Odisha University Of Agriculture And Technology Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha University Of Agriculture And Technology - OUAT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Aug 2024
Closing Date16 Aug 2024
Tender Amount₹ 92,00,930
Costs
EMD
₹ 92,009Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_OUAT_104131_1Bid Award Id
ViewTender No
02/2024-25Tender Authority
Odisha University Of Agriculture And Technology ViewPurchaser Address
-Website
http://http://www.ouat.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Shifting of exacavator earth material by mechanical means with in 5km initial lead etc. compl.as directed by the Engineer-in-charge .
186.32
51938
278.76
... More
Supplying filling in foundation with clean coarse river sand including watering & ramming cost & conveyance of all materials, labours & T&P all respect as per the direction Engineer in charge.
276.12
143049
518.07
... More
PCC (1:3:6) in foundation/floor bed concrete using 40 mm & below size b.h.c.b granite stone metal of approved quality from approved quarry including lowering laying concrete watering ramming &curing etc compacting to required level laid in layers not exceeding 4’’ thick including cost conveyance all taxes royalty &cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in Charge.
61.18
369034
6031.95
... More
PCC (1:2:4) cement concrete using 12 mm to 20 mm size b.h.c.b. granite stone chips of approved quality from approved quarry including lowering laying concrete watering and curing etc compacting to required le vel including cost, conveyance all taxes royalty and cost of all materials and labours T & P required for the works etc complete in all respects as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
8.44
65108
7714.33
... More
Fly Ash brick masonry work in cm (1:6) using Fly ash brick size (25 x 12 x 8)cm having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in Foundation and plinth including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.
102.52
575672
5615.22
... More
Fly Ash brick masonry work in cm (1:6) using Fly ash brick size (25 x 12 x 8)cm having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in Super Structure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
64.71
365679
5651.05
... More
First Floor
21.73
130833
6020.32
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
331.25
35867
108.28
... More
R.C.C. work of M-20 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Foundation (Ground Floor)
23.4
156282
6678.76
... More
Grade Beam (Ground Floor)
14.99
113088
7544.23
... More
Column Super Structure (Ground Floor)
16.78
265086
15797.74
... More
Sill Band (Ground Floor)
1.13
8547
7544.23
... More
Lintel (Ground Floor)
4.83
68980
14281.65
... More
Chajja (Ground Floor)
27.96
34371
1229.48
... More
Roof Beam (Ground Floor)
15.96
252131
15797.74
... More
Roof Slab (Ground Floor)
39.66
549035
13843.55
... More
Stair Case (Ground Floor)
2.56
40189
15674.63
... More
Column Super-structure Level (First Floor)
3.07
54691
17814.83
... More
Lintel (First Floor)
0.77
12316
15995.52
... More
Chajja (First Floor)
2.09
2934
1402.83
... More
Roof Beam (First Floor)
0.64
11401
17814.83
... More
Roof Slab (First Floor)
3.53
54608
15469.86
... More
Cutting ,straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for1 providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges ( payment will be made on weight of MS rod or tersteel only basing on the co- efficient of MS rod or tor steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, ,chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.)
-
-
-
... More
Ground Floor
141.35
1219767
8629.41
... More
First Floor
8.64
74840
8662.04
... More
12 mm thick cement plaster in C.M.(1:4) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
141.63
29808
210.47
... More
12 mm thick cement plaster in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
-
-
-
... More
Ground Floor
176.61
33026
187
... More
First Floor
188.55
36691
194.6
... More
16 mm thick cement plaster in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
-
-
-
... More
Ground Floor
442.81
119332
269.49
... More
First Floor
42.09
11630
276.32
... More
6 mm thick cement plaster C.M.(1:4) to RCC surface after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
-
-
-
... More
Ground Floor
344.97
69100
200.31
... More
First Floor
25.25
5185
205.35
... More
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the direction of Engineer in charges
1220.28
102113
83.68
... More
Applying one coat of primer of approved shade & make to wall surface including polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
964.39
77749
80.62
... More
First Floor
255.89
21133
82.59
... More
Painting two coats with Plastic Emulsion paint of approved make & shade to wall surface including sand papering , polishing the surface with cost ,conveyance, taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge
-
-
-
... More
Ground Floor
787.78
84513
107.28
... More
First Floor
67.34
7368
109.42
... More
Applying two coats of weather coat seal paint including curing scaffolding cost, conveyance royalty & taxes of all materials & cost of all labour ,T&P etc required for the work complete in all respect as per the direction of Engineer in charge (BERGER/ SALIMAR/ASIAN/JOHNSON/Nerolac paints to be used.)
-
-
-
... More
Ground Floor
176.61
17498
99.08
... More
First Floor
188.55
19350
102.63
... More
Supplying, fitting & fixing of M.S. Grill as per approved design including all fabrication errection in all floors including cost & conveyance of all materials all labour all taxes T& P etc complete in all respect as per the direction of Engineer in charge.
2035
135999
66.83
... More
Applying one coat of primer of approved shade & make to Iron work including polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/ Nerolac) as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
96.32
7177
74.52
... More
First Floor
2.52
192
76.49
... More
Painting two coats with Synthetic enamel paint of approved shade & make to door and windows, grills etc including sand papering , polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
96.32
17848
185.3
... More
First Floor
2.52
478
189.97
... More
Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. etc complete in all respect as per the direction of Engineer in charge.
42.5
210841
4960.97
... More
Providing and fixing ISI marked 35mm thick flush door shutter decorative type , core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering wirh vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete etc.as per the direction of the Engineer in Charge.
10.75
138303
12865.41
... More
Fixing tiles /For Granite Slab (0.4 to 1.00 Sqm ) 10mm to 20mm thick in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc complete in all respect as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
147.74
432622
2928.21
... More
First Floor
9.75
28834
2957.35
... More
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing etc complete in all respect as per the direction of Engineer in charge.
-
-
-
... More
Ground Floor
12.26
37739
3077.78
... More
First Floor
2.35
7346
3126.29
... More
Supplying, fitting and fixing vitrified industrial floor tile 30x30cm premium grade 8 to 10 mm thick in floors of approved make confirming to IS : 4457 laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work etc complete in all respect as per the direction of Engineer in charge.
150.3
158752
1056.24
... More
M.S.Panneled Door single leaved shutter with M.S.frame overall size including frame:- 1830mm (H) x 910mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 30x30x5mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width of leaf :- 19x5mm M.S.Flat 3nos. Hinges size :- 100mm 3nos bought out as per ISS. Hold fast :- 30 x 30x 5mm M.S.Angle 150mm length bifurcated at the tip 3nos on each side. Handle :- 19x5mm M.S.Flat fabricated 2nos. Aldrop :- 2nos bought out as per ISS. Tower bolt :- 2nos bought out as per ISS. Approximate weight :- 36.50Kgs
98.28
7848
79.86
... More
M.S. Panneled Door double leaved shutter with M.S.frame overall size including frame:- 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 35x35x6mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 10mm C.R.Sheet. Panel stiffener covering width of each leaf :- 19x5mm M.S.Flat 3nos on each leaf. Hinges size :- 100mm 6nos (3nos each side) bought out as per ISS. Hold fast :- 35 x 35x 6mm M.S.Angle 175mm length bifurcated at the tip 3nos on each side. Handle :- 19x5mm M.S.Flat fabricated 4nos. Aldrop :- 2nos bought out as per ISS. Tower bolt :- 2nos bought out as per ISS. Approximate weight :- 54Kgs
600
43710
72.85
... More
25 mm thick Grading Concrete in CC (1:2:4) using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing with smoth finishing and mixing WPC @ 2% weight of cement cost, conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of engineer in charge.
-
-
-
... More
First Floor
344.11
134682
391.4
... More
Providing & fixing false ceiling of Alm anodised T section no 3215 with 2'-0" center to centre,L section no 1705 of to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Alm grid 2'-0"x2'-0" from ceiling etc complete as paer direction of engg incharge. (12.5m thick gypsum board )
11.26
17975
1595.87
... More
Supplying, fittin and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materilas, labour, T&P etc. required for the complete in all respect as per the direction of engineer in charge.
8.2
28441
3468.42
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect as per the direction of engineer in charge.
66.09
40610
614.48
... More
EI PORTION
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T /Indoasian/ Anchor / Havels /HPL/ V Guard )
80
72240
903
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Havells/legrand/Anchor / Indoasian/ or S.S)
11
2156
196
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/legrand/Anchor / Indoasian/ or S.S)
11
6017
547
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Havells/legrand/Anchor / Indoasian/ or S.S)
9
6147
683
... More
Surface/ Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
499.06
78352
157
... More
Surface/ Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
710
121410
171
... More
Surface/ Recessed wiring to submain in 4 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
350
100800
288
... More
Surface/ Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
260
48880
188
... More
Surface/ Recessed wiring to submain in 4 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
298
80758
271
... More
Surface/ Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
120
26280
219
... More
Surface/ Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
150
47550
317
... More
Surface/ Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/lV Guard)
200
88800
444
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Make-Havells/legrand/C&S /L&T/ Indoasian/ or S.S)
2
1344
672
... More
Supply & Fixing of 4 moudle(125mmx75mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/Anchor / Indoasian/c or S.S)
6
1770
295
... More
Supply & Fixing of1 moudle(75mmx75mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/Anchor / Indoasian/c or S.S)
6
1488
248
... More
Supply & Fixing of 12 moudle(200mmx150mm)GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. Make-Legrand/Anchor / Indoasian/Havells or S.S)
6
3060
510
... More
Supplying and fixing of 20 mm sizes of medium class PVC FR conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor /S.S)
40
4920
123
... More
Supplying and fixing of 25 mm sizes of medium class PVC FR conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge (.MAKE KINJAL/ AKG/Anchor /S.S)
40
5000
125
... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Legrand/Havells/Anchor / Indoasian/c or S.S) as required as per direction of Engg.-in-Charge.
6
648
108
... More
Supplying and installation of 25 Amps AC starter Modular type, on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .Make-Make-Havells/legrand/C&S /L&T/ Indoasian/ or S.S)
4
2484
621
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover..as required as per direction of Engg.-in-Charge. Make-Make-Anchor/Cona/ or S.S)
2
426
213
... More
S/F of BK Angle/ batten holders W/O bulb with metal box but in the shed including all connections etc as required. Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge..(Make-Anchor/legrand Havells/ Indoasian/ S.S) (Modular)
6
450
75
... More
Supplying,fixing of Blanking plate(modular type) in existing switch box including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-/legrand / Anchor / Havells/ Indoasian/ S.S) complete suitable for Office.
6
270
45
... More
Sub-Head II (Light fitting Fixture & Fan)
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Havells/almonard/Crompton/Usha / S.S) ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
1
3322
3322
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers (Make-Havells/almonard/Crompton/Usha / S.S) ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
1
3873
3873
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour High speed ceiling fan (Havells/Crompton/ Polar / Bajaj/ S.S ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement
10
44530
4453
... More
S/F of 36 W LED 2X2 recessed fiting complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ C&S/wipro)
12
48191
4015.92
... More
S/F of 24 W LED 1X1 surface/ recessed fiting complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/crompton/ bajaj/ C&S/wipro)
12
46260
3855
... More
S/F of 18/20 watt LED batten fitting with tube & inbuilt driver complete with all accessories & connection . Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge.(Havels/HPL/crompton/ bajaj/ C&S)
5
4155
831
... More
Supply & fixing of SITC IP 20 Non-integral flexible LED strip light(IN/OUT DOOR),High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic /PHILIPS/Wipro/Havells/ Crompton/ S.S. )
1
2744
2744
... More
Supplying and fixing of small focus light for small monuments as 24W round projected , as per direction of Engg.-in-Charge Make : (Panasonic /PHILIPS/L&T/WIPRO / Havells/ Crompton/ S.S).
2
6910
3455
... More
Supplying and fixing of small focus DOWN Surface light for small monuments as 12/15W , as per direction of Engg.-in-Charge Make : (Panasonic /PHILIPS/L&T/WIPRO / Havells/ Crompton/ S.S).
6
7380
1230
... More
Supplying, Erection, Fixing, connection & testing of 80 W LED high bey Light comprises of Die cast housing of IP 65 protection and . in double height for inspection as required & as per direction of Engg.-in-Charge. (Make: WIPRO/ Panasonic/ PHILIPS/ Bajaj/Lighting Technology/Havells / Crompton/ S.S)
2
7100
3550
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of 6 Way (8+18) double door TPDB with 63 Amps 4 pole MCB 1no ,SP MCB 18 nos , including all accessories & connections cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge (Havell/Indoasian/SS/ C&S)
1
14255
14255
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
1
1961
1961
... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ Indoasian/ C&S/ S.S) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
2
688
344
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB Make-LEGRAND/ Siemens/ Schneider/L&T/ Havells/ Indoasian/ C&S/ S.S) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge
40
5720
143
... More
(Earthing) INSTALLATION
supply & installation of (i)Code No. MES- 80(3mtrs)( G.I) Maintenance free Safe Earthing ElectrodesCPRI Certified with ISI G.I.pipedia 75 mm as secondary electrode of wall thickness 3.6 mm and the primary Earthing Electrode will be 50mm x 6mm x 1nos G.I strip filled with a highly conductive & non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 7,06,500 for 3mtrs.length and Cross Sectional Primary conducting area is 300 sq.mm And solid G.I base plate seals the unit at the bottom, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
2
39258
19629
... More
supply & filling of Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag. complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
1
1742
1742
... More
supply & Laying of 30×5 G.I Strip, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc.
20
4560
228
... More
Providing and fixing 8 SWG copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
100
10900
109
... More
CABLING AND END TERMINATION MAIN AREA
supply of 4core x 16 sq mm (store)Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
120
27480
229
... More
supply of 4 core x 4 sq mm (for small power) Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
100
8787
87.87
... More
supply of 3.5core x 35 sq mm (garage/gallerry) Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
100
39900
399
... More
supply of 3.5core x 95 sq mm (Production building ) Aluminium Armoured cable, complete with all accessories as requirement at site, including cost & conveyance of all materials labours all taxes etc. (Polycab/ RR/ Finolex/ Havells/ S.S/ Gloster)
100
47100
471
... More
LAYING OF CABLE
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
50
7700
154
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
65
11375
175
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
61
3416
56
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
56
4312
77
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
56
2520
45
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
54
3294
61
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
47
4841
103
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
25
3950
158
... More
Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
4
916
229
... More
Supplying and making end termination with 3.5 core x35 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
2
798
399
... More
Supplying and making end termination with 3.5 core x95 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
2
942
471
... More
Providing,fixing and laying of 50 mm dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. (jindal / TATA/ S.S)
5
2165
433
... More
Providing,fixing and laying of 80 mm dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. (jindal / TATA/ S.S)
5
2475
495
... More
Providing,fixing and laying of 200 mm dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
10
8500
850
... More
PANELS Panel for Production
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint, complete in all respects as required with As Incoming 160 Amps fore pole MCCB , for out going connection etc. 4strip200 amps copper BUSBAR mounted on special type insulator 2set, Indicator 3 nos & toggle switch three nos,digital meter for voltage, amper & frequency, & for Out Going , 63A 4P MCB 04 NOS FOR POWER BDB L/P , 04 nos 32A 4P MCB AC IDU BDB/LIGHT , etc, complite with all accessories & Connection. Including cost and conveyance of all materials labours all taxes etc all complete as per the direction of Engineer in charge. (Make:-Make-Make-Havells/legrand/C&S /L&T/ Indoasian/ or S.S)
1
65777
65777
... More
CABLE TRAY PERPORATED TYPE FOR DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
10
5948
594.86
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
10
6900
690
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand / S.S)ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
8
7304
913
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 34mm(H) x 225mm(W), of Legrand / S.S) ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
30
53430
1781
... More
EXTERNAL ELECTRIFICATION PUMPS AND APPURTENANCES
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 450 LPM at 35 mm head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge (Make:PUMP:KBL/ Grundfos / KSB/ Wilo)
1
147921
147921
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of. One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.
One (1) - Set of Auxilliary relay for automatic operation through pressure switch.
1
35401
35401
... More
PIPE & VALVES ETC
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.
-
-
-
... More
150mm NB
40
164800
4120
... More
100mm NB
12
34428
2869
... More
WET RISER SYSTEM
Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.
1
8078
8078
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.
1
4023
4023
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.
1
7068
7068
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.
1
5935
5935
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.
1
9701
9701
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
1
1431
1431
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC.
1
12630
12630
... More
PH PORTION
Supplying all materials, labour, T&P and providing and fixing to wall and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
20mm dia C-PVC pipe
8
2420
302.5
... More
25mm dia C-PVC pipe
12
4848
404
... More
Supplying all materials, labour, T&P and providing and fixing to wall and floor pvc pipes conforming to ASTM-D-1785/2004 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall and floor all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
32mm dia PVC ASTM Pipe
14
4505
321.8
... More
25mm dia PVC ASTM pipe
9
2200
244.5
... More
50mm dia PVC ASTM Pipe
30
15780
526
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
7
475
67.9
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
5
1206
241.3
... More
Supplying all materials, labour, T&P and cutting grooves Brick in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
20
4378
218.9
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.(C.P.fittings are (Plaza/zigma/zen make)
-
-
-
... More
15mm dia CP angle stop cock
4
3740
935
... More
20mm dia CP concealed stop cock
1
1130
1130.7
... More
15mm dia CP two in one bib cock
1
1306
1306.6
... More
Health Fussed (1mm P.V.C tube with wall Hook)
1
878
878.8
... More
15mm dia CP extension piece
4
520
130.1
... More
C.P Flange Big Size
4
406
101.6
... More
15mm dia CP Pillar cock
2
1802
901
... More
15mm CP spereader
1
888
888
... More
25mm UPVC Ball valve (SCH-80)
3
1623
541.26
... More
32mm UPVC Ball Valve (SCH-80)
1
962
962.32
... More
50mm UPVC Ball valve (SCH-80)
1
1672
1672.45
... More
15 mm dia CP Long body Bib cock
3
2964
988
... More
32mm PVC waste Coupling
4
423
105.97
... More
32mm PVC waste pipe
3
374
124.99
... More
32mm C.Pwaste
3
1140
380.2
... More
15mm PVC connection pipe
4
464
116.13
... More
125mm C.P Grating
6
580
96.7
... More
Providing all materials labour T&P for fitting & fixing in position of half back stall type Magnum (G) urinal with necessary fittings including the cost ,conveyance taxes royalties of all materials and cost off all labours T&P required for the work etc. complete in all respect as per the direction of Engineer in –charge
1
6679
6679.7
... More
Supplying all materials, labour T&P for fitting & fixing of 10 liter. Capacity PVC low level cistern of any approved brand, PVC connection pipes etc all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours all taxes T&P etc all complete(Parryware/Nycer/Cera)
1
1948
1948
... More
Supplying all materials, labour, T&P and fitting and fixing PVC SWR pipes and fittings of the following with suitable clamps as per specification and direction of the Engineer in charge.
-
-
-
... More
110mm O.D PVC SWR pipes (Type-B)
51
26514
519.9
... More
75mm O.D PVC SWR pipes (Type-B)
24
8985
374.4
... More
110mm PVC SWR 'P' trap
6
2358
393.1
... More
110mm PVC SWR Tee
5
1581
316.3
... More
110mm PVC SWR Plain Bend
8
1660
207.5
... More
110mm PVC SWR single Y with Door
5
2215
443.1
... More
75mm PVC SWR Door Bend.
10
1440
144
... More
75mm PVC SWR Plain Bend.
10
1146
114.6
... More
90mm dia Nahin trap
2
317
158.7
... More
110mm dia Vent cowl.
2
125
62.5
... More
W/C connector
5
1596
319.2
... More
PVC Clamp suitable for 110mm dia pipe
12
828
69
... More
Supplying all materials labour T&P for fitting & fixing earthen ware white glazed squatting (Ladies) urinal foot plate with integral flashing confirming ISI specification including embedding squatting urinal foot plate WITH white cement finishing at top of urinal foot plate etc. Complete etc. complete as per (PH) specification. And as per the direction of Engineer in charge Cost and conveyance of all materials labours all taxes T&P etc all complete. (Parryware/Nycer/Cera)
1
3321
3321.6
... More
Supplying all materials labour T&P for fitting & fixing of E.W.C Commode (S) Trap with seat cover as the direction of E.I.C. (Parryware/Nycer/Cera)
1
3132
3132.7
... More
Fixing plastic seat and cover for wash down water closet with chromium plated hinges and rubber buffers all complete as per specification.
1
791
791.1
... More
Supplying all materials labour T&P for fitting & Fixing Wash Hand Basin and making good the damages etc all complete as per specification(Nycer / Parry ware/ Cera (white).
2
6034
3017.1
... More
Pedestal
2
5243
2621.9
... More
Supplying all materials labour T&P for fitting & fixing of Mirror of Size (24” x 24”) of Belgium/Golden fish Brand with supply of pluges screws & necessary Fittings etc. complete.
2
1805
902.6
... More
Supplying all materials labour T&P for fitting & fixing of Towel Rail including polishing the towel rail and all necessary materials all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours & T&P etc all complete.
-
-
-
... More
20mm x 600mm CP towel rail
2
2142
1071.4
... More
Supplying all materials labour T&P for fitting & fixing of C.P Towel Ring including polishing the towel rail and all necessary materials all complete as per the direction of Engineer in charge Cost and conveyance of all materials labours & T&P etc all complete.
2
1093
546.8
... More
Supplying fixing & fitting in position of C.P ( 6”x 6”) Soapdish including the cost, conveyance taxes royalties of all materials and cost off all labours T&P required for the work etc. complete in all respect.
2
596
298.1
... More
Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification.
1
1133
1133.7
... More
Providing fitting and fixing of Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position with construction of Brick masonry staging for installation of 2000 liters capacity 3 Layer white PVC Tank with fly ash brick work with C.M (1:6) up to required. Height & length & plastering with C.M (1:4) and providing RCC slab and RCC beam with RCC (1:1.5”3) using 12mm HG chips including centering & shuttering & providing 1st class fly ash brick work with C.M (1:6) circular dia over the slab to support the tank including conveyance of all materials to work site watering all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Triple Layer (White) Cylinderical Vertical water storage tanks (2000 ltr ) = 1 nos
1
45472
45472.1
... More
Providing all materials labour T&P for construction of brick mosanary Gully Trap chamber with earth work in excavation base metaling C.C (1:4:8) Fly Ash bricks having crushing strength not less than 75 kg /cm2 with plaster 12 mm Cement Plastering CM (1:3) with supply of (300mm x 300mm) size C.I grating or RCC Cover including fitting & fixing of gully trap with supply of all jointing materials etc complete as per the P.H Specification and direction by Engineer in charge .
2
4914
2457.3
... More
Providing all materials, labour T&P for Construction of Inspection Chamber with CC(1:3:6) on bed with hard granite metal 25mm to 50mm brick work with Fly Ash bricks having crushing strength not less than 75 kg/cm2 in cement mortar (1:6) CC roof slab with CI MH cover molding champing & channel benching with CC (1:2:4) with BHG chips size 20mm to 12mm. (15mm) thick (1:3) including cement painting inside and cement flush pointing (1:3) out side the chamber EW in excavation in all kinds of soil & refilling the cavity around the chamber etc. complete as per (PH) specification. Complete as per the direction Engineer in charge. Cost and conveyance of all materials labours & T&P etc all complete.
3
26442
8814.2
... More
Providing all materials, labour T&P for Construction of Soak Way Pit of internal dia meter 4’- 0” (dia) & 7’-00 (deep) including 1’-00 height from ground level providing precast 4’-0” RCC ring to soakpit & filled with by brick khoa including earth work in excavation & RCC cover, including all materials labours T&P all taxes royalties etc complete in all respect as per the direction of Engineer in- charge.
1
15225
15225.6
... More
Providing all materials labours T&P for fitting & fixing of 10mm to 20mm Thick Granite partition of Size with including cost, conveyance, royalty all taxes cost of all labour all materials T&P etc all complete as per P.H. specification and direction of Engineer in –charge.
0.72
2108
2928.21
... More
Providing all materials labour T&P for PCC (1:4:8) in foundation bed using 40mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing etc compacting to required level laid in layers not exceeding 6” thick including cost conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in-charge Cost and conveyance of all materials labours.
0.6
3352
5587.3
... More
Providing all materials labour T&P for PCC (1:2:4) in foundation bed using 12mm & below size b.h.c.b granite stone chips of approved quality from approved quarry including lowering laying concrete watering & curing etc compacting to required level laid in layers not exceeding 6” thick including cost conveyance all taxes royalty & cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in-charge Cost and conveyance of all materials labours.
3.12
24049
7714.33
... More
12mm thick cement plaster in C.M.(1:4) finished smooth to brick walls after racking out the joints with two coat of SIKA latex mixed through (1:4) iincluding slurry treatment & deep chipping over wall surface including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges
13.7
5267
384.5
... More
Fixing tiles & Glazed /Ceramic in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles etc. complete in all respect as per the direction of Engineer in charges
6.1
5807
952.13
... More
Fixing tiles & Glazed /Ceramic in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.complete in all respect as per the direction of Engineer in charges
19.3
15724
814.73
... More
12mm thick cement plaster in co (1:4) with neat in all floors finished to brick walls in skirting after racking out the joints including watering, curing, etc complete with cost conveyance taxes and royalties of all materials & labours T&P required for the work etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
32.7
6586
201.43
... More
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. (per one Sq. Mtr.) (Data for 10 sqm.) INCLUDING COST OF MATERIL &Labour
13.36
1117
83.68
... More
Painting 1 coat with approved primer to wall ( INCLUDING COST OF MATERIL & Labour etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
13.36
1077
80.62
... More
Wall painting TWOcoats with plastic emulsion paint of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
13.36
1433
107.28
... More
M.S.Window Grill made out of M.S.flat conforming to IS:2062/2006, painted with red oxide primer as per the design approved by the purchaser.
15
1002
66.83
... More
Priming one Coat on Steel INCLUDING COST OF MATERIL & Labour etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
0.5
37
74.52
... More
Painting two Coats with approved Synthetic Enamel paint on new wood / iron work INCLUDING COST OF MATERIL &Labour etc complete in all respect as per the direction of Engineer in-charge Cost and conveyance of all materials labours & T&P etc all complete.
0.5
92
185.3
... More
Providing all fitting and fixing of UPVC Door of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures for the work complete in all respect as per the direction of Engineer in charge.
3.36
29171
8682.12
... More
Supplying, fitting and fixting of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures,
0.5
2480
4960.97
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Production well.
2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
1
18643
18643.24
... More
Star Delta controll pannel
1
4661
4661.46
... More
2.50sqmm cable
50
6405
128.1
... More
32mm dia steel short piece
1
152
152.3
... More
Steel rope with cover
50
1335
26.7
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
2
182
91.3
... More
20mm dia rigid UPVC pipes
50
345
6.9
... More
Sinking & commissioning of 200mm x 150mm bore well Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required to suit the site condition with the use of own rigs with its accessories, tools and plant, and consumables etc., for lowering of dia P.V.C. fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I./ P.V.C. casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).
-
-
-
... More
Drilling of 200mm dia bore - 0.00 Mtr. to 45.00 Mtrs.
45
44415
987
... More
Drilling of 150mm dia bore - 46.00 Mtrs to 90.00 Mtrs
45
44415
987
... More
Lowering the following size PVC pipes with or without slotted pipes as per the necessity from ground level upto 40 mtrs depth and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.
-
-
-
... More
Lowering of 200dia – 0.00 Mtr. To 45.00 Mtrs.
35
8050
230
... More
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labours per the direction of Engineer-in-charge.
-
-
-
... More
Developing the tube well – 1 item
1
8129
8129
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around PVC housing pipe up to 5 mtrs. below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge. Minimum one mte, of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing .
-
-
-
... More
Sanitary sealing upto 5.00 Mtr below ground level – 1 Item.
1
379
379
... More
Providing 200 mm dia PVC pipe of schedule -80 conforming to ASTM-D- 1785 to use as casing pipe in overburden portion to prevent collapse including cost of transportation etc. complete.
36
82456
2290.46
... More
Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore in good condition.
36
16848
468
... More
Construction 1 no 25 users RCC Septic tank
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
13.73
4077
297
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
0.79
410
518.07
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
0.79
4425
5587.3
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
0.53
4073
7714.33
... More
Providing all materials labour T&P for Fly Ash brick masonry work in cm (1:4) brick Fly Ass brick (25x12x8cm) having minimum crushing strength not less than 75 kg /cm2 after immersing the bricks for six hour in water before use in F&P including splays cutting & circular mouilding, hoisting,, watering, curing etc with cost of all labour T&P for the work in all respect as per the direction of Engineer in-charge. Cost and conveyance of all materials labours & T&P etc all complete.
7.34
43064
5871.09
... More
Reinforced Cement concrete work of M-20 grade concrete with 20 mm down graded crusher broken hard granite chips including hoisting lowering laying concrete and compacting by using vibrators watering curing for 28 days centering shuttering & finishing the expose surface smooth providing groves beads whether necessary including cost convince taxes & royalty of all materials & cost of all labour T&P hire charges of concrete mixture machine & vibrator machine required for the work etc. Complete in all respect but excluding the cost of MS rod of for steel & binding wires & labour charges for cutting bending binding tying the grills. As per the direction of Engineer in-charge. Coat and conveyance of all materials labours T&P etc all complete.
0.66
9136
13843.55
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.53
4556
8629.41
... More
Supplying all materials,labour,T&P and providing 12 mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
36.29
8827
243.25
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
1
316
316.6
... More
450x450mm Square C.I Size Cover (30.00 Kg)
2
6184
3092.2
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
13.73
2265
165
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements