arm SPU SPL./Equivalent Well cleaned, dry and levelled concrete surface shall be primed with Aqua Arm Primer PUDC /Equivalent @ 200-250 gms/Sqm and later followed by application of waterproofing coating @ recommended consumption of 2.7 kg/sqm for total system thickness of 1.5mm in two coats using Roller, all complete as per manufacturer's methodology.
-
-
-
... More
Membrane Termination shall be done at 300 mm above FFL or as per site conditions using 8mm * 8mm groove and filling with PU sealant,.
-
-
-
... More
Payment shall be made as per actual area of measurement.
-
-
-
... More
For vertical exposed areas, where plastering is to be done, approved silica sand shall be sprinkled over the tacky final coat of sealer coat on vertical surface. Later after final curing, plastering should be done.
-
-
-
... More
The membrane formed shall confirm to following minimum properties:
-
-
-
... More
1) Solid Content : 90%
-
-
-
... More
2) Tensile strength : 2 Mpa
-
-
-
... More
3) Elongation at break : 500 %
-
-
-
... More
4) Crack Bridging ability 2 mm
-
-
-
... More
Work shall be carried out by manufacturer's authorised applicator as per manufacturer's methodology.
-
-
-
... More
Geo textile: Providing and installing 150 GSM non-woven geo textile membrane over the finished waterproofing over the horizontal area maintaining overlaps of geo textile. prior to protection screed.
-
-
-
... More
The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation etc. complete as per design, drawing & ,specification and instructions of EIC.
1649.72
1044
1722637.62
... More
TERRACE GRADING CONCRETE :- Providing average 40mm thick grading Concrete with (1:2:4) using 12mm & down graded size black hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge.
1649.72
820
1353100.34
... More
TOILET WATER PROOFING :- Aqua Arm UM Waterproofing application: - Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm The membrane should have Elongation equal or more than: 60%
-
-
-
... More
Crack Bridging ability: Up to 1 mm
-
-
-
... More
Adhesive strength: 1.0 N/mm² @ 28d
-
-
-
... More
Tensile elongation: 30% @ 20°C
-
-
-
... More
Shore A Hardness 85 (between 3 - 7 days)
-
-
-
... More
etc. as per direction of E.I.C
-
-
-
... More
The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation etc. complete as per design, drawing & instructions of EIC.
263.38
542
142857.31
... More
VITRIFIED TILE FLOORING :- Providing and fixing Vitrified tile of specified size in floors on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) with neat cement slurry . finishing the joint with epoxy based water proof grout to match the shades of the tiles, including 3 mm width or required spacer etc. including cost of all materials ,labours, taxes & royalties, conveyance, loading and unloading ,sundries , T&P etc . complete as per the specification & direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use)
-
-
-
... More
SIZE OF TILE (600 x 1200 ) (Full Body Double charge Vitrified tiles)
-
-
-
... More
GROUND FLOOR
231.34
1624
375834.96
... More
FIRST FLOOR
231.34
1637
378888.65
... More
SIZE OF TILE (600 x 1200 ) (Heavy duty Vitrified tiles)
-
-
-
... More
GROUND FLOOR
649.66
1638
1064402.94
... More
SIZE OF TILE (300 x 300 ) (EXTERIOR GRADE VITRIFIED TILE FLOORING)
-
-
-
... More
GROUND FLOOR
742.2
1432
1063349.94
... More
VETRIFIED TILE SKIRTING:- Providing & laying vitrified tile of specified size in skirting cut from approved make confirming to I.S.-15622 specification over 12 mm thick cement plaster 1:3 C.M. to proper line & level to a height as per design including cost of all material labour taxes conveyance Royalties T7n P etc. all complete as per the direction of EIC.
-
-
-
... More
SIZE OF TILE (600 x 1200 ) (Full Body Vitrified tiles)
8.88
1756
15595.94
... More
SIZE OF TILE (600 x 1200 ) (Heavy duty Vitrified tiles)
43.94
1770
77778.19
... More
SIZE OF TILE (300 x 300 ) (EXTERIOR GRADE VITRIFIED TILE FLOORING)
19.36
1482
28701.2
... More
VITRIFIED TILE FLOORING FOR TOILET:- Providing & laying best quality Vitrified floor tile of specified size of thickness 6-10mm of approved make confirming to IS-15622 specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. (Toilet) (Note- Sample of tiles shall be approved before procurement and use) SIZE OF TILE (600 x 1200 )
105.81
1495
158228.27
... More
CERAMIC GLAZED WALL TILE FOR TOILET:- Providing and fixing ceramic glazed wall tiles of specified size of thickness 6-10mm conforming to IS: 15622 specifications of approved make and shade, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and finishing the joint with epoxy based water proofing grout to match the shade. All complete as per the direction of Engineer-in-charge (Toilet) (Note- Sample of tiles shall be approved before procurement and use)
261.2
1439
376049.64
... More
GRANITE FLOORING :- Providing & laying Flame finish granite in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, taxes, materials, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge.
124.32
2781
345771.22
... More
GRANITE SKIRTING :- Providing & laying granite in Skirting using 16-18 mm thick granite slab of approved quality, colour and size over 12 thick cement mortar (1:3) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge.
12.37
2926
36194.62
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. ( Area of slab over 0.50 sqm)
48.27
3317
160155.03
... More
KOTA STONE FLOORING :- Providing & laying Kota stone slab flooring of 16mm (average) thick over a 20mm thick based of cement mortar 1:4 to a proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the colour and shade of the flooring complete as per the design and drawings. Including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, T & P etc. All complete as per drawing and direction of the Engineer -in-charge.
18.04
1254
22622.16
... More
KOTA STONE SKIRTING:- Providing & fixing Kota stone in skirting using 16mm thick Kota stone of approved quality, colour and size over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed and finishing the joint with epoxy based water proof grout to match the colour & shade of stone including cutting to a proper shape and size, Including cost of all labour, materials royalties, loading and unloading, conveyance, sundries, watering and curing etc. All complete as per drawing and direction of the Engineer -in-charge.
3.29
1525
5019.55
... More
Artificial grass flooring
233
1387
323240.9
... More
STAINLESS STEEL STRIP :- Providing and fixing stainless steel strips of 3-6 mm for floor border etc. including cost of all labour material, sundries T&P etc all complete as per the direction of Engineer-in-charge.
20
220
4400
... More
ROLLING SHUTTER :- Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
20.16
2769
55830.3
... More
M.S GRILLS FOR WINDOW :- Supplying, Fitting and Fixing M.S Grills of approved designs made out of M S Flat, Square bars/Round bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures including cost, conveyance, loading, unloading, stacking, of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
585.4
58
34070.28
... More
MS RAILING FOR STAIRCASE & BALCONY :- Providing and fixing MS hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, is per approved design and specification including buffing, polishing, painting with enamel paint with adequate primer etc with cost ,conveyance of all materials, labours, hardner and fixture ,screws, T&P etc complete in all respect as per the direction of Engineer-in-charge.
703.63
141
99275.16
... More
SYNTHETIC ENAMEL PAINT :- Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work of wood /steel over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
112.86
259
29321.03
... More
PUTTY WORK :- Finishing surface of walls with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of scaffoding staging charges with cost of all materials,taxes,labour T&P etc complete as per the direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
5203.32
73
384005.02
... More
FIRST FLOOR
1163.82
75
88101.17
... More
Providing and applying 2 coats of Plastic Emulsion Paint of approved quality and shade over wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats,including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
GROUND FLOOR
5203.32
187
977703.83
... More
FIRST FLOOR
1163.82
192
223453.44
... More
WEATHER COAT PAINT :- Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat (Two or more coats ) of exterior primer applied @ 0.90 litre/10 sqm.
-
-
-
... More
GROUND FLOOR
1157.32
179
207970.4
... More
FIRST FLOOR
371.28
186
69243.72
... More
TEXTURED PAINT :- Providing Two coat of Textured paint of approved make, quality and shade over the wall surface of the building over (Two or more coats ) of primer of approved make including cost of material, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
GROUND FLOOR
578.66
157
91023.22
... More
FIRST FLOOR
185.64
157
29201.17
... More
Supplying,fitting,fixing and installing of Sand stone mural as per the approved design and specified size approved by the authorized agency etc.including cost of all labour,material,Tools and plant ,equipment,scaffolding ,all lead and lift as per the direction of Engineer-in-charge..
10.8
28750
310500
... More
G.R.C JALLI :- Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S Urban stone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.
111.53
4900
546497
... More
EXTERIOR BRICK CLADDING :- Supplying and fixing of MCM Modified Clay Material ‐ MCM K Series Bricks of PHOMI or VANJOIN make, sizes of 225x60mm, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.
-
-
-
... More
GROUND FLOOR
278.99
3159
881357.31
... More
FIRST FLOOR
144.95
3159
457911.55
... More
EXTERIOR MCM CLADDING :- Supply of MCM Modified Clay Material - MCM R Series Brick - 222 x 63 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15.
-
-
-
... More
The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
-
-
-
... More
GROUND FLOOR
60.48
4036
244103.33
... More
MANGALORE TILE :- Dry fixing of the Clay Roof tile Design & fixing of ROMAN roof tile of Wienerberger / BMI MONIER /SHIVAYA with suitable support with either Cement battons with dimensions 2.5 inch length * 2 inch or MS or Aluminum purlins for the tile to rest on the given structure. Purlins should be placed as per the Wienerberger /Monier Specifications for that particular tile, every 3rd tile should be screwed with the self Tapping screw to the purlin to ensure the tile wont uplift in case of heavy wind loads. (Consider 12.5 tiles required Per SqM excluding Wastage) On fixing of first tile from the bottom, it need to be taken out by 2-3inches & the tiles should be placed one over the other as per the
-
-
-
... More
interlocking of the tile as per Wienerberger methods. Necessary
-
-
-
... More
Flashings (for abutments) & other RSC (Ridge Tree, Ridge Rolls & valley sheets) material should be used to make the entire roof Water proof. Prices should include all the necessary components & laying charges on SqM basis depending on the design & equirements of the roof given by the Architect
-
-
-
... More
TILE
-
-
-
... More
GROUND FLOOR
254.18
2575
654538.92
... More
RIDGE COVER
-
-
-
... More
GROUND FLOOR
26
1995
51883
... More
NFC EVES border 150mm
-
-
-
... More
GROUND FLOOR
283.5
572
162332.1
... More
Brick masonry work using Exposed Wire cut brick of size( 230x115x80) mm strength not less than 75kg/sqcm in cement mortar (1:3) as per the direction of Engineer in charge
-
-
-
... More
GROUND FLOOR
78.73
10930
860581.88
... More
PLAIN GYPSUM CEILING :- Providing fitting and fixing of false ceiling with aluminium anodised T section No - 3215 with 2'-0" centre to centre , l section No -1705 up to 15 micron on 4 walls to be fixed by means of steel screw and pvc plug and aluminium grid 2'-0"x2'-0" with 12. 5 mm th gypsum board suspended from ceiling etc complete excluding gst . The rate shall be exclusive of trap door which shall be paid for separately. including all cost of materials , labour, overheads T & P etc.
-
-
-
... More
GROUND FLOOR
1234.7
892
1102340.16
... More
FIRST FLOOR
124
902
111860.4
... More
PAINTING ON PLAIN CEILING :- Providing and applying two coats of Plastic Emulsion Paint of approved quality and shade over a coat of putty & primer of approved quality to surfaces (interior) including thoroughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurement & use).
-
-
-
... More
GROUND FLOOR
1234.7
265
327442.44
... More
FIRST FLOOR
124
271
33616.4
... More
ACCOUSTIC GRID CEILING:-Supply and Installation of Anutone 15 mm glass fibre square edge tiles having the technical parameters are as follows : Core – Glass fibre, Fire – Class 1 & P, Acoustics – NRC 0.90,Climate (degree C RH) – 40, 95, Light reflectance 85 %,Green (RC %) – 35, Hygiene (VoC, Clean room) – Low , fully encapsulated for zero erosion of particulate matter from all side fully encapsulated tile of size 595 x 595 x 15 mm having density 120 Kgs/ m3, weight - 1.8 kg/m2 which will be suspended from main ceiling by using 0.4 mm wire thick and the help of T 24 channels whose thickness will be for main T- 24 x 38 x 0.3 x 3600 , cross T - 24 x 25 x 0.3 x 1200 mm , Cross T - 24 x 25 x 0.3 x 600 mm & wall angel of size - 24 x 24 x 0.4 x 3000 mm pre coated metal . The grid system of 600 x 600 mm module shall be maintained for laying Anuton tiles. Now ,Anuton Glass fibre square edge tiles of size 595 x 595 x 15 mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind glass fibre square panels are oriented in one direction to achieve uniform looks. Test certificate of the use products shall be submitted after procurement of materials. including cost of all labours, materials, conveyance, fixing & fitting ,loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
3.64
3345
12176.53
... More
WOODEN FALSE CEILING WITH LAMINATE :-Providing and fixing of wooden false ceiling with 19 mm bwp PLY frame work and then fixing 6 mm thick bwp ply to it over which is finished with 1 mm th SUEDE /TEXTURE laminate & fixed by means of stainless steel sturds & polished with melamine including all the cost of material & labour , t&p etc complete and as per the direction of EIC /ARCHITECT .
-
-
-
... More
GROUND FLOOR
147.84
8815
1303283.52
... More
LAMINATED WOODEN RAFTER FALSE CEILING:- Providing and fixing of wooden rafter false ceiling of size maximum upto 50 x125mm made out of with 19 mm bwp PLY frame work and then fixing 6 mm th bwp ply to it over which is finished with 1 mm th SUEDE / TEXTURE laminate & fixed by means of stainless steel sturds including all the cost of material & labour, t&p etc complete and as per the direction of EIC / ARCHITECT. excluding GST .
-
-
-
... More
GROUND FLOOR
240
2082
499680
... More
METAL BAFFEL CEILING WITH BAMBOO FINISH :- Supply & Installation of Metal works Baffle (Ceiling) /equivalent - 25*100*3600 in Red Oak/Cherry with 100/125/150 On Centre Spacing with Accessories etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
144.66
14925
2159093.9
... More
HEXEGONAL/ ANY SHAPE BAFFLE :- Supply & Installation of Sounds capes Shapes of 30 mm thickness & outer dimension 1200x1200 mm with Deck Hanging Kit etc. including cost of all labours, materials, conveyance, fixing & fitting ,loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst .
-
-
-
... More
GROUND FLOOR
15
16261
243915
... More
GRID CEILING FOR TOILET :- Providing and fixing false ceiling at all height with integral densified ICD bioguard caclium silicate reinforced with fiber and natural filler with bioguard coating false ceiling size 595x595 mm, of approved tecture design and pattern having acoustical NRC 0.50 as per IAS8225.1987, Light reflection 85% minimum non combustible as per BS: 476 (part4) , fire performance as per BS:476 (part 6 &7) , humidity resistant pf 100% thermal conductivity /0.043W/ MK as per ASTMS 18:1991 in true horizontal level suspended on interlocking metal T grade of hot dipped galvanized iron section 0.33mm thick galvanized @120mg per sqm. Including both side comprising of main tee runner size 24x38mm of 3mtr, cross tee size 24x32x1.200 and other cross tee 0.600mtr structure . The rate shall be including all cost of materials , labour, overheads T & P etc., complete. as per the detail design and specification approved by Engineer -in-charge /Architect .
-
-
-
... More
GROUND FLOOR
105.04
3089
324531.58
... More
GRID CEILING FOR PANTRY & KITCHEN :- Supply & Installation of Ultima Beveled Tegular Mineral Fibre Ceiling /equivalent using Ultima Beveled Tegular Mineral Fiber Ceiling Tiles of size 600x600x19mm, NRC-0.70 with Silhouette Grid 15x38 mm wall angle 19x19mm and Armstrong Suspension system. Etc etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst
-
-
-
... More
GROUND FLOOR
46.97
1893
88928.3
... More
WOODEN PANELING WITH LAMINATE :- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick WPC, ply finished with 1 mm thick texture / suede laminate complete with necessary Hardwood, skirting , mouldings & teak wood beading on the edge etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete. The exposed frame work shall be finished with matt finish enamel paints / polish with mellamine to match with the shade of the Laminates. excluding gst .
-
-
-
... More
GROUND FLOOR
43.84
5263
230729.92
... More
MCM CLADDING :- Supplying and fixing of MCM Modified Clay Material ‐ MCM Stone of PHOMI or VANJOIN make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.
-
-
-
... More
GROUND FLOOR
95.63
4811
460142.87
... More
BRICK CLADDING :- Supplying and fixing of MCM Modified Clay Material ‐ MCM K Series Bricks of PHOMI or VANJOIN make, sizes of 225x60mm, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/ M.K EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.
-
-
-
... More
GROUND FLOOR
92.49
2998
277340.51
... More
FLUTED PANEL :- Fluted panels are characterized by their vertically grooved or ribbed surface. They can be made from various materials such as wood, WPC. Panel Size: Customizable, Flute Width: Typically ranges from 10mm to 50mm , Flute Depth: Typically ranges from 5mm to 20mm , Spacing Between Flutes: Varies based on design, commonly 5mm to 20mm , Finish Options - Natural Wood Finish: Varnished, stained, or lacquered / Painted: Matte, satin, or gloss finish in any color / Laminate: High-pressure laminate in various patterns and textures. Installation - Mounting: Directly on walls using adhesives or mechanical fasteners , Low VOC emissions . Patterns: Custom flute patterns and spacing available upon request , Colors: Custom colors and finishes to match design requirements as per the directions of the EIC/Architect.
-
-
-
... More
GROUND FLOOR
97.33
2083
202738.39
... More
35MM THICK FLUSH DOOR :- Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS :2202 (PART-1) decorative type core of block board construction with frame of first class hardwood and well teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design. including cost of all labour, cost of all door fittings and fixtures etc. complete
-
-
-
... More
GROUND FLOOR
56.7
12865
729468.75
... More
TOILET DOOR :- Supplying ,fitting and fixing of 32mm thick flush door shutter with approve quality of 30 mm thick BWR block board pasted with 1mm thick laminate on both side of approved design and quality. Including cost of all door fitting, fixtures etc. all complete
-
-
-
... More
GROUND FLOOR
14.18
10668
151280.89
... More
WOODEN DOOR FRAMES :- Supplying, fitting and fixing in WOODEN DOOR FRAMES of size 125mm X 75mm which is in contact with concrete and masonry surface fitted with required W.I. Clamps and required screws of approved quality etc. fixing in CC 1:2:4 including cost, conveyance and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge.
-
-
-
... More
GROUND FLOOR
172.35
1500
258525
... More
TOUGHENED GLASS DOOR :- Providing and fixing 12 mm thick Toughened glass door of required size and thickness, using adequate number of hardware and fasteners as per the approved design and shop drawing .including cost of all labour, material, loading , unloading, hardware, fasteners etc all complete as per the direction of E-IC/Architects
-
-
-
... More
GROUND FLOOR
9.45
15622
147627.9
... More
TOUGHENED FIXED GLASS WITH MS FRAME PARTITION:- Providing and fixing 12 mm thick Toughened glass fixed with MS Structural steel of required size and thickness, using adequate number of hardware and fasteners as per the approved design and shop drawing .including cost of all labour, material, loading ,unloading, hardware ,fasteners etc all complete as per the direction of EIC/ Architects
-
-
-
... More
GROUND FLOOR
42.74
7875
336577.5
... More
ALUMINIUM SYSTEM WINDOW :- Providing and fixing Anodized System Aluminum three track Sliding glazed windows of approve make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track .The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly . All glasses will be 6 mm clear toughened . The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa.
-
-
-
... More
GROUND FLOOR
37.26
13417
499943.5
... More
ALUMINIUM TOILET LOUVER :- Providing and fixing Colour coated galvanized steel louvers of approve make With Fixed windows made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work. Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 57 mm Mullion section size of 33 x 57 mm
-
-
-
... More
GROUND FLOOR
4.86
7571
36798.95
... More
TRANSLUCENT ROLLER BLIND :- Providing and fixing of MOTORIZED ROLLERS BLIND inclusive of all cost of labour, materials. (excluding GST) as per the detail design & specification. approved by eic .(Basic price Rs 400 /SFT).
-
-
-
... More
GROUND FLOOR
9.72
4249
41303.2
... More
BLACKOUT ROLLER BLIND :- Providing and fixing of MOTORIZED ROLLERS BLIND (100% Black out -Classic (without pelmet) inclusive of all cost of labour, materials. (excluding GST) as per the detail design & specification. approved by etc. ( Basic price Rs 550 / sft ) excluding gst APP MAKE - DEDECOR / EQUIVALENT
-
-
-
... More
GROUND FLOOR
14.58
5749
83820.42
... More
Providing & supplying of painting & art work made out of acrylic painting on canvas with pvc framing , 5 mm th glass on top & 6 mm ply on back side of the painting as per design approved by eic .
5.4
6969
37632.6
... More
Supplying and fixing wall decals/ wallpapers which are smooth / textured/ linear textured & 100% eco friendly , Non woven based . The film type is non woven based & vinyl coated . Overall length is 45.72 metre & overall width is 1220mm , 1524 mm , 610 mm . The product colour is white /off white and can be removed with water . Its shading coefficient is 0.93 & substrates are ABS, Glass, Paint, PMMA , Polycarbonate . Surface finish is matte finish . as per design approved by eic .
80.1
1441
115491.38
... More
Providing & fitting fixture of Non Woven Wrapper for Wall & Rigid Part 248 GSM Non woven Material with Water Resistant Coating as per the approved shade and design Including all cost of labour, taxes T & P etc as per the detail design & specifications approved by EIC .
20
562
11248
... More
Providing & fitting fixture of Frosted Film For Glass Brand: 3M Nonnumeric Calendared, White With Matt Finish, Thickness:- With adhesive: 3.5-4.5 mils (0.09-0.11 mm) Glue: Permanent, Pressure Sensitive Acrylic Glue , With Poly coated Craft paper based Liner as per the approved shade and design Including all cost of labour , taxes T & P etc as per the detail design & specifications approved by EIC .
20
312
6248
... More
Providing & fitting fixture of Frosted Film For Glass Brand: 3M 3M™ Scotch cal™ Crystal Film Series Cast Premium Calendared, White With Matt Finish, Thickness: With adhesive: 3.5-4.5 mils (0.09-0.11mm) Glue: Permanent, Pressure Sensitive Acrylic Glue, With Poly coated Craft paper based Liner as per the approved shade and design Including all cost of labour , taxes T & P etc as per the detail design & specifications approved by EIC .
15
1124
16872
... More
Providing & supplying S.S sinage of size 150mmx150 mm as per the approved shade and design Including all cost of labour , T & P etc as per the detail design & specifications approved by EIC
20
1103
22068
... More
Providing & supplying of sinage made out of lazer cut retro letter on acp with ms frame & all necessary accessories Including all cost of labour , T&P etc as per the detail design & specifications approved by EIC
45
1836
82633.5
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
... More
50 mm dia
189.65
1194
226442.1
... More
40 mm dia
76.44
783
59852.52
... More
32 mm dia
54
582
31428
... More
25 mm dia
131.65
405
53318.25
... More
20 mm dia
84.65
303
25648.95
... More
Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge
-
-
-
... More
50mm dia CPVC ball valve
4
2601
10404
... More
40mm dia CPVC ball valve
12
1612
19344
... More
32mm dia CPVC ball valve
12
1138
13656
... More
Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete
-
-
-
... More
15mm to 32mm dia pipe
216.29
211
45637.19
... More
Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
-
-
-
... More
Water Closet Complete set -WC (Wall mounted Water Closet- JAQUAR FLS-WHT-5953JPPSM/Equivalent), Single Piece Slim Concealed Cistren with Floor Mounting Frame,installation Kit and S Type Drain Pipe Connection set For wall hung WC (Without Flush control plate) - JAQUAR JCS-WHT- 2400FS /Equivalent , FLUSH PLATE- JAQUAR JCP-CHR- 852415/ Equivalent
16
25114
401827.2
... More
Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe including painting of fittings and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
... More
Under Counter wash basin Complete set ( Under Counter wash basin- JAQUAR -FNS-WHT-407015/ Equivalent) , Bottle trap JAQUAR ALD-769L 300X 190/Equivalent, JAQUAR ALD-CHR-709/Equivalent.
19
6983
132677
... More
Providing and fixing white vireous china urinal set with Installation Box with Control Cock with 175mm Long wall Connection including painting of fitting and brackets,cutting and making good the walls and floors wherever required as per the dirctions of Engineer-in-charge Urinal- JAQUAR URINAL WITH FIXING ACCESSORIES SET SIZE (JAQUAR URS-WHT-13257)/ Equivalent Sensor Concealed Type Flushing Valve for Western Commode Complete Set with Provision for Manual Operation Also (Battery Operated) Rs (JAQUAR SNR-STL-51093N /Equivalent ),Bottle trap JAQUAR ALD-769L300X190/Equivalant, , JAQUAR ALD-709/Equivalant, Urinal spreader bowl Top inlet 15mm with fixing stud (Jaquar ALD-1043/Equivalent)
10
24266
242660
... More
Providing& fixing 8mm thick frosted glass partition for urinal with patch fitting, clams etc including cost of all labour,material, sundries and all chrome hardware fitting etc all complete as per the direction of Engineer-in-charge. ( JAQUAR JSE-CHR-110US450X / Equivalent /Equivalent)
9
6251
56259
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm ( Kitchen Sink - Nirali Orra BG Large ( 610mmx 460 mm ) /Equivalent)
9
8654
77886
... More
Providing and fixing of Disabled Accessible toilet set consisting of wash basin, EWC ,cistern complete with fittings & seat cover,Grab bar etc, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
... More
Rimless Bowl For Coupled WC with UF Soft Close Seat Cover, Hinges, Fixing Accessories, Size:- 390x610 x800mm- JAQUAR DIS-WHT-93753P180UF ,
1
24334
24334
... More
Wash basin (JAQUAR DIS-WHT-93801), Bottle trap JAQUAR ALD-769L300X190/Equivalant, JAQUAR ALD -709/ Equivalant.
1
14414
14414
... More
Grab Bar Vertical swing,white (JAQUAR -WAC-WHT-860800/Equivalent)
1
3654
3654
... More
Grab Bar 692 mm long,white (JAQUAR -WAC-WHT-BR0600/Equivalent)
3
1290
3870
... More
Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours, materials, conveyance, loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge.
-
-
-
... More
Pillar Cock With Long neck with aerator (JAQUAR FLR-5015/Equivalent)-Common
19
1961
37259
... More
Pillar cock for disabled Toilet ( JAQUAR FLR-5031N/Equivalent )
1
2330
2330
... More
Twoway Bib cock jaquar FLR-5041N/Equivalent )-Common
17
2355
40035
... More
Angle Valve (JAQUAR FLR-5053N/Equivalent),-Common
58
1293
74994
... More
Health Faucet (JAQUAR ALD 573 /Equivalent)
17
1616
27472
... More
Toilet roll holder with stainless steel Flap (JAQUAR ACN-1153S/ Equivalent )-Common
17
1445
24565
... More
Soap Dish (JAQUAR ACN-1131N/Equivalent)-common
17
978
16626
... More
Soap Dispenser (JAQUAR ACN-1135N/Equivalent)-common
20
1642
32840
... More
Towel Ring (JAQUAR ACN-1121N/Equivalent)
15
1378
20670
... More
TOWEL RAIL (JAQUAR ACN-1111SM/Equivalent)
17
1656
28152
... More
GLASS SHELF (JAQUAR ACN 1171N/Equivalent)
20
1655
33100
... More
Double coat Hook (JAQUAR ACN 1161N/Equivalent)
17
608
10336
... More
Sink Cock with Extended Swinging Spout (Wall Mounted Model) With Wall Flange (JAQUAR FLR-5347SD/Equivalent)
9
2699
24291
... More
Bathroom mirror 600x600 mm
20
1393
27869.6
... More
CP Flange small
84
27
2346.12
... More
110mm dia pvc nahani trap without jally
56
132
7422.8
... More
CP extension piece
103
111
11452.57
... More
CP Grating
56
47
2681.84
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
235
2820
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes.
-
-
-
... More
110MM OD P.V.C SWR S/S PIPE(ISI TYPEA)
64.2
401
25766.67
... More
Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains, screws, wooden cleant, pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC
-
-
-
... More
75mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)
41.25
365
15091.73
... More
110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)
284.3
533
151676.89
... More
110mm p.v.c s/j with door
24
228
5490.48
... More
110mm p.v.c swr plain bend 87.5
24
140
3360.72
... More
110mm pipe clip
478
24
11916.54
... More
110mm dia p.v.c vent cowl
8
34
275.6
... More
110mm dia p.v.c swr coupler
48
91
4409.76
... More
110mm dia p.v.c Y with door
24
412
9903.36
... More
110x110x110 mm dia pvc swr Tee
24
196
4719.84
... More
Supplying and fixing Aquaguard Storage Cooler#Cum-Purifier (80 Ltr. Capacity ) with all cost complete.
2
95528
191057.46
... More
Providing and fixing Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor including all cost of labour, material, testing, transporatation etc all complete as per the direction of Engineer-in-charge. ( Jaquar HDR-SSF-AK2803D/ Equivalent )
4
9597
38388.56
... More
Providing and fixing Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted etc. including all cost of labour, material, testing, transporatation etc all complete as per the direction of Engineer-in-charge.
4
7579
30317.12
... More
Supplying and installation of rest room cubicles of following types of specification etc. including cost of all labour,material,conveyance , loading and unloading etc all complete as per the direction of Architect/Engineer-in-charge.
14
55752
780528
... More
Thickness of Compact Laminate : 12 m
-
-
-
... More
Colour of HPL Boards: Single Colour
-
-
-
... More
Size of Cubicle : 1200mm (W) X 1500mm (D) X 2100mm (H)
-
-
-
... More
Door Size : 1925mm (H) x 600mm (W
-
-
-
... More
Divider Size : 1945mm (H)
-
-
-
... More
Overall Height Of Cubicle : 2100mm (Including bottom Gap of 100mm)
-
-
-
... More
Accessories: Standard – Stainless Steel - 304 Grade accessories)
-
-
-
... More
a) SS “U” Channel
-
-
-
... More
b) SS “F” channel (Only Corner Unit)
-
-
-
... More
c) SS Door Stopper Channel
-
-
-
... More
c) SS Top Rail
-
-
-
... More
d) SS Coat Hook
-
-
-
... More
e) SS Privacy Thumb turn c/w Occupancy Indicator
-
-
-
... More
f) SS Door Knob
-
-
-
... More
g) SS Hinges with Cover
-
-
-
... More
h) SS Shoe Box Leg 12mm - 316 Grade
-
-
-
... More
i) Rubber Lining for Groove
-
-
-
... More
j) S.S.Screws 304 G & P.V.C Wall Plugs
-
-
-
... More
SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.
-
-
-
... More
Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change.
-
-
-
... More
With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm)
16
4673
74779.2
... More
Constructing brick masonary road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with precast R.C.C. vertical grating complete as per standard design Including all cost of labour, material, T&P etc. all complete as per the direction of Engineer-in-charge.
12
14766
177196.8
... More
Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge.
-
-
-
... More
Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets.
10
12514
125140
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
166.01
282
46881.22
... More
Supplying, laying, jointing,fitting and fixing, testing and commission-ing uPVC foam core structured pipes confirming to IS certification with SN4 or SN8 Solvent Cement joints with or without rubber ring for Soil Pipes and coupler complete for external sewerage system, including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement.including cost of all labours, materials, conveyance, loading and unloading, all taxes and sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
160 mm dia UPVC S/S SN-8 Foam Core Pipe
166.01
1388
230508.21
... More
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification .
166.01
1023
169828.23
... More
Supplying all materials ,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent)
10000
13
132000
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Pipes, cables etc, not exceeding 80 mm dia.
105
172
18154.5
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
10.5
465
4889.85
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge
94.5
509
48157.2
... More
Providing and laying Chlorinated Polyvinyl Chloride (CPVC) pipes & specials in trenches conforming to IS:15778 including all CPVC plain & brass threaded fittings like bend, tees, reducer etc, jointing by solvent cement with non heating process. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm dia CPVC SCH-80 Pipe
105
915
96127.5
... More
Providing & fitting fixing cast iron sluice valve with double flange ends for water work purpose conforming to IS -2685-1974 for the following rating & nominal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia C.I D/F sluice valve with hand wheel (PN-10)
4
7887
31549.6
... More
Providing & fitting fixing cast iron non return valve with double flange ends for water works purpose conforming to I.S: 2685-1971 for following rating & nominal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, all taxes, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia C.I D/F non return valve
2
11046
22092
... More
Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia
2
9709
19418
... More
Providing flanged joints to PVC. pipes and specials, including testing of joints : including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
For 80 mm diameter pipe
2
243
487.1
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
14320
57280
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
7692
30768
... More
SEPTIK TANK & SOAKPIT
-
-
-
... More
Septik Tank
-
-
-
... More
Earth work in excavation by manual / mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
71.37
235
16786.22
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
3.31
509
1686.78
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
3.31
6045
20009.28
... More
Providing and laying of Cement Concrete of grade 1: 2 :4 (1cement : 2 sand : 4 graded 12mm size hard granite chips ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period ..including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge
1.18
7585
8950.89
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge..
15.37
130
2008.86
... More
Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips including the cost of cantering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc .complete.
-
-
-
... More
Base slab
8.26
6883
56858.54
... More
Wall
12.31
10752
132366.97
... More
Slab
3.25
14068
45721.33
... More
Providing, fixing in position TMT/ Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of materials, conveyance and taxes of steel and binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
21.75
9324
202814.4
... More
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
93.45
205
19241.36
... More
Providing and fixing SFRC Manhole cover with frame 500 x 500 mm
2
2313
4626.4
... More
Soakpit
-
-
-
... More
Earth work in excavation by manual / mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
13.29
235
3125.81
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
0.42
509
214.03
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
0.3
6045
1813.53
... More
Honey comb masonry with 25cm ×12cm ×8cm size Kiln burnt bricks having crushing strength not less than 75 kg/cm2 Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
18.84
1212
22837.85
... More
Supplying, filling, spreading of dry brick khoa of size range 4 cm in soak pit, etc. including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
5.3
350
1858.18
... More
Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips including the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc .complete.
-
-
-
... More
Roof slab
0.47
14068
6612.01
... More
Providing, fixing in position TMT/ Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of materials, conveyance and taxes of steel and binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
0.43
9324
4009.66
... More
RECHARGE PIT- (9 NOS)
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).
249.4
651
162359.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer in-charge.
-
-
-
... More
110mm Dia
249.4
551
137431.87
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
4.93
1569
7735.17
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
467.37
235
109925.42
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, etc all complete as per specification and direction of the Engineer in charge
3.5
5674
19861.45
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, etc all complete as per specification and direction of the Engineer in charge
55.69
5469
304596.46
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, etc all complete as per specification and direction of the Engineer in charge
484.32
194
94151.81
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, etc all complete as per specification and direction of the Engineer in charge
484.32
40
19518.1
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works as per IS Specification, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but excluding cost of Reinforcement and Binding wires etc.
-
-
-
... More
RCC Slab
8.05
14068
113248.21
... More
REINFORCEMENT :- Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
7.24
9324
67511.55
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
36.26
1161
42097.86
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
36.26
1185
42968.1
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in charge.
36.26
1184
42931.84
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.
82.3
130
10756.61
... More
W I R I N G
-
-
-
... More
(Colour Code of wires to be strictly maintained)
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthling the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
First Point
-
-
-
... More
(Group B)
200
937
187400
... More
Group C
97
1150
111550
... More
Secondary Point .(LOOP POINT)
-
-
-
... More
Group C (Controlled by same switch-3Mtr wire only)
166
801
132966
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class FRLS PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ( 6A PP Looping & Inverter wiring)
1190
267
317730
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (SB,Comp,16A PP Wiring)
1860
305
567300
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (AC IDU wiring)
100
358
35800
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
30
574
17220
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire(AC wiring)
100
494
49400
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
30
796
23880
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire (L+P DB & VRF)
130
1013
131690
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
15
1441
21615
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
60
39
2340
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
300
98
29400
... More
25 mm
500
113
56500
... More
Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess with phenolic laminated sheet cover including painting etc as required.
-
-
-
... More
75 mm X 75 mm X 60 mm deep
25
135
3375
... More
100 mm X 100 mm X 60 mm deep
13
162
2106
... More
150 mm X 75 mm X 60 mm deep
8
169
1352
... More
200 mm X 125 mm X 60 mm deep
16
256
4096
... More
200 mm X 150 mm X 60 mm deep
4
285
1140
... More
200 mm X 250 mm X 60 mm deep
4
383
1532
... More
Supplying and fixing 3 mm stainless steel cover on the floor junction box including fabrication, with suitable stainless steel screws, etc as reqd.
70
22
1540
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1-2 Module
5
227
1135
... More
3 Module
32
253
8096
... More
6 Module
12
319
3828
... More
8 Module (Computer board)
6
368
2208
... More
12 Module (Server/BMS)
1
450
450
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate, switch box etc. as required.
-
-
-
... More
5/6 amps switch
60
79
4740
... More
15/16 amp switch
2
128
256
... More
3 pin 5/6 amp socket outlet
70
101
7070
... More
6 pin 15/16 amp socket outlet
2
164
328
... More
Telephone socket outlet
1
120
120
... More
TV antenna socket outlet
2
120
240
... More
Ceiling rose
65
65
4225
... More
Bell push
1
113
113
... More
AC starter, 25A, 2 Module, 240V
4
524
2096
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1
303
303
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
33
990
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
41
383
15703
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
47
481
22607
... More
Erection of wall bracket /ceiling LED fittings of all sizes and shapes containing upto two GLS lamps/6-20W LED per fitting, complete with all accessories including connection etc. as required.
290
81
23490
... More
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
1
101
101
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
1
80
80
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
61
142
8662
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 100 cm length, or with chain hook/suspender arrangement, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
34
361
12274
... More
Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
68
148
10064
... More
Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
19
318
6042
... More
SDB'S, MCB, ISOLATOR,PANELS
-
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
6 way (4 + 18), Double door
4
9240
36960
... More
Supplying and fixing following way, sheet steel, MCB distribution board, 415/240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
-
-
-
... More
4 way (4 + 12), Double door TPN, Horizontal
1
3584
3584
... More
6 way (4 + 18), Double door TPN, Horizontal
1
4379
4379
... More
6 way , Double door, SPN
13
5274
68562
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, 10kA miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
-
-
-
... More
Single pole
144
213
30672
... More
Single pole and neutral
1
522
522
... More
Triple pole
1
890
890
... More
Four Pole
1
1007
1007
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
9
8
72
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
1
839
839
... More
63 amps
1
896
896
... More
100 amps
1
1070
1070
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
1
2295
2295
... More
40A
1
2873
2873
... More
63 amps
4
2553
10212
... More
Supplying and fixing following rating,DP (Single phase and neutral), 240 volts, residual current circuit breaker RCCB having a sensitivity current of 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
3
1805
5415
... More
40 amps
8
2358
18864
... More
63 amps
3
2431
7293
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
1349
2698
... More
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
3634
7268
... More
CABLE AND CABLE TRAY
-
-
-
... More
Supplying and installing following size of MS cable trays with powder coating paint of approved colour & with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
15
434
6510
... More
200 mm width X 50 mm depth X 1.6 mm thickness
15
566
8490
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
645
12900
... More
Supplying and installing following size of perforated MS cable tray bends with powder coating paint of approved colour) & with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
2
740
1480
... More
200 mm width X 50 mm depth X 1.6 mm thickness
2
1064
2128
... More
300 mm width X 50 mm depth X 1.6 mm thickness
2
1254
2508
... More
Supplying and installation of Ladder type MS cable trays with synthetic enamelpaint of approved colour & with convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (Design to be approved by Engineer in charge)
100
143
14300
... More
Cables MV
-
-
-
... More
Supplying the following Size PVC/ XLPE insulated PVC seethed Aluminium armour cable of 1.1 kV as per IS 1554 etc as reqd.
-
-
-
... More
a) 3 core 4 sq.mm, Aluminium
30
133
3990
... More
a) 3 core 6 sq.mm, Aluminium
1700
166
282200
... More
b) 4 core 10 sq.mm, Aluminium
5
240
1200
... More
c) 4 core 16 sq.mm, Aluminium
30
288
8640
... More
d) 3 1/2 core 25 sq.mm, Aluminium
5
332
1660
... More
e) 3 1/2 core 35 sq.mm, Aluminium
35
400
14000
... More
f) 3 1/2 core 50 sq.mm
5
539
2695
... More
h) 3 1/2 core 150 sq.mm, Aluminium
150
1319
197850
... More
Supplying the following Size PVC/ XLPE insulated PVC seathed copper un-aromour cable of 1.1 kV as per IS 1554 etc as reqd.
-
-
-
... More
a) 4 core 4 sq.mm, copper
5
335
1675
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
25
34
850
... More
b) above 35 sq. mm and upto 95 sq.mm (clamped with 1mm thick saddle)
25
70
1750
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
... More
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
35
42
1470
... More
b) above 35 sq. mm and upto 95 sq.mm (clamped with 1mm thick saddle)
30
103
3090
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
a) Upto 35 sq. mm
1665
211
351315
... More
b) above 35 sq. mm and upto 95 sq.mm.
5
223
1115
... More
c) above 95 sq. mm and upto 185 sq.mm
150
235
35250
... More
Supplying and making end termination with double brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required.
-
-
-
... More
a) 2 core 6 sq.mm, Alluminium
260
172
44720
... More
b) 4 core 10 sq.mm, Alluminium
2
199
398
... More
c) 4 core 16 sq.mm, Alluminium
2
235
470
... More
d) 3 1/2 core 25 sq.mm, Alluminium
2
239
478
... More
e) 3 1/2 core 35 sq.mm, Alluminium
4
280
1120
... More
f) 3 1/2 core 50 sq.mm
2
320
640
... More
h) 3 1/2 core 150 sq.mm, Alluminium
4
558
2232
... More
Supplying and laying 25 x 5 GI flat along with cables in exsting surface/ cable trench including making connection for loop earthing as reqd.
150
169
25350
... More
Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all level for panel plinth with neat plastering the surface as reqd.
10
5643
56430
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
-
-
-
... More
along with all accessories like socket, bend, couplers etc.
-
-
-
... More
conforming to IS 14930, Part II complete with fitting and cutting,
-
-
-
... More
jointing etc. in the existing trench, complete as required including the cost of material ,labor T & P as required as EIC.
-
-
-
... More
63 mm dia (OD -63mm & ID- 51mm nominal)
120
203
24360
... More
120 mm dia (OD -120mm & ID- 103mm nominal)
40
302
12080
... More
Providing, laying and fixing following dia RCC pipe NP2 class (heavy duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
250 mm dia
40
779
31160
... More
300 mm dia
30
888
26640
... More
Earthing for PANELS & Computer
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
6190
24760
... More
Earthing with COPPER earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
11927
71562
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
130
4489
583570
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
20
1014
20280
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)( With excavation and refilling)
80
120
9600
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe (with supply of pipe)from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
20
619
12380
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for loop earth connections along with cables etc. as required.
20
187
3740
... More
Supply & fixing of 400 x 50 x 6 mm GI busbar with suitable insulator,nut & bolts & all other materials as required as per EIC.
2
984
1968
... More
Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required.
63
750
47250
... More
SAFETY
-
-
-
... More
Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
226
452
... More
Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with suitable pedastal arrangement for each transformer sub-station yard etc as reqd.
1
1150
1150
... More
Supplying and Laying 12 mm thick rubber mat of ISI marked and of approved etc as reqd.
3
1565
4695
... More
Supplying and fixing shock treatment chart bonded with glass frame of bigger size on the existing surface with suitble clamp /hook arrangement etc as reqd.
1
650
650
... More
Supplying and fixing First aid box with required first aid for the panel room in all floors as reqd.
1
1050
1050
... More
Supplying 11 kV class hand gloves as reqd.
1
850
850
... More
Panels
-
-
-
... More
Design, supply, installation, testing and commsioning of cubicle main panel for indoor/Outdoor installation of wether prrof design as per IP 54 class, made out of 2 mm thick CRCA sheet as per the drawing with cubicle type inernal arrangement of 2.0 mm thick sheet and with front & back opening system suitable for mounting following switch gears, busbars, metering unit, including painting with powder coated paint of approved colour and shed with earthing the body etc as reqd. (Drawing shall be approved by engineer -in charge/Consultant)
-
-
-
... More
Main Pnel Board = (Indoor Floor mounted type-)
1
430600
430600
... More
Incommer:- 02 no. 250A., 25KA FP MCCB
-
-
-
... More
Busbar:- 04 nos. 300A. Al. bus bar duly sleeved.
-
-
-
... More
Incommer:- 250A FP O/L C/O switch, 250A FP Contactor with relay for auto manual ,A/M switch for indication.,1nos 32A FP 32A MCB with 65KA FP SPD
-
-
-
... More
O/G-) 40 / 63A,FP, 10KA, MCB-6nos
-
-
-
... More
O/G-) 4 nos 100A,FP,25KA, MCCB, 1nos 125A,FP,25KA, MCCB , 3nos 40/63A,FP,300mAKA, RCCB
-
-
-
... More
O/G-) 32FP MCB-2nos,32 2P MCB-15nos,
-
-
-
... More
Instrument:- i) 2sets of 03 nos. phase indicating lamp with control fuse
-
-
-
... More
ii) 01 Set of (0-250)A Digital MFM
-
-
-
... More
(Duly factory wired)
-
-
-
... More
External Light Panel Board = (Outdoor Floor Mounted type-)
1
29500
29500
... More
Incommer:- 01 no. 63A., 16KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 100A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)32A FP ,10KA, MCB-2nos ,
-
-
-
... More
10-16A SPN ,10KA, MCB-6nos
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of 0-500V Voltmeter
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Machine Panel Board(Type-1) = (Intdoor Wall Mounted type-)
1
67500
67500
... More
Incommer:- 01 no. 100A., 25KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 150A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)32A-63A FP ,25KA, MCCB-4nos ,
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of (0-100)A Digital MFM
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Supplying and fixing of Single Phase Kwh meter (5-30)A with LCD display with Box ,approved as per Local EB complete with connections, testing and commissioning etc. as required.
14
300
4200
... More
Supplying and fixing of Single Phase Kwh meter (10-60)A with LCD display with Box ,approved as per Local EB complete with connections, testing and commissioning etc. as required.
1
6200
6200
... More
Fitting and Accessories- Internal
-
-
-
... More
Supply, Installation, Testing, and commissioning of Exhaust fan of following size (dia) suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers in the existing opening, making good the damage, connections,etc as required.(Make-Usha/Havells/RR/Hallonix/CG/Orient)
-
-
-
... More
a) 300 mm Dia ( Toilet-PVC) Industrial
10
2145
21450
... More
b) 450 mm Dia( Kitchen-Metal) Industrial
10
4950
49500
... More
SITC of 1200mm sweep ,BEE 5 star rated,ceilling fan with Brush Less Direct Current (BLDC) Motor,Class of insulation: B,3 nos. blades, 30cm long down rod, 2 nos. canopies,shackle kit,safety rope copper winding,power factor not less than 0.9,service Value (CMM/W) minimum 215 CMM,350RPM(tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories i/c safety pin,nut bolts,washers,temperature rise=75 degree C(max.) insulation,resistance more than 2 mega ohm,suitable for 230V,50Hz,Single phase AC Supply,earthing etc. complete as required.(Make-Usha/Havells/RR/Hallonix/CG/Orient)
68
2730
185640
... More
Supplying & Fixing of energy effiecient 400 mm sweep ceiling/ wall mounted fan of approved make etc complete as reqd.(Make-Usha/Havells/RR/Hallonix/CG/Orient)
1
3370
3370
... More
Supply, Testing & commissioning of surface/ recess type energy efficiency White LED fiting 2ft x 2ft mm, suitable for 33-36 watt (Min. 110lm/Watt), BIS marked, 6000K confirming to LM-80 catagory of approved make etc as reqd.(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
2
4270
8540
... More
Supply, Testing & commissioning of recess mounted energy efficiency White LED down lighter suitable for following LED confirming to LM-80 catagory with a special diffuser of approved make etc as reqd. (Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
-
-
-
... More
a) 15 Watt Square/round .
4
1681
6724
... More
b) 12 Watt Square/round .
41
1307
53587
... More
e) LED BH fitting suitable for 9W-12 LED lamp with lamp .
8
1450
11600
... More
Supply, Testing & commissioning of surface type energy efficiency linier recessed Down lighter, Glare free, tiltable, with 15 watt LED BIS CERTIFIED, of approved make etc as reqd.(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
140
1700
238000
... More
Supply, Testing & commissioning of surface type energy efficiency LED tube light Box type fitting suitable for 1 x 18/20 watt LED lamp (with lamp) of approved make etc as reqd. (Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
55
750
41250
... More
Supply, Testing & commissioning of Recess/Surface mounted LED Luminare including 36W LED(4'x1') fitting including the cost of labor & material T & P as required as EIC. (Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
34
5000
170000
... More
Supply, Testing & commissioning of Lupus Outdoor(IP-65) type wall mounting 10-12W LED Decorative wall light fitting with white body including LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC.. (Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
31
3200
99200
... More
Supply, Testing & commissioning of Outdoor(IP-65) recess type 3W LED foot light fitting with white body including LED luminairs as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
6
750
4500
... More
Supply, Testing & commissioning of 1Light cage type,antique marbel with antique finish pendant (3mtr String)ligh including 7-10w LED lamp(3000K as per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT)
10
3360
33600
... More
Supply, Testing & commissioning of 1Light bamboo wood with natural wooden finish pendant (3mtr String)light including 7-10w LED lamp (3000Kas per EIC of approved make including the cost of material ,labor T & P as required as EIC..(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
16
8400
134400
... More
Supply, Testing & commissioning of 1Light clear glass with brass finish pendant (2mtr String)light including 7-10w LED lamp (3000Kas per EIC of approved make including the cost of material ,labor T & P as required as EIC...(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
6
5580
33480
... More
Supply, Testing & commissioning of surface monted (Track TYPE) 10-12W LED light fitting including 1 no. of 20watt LED luminairs (3000K)& driver as per EIC of approved make including the cost of material ,labor T & P as required as EIC.(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
4
3360
13440
... More
Supply, Installation,Testing & commissioning of indoor Flexible Warm White LED strip Light of 25W/5mtr Spool (3000K)with Driver for cove lighting including all other materials as required..(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
15
412
6180
... More
Supply, of recess mounted round Warm White LED COB spot downlighter with aspecial frosted diffuser suitable for 6W LED fitting including 6 watt LED luminairs (3000K)of approved make including the cost of labor & material T & P as required as EIC.(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
6
804
4824
... More
Supply of pendent (including suspension) /surface mounted integral Round LED cylindrical Downlight with superior optics clubbed with variety of beam angles (36 and 60 degree) to create the right play of light and having 74 mm Dia, length 330 mm with power consumption Maximum upto 10 W having system lumen output of Minimum 1000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 4000K, CRI80 Ra. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 10%; IP 20;. including with all,., materials & labour. .(Make JAQUAR/ Philips-HDL /Leksa/ Wipro/ CG/LT/Havells)
29
3000
87000
... More
Supply, Installation,Testing & commissioning of black painted galvanized decorative post with built in loop box with MCB suitable for fixing following LED/CFL decorative light fitting, including driver for yard illumination as reqd,making connection with suitbale size copper wire/ lugs and sockets, earthing, making testing commissiong etc as reqd. including civil work as required also including the cost of material ,labor T & P as required as EIC . (As desired by Engineer in charge)
-
-
-
... More
Lighting pole of(Single Bracket)3660mm Ht including 24W LED lamp,base,Nut & Bolts ,Single Bracket etc (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
40
24220
968800
... More
Lighting pole of (Double Bracket)3660mm Ht including 2x24WLED lamp,base,Nut & Bolts ,Double Bracket- (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
6
27220
163320
... More
Supply, Installation,Testing & commissioning of Post Top Lighting pole of cast aluminium embellishment perforated Floral CNC design in hot dip galavanising thickness 40microns epoxy primer,U.V ray resistant polyurethane paint. Coating thickness 90 microns,Opaque PMMA diffuser ,decorative post Top Pole with built in loop box with MCB suitable for fixing following LED/CFL decorative light fitting, including driver for yard illumination as reqd,making connection with suitbale size copper wire/ lugs and sockets, earthing, making testing commissiong etc as reqd. including civil work as required also including the cost of material ,labor T & P as required as EIC . (As desired by Engineer in charge)(Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
-
-
-
... More
HEIGHT-4000mm( 750MM DIA 114X3.6THICK+2250 DIA 60X3 MM THICK )
17
58500
994500
... More
POST TOP LED - 60Wt.
-
-
-
... More
BOTTOM LED- 11Wt.
-
-
-
... More
Supplying & Fixing of following LED lamp fitting (IP-65)with lamp,Driver ,Base,units suitable for mounting on surface/wall/ above ploe including fixing on the pole making connection with suitbale size copper wire/ lugs and sockets, earthing, making testing commissiong etc as reqd including civil work as required also including the cost of material ,labor T & P as required as EIC .(As desired by Engineer in charge). (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
-
-
-
... More
LED bush & spike luminair 6 watt with extruded alluminium housing and adjustable mounting bracket with lamp(Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
45
4770
214650
... More
Copper dust painted die cast alluminium post top suitable for 30watt LED lamp with Driver for outdoor installtion(Gate light) (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
4
13068
52272
... More
bollard lighting mild steel , perforated Floral CNC design, cast aluminium fixture, stainless steel screws, corrosion and uv ray resistant coating, polycarbonate diffuser. height-900mm 140mm dia led- 10/15wt with Lamp. (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
30
21400
642000
... More
Under water fountain light suitable for 9 x 2 watt (Make-Homdec /Passolite /Bajaj/HAVELLS/Jaquar/K-Lite)
2
36140
72280
... More
Reciving, erection, installation & commissioning of Stainless Steel automatic Air Turbo Ventilators of 24” dia with FRP Base Plate including all other acessories,Civil work & Labour.
15
8500
127500
... More
Fitting and Accessories- Façade
-
-
-
... More
Supply inspection testing & Commissioning High Quality LED Spot Light
34
5725
194650
... More
Power : 10W
-
-
-
... More
CCT : 3000K
-
-
-
... More
Beam Angle : 15°/30°
-
-
-
... More
Input Voltage: 100-240V AC
-
-
-
... More
Body : Die cast Aluminium
-
-
-
... More
IP66 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
-
-
-
... More
(Make-Canara / LT /Jaquar/Leksa/Halonix/Philips)
-
-
-
... More
Supply inspection testing & Commissioning of High Quality LED Strip Light,Power : 15W/m
90
3435
309150
... More
CCT : 3000K
-
-
-
... More
Input Voltage : 24V DC
-
-
-
... More
IP66 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
-
-
-
... More
(Make-Canara / LT /Jaquar/Leksa/Halonix/Philips)
-
-
-
... More
Supply inspection testing & Commissioning of Aluminum Extrusion/clip for LED Strip including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
90
716
64462.5
... More
(Make-Canara / LT /Jaquar/Leksa/Halonix/Philips)
-
-
-
... More
Supply inspection testing & Commissioning of High Quality LED Driver
9
7727
69547.5
... More
Power : 200W
-
-
-
... More
Input Voltage : 100-240V AC
-
-
-
... More
Output Voltage : DC 24V
-
-
-
... More
IP65 including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
-
-
-
... More
(Reputed Make)
-
-
-
... More
Supply inspection testing & Commissioning of Waterproof Power Connectors for Light Fixture including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
43
787
33862.5
... More
(Reputed Make)
-
-
-
... More
Supply inspection testing & Commissioning of IP66 plain junction Boxes including the cost of material ,labor T & P as required as EIC shall be approved by EIC before Fixing.
9
7155
64395
... More
(Reputed Make)
-
-
-
... More
Lightning Arrestor
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
14
400
5600
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
75
81
6075
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
140
98
13720
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
170
146
24820
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
95
380
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
50
159
7950
... More
S/F 50 mm dia Light duty GI pipe, 3 mtr long in ground for protection of GI conductor etc as reqd.
4
159
636
... More
Sub Total =
-
-
-
... More
Data Networking,WIFI,CCTV,IP-PBX System
-
-
-
... More
Supply and laying of Cat6 4-pair 23AWG UTP Cable in the existing ISI marked PVC conduits for data and voice,CCTV & access Control including the cost of labor & material T & P as required as EIC.(Make: Tyco/ Legrand/ Digisol)
1500
75
112500
... More
Supply, installation and commissioning of RJ-45Jack of Category 6 with Single-port British-style Face plate 86x86 mm with Curveture and Wall Mout Box l(G.I/PVC) , to be fixed in concealed manner in partition/wall by necessary bolts & nuts including the cost of labor & material T & P as required as EIC.( Make: Tyco/ Legrand/ Digisol)
30
630
18900
... More
Fire Detection System-:
-
-
-
... More
Supply, Installation, Testing and Commissioning of Intelligent Addressable Fire Detection and Alarm System
-
-
-
... More
CONTROL EQUIPMENTS:
-
-
-
... More
32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 2 Loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 320 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have (minimu 240 Devices) atleast 126/99 addressable detectors and addressable devices with up to 2.0 km loop length, . with 12V battery back up for 30 Minutes and battery charger in built .
1
239225
239225
... More
Make: Siemens/Honeywell (Notifier)/ or Similar Superior (UL/EN approved)
-
-
-
... More
Supplying and fixing Intelligent Addressable type photo thermal detector with base for use smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.Including all materials,labour,taxes (excluding GST) etc as required as per direction of EIC.
30
2858
85740
... More
Supplying and fixing Intelligent Addressable type HEAT detector with base for use as heat with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong, materials, labour, taxes etc as required as per direction of EIC.
12
2726
32712
... More
Sypplying and fixing Intelligent Addressable Manual Call Point i/c testing and commissiong etc as reqd.Including all materials, labour, taxes etc as required as per direction of EIC.
3
3871
11613
... More
S/F Addressable Loop sounder with strobe interface module, power supply for sounder and programmable by software having operating temperature -10⁰C to + 55⁰C etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
3
3506
10518
... More
S/F Analogue Addressable Control module with IP66 casing containing two relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.
2
3003
6006
... More
S/F Analogue Addressable Monitor module with IP66 casing containing four relay inputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.
3
2400
7200
... More
S/F Addressable phone control module with IP66 casing etc complete as reqd.
1
3267
3267
... More
S/F fire fighter telephone handset etc complete as reqd.
1
5740
5740
... More
S/F fire fighter phone jack etc complete as reqd.
1
1600
1600
... More
S/F Duel LED Response Indicator (LOCAL).Including all materials,labour,taxes etc as required as per direction of EIC.
6
276
1656
... More
CABLE & WIRING ACCESSORIES
-
-
-
... More
S/F 3"/3" JB for mounting of detectors & other accessories with necessary fittings.Including all materials, labour, taxes etc as required as per direction of EIC.
90
102
9180
... More
Supplying and fixing Outdoor Electronic Sounder with 4 distinct tone including 40W Speaker with required accessories as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
2
8646
17292
... More
Supplying & Laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
1200
173
207600
... More
AIRCONDITIONING SYSTEM-:
-
-
-
... More
Supply of Full Inverter VRF System with Modular type outdoor units (Top Discharge) , all scroll DC Inverter compressors for Cooling applications along with different types of indoors compitable with VRF ODUs with R 410 A . All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz.. The outdoor fins should be with corrosion resistant chemical coating at factory only alongwith hydrophilic coating to shield it from Salt, Sand & other elements brought in by the air. The manufacturer must be OEM of its compressor, which is fitted in the VRF outdoor unit. It can work upto 53 Degree Celsius. All proposed outdoor unit should have minimum COP of 3.4 at 100% load condition for Cooling in standard AHRI test conditions (Ambient DBT-35 Deg C, Inside DBT 27 Def C/WBT 19 Deg C). Proposed outddor unit system should not have any deration in cooling capacity upto 39 Degree C ambient temepetrure . Make LG, Mitsubishi Electric, Hitachi
-
-
-
... More
Capacity: 12 HP
1
319120
319120
... More
Capacity: 14 HP
1
336900
336900
... More
ODU Kit
1
10500
10500
... More
SITC of The Indoor units suitable for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and shall have shall have electronic control valves to control refrigerant flow with washable Filters,BLDC motors.
-
-
-
... More
8.0 TR Ductable Unit
3
121280
363840
... More
IR Sensor for Ductable
3
2160
6480
... More
Supply of Y-Branches
2
6500
13000
... More
Supply of ceiling mounted Inverter Type Cassette Air Conditioner with R410 -A Refrigerant Gas 4 ways ,fan motor should be BLDC,comprosser should be Twin Rotary and machine can work in a single phase main power supply to the Out Door Unit .Capable of operation up to 53 deg ambient temperature.Sound level should be a minimum of 44 dB(A). Out door unit fins should be corrosion resistance apart from hydrophilic coating.Make- LG,Mitsubishi Electric, Hitachi
-
-
-
... More
4.0 TR
4
130270
521080
... More
Installation, Testing & commissioning of VRF Out Door units.
-
-
-
... More
Capacity: 12 HP
1
15000
15000
... More
Capacity: 14 HP
1
17500
17500
... More
Installation, Testing & commissioning of VRF Indoor units.
-
-
-
... More
4.0 TR - 4Way Cassette AC
4
3500
14000
... More
8.0 TR Ductable Unit
3
10500
31500
... More
SITC of the Cu. refrigerant pipes with 19mm/13mm with nitrile rubber tube insulation of following sizes Make: Nippon/ Ravi Tubes/ Mandev/ Total Line
-
-
-
... More
Gas line with 19mm thick insulation
-
-
-
... More
34.9mm
10
1925
19250
... More
28.58mm
25
1540
38500
... More
22.2mm
20
1353
27060
... More
Liquid line with 13mm thick insulation
-
-
-
... More
19.05mm
10
1155
11550
... More
15.88mm
10
1056
10560
... More
12.7mm
5
935
4675
... More
9.52mm
20
781
15620
... More
SITC of the Cu. refrigerant pipes with nitrile rubber tube insulation of following sizes Make: Nippon/ Ravi Tubes/ Mandev/ Total Line - For Cassette Unit
75
1250
93750
... More
Control & Transmission Wiring
-
-
-
... More
Supply Installation Testing and Commission of Control wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ Finolex
75
250
18750
... More
Supply Installation Testing and Commission of Control wiring of 4 core x 1.5 sqmm copper in suitable conduits between Cassette indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ Finolex
80
275
22000
... More
Supply Installation Testing and Commission of PVC drain pipe with 6mm thick nytrile tube insulation.Make: Supreme/ Finolex or equivalent
-
-
-
... More
32mm
50
375
18750
... More
40mm
20
455
9100
... More
Commissioning of VRV systems including topping R410A gas as per site requirements
18
1450
26100
... More
Design, supply, fabrication & erection of air distribution Factory Febricated Oval GSS Spiral Ducting in accordance with the approved ducting lay out drawing, complete with all accessories, dampers, guide vanes, support, etc.
-
-
-
... More
24 G GP Sheet
40
1050
42000
... More
22 G GP Sheet
60
1300
78000
... More
Providing insulation over the ducts with 13 mm thick Nitrile rubber Insulation fix with proper adhesive.
100
750
75000
... More
Dynacraft/Systemair/carry air or equivalent make linear grills or extruded aluminium section finished with power coated or approved colour.
-
-
-
... More
Diffuser with Damper
2
10500
21000
... More
Grill
3
7500
22500
... More
Supply & Installation of Galvanised Steel Slotted Tray for copper piping for the safety of nytrile insulations over copper pipe. ( For the exposed Area only)
-
-
-
... More
50mmx300mm X 50mm
15
850
12750
... More
Fabrication of supports with MS Angle, C-channels, I-section, Additional supports etc. with two coats of the red oxide paint and two coats of finished colour as per site instruction.
140
155
21700
... More
Lifting , Shifting of Indoor Unit from Transporter to Terrace and Scarp folding
1
25000
25000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements