Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 41,330Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_OTDC_50048_9Bid Award Id
ViewTender No
BP -I/13/2018-19 dt. 29.09.2018Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
22.22
89679
4036
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Ground Floor
-
-
-
... More
a) Column Base
26.12
132613
5077.1
... More
b) ) Column & Beam
6.17
57539
9325.7
... More
First Floor
-
-
-
... More
Column & Beam
3.26
33452
10261.4
... More
Plinth Bend
7.45
40154
5389.8
... More
Roof slab
-
-
-
... More
Ground Floor
17.92
150499
8398.4
... More
First Floor
1.96
17931
9148.6
... More
Lintel
-
-
-
... More
Ground Floor
4.82
38741
8037.7
... More
First Floor
0.05
435
8715.7
... More
Staircase
1
8919
8919.6
... More
Chajja
-
-
-
... More
a) Ground Floor
7.43
5211
701.4
... More
b) First Floor
0.74
578
781.2
... More
Shelf
2.23
1261
565.5
... More
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
-
-
-
... More
Ground Floor
58.46
357149
6109.3
... More
First Floor
7.55
46246
6125.3
... More
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
17.05
66350
3891.5
... More
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
a) Ground Floor
39.1
153459
3924.8
... More
b) First Floor
14.87
61059
4106.2
... More
Providing 16mm thick cement plaster in all floors at all height (inside) with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
-
-
-
... More
a) Ground Floor
272.55
41100
150.8
... More
b) First Floor
69.75
10748
154.1
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to (out side )smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
-
-
-
... More
a) Ground Floor
195.43
20871
106.8
... More
b) First Floor
87.43
9538
109.1
... More
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
a) Ground Floor
145.55
16956
116.5
... More
b) First Floor
16.86
2008
119.1
... More
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
145.9
35468
243.1
... More
Providing vitrified tile flooring using vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series(homogeneous)of approved quality, colour in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.
(Make:-.(For New work work only)
-
-
-
... More
a) First Floor
102.57
91030
887.5
... More
b) Second Floor
1.35
1206
893.9
... More
Providing vitrified tile using vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) in dadoes of approved quality, colour on 12mm thick cement plaster (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.
(Make:-JONSON/NITCO/KAJARIA/ORIENT BELL)
-
-
-
... More
a) Ground Floor
13.94
11529
827.1
... More
b) First Floor
0.45
376
836.7
... More
Providing 30cmx30cm/40cmx40cm special plain/printed series Ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming IS13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25 mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with ordinary Portland slag cement (PSC) grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge. (Make:-JONSON/NITCO/KAJARIA/ORIENT BELL)
8.72
5284
606
... More
Providing 30cmx45cm size special plain/printed series ceramic glazed wall tiles of premium grade having thickness 6.5mm to 6.7mm confoEach Rmting to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.
40.2
26741
665.2
... More
Providing 20mm thick and above 0.40 Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
8.07
16028
1986.2
... More
Supplying, fitting and fixing in position, granite in dados skirting and risers of 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted with neat cement slurry and jointed with neat cement slurry mixed with required shade of pigments to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
4.36
8547
1960.4
... More
Supplying, fitting and fixing well dressed and well seasoned sal wood choukaths of different length and 6.35cm. x 12.70cm. sizes in all floors in proper position including two coats of coaltaring to wall and lintel side faces of choukaths including cost of coaltar and labour for coaltaring and fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws including cost, conveyance, loading, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge
0.19
8881
46745.8
... More
Supplying fitting and fixing in position flush door using 32mm thick BWR Block Board of approved quality of Green / Mayur / Aeon or equivalent with providing 1mm sun mica (Royal touch) both sides of approved quality and as per drawing & design with all necessary brass fittings, door closer (Godrej, heavy duty) motrice lock (Godrej heavy duty), handle, door stopper etc including all required hardware with cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.
12.36
67830
5487.9
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
602
38214
63.48
... More
Supplying, fitting, fixing up two tracks Aluminium sliding window with domal (27 Euro series) of make alum or equivalent with outer and shutter section of 1 .5 mm thick with powder coating including double bearing runner, felt ,concealed rock , joining angle , screw, fasterners and other required hardware complete in all respect as per the drawing and design and as per direction of Engineer-in charge.( The product must be get approved by the EIC before installation)
172
90914
528.57
... More
Providing fitting and fixing of 5mm thick plain glass to the above mentioned window including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer-in-charge.
15.98
11216
701.9
... More
Providing & fixing factory made (Make :-Rajshri) internal PVC door frame of size 100mmx45mm with wall thickness of 5mm made out of extruded 5mm PVC foam sheet , meter cut at two corner & joined with two numbers 150mm long bracket of 15mmx15mm squire tube. The two vertical door profile are to be reinforced with 40mm x20mm tube of 19 gauge throughout the frame. etc. complete as per specification and direction of Engineer-in-charge.
10.67
5825
546
... More
SProviding and fixing 30mm thick “Rajshri”BRAND FACTORY MADE SINGLE SIDE PANEL PVC DOOR SHUTTER consisting of frame made from M.S. tubes of 19 gauge thickness, size 19x19mm forstyiles and 15x15mm for top and bottom rails. The M.S frame shall have a coat of steel primers . The M.S frame shall have covered with heat moulded Rajshri single side prelam PVC “C” channel of 5mm thick sheet and 30x50mm wide to formstyiles and 5mm thick and 75mm wide single side prelam sheet for top rail, lock rail and bottom rail on other side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, paneling of 5mm etc. complete as per specification and direction of Engineer –in-charge.
3.25
10400
3200.1
... More
Painting three coats (IS – 2395), two coats with Plastic emulsion paint with putty and primer of approved shade & make over base coat of primer including cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger/Asian/JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge.
-
-
-
... More
a) Ground Floor
365.65
58284
159.4
... More
b) First Floor
53.65
8659
161.4
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.
-
-
-
... More
a) Ground Floor
241.16
23054
95.6
... More
b) First Floor
116.68
11721
100.46
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on wood work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
6.9
930
134.9
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on Iron work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
15.98
2104
131.7
... More
Providing and fixing circular type stainless steel 125mm dia jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the engineer in charge
34.08
11082
325.2
... More
Toilet
-
-
-
... More
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
49.21
7283
148
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
49.21
4045
82.2
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
53.97
31993
592.8
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
5.35
21592
4036
... More
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
4.86
21473
4418.4
... More
Providing and applying of post construction Antitermite treatment by drilling 12mm dia mtr holes as a distance of 30 cm @ junction of wall and floor about 330 mtr apart depth enough to reach the soil below and chemical emulsion ( PREMISE, IMIDACHLOPRIED 30.5 SC OF BAYER MAKE fixed with 475 ltr water ) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specificationm and the holes should be pluged with filling materials as per direction of Engineer-in- charge.
32.41
3847
118.7
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Ground Floor
-
-
-
... More
a) Plinth Beam
2.55
13743
5389.8
... More
b) Roof beam
2.28
21262
9325.7
... More
c) Roof Slab
3.49
29310
8398.4
... More
d) Slope Roof
2.39
21623
9047.3
... More
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
27.94
108728
3891.5
... More
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
20.1
78888
3924.8
... More
Providing 16mm thick cement plaster in all floors at all height (inside) with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
124.74
18810
150.8
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to (out side )smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
82.48
8808
106.8
... More
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
135.38
15771
116.5
... More
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
32.48
7895
243.1
... More
Painting three coats (IS – 2395), two coats with Plastic emulsion paint with putty and primer of approved shade & make over base coat of primer including cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger/Asian/JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge.
260
41444
159.4
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.
82.48
7885
95.6
... More
Providing 30cmx30cm/40cmx40cm special plain/printed series Ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming IS13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25 mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with ordinary Portland slag cement (PSC) grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge. (Make:-JONSON/NITCO/KAJARIA/ORIENT BELL)
20.88
12653
606
... More
Providing 30cmx45cm size special plain/printed series ceramic glazed wall tiles of premium grade having thickness 6.5mm to 6.7mm confoEach Rmting to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.
81.54
54240
665.2
... More
Providing 20mm thick and above 0.40 Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
10.8
21450
1986.2
... More
Supplying, fitting and fixing in position, granite in dados skirting and risers of 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted with neat cement slurry and jointed with neat cement slurry mixed with required shade of pigments to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
1.35
2646
1960.4
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
196.1
12448
63.48
... More
Providing & fixing factory made (Make :-Rajshri) internal PVC door frame of size 100mmx45mm with wall thickness of 5mm made out of extruded 5mm PVC foam sheet , meter cut at two corner & joined with two numbers 150mm long bracket of 15mmx15mm squire tube. The two vertical door profile are to be reinforced with 40mm x20mm tube of 19 gauge throughout the frame. etc. complete as per specification and direction of Engineer-in-charge.
21.2
11575
546
... More
SProviding and fixing 30mm thick “Rajshri”BRAND FACTORY MADE SINGLE SIDE PANEL PVC DOOR SHUTTER consisting of frame made from M.S. tubes of 19 gauge thickness, size 19x19mm forstyiles and 15x15mm for top and bottom rails. The M.S frame shall have a coat of steel primers . The M.S frame shall have covered with heat moulded Rajshri single side prelam PVC “C” channel of 5mm thick sheet and 30x50mm wide to formstyiles and 5mm thick and 75mm wide single side prelam sheet for top rail, lock rail and bottom rail on other side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, paneling of 5mm etc. complete as per specification and direction of Engineer –in-charge.
5.38
17216
3200.1
... More
Supplying, fitting, fixing up two tracks Aluminium sliding window with domal (27 Euro series) of make alum or equivalent with outer and shutter section of 1 .5 mm thick with powder coating including double bearing runner, felt ,concealed rock , joining angle , screw, fasterners and other required hardware complete in all respect as per the drawing and design and as per direction of Engineer-in charge.( The product must be get approved by the EIC before installation)
28.8
15222
528.57
... More
Providing fitting and fixing of 5mm thick plain glass to the above mentioned window including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer-in-charge.
2.88
2021
701.9
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on Iron work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
5.85
789
134.9
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, T & P etc. required for the complete in all respect as directed by the Engineer-in-charge.
38
12357
325.2
... More
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
11.68
71356
6109.3
... More
Supplying and laying of M30 grade heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking TUFF STONE brand pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling, laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-charge.
150
150915
1006.1
... More
Compound Wall
-
-
-
... More
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
47.93
7093
148
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
47.93
3939
82.2
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
40.05
23741
592.8
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
4.73
19090
4036
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Ground Floor
-
-
-
... More
a) Column Base
7.56
38382
5077.1
... More
b) ) Column upto Grade Beam
1.64
8326
5077.1
... More
c) Grade Beam
4.38
23607
5389.8
... More
d) Column
2.81
26205
9325.7
... More
Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.
18.6
113632
6109.3
... More
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
20.25
78802
3891.5
... More
Providing 16mm thick cement plaster in all floors at all height (inside) with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
102.5
15457
150.8
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to (out side )smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
90
9612
106.8
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.
200
19120
95.6
... More
PH Works
-
-
-
... More
Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of hindware make having cat no-92055 of make cornice or equivalent type of approved make including all fittings with supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.
8
69001
8625.2
... More
Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash basin of size 63x50 cm of Hindware make having cat no 10079 or equivalent type of approved make with 32mm dia waste pipe with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
8
41211
5151.4
... More
Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
8
5384
673.1
... More
Supplying all materials, labour, T&P and fixing standard sized Bib cock of Jaquar Kubix Cat. No.-KUB-35037 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
12758
1594.8
... More
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Kubix Cat. No.-KUB-35053 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
30
114174
3805.8
... More
Supplying all materials, labour, T&P and fixing standard sized 15mm dia wall mixture of Jaquar Kubix Cat. No.-KUB-35083 and ALD 083 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
4
15223
3805.8
... More
Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Kubix Cat. No.-AKP-35731 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
7729
966.2
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Kubix Cat. No.-AKP-35711 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
17599
2199.9
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Kubix Cat. No.-AKP-35721 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
12880
1610
... More
Providing and fixing C.P. Glass shelf 600mm long of Jaquar Kubix Cat. No.-AKP-35771 or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
14780
1847.6
... More
Supplying all materials, labour, T&P and fixing of 120mm dia CP overhead shower of Jaquar Kubix Cat. No.-OHS-1789 with arm SHA-483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
4
11938
2984.5
... More
Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Kubix Cat. No.-KUB-35001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
13912
1739
... More
Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size 915x510mm of NIRALI (Elegance Ultra) or equivalent type of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge
1
7773
7773.6
... More
Supplying all materials, labour, T&P and fixing standard sized sink cock of Jaquar Kubix Cat. No.-KUB-35021 or equivalent type of approved make of Hindware / Parryware make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
1
1492
1492.9
... More
Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
8
541
67.7
... More
Supplying all materials, labour, T&P and fixing standard sized grab bar of Jaquar Kubix Cat. No.-AKP-35701 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
13814
1726.8
... More
Supplying all materials, labour, T&P and fixing standard sized toilet paper holder of Jaquar Kubix Cat. No.-AKP-35741 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
8348
1043.6
... More
Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.
-
-
-
... More
15 mm dia
40
5124
128.1
... More
20 mm dia
24
3616
150.7
... More
25 mm dia
20
3830
191.5
... More
32 mm dia
10
2454
245.4
... More
40mm dia
15
5085
339
... More
Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge.
-
-
-
... More
75mm dia
70
10157
145.1
... More
110mm dia
50
13815
276.3
... More
Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.
-
-
-
... More
110mm dia Single Junction with door
5
949
189.9
... More
110mm dia Double Junction with door
1
240
240.8
... More
110mm dia Cowl
4
109
27.4
... More
110mm dia Plain Bend
9
777
86.4
... More
110mm dia SWR Door Bend
4
450
112.6
... More
125mm x 110mm Gulley Trap
4
1646
411.6
... More
75mm dia Plain Bend
6
316
52.7
... More
Supplying all materials, labour, T&P, fitting & fixing of different size brass / GM Full way Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge.
-
-
-
... More
25mm Dia
2
1333
666.6
... More
32mm Dia
2
1995
997.6
... More
40mm Dia
2
2599
1299.6
... More
Providing and fixing square mouth S.W gully trap, brick masonry chamber of size 250mmx250mm with CI cover complete as per approved specification and direction of the Engineer in charge
5
7182
1436.4
... More
Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M20 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge
3
27056
9018.9
... More
Borewell
-
-
-
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
1
2895
2895
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).
100
62250
622.5
... More
Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
50
56420
1128.4
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
50
6195
123.9
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
264
264.9
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
1
4441
4441.3
... More
Supply, installation, testing and commisioning of 1.5 hp vertical submerssible pump set of approved make having discharge 20m3 per hour and 50mtr head including installation of pump set with wire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell)
1
18800
18800
... More
3 core 6.0sqmm copper flat cable
60
21000
350
... More
Electrical Works.
-
-
-
... More
Recessed Wiring to light/Fan/Exhaust Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
-
-
-
... More
Group -A controlled by 6A 1-Way Switch.
20
10694
534.7
... More
Group -B controlled by 6A 1-Way Switch.
22
15331
696.9
... More
Group -C controlled by 6A 1-Way Switch.
26
23493
903.6
... More
Recessed Wiring to Call bell point in 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .bell push Modular type switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
6
4425
737.55
... More
Supply and fixing of 6A modular switch & socket outlet complete with 2 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 2 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
6
4284
714
... More
Supply and fixing of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
12
5547
462.25
... More
Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard/RR )
12
7652
637.7
... More
Supply and fixing of 16A modular switch & socket outlet complete with 1 no of 240 volt 16 amp 5 pin universal round/flat pin combined shuttered socket outlet & 240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required. as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
2
1226
613.2
... More
Supplying and fixing of metal box of 32A D.P modular switch on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
12
6270
522.55
... More
Supplying and fixing of metal box of 20A modular socket on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
12
4574
381.2
... More
Supply and fixing of TV antenna Socket outlet completely providing 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size including PVC bend, saddle, elbow, etc. & other necessary materials & labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
6
1879
313.25
... More
Circuit or Sub-main wiring in 20/25/32mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
-
-
-
... More
(2 x 1.5 + 1 x 1.0) sq.mm copper wire
140
14987
107.05
... More
(2 x 2.5 + 1 x 1.5) sq.mm copper wire
250
31075
124.3
... More
(2 x 4 + 1 x 2.5) sq.mm copper wire
150
21870
145.8
... More
(2 x 6 + 1 x 2.5) sq.mm copper wire
50
9175
183.5
... More
(4 x 10+1x4.0 ) sq.mm copper wire
50
21467
429.35
... More
Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
18
2304
128
... More
Supply & fixing of 4 way (4+12) Tripil pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
1
2322
2322.6
... More
Supply & fixing of 12 way, double pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
1
2030
2030.9
... More
Supply and fixing of 40 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
1
1060
1060.9
... More
Supply and fixing of 63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
1
2073
2073.85
... More
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
1
5320
5320.4
... More
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge.
12
1020
85
... More
Supplying, storing, laying, testing and commissioning of 3.5c x 25 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havels / V Guard/RR/KEI )
20
7337
366.85
... More
Supply, Installation, Testing, and commissioning of ventilating Exhaust fan 2000mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Havells Ventile Air/Bajaj/Crompton or Equivalent)
6
13545
2257.65
... More
Supply, Installation, Testing, and commissioning of decorative ceiling fan 1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Model-SS 390 Havells / Bajaj /Crompton or Equivalent)
2
5890
2945.1
... More
Supply and fixing of capacitor switching circuit,works at 120 to 280 volts,Heavy duty, Noiseless 100W step type Fan regulator complete with all other necessary materials & labour.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
12
5632
469.35
... More
Supply, Installation,Testing & commissioning of Surface mounting 18 W LED tube light fitting including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells Model-E - Lite LED/ Bajaj /Phillips/Wipro or Equivalent)
12
9907
825.65
... More
Supply, Installation,Testing & commissioning of Surface mounting 9 W LED tube light fitting including luminairs of approved make complete with all materials & labour.(Make : Havells Model-E - Lite LED or Equivalent)
8
5473
684.15
... More
Supply, Installation,Testing & commissioning of Surface mounting 10 W LED bulb fitting of approved make complete with all materials & labour.(Make : Havells / Bajaj /Phillips or Equivalent )
6
2850
475
... More
Supply and installation of LED street Light of 48 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries
1
7594
7594.15
... More
Supply installation ,Testing & Commissioning of 63 Amp ICDP Main switch of approved make complete with all materials & labour.
1
5388
5388.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements