Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,70,680Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OTDC_70730_1Bid Award Id
ViewTender No
BP -I/10/2021-22 dt.25.08.2021Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
1
-
393.7
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
32.17
-
114
Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.
48.24
-
173.8
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
-
-
-
GROUND FLOOR
157.79
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
3.65
-
4630
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
25.55
-
5986.2
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
GROUND FLOOR
-
-
-
Foundation & bases of column
10.08
-
5393.4
Plinth Beam
8.91
-
5829.4
Pedestal & Columns
6.91
-
11052.5
Roof Beam
9.44
-
11052.5
Lintel
1.12
-
8982.2
Chajja, loft, kitchen platform , fins, coping & sill slab
4.13
-
815.7
Roof/ Floor slab
8.6
-
9594.2
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
-
-
-
GROUND FLOOR
80.86
-
7903
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
29.73
-
4151.1
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
38.13
-
4184.4
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
10.28
-
4394.3
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
-
-
-
GROUND FLOOR
415.8
-
216.1
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
GROUND FLOOR
141.92
-
141.2
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
70.78
-
155.3
Providing 20mm thick and above 0.40 Each Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
10.56
-
2045.9
Providing 20mm thick of above 0.40 Sqm granite tile dado of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
0.9
-
2057.8
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
14.55
-
237.6
Providing 30cmx30cm/40cmx40cm size special plain/printed series ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.(SOMANY,KAJARIA, JOHNSON, NITCO,OASIS & RAK OR EQUIVALENT)
-
-
-
GROUND FLOOR
29.23
-
986.1
Providing 30cmx45cm size special plain/printed series edge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and , cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge..(SOMANY,KAJARIA, JOHNSON, NITCO,OASIS & RAK OR EQUIVALENT)
-
-
-
GROUND FLOOR
283.76
-
935.6
Providing and fixing factory made sing extruded WPC(Wood Polymer Composite) Frame size 60x125 mm solid door/windows/Ceasetory windows & other Frames/Chowkhat comprising or virgin PVC polymer of K value 58-60(suspension Grade), calcium carbonate and nature fibers(wood power/rice husk/wheat husk) and non toxic additives(Maximum toxicity index of 12 for 100gms)fabricated with miter joints after plying PVC solvent cement and crewed with full body threaded star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawal strength of 2200 N (Face) & 11 N (Fdge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of frame Class A category with property of being termite/barer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in Charge(M.5 hold fast/lugs or SS dash fasteners shall be paid for separately).Note: for WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
GROUND FLOOR
15.3
-
1217
Supplying fitting and fixing in position flush door using 32mm thick BWR Block Board of approved quality of Green / Mayur / Aeon or equivalent with providing 1mm sun mica (Royal touch) both sides of approved quality and as per drawing & design with all necessary brass fittings, door closer (Godrej, heavy duty) motrice lock (Godrej heavy duty), handle, door stopper etc including all required hardware with cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.
-
-
-
GROUND FLOOR
5.67
-
7035.4
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
GROUND FLOOR
216
-
71.1
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive paintingncluding cost, conveyance, loading and unloading and , cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
486.58
-
71.8
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
486.58
-
135.3
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and , cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
141.92
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
GROUND FLOOR
7.2
-
187.6
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, , T & P etc. required for the complete in all respect as directed by the Engineer-in-charge.
109.94
-
333.7
Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished)
189.42
-
137
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
-
-
-
GROUND FLOOR
4.32
-
6912.15
Providing,fitting & fixing factory made u-PVC casement cum fixed panel window having both end single casement panel,middle fixed panels & at top completely fixed ventilator with SS friction hinges(350x19x19)made of big series frame 67x60mm,sash67x80mm,& mullion 67x80mm all having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc. complete as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
2.88
-
6478.75
Providing,fitting & fixing of premoulded decorative corner beading of gypsum having cross sectional dimension 112x80mm & fixing the wall etc complete as per direction of EIC.
-
-
-
GROUND FLOOR
57
-
399.5
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
10
-
339.1
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, , cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
107.17
-
295.1
WATER SUPPLY & SANITARY WORKS
-
-
-
Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.
8
-
14670.7
Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
4
-
10110.8
Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
5
-
1086.8
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
14
-
1373.4
Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
9
-
2160.8
Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
9
-
1579.7
Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
19
-
2361.5
Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
5
-
1856.1
Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
5
-
1792.7
Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
14
-
1183
Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
9
-
1705.6
Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
17
-
93.1
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Piller cock of Jaquar Cat. No.-KUP 35001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
4
-
1960.4
Supplying all materials, labour, T&P and fixing standard size of 100mm dia. over head shower of jaquar cat no. -OHS 1989 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
10
-
1440
Supplying all materials, labour, T&P and fixing wall mixture hindware / jaquar cat no. -Con217 kn or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
10
-
3917.85
Providing and fixing white glazed urinals 26.5 x 31.5 x 44 cm Hindware (Cat no- 60011 Eqv OF Cera/ parryware) including plumbing connections with CPVC pipefrom the water supply line to the urinal complete and concealed C.I. brackets, C.P. flush pipe, 15 mm Dia. 1no C.P. spreaders, 1 Nos. C.P. waste coupling with 1 Nos.waste pipe , 1 No PVC P/S Trap with stainless steel grating in floor. Jointing, making good the damages caused to walls & floors, painting the brackets etc. Necessary pipes between urinal & main supply line to be included in the rates. Range of single urinal basin. cost including all materials, labour,tax, T&P, lead, royality etc.work complete in all respects as per direction of Architect incharge.
3
-
3285.6
Providing and fixing urinal glass partition of Jaquar JSE-CHR-810BR-US450X of sizeH-9Ocm & width 45cm including cost of all labour T&P etc complete as per direction of Engineer -in- charge.
2
-
4661.4
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
-
-
-
160mm dia PVC (SWR) pipe class "A" ( with wall thickness of 3.2mm to 3.8mm)
50
-
500.1
110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm)
70
-
264.2
75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm )
30
-
159.6
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification
120
-
367.9
Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge.
4
-
1931.57
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of ( AJAY/ ASHIRVAD/ ASTRAL) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
GROUND FLOOR
-
-
-
20 mm nominal outer dia Pipes
110
-
198.2
25 mm nominal outer dia Pipes
170
-
246.9
32 mm nominal outer dia Pipes
20
-
347.8
40 mm nominal outer dia Pipes
25
-
472.7
50 mm nominal outer dia Pipes
30
-
687
Cutting grooves in pucca floors and walls for taking GI/PVC /CPVC pipes including making good the damages caused with cost of all material,labour, scafolding, tools, plant, royalty etc. complete in all respects.
250
-
166
Supplying & Fixing two way Bib cock of CP brass of Jaquar continetnal cat no- CON-039/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
9
-
2160.8
Supplying & Fixing concealed stop cock of CP brass (Jaquar cat no-CON-069 , continental / eqv of crabtree / lauret) including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
3
-
1078.1
Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KB Brick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4) 30cm depth in bottom of chamber with 1/2" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3 & neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
-
-
-
Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension.
4
-
8505.3
Plain manhole inside 1200x900and 900mm deep with cast iron manhole and frame(medium duty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg.
4
-
14566
Providing and fixing 40mm dia gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
4
-
1971.5
Providing and fixing 50mm dia gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
4
-
2925.1
Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
20
-
44.75
Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)
2
-
24316.1
WATER FILTER
-
-
-
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
-
78254
Supplying, fitting & fixing of Hindware water closet (EWC Pan P-18) Mat Code-70002, wash basin (size-46cm x 36cm) with one pair mounting bracket, EWC & cistern complete with fittings and seat cover, one no. hinged rail 76cm & 4 Nos. of grab rails 60cm brass brackets. etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications.
1
-
74796.85
INTERNAL ELECTRICAL WORK
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
7
-
569.15
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
7
-
794.9
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
10
-
1078.05
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.0 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
-
402.15
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.0 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required.( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
2
-
621.75
Supplying and fixing of 4 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 20 amps socket outlet and 20 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
2
-
613.7
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
50
-
126.55
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
100
-
140.65
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
100
-
165.85
2 Nos. Single Core 10.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 4 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
80
-
261.34
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door MAKE:LEGRAND,L&T,HAVELLS)
1
-
1912.5
Supplying and fixing following rating, double pole, (single phase
and neutral), 240 V, residual current circuit breaker (RCCB),
having a sensitivity current 300 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
-
-
-
25 amp 2pole RCCB
1
-
1045
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
8
-
131.4
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
7
FITTINGS & FIXTURES:
-
-
-
Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. Make- Havells,BAJAJ,wipro,Philips
-
-
-
Supply, Installation,Testing & commissioning of surface and wall mounted 18 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
2
-
953
Supply, Installation,Testing & commissioning of 18 watt Surface mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
14
-
2624.41
Supply, Installation,Testing & commissioning of surface and wall mounted 10 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
10
-
728
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge(Make-Havells / Bajaj /Crompton or Equivalent)
-
-
-
200 mm EXHAUST FAN Plastic body
6
-
2263.45
450 mm EXHAUST FAN 1400 RPM.
2
-
5364.65
EARTHING:
-
-
-
Providing and fixing 25 mm x 5 mm Copper earth strip surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
BORE WELL
-
-
-
Sinking of 200mmx 150mm dia Tube well through DTH Rig.
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
0 mtr to 30mtr
100
-
960.6
Drilling of 150mm dia bore
-
-
-
30mtr to 120mtr
140
-
890.8
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 150mm dia P.V.C casing pipes
240
-
1655.3
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH/Rotary Rig
2
-
7953.9
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
Sanitary sealing upto 5mtrs below ground level.
10
-
335.7
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
40mm dia brass or gun metal Non-return valve
2
-
1958.2
Supplying submerssible pump cat no: KS4AN-1518 1.5 H.P single phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
2
-
22174.75
DOL controll pannel ( Kirloskar CSCR 1.5 HP/1PH KS4 )
2
-
3040
4.00sqmm cable
120
-
191.1
32mm dia steel short piece
4
-
152.3
Rope with cover
120
-
26.7
Well cap
2
-
152.3
50mm size CI bracket
4
-
91.3
40 mm dia HDPE Pipe
120
-
106.2
DRAIN
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
72.9
-
205.3
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
14.58
-
114
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
9.72
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
9.72
-
4630
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
Foundation
8.1
-
5393.4
RCC Wall
24.3
-
9680.2
Slab
8.1
-
9594.2
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
40.5
-
7903
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
162
-
216.1
SEPTIC TANK & SOAK PIT
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
126
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
50.4
-
393.7
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
36
-
14.8
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
50.4
-
114
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
6
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
9
-
5295
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering etc. complete in all respect as per specification and direction of Engineer-in-charge.
9
-
5242.1
Providing strong, rigid, leveled, and plumbed centering and shuttering to required shape and size , for floors with ply or steel centering materials with all necessary bracing and tiles and supports with leveling centering covered with plastic sheet with provisions necessary holes and pockets for electrical conduits, pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas upto 4.3m height
60
-
429.1
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
6
-
7903
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
53.63
-
4151.1
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
231
-
193.9
Providing neat cement punning over plastered/ concrete surface including watering and curing complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. as directed by the Engineer in charge.
462
-
31.5
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
60
-
155.3
Supplying & Fixing of Manhole cover ( heavy duty ) 450mm x 450mm water tight type including frame cost includes all material,labour, tax,lead tools & plant etc. complete
4
-
2500
Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge
4
-
12805.5
PATHWAY LIGHTING (STREET DECORATIVE POLE)
-
-
-
Supply, installation, testing & commissioning of 3 mtr long aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder fnish.The Pole shall have base Plate with provision for founation bolt fittings and inbuilt suitable Pole Fuse Box for Loop In and Loop Out Cable heavy duty cable connector, 6 Amp. SP MCB with Water proof cover on Pole Fuse Box.Compatible for all suitable size for cable entry & exist as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Havells / BAJAJ/CG
20
-
19046
Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole. Suitable for pole dia Ø 76 mm etc complete with connection from terminal in the pole, complete with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of Engineer-in-Charge.Make: Havells- Ruby / BAJAJ /Wipro
22
-
11325
Construction of RCC foundation of 1950 x 650 x 650 mm size by using M25 brade RCC and Fe-415 grade steel reinforcement .The scope of work includes necessary excavation of soil and back filling after completing the foundation work, fixing the EN 8 grade J type foundation bolts and 63 mm dia PVC /HDPE pipe inside the foundation for cable entry. The Biddershould execute the work as per the attached foundation drawing and direction of EIC.
20
-
5173.8
Supplying, storing, laying, testing and commissioning of 4c x 6Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
280
-
237.55
Supply, delivery, laying, testing complete as required & as per the direction of Engineer-in-charge of 3 x 4sqmm FRLS PVC Insulated cooper conductor cable with its protection pvc pipes with excavation of cable trench in all kinds of soil & rock and back filling with excavated soil from panel to pole. The cable shall have ISI marking and name of the manufacturer on the body of the cable
100
-
242.55
Supply, installation, testing and commissioning of street light control panel (Floor mounted outdoor type) made out of 2mm thick CR sheet enclosure with 1 no. 63 Amp 4P MCB as incomer and 3 nos 32A 4P MCB, and suitable timmer switch as outgoing 3 phase 4 wire, 10-40A static type tested KWH Meter inside tamper proof locking arrangement , time switch and contactor for automatic on/off of the lights and suitable arrangement for 3 ½ x 25 mm2 cable for entry /outgoing of 4c x 16mm2 cable, complete with locking arrangement as required as per technical specification and instruction of EIC.
1
-
26876
Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing studs/ bolt of the pole complete including supply of all materials.
20
-
250
Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
40
-
283.2
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
12
-
458.8
Supply & laying of 50mm size (M) G.I. pipe for cable passing through the road with necessary fittings as required as per the direction of EIC.
5
-
450
FAÇADE LIGHTING
-
-
-
Supply, installation, testing & commissioning of LED strip light 24V, power consuption 12W/Mtr, 60 watt LED/Mtr, protection rating IP65,Color:RGBW and fixing arrangements to fix the lights.Roll of 5 mtr. (Without DC Power Drive) Code: LK STP 12 RGB etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
60
-
1144
Supply, installation, testing & commissioning of high quality spot light, Power:3W, CCT:3000K/5600K/Amber, Protection Rating:IP65 ,additional wall mount yoke arrangements for fixing the lights.Beam Angle15º/25º ,Body:Diecasted/extruded aluminium,Optics Designed to minimize hotspots.Power Input:DC 24V (without DC Driver) Code:LK SL 03T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
5
-
1614
Supply, installation, testing & commissioning of High quality 4way star light Protection Rating:IP65,with wall mount arrangement for fixing the lights.Power:4x2W,CCT:3000K/5600K ,Beam Angle 5º,Body: Diecasted/ extruded aluminium,Optics Designed to minimize hotspots & fringing incolor mixing applications. Power Input : AC 220V, 50Hz. Code: LK 4WAY 08T/D/A etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
2
-
13264
Supply, installation, testing & commissioning of high quality two way decorative light,Power:12W,CCT:3000K/5600K, Protection Rating:IP65, additional wallmount yoke arrangements for fixing the lights. Beam Angle 15º,Body:Die casted/extruded aluminium,Optics Designed to minimize hotspots. Power Input : AC 110-230V, 50Hz. Code: LK 2WAY 12T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
4
-
10611
Supply, installation, testing & commissioning of PVC insulated multicore electrical un armored flexible 3Cx1.5Sqmm powercable having less electrical losses.This PVC insulated and round sheathed wire featuresabright multistrands copper conductors and it supports voltage grade upto 1100V etc complete as per the direction of Engineer-in-Charge.( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
150
-
91
Supply, installation, testing & commissioning of 5core DMX cable comprises twisted pairs with shield support for carrying of data.DMX 512cable isused for connecting all light consoles that use DMX512 standard data transmission etc complete as per the direction of Engineer-in-Charge.
100
-
88
Supply, installation, testing & commissioning of IP65 "T" power connectors easy and extremely precise locking system.High impact materials-long-lasting and reliable etc complete as per the direction of Engineer-in-Charge.
12
-
996
Supply, installation, testing & commissioning of IP65 "T"DMX connectors having 3/5 polecable connector,Male/Female connector with improved latch,cage type contacts,"solder stop"for easy soldering,and additional ground contact for best contact integrity between chassis and cable connector.More durable housing for maximum reliability etc complete as per the direction of Engineer-in-Charge.
5
-
1659
Supply, installation, testing & commissioning of Power Distribution Board made up of MS Sheet metal fabricated housing blackpowder coated an divery connectors for the internal terminations and external outgoing connecting points,fibre/brass glands of suitable size fitted MCB control for outgoing circuits.- 9 Nos of 6/10A SP Outgoing MCB's.- 1No of 16A TPN Incoming MCB etc complete as per the direction of Engineer-in-Charge.
1
-
25000
Supply, installation, testing & commissioning of waterproof power junction box/powercable terminal box,IP65 made up of rugged,non-corrosive,high impact polycarbonate,moldednylonen cases connectors that use screw compression to secure the wires,protection against waterjets and dust from all directions,includes 5Way min 10A connect or terminal block Max. dimension : 80 * 250 * 85mm etc complete as per the direction of Engineer-in-Charge. Make Hansel or Equivalent
3
-
1201
Supply, installation, testing & commissioning of DMX isolator or splitter provides Isolate do ptical DMX splitter provides 8 outputs from a 1 input and Input voltage:AC 110 to 220V,50Hz,Product features: Group 1 & group 8 DMX signal change etc complete as per the direction of Engineer-in-Charge.
1
-
30000
Supply, installation, testing & commissioning of DmX Controller 12 Faders to controlat least 12channels with master control fader, scene saving option,LCD display,smooth movement faders,easy access keypads,12 Physical Fader unit for direct access,DmX 512 protocol,Incremental Channel Up&Down Buttons,Slow blow safety fuse,optional chase & multifunction keys. Code: LK CX-3 etc complete as per the direction of Engineer-in-Charge.
1
-
80692
Supply, installation, testing & commissioning of additional accessories for installing the lights asper the final drawing/ site condition consisting of clamps, brackets, angles, conduites ,joints,hardwares like fasterners, nut & bolts etc complete as per the direction of Engineer-in-Charge.
1
-
66700
PARKING LIGHTING (12.5 MTR HIGH MAST LIGHT)
-
-
-
Supply delivery installation and testing of 12.5 mtr long semi highmast
galvanised lighting mast of thickness 3.1 mm having pole dia
150 mm at top & bottom dia 350mm base plate of 25mm thick having
pole arrangements for fixing of 04 no 25mm dia 750mm long
foundation bolt complete resistance to wind speed as per is-875 ,
part-iii , octagonal shape complete assembly containing inner &
lantern ring 06 way , 3 way frp Junction box with the bottom single
drum winch 03 no.s 4 mm dia steel wires disc 6mm wire single from
compensating disc to winch 1-1/4" dia 750 mm dia foundation bolts
etc.as required provision for 06 no.s 200w LED Light luminaries .The
mast will have both manual & motorise system to be operated at 3
phase 440 volt with aviation light arrangements & complete as per
the site requirements of approved make as per the direction of Engineer-in-Charge.( Bajaj/Velmont)
1
-
250000
Supply of raising lowering system comprising double drum winch, 5mm dia meter SS wire rope, trailing cable, connector,integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from junction box to individual luminaire & MCB in base compartment are not included and are a part of installation).of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
65500
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template etc. as required. as per the direction of Engineer-in-Charge..
1
-
7600
Construction of suitable shallow foundation M24 x750 (6 Nos.)with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capasity at site as 10T/sqm. At 2X2 mit. Depth with all materials and labour charges (as per drawing) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
36000
Erection of 12.5 m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
18000
Supplying and erection of LED avition obstruction light Lumainair ( Bajaj 110731) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
4480
Supplying and fixing double door MS feeder piller box with near the high mast towerProviding the following component ( switching acc.) inside the fidder piller including internal wiring all. Complete for autometic , timely OFF/ON for operating of (6 to 8 nos) 200 LED lighgting fitting. i)63 A 4 pole MCB isolater 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no,VIII) 6 AMP SP MCB 6 NOS of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
25000
Supply, Installation,Testing & commissioning of of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 200 watt flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
6
-
22000
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
Providing and fixing 25 mm x 5 mm GI earth strip in 40 mm dia G.I. pipe surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
12
-
458.8
Supplying, storing, laying, testing and commissioning of 4c x 10 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
60
-
269.3
25 KVA DG SET
-
-
-
Supply, installation, testing & commissioning of 25 KVA 3 phase Silent DG set with AMF Panel. The DG set must be latest CPCB approved of etc complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Jakson / Kirloskar/Ashok leyland
1
-
652530
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5285.9
25 KVA SUBSTATION
-
-
-
Construction of 3-ph., 3-wire 11KV line with 9 mtr 300Kg PSC Pole for Pin Point and two nos Cut points with double disc arrangement of 55mm AAAC. (80mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.3
-
316147.39
Supply & fixing of Construction of Double pole Mounted 11/.4KV Sub station using 9mtr. X 300kg long PSC Pole with double disc arrangement for 25KVA Transformer including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge. ( Electrical Inspection Should be done be Electrical Inspector both MV/HT and Report should be required before submission of Transformer Bill )
1
-
200414.28
Supply & fixing of Construction of 3-phase 50 sqmm AB Cable on 8mtr x 200Kg PSC Pole for LT line (30mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.25
-
588113.08
Supply & fixing of Barbed wire fencing boundary wall including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
17140
Providing metal spreading using 40mm metal including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
10000
PATHWAYS & PARKING
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
1000.5
-
205.3
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
500.2
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
32.2
-
4630
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
639.8
-
1414.3
Providing & fixing precast ,precured Cement Concrete [1: 1.5 :3 ] kerb stone [450 x300x175mm] with graded stone aggregates & fixing in position & pattern as shown in drawing in cement mortar [1cement: 6 coarse sand] & pointing in cement mortar [1cement: 2 coarse sand] including necessary excavation & filling side treanches etc. including cost of all materials, labour, tax, lead, T&P etc. complete in all respects as per the direction of Engineer/ Architect-in-charge.
358.4
-
85.22
Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking UNI PAVER pavers of 60MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
3334.94
-
896.8
SITE DEVELOPMENT,LAND SCAPING, BEAUTIFICATION & PROMENADE
-
-
-
PLANTER DEVELOPMENT (BOTH SIDE FROM MAIN GATE TO BUILDING AS IN THE DRAWING)
-
-
-
Supply of good earth for filling of planter box size (3ft X2ftX1ft X386=2316)
2316
-
10
Supply of and Planting of IXORA 'RED THAI DWARF’ inthe planter in two rows in a distance of 1.5ft from plant to plant (386 ft X 2 rows) including supply and application of compost, pesitcide etc complete
850
-
60
3TIRE GREEN BELT DEVELOPMENT ALONG THE BOUDARY WALL
-
-
-
Digging of pit (0.6X0.6X0.6M) for all plants
750
-
17.69
Supply, mixing and refefilling of good earth
2500
-
12.12
Supply and mixing manure and pesticide complete
400
-
25
Stake of plants with bamboo stump- 6ft including tie of same
500
-
50
Supply and planting of plant Juniperus /Eugenia-4 to 5 ft Height in 18 x18 inch poly bag size
100
-
400
ficus reginald 5 to 6 ft 18 x18 inch poly bag size
150
-
500
Plumeria alba dwarf 5 to 6 ft 18 x18 inch poly bag size
120
-
400
Supply of fox tail plalm (Wodyetia bifurcata) 6 to 8 ft 18 x18 inch poly bag size
100
-
800
Supply of lagerstroemia indica (chena fula) 4 to 5 ft 10 x10 inch poly bag size
150
-
150
Lawn Development
-
-
-
LAWN DEVELOPMENT:-Preparing Lawn with lawn grass (zoysia japonica-carpet grass) obtained from a healthy and properly maintained the lawn (free from weeds and other foreign materials) and laying on the supplied soil medium with garden soil mixture of farmyard manure, river sand and red earth in appropriate ratio to an average depth of 0.15m, in dibbling method at the distance of 3 to 4 inch as per the location, drawings and specifications provided, including material cost of fertilizer, pestcide,lawngrass etc complete .Including three month maintenance
-
-
-
Excavation of existing land upto 0.5 ft
25000
-
4.8
Supply of good earth
40000
-
10
leveling and dressing , clearing of debrish etc complete
25000
-
1.2
Supply and spreading of sand
12000
-
10
Supply and apply of pesticide contol of termires and othe pests
25000
-
2.2
Supply and laying of zoysia grass /board leaf grass
25000
-
15
Permanent Flower Bed (4.5 X 20 ft 8 N0s) including supply and planting material cost plant(rose/ allmunda/ hibiscus ect flower , fertilizer, pit making and plantation complete.
8
-
2500
Supply and planting of ground cover wedelia/ tradescantia/ zephyranthes lily- 7 ft height in 18 X18 inch poly bag in a pit of 2ft X 2ft X 2ft including material cost plant, fertilizer, pit making and plantation complete.
950
-
40
Supply and fixing of brick (border of planter beds)
20
-
3900
Irrigation though sprinkler system
-
-
-
Supply and fixing of UPVC SH-80 pipes including plumbing , fittings, solvent cement complete with all respect as directed by EIC.
-
-
-
40 mm UPVC SH-80 pipes
50
-
313.3
20 mm UPVC SH-80 pipes
400
-
170.4
Supply, fixing and fitting of gear driven pup-up of reputed make HUNTER/Rainbird
20
-
1800
Supply, fixing and fitting of pup-up guard 4 inch SH-80 pipes of reputed make HUNTER/Rainbird
25
-
1050.8
Supply, fixing and fitting ofscreen filter of 25 mq
1
-
4500
Supply , fixing and fitting of 3hp open well submesible pumpset
1
-
30000
Supply , fixing and fitting of 40 mm upvc gate valve 4 nos
2
-
6000
Supply , fixing and fitting of 20 mm air release valve
4
-
1800
Supply , fixing and fitting of valve chamber
4
-
2200
Maintenance for First year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
2077
-
10
Weeding through out the year
2076
-
5
Mowing Every two months interval
2077
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
950
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
918
-
78
Maintenance for Second year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
5000
-
10
Weeding through out the year
5000
-
5
Mowing Every two months interval
5000
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
1500
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
1500
-
78
FRP
-
-
-
Providing Decorative Ornamental cement plaster like Bamboo/Bullaha/Straw/Plank design as per specification and didection of E.I.C.on structural wall or roof with the plaster is to be made of cement mortar of proportion (1:3) with cement oxide colour or any other approval material including cost,material,conveyance,and labour charges etc.
845
-
220
Consideration of R.C.C. Ornaments three trunk sitting chair 5'0'' length standingon cutting there with back rest as Bullhi or Bumboo design made of R.C.C.(1: 11|2: 3 )with adequate reinforce Cemeta finishing the structure with using Cement oxide paint involving all cost conveyance, royalty & texes of all materials compiled.
15
-
15000
Providing fitting and fixing of FRP Butterfly of average height 8 ft made of resin,accelaretator.catalyst,glass,fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
66700
Providing fitting and fixing of FRP Deer Family 3 nos of in average height4 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
33500
Providing fitting and fixing of FRP Elephant Family 2 nos of in average height 10 ft and of 5 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
138000
Providing fitting and fixing of FRP Tiger Family 2 nos of in average height 6 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
31050
Providing fitting and fixing of FRP Tree with Bird in average height 7 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
3
-
26450
Providing fitting and fixing of FRP Bear 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
3
-
20700
Providing fitting and fixing of FRP Dustbin ( Rabbit ) 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
8
-
6670
SIGNAGES
-
-
-
Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 3mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter/DIGITAL PRINTING SYSTEM the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge.
-
-
-
a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage of size 6'0" X 4'0" as per specification & direction of Enginner-in-charge
600
-
470
Required stainless stell frame of 80mm NB made out of 304 grade steel pipe including cost, all taxes , transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage
875
-
400
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying corncrete, ramming, watering and curing etc complete to required levels laid in layers not cxceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalities an dtaxed all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specifiation and direction of Engineer-in-Chrge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos
6.38
-
5986.2
PHOTOGRAPHY ZONE
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
6.07
-
205.3
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
2.43
-
114
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
32.44
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
8.66
-
4630
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
7.2
-
4151.1
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
20.44
-
141.2
Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking UNI PAVER pavers of 60MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
31.35
-
896.8
Providing and Fixing white fiber made Selfie point ( I Love SANAGHAGARA of 4 feet height ) as per design and specification with artifical tree and seven numbers wild Monkey on it as per the direction of The architect
13
-
8900
Providing 20mm thick and above 0.40 Each Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
24
-
2045.9
Providing 20mm thick of above 0.40 Sqm granite tile dado of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
16.8
-
2057.8
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
28
-
237.6
BOUNDARY WALL & ENTRANCE GATE
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
164.16
-
205.3
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
20.52
-
675.37
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
13.68
-
4265.1
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
foundation and Column Base
34.2
-
5393.4
Plinth beam
19.2
-
5829.4
Column & Beam
10.69
-
11052.5
Lintel
11.52
-
8982.2
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
71.05
-
7903
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
57.6
-
4151.1
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
134.4
-
4184.4
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
537.6
-
216.1
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
537.6
-
141.2
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and , cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
972.8
-
129.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
1800
-
71.1
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
36
-
187.6
WATCH TOWER
-
-
-
CIVIL & STRUCTURE
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
16.57
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
11.05
-
393.7
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
11.05
-
114
Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.
16.57
-
173.8
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
-
-
-
GROUND FLOOR
23.36
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
6.68
-
4630
Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland Slag Cement(PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
1
-
5986.2
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
GROUND FLOOR
-
-
-
Footing
2.73
-
5393.4
Pedestal & Column
3.08
-
11052.5
Plinth Beam
1.49
-
5829.4
Lintel
0.47
-
8982.2
Chajja, loft, kitchen platform , fins & sill slab
6.21
-
815.7
Staircase
3.63
-
10656.8
Roof/ Floor Beam
1.93
-
11052.5
Roof/ Floor slab
0.66
-
9594.2
FIRST FLOOR
-
-
-
Column
1.92
-
12297.4
Lintel
0.54
-
9713.6
Chajja, loft, kitchen platform , fins & sill slab
7.2
-
909.7
Staircase
3.63
-
11723.2
Roof/ Floor Beam
1.93
-
12297.4
Roof/ Floor slab
0.66
-
10448.1
SECOND FLOOR
-
-
-
Column
1.92
-
13787
Lintel
0.54
-
10686.53
Chajja, loft, kitchen platform , fins & sill slab
7.2
-
1028.6
Staircase
3.63
-
13098.1
Roof/ Floor Beam
5.64
-
13787
Roof/ Floor slab
3.17
-
11567.8
THIRD FLOOR
-
-
-
Column
1.92
-
13841.7
Lintel
0.2
-
10741.2
Chajja, loft, kitchen platform , fins & sill slab
3.51
-
1032.1
Roof/ Floor Beam
5.64
-
13841.7
Roof/ Floor slab
3.17
-
11622.5
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
-
-
-
GROUND FLOOR
26.84
-
7903
FIRST FLOOR
19.63
-
7926.4
SECOND FLOOR
29.56
-
7950.9
THIRD FLOOR
21.56
-
7976.7
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
6.34
-
4151.1
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
7.45
-
4184.4
FIRST FLOOR
7.19
-
4446.2
SECOND FLOOR
7.19
-
4747.4
THIRD FLOOR
8.66
-
5093.7
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
-
-
-
GROUND FLOOR
42.27
-
216.1
FIRST FLOOR
38.08
-
220.9
SECOND FLOOR
38.08
-
225.8
THIRD FLOOR
39.44
-
230.9
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
47.62
-
155.3
FIRST FLOOR
49.72
-
159.1
SECOND FLOOR
41.34
-
163
THIRD FLOOR
13.39
-
167
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
GROUND FLOOR
53.24
-
141.2
FIRST FLOOR
41.34
-
144.4
SECOND FLOOR
41.34
-
147.8
THIRD FLOOR
38.19
-
151
Providing 20mm thick and above 0.40 Each Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
33.49
-
2045.9
FIRST FLOOR
17.91
-
2055.6
SECOND FLOOR
16.56
-
2065.8
THIRD FLOOR
29.07
-
2076.5
Providing 20mm thick of above 0.40 Sqm granite tile dado of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
6.03
-
2057.8
FIRST FLOOR
5.36
-
2072.4
SECOND FLOOR
5.36
-
2086.7
THIRD FLOOR
2.81
-
2101.7
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
-
-
-
GROUND FLOOR
40.1
-
237.6
FIRST FLOOR
38
-
237.6
SECOND FLOOR
38
-
237.6
THIRD FLOOR
29.3
-
237.6
Providing and fixing factory made sing extruded WPC(Wood Polymer Composite) Frame size 60x125 mm solid door/windows/Ceasetory windows & other Frames/Chowkhat comprising or virgin PVC polymer of K value 58-60(suspension Grade), calcium carbonate and nature fibers(wood power/rice husk/wheat husk) and non toxic additives(Maximum toxicity index of 12 for 100gms)fabricated with miter joints after plying PVC solvent cement and crewed with full body threaded star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawal strength of 2200 N (Face) & 11 N (Fdge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of frame Class A category with property of being termite/barer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in Charge(M.5 hold fast/lugs or SS dash fasteners shall be paid for separately).Note: for WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
GROUND FLOOR
5.25
-
1217
THIRD FLOOR
5.25
-
1217
Supplying fitting and fixing in position flush door using 32mm thick BWR Block Board of approved quality of Green / Mayur / Aeon or equivalent with providing 1mm sun mica (Royal touch) both sides of approved quality and as per drawing & design with all necessary brass fittings, door closer (Godrej, heavy duty) motrice lock (Godrej heavy duty), handle, door stopper etc including all required hardware with cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.
-
-
-
GROUND FLOOR
2.21
-
7035.4
THIRD FLOOR
2.21
-
7035.4
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
GROUND FLOOR
291.6
-
71.1
FIRST FLOOR
388.8
-
71.1
SECOND FLOOR
388.8
-
71.1
THIRD FLOOR
291.6
-
71.1
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive paintingncluding cost, conveyance, loading and unloading and , cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
89.89
-
71.8
FIRST FLOOR
87.8
-
73.1
SECOND FLOOR
142.16
-
74.4
THIRD FLOOR
52.82
-
75.8
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
89.89
-
135.3
FIRST FLOOR
87.8
-
138.3
SECOND FLOOR
142.16
-
141.4
THIRD FLOOR
52.82
-
144.6
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and , cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
53.24
-
129.6
FIRST FLOOR
41.34
-
134.6
SECOND FLOOR
41.34
-
139.9
THIRD FLOOR
38.19
-
145.4
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
GROUND FLOOR
9.72
-
187.6
FIRST FLOOR
12.96
-
192.5
SECOND FLOOR
12.96
-
197.6
THIRD FLOOR
9.72
-
202.7
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and , cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
50
-
430
FIRST FLOOR
50
-
430
SECOND FLOOR
50
-
430
THIRD FLOOR
50
-
430
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, , T & P etc. required for the complete in all respect as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
85.07
-
333.7
FIRST FLOOR
85.07
-
333.7
SECOND FLOOR
85.07
-
333.7
THIRD FLOOR
226.94
-
333.7
Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished)
44.52
-
137
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
-
-
-
GROUND FLOOR
9.72
-
6912.15
FIRST FLOOR
12.96
-
6912.15
SECOND FLOOR
12.96
-
6912.15
THIRD FLOOR
9.72
-
6912.15
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, , cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
-
-
-
THIRD FLOOR
47.82
-
390.8
INTERNAL ELECTRICAL WORK
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
2
-
567.23
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
12
-
792
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
1
-
1074
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
-
552.7
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor / Havels / V Guard/KEl )
8
-
670
Supplying and fixing of 4module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15 / 16 amps socket outlet and 15 / 16 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
8
-
629.82
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,6 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor / Havels /KEI )
-
-
-
6 Module (200mmX75mm)
5
-
898.76
Supply, delivery, installation & testing of AC boards consisting of 1 No 20-A DP Modular switch with indicator and 1 No 16A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge.
11
-
907
Supplying and fixing of 100W,step type regulator, 2 Module without base and cover including connection etc as required. (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
12
-
466.52
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
28
Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.
50
-
39
Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
60
-
40
Supplying and fixing of RJ11 telephone jack single with shutter & RJ 45 computer jack with shutter, 2module modular base and cover including connection for telephone and LAN . (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
1
-
441.65
Supplying and fixing T.V. antenna socket outlet piano type ISI marked on the existing switchboard / cover including connections etc as requird.
4
-
100
Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Computer / Circuit or Sub main wiring as required & as per Direction of Engineer-In-Charge.
-
-
-
20 mm dia.
20
-
92
25 mm dia.
10
-
94
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
250
-
125
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
210
-
139
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
190
-
156
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.
160
-
407
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) MAKE:LEGRAND,L&T,HAVELLS)
-
-
-
4 way, Double Door TPN DB
2
-
1614
Supplying and fixing following rating, double pole, (single phase
and neutral), 240 V, residual current circuit breaker (RCCB),
having a sensitivity current 300 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
-
-
-
40 AMP 4POLE MCI
2
-
562
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
24
-
129
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
7
MAIN DISTRIBUTION BOARD
-
-
-
PANEL BOARD:
-
-
-
Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. MAKE-L&T / LEGRAND / C&S)
-
-
-
Main Panel Board:
-
-
-
Incoming:
-
-
-
Incoming: 100 Amp. 4P MCCB 16 KA (Thermal Magnetic Release) - 1No
-
-
-
125 AMP 4WAY MANUAL CHANGOVER SWITCH 1 NO
-
-
-
Equiments:
-
-
-
4 Nos. 80 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code).
-
-
-
1 No. VAF Digital Meter.
-
-
-
3 Nos. RYB LED Indicator.
-
-
-
3 Nos.63 / 5 Amp. C.T. Operated.
-
-
-
Outgoing:
-
-
-
1 Nos of sub Meter connection
-
-
-
2 Nos 40 AMP DP MCB 10 KA
-
-
-
3 Nos.63 Amp. 4P MCB 10 KA.With spreadentinle & cable alloy
1
-
39171
FITTINGS & FIXTURES:
-
-
-
Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. (Make- Philips,Wipro, HAVELLS,BAJAJ)
-
-
-
Supply of Surface mounted indoor type 20 WATT LED TUBE with aluminium housing , OPAL diffuser and Lamp Similar to HAVELLS Cat No. LHEXARP7IN1W020 complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
26
-
588
Supply of 10 WATT LED BOLLARD LIGHT Similar to BAJAJ BGBOM 650 9W LED WW complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
10
-
5230
Supply of 9 WATT LED BULB type Luminaire with LED Similar to complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
6
-
489
Supply of Wall bracket light with 1 N x 4 W A45/Candle LED Filament Lamp holder type Luminaire with LED HAVELLS MAKE LHFOAIC1TZ1I040 Similar to complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
14
-
2367
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
56
-
184
Numbering of ceiling fan/ exhaust fan/ light fittings as required.
86
-
23
Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc good buy dust proof segment or simillar to to complete assembly . including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Engineer-In-Charge.(Make-Khaitian , USHA, HAVELLS,Bajaj)
-
-
-
1200 mm 48 '' Sweep Ceiling Fan 210 CMM Air Delivery.
20
-
3284
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-chargeMake-Khaitian , USHA, HAVELLS,Bajaj)
-
-
-
450 mm Turbo HD EXHAUST FAN 900 RPM.
3
-
5050
230 mm EXHAUST FAN 900 RPM.
6
-
1812
EARTHING:
-
-
-
Providing and fixing 25 mm x 5 mm Copper earth strip in 40 mm dia G.I. pipe surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
501
Extra for using salt and charcoal for G.I or copper plate earth as required and making good the damages caused complete as required and as per direction of Engineer-in-charge
2
-
682
Providing and fixing 8 SWG COPPER wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required and making good the damages caused complete as required and as per direction of Engineer-in-charge
30
-
57
Earthing with COPPER plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
2
-
4859
CABLE
-
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
100
-
121
Supply, Laying and Testing of following Size XLPE insulated 1.1 Kv alluminium armoued cable making good the damages caused as required complete as per Direction of Engineer-In-Charge. (Make: polycab,KEI)
-
-
-
25 mm2 3 1⁄2 Core , Al Armoured , XLPE Cable( FOR PANEL)
100
-
378
Flexible Power Cable : Cu 3 core x 2.5 Sq mm, 11KV Grade, FRLS for power panel to lights at poles
100
-
124
Supply of all materials like cable lugs, gland etc as required & terminal of below mentioned cable complete as per required technical specifications & direction of EIC
-
-
-
25 mm2 3 1⁄2 Core , Al Armoured , XLPE Cable
3
-
310
Supplying of following Materials
-
-
-
First Aid Box.
1
-
750
Shock Treatment Chart (Odia / Hindi & English).
1
-
525
8 mm thick Rubber Mat.
12
-
770
ABS type Fire Extinguisher of 4.5 Kg.
1
-
3800
Danger Board.
1
-
120
JETTY (SUPPORT INFRASTRUCTURE)
-
-
-
Cover Cube Floating Docks (Jetty) (Imported)
Including Side Railing. Material: High density polyethylene (HDPE),Marlex HDPE 50100 / QTR 571
Cube Dimensions : 500mm x 500mm x400m
Higher Holding Strength – corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover Top Cover : Separate cover made of Marlex HDPE 50100 /QTR 571 with 20mm thick and Antiskid design for extra strength, & prevent wear & tear Lug thickness : 22mm (±5%) to ensure sufficient strength
Max Weight of cube with cover 8.5 Kgs/cube (±5%) Buoyancy: 360Kgs/Sq.mtr. Accessories and connectors - Made of same
HDPE material to avoid any frictional damages. HDPE Side railing , Height 1000mm Complete accessories, short pin, short screw
& nuts, cleat, washer, required for
constructing floating surface including rope UA radiation proof Buoyancy test report QB 1557-1992
Diagonal Tensile strength test report GB/T 1040.1-2006
Compressive strength Test :GB/T 8813- 2008
Supply, Installation and handover of project at site
IKCA / ICF Approve
150
-
16500
SOLID WASTE MANAGEMENT
-
-
-
Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.
11.49
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
7.66
-
393.7
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
7.66
-
114
Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.
11.49
-
173.8
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
-
-
-
GROUND FLOOR
23.78
-
675.37
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
2.61
-
4630
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
GROUND FLOOR
-
-
-
Footing
1.53
-
5393.4
Pedestal & Column
0.99
-
11052.5
Plinth Beam
0.9
-
5829.4
Lintel
0.2
-
8982.2
Chajja, loft, kitchen platform , fins & sill slab
1.8
-
815.7
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
-
-
-
GROUND FLOOR
4.61
-
7903
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
3.41
-
4151.1
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
7.04
-
4184.4
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.
-
-
-
GROUND FLOOR
33.02
-
216.1
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
4.4
-
155.3
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
GROUND FLOOR
47.84
-
141.2
Providing 20mm thick of above 0.10 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
9
-
936.3
Providing 20mm thick of above 0.10 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
1.8
-
1049
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
GROUND FLOOR
163.35
-
71.1
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive paintingncluding cost, conveyance, loading and unloading and , cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
37.41
-
71.8
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
37.41
-
135.3
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and , cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
47.84
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
GROUND FLOOR
5.45
-
187.6
Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished)
26.08
-
137
Providing ,fitting and fixing of Iron work wrought and put up in trusses Steel Struss (With M.S. Pipe) with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
-
-
-
GROUND FLOOR
388.8
-
101.54
Providing ,fitting and fixing of plain formed TATA BLUESCOPE standard back coat coloured in standard length at 3000mm with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
-
-
-
GROUND FLOOR
12.96
-
824
Supply, Installation, testing & commissioning of 25 - 50kg Capacity ORCOMIN Machine.
1
-
470000
All Electrical Connection, Panel Board, Cables as per requirement.
1
-
40000
Consumables like Bioculum used as Digester, Sanitreat used for Odour control and Coir / Saw Dust used as Absorber for a period of 1 year from the date of handing over of machine.
1
-
120000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements