Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,29,970Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OTDC_76706_3Bid Award Id
ViewTender No
BP I/26/2021-22 dt.29.03.2022Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
151.85
-
115.5
Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.
272.16
-
173.8
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
787.76
-
1052.88
Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
191.53
-
5043.7
Providing and lying Cement Concrete of proportion (1:2:4) using 12 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
3.33
-
6424.5
R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.
-
-
-
GROUND FLOOR
-
-
-
Footing
49.7
-
5846.5
Column
23.16
-
11505.6
Plinth Beam
50.92
-
6283.5
Lintel
6.66
-
9436.3
Chajja, loft, kitchen platform , fins & sill slab
16.12
-
845.3
Staircase
18.78
-
11110.9
Roof/ Floor Beam
22.09
-
11505.6
Roof/ Floor slab
30.33
-
12056.1
RCC Wall
6.19
-
12056.1
FIRST FLOOR
-
-
-
Column
3.81
-
12751.5
Lintel
0.1
-
10167.7
Chajja, loft, kitchen platform , fins & sill slab
1.08
-
939.2
Roof/ Floor Beam
2.18
-
12751.5
Roof/ Floor slab
1.72
-
14242.3
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
-
-
-
GROUND FLOOR
262.48
-
9701.9
FIRST FLOOR
12.23
-
9725.6
Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) in foundation Plinth with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.
200.51
-
4640.4
Brick work in superstructure with flyash bricks in cement mortar (1:6) in Superstructure with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.
-
-
-
GROUND FLOOR
260.41
-
4673.7
FIRST FLOOR
24.52
-
4938.6
Brick work in superstructure with flyash bricks in cement mortar (1:4) in Superstructure with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.
12.21
-
4896.9
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
-
-
-
GROUND FLOOR
1045.94
-
227
FIRST FLOOR
43.83
-
231.8
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
GROUND FLOOR
398.19
-
161
FIRST FLOOR
21.81
-
164.9
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
GROUND FLOOR
672
-
149.5
FIRST FLOOR
60.05
-
152.8
Providing vitrified tile flooring using double charged vitrified tiles of premium grade(of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm conforming to IS 13756 of 800mmx800mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
82.73
-
1286.1
Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade (of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent)having thickness of 8mm to 10mm conforming to IS 13756 of 800mmx800mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
4.72
-
1294.2
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
774.68
-
1039.1
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
110.98
-
1138.3
Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
365.46
-
2074.6
Providing 20mm thick of above 0.40 Sqm granite tile dado of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
53.59
-
2082.7
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
497.55
-
237.6
Providing 30cmx30cm / 40cmx40cm size special plain/ printed series ceramic floor tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.
41.37
-
792.8
Providing 30cmx45cm/30cmx60cm size special plain/printed series edge cut ceramic wall tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.
351.44
-
970
Providing and fixing in position WPC frames of size 125mmx50mm to doors fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge
36.6
-
1217
Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge.
15.12
-
6975.9
Supplying fitting and fixing in position 30mm thick WPC door including fixing of fixtures like 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge.
3.15
-
5798.7
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
GROUND FLOOR
1489
-
82.4
FIRST FLOOR
40
-
82.4
Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
1068.37
-
72.3
FIRST FLOOR
65.64
-
73.6
Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
-
-
-
GROUND FLOOR
1068.37
-
136.3
FIRST FLOOR
65.64
-
139.4
Painting to external surface of building with two coats of weather coat of Apex Ultima (7 years waranty) over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
804.56
-
130.7
FIRST FLOOR
60.05
-
135.7
Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
GROUND FLOOR
48.35
-
189.3
FIRST FLOOR
0.68
-
194.2
Painting with two coats of texture paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
170
-
500
Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect.
1269.24
-
334
Supplying, fitting and fixing in position chequred tile of approved make and quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
31.35
-
585
Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished)
817.04
-
137
Providing & fixing factory made uPVC white colour sliding glazed window three track three panels sliding window wiyh fly proof SS wire mesh(two nos.glazed & one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC.
10.13
-
8177.05
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
5.54
-
6912.15
Providing,fitting & fixing factory made u-PVC casement cum fixed panel window having both end single casement panel,middle fixed panels & at top completely fixed ventilator with SS friction hinges(350x19x19)made of big series frame 67x60mm,sash67x80mm,& mullion 67x80mm all having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc. complete as per specification and direction of Engineer-in-charge.
3.24
-
6478.75
Providing, fitting, fixing of 12mm thick frame less TOUGHENED GLASS DOOR SHUTTER as per design drawing and approved specification using 12mm thick toughened glass of approved quality with machine polished edges, including providing and fixing top & bottom pivot & spring and Stainless steel handle of approved make and any other hardwares and fittings required for the work (all product must get approved by the Engineer-in-charge & Architect prior to supplying & fitting ) including moulding, fitting & fixing with cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
3.5
-
11416
Providing and fixing in position False ceiling Calsium Silicate board and aceiling as per the pattern and design made from 12mm tk CalsiumSilicate board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be madeto accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be levelled and free from cracks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval .to accommodate lighting fixtures.Opening in the ceiling are to be tied withperimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat and hardware asper drawing and specification and direction of Engineer-in-charge or consultant.
73.13
-
1216.8
Providing, fitting & fixing of premoulded decorative corner beading of GRC. Having cross sectional dimension 112x80mm and fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc complete in all respect as per direction of Engineer-in-charge.
85.5
-
403.7
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
47.5
-
387.82
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
-
-
-
GROUND FLOOR
279.87
-
310.7
FIRST FLOOR
12.81
-
338.5
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
81.85
-
4655.9
BORE WELL
-
-
-
Sinking of 200mmx 150mm dia Tube well through DTH Rig.
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
0 mtr to 30mtr
60
-
971
30mtr to 150mtr
140
-
859.7
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia GI/P.V.C/MS casing pipes
60
-
2389.5
Cost of 150mm dia P.V.C schedule-80 pipe
140
-
1643.9
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH/Rotary Rig
2
-
7575.4
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
Sanitary sealing upto 5mtrs below ground level.
2
-
333.2
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
40mm UPVC valve
2
-
566.5
Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications
-
-
-
1.0 H.P single phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
2
-
11200
DOL controll pannel
2
-
7700
4.00sqmm cable
120
-
219
32mm dia steel short piece
4
-
152.3
Steel rope with cover
120
-
26.7
Well cap
2
-
152.3
50mm size CI bracket
4
-
91.3
40mm HDPE Pipe
120
-
106.2
Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site.
2
-
2000
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
18
-
15
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
3
-
5695.1
Providing strong, rigid, leveled, and plumbed centering and shuttering to required shape and size , for floors with ply or steel centering materials with all necessary bracing and tiles and supports with leveling centering covered with plastic sheet with provisions necessary holes and pockets for electrical conduits, pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas upto 4.3m height
18
-
416
Providing neat cement punning over plastered/ concrete surface including watering and curing complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. as directed by the Engineer in charge.
115.5
-
32.2
Supplying & Fixing of Manhole cover ( heavy duty ) 450mm x 450mm water tight type including frame cost includes all material,labour, tax,lead tools & plant etc. complete
2
-
2000
Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge
2
-
14128.9
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
175
-
1576.5
Providing and laying of kerb stone of size300x450x100 mm including cost of all materials, conveyance, loading, unloading and taxes of all materials, cost of all labour, sundries, T & P required for the work as per direction of Engineer-in-charge
49
-
250
Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking UNI PAVER pavers of 80MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
940.34
-
1211.9
SITE DEVELOPMENT,LAND SCAPING, BEAUTIFICATION & PROMENADE
-
-
-
PLANTER DEVELOPMENT (BOTH SIDE FROM MAIN GATE TO BUILDING AS IN THE DRAWING)
-
-
-
Supply of good earth for filling of planter box size (3ft X2ftX1ft X386=2316)
500
-
10
Supply of and Planting of IXORA 'RED THAI DWARF’ inthe planter in two rows in a distance of 1.5ft from plant to plant (386 ft X 2 rows) including supply and application of compost, pesitcide etc complete
200
-
60
3TIRE GREEN BELT DEVELOPMENT ALONG THE BOUDARY WALL
-
-
-
Digging of pit (0.6X0.6X0.6M) for all plants
125
-
17.69
Supply, mixing and refefilling of good earth
500
-
12.12
Supply and mixing manure and pesticide complete
75
-
25
Stake of plants with bamboo stump- 6ft including tie of same
125
-
50
Supply and planting of plant Juniperus /Eugenia-4 to 5 ft Height in 18 x18 inch poly bag size
20
-
400
ficus reginald 5 to 6 ft 18 x18 inch poly bag size
35
-
500
Plumeria alba dwarf 5 to 6 ft 18 x18 inch poly bag size
20
-
400
Supply of fox tail plalm (Wodyetia bifurcata) 6 to 8 ft 18 x18 inch poly bag size
20
-
800
Supply of lagerstroemia indica (chena fula) 4 to 5 ft 10 x10 inch poly bag size
20
-
150
Lawn Development
-
-
-
LAWN DEVELOPMENT:-Preparing Lawn with lawn grass (zoysia japonica-carpet grass) obtained from a healthy and properly maintained the lawn (free from weeds and other foreign materials) and laying on the supplied soil medium with garden soil mixture of farmyard manure, river sand and red earth in appropriate ratio to an average depth of 0.15m, in dibbling method at the distance of 3 to 4 inch as per the location, drawings and specifications provided, including material cost of fertilizer, pestcide,lawngrass etc complete . Area-44700 sqft - including three month maintenance
-
-
-
Excavation of existing land upto 0.5 ft
3500
-
4.8
Supply of good earth
5000
-
10
leveling and dressing , clearing of debrish etc complete
3000
-
1.2
Supply and spreading of sand
2000
-
10
Supply and apply of pesticide contol of termires and othe pests
3000
-
2.2
Supply and laying of zoysia grass /board leaf grass
3000
-
15
Permanent Flower Bed (4.5 X 20 ft 8 N0s) including supply and planting material cost plant(rose/ allmunda/ hibiscus ect flower , fertilizer, pit making and plantation complete.
15
-
2500
Supply and planting of ground cover wedelia/ tradescantia/ zephyranthes lily- 7 ft height in 18 X18 inch poly bag in a pit of 2ft X 2ft X 2ft including material cost plant, fertilizer, pit making and plantation complete.
150
-
40
Supply and fixing of brick (border of planter beds)
3
-
3900
Irrigation though sprinkler system
-
-
-
Supply and fixing of UPVC SH-80 pipes including plumbing , fittings, solvent cement complete with all respect as directed by EIC.
-
-
-
65 mm UPVC SH-80 pipes
12
-
496
50 mm UPVC SH-80 pipes
75
-
384
Supply, fixing and fitting of gear driven pup-up of reputed make HUNTER/Rainbird
5
-
1800
Supply, fixing and fitting of pup-up guard 4 inch SH-80 pipes of reputed make HUNTER/Rainbird
5
-
1048
Supply, fixing and fitting ofscreen filter of 25 mq
1
-
4500
Supply , fixing and fitting of 3hp open well submesible pumpset
1
-
30000
Supply , fixing and fitting of 65 mm gunmetal gate valve 4 nos
1
-
6000
Supply , fixing and fitting of 40 mm air release valve
2
-
1800
Supply , fixing and fitting of valve chamber
2
-
2200
Maintenance for First year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
450
-
10
Weeding through out the year
450
-
5
Mowing Every two months interval
450
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
200
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
175
-
78
Maintenance for Second year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
750
-
10
Weeding through out the year
750
-
5
Mowing Every two months interval
750
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
350
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
350
-
78
FRP
-
-
-
Providing Decorative Ornamental cement plaster like Bamboo/Bullaha/Straw/Plank design as per specification and didection of E.I.C.on structural wall or roof with the plaster is to be made of cement mortar of proportion (1:3) with cement oxide colour or any other approval material including cost,material,conveyance,and labour charges etc.
130.53
-
220
Consideration of R.C.C. Ornaments three trunk sitting chair 5'0'' length standingon cutting there with back rest as Bullhi or Bumboo design made of R.C.C.(1: 11|2: 3 )with adequate reinforce Cemeta finishing the structure with using Cement oxide paint involving all cost conveyance, royalty & texes of all materials compiled.
5
-
15000
Providing fitting and fixing of FRP Butterfly of average height 8 ft made of resin,accelaretator.catalyst,glass,fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
66700
Providing fitting and fixing of FRP Deer Family 3 nos of in average height4 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
33500
Providing fitting and fixing of FRP Elephant Family 2 nos of in average height 10 ft and of 5 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
138000
Providing fitting and fixing of FRP Tiger Family 2 nos of in average height 6 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
31050
Providing fitting and fixing of FRP Tree with Bird in average height 7 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
26450
Providing fitting and fixing of FRP Bear 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
20700
Providing fitting and fixing of FRP Dustbin ( Rabbit ) 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
3
-
6670
Providing 20-30 mm thick fine dressed sand stone flooring ) of approved quality, colour on 12mmm thick cement plaster (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
72
-
1432
Providing 20-30 mm thick fine dressed sand stone dado/skirting , riser of steps of approved quality, colour on 12mmm thick cement plaster (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
10.8
-
1432
Providing edge moulding to 18 mm thick Red Colour Sand stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
72
-
237.6
SIGNAGES
-
-
-
Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 3mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter/DIGITAL PRINTING SYSTEM the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge.
-
-
-
a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage as per specification & direction of Enginner-in-charge
-
-
-
New board -15x6'-0"x4'-0"=
240
-
470
Required stainless stell frame of 80mm NB made out of 304 grade steel pipe including cost, all taxes , transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage
-
-
-
15x35kg
350
-
400
Providing and Fixing white fiber made Selfie point ( I Love KHANDADHAR of 4 feet height ) as per design and specification with artifical tree and seven numbers wild Monkey on it as per the direction of The architect
15
-
8900
JETTY (SUPPORT INFRASTRUCTURE)
-
-
-
Cover Cube Floating Docks (Jetty) (Imported)
Including Side Railing. Material: High density polyethylene (HDPE),Marlex HDPE 50100 / QTR 571
Cube Dimensions : 500mm x 500mm x400m
Higher Holding Strength – corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover Top Cover : Separate cover made of Marlex HDPE 50100 /QTR 571 with 20mm thick and Antiskid design for extra strength, & prevent wear & tear Lug thickness : 22mm (±5%) to ensure sufficient strength
Max Weight of cube with cover 8.5 Kgs/cube (±5%) Buoyancy: 360Kgs/Sq.mtr. Accessories and connectors - Made of same
HDPE material to avoid any frictional damages. HDPE Side railing , Height 1000mm Complete accessories, short pin, short screw
& nuts, cleat, washer, required for
constructing floating surface including rope UA radiation proof Buoyancy test report QB 1557-1992
Diagonal Tensile strength test report GB/T 1040.1-2006
Compressive strength Test :GB/T 8813- 2008
Supply, Installation and handover of project at site
IKCA / ICF Approve
50
-
16500
Providing ,fitting and fixing of Iron work wrought and put up in trusses Steel Struss (With M.S. Pipe) with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
388.8
-
141.6
Providing ,fitting and fixing of plain formed TATA BLUESCOPE standard back coat coloured in standard length at 3000mm with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
12.9
-
929.4
Supply, Installation, testing & commissioning of 25 - 50kg Capacity ORCOMIN Machine.
1
-
470000
All Electrical Connection, Panel Board, Cables as per requirement.
1
-
40000
Consumables like Bioculum used as Digester, Sanitreat used for Odour control and Coir / Saw Dust used as Absorber for a period of 1 year from the date of handing over of machine.
1
-
120000
WATER SUPPLY & SANITARY WORKS
-
-
-
Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92511 (Star White) (Size- 71x38x77cm) type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:4) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.
8
-
16613
Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Pedestal with wash hand basin of Hindware - Star white make having CAT No. 91116 (Pedestal) & CAT No. 91049 (Wash Basin) of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
6
-
12779.7
Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
6
-
882.1
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-COP-057PM of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
24
-
1103.2
Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-CON-041KN of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
13
-
1300
Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 565 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
13
-
1284.7
Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-ACN 1111SM of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
23
-
1452.6
Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.- ACN 1121BN etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
9
-
970.2
Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
9
-
1499.7
Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
22
-
1184.1
Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AHS-1551 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
13
-
1534.4
Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
27
-
144.7
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Piller cock of Jaquar Cat. No.-CQT 23021 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
-
1345.2
Supplying all materials, labour, T&P and fixing standard size of 100mm dia. over head shower of jaquar cat no. -OHS 1759 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
2
-
3014.8
Supplying all materials, labour, T&P and fixing wall mixture jaquar cat no. -CQT 23267 of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
2
-
4262.29
Providing and fixing white glazed urinals 355 x 340 x 535 mm Hindware (Cat no- URS-WHT-13261 Eqv OF Cera/ parryware) including plumbing connections with CPVC pipefrom the water supply line to the urinal complete and concealed C.I. brackets, C.P. flush pipe, 15 mm Dia. 1no C.P. spreaders, 1 Nos. C.P. waste coupling with 1 Nos.waste pipe , 1 No PVC P/S Trap with stainless steel grating in floor. Jointing, making good the damages caused to walls & floors, painting the brackets etc. Necessary pipes between urinal & main supply line to be included in the rates. Range of single urinal basin. cost including all materials, labour,tax, T&P, lead, royality etc.work complete in all respects as per direction of Architect incharge.
5
-
4426.2
Providing and fixing urinal glass partition of Jaquar JSE-CHR-110us 450x of sizeH-9Ocm & width 45cm including cost of all labour T&P etc complete as per direction of Engineer -in- charge.
5
-
4745.76
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
-
-
-
160mm dia PVC (SWR) pipe class "A" ( with wall thickness of 3.2mm to 3.8mm)
110
-
606.8
110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm)
230
-
320.7
75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm )
60
-
187.5
Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification
180
-
399.5
Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge.
15
-
1946
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of ( AJAY/ ASHIRVAD/ ASTRAL) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
GROUND FLOOR
-
-
-
20 mm nominal outer dia Pipes
220
-
202.3
25 mm nominal outer dia Pipes
270
-
269.1
32 mm nominal outer dia Pipes
60
-
357.7
40 mm nominal outer dia Pipes
105
-
496.8
50 mm nominal outer dia Pipes
50
-
764.8
Cutting grooves in pucca floors and walls for taking GI/PVC /CPVC pipes including making good the damages caused with cost of all material,labour, scafolding, tools, plant, royalty etc. complete in all respects.
200
-
178.3
Supplying & Fixing long body Bib cock of CP brass of Jaquar continetnal cat no- CON-107KN/ lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
9
-
1481.6
Supplying & Fixing Bib cock of CP brass of Jaquar continetnal cat no- CQT-23047/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
7
-
1160.1
Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KB Brick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4) 30cm depth in bottom of chamber with 1/2" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3 & neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
-
-
-
Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension.
3
-
10091.62
Plain manhole inside 1200x900and 900mm deep with cast iron manhole and frame(medium duty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg.
2
-
15644.59
Providing and fixing 40mm dia UPVC valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
8
-
566.5
Providing and fixing 50mm dia UPVC valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
6
-
1086.1
Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
40
-
44.7
Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)
2
-
24390.5
WATER FILTER
-
-
-
Supplying all materials, labour, T&P and fixing SS Sink without Drain board Nirali Elegance Ultra (Jumbo - 860 x 510)mm of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
2
-
14115.1
Supplying all materials, labour, T&P and fixing standard size Sink cock of Jaquar Cat. No.-CON 347KNM of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
2
-
1812.8
Supplying & Fixing long body Bib cock of CP brass of Jaquar continetnal cat no- CON-107KN/ lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
2
-
1481.6
Supplying & Fixing Bib cock of CP brass of Jaquar continetnal cat no- CQT-23047/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
8
-
1160.1
Supplying, fitting & fixing of Hindware water closet (EWC Pan P-18) Mat Code-70002, wash basin (size-46cm x 36cm) with one pair mounting bracket, EWC & cistern complete with fittings and seat cover, one no. hinged rail 76cm & 4 Nos. of grab rails 60cm brass brackets. etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications.
1
-
70648.8
INTERNAL ELECTRICAL WORK
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
22
-
571.01
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
22
-
798.61
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
35
-
1084.24
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.0 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
22
-
404.01
Wiring for light point/ fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
4
-
1194.6
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.0 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
6
-
706.37
Supplying and fixing of 3 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 10 amps socket outlet and 10 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
4
-
478.16
Supplying and fixing of 4 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 20 amps socket outlet and 20 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
8
-
615.01
Supplying and fixing of 6 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 2 nos 5 pin 10 amps socket outlet and 2 nos 10 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
2
-
706.37
Supplying and fixing of metal box of 32A D.P modular switch on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
11
-
565.69
Supplying and fixing of metal box of 25A modular socket on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
11
-
431.35
Supplying and fixing of 100W,step type regulator, 2 Module without base and cover including connection etc as required. (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
12
-
511.25
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
28
Supply and fixing of TV antenna Socket outlet completely providing 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size including PVC bend, saddle, elbow, etc. & other necessary materials & labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
4
-
341.35
Supplying and fixing of RJ11 telephone jack single with shutter & RJ 45 computer jack with shutter, 2module modular base and cover including connection for telephone and LAN . (Make-Roma/Anchor/L&T/ Legrand/ Havells /crabtree)
1
-
341.35
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
265
-
128.04
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
310
-
142.13
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
290
-
166.72
2 Nos. Single Core 6 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 4 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
125
-
190.52
4 nos single core 10 sq. mm copper wire for phase and neutral and 1 nos of single core 4 sq. mm copper wire for earth continuty conductor.
80
-
392.74
Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.
50
-
101.38
Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
60
-
101.84
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way, Double door MAKE:LEGRAND,L&T,HAVELLS)
2
-
1914.38
4 way, Double Door TPN DB
2
-
2178.89
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amp 2pole RCCB
2
-
4074.98
63 amp 4pole RCCB
1
-
5340.28
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
36
-
273.18
Single pole blanking plate in the existing MCB DB
4
-
7
MAIN DISTRIBUTION BOARD (PANEL BOARD):
-
-
-
Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. MAKE-L&T / LEGRAND / C&S/ Havells/) Main Panel Board:
-
-
-
Incoming: 100 amp 4p MCCB 16 KA Thermal Magentic (Make: Legrand)- 1No, 125 AMP CHANGOVER BREAKER(Make: L&T)- 1 N, Equiments: 4 Nos. 150Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code). 1 No. VAF Digital Meter,3 Nos. RYB LED Indicator,3 Nos.63 / 5 Amp. C.T. Operated. Outgoing:1 Nos of sub Meter connection,32 Amp.DP MCB 10 KA (Make: Legrand) With spreadentinle & cable alloy -3NOS, 63 Amp. 4P MCB 10 KA (Make: Legrand) With spreadentinle & cable alloy -3nos, 1P LCD Meter 5-30A with Optical port + BOX-1nos.
1
-
53957
FITTINGS & FIXTURES:
-
-
-
Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. Make- Havells,BAJAJ,wipro,Philips
-
-
-
Supply, Installation,Testing & commissioning of surface and wall mounted 18 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
20
-
724.95
Supply, Installation,Testing & commissioning of surface and wall mounted 10 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
16
-
652.21
Supply, Installation,Testing & commissioning of Wall bracket light with 1 N x 4 W A45/Candle LED Filament Lamp holder type Luminaire of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make : Havells LHFOAIC1TZ1I040 / Bajaj /Phillips/Wipro or Equivalent)
12
-
2586.26
Supply, Installation,Testing & commissioning of 12 watt Recessed mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
4
-
1625.55
Supply, Installation,Testing & commissioning of 18 watt Surface mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
18
-
2523.65
Supply, Installation,Testing & commissioning of Flexible LED strip 5 mtr long with wide viewing angle for good light distribution & IP20 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
4
-
2422.19
Supplying, installation and commissioning of IP65 8 Watt High efficent LED Bollard Light made with Pure polyester UV resistant powder coated die cast aluminium housing withPMMA clear diffuser for uniform illumination with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of Engineer-in-Charge.Make: Havells / BAJAJ / Wipro
10
-
6437.13
Supply, Installation, Testing, and commissioning of decorative ceiling fan 1200 mm sweep 230/240 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. . (Model-SS 390 Havells / Bajaj /Crompton)
16
-
2907.61
Supply, Installation, Testing, and commissioning of decorative Wall fan 400 mm sweep 230/240 volts, 50HZ complete with suitable, clamp, (as per site requirement) and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge(Make-Havells / Bajaj /Crompton or Equivalent)
1
-
3101.21
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge(Make-Havells / Bajaj /Crompton or Equivalent)
-
-
-
250 mm EXHAUST FAN Plastic body
12
-
2194.02
380 mm EXHAUST FAN 1400 RPM.
5
-
5963.12
EARTHING:
-
-
-
Pupplying and laying 8SWG copper wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required
40
-
112.53
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5292.88
CABLE
-
-
-
Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
80
-
402.44
Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
60
-
226.49
Supplying, storing, laying, testing and commissioning of 3c x 4 Sq. mm A2XFY Copper Cable 1100 Volts etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
80
-
242.55
Supplying of following Materials
-
-
-
First Aid Box.
1
-
750
Shock Treatment Chart (Odia / Hindi & English).
1
-
525
8 mm thick Rubber Mat.
12
-
770
ABS type Fire Extinguisher of 4.5 Kg.
1
-
3800
Danger Board.
1
-
250
cctv camea
-
-
-
Supply and Installation of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.). Make- Honeywell/UNV/Hikvision
4
-
9800
Supply and Installation of outdoor Bullet IR Network Camera 1/2.7" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing, ONVIF, POE IEEE 802.3af, (UL, FCC, CE, BIS certified). Make-Panasonic/ Bosch/Honeywell/UNV
2
-
11000
Supply and Installation of 8 CH NVR Support 12MP/8MP / 5MP / 4MP / 3MP / 1080P / 960P IP Adopt standard H.265 high profile compression format, With 4k Video Output, Compression Standard H.265, Network Access Bandwidth 320Mbps, HDD SATA × 8(Upto 10TB Supported), 1- e-SATA And 2-way Audio RCA × 1, Local Output RCA × 1, USB 2.0 × 2 (one in the front panel and the other in the rear panel), USB 3.0 × 1 (rear panel) (UL, FCC, CE, BIS certified).32TB(4TBx4nos) Storage Capacity, Make: Segate/WD Make- Honeywell/UNV/Hikvision
1
-
53000
SITC of Cat6 4-pair 23AWG LSZH UTP Cable in 20 mm conduits/trunking. Make: Tyco-AMP/ Legrand/ Digisol
120
-
82
Supply, installation, testing and commissioning of 43” Ultra HD Display, Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1, 100-240V, 50/60Hz, Interfaces: HDMI-2 or more, DP, Audio, USB 2.0, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC] with internal memory 50 MB or higher, Temperature Sensor, Auto Brightness Sensor, ISM Method, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, os, Smart Energy Saving- 70W or more, Industrial grade Certification- UL / cUL / CB / TUV / KC , FCC / CE / KCC, Warranty-3 years complete as required & as per Direction of Engineer-In-Charge. Make : Samsung/ LG /SONY
1
-
56000
PARKING LIGHTING (12.5 MTR HIGH MAST LIGHT)
-
-
-
Supply delivery installation and testing of 12.5 mtr long semi highmast galvanised lighting mast of thickness 3.1 mm having pole dia 150 mm at top & bottom dia 350mm base plate of 25mm thick having
pole arrangements for fixing of 04 no 25mm dia 750mm long foundation bolt complete resistance to wind speed as per is-875 ,
part-iii , octagonal shape complete assembly containing inner & lantern ring 06 way , 3 way frp Junction box with the bottom single drum winch 03 no.s 4 mm dia steel wires disc 6mm wire single from
compensating disc to winch 1-1/4" dia 750 mm dia foundation bolts etc.as required provision for 06 no.s 200w LED Light luminaries .The mast will have both manual & motorise system to be operated at 3 phase 440 volt with aviation light arrangements & complete as per the site requirements of approved make as per the direction of Engineer-in-Charge. ( jaj/Velmont)
1
-
250000
Supply of raising lowering system comprising double drum winch, 5mm dia meter SS wire rope, trailing cable, connector,integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from junction box to individual luminaire & MCB in base compartment are not included and are a part of installation).of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
65500
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template etc. as required. as per the direction of Engineer-in-Charge..
1
-
7600
Construction of suitable shallow foundation M24 x750 (6 Nos.)with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capasity at site as 10T/sqm. At 2X2 mit. Depth with all materials and labour charges (as per drawing) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
36000
Erection of 12.5 m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
18000
Supplying and erection of LED avition obstruction light Lumainair ( Bajaj 110731) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
4480
Supplying and fixing double door MS feeder piller box with near the high mast towerProviding the following component ( switching acc.) inside the fidder piller including internal wiring all. Complete for autometic , timely OFF/ON for operating of (6 to 8 nos) 200 LED lighgting fitting. i)63 A 4 pole MCB isolater 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no,VIII) 6 AMP SP MCB 6 NOS of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
25000
Supply, Installation,Testing & commissioning of of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 200 watt flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
6
-
22000
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
Providing and fixing 25 mm x 5 mm GI earth strip in 40 mm dia G.I. pipe surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
12
-
458.8
Supplying, storing, laying, testing and commissioning of 4c x 10 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
50
-
269.3
25 KVA DG SET
-
-
-
Supply, installation, testing & commissioning of 25 KVA 3 phase Silent DG set with AMF Panel. The DG set must be latest CPCB approved of etc complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Jakson / Kirloskar/Ashok leyland
1
-
652530
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5285.9
25 KVA SUBSTATION
-
-
-
Construction of 3-ph., 3-wire 11KV line with 9 mtr 300Kg PSC Pole for Pin Point and two nos Cut points with double disc arrangement of 55mm AAAC. (80mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.3
-
316147.39
Supply & fixing of Construction of Double pole Mounted 11/.4KV Sub station using 9mtr. X 300kg long PSC Pole with double disc arrangement for 25KVA Transformer including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
200414.28
Supply & fixing of Construction of 3-phase 50 sqmm AB Cable on 8mtr x 200Kg PSC Pole for LT line (30mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.25
-
588113.08
Supply & fixing of Barbed wire fencing boundary wall including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
17140
Providing metal spreading using 40mm metal including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
10000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements