Odisha Tourism Development Corporation Limited Tender

Supply, Testing & commissioning of 2 meter Electrode chemical earthing with 58mm G.I galvanized electrode and 25 x 3mm G.I inner strip with 50x 6mm copper connecting terminal with 2 bag of BFC (50Kg) of chemical earthing size of chemical earth bar 2 mtr size of earth feet 3’ x 2’’ x 9’ chemical compound to be used 50K.g. including all cost of materials, labour, transportation, loading, unloading, T & P etc. complete as directed by the Engineer-in-charge.

Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge.

Supply installation testing and commisssioning of out door floor mounting 100 Amp MCCB 1 no with 100 Amp Bus bar 63Amp MCCB 3 nos pannel front operated front access extensible type cubicle panel totally enclosed dust and verminn proof with IP-65 protection with hinged and lockable doors polycarbonate including interconnections tinned copoper crimping lugs bonding to earth for use at 415V 3phase 4 wire 50Hz system and to withstand a fault level of 20KA symmetrical for 1 sec at 415V complete as per specification as required as per dirrection of engineer-in charge.( Make - Hansel or equivalent)

Supply, installation,testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge.

Supply, installation, testing & commissioning of 6 mtr long single arm decorative bracket Cast Iron lamp post heavy in weight (approximately 260 Kgs) with specially designed with Monkey spikes fixed on the light arm, the finish of pole should be Antique, the dia of bottom base plate of the pole should be more than 380mm, two nos logo Tourism Department, Govt. of Odisha & O.T.D.C. ltd Should be cast on the pole Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect.

Supply, installation, testing & commissioning of specially designed 70 W LED luminaries, polycarbonate Diffuser High visual comfort & High quality white light should be fitting on the light arm of the above pole Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect.

Supply, installation, testing & commissioning of 3.75 mtr long single arm decorative bracket Cast Iron lamp post heavy in weight (approximately 160 Kgs) with specially designed with Monkey spikes fixed on the light arm, the finish of pole should be Antique, the dia of bottom base plate of the pole should be more than 380mm, two nos logo Tourism Department, Govt. of Odisha & O.T.D.C. ltd Should be cast on the pole it self with specially designed 40 W LED luminaries, High visual comfort & High quality white light should be fitting on the light arm. Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect.

Supply and installation of 600 mm long 20mm dia M.S/G.I Foundation bolt.Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect.

GI pipe midium class 2" dia for Road Crossing Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect

Supplying and laying of HDPE in foundation trenches including cost, conveyance, loading, unloading and taxes of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Earthwork in excavation of foundation trenches in all kinds of soil beyond 1.50mtr and upto 3.00mtr depth including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Providing, fixing and placing of Tor steel (HYSD) Fe-500 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost