Odisha Tourism Development Corporation Limited Tender

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade including centering & shuttering as per approved designs and drawings having a minimum compressive strength (in work test) 20 N / mm2. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceed 25 % ) to be mixed in concrete mixture including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of Tor steel and binding wires and labour charges for straightening, cutting, bending binding etc. of tor steel tying the grills and placing in proper position.

Ground Floor

Foundation

Plinth Beam

Beam and Column

1st floor

Beam and Column

Roof Slab (First Floor) Double staging

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. (2nd floor)

Providing, fixing and placing of Tor steel (HYSD) Fe-500 of SAIL/ TATA/RINL/JINDAL/SHYAM STEEL for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge (Ground floor )

1st floor

Providing 20mm thick decorative cement plaster in all floors at all height with cement mortar of mix (1:4) (Outside) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.

Providing Plain sand stone wall cladding ( 1½" thick , 1' 0"x1' 0" size) with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing rounding of corners with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.

Providing Minor Architectural work stone cladding ( Flower , tree , square , rombous , triangle etc. ) with cement mortar of mix (1:6)with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing rounding of corners with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.

Supplying all labour, T&P for the Carriage of filling earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.

Providing and painting two coats with synthetic enamel paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade confirming to ISI on iron work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all height with cost, conveyance, loading, unloading and taxes of all materials, cost of all labour, sundries, T& P scaffolding of all materials, cost of all labour, sundries, T & P scaffolding etc. required for the work and complete in all respect as directed by the Engineer-in-charge.

Supplying & fitting fixing of Sand stone statues to be fixed in RCC gate ( at all heights ) including cost of Sand stone , all labour cost for making the statue , fixing at proper position including cost of transportation , royality etc. Complete in all respect as per the direction of the E.I.C .

Statue of Pancha Sakha ( 3' 0" x 1' 6" x 9" thick )

Statue of Ganesh / Saraswati / Lakhmi / Radha- Krishna etc. Traditional statues ( 3' 0" x 1' 6" x 9" thick )

Odishi statues (2' 0 " x 1' 0" x 6 " )

ODIYA / ENGLISH LETTERS ( 1' 0" X 1 ' 0" X 3" )

Lion ( 2' 0" L x 2 ' 6 " ht x 1' 0" thickness )

Kalashi ( Jar ) ( 2' 6 " x 1' 6" x 3' 0" )

Nila chakra (3' dia ) 6" thick with 5' x 1' 3" x 10" stand

Nila chakra (3' dia ) 6" thick with 5' x 1' 3" x 10" stand