Orissa Agro Industries Corporation Limited Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Orissa Agro Industries Corporation Limited - OAIC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Feb 2024
Closing Date29 Feb 2024
Tender Amount₹ 11,53,24,772
Costs
EMD
₹ 11,53,247Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_OAICL_101348_1Bid Award Id
ViewTender No
M.D./OAIC-35 (E and I) / 2023-24Tender Authority
Orissa Agro Industries Corporation Limited ViewPurchaser Address
-Website
http://https://www.orissaagro.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge.
1945.38
1194073
613.8
... More
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
3588.77
396200
110.4
... More
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.
546.29
3094034
5663.7
... More
First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
71.48
356798
4991.3
... More
First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
-
-
-
... More
Ground Floor
616.81
3102297
5029.6
... More
First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
6.52
35853
5499
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
a) Footing
471.77
3190944
6763.8
... More
b) Columns.
102.81
1499788
14587.4
... More
c) Plinth Beams
122.82
931656
7585.3
... More
d) Lintel Beams
0.54
7436
13822.6
... More
e) Roof Beams.
33.93
494877
14587.4
... More
f) RCC Slab .
138.06
1819807
13180.9
... More
g) Staircase
3.21
46706
14536.6
... More
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars.
-
-
-
... More
a) Footing & Pedestal
50007.41
4571177
91.41
... More
b) Column
18095.26
1654088
91.41
... More
c) Plinth Beam
18423.69
1684109
91.41
... More
d) Lintel
66.2
6051
91.41
... More
e) Roof beam
5970.8
545790
91.41
... More
f) Roof Slab
12840
1173704
91.41
... More
g) Staircase
298.81
27314
91.41
... More
12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
... More
Ground Floor
2926.33
446849
152.7
... More
First Floor
648.81
101409
156.3
... More
16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
... More
Ground Floor
2738.48
598356
218.5
... More
First Floor
648.81
147604
227.5
... More
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
... More
Slab area
1022.7
173654
169.8
... More
Providing and laying 100mm uniform thick 'Tremix / VDF flooring' in basement floor with plain cement concret of M-30 grade (Minimum cement content 406 Kg/cum) in alternate panels of 4M x 3M using with 20mm and down grade black hard granite crusher broken stone chips including the cost of screed board vibrator, placing of filter mat, top mat,Vacum process, power troweling, brooming, T&P charges including power, loading, unloading and hire charges, making grooves of 6mm wide and 25mm deep @ 1.5 M C/C bothways, filling the joints with approved qunlity sealing compound '' Grade A'' including the cost of all materials, cost of labours, conveyance, royalty, labour ces, etc., complete as per the specifications and direction of Engineer -in-charge.
-
-
-
... More
Ground Floor
3661.78
2942237
803.5
... More
Providing and fixing Vitrified tile of specified size in floors on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) with neat cement slurry . finishing the joint with epoxy based water proof grout to match the shades of the tiles etc.including cost of all materials, labours & royalties, conveyance ,loading and unloading ,sundries ,T & P etc .complete as per the specification & direction of Engineer-in-charge. Size of tile 600x1200 mm
-
-
-
... More
Ground Floor
616.56
969965
1573.2
... More
First Floor
653.8
1035553
1583.9
... More
Providing and laying Vitrified skirting tiles 600x1200 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
... More
Ground Floor
43.14
72450
1679.3
... More
First Floor
23.81
40359
1695.4
... More
Providing and fixing 16mm thick Kota stone flooring (sample of Kota stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights.
-
-
-
... More
Ground Floor
127.65
142125
1113.4
... More
Providing and laying Matte Finish Vitrified floor tiles size 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
-
-
-
... More
Ground Floor
48.51
55194
1137.8
... More
GF
-
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x450or300x600 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of EIC. In all floors and all heights .
-
-
-
... More
Ground Floor
133.35
112840
846.2
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
-
-
-
... More
Ground Floor
90
64800
720
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
-
-
-
... More
Ground Floor
39.06
136799
3502.3
... More
Providing and fixing Aluminum Sliding Windows # Single Glazed (With MESH): Providing and fixing System Aluminum works for Sliding windows with 50mm & 35mm visible aluminum section width in the center mullion. The extruded aluminums sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. All Slider windows will be center locking. Integrated Anti-lift in slider panel, EPDM gaskets should be used in slider windows in all meeting points instead of Brush Pile. Frame width shall be 72 mm for 3 track (2 Glazed panels and 1 Mesh panel track provision) with +/- 2mm maximum tolerance. Provision of mesh track must be inbuilt in the offered system. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminum or on the surface treatment. The system should allow the application of glazing or panels with thickness up to 8mm. The external perimeter of aluminum sections should be Anodized with Tex guard coating, the system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. All Slider windows will be center locking
-
-
-
... More
Ground Floor
1.08
14491
13417.7
... More
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
-
-
-
... More
Ground Floor
29.16
1697
58.2
... More
Finishing surface of walls with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of scaffoding staging charges with cost of all materials,taxes,labour T&P etc complete
-
-
-
... More
Ground Floor
3761.18
229431
61
... More
First Floor
648.81
40550
62.5
... More
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over primer (two coat), by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, labour, all taxes, watering & curing T&P etc complete as per direction of Engineer -in-charge.
-
-
-
... More
Ground Floor
2926.33
450654
154
... More
First Floor
648.81
103550
159.6
... More
Providing and applying 2 coats of Plastic Emulsion Paint of approved quality and shade over a coat of putty & wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats,including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
3761.18
610062
162.2
... More
First Floor
648.81
107442
165.6
... More
Designing, providing, installing and fixing factory finished custom designed PEB STRUCTURE WITH LGSF SECTIONS super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The 50mm thick double skin PUF Insulated sandwich Roof Panel having core with Trapezodial Top & Micro-ribbed sheet in Bottom skin. The PUF panel shall be manufactured on continuous line running on uninterrupted power supply. Panel shall have pre coated Galvalume sheet on both side of Puf. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing type confirming to IS 12436 of 42 +/-2 Kg/m3. Top Sheet: 0.5mm TCT PPGL RMP sheet with 300 Mpa tensile strength with 150 GSM Coating. Bottom Sheet: 0.5mm TCT PPGL RMP sheet with 300 Mpa tensile strength with 150 GSM Coating.. LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lipin required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings, design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and316 at 500mm c/c with minimum embedment of 100mmin RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above.
4730.88
53449482
11298
... More
SECURITY BLOCK
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , , sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Upto 1.5 Mtr Depth
25.87
6008
232.3
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
17.24
1762
102.2
... More
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping site or as approved /directed by Engineer-in-charge, including all lead and lifts involved, labour, etc. including all taxes as per the direction of Engineer-in-charge.
8.62
2403
278.8
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
8.8
5400
613.8
... More
Providing and laying of Cement Concrete of grade 1: 4 :8(1 cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance, royalties and , sundries,T & P etc. complete as per the directions of Engineer-in-charge.
2.35
12429
5295.7
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
1.29
7306
5663.7
... More
Providing & applying of pre constructional anti-termite treatment Confirming to IS 6313 (Part-II) and creating chemical barrier under and around the column pits, wall trenches, basement excavation top surface of plinth filling, junction of wall and floors along with external perimeters of building, expansion joints, surrounding the pipes and conducts etc. at the rate at 7,5 liter per sqm on vertical surface and 5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction. Treatment at Junction of the inner wall and the floor ,Treatment of Top Surface of Plinth Filling , External Perimeter of building. (Make :- HI-Solution or Smart Care )
18
1987
110.4
... More
Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works as per IS Specification, including cost of required steel/wood/ply centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but excluding cost of Reinforcement and Binding wires etc.
-
-
-
... More
Foundation & Plinth
-
-
-
... More
Footing
3.09
20879
6763.8
... More
Plinth Beam
2.07
15701
7585.3
... More
Column upto plinth
0.78
11305
14587.4
... More
Ground Floor
-
-
-
... More
Column
1.59
23150
14587.4
... More
Roof Beam
1.5
21808
14587.4
... More
Roof Slab
2.99
39437
13180.9
... More
Lintel & Sill
0.69
9537
13822.6
... More
Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)
-
-
-
... More
Foundation & Plinth
6.97
63710
9140.7
... More
Ground Floor
9.89
90428
9140.7
... More
Flyash Brick Masonry in cement mortar of mix (1:6) using Flyash bricks of size 23 c.m x 11 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the Flyash bricks for 6 (Six) hours in water before use in works such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, stacking, loading, unloading, royalties and of all materials, cost of all labour, scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Foundation & Plinth
4.16
20778
4991.3
... More
Ground Floor
9.43
47403
5029.6
... More
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) with mixing of water proofing compound etc. including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
57.14
8724
152.7
... More
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) with mixing of water proofing compound etc. including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
95.34
20831
218.5
... More
Providing 6mm thick cement plaster with cement mortar of (1:4) with mixing of water proofing compound to RCC surface of roof slabs ceilings , stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading , all and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
12.9
2190
169.8
... More
Providing average 40mm thick grading Concrete with (1:2:4) using 12mm & down graded size black hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
12.9
8899
689.7
... More
Providing and fixing Vitrified tile of specified size in floors on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) with neat cement slurry . finishing the joint with epoxy based water proof grout to match the shades of the tiles,including 3 mm width or required spacer etc.including cost of all materials,labours,taxes & royalties, conveyance ,loading and unloading ,sundries ,T & P etc .complete as per the specification & direction of Engineer-in-charge.
-
-
-
... More
Size of tile 600x600 mm
-
-
-
... More
Ground Floor
13.32
15069
1131.6
... More
Providing & laying vitrified tile of specified size in skirting cut from approved make confirming to IS-15622 specifications over 12mm thick cement mortar (1: 3) to proper line and level to a height as per design including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles and complete as per the design & drawing with cost of all materials, labour, conveyance, taxes ,royalties,sundries and T&P etc. All complete as per the direction of Engineer -in-charge.
-
-
-
... More
Size of tile 600x1800 mm
-
-
-
... More
Ground Floor
2.91
3601
1237.7
... More
Providing & laying Granite in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
1.73
4716
2734.1
... More
Providing & laying granite in Skirting using 16-18 mm thick granite slab of approved quality, colour and size over 12 thick cement mortar (1:3) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
1.38
3937
2853.3
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM . All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following: 4 nos Hinges on each leaf 1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock 1 Set D-type pull handle back to back on each leaf 1 no Concealed flush bolt in inactive leaf of Double door, if any 1 no vision glass on each leaf Fastners as required. The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect. (Make :-Navir or Mangaldeep or Souradeep)
-
-
-
... More
Ground Floor
3.78
76431
20220
... More
System Aluminum Sliding Windows # Single Glazed (With MESH):Providing and fixing System Aluminum works for Sliding windows with 50mm and 35mm visible aluminum section width in the center mullion. The extruded aluminums sections should be made from Grade 6063-T5 and Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. All Slider windows will be center locking. Integrated Anti-lift in slider panel, EPDM gaskets should be used in slider windows in all meeting points instead of Brush Pile. Frame width shall be 72 mm for 3 track (2 Glazed panels and 1 Mesh panel track provision) with +/- 2mm maximum tolerance. Provision of mesh track must be inbuilt in the offered system. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminum or on the surface treatment.The system should allow the application of glazing or panels with thickness up to 8mm. The external perimeter of aluminum sections should be Anodized with Tex guard coating, the system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing and 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. All Slider windows will be center locking . (Make :- Tostem/ Reclad
3.24
45343
13995
... More
Supplying ,fitting and fixing of M.S. grill,M.S levoured ventiletors including cost of labour,material,transportation etc.
-
-
-
... More
Ground Floor
87.16
5072
58.2
... More
Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work of steel over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
3.24
708
218.8
... More
Finishing surface of walls with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of scaffoding staging charges with cost of all materials,taxes,labour T&P etc complete
-
-
-
... More
Ground Floor
70.04
4272
61
... More
Wall painting with two or more coats of premium acrylic emulsion paint (Two or more coats ) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including cost, coveyance, loading and unloading, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
70.04
11360
162.2
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat (Two or more coats ) of exterior primer applied @ 0.90 litre/10 sqm
-
-
-
... More
Ground Floor
106.38
16382
154
... More
INTERNAL WATER SUPPLY & SANITATION WORKS
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
... More
50 mm dia
70
81130
1159
... More
40 mm dia
16
11968
748
... More
32 mm dia
16
8864
554
... More
25 mm dia
46
17526
381
... More
20 mm dia
50
13950
279
... More
Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge
-
-
-
... More
50mm dia CPVC ball valve
8
20296
2537
... More
40mm dia CPVC ball valve
4
6192
1548
... More
32mm dia CPVC ball valve
2
2148
1074
... More
Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete
-
-
-
... More
15mm to 32mm dia pipe
96
18912
197
... More
Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
-
-
-
... More
Water Closet Complete set -WC (Wall mounted Water Closet- JAQUAR FLS-WHT-5953JPPSM/Equivalent), Single Piece Slim Concealed Cistren with Floor Mounting Frame,installation Kit and S Type Drain Pipe Connection set For wall hung WC (Without Flush control plate) - JAQUAR JCS-WHT- 2400FS /Equivalent , FLUSH PLATE- JAQUAR JCP-CHR- 852415/ Equivalent
6
131662
21943.8
... More
Water Closet Complete set -WC (Wall mounted Water Closet- JAQUAR FNS-WHT-40953UF/Equivalent), Single Piece Slim Concealed Cistren with Floor Mounting Frame,installation Kit and S Type Drain Pipe Connection set For wall hung WC (Without Flush control plate) -JAQUAR JCS- WHT- 2400FS /Equivalent , FLUSH PLATE- JAQUAR JCP-CHR-852415 /Equivalent
18
492206
27344.8
... More
Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe including painting of fittings and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
... More
Under Counter wash basin Complete set ( Under Counter wash basin- JAQUAR -FNS-WHT-407015/ Equivalent) , Bottle trap JAQUAR ALD-769L 300X 190/Equivalant, JAQUAR ALD-CHR-709/Equivalant.
28
164192
5864
... More
Providing and fixing white vireous china urinal set with Installation Box with Control Cock with 175mm Long wall Connection,including painting of fitting and brackets,cutting and making good the walls and floors wherever required as per the dirctions of Engineer-in-charge Urinal- JAQUAR URINAL WITH FIXING ACCESSORIES SET SIZE (JAQUAR URS-WHT-13257)/ Equivalent Sensor Concealed Type Flushing Valve for Western Commode Complete Set with Provision for Manual Operation Also (Battery Operated) Rs (JAQUAR SNR-STL-51093N /Equivalent ),Bottle trap JAQUAR ALD-769L300X190/Equivalant, , JAQUAR ALD-709/Equivalant, Urinal spreader bowl Top inlet 15mm with fixing stud (Jaquar ALD-1043/Equivalent)
10
178730
17873
... More
Providing& fixing 8mm thick frosted glass partition for urinal with patch fitting, clams etc including cost of all labour,material, sundries and all chrome hardware fitting etc all complete as per the direction of Engineer-in-charge. ( JAQUAR JSE-CHR-110US450X / Equivalent /Equivalent)
10
52690
5269
... More
Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours, materials, conveyance, loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge.
-
-
-
... More
Pillar Cock With Long neck with aerator (JAQUAR FLR-5015/Equivalent)-Common
28
46340
1655
... More
Twoway Bib cock jaquar FLR-5041N/Equivalent )-Common
24
47592
1983
... More
Angle Valve (JAQUAR FLR-5053N/Equivalent),-Common
62
67394
1087
... More
Health Faucet (JAQUAR ALD 573 /Equivalent)
24
32760
1365
... More
Toilet roll holder with stainless steel Flap (JAQUAR ACN-1153S/ Equivalent )-Common
24
29256
1219
... More
Soap Dish (JAQUAR ACN-1131N/Equivalent)-common
24
19800
825
... More
Soap Dispenser (JAQUAR ACN-1135N/Equivalent)-common
28
38780
1385
... More
Towel Ring (JAQUAR ACN-1121N/Equivalent)
16
18672
1167
... More
TOWEL RAIL (JAQUAR ACN-1111SM/Equivalent)
24
33480
1395
... More
GLASS SHELF (JAQUAR ACN 1171N/Equivalent)
28
38836
1387
... More
Double coat Hook (JAQUAR ACN 1161N/Equivalent)
24
12360
515
... More
Bathroom mirror 600x600 mm
28
39017
1393.48
... More
CP Flange small
86
2401
27.93
... More
110mm dia pvc nahani trap without jally
62
8218
132.55
... More
CP extension piece
114
12675
111.19
... More
CP Grating
62
2969
47.89
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes.
-
-
-
... More
110MM OD P.V.C SWR S/S PIPE(ISI TYPEA)
84
32398
385.7
... More
Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains, screws, wooden cleant, pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC
-
-
-
... More
75mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)
42
14834
353.2
... More
110mm dia OD PVC SWR S/S PIPE (ISI TYPE-B)
372
192647
517.87
... More
110mm p.v.c s/j with door
24
5490
228.77
... More
110mm p.v.c swr plain bend 87.5
24
3360
140.03
... More
110mm pipe clip
620
15456
24.93
... More
110mm dia p.v.c vent cowl
4
137
34.45
... More
110mm dia p.v.c swr coupler
62
5695
91.87
... More
110mm dia p.v.c Y with door
62
25583
412.64
... More
110x110x110 mm dia pvc swr Tee
62
12192
196.66
... More
Supplying and fixing Aquaguard Storage Cooler#Cum-Purifier (80 Ltr. Capacity ) with all cost complete.
2
191057
95528.73
... More
Providing and fixing Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor including all cost of labour, material, testing, transporatation etc all complete as per the direction of Engineer-in-charge. ( Jaquar HDR-SSF-AK2803D/ Equivalent )
4
38388
9597.14
... More
Providing and fixing Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted etc. including all cost of labour, material, testing, transporatation etc all complete as per the direction of Engineer-in-charge.
4
30317
7579.28
... More
Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change.
-
-
-
... More
With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm)
8
22089
2761.2
... More
Constructing brick masonary road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with precast R.C.C. vertical grating complete as per standard design Including all cost of labour, material, T&P etc. all complete as per the direction of Engineer-in-charge.
12
57192
4766
... More
Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge.
-
-
-
... More
Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets.
8
46908
5863.5
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
108.95
28130
258.2
... More
Supplying, laying, jointing,fitting and fixing, testing and commission-ing uPVC foam core structured pipes confirming to IS certification with SN4 or SN8 Solvent Cement joints with or without rubber ring for Soil Pipes and coupler complete for external sewerage system, including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement.including cost of all labours, materials, conveyance, loading and unloading, all taxes and sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
160 mm dia UPVC S/S SN-8 Foam Core Pipe
108.95
144967
1330.59
... More
Supplying all material, labour, T & P and necessary toward laying of RCC NP2 hume pipe push-on joint including cost R.C.C hume pipe push on type rubber gasket laying in proper slope & gradient lowering the pipe to trench with required plastic rope without damage to the pipe & fitting with selected excavated material after laying the pipe complete etc. including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
200 mm dia. R.C.C. pipe S/S NP2
108.95
65424
600.5
... More
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification .
108.95
45693
419.4
... More
EXTERNAL WATER SUPPLY SYSTEM
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc, not exceeding 80 mm dia.
361.54
57159
158.1
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
36.15
15690
434
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient .including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge
325.38
199720
613.8
... More
Providing and laying Chlorinated Polyvinyl Chloride (CPVC) pipes & specials in trenches conforming to IS:15778 including all CPVC plain & brass threaded fittings like bend, tees, reducer etc, jointing by solvent cement with non heating process. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm dia CPVC SCH-80 Pipe
288.29
283824
984.5
... More
63 mm dia CPVC SCH-80 Pipe
73.25
49989
682.5
... More
Supplying all material, labour, T & P and necessary toward laying of RCC NP2 hume pipe push-on joint including cost R.C.C hume pipe push on type rubber gasket laying in proper slope & gradient lowering the pipe to trench with required plastic rope without damage to the pipe & fitting with selected excavated material after laying the pipe complete etc. including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
100 mm dia. R.C.C. pipe S/S NP2
216.92
76551
352.9
... More
Providing & fitting fixing cast iron sluice valve with double flange ends for water work purpose conforming to IS -2685-1974 for the following rating & nomimal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia C.I D/F sluice valve with hand wheel (PN-10)
6
47324
7887.4
... More
Providing & fitting fixing cast iron non return valve with double flange ends for water works purpose conforming to I.S: 2685-1971 for following rating & nominal diameter as per specification including cost of all labours, materials, conveyance, loading and unloading, all taxes, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia C.I D/F non return valve
2
22092
11046
... More
Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.including cost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
80 mm dia
2
19368
9684
... More
Providing flanged joints to PVC. pipes and specials, including testing of joints : including cost of all labours, materials, conveyance, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
For 80 mm diameter pipe
2
487
243.55
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
6
79278
13213
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
28388
7097
... More
Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge. (Sintex/Equivalent)
20000
266000
13.3
... More
10000 Ltr Capacity-2Nos
-
-
-
... More
Supplying and fixing structural steel framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc as required In frames and similar works as per the shop drawing submitted by contractor & approved by EIC including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
4160
390208
93.8
... More
EXTERNAL SEPTIK TANK & SOAKPIT
-
-
-
... More
Septic tank
-
-
-
... More
Earth work in excavation by manual / mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
71.37
16578
232.3
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
3.31
2032
613.8
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
3.31
18752
5663.7
... More
Providing and laying of Cement Concrete of grade 1: 2 :4 (1cement : 2 sand : 4 graded 12mm size hard granite chips ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period ..including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge
1.18
8328
7051.9
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance, royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge..
15.37
1571
102.2
... More
Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips including the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc .complete.
-
-
-
... More
Base slab
8.26
55841
6763.8
... More
Wall
12.31
124079
10079.6
... More
Slab
3.25
42837
13180.9
... More
Providing, fixing in position TMT/ Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of materials, conveyance and taxes of steel and binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
21.75
198828
9140.7
... More
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
93.45
15867
169.8
... More
Providing and fixing SFRC Manhole cover with frame 500 x 500 mm
2
4626
2313.2
... More
Soak Pit
-
-
-
... More
Earth work in excavation by manual / mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
13.29
3086
232.3
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
0.42
254
613.8
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
0.3
1710
5663.7
... More
Honey comb masonry with 25cm ×12cm ×8cm size Kiln burnt bricks having crushing strength not less than 75 kg/cm2 Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
18.84
20473
1086.7
... More
Supplying, filling, spreading of dry brick khoa of size range 4 cm in soak pit, etc. including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
5.3
1692
319.4
... More
Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips including the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc .complete.
-
-
-
... More
Roof slab
0.47
6247
13180.9
... More
Providing, fixing in position TMT/ Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of materials, conveyance and taxes of steel and binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
0.43
3903
9140.7
... More
PARKING AND DRIVEWAY
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments ,sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
856.58
121369
141.69
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.
18.89
1930
102.2
... More
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping site or as approved /directed by Engineer-in-charge, including all lead and lifts involved, labour, etc. including all taxes as per the direction of Engineer-in-charge.
894.94
249510
278.8
... More
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
88.81
54514
613.8
... More
Providing and laying of Cement Concrete of grade 1: 4 :8(1 cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
38.17
202136
5295.7
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
266.44
730583
2742
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
331.43
951581
2871.13
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018
1776.29
1080691
608.4
... More
Supplying and fixing of precast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make ,design,colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984
848.23
705579
831.83
... More
PARKING AND DRIVEWAY
-
-
-
... More
Earth work in excavation by manual / mechanical means in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Upto 1.5 Mtr Depth
309.67
71935
232.3
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and sundries ,T & P, complete as per the directions of Engineer-in-charge.
102.2
10444
102.2
... More
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means within 1km Lead away from the site, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge.
207.5
57851
278.8
... More
Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
24.77
15205
613.8
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance,royalties and sundries , T&P etc. complete as per the direction of Engineer-in-charge.
37.16
210457
5663.7
... More
Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability, including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc.complete as per the design and direction of Engineer-in-charge.
-
-
-
... More
Footing
37.16
251336
6763.8
... More
Wall
41.29
416166
10079.6
... More
slab
28.9
380954
13180.9
... More
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials, conveyance, T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge.
65.24
596302
9140.7
... More
ELECTRICAL WORKS
-
-
-
... More
W I R I N G
-
-
-
... More
(Colour Code of wires to be strictly maintained)
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
First Point
-
-
-
... More
(Group B)
76
73644
969
... More
Group C
60
72180
1203
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class FRLS PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (80W Light & 6A PP wiring)
450
85950
191
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (SB,Comp,16A PP Wiring)
1050
237300
226
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (AC wiring)
200
54800
274
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
50
22000
440
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
80
28800
360
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
60
37080
618
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
20
16480
824
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
200
223800
1119
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
30
1170
39
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
200
21000
105
... More
25 mm
300
35700
119
... More
Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess with phenolic laminated sheet cover including painting etc as required.
-
-
-
... More
75 mm X 75 mm X 60 mm deep
35
5110
146
... More
100 mm X 100 mm X 60 mm deep
22
3762
171
... More
150 mm X 75 mm X 60 mm deep
12
2124
177
... More
200 mm X 125 mm X 60 mm deep
6
1590
265
... More
200 mm X 150 mm X 60 mm deep
10
2910
291
... More
200 mm X 250 mm X 60 mm deep
10
3840
384
... More
Supplying and fixing 3 mm stainless steel cover on the floor junction box including fabrication, with suitable stinless steel screws, etc as reqd.
100
2200
22
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1-2 Module
12
2928
244
... More
3 Module
10
2680
268
... More
6 Module
2
660
330
... More
8 Module (Computer board)
18
6696
372
... More
12 Module (Server/BMS)
2
898
449
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate, switch box etc. as required.
-
-
-
... More
5/6 amps switch
55
4620
84
... More
15/16 amp switch
2
256
128
... More
3 pin 5/6 amp socket outlet
76
7600
100
... More
6 pin 15/16 amp socket outlet
2
324
162
... More
Telephone socket outlet
1
121
121
... More
TV antenna socket outlet
1
121
121
... More
Ceiling rose
12
852
71
... More
Bell push
1
115
115
... More
AC starter, 25A, 2 Module, 240V
4
2096
524
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1
303
303
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
825
33
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
40
19680
492
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
100
61100
611
... More
Erection of wall bracket /ceiling LED fittings of all sizes and shapes containing upto two GLS lamps/6-20W LED per fitting, complete with all accessories including connection etc. as required.
233
22834
98
... More
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
1
90
90
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
1
81
81
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
20
3380
169
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 100 cm length, or with chain hook/suspender arrangement, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
280
108080
386
... More
Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
35
6125
175
... More
Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
6
2214
369
... More
SDB'S, MCB, ISOLATOR, PANELS
-
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
1
6160
6160
... More
Supplying and fixing following way, sheet steel, MCB distribution board, 415/240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
-
-
-
... More
4 way (4 + 12), Double door TPN, Horizontal
4
13420
3355
... More
6 way (4 + 18), Double door TPN, Horizontal
9
36711
4079
... More
8 way (4 + 24), Double door TPN, Horizontal
2
9786
4893
... More
6 way , Double door, SPN
3
5427
1809
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, 10kA miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
-
-
-
... More
Single pole
244
51240
210
... More
Single pole and neutral
1
491
491
... More
Triple pole
1
826
826
... More
Four Pole
1
1007
1007
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
12
96
8
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
1
795
795
... More
63 amps
1
848
848
... More
100 amps
1
1006
1006
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
1
2121
2121
... More
40A
5
11775
2355
... More
63 amps
12
28260
2355
... More
Supplying and fixing following rating,DP (Single phase and neutral), 240 volts, residual current circuit breaker RCCB having a sensitivity current of 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps
1
1663
1663
... More
40 amps
1
2166
2166
... More
63 amps
1
2232
2232
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
45
59805
1329
... More
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
12
40416
3368
... More
CABLE AND CABLE TRAY
-
-
-
... More
Supplying and installing following size of MS cable trays with powder coating paint of approved colour & with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
60
26700
445
... More
200 mm width X 50 mm depth X 1.6 mm thickness
30
16950
565
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
12740
637
... More
Supplying and installing following size of perforated MS cable tray bends with powder coating paint of approved colour) & with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
12
8544
712
... More
200 mm width X 50 mm depth X 1.6 mm thickness
6
6036
1006
... More
300 mm width X 50 mm depth X 1.6 mm thickness
4
4716
1179
... More
Supplying and installation of Ladder type MS cable trays with synthetic enamelpaint of approved colour & with convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (Design to be approved by Engineer in charge)
100
14300
143
... More
Cables MV
-
-
-
... More
Supplying the following Size PVC/ XLPE insulated PVC seathed Alluminium aromour cable of 1.1 kV as per IS 1554 etc as reqd.
-
-
-
... More
a) 2 core 4 sq.mm, Alluminium
30
3510
117
... More
a) 2 core 6 sq.mm, Alluminium
400
61600
154
... More
b) 4 core 10 sq.mm, Alluminium
5
1200
240
... More
c) 4 core 16 sq.mm, Alluminium
30
8640
288
... More
d) 3 1/2 core 25 sq.mm, Alluminium
5
1660
332
... More
e) 3 1/2 core 35 sq.mm, Alluminium
5
2000
400
... More
f) 3 1/2 core 50 sq.mm
30
16170
539
... More
g) 3 1/2 core 70 sq.mm
30
21570
719
... More
h) 3 1/2 core 150 sq.mm, Alluminium
30
34200
1140
... More
i) 3 1/2 core 185 sq.mm, Alluminium
120
158280
1319
... More
j) 3 1/2 core 300 sq.mm, Alluminium
5
8465
1693
... More
Supplying the following Size PVC/ XLPE insulated PVC seathed Alluminium/copper un-aromour cable of 1.1 kV as per IS 1554 etc as reqd.
-
-
-
... More
a) 4 core 4 sq.mm, copper
45
15075
335
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
50
1850
37
... More
b) above 35 sq. mm and upto 95 sq.mm (clamped with 1mm thick saddle)
30
2250
75
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
... More
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
40
1800
45
... More
b) above 35 sq. mm and upto 95 sq.mm (clamped with 1mm thick saddle)
5
535
107
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
a) Upto 35 sq. mm
380
8740
23
... More
b) above 35 sq. mm and upto 95 sq.mm.
10
370
37
... More
c) above 95 sq. mm and upto 185 sq.mm
90
4680
52
... More
d) above 185 sq. mm and upto 400 sq.mm
5
470
94
... More
Supplying and making end termination with double brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required.
-
-
-
... More
a) 2 core 6 sq.mm, Alluminium
150
29550
197
... More
b) 4 core 10 sq.mm, Alluminium
2
442
221
... More
c) 4 core 16 sq.mm, Alluminium
2
506
253
... More
d) 3 1/2 core 25 sq.mm, Alluminium
2
452
226
... More
e) 3 1/2 core 35 sq.mm, Alluminium
2
576
288
... More
f) 3 1/2 core 50 sq.mm
2
678
339
... More
g) 3 1/2 core 70 sq.mm
2
768
384
... More
h) 3 1/2 core 150 sq.mm, Alluminium
2
1144
572
... More
i) 3 1/2 core 185 sq.mm, Alluminium
12
8616
718
... More
j) 3 1/2 core 300 sq.mm, Alluminium
2
1960
980
... More
Supplying and laying 25 x 5 GI flat along with cables in exsting surface/ cable trench including making connection for loop earthing as reqd.
150
25350
169
... More
Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all level for panel plinth with neat plastering the surface as reqd.
5
28215
5643
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc. in the existing trench, complete as required including the cost of material ,labor T & P as required as EIC.
-
-
-
... More
63 mm dia (OD -63mm & ID- 51mm nominal)
200
40600
203
... More
120 mm dia (OD -120mm & ID- 103mm nominal)
50
15100
302
... More
Providing, laying and fixing following dia RCC pipe NP4 class (heavy duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (1.2 mtr deep) and refilling etc as required.
-
-
-
... More
250 mm dia
70
56000
800
... More
300 mm dia
60
56100
935
... More
Earthing for PANELS & Computer
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
20
122540
6127
... More
Earthing with COPPER earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
45388
11347
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
10
12720
1272
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
60
57180
953
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)( With excavation and refilling)
360
42480
118
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe (with supply of pipe)from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
40
23160
579
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for loop earth connections along with cables etc. as required.
40
8000
200
... More
Supply & fixing of 400 x 50 x 6 mm GI busbar with suitable insulator,nut & bolts & all other materials as required as per EIC.
10
9840
984
... More
Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required.
4
3000
750
... More
SAFETY
-
-
-
... More
Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
452
226
... More
Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with suitable pedastal arrangement for each transformer sub-station yard etc as reqd.
1
1150
1150
... More
Supplying and Laying 12 mm thick rubber mat of ISI marked and of approved etc as reqd.
3
4695
1565
... More
Supplying and fixing shock treatment chart bonded with glass frame of bigger size on the existing surface with suitble clamp /hook arrangement etc as reqd.
1
650
650
... More
Supplying and fixing First aid box with required first aid for the panel room in all floors as reqd.
1
1050
1050
... More
Supplying 11 kV class hand gloves as reqd.
1
850
850
... More
Panels
-
-
-
... More
Design, supply, installation, testing and commsioning of cubicle main panel for indoor/Outdoor installation of wether prrof design as per IP 54 class, made out of 2 mm thick CRCA sheet as per the drawing with cubicle type inernal arrangement of 2.0 mm thick sheet and with front & back opening system suitable for mounting following switch gears, busbars, metering unit, including painting with powder coated paint of approved colour and shed with earthing the body etc as reqd. (Drawing shall be approved by engineer -in charge/Consultant)
-
-
-
... More
Sub Stationl Board = (Outdoor Floor mounted type-)
1
231250
231250
... More
Incommer:- 01 no. 400A., 25KA FP MCCB with OL/SC/EF Protection,1nos 100A,FP,25KA, MCCB
-
-
-
... More
Busbar:- 04 nos. 500A. Al. bus bar duly sleeved.
-
-
-
... More
O/G-) 32A SPN10KA MCB-1nos
-
-
-
... More
O/G-) 3nos 250A,FP,25KA, MCCB
-
-
-
... More
O/G-) 1nos 315A,FP,25KA,
-
-
-
... More
Instrument:- i) 1sets of 03 nos. phase indicating lamp with control fuse
-
-
-
... More
ii) 01 Set of (0-400)A Digital Ameter with CT & PT,500V Voltmeter
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Main Pnel Board = (Indoor Floor mounted type-)
1
430600
430600
... More
Incommer:- 02 no. 315A., 25KA FP MCCB
-
-
-
... More
Busbar:- 04 nos. 400A. Al. bus bar duly sleeved.
-
-
-
... More
Incommer:- 315A FP O/L C/O switch, 315A FP Contactor with relay for auto manual ,A/M switch for indication.,1nos 32A FP 32A MCB with 65KA FP SPD
-
-
-
... More
O/G-) 40 / 63A,FP, 10KA, MCB-11nos
-
-
-
... More
O/G-) 4nos 125A,FP,25KA, MCCB
-
-
-
... More
O/G-) 2nos 100A,FP,25KA, MCCB, 2nos 315A,FP,25KA, MCCB
-
-
-
... More
O/G-) 3nos 63A,FP,25KA, MCCB
-
-
-
... More
O/G-) 32FP MCB-2nos,32 2P MCB-5nos,
-
-
-
... More
Instrument:- i) 2sets of 03 nos. phase indicating lamp with control fuse
-
-
-
... More
ii) 01 Set of (0-400)A Digital MFM
-
-
-
... More
(Duly factory wired)
-
-
-
... More
100KVAR APFC Pnel Board = (Indoor Floor mounted type-)
1
370600
370600
... More
External Light Panel Board = (Outdoor Floor Mounted type-)
1
29500
29500
... More
Incommer:- 01 no. 63A., 16KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 100A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)32A FP ,10KA, MCB-2nos ,
-
-
-
... More
10-16A SPN ,10KA, MCB-6nos
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of 0-500V Voltmeter
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Machine Panel Board(Type-1) = (Intdoor Wall Mounted type-)
1
67500
67500
... More
Incommer:- 01 no. 100A., 25KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 150A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)32A-63A FP ,25KA, MCCB-4nos ,
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of (0-100)A Digital MFM
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Machine Panel Board(Type-2) = (Intdoor Wall Mounted type-)
1
73500
73500
... More
Incommer:- 01 no. 125A., 25KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 200A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)32A-100A FP ,25KA, MCCB-4nos ,
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of (0-125)A Digital MFM
-
-
-
... More
(Duly factory wired)
-
-
-
... More
DG Panel Board = (Outdoor Floor Mounted type-)
1
170575
170575
... More
Incommer:- 01 no. 400A., 25KA FP MCCB ,
-
-
-
... More
Busbar:- 04 nos. 500A. Al. bus bar duly sleeved.
-
-
-
... More
Outgoing:-i)02 no. 315A., 25KA FP MCCB
-
-
-
... More
01 no.250A., 25KA FP MCCB
-
-
-
... More
Instrument:- i) 03 nos. phase indicating lamp with control MCB
-
-
-
... More
ii) 01 Set of 0-500V Voltmeter
-
-
-
... More
(Duly factory wired)
-
-
-
... More
Fitting and Accessories- Internal
-
-
-
... More
Supply, Installation, Testing, and commissioning of Exhaust fan of following size (dia) suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers in the existing opening, making good the damage, connections,etc as required.(Make-Usha/Havells/RR/Hallonix)
-
-
-
... More
a) 300 mm Dia ( Toilet) Industrial
6
12870
2145
... More
b) 450 mm Dia
10
69500
6950
... More
SITC of 1200mm sweep ,BEE 5 star rated,ceilling fan with Brush Less Direct Current (BLDC) Motor,Class of insulation: B,3 nos. blades, 30cm long down rod, 2 nos. canopies,shackle kit,safety rope copper winding,power factor not less than 0.9,service Value (CMM/W) minimum 215 CMM,350RPM(tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories i/c safety pin,nut bolts,washers,temperature rise=75 degree C(max.) insulation,resistance more than 2 mega ohm,suitable for 230V,50Hz,Single phase AC Supply,earthing etc. complete as required.(Make-Usha/Havells/RR/Hallonix)
35
95550
2730
... More
Supplying & Fixing of energy effiecient 400 mm sweep ceiling/ wall mounted fan of approved make etc complete as reqd.(Make-Usha/Havells/RR/Hallonix)
60
202200
3370
... More
Supply, Testing & commissioning of surface/ recess type energy efficiency White LED fiting 2ft x 2ft mm, suitable for 33-36 watt (Min. 110lm/Watt), BIS marked, 6000K confirming to LM-80 catagory of approved make etc as reqd.(Make-Wipro/Philips/Hallonix/Jaquar/Havells)
27
115290
4270
... More
Supply, Testing & commissioning of recess mounted energy efficiency White LED down lighter suitable for following LED confirming to LM-80 catagory with a special diffuser of approved make etc as reqd. (Make-Wipro/Philips/Hallonix/Jaquar/Havells)
-
-
-
... More
a) 15 Watt Square/round (Model LD80 of Wipro/SS make of Philips /Halonex )
4
6724
1681
... More
b) 12 Watt Square/round (Wipro/Philips or Similar Superior make)
72
94104
1307
... More
e) LED BH fitting suitable for 9W-12 LED lamp with lamp LW07 of Wirpo or Similar Superior make
24
34800
1450
... More
Supply, Testing & commissioning of surface type energy efficiency linier recessed Down lighter, Glare free, tiltable, with 12 watt LED BIS CERTIFIED, of approved make etc as reqd.(Make-Wipro/Philips/Hallonix/Jaquar/Havells)
76
114000
1500
... More
Supply, Testing & commissioning of surface type energy efficiency LED tube light Box type fitting suitable for 1 x 18/20 watt LED lamp (with lamp) of approved make etc as reqd. (Make-Wipro/Philips/Hallonix/Jaquar/Havells)
20
15000
750
... More
Supply, Testing & commissioning of suspended type IP-40 energy efficiency LED Linear Idustrial batten glare free,diffused light including 1 x 40 watt LED lamp (with lamp) of approved make etc as reqd. (Make-Wipro/Philips/Hallonix/Jaquar/Havells)
280
478800
1710
... More
Fitting and Accessories- external
-
-
-
... More
Supply inspection testing & Commissioning Mild
Steel Tubular stepped Pole, Mild Steel Bracket , Stainless screws, Corrosion & UV ray resistant coating.. of 9000mm height,(dia - 140-114-89)mm with single Arm of 1000 mm of same make along with J Bolts & nuts,Base plate. The pole should have 6 Amps 10 KA SP MCB connectors suitable for 6 / 16 sqmm cable
termination complete with DIN bar, shooting Links,
end lock etc as required and 3c x 2.5 sqmm double
PVC insulated summer sable copper conductor
cable with junction box to the luminaries completely
including terminations with insulated copper lug
etc. & Base with PCC Masonry work(450x450x900)mm for the above pole as per EIC of approved make including the cost of labor & material T & P as required as EIC. Note- The GA & structure drawing of pole shall be approved by EIC before Fixing.
(Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
15
765840
51056
... More
Supply inspection testing & Commissioning Mild
Steel Tubular stepped Pole, Mild Steel Bracket , Stainless screws, Corrosion & UV ray resistant coating.. of 9000mm height,(dia - 140-114-89)mm with double Arm of 1000 mm on both side of same make along with J Bolts & nuts,Base plate. The pole should have 6 Amps 10 KA SP MCB connectors suitable for 6 / 16 sqmm cable termination complete with DIN bar, shooting Links,
end lock etc as required and 3c x 2.5 sqmm double
PVC insulated summer sable copper conductor
cable with junction box to the luminaries completely
including terminations with insulated copper lug
etc. & Base with PCC/RCC Masonry work(450x450x900)mm for the above pole as per EIC of approved make including the cost of labor & material T & P as required as EIC. Note- The GA & structure drawing of pole shall be approved by EIC before Fixing.
(Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
2
108078
54039
... More
Supply, Installation,Testing & commissioning of IP-66 Rating following LED street light housing made of die-cast aluminium with street optic lens for unifom light mounted on the existing 8000mm Pole including nut,bolts etc including the cost of labor & material T & P as required as EIC. (Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
-
-
-
... More
110W Street Light(4000K)
19
161500
8500
... More
Providing and fixing black painted galvanized decorative post with built in loop box with MCB suitable for fixing following LED/CFL decorative light fitting, including driver for yard illumination as reqd,making connection with suitbale size copper wire/ lugs and sockets, earthing, making testing commissiong etc as reqd. including civil work as required also including the cost of material ,labor T & P as required as EIC . (As desired by Engineer in charge)
-
-
-
... More
a) Lighting pole of(Single Bracket)3660mm Ht including 24W LED lamp,base,Nut & Bolts ,Single Bracket etc (Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
6
145320
24220
... More
b) Lighting pole of (Double Bracket)3660mm Ht including 2x24WLED lamp,base,Nut & Bolts ,Double Bracket- (Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
2
54440
27220
... More
c) Post Top Lighting pole of 2980mm Ht including 30WLED lamp Clear Polycarbonet ,base,Nut & Bolts -((Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
2
70440
35220
... More
d)LED bush & spike luminair 6 watt with extruded alluminium housing and adjustable mounting bracket with lamp(Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
12
57240
4770
... More
e)Copper dust painted die cast alluminium post top suitable for 30watt LED lamp with Driver for outdoor installtion(Gate light) (Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite) (Gate light)
4
52272
13068
... More
f) 8W ,Bollard of 475 mm ht. x 100 mm dia suitable for 8 watt LED with lamp(Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite)
10
53000
5300
... More
g)Under water fountain light suitable for 9 x 2 watt (Make-Homdec /Passolite /Bajaj/HAVELLS/Halonix/K-Lite) -IP-77
2
72280
36140
... More
Reciving, erection, installation & commissioning of Stainless Steel automatic Air Turbo Ventilators of 24” dia with FRP Base Plate including all other acessories & Labour.
20
170000
8500
... More
Lightning Arrestor
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
14
7252
518
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
75
8475
113
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
80
10080
126
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
80
15760
197
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
484
121
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
50
9750
195
... More
S/F 50 mm dia Light duty GI pipe, 3 mtr long in ground for protection of GI conductor etc as reqd.
4
8232
2058
... More
Data Networking, WIFI, CCTV, IP-PBX Work, Access Control System (Wiring only)
-
-
-
... More
Supply and laying of Cat6 4-pair 23AWG UTP Cable in the existing ISI marked PVC conduits for data and voice,CCTV & access Control including the cost of labor & material T & P as required as EIC.(Make: Tyco/ Legrand/ Digisol)
2000
150000
75
... More
Supply, installation and commissioning of RJ-45Jack of Category 6 with Single-port British-style Face plate 86x86 mm with Curveture and Wall Mout Box l(G.I/PVC) , to be fixed in concealed manner in partition/wall by necessary bolts & nuts including the cost of labor & material T & P as required as EIC.( Make: Tyco/ Legrand/ Digisol)
50
31500
630
... More
TRANSFORMER
-
-
-
... More
Supply, installtion, testing, commissiong of the following capacity 11 /0.433 KV, 50 Hz, 3phase, Oil cooled transformer suitable for out door type installation on plinth, with first filling of oil and with LV cable end box, fitted with off load tap changer, HV indoor type isolaor/ load break switch, HT fuse, HV link Chamber, provision for LT MCCB with IP54 class enclosure and as per detailed specification attached as per IS-1180,2014.
-
-
-
... More
a) 250 kVA, 11/0.433 KV, Copper Wound Level-II (+5% to -10%) with off load tap changer
1
825000
825000
... More
SITC of 2P structure with RS joist pole 11 mtr length & all other acessories as required for installation of 1nos 250KVA Transformer including 1 Sets of 400A AB Switch,HG Fuse,LA(5KA),Insulators (Disc/Pin)as required,earthings(Neutral with copper Plate & Body , with GI plate)with chamber,danger Board,Fire Bucket,Hand Gloves, fencing as per approve drawing with 6' gate,spreading 40mm gravells upto 100mmm height,Isolator Panel including all civil works as required size ,including Liosioning & inspection for both HT & LT side as per EIC & all other materials & labour as required AS per EIC or TPCODL).
1
425000
425000
... More
Construction of OH line of using 70mm2 AAAC conductor including all other materials & labour as required as per EIC.(40mtr/span)
5
335000
67000
... More
Supply, Installation, Testing and Commissioning of Intelligent Addressable Fire Detection and Alarm System
-
-
-
... More
CONTROL EQUIPMENTS:
-
-
-
... More
32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 2 Loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 320 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have (minimu 240 Devices) atleast 126/99 addressable detectors and addressable devices with up to 2.0 km loop length, . with 12V battery back up for 30 Minutes and battery charger in built .
Make: Siemens/Honeywell (Notifier)/ or Similar Superior (UL/EN approved)
1
239225
239225
... More
DETECTORS & OTHER MODULES
(MAKE - ATEIS/Honeywel/Siemens)
-
-
-
... More
Supplying and fixing Intelligent Addressable type photo thermal detector with base for use smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.Including all materials,labour,taxes (excluding GST) etc as required as per direction of EIC.
140
400120
2858
... More
Supplying and fixing Intelligent Addressable type HEAT detector with base for use as heat with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong, materials, labour, taxes etc as required as per direction of EIC.
35
95410
2726
... More
Sypplying and fixing Intelligent Addressable Manual Call Point i/c testing and commissiong etc as reqd.Including all materials, labour, taxes etc as required as per direction of EIC.
10
38710
3871
... More
S/F Addressable Loop sounder with strobe interface module, power supply for sounder and programmable by software having operating temperature -10⁰C to + 55⁰C etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
10
35060
3506
... More
S/F Analogue Addressable Control module with IP66 casing containing two relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.
2
6006
3003
... More
S/F Analogue Addressable Monitor module with IP66 casing containing four relay inputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. Including all materials,labour,taxes etc as required as per direction of EIC.
2
4800
2400
... More
S/F Addressable phone control module with IP66 casing etc complete as reqd.
1
3267
3267
... More
S/F fire fighter telephone handset etc complete as reqd.
1
5740
5740
... More
S/F fire fighter phone jack etc complete as reqd.
2
3200
1600
... More
S/F Duel LED Response Indicator (LOCAL).Including all materials,labour,taxes etc as required as per direction of EIC.
6
1656
276
... More
CABLE & WIRING ACCESSORIES
-
-
-
... More
S/F 3"/3" JB for mounting of detectors & other accessories with necessary fittings.Including all materials, labour, taxes etc as required as per direction of EIC.
185
18870
102
... More
Supplying and fixing Outdoor Electronic Sounder with 4 distinct tone including 40W Speaker with required accessories as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
2
17292
8646
... More
Supplying/Laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd.Including all materials,labour,taxes etc as required as per direction of EIC.
1200
207600
173
... More
Supply, Erection, Testing, commissioning of Fire Hydrant & Sprinkler System
-
-
-
... More
PUMPS & ACCESSORIES
-
-
-
... More
a) Supply, installing, testing, & commissioning of ELECTRIC DRIVEN HYDRANT PUMPS/SPRINKLER PUMP suitable for automatic operation consisting of the following. (as per specification).
2
663944
331972
... More
b) Horizontal split casing centrifugal suction type pump complete for delivery of 2280 ltrs./minute against a total head of 56 mtr approximately to ensure a minimum pressure of 3.5 kg/sq cm at the farthest of topmost hydrant. The installation shall be complete with necessary pressure gauge with shut off cock on delivery side. (the pump should be tested for bench mark at factory and shall be gotten approved by the local fire Authority). complete with bronze impeller (hard finished and dynamically balanced), shaft and Mechanical seal.
-
-
-
... More
c) Squirrel cage induction motor suitable for 415 V, + 6%, 3 phase, 50 Hz, AC supply of 37.5 KW ( 50 HP) Approx. ( or as per pump efficiency ) rating for the above pump with synchronous speed of 2900 RPM type such as as per IP: 55, insulation and flexible coupling and coupling guard with the pump.
-
-
-
... More
d) Common bed plate of fabricated mild steel channel or cast iron type with cushy foot mounting
-
-
-
... More
a) Supply, installing, testing, & commissioning of Diesel Engine DRIVEN HYDRANT PUMPS suitable for automatic operation consisting of the following. (as per specification).
1
609415
609415
... More
b) Diesel Engine Driven Fire Pump of Capacity 137 m3/hr, 56 mtr head, with SUITABLE BHP, (APPROX -70 BHP) 1500 rpm Radiator Cooled Diesel Engine, Cast Iron Body, bronze impeller, Stainless steel shaft, base frame, coupling, coupling guard (for delivery of 2280 ltrs./minute against a total head of 88 mtr approximately to ensure a minimum pressure of 3.5 kg/sq cm at topmost hydrant) etc complete set without battery, as per technical data sheet enclosed. Make : KIRLOSKAR/ Similar Superior make.
-
-
-
... More
a) Supply, installation, testing & commissioning of ELECTRIC AUTOMATIC PRESSURISATION JOCKEY PUMPS set consisting of the following.
1
127148
127148
... More
b) Horizontally mounted single stage centrifugal end suction type Jockey Pump complete for delivery of 180 ltrs. / min against a total head of 56 meters approx complete with bronze impeller, shaft .
-
-
-
... More
c) Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of 10 HP, suitable rating for the above pump with synchronous speed of 2900 RPM TEEC type such as as per IP : 55 and flexible coupling and coupling guard with the pump. Motor shall accept +/- 6% variation and +/- 3% variation in frequency.
-
-
-
... More
Common bed plate of fabricated mild steel channel or cast iron type with cushy foot mounting.
-
-
-
... More
All required civil work shall be included. No extra payment shall be made.
-
-
-
... More
ELECTRICAL
-
-
-
... More
Fabricating, Supplying, erection, testing and commissioning of totally enclosed cubicle type free standing, floor mounted, compartmentalized, sectionalized, dust, damp and vermin proof, with suitable natural ventilation arrangement, front and rear accessible, lockable power cum CONTROL PANEL, fabricated from 2mm thick MS sheet (to give IP 54 protection) spray painted with approved colour shade, have 4 strip sleeved aluminium / aluminium alloy bus bar, bus bar supports, interconnecting from bus bars to outing swatches / MCCBs including earthing the board suitable to accomodate the following including numbering etc. as required :
1
449335
449335
... More
All pumps to be provided with over load relay. all starter to be provided with single phase preventer. necessary cable alloys space for spare switches, internal wiring and copper earthling of all equipment shall also be included. all switch gears / control gears shall be motor duly rating. provision shall be made for providing potential free contacts to all pumps starters for connections to building automation system. (Drawing Shall be approved by Engineer-in charge)
-
-
-
... More
Cubical panel as described above with following:
-
-
-
... More
Incoming section : 500 Amps, 3 pole MCCB with neutral link 50 KA, 415 V + 1 No, Digital voltmeter with phase selection push button = 1 No, 3 phase LED indication lamps, instrument fuses and switches, 500 Amp Al. Bus bar
-
-
-
... More
Outgoing Section:
-
-
-
... More
Hydrant Pumps.
-
-
-
... More
200 A TP MCCB with neutral link 50 KA 415 V, Suitable for motor duty = 4 no, (One Hydrant pump + 1 no Sprinkler pump + 1- Water Curtain Pump1 standby)
-
-
-
... More
100 A TP MCCB with neutral link 50 KA 415 V, Suitable for motor duty = 2 no, (One Standby) (1 nos for Jockey + 1 nos )
-
-
-
... More
On / Off indicating Lamp = 5 sets.
-
-
-
... More
Suitable fully automatic star delta starter for motor complete with single phase preventer relay = 5 nos. for (3 nos for 60 HP and 2 nos for 15 HP)
-
-
-
... More
CT Ratio 300:5 = 3 nos, Ratio- 50:5 = 3 nos, Ratio- 50:5 = 3 nos,
-
-
-
... More
Other accessories like , Earth bus 25 x 5 AL.
-
-
-
... More
Outher accessories for Automatic operation of pumps.
-
-
-
... More
Including compartment and acesssories for Diesel Engine driven Pump Control and automation.
-
-
-
... More
Providing & Fixing PVC insulated PVC ARMOURED ALUMINIUM CONDUCTOR CABLES 1100 V grad including necessary suport clamps and connection plugs complete in all respect.
-
-
-
... More
Power Cable Aluminium 3 core x 70 mm2
40
23040
576
... More
Power Cable Alluminium 3 core x 16 mm2
30
6810
227
... More
Power Cable Alluminum 4 core x 10 mm3
160
38720
242
... More
Control Cable Cu armoured, 2 core x 2.5 mm2
800
206400
258
... More
Providing & fixing GI earthing strip 25mm x 5 mm from all motors and MCC panel to be connected in all aproved manner to general earthing system
60
7740
129
... More
Providing level controllers, PRESURE SWITCHES, wiring, cabling from level controller / pressure switch to panel etc. complete as required to operated the system automatic/manual. Pump shall be protected against running dry. (Indfoss/Danfoss) IPS-100
6
9276
1546
... More
Providing & fixing Dial Type PRESURE GAUGE (Range 0-10 kg/cm² 4" Dial ) complete with pipe stem & cock as reqd.(H-Guru/Fribieg)
6
8334
1389
... More
PIPING AND ACCESSORIES
( HYDRANT, WET RISER & SPRINKLER SYSTEM)
-
-
-
... More
Supplying, laying, jointing and testing of following sizes Heavy gauge, C-Class MS pipe, flanges and fittings such as Bends, Tees, reducers, rubber insertions and galvanised nut & bolts, as per IS: 3589 with up to date amendment i/c fixing the pipe on Ground/wall / ceiling with suitable M.S. strip/ clamps / bracket & painting with one coat of anticorrosive paint / primer and two coats of synthetic enamel paint etc. complete as required. pipe shall have welded connections complete with bevel cut by angle grinder and use of three phase rectifier welding set. Rate shall also include cost of hanger & clamps as required & including all civil breakage and making good the same pipes brought to site shall have bevel edge at ends shall be varnish coated externally.
Make:JINDAL/ BANSAL/ IMPERIAL/
-
-
-
... More
200 MM
20
109260
5463
... More
150 MM
180
643320
3574
... More
100 MM
95
242725
2555
... More
80 MM
100
188500
1885
... More
65 MM
45
72630
1614
... More
50 MM
20
25620
1281
... More
40 MM
150
155100
1034
... More
32 MM
200
170200
851
... More
25 MM
150
111600
744
... More
Supplying and fixing of Internal/ External SINGLE HEADED HYDRANT VALVE inlet complete with 63mm dia female instantaneous outlet of S.S. as per type "A" of IS: 5290 - 1977 with plastic blanked cap, steel chain as reqd.
10
61390
6139
... More
Providing & fixing collecting head with 63 mm dia instantaneous type inlet 150 dia flanged, outlet with built in check valve/non return valve for FIRE BRIGADE CONNECTION fire riser.
-
-
-
... More
Four way
1
13974
13974
... More
Make : SAFEGUARD/FIRESHIELD
-
-
-
... More
Providing 63 mm dia 15M LONG reinforced rubber lined HOSE PIPE as per IS: 636-1962 part - A, with S.S. male & female coupling wire would with copper wire to the hose pipe.
12
53376
4448
... More
SITC of Standard Short size SS branch pipe with S nozzle 16mm dia outlet with standard male instantaneous spring lock type 63mm dia coupling Branch pipe and nozzle shall confirm to IS 903 - 1985.
6
9972
1662
... More
providing and fixing first aid HOSE REEL full swinging type with 30 M length X 20 mm dia double braided rubber pipe IS: 12585 with ABS plastic shut off nozzle of 6 mm dia.Hose shall be connected to the Riser through GI (H) 25 mm dia pipe connection from riser to hose reel including all sockets, nipples, elbows and 25 mm ball valve. fixed on wall with dash fasteners. as reqd
6
52590
8765
... More
Providing and fixing of weather proof standard HOSE CABINATE ( 0.75 M x 0.6 M x 0.3 M ) having central opening glazed door with 6 mm thick clear glass including necessary locking arrangement with Allan key, power coating with PO red paint and for housing 2 nos. RRL hose pipe, 1 NO branch pipe. as reqd.
6
32376
5396
... More
Providing & making drainage provision for the riser with 25 mm dia BALL VALVE completed as required
4
7516
1879
... More
Providing & fixing dual plate spring operated wafer type NON RETURN VALVE complete with bolts, nuts, washers and neoprene rubber gaskets as required
Make: ISI Approved
-
-
-
... More
200 MM
2
58564
29282
... More
150 MM
6
106716
17786
... More
100 mm
3
33150
11050
... More
80 MM
2
15382
7691
... More
Make: L&T / INTERAVALVE/H SARKAR
-
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves, PN-1.6 as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.
-
-
-
... More
200 MM
2
30414
15207
... More
150 MM
5
60225
12045
... More
100 MM
3
14946
4982
... More
80 MM
3
12906
4302
... More
Make: L&T / INTERAVALVE/H SARKAR
-
-
-
... More
Providing & fixing SUCTION STRAINER / FOOT VALVE complete including matching flanges, nuts & bolts etc as reqd.
-
-
-
... More
200 MM
3
56700
18900
... More
Make: L&T / INTERAVALVE/H SARKAR
-
-
-
... More
Supplying and fixing AIR RELEASE VALVE for the above system as reqd,
6
14652
2442
... More
Supplying, Installing, testing and commissioning of Cast Iron body, Leaded Tin Bronze wedge/ ring, flanged Sluice valve of Non rising spindle type as per IS:14846/780, PN 1.6 Rating, for suction and delivery side of the pumps with flanges, bolts, nuts, washers, gaskets etc as reqd.
-
-
-
... More
150 MM
2
45524
22762
... More
80 mm
3
32088
10696
... More
Make: L&T / INTERAVALVE/H SARKAR
-
-
-
... More
Supplying, installing, testing and commissioning of Cast Iron Body flanged Y-type Strainer with SS screen complete with suitable flanges, nuts, bolts, gaskets etc. complete.
-
-
-
... More
200 MM
2
44530
22265
... More
150 MM
3
33342
11114
... More
100mm dia.
1
6664
6664
... More
80mm dia.
1
4710
4710
... More
Make: L&T / INTERAVALVE/H SARKAR
-
-
-
... More
Providing & fixing quartzoid bulb SPRINKLER 68c along with necessary attachment as reqd.
-
-
-
... More
a) Pendant /Upright Sprinkler
450
234900
522
... More
b) Horizontal Side wall sprinkler
60
37020
617
... More
S/F Flow Switch including Commissioning etc as reqd.
-
-
-
... More
150 MM
2
18042
9021
... More
100mm dia.
3
22542
7514
... More
S/F 25 mm dia ISI marked Flexible Drop of 1mtr length made of Stainless steel to withstand required pressure suitable for fire application as reqd.
-
-
-
... More
500 mm
20
27580
1379
... More
1000 mm
10
15780
1578
... More
Supplying, installing, testing and commissioning of DDC mimic panel with logics to interface between the flow switches and motorized butterfly valve for a given zone. All necessary accessories shall be considered and panel shall be indore type.
1
27690
27690
... More
Default status of water curtain panel.
-
-
-
... More
Mains supply MCB in ON condition. Voltage indication in voltmeter
-
-
-
... More
Power ON lamp indication
-
-
-
... More
Reset lamp OFF indication.
-
-
-
... More
Close lamp indication of all actuators.
-
-
-
... More
Mode of operation selected in auto mode.
-
-
-
... More
Supplying, Installing, testing and commissioning motorized butterfly valves with Electric actuator, with solenoid valve with operation with 24V DC supply, with required flanges, nuts, bolts etc. complete. The valve shall be fitted with supervisory switch for monitoring.
-
-
-
... More
100 mm dia
1
7369
7369
... More
S/F Fire door, 1.2 mtr width center/side opening made out of CRCA sheet of 2 mm thick minimum with 2 hour fire rating including panic bar etc as reqd. (7ft x 4 ft)
12
154800
12900
... More
Fire Extinguishers/Signages
-
-
-
... More
S/F 4.5 kg Co2 fire extinguisher with accessories etc. as reqd
2
16900
8450
... More
S/F 4.0 kg Clean agent type fire extinguisher with accessories etc. as reqd
2
25800
12900
... More
S/F 6.0 kg ABC type fire extinguisher with accessories etc. as reqd
12
57420
4785
... More
S/M LED signage with flourscent colour for EXIT /FIRE SAFETY sign board of approved design, including making connection, testing etc as reqd
12
33000
2750
... More
PUBLIC ADDRESS AND VOICE ALARM SYSTEM
-
-
-
... More
Supply, Installation, Testing and Commissioning of IP based PA Controller capable of handling 6 zones, Digital audio controller complying to IEC EN 60849/ DVA016 with built-in high and low pass filters and parametric equalizer. With in built 500 W digital amplifier and 6 Outputs Led Indication of each zone independent output control button and volume control. Network input, BGM input, local emergency Mic input, can work with One Extra stand by amplifier, when the inbuilt amplifier come out faulty the standby amplifier takes over automatically. Support 24 V DC input interface.
1
126411
126411
... More
(Intevio of Honeywell/ Heinrich /SS make)
-
-
-
... More
Supply, Installation, Testing and Commissioning Power Amplifier 25V, 100 V & 4-16 ohm, 2 channel power amplifier
-
-
-
... More
Inrush restraint and softstart
-
-
-
... More
Integrated electronic protection against thermal overload and short circuit.
-
-
-
... More
Temperature controlled fans, airflow from front to rear.
-
-
-
... More
Method of control: Class AB
-
-
-
... More
Power output of amplifier: 1 x 75W sin. /25V RMS
-
-
-
... More
Output range: 50 Hz – 22kHz; 0/-0,5 dB
-
-
-
... More
Signal to noise ratio (not valuated): 105 dB
-
-
-
... More
Channel separation: 75 dB
-
-
-
... More
THD (total harmonic distortion): 0.08%
-
-
-
... More
Input level at max. output voltage: 0 dBu
-
-
-
... More
The amplifier has to be switched into Stand-by Mode in case of power loss by the control centre.
-
-
-
... More
Power Amplifier as mentioned above
1
145793
145793
... More
Supply, Installation, Testing & Commissionig of Volume Controller for all the closed areas.
5
5825
1165
... More
SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 6", Complete Aluminium grille and Metal baffle, line matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, 180 deg dispertion, snap on spring mounting, Peak SPL 97dB complete with necessary mounting hardware & accesories.
14
25746
1839
... More
SITC of 10W Wall Mount Speaker with Frequency Response 150Hz - 15kHz, with Line Matching transformer 100V. Variable tapping 10W/5W, SPL@1M/1W - 90dB, Peak SPL 98dB. Material ABS.
2
5700
2850
... More
SITC of 15W Re-entrant paging Horn speakers with following features:- IP66, Inustrial application, ABS Enclosure, Built-in 100 / 70 V LMT, Variable wattage tappings of 15/7.5/3.75 Watt, SPL 1W/1m = 103dB, SPL@Full power = 115dB
2
7940
3970
... More
Supply, Installation, Testing & Commissionig of Music source CD/ MP3 Player 1 U table top and rack mount clearly visible LCD display, micro computer and touch button operation complete as required.
1
12430
12430
... More
Supply and drawing of Speaker cable of follwing size 2 x 1.5 sq.mm ATC (Oxygen free Copper) Copper conductor cable/ wire in existing MS/PVC Conduit, Complete with termination and testing as per requirement.
-
-
-
... More
Single Pair 2 x 1.5 sq.mm
180
9720
54
... More
Two Pair 2 x 1.5 sq.mm
90
8010
89
... More
Three Pair 2 x 1.5 sq.mm
40
4920
123
... More
Supply and fixing of following sizes of pvc conduit along with the accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required
-
-
-
... More
20 mm dia
200
10600
53
... More
Supply, installation, testing and commissioning of 17" Equipment Rack with power coated finish with front lockable Door with MS Framed translucent Acrylic material, 2 Nos of fans for heat exhaust, Top & Bottom entry knock outs, back side lockable Door, inbuilt MCB, Power Points, raceways and partitions, one no. sliding Tray etc. complete as required
1
33471
33471
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements