Odisha University Of Agriculture And Technology Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha University Of Agriculture And Technology - OUAT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Aug 2024
Closing Date16 Aug 2024
Tender Amount₹ 66,13,542
Costs
EMD
₹ 66,135Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_OUAT_104131_2Tender No
02/2024-25Tender Authority
Odisha University Of Agriculture And Technology ViewPurchaser Address
-Website
http://http://www.ouat.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Shifting of exacavator earth by mechanical means with in 5km initial lead etc. compl. as per the direction of the Engineer-in-charge
30.99
8638
278.76
Supplying filling in foundation with clean coarse river sand including watering & ramming cost & conveyance of all materials, labours & T&P all respect. (Measurement will be taken for finished compacted section only) cost and conveyance of all materials labours all taxes T&P etc all complete as per the direction Engineer in charge.
54.53
28250
518.07
PCC (1:3:6) in foundation/floor bed concrete using 40 mm & below size b.h.c.b granite stone metal of approved quality from approved quarry including lowering laying concrete watering ramming &curing etc compacting to required level laid in layers not exceeding 4’’ thick including cost conveyance all taxes royalty &cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in Charge.
13.12
79139
6031.95
PCC (1:2:4) cement concrete using 12 mm to 20 mm size b.h.c.b. granite stone chips of approved quality from approved quarry including lowering laying concrete watering and curing etc compacting to required le vel including cost, conveyance all taxes royalty and cost of all materials and labours T & P required for the works etc complete in all respects as per the direction of Engineer in charge.
-
-
-
Ground Floor
28.38
218932
7714.33
First Floor
7.37
59992
8140.14
Fly Ash brick masonry work in cm (1:4) using Fly ash brick size (25 x 12 x 8)cm having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in Super structure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.
3.83
22623
5906.92
Fly Ash brick masonry work in cm (1:6) using Fly ash brick size (25 x 12 x 8)cm having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in Foundation and plinth including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.
6.1
34252
5615.22
Fly Ash brick masonry work in cm (1:6) using Fly ash brick size (25 x 12 x 8)cm having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in Super Structure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.
-
-
-
Ground Floor
37.03
209258
5651.05
First Floor
18.01
108425
6020.32
Dismanteling & removing cement concrete including stacking the useful materials for reuse and removing the debris with in 50. m Lead.
9.52
7961
836.28
R.C.C. work of M-20 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
Foundation
13.56
90563
6678.76
Column (Super-structure)
7.74
122274
15797.74
Roof Beam
7.53
118956
15797.74
Chajja
8.88
10917
1229.48
Chajja (1st floor)
8.64
12120
1402.83
Grade Beam
4.77
35985
7544.23
Lintel (Ground Floor)
1.52
21708
14281.65
Lintel (1st Floor)
0.88
14076
15995.52
Roof slab (Ground Floor)
5.94
82230
13843.55
Stair case (Ground Floor)
34.72
544223
15674.63
Cutting ,straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for1 providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges ( payment will be made on weight of MS rod or tersteel only basing on the co- efficient of MS rod or tor steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, ,chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.)
-
-
-
GROUND FLOOR
87.35
753778
8629.41
FIRST FLOOR
2.09
18103
8662.04
12 mm thick cement plaster in C.M.(1:4) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
27.68
5825
210.47
12 mm thick cement plaster in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
-
-
-
Ground Floor
190.25
35576
187
First Floor
101.43
19429
191.56
16 mm thick cement plaster in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
-
-
-
Ground Floor
265.87
71649
269.49
First Floor
130.01
35924
276.32
6 mm thick Cement Plaster(1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment etc.all complete as per the direction of the Engineer-in-charge
-
-
-
Ground Floor
152.16
30479
200.31
First Floor
71.89
14762
205.35
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the direction of Engineer in charges
905.54
75775
83.68
Applying one coat of primer of approved shade & make to wall surface including polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/ Nerolac) as per the direction of Engineer in charge.
-
-
-
Ground Floor
602.21
48550
80.62
First Floor (External wall)
23.81
1997
83.9
First Floor (Internal wall)
279.52
23085
82.59
Painting two coats with Plastic Emolsion paint of approved make & shade to wall surface including sand papering , polishing the surface with cost ,conveyance, taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge
-
-
-
Ground Floor
384.28
41225
107.28
First Floor
201.9
22091
109.42
Applying two coats of weather coat seal paint including curing scaffolding cost, conveyance royalty & taxes of all materials & cost of all labour ,T&P etc required for the work complete in all respect as per the direction of Engineer in charge (BERGER/ SALIMAR/ASIAN/JOHNSON/Nerolac paints to be used.)
-
-
-
Ground Floor
217.93
21592
99.08
First Floor
101.43
10409
102.63
Supplying, fitting & fixing of M.S. window Grill made out of M.S. Flat as per approved design including all fabrication (IS 800 and 816) errection in all floors and fixing to wall with PCC (1:2:4) and repair to wall damages including cost & conveyance of all materials all labour all taxes T& P etc complete in all respect as per the direction of Engineer in charge.
1557.9
104114
66.83
Applying one coat of primer of approved shade & make to Iron work including polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/ Nerolac) as per the direction of Engineer in charge.
34.83
2595
74.52
Painting two coats with Synthetic enamel paint of approved shade & make to door and windows, grills etc including sand papering , polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge.
86.58
16043
185.3
First Floor
5.4
1025
189.97
Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
15.66
77688
4960.97
Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
7.35
63813
8682.12
Fixing tiles /For Granite Slab (0.4 to 1.00 Sqm ) 10mm to 20mm thick in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete
104.85
307022
2928.21
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete.
54.8
168662
3077.78
Supplying, fitting and fixing vitrified industrial tile 30x30cm colour printed 8 to 10 mm thick in floors of approved make confirming to IS : 4457 lead on 20mm thick cm (1:4) and filling joints with white cement of approve quality including cost of all materials T& P etc complete in all respect as per the direction of Engineer in charge.
33.87
35774
1056.24
Supplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floors of approved make confirming to IS : 13755 20mm thick cm (1:4) and filling joints with white cement of approve quality including cost of all materials T& P etc complete in all respect as per the direction of Engineer in charge.
-
-
-
FIRST FLOOR
68.13
82149
1205.78
M.S.Panneled Door single leaved shutter with M.S.frame overall size including frame:- 1830mm (H) x 910mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 30x30x5mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width of leaf :- 19x5mm M.S.Flat 3nos. Hinges size :- 100mm 3nos bought out as per ISS. Hold fast :- 30 x 30x 5mm M.S.Angle 150mm length bifurcated at the tip 3nos on each side. Handle :- 19x5mm M.S.Flat fabricated 2nos. Aldrop :- 2nos bought out as per ISS. Tower bolt :- 2nos bought out as per ISS. Approximate weight :- 36.50Kgs
378
30187
79.86
M.S.Panneled Door single leaved shutter with M.S.frame overall size including frame:- 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 35x35x6mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 10mm C.R.Sheet. Panel stiffener covering width of leaf :- 19x5mm M.S.Flat 3nos. Hinges size :- 100mm 3nos bought out as per ISS. Hold fast :- 35 x 35x 6mm M.S.Angle 175mm length bifurcated at the tip 3nos on each side. Handle :- 19x5mm M.S.Flat fabricated 2nos. Aldrop :- 2nos bought out as per ISS. Tower bolt :- 2nos bought out as per ISS. Approximate weight :- 54Kgs
1080
78678
72.85
Fixing tiles & Glazed /Ceramic in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tile sas per the direction of engineer in charge.
-
-
-
FIRST FLOOR
27
22545
835
Dismantling & removing 2.5 cm thick grading concrete and tarfelting from roof slab cleaning the surface lowering & removing debris with in 50. m Lead.etc complete in all respects as per the direction of engineer in charge.
161
29859
185.46
Providing and applying of two coat of Sika Top Seal-107 water proofing coating compound @ 3Kg/Sqm over terrace/Balconies/Basement on a cleaned dry and properly pre-watted saturated surface including cost, conveyance of all materials, sundries, T & P all labour etc complete as per direction of Engineer-in-Charge.
161
55545
345
25 mm thick Grading Concrete in CC (1:2:4) using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing with smoth finishing and mixing WPC @ 2% weight of cement cost, conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of engineer in charge.
47.5
18591
391.4
50 mm thick Grading Concrete in CC (1:2:4) using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing with smoth finishing and mixing WPC @ 2% weight of cement cost, conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of engineer in charge.
161
164570
1022.18
Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of engineer in charge.
103.5
97601
943.01
Providing fitting and fixing of false ceilling with Aluminium anodised T Section No.3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete (12.5m thick Gypsum Board of size 6'-0'' x 4'-0'')
63.25
84677
1338.77
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect as per the direction of Engineer inCharge.
242.5
149012
614.48
Providing, fitting & fixing wall panelling made out of Aluminum Extruded section horizental & vertical members placed at spacing 2'-0" x 2'-0" C/C with 4mm thick A.C.P. including cost, conveyance, taxes of all material, instalation charges etc complete.. as per the direction of Engineer inCharge.
51.75
280353
5417.45
Supplying fitting & fixing wall panelling made out of Aluminum section framing confirming to standard aluminum section as horizontal and vertical member with atleast 600 mm c/c and fixing of 9 mm thick BWR ply with 4mm thick thick veener pesting with malamine polishing,all fixture etc including cost, conveyance, taxes of all material, instalation charges etc complete..
52.63
120285
2285.5
Providing & Fixing Stainless Steel Letter size Including the cost of all material and labour, etc all complete as per the direction of Engineer inCharge.
620
117800
190
Angular steel truss revetted welded type including bottom runner ties made out of M.S. angles but excluding purlins, including the cost of all material and labour etc all complete as per the direction of Engineer inCharge.
1.07
87918
82166.73
STORE ROOM-1
Sub-Head I (modular Wiring Items)
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T /Indoasian/ Anchor / Havels /HPL/ V Guard )
10
9030
903
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/legrand/Anchor / Indoasian/ or S.S)
3
588
196
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/legrand/Anchor / Indoasian/ or S.S)
3
1641
547
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/legrand/Anchor / Indoasian/ or S.S)
1
683
683
Surface/ Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
51.03
8011
157
Surface/ Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
67
11457
171
Surface/ Recessed wiring to submain in 4 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
80
23040
288
Surface/ Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
21
3948
188
Surface/ Recessed wiring to submain in 4 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
21
5691
271
Surface/ Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
30
6570
219
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Make-Havells/legrand/C&S /L&T/ Indoasian/ or S.S)
1
672
672
Supply & Fixing of 4 moudle(125mmx75mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/Anchor / Indoasian/c or S.S)
1
295
295
Supply & Fixing of1 moudle(75mmx75mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/Anchor / Indoasian/c or S.S)
1
248
248
Supply & Fixing of 12 moudle(200mmx150mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Anchor / Indoasian/Havells or S.S)
1
510
510
Supplying and fixing of 20 mm sizes of medium class PVC FR conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor /S.S)
10
1230
123
Supplying and fixing of 25 mm sizes of medium class PVC FR conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge (.MAKE KINJAL/ AKG/Anchor /S.S)
10
1250
125
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Legrand/Havells/Anchor / Indoasian/c or S.S) as required as per direction of Engg.-in-Charge.
1
108
108
Supplying and installation of 25 Amps AC starter Modular type, on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .Make-Make-Havells/legrand/C&S /L&T/ Indoasian/ or S.S)
1
621
621
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover..as required as per direction of Engg.-in-Charge. Make-Make-Anchor/Cona/ or S.S)
1
213
213
S/F of BK Angle/ batten holders W/O bulb with metal box but in the shed including all connections etc as required. Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge..(Make-Anchor/legrand Havells/ Indoasian/ S.S) (Modular)
2
150
75
Supplying,fixing of Blanking plate(modular type) in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-/legrand / Anchor / Havells/ Indoasian/ S.S) complete suitable for Office.
2
90
45
Sub-Head II (Light fitting Fixture & Fan)
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Havells/almonard/Crompton/Usha / S.S) ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
1
3322
3322
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers (Make-Havells/almonard/Crompton/Usha / S.S) ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
1
3873
3873
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour High speed ceiling fan (Havells/Crompton/ Polar / Bajaj/ S.S ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement
3
13359
4453
S/F of 24 W LED 1X1 surface/ recessed fiting complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ C&S/wipro)
6
23130
3855
S/F of 18/20 watt LED batten fitting with tube & inbuilt driver complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/HPL/crompton/ bajaj/ C&S)
4
3324
831
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
1
1961
1961
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ Indoasian/ C&S/ S.S) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
2
688
344
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ Indoasian/ C&S/ S.S) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge
40
5720
143
(Earthing) INSTALLATION
supply & installation of (i)Code No. MES- 80(3mtrs)( G.I) Maintenance free Safe Earthing ElectrodesCPRI Certified with ISI G.I.pipedia 75 mm as secondary electrode of wall thickness 3.6 mm and the primary Earthing Electrode will be 50mm x 6mm x 1nos G.I strip filled with a highly conductive & non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 7,06,500 for 3mtrs.length and Cross Sectional Primary conducting area is 300 sq.mm And solid G.I base plate seals the unit at the bottom, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
1
19629
19629
supply & filling of Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag. complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
1
1742
1742
supply & Laying of 30×5 G.I Strip, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
23
5244
228
Providing and fixing 8 SWG copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
34
3706
109
CABLING AND END TERMINATION MAIN AREA
supply of 4core x 16 sq mm (store)Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
12
2748
229
supply of 4 core x 4 sq mm (for small power) Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
24
2108
87.87
supply of 3.5core x 35 sq mm (garage/gallerry) Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
58
23142
399
LAYING OF CABLE
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
5
770
154
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
40
7000
175
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
5
280
56
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
20
1540
77
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
4
180
45
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
10
610
61
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
5
515
103
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
5
790
158
Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
2
458
229
Supplying and making end termination with 3.5 core x35 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
2
798
399
Providing,fixing and laying of 50 mm dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. (jindal / TATA/ S.S)
1
433
433
Providing,fixing and laying of 80 mm dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. (jindal / TATA/ S.S)
1
495
495
Providing,fixing and laying of 200 mm dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
2
1700
850
PANELS (STORE PANEL)
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint, complete in all respects as required with As Incoming 100 Amps fore pole MCCB , for out going connection etc. 4strip 125 amps copper BUSBAR mounted on special type insulator 2set, Indicator 3 nos & toggle switch three nos,digital meter for voltage, amper & frequency, & for Out Going ,40A 2P MCB 02 NOS FOR EM. POWER BDB ,05 nos 32A 4P MCB POWER BDB FOR LIGHT BDB/POWER BDB , 03 nos 40A 4P MCB POWER BDB FOR LIGHT BDB/POWER BDB, etc, complite with all accessories & Connection. Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge. (Make:-HPL/Havells /Indoasian/C&S)
1
66631
66631
CABLE TRAY PERPORATED TYPE FOR DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
5
2974
594.86
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
5
3450
690
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand / S.S)ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
5
4565
913
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 34mm(H) x 225mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
2
3562
1781
STORE ROOM -2
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular box having front bakelite cover of suitable size , modular box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard or equievalant )
-
-
-
Group- B
2
1806
903
Surface/ Recessed wiring to submain in 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard or equievalant)
40
6840
171
Sub-Head II (Light fitting Fixture & Fan)
Supplying and fixing of small focus DOWN Surface light for small monuments as 12/15W , as per direction of Engg.-in-Charge Make : (Panasonic /PHILIPS/L&T/WIPRO / Havells/ Crompton/ S.S or euievalant).
2
2460
1230
COMMON ROOM, MAIN GATE
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular box having front bakelite cover of suitable size , modular box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard or equievalant )
-
-
-
Group- B
40
36120
903
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/legrand/Anchor / or S.S or equievalant)
3
588
196
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/legrand/Anchor/ or S.S or equievalant)
4
2732
683
Surface/ Recessed wiring to submain in 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard or equievalant)
137.98
23594
171
Surface/ Recessed wiring to submain in 2 x 4 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard or equievalant)
60
11280
188
Surface/ Recessed wiring to submain in 4 x 10 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard or equievalant)
40
17760
444
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Make-Havells/legrand/C&S /L&T/ or S.S or equievalant)
8
5376
672
Sub-Head II (Light fitting Fixture & Fan)
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour High speed ceiling fan (Havells/Crompton/ Polar / Bajaj/ S.S or euievalant ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement
9
40077
4453
S/F of 36 W LED 2X2 recessed fiting complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ C&S/wipro or euievalant)
12
48191
4015.92
S/F of 24 W LED 1X1 surface/ recessed fiting complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ C&S/wipro or euievalant)
19
73245
3855
1 X 40W gate light complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ Philips/wipro or euievalant)
4
46424
11606
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of 6 Way (8+18) double door TPDB with 63 Amps 4 pole MCB 1no ,SP MCB 18 nos , including all accessories & connections cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge (Havell/SS/ C&S or euievalant)
1
14255
14255
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ C&S/ S.S or euievalant) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
5
1720
344
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ C&S/ S.S or euievalant) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge
8
1144
143
PH PORTION
Supplying all materials, labour, T&P and providing and fixing to wall and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
-
-
-
20mm dia C-PVC pipe
12
3630
302.5
25mm dia C-PVC pipe
17
6868
404
Supplying all materials, labour, T&P and providing and fixing to wall and floor pvc pipes conforming to ASTM-D-1785/2004 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall and floor all complete as per specification and direction of the Engineer in charge.
-
-
-
32mm dia PVC ASTM Pipe
15
4827
321.8
25mm dia PVC ASTM pipe
4
978
244.5
50mm dia PVC ASTM Pipe
20
10520
526
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
30
2037
67.9
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
5
1206
241.3
Supplying all materials, labour, T&P and cutting grooves Brick in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
29
6348
218.9
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.(C.P.fittings are (Plaza/zigma/zen make)
-
-
-
15mm dia CP angle stop cock
11
10561
960.1
20mm dia CP concealed stop cock
1
1130
1130.7
15mm dia CP two in one bib cock
2
2613
1306.6
Health Fussed (1mm P.V.C tube with wall Hook)
2
1757
878.8
15mm dia CP extension piece
5
650
130.1
C.P Flange Big Size
6
609
101.6
15mm dia CP Pillar cock
7
6307
901
CP Urinal spereader
3
2664
888
25mm UPVC Ball valve (SCH-80)
4
2165
541.26
32mm UPVC Ball Valve (SCH-80)
2
1924
962.32
50mm UPVC Ball valve (SCH-80)
1
1672
1672.45
15 mm dia CP Long body Bib cock
4
3952
988
32mm PVC waste Coupling
8
847
105.97
32mm PVC waste pipe
8
999
124.99
32mm C.Pwaste
8
3041
380.2
15mm PVC connection pipe
13
1509
116.13
125mm C.P Grating
15
1450
96.7
Providing all materials labour T&P for fitting & fixing in position of half back stall type Magnum (G) urinal with necessary fittings including the cost ,conveyance taxes royalties of all materials and cost off all labours T&P required for the work etc. complete in all respect as per the direction of Engineer in –charge
3
20039
6679.7
Supplying all materials, labour T&P for fitting & fixing of 10 liter. Capacity PVC low level cistern of any approved brand, PVC connection pipes etc all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours all taxes T&P etc all complete(Parryware/Nycer/Cera)
2
3896
1948
Supplying all materials, labour, T&P and fitting and fixing PVC SWR pipes and fittings of the following with suitable clamps as per specification and direction of the Engineer in charge (Type-B)
-
-
-
110mm O.D PVC SWR pipes (Type-B)
60
31194
519.9
75mm O.D PVC SWR pipes (Type-B)
22
8236
374.4
110mm PVC SWR 'P' trap
15
5896
393.1
110mm PVC SWR Tee
6
1897
316.3
110mm PVC SWR Plain Bend
4
830
207.5
110mm PVC SWR single Y with Door
6
2658
443.1
75mm PVC SWR Door Bend.
5
720
144
75mm PVC SWR Plain Bend.
4
458
114.6
90mm dia Nahin trap
4
634
158.7
110x80mm dia Reducer
4
569
142.37
110mm dia Vent cowl.
3
187
62.5
W/C connector
2
638
319.2
PVC Clamp suitable for 110mm dia pipe
15
1035
69
Supplying all materials labour T&P for fitting & fixing earthen ware white glazed squatting (Ladies) urinal foot plate with integral flashing confirming ISI specification including embedding squatting urinal foot plate WITH white cement finishing at top of urinal foot plate etc. Complete etc. complete as per (PH) specification. And as per the direction of Engineer in charge Cost and conveyance of all materials labours all taxes T&P etc all complete. (Parryware/Nycer/Cera)
1
3321
3321.4
Supplying all materials labour T&P for fitting & fixing 580 mm (23”) white glazed vitrious china squatting pan (Indian water closet) confirming to ISI specification supply of jointing materials for cement jointing cement concrete sand etc. & including cutting the floor & making good the damages etc complete as per P.H specification. Cost and conveyance of all materials labours & T&P etc all complete. (Parryware/Nycer/Cera)
1
3622
3622.6
Supplying all materials labour T&P for fitting & fixing of E.W.C Commode (S) Trap with seat cover as the direction of E.I.C. (Parryware/Nycer/Cera)
1
3132
3132.7
Fixing plastic seat and cover for wash down water closet with chromium plated hinges and rubber buffers all complete as per specification.
1
791
791.1
Supplying all materials labour T&P for fitting & Fixing Wash Hand Basin and making good the damages etc all complete as per specification(Nycer / Parry ware/ Cera (white).
7
21119
3017.1
Pedestal
7
18353
2621.9
Supplying all materials labour T&P for fitting & fixing of Mirror of Size (24” x 24”) of Belgium/Golden fish Brand with supply of pluges screws & necessary Fittings etc. complete.
7
6318
902.6
Supplying all materials labour T&P for fitting & fixing of Towel Rail including polishing the towel rail and all necessary materials all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours & T&P etc all complete.
2
2142
1071.4
Supplying all materials labour T&P for fitting & fixing of Towel Ring including polishing the towel rail and all necessary materials all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours & T&P etc all complete.
7
3827
546.8
Supplying fixing & fitting in position of 6”x 6” Soap dish including the cost, conveyance taxes royalties of all materials and cost off all labours T&P required for the work etc. complete in all respect.
4
1192
298.1
Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification.
2
2267
1133.7
Providing fitting and fixing of Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position with construction of Brick masonry staging for installation of 2000 liters capacity 3 Layer white PVC Tank with fly ash brick work with C.M (1:6) up to required. Height & length & plastering with C.M (1:4) and providing RCC slab and RCC beam with RCC (1:1.5”3) using 12mm HG chips including centering & shuttering & providing 1st class fly ash brick work with C.M (1:6) circular dia over the slab to support the tank including conveyance of all materials to work site watering all complete as per specification and direction of the Engineer in charge.
-
-
-
Triple Layer (White) Cylinderical Vertical water storage tanks (2000 ltr ) = 1 nos
1
45472
45472.1
Providing all materials labour T&P for construction of brick mosanary Gully Trap chamber with earth work in excavation base metaling C.C (1:4:8) Fly Ash bricks having crushing strength not less than 75 kg /cm2 with plaster 12 mm Cement Plastering CM (1:3) with supply of (300mm x 300mm) size C.I grating or RCC Cover including fitting & fixing of gully trap with supply of all jointing materials etc complete as per the P.H Specification and direction by Engineer in charge .
4
9829
2457.3
Providing all materials, labour T&P for Construction of Inspection Chamber with CC(1:3:6) on bed with hard granite metal 25mm to 50mm brick work with Fly Ash bricks having crushing strength not less than 75 kg/cm2 in cement mortar (1:6) CC roof slab with CI MH cover molding champing & channel benching with CC (1:2:4) with BHG chips size 20mm to 12mm. (15mm) thick (1:3) including cement painting inside and cement flush pointing (1:3) out side the chamber EW in excavation in all kinds of soil & refilling the cavity around the chamber etc. complete as per (PH) specification. Complete as per the direction Engineer in charge. Cost and conveyance of all materials labours & T&P etc all complete.
3
26442
8814.2
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
15679
15679
450x450mm Square Size Man Hole Cover (30.00 Kg)
1
3092
3092.2
Providing all materials, labour T&P for Construction of Soak Way Pit of internal dia meter 4’- 0” (dia) & 7’-00 (deep) including & 1’-00 height from ground level providing precast 4’-0” RCC ring to sock pit & filled with by brick khoa including earth work in excavation & RCC cover, including all materials labours T&P all taxes royalties etc complete in all respect as per the direction of Engineer in- charge.
1
15225
15225.6
Providing all materials labours T&P for fitting & fixing of 10mm to 20mm Thick Granite partition of Size with including cost, conveyance, royalty all taxes cost of all labour all materials T&P etc all complete as per P.H. specification and direction of Engineer in –charge.
2.16
6324
2928.21
Providing all materials labour T&P for PCC (1:4:8) in foundation bed using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing etc compacting to required level laid in layers not exceeding 6” thick including cost conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in-charge Cost and conveyance of all materials labours.
5.5
30730
5587.3
Providing all materials labour T&P for PCC (1:2:4) in foundation bed using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing etc compacting to required level laid in layers not exceeding 6” thick including cost conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in-charge Cost and conveyance of all materials labours.
2.62
20211
7714.33
12mm thick cement plaster in C.M.(1:4) finished smooth to brick walls after racking out the joints with two coat of SIKA latex mixed through (1:4) iincluding slurry treatment & deep chipping over wall surface including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
18.1
6959
384.5
Fixing tiles & Glazed /Ceramic in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles etc. complete in all respect as per the direction of Engineer in charges
15.1
14377
952.13
Fixing tiles & Glazed /Ceramic in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.complete in all respect as per the direction of Engineer in charges
59.4
48394
814.73
12mm thick cement plaster in co (1:4) with neat in all floors finished to brick walls in skirting after racking out the joints including watering, curing, etc complete with cost conveyance taxes and royalties of all materials & labours T&P required for the work etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
49.5
9970
201.43
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. (per one Sq. Mtr.) (Data for 10 sqm.) INCLUDING COST OF MATERIL &Labour
14.64
1225
83.68
Painting 1 coat with approved primer to wall (per one Sq. Mtr.) (Data per 9.30 Sqm.) (Labour Cost only) INCLUDING COST OF MATERIL &Labour
14.64
1180
80.62
Wall painting TWOcoats with plastic emulsion paint of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COST OF MATERIL &Labour
14.64
1570
107.28
Supplying, fitting & fixing of M.S. window Grill made out of M.S. Flat as per approved design including all fabrication (IS 800 and 816) errection in all floors and fixing to wall with PCC (1:2:4) and repair to wall damages including cost & conveyance of all materials all labour all taxes T& P etc complete in all respect as per the direction of Engineer in charge.
66
4410
66.83
Applying one coat of primer of approved shade & make to Iron work including polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/ Nerolac) as per the direction of Engineer in charge.
2.2
163
74.52
Painting two coats with Synthetic enamel paint of approved shade & make to door and windows, grills etc including sand papering , polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge.
2.2
407
185.3
Providing all fitting and fixing of UPVC Door of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures for the work complete in all respect as per the direction of Engineer in charge.
6
52092
8682.12
Supplying, fitting and fixting of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures,
1.6
7937
4960.97
Construction 1 no 50 users RCC Septic tank
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
28.62
8499
297
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
3.24
1678
518.07
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
1.62
9051
5587.3
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.08
8331
7714.33
Providing all materials labour T&P for Fly Ash brick masonry work in cm (1:4) brick Fly Ass brick (25x12x8cm) having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in F&P including splays cutting & circular mouilding, hoisting,, watering, curing etc with cost of all labour T&P for the work in all respect as per the direction of Engineer in-charge. Cost and conveyance of all materials labours & T&P etc all complete.
12.4
72801
5871.09
Reinforced Cement concrete work of M-20 grade concrete with 20 mm down graded crusher broken hard granite chips including hoisting lowering laying concrete and compacting by using vibrators watering curing for 28 days centering shuttering & finishing the expose surface smooth providing groves beads whether necessary including cost convince taxes & royalty of all materials & cost of all labour T&P hire charges of concrete mixture machine & vibrator machine required for the work etc. Complete in all respect but excluding the cost of MS rod of for steel & binding wires & labour charges for cutting bending binding tying the grills. As per the direction of Engineer in-charge. Coat and conveyance of all materials labours T&P etc all complete.
1.33
18411
13843.55
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.06
9181
8629.41
Supplying all materials,labour,T&P and providing 12 mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
40.04
9739
243.25
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
1
316
316.6
450x450mm Square C.I Size Cover (30.00 Kg)
2
6184
3092.2
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
28.62
4721
165
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements