Odisha Tourism Development Corporation Limited Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,00,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_OTDC_111125_1Bid Award Id
ViewTender No
BP I/14/2024-25 Dt.14.02.2025Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Brick work with K.B. bricks 23cm x 11cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in Superstructure.
9
-
-
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
43.9
-
-
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
7.9
-
-
... More
Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland Slag Cement(PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
19.7
-
-
... More
Providing and fixing Wooden finish vitrified tile flooring using vitrified tiles of premium grade(of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
132.6
-
-
... More
Supplying, fitting and fixing of vitrified tiles in skirting of premium grade (of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent)having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
139.6
-
-
... More
Providing 30cmx30cm size special plain/ printed series ceramic floor tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.
23.6
-
-
... More
Supplying and laying 18 mm thk machine cut & machine polished Granite door frame on toilet area a prefinished surface with 1:3 cement sand mortar. Rate shall be inclusive of machine polishing edges and four side edge chamfering in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area .
43.7
-
-
... More
Supplying and laying 18 mm thk machine cut & machine polished Granite sill and Dado , on door and window a prefinished surface with 1:3 cement sand mortar. Rate shall be inclusive of machine polishing edges in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area .
2.9
-
-
... More
Providing & fixing 550mm deep Wash basin counter made out ofMS Frame with 10mm thik V Board and 18mm thk black granite .
7.2
-
-
... More
Providing 30cmx45cm/30cmx60cm size special plain/printed series edge cut ceramic wall tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.
144.1
-
-
... More
Providing 30cmx30cm size special plain/ printed series ceramic floor tiles of premium grade of approved make ( Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.
34.2
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
38.9
-
-
... More
Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, with application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water in ratio of 1:475, as per detailed specifications given in Indian Railways Standard Specifications, so as to create a chemical barrier below and around the structure by an approved agency. (Plinth Area/Basement floor area shall be considered for Payment)
226.5
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
55.5
-
-
... More
Providing wood work frames (55mmX110mm) of door window clearstory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia &length. Teakwood Chokhat finish with melamine polish
10
-
-
... More
Providing & fixing 30mm thk flush door with 1 1/2" X 1/4" lipping patti on all sides, 4mm thk veneer on both sides and finished in 2 coats Melamine Polishing of approved shade as per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges )
19.1
-
-
... More
Providing & fixing 30mm thk flush door with 1 1/2" X 1/4" lipping patti on one sides, 4mm thk veneer finished in 2 coats Melamine Polishing on other sides 1mm thick laminate finished of approved shade and of approved shade as per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges )
14.7
-
-
... More
Providing and fixing factory made UPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
3.7
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
10.7
-
-
... More
Providing & fixing pelmet 6" x 6" in 19mm commercial ply finished with white enamel paint as per instructions by Architect , the edge of 19 mm ply to be finished with lipping patti 3/4"x1/4" finished with matching polish with 3 coats of melamine. Note : (i) All ply to be sprayed with anti termite & anti borere spray (ii) Rates to include all necessary supports & as per details.
9.5
-
-
... More
Providing & fixing wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 8 mm Thk V board fixing and 8mm SDMR Board fixing on V board with 4mm thk veneer fixing and finished in 2 coats of Melemine Polishing of approved shade as per drawing and architecs instructions. complete
37.6
-
-
... More
Providing and fixing bed backdrobe wall. Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall.This framing would be covered by 10mm thk. V board and 8mm thick V-board with grove fixing with necessary screws and finished with texture paint. as per direction of Engineer-In- Charge. shall be provided wherever required.
122.5
-
-
... More
Providing and fixing in King Size Bed. (2030X1850x325) in Deluxe room etc. complete in all respects as per as per direction of Engineer-In- Charge. .(make-Green/Mayur/Century/Sylven)
11
-
-
... More
Providing and fixing in Bed Side Table.(400x450x400) side table in Deluxe room etc. complete in all respects as per direction of Engineer-In- Charge. .(make-Green/Mayur/Century/Sylven)
22
-
-
... More
Providing and fixing in position wardrobe(825X550X2100) 600mm deep with shutters out of 18 mm thk. BWP ply & shelves out of 18mm BWP ply at appropriate locations with necessary support buttons. The storage to be finished externally with 4 mm thk veener of approved shade & internaly finished in0.8mm laminate with SS hinges, tower bolts, ballcatches lock, Handle (8" SS handle) etc. complete in all respects as per direction of Engineer-In- Charge.(make-Green/Mayur/Century/Sylven)
11
-
-
... More
Providing and fixing in LCD wall panal (1650X125X1950) out of 18mm thk BWP ply with 4mm thk veener and tek wood moulding finish with polish complete in all respects as per direction of Engineer-In- Charge.
11
-
-
... More
Providing and fixing in writing table out of 18mm thk BWP ply with 4mm thk veener and tek wood moulding finish with polish complete in all respects as per direction of Engineer-In- Charge. (make-Green/Mayur/Century/Sylven)
11
-
-
... More
Providing and fixing in study chair out of wooden base frame chair with seat and back fully upholstery. complete in all respects as per direction of Engineer-In- Charge.
11
-
-
... More
Providing and fixing in luggage rack(900x550x650) out of 18mm thk BWP ply with 4mm thk veener finish with polish complete in all respects as per direction of Engineer-In- Charge. (make-Green/Mayur/Century)
11
-
-
... More
Providing and fixing in washbasin vanity cabinat(900X520X700) out of 18mm thk WPC ply with 1mm thk high gloss laminate finish complete in all respects as per direction of Engineer-In- Charge.
11
-
-
... More
Providing and fixing Mirror (600x1550) of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers.
11
-
-
... More
Providing and fixing of mini bar(900X550X1150) 19mm BWP ply all sides and one drawer and lower in door finished 1mm thick laminate inside and outside 4mm thick veneer with finished in melemine polish and top & 3 sides finished in 18mm thick granite with polishing and moulding, chipping etc. with necessary fitting of hinges, drawer channel etc.. as per specification and direction of Engineer-in-Charge.
11
-
-
... More
Outdoor Chair etc complete in all respects as per direction of Engineer-In- Charge.
22
-
-
... More
Outdoor Table etc complete in all respects as per direction of Engineer-In- Charge.
11
-
-
... More
Providing, fitting & fixing Curtains : Supplying of Curtain Fabrics Model & Quality including stitching & installation at site with the Fabric as per approved quality / shade / design including Ringlet type of stitching with best quality. all complete, including all cost of labour,material, conveyance, T&P etc.as per direction of Engineer-in-charge.
11
-
-
... More
Supply and install high quality cloth sheer height upto 270 cm, the price includes supplying and installing tiebacks of the same type of the sheer' according to specification and engineer instructions.
11
-
-
... More
A&F Rod Decor AluminIum Curtain Track Kit (White)
11
-
-
... More
Providing and laying high quality rugs used for interior decorative of approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Door mats ( Heavy quality size 100 cm x 50 cm )
11
-
-
... More
Providing and laying high quality cusions used for interior decorative of approved design as per direction of Engineer-In- Charge.
22
-
-
... More
Providing and laying high quality cusions cover used for interior decorative of approved design as per direction of Engineer-In- Charge.
22
-
-
... More
TableAMP- Model: Wall mounted Chrome approved design as per direction of Engineer-In- Charge.
22
-
-
... More
TableAMP- Model: Wall mounted Chrome approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Squire wall mounter paper towel holder.
11
-
-
... More
Providing supplying pen stand as per approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Providing supplying Wooden tray with handle as per approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Providing supplying flower vase as per approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Providing supplying King Size Bed MATTRESS (72" x 78" x 8" ) with bed linen as per approved design as per direction of architects.etc complete in all respects as per direction of Engineer-In- Charge. .(Make Kurlon/Sleep well)
11
-
-
... More
Providing supplying white colour pillow cover as per approved design as per direction of Engineer-In- Charge. (Make Kurlon/Sleep well)
22
-
-
... More
Providing supplying Bed sheet for King bed (white colour and size 274 cm x 215 cm) as per approved design as per direction of Engineer-In- Charge.(Make: Protico/Bombay deying)
11
-
-
... More
Providing supplying Wooden hanger royalty free vector image as per approved design as per direction of Engineer-In- Charge.
44
-
-
... More
Providing & supplying of Wall Paintings/artifects as per approved design as per direction of Engineer-In- Charge.
11
-
-
... More
Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.(Gypsum Board)
180.4
-
-
... More
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge.
15.2
-
-
... More
Providing and fixing in position Gypsum Board coves to provide floating effect and provision for indirect lighting between two layers of gypsum False Ceiling as per manufacturer's specifications and instructions with 12.5 mm thick `Gypboard' Screw-fixed to oneside Of suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer's instructions and as per specifications using Original Co. Specified Framework Sections G.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws. The `Gypboard ' to be used should be 12.5mm thick tapered edge boards. The boards should Be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional Intermediate channels should be fixed to strap hangers for additional support to prevent strap hangers from buckling/swaying at every 1200 mm. and width ranging from 6" to 12" to be considered 12" only for calculation purpose.
216.6
-
-
... More
Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls and columns to bring the surface in plumb line and level. Item to be completed in all respects including scrappingof existing neeru surface, cleaning etc. as per instructions.
337.2
-
-
... More
Providing and applying desired paint plastic Emulsion finish to ceiling, of approved shade.. The surface of ceiling to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint.
207.5
-
-
... More
Providing and applying desired paint luster finish to walls, of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint.
337.2
-
-
... More
Providing and fixing first quality wall hung European Water closet with PP soft close seat cover of including matching concealed flushing system, connection pipe and chair bracket.All complete as per design and specifications. [Wall hung WC Jaquar model No. CNS-WHT-959SPP] & [Single piece consealed flushing cistern Jaquar model No. CS-WHT-2400]
11
-
-
... More
Providing and fixing under counter top Wash Basin of oval shape all required to complete the work and make it functional. All complete as per design and specifications. [Jaquar model No. JDS-WHT-25909]
11
-
-
... More
Providing and fixing in position best Indian make Mirror , made out of approx. 5.5 mm.thick float mirror glass fixed with 12 mm. thick Plywood and Brass C. P. screws, Teak wood moulding all around etc., complete.
11
-
-
... More
Providing and fixing CP Brass over Head Shower 120mm dia round shape of approved quality & make and as per the direction of Engineer-in-charge. (Jaquar model No. OHS-CHR-1789)
11
-
-
... More
Providing and fixing CP Brass concealed body for single lever diverter with cover of approved quality & make and as per the direction of Engineer-in-charge. make(Jaquar model No. ALD-CHR-065N, Jaquar model No. OPP-CHR-15065NKPM )
11
-
-
... More
Providing and fixing rods of size 25mm dia of stainless steel body with cover, with shower Curtains including necessary fittings as per direction of Engineer-in-charge.
11
-
-
... More
Supply & fixing of Nahani trap with Stainless Steel jali.
22
-
-
... More
Supply fixing and installation of Concealed stop cocks (to be provided only at the entry point of plumbing lines within the toilets / pantry. [Jaquar model No. AQT-CHR-3057]
55
-
-
... More
Installation, testing and commissioning toilet paper holder including cutting and making good the walls. [Jaquar model No. ACN-CHR-1151N]
11
-
-
... More
Providing and fixing CP Brass OPAL PRIME BATH TUB SPOUT of approved quality & make and as per the direction of Engineer-in-charge. make(Jaquar model No.SPJ-CHR-15429PM)
11
-
-
... More
Installation, testing and commissioning ABS health faucet unit comprising of CP flxible hose, spary, wall flange etc. complete of make (Jaquar model No. ALD-CHR-573)
11
-
-
... More
Providing and fixing in position Brass C. P. towel ring, round With round flange of approved make (Jaquar model No.ACN-1121BN)
11
-
-
... More
Providing and fixing in position Brass C. P. TOWEL RACK 600MM. LONG WITH LOWER HANGERS With Brass C.P.brackets, of approved of make (Jaquar model No. CAN-CHR-1181S).
11
-
-
... More
Providing and fixing CP Brass single lever basin mixer TALL boy with 150mm extension of quality & make(Jaquar model No. OOP-CHR-15005BPM]
11
-
-
... More
Providing and fixing in position Brass C. P. waste coupling 32mm F thread 130mm height of approved make. [Jaquar model No. ALD-705L130]
11
-
-
... More
Providing and fixing in position of 10 litres LGyser of approved quality & make and as per the direction of Engineer-in-charge. [Jaquar/ Havells ].
11
-
-
... More
DOUBLE HOOK in Toilet make(Jaquar model No. CAN-CHR-1161N)
11
-
-
... More
Providing and fixing 32mm size Flexible pipe of approved quality & make as per the direction of Engineer-in-charge.
11
-
-
... More
Providing and fixing in position Upvc of various sized for drainage and Water supply system of toilet and wash including necessary fitting and accessories etc complte as per requirment of site and tsting and commissioning etc complete as per direction of Engineer-In- Charge.
11
-
-
... More
Providing and fixing in position soap dispenser with push button of approved size, fixed with Brass C.P. screws and rawl plugs complete.of approved of make
11
-
-
... More
Providing and fixing in position double soap dispenser liquid with push button of approved size, fixed with Brass C.P. screws and rawl plugs complete.of approved of make
11
-
-
... More
Lobby
-
-
-
... More
Dismantling of Existing wall and floor tile with tile Plaster/ Existing Brick work dismantling/ Room & toilet false ceiling/ Electrical wire with chesing wall & conduit, Switch, Socket and electrical box, lighting, A.C and other fixture/ existing plumbing fitting with dismantling of pipes and fixture/ Door & Window/ Existing all Furniture like Bed, sofa, Table, chairs, storage etc.. and removing of malwa .
2
-
-
... More
Brick work with K.B. bricks 23cm x 11cm x 8cm having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in superstructure.
2.5
-
-
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
15
-
-
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
5.01
-
-
... More
Providing vitrified tile flooring using vitrified tiles of premium grade(of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent) having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx1200mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
41.12
-
-
... More
Supplying, fitting and fixing of wooden finish vitrified tiles in wall of premium grade (of make Kajeria/ Johnson/ Nitco/ OASIS or equivalent)having thickness of 8mm to 10mm conforming to IS 13756 of coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
35.75
-
-
... More
Providing and laying Polish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curingand polishing etc. all complete as specified and as directed by the Engineerin-Charge :
97.15
-
-
... More
Providing and fixing machine cut, mirror polished granite stone work for dado, skirting etc., of approved shade & in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/Sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing etc. all complete as per architectural drawings, and as directed by the Engineer-in-Charge.
150.72
-
-
... More
Providing and fixing 18mm thick and 45mm wide U shaped moulding mirror polished machine cut granite stone of approved nosing with expoxy based adhessive i/c machine polisihing and high gloss finish to the projected edge of nosing complete and as per direction of Engineer- in-Charge
46.69
-
-
... More
Providing & fixing wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 12 mm Thk V board fixing and 6mm Thk V Board fixing on 12 mm V board with 4mm thk veneer fixing and finished in 2 coats of Melamine Polishing of approved shade as per direction of Engineer-In- Charge.
15
-
-
... More
Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, with application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water in ratio of 1:475, as per detailed specifications given in Indian Railways Standard Specifications, so as to create a chemical barrier below and around the structure by an approved agency. (Plinth Area/Basement floor area shall be considered for Payment)
105.88
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
13.9
-
-
... More
Supplying and laying 18 mm thk machine cut & machine polished Granite door frame on toilet area a prefinished surface with 1:3 cement sand mortar. Rate shall be inclusive of machine polishing edges and four side edge chamfering in case of protruding edges & groove if ordered. . Measurement for payment shall be as per laid area .
6.1
-
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), instead with white cement and matching pigment in the item of fixing of vitrifed tiles including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 1200x200 mm
35.75
-
-
... More
Providing & fixing glass door made out of 12mm thick Toughened glass with Top / bottom patch fitting with all necessary hardware as approved by architect (Cost to include cost of Handle, lock, floor spring )
3.47
-
-
... More
Providing and fixing factory made UPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
2.65
-
-
... More
Providing & fixing reception table(6 x2x 2.5) 19mm BWP ply finished in 1mm thick laminate of approved shade with 38 mm thk flat moulding complete as per drawing with one pedestal drawer unit consisiting of 2 drawers & 1 filing drawer all finished in laminate of 0.8mm thickness of approved shade and all internal surfaces in french polish with all necessary hardware such as hinges, locks, S.S. Handle, wire manager etc. complete.
1
-
-
... More
Low Back Chair with Adjustable Back & Seat,Fixed armrest,Gas Lift for Height Adjustment, Nylon Base with Castors. Chair should be upholstered in fabric of approved shade and colour. Make:Geeken
1
-
-
... More
Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.(Gypsum Board)
97.75
-
-
... More
Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls and columns to bring the surface in plumb line and level. Item to be completed in all respects including scrappingof existing neeru surface, cleaning etc. as per instructions.
151.56
-
-
... More
Providing and applying desired paint plastic Emulsion finish to walls, of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint.
173.25
-
-
... More
Textured superfine paint shall be applied after preparing the surface to get the antique finish. The paint shall be applied using texture roller to give a uniform roller texture finish with two coats different colours of acrylic emulsion paint.The texture paint used shall be of spectrum make.
77.47
-
-
... More
Supply & laying polycarbonate sheet 3.0 mm thick or nearest, solid compact type for side cladding Make: Tuflite/Everest/Aerolite/Lotus, fixing as per manufactures specification in required area, shape/length for lighting purpose including fixing by using self-tapping screws/bolts of make Corroshield or equivalent and seal with acrylic sealant, make the roof leak proof as required to suit for existing site conditions.
28
-
-
... More
MISCELLANEOUS WORK.
-
-
-
... More
Room Signage
11
-
-
... More
Display area for brouchures/ Art Effects
2
-
-
... More
Conference Hall
-
-
-
... More
Dismantling of Existing wall and floor tile with tile Plaster/ Existing Brick work dismantling/ restaurant false ceiling/ Electrical wire with chesing wall & conduit, Switch, Socket and electrical box, lighting, and other fixture/ existing Door & Window/ Existing all Furniture etc.. and removing of malwa .
1
-
-
... More
Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. in superstructure.
3
-
-
... More
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
80
-
-
... More
R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.
0.17
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
24.49
-
-
... More
Providing and laying glazed vitrified floor tiles ( Kajaria) mett finish in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3Kg/Sqm including grouting the joints with white cement and matching pigments etc., complete.
55.82
-
-
... More
Providing wood work frames (55mmX110mm) of door window clearstory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia &length. Teakwood Chokhat finish with melamine polish
19.52
-
-
... More
Providing & fixing 30mm thk flush door (Brand - Green Aptima) with 1 1/2" X 1/4" lipping patti on all sides, 4mm thick MDF both Side and finished in 2 coats Deco paint (Brand - Burger) of approved shade as per architecs instructions. complete with all necessary hardware, stoppers. (Cost to include cost of Handle, lock, floor spring / door closure, hinges )
11.86
-
-
... More
Providing and fixing factory made UPVC (Brand -Vista) white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing with 8mm toughened glass frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
16.69
-
-
... More
Providing & fixing of Designer laminate Wall wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 8mm thick bison board with 9 mm Thk BWP Ply Board with 1mm thik laminate (Century) finish of approved shade as per architects instructions. complete
37.27
-
-
... More
Providing & fixing of Fabric Paneling with acostic Board wooden panelling Framing shall consist of Heavy duty Aluminium Box Sections 50mm x 25 mm x @ 600mm c/c Both ways horizontally and vertically on the wall with 9 mm Thk BWP Ply Board with acostic board on ply finishing with febric of approved shade as per architects instructions. complete
42.98
-
-
... More
Providing and fixing in Podium complete in all respects as per direction of Engineer-In- Charge.
1
-
-
... More
Providing and fixing in chair out of wooden base frame chair with seat and back fully upholstery. complete in all respects as per direction of Engineer-In- Charge.
30
-
-
... More
Providing and fixing stage table 40mm thick table top out of 18mm thk BWP ply with 1mm thk laminte finish and MS base finish with powder coated complete in all respects as per direction of Engineer-In- Charge.
1
-
-
... More
Providing and fixing in position Gypsum Board False Ceiling as per manufacturer's specifications and instructions with 12.5 mm thick `Gypboard' Screw-fixed to the underside Of suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer's instructions and as per specifications using Original Co. Specified Framework Sections G.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws. The `Gypboard ' to be used should be 12.5mm thick tapered edge boards. The boards should Be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels openings for light fixtures, A.C. ducts, vertical drops, offsets. etc. Additional Intermediate channels should be fixed to strap hangers for additional support to prevent strap hangers from buckling/swaying at every 1200 mm. Item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs supports for A.C. grills, light fixtures, speakers etc.
55.82
-
-
... More
Providing and fixing in position Gypsum Board coves to provide floating effect and provision for indirect lighting between two layers of gypsum False Ceiling as per manufacturer's specifications and instructions with 12.5 mm thick `Gypboard' Screw-fixed to oneside Of suspended G.I. grid. G.I. grid should be Constructed and suspended from the main ceiling as per manufacturer's instructions and as per specifications using Original Co. Specified Framework Sections G.I.24 gauge The Gypboard should be fixed to G.I. grid with 25 mm long Drawali Screws. The `Gypboard ' to be used should be 12.5mm thick tapered edge boards. The boards should Be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional Intermediate channels should be fixed to strap hangers for additional support to prevent strap hangers from buckling/swaying at every 1200 mm. and width ranging from 6" to 12" to be considered 12" only for calculation purpose.
32
-
-
... More
Providing and applying plaster of paris punning in average 8 to 12 mm thickness on walls and columns to bring the surface in plumb line and level. Item to be completed in all respects including scrappingof existing neeru surface, cleaning etc. as per instructions.
88.8
-
-
... More
Providing and applying desired paint plastic Emulsion finish to walls, of approved shade.. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish.The surface shall be painted with two coats of emulsion paint. (Brand - Burger)
59.82
-
-
... More
EXTERNAL PAINTING (APEX) weather proof exterior emuslion. :Providing and applying the APEX weather proof exterior emulsion(water based 100% acrylic) or approved equivalent grade paint to all type of cement plasters, concrete, exterior ceiling etc. or surface / sub straits(which are subjected to continuous seepage and dampness. The surface to be painted shall be made free from any loose paint, dust, grease and any fungus, algae or moss, on it shall got be removed thoroughly by vigorous wire brushing and cleaning with water. Then one coat of exterior grade wall primer be applied after which any surface imperfection such as holes, dents, fine cracks shall be corrected by filling with external wall putty. Thereafter second coat of exterior grade wall primer and again surfaceimperfection to be corrected. Thereafter Apex weatherproof exterior emulsion paint to be applied in two coats. The stock of the quantity for all material as manufacturer’s theoretical consumptio(per unit of actual wall surface area) shall be made available at site before commencement of the painting work. The rate includes cost of all materials, labour, scaffolding, ladders charges, storing&safeguarding the labour in all heights (all external walls, compound walls etc.)
Contractor has to take all risk insurance policy from reputed insurance agency before commencement of work, contractor has to provide all precautions’ and arrange safety belts, helmets to all working labours at
site.
1200
-
-
... More
Providing, fitting & fixing Blinds : Supplying of blinds Model & Quality including stitching & installation at site with the Fabric as per approved quality / shade / design including Ringlet type of stitching with best quality. all complete, including all cost of labour,material, conveyance, T&P etc.as per direction of Engineer-in-charge
13.91
-
-
... More
Providing and fixing in position roller blinds of approved make with acmeda or equivalent fitting, with screen fabric for roller blinds, glass yarn coated with PVC on both sides, basket weave, fire rating classification M1 thickness 0.45 mm, weight 360 gm with openness factor of 10%.
5
-
-
... More
Water proofing
-
-
-
... More
Grinding and cleaning the concrete surface by using mechanical Tools, wire brush, T&P with all safety equipment and necessary arrengements of scaffolding to reach the required height to make the surface clean and free of foreign material and contaminants including water jet cleaning etc. with all leads and lifts as directed by the engineer in charge.
300.4
-
-
... More
Providing and applying Xypex Concrete crystalline based waterproofing coating and durability enhancement by crystallization to be supported by at least two national / international test reports showing clear scaning electron microscopic (SEM) photographs of densified and mature crystals formation to plug all the capillary tracks and pores of the concrete permanently and permiability tested as per IS-2720 conducted by CBRI the concrete should not absorbed water more than 1.5 gms and more than 1mm from the concrete surface. The product to be listed in ICC-ES evaluation report index January 2009, 2010 and 2011. The treatment to be carried out on the cleaned concrete surface as per manufacture's specification/ data sheet. The application to be carried out with brush in one coat @0.80 Kg/ Coat by using all safety equipment and necessary arrengments of scaffolding to reach the required height as directed by the engineer in charge.
300.4
-
-
... More
Electrical works
-
-
-
... More
Recessed Wiring to light/ Fan/ Exhaust Fan/ Call bell point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no 6Amp.1way plate type Modular switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge.
-
-
-
... More
Group -A
22
-
-
... More
Group -B
35
-
-
... More
Group -C
125
-
-
... More
Secondary Point
55
-
-
... More
Recessed Wiring to light/ Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp. 2 way plate type Modular switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge.
25
-
-
... More
Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required.
30
-
-
... More
Supply and fixing of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
48
-
-
... More
Supply and fixing of 6A modular switch & socket outlet complete with 2 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 2 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge.
25
-
-
... More
Supply and fixing of 16A modular switch & socket outlet complete with 1 no of 240 volt 16 amp 5 pin universal round/flat pin combined shuttered socket outlet & 240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required. as per the direction of Engineer-in-Charge.
38
-
-
... More
Supplying and fixing of metal box of 32A D.P modular switch on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
14
-
-
... More
Supplying and fixing of metal box of 20A modular socket on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
14
-
-
... More
Supply and fixing of capacitor switching circuit,works at 120 to 280 volts,Heavy duty, Noiseless 100W step type Fan regulator complete with all other necessary materials & labour.
18
-
-
... More
Supply and fixing of Telephone point on surface or in recess with metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge.
12
-
-
... More
Supply and fixing of TV antenna Socket outlet on surface or in recess with metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge.
12
-
-
... More
Supply and fixing of USB Socket point on surface or in recess with metal box with cover in front including providing and fixing, connection etc as required as per the direction of Engineer-in-Charge.
11
-
-
... More
Sub-main wiring in 20/25/32mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge.
-
-
-
... More
(2 x 1.5 + 1 x 1.5) sq.mm copper wire
120
-
-
... More
(2 x 2.5 + 1 x 1.5) sq.mm copper wire
580
-
-
... More
(2 x 4 + 1 x 2.5) sq.mm copper wire
380
-
-
... More
(2 x 6 + 1 x 2.5) sq.mm copper wire
280
-
-
... More
(4 x 4 + 1 x 2.5) sq.mm copper wire
80
-
-
... More
(4 x 10 + 1 x 4) sq.mm copper wire
80
-
-
... More
(4 x 16 + 1 x 6) sq.mm copper wire
120
-
-
... More
0.5 mm 2 pair telephone wire
350
-
-
... More
RJ-6 Coaxial TV wire
350
-
-
... More
4 pair Cat 6 Lan cable
450
-
-
... More
20 pair Armourd Jelly fill cable
200
-
-
... More
speaker cable Single pair, 2-core, 1.5 sqmm/mcp and hooter wiring
120
-
-
... More
Supply, Installation, Testing, and commissioning of decorative ceiling fan 900/1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
18
-
-
... More
Supply, Installation, Testing, and commissioning of ventilating Plastic Body Exhaust fan 150 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
15
-
-
... More
Supply, Installation, Testing, and commissioning of 300 mm dia Wall Fan of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
10
-
-
... More
Supply, Installation,Testing & commissioning of Surface mounting 18 W LED tube light fitting including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
10
-
-
... More
Supply, Installation,Testing & commissioning of Surface mounting 9 W LED tube light fitting including luminairs of approved make complete with all materials & labour.
10
-
-
... More
Supply, Installation,Testing & commissioning of Recessed mounted 3 watt LED spot luminaries suitable for indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
85
-
-
... More
Supply, Installation,Testing & commissioning of Recessed mounted Celing 9 watt LED luminaries suitable for indoor applications of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
66
-
-
... More
Supply, Installation,Testing & commissioning of Recessed mounted Celing 12 watt LED luminaries suitable for indoor applications of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
32
-
-
... More
Supply, Installation,Testing & commissioning of Recessed mounted 24 watt 2'x2' LED celing luminaries suitable for indoor applications of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
12
-
-
... More
Supply, Installation,Testing & commissioning of Flexible LED strip wide viewing angle for good light distribution & IP 65 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
220
-
-
... More
Supply, Installation,Testing & commissioning of Frosted Glass with Chrome finishing Wall Lamp 1 LT , Fixture Height: 200, Lamp: E-14 LED 7W x1 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Jaquar - JNL-CHR-MB160275211A/ Havells/Klite/Philips)
12
-
-
... More
Supply, Installation,Testing & commissioning of Mirror light Description: 2 LT opal glass with chrome finishing wall lamp, Fixture Height: 60, Lamp: E-14 LED 4W x 2 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - Jaquar KWB-CHR-MB12021172A /Havells /Klite /Phillips/CG/Bajaj)
15
-
-
... More
Supply, Installation,Testing & commissioning of Bed side Lamp Description: 1 LT Opal Glass with Chrome Finishing Wall Lamp Fixture Height: 171 Lamp: G-9 LED 4W x 1 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - Jaquar KWB-CHR-MB12021341A /Havells /Klite /Phillips /CG/Bajaj)
22
-
-
... More
Supply, Installation,Testing & commissioning of LED base Foot light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Jaquar /Havells /Klite /Phillips /CG/Bajaj)
11
-
-
... More
Supply, Installation,Testing & commissioning of Number plate light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
11
-
-
... More
Supply, Installation,Testing & commissioning of Call bell Buzzer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
11
-
-
... More
Supplying, installation, testing & commissioning of 43" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)
11
-
-
... More
Supplying, installation, testing & commissioning of 45 Ltr Mini Fridge Refrigerator 3 star rating, single door of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/ Whirlpool)
11
-
-
... More
AIR CONDITIONING SYSTEM
-
-
-
... More
Supplying, Installation, Testing & Commissioning of Hi-wall 1.5 Ton Split AC of 5 Star Rating with Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)
7
-
-
... More
Supplying, Installation, Testing & Commissioning of Hi-wall 2 Ton Split AC of 5 Star Rating with Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)
4
-
-
... More
Supplying, Installation, Testing & Commissioning of 4 Ton Cassate A.C of 3- Star Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas /Bluestar/ Carrier /Daikin)
2
-
-
... More
Supply, Installation, Testing & Commissioning of Refrigerant Copper piping (Suction / Discharge) for proper functioning of Units. Refrigerant Copper Pipe insulated with manufacturer recommended thickness closed cell electrometric Nitrile Rubber interconnecting indoor & outdoor unit of various sizes of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
210
-
-
... More
Supply & Laying of Power & Control Cable 3 Core x 4 Sqmm Copper Cable of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
150
-
-
... More
Supply, Installation, Testing and commissioning of PVC Drain Piping of 50 mm diameter insulated with 6mm thick superlon insulation of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..
90
-
-
... More
FIRE FIGHTING SYSTEM AND FIRE DETECTION & ALARM SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
20
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
250
-
-
... More
Supply, installation, testing & commissioning of Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip. Hose and wall mounting bracket etc applicable on class B&C fire. B rating 34B, ISI Approved as per IS:2878:2004 (Fireshield) of approved make etc complete with all materials, labour & transportation as required as per the direction of Engineer-in-Charge. Make - Safepro/Firestone/Safex or Equivalent
6
-
-
... More
Providing and fixing Main Fire Alarm Control Panel - 4 zone with all necessory accesorries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..
1
-
-
... More
Telephone,CCTV & Sound System
-
-
-
... More
Supplying, installation, testing & commissioning of 20 Pair Crown MDF box of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..
1
-
-
... More
Supplying, installation, testing & commissioning of Beetel CLI Telephone Set of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
15
-
-
... More
Supply and Installation of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.). Make- Honeywell/UNV/Hikvision
6
-
-
... More
Supply and Installation of outdoor Bullet IR Network Camera 1/2.7" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing, ONVIF, POE IEEE 802.3af, (UL, FCC, CE, BIS certified). Make-Panasonic/ Bosch/Honeywell/UNV
2
-
-
... More
Supply and Installation of 16 CH NVR Support 12MP/8MP / 5MP / 4MP / 3MP / 1080P / 960P IP Adopt standard H.265 high profile compression format, With 4k Video Output, Compression Standard H.265, Network Access Bandwidth 320Mbps, HDD SATA × 8(Upto 10TB Supported), 1- e-SATA And 2-way Audio RCA × 1, Local Output RCA × 1, USB 2.0 × 2 (one in the front panel and the other in the rear panel), USB 3.0 × 1 (rear panel) (UL, FCC, CE, BIS certified).32TB(4TBx4nos) Storage Capacity, Make: Segate/WD Make- Honeywell/UNV/Hikvision
1
-
-
... More
Supply, installation, testing and commissioning of 43” Ultra HD Display, Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1, 100-240V, 50/60Hz, Interfaces: HDMI-2 or more, DP, Audio, USB 2.0, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC] with internal memory 50 MB or higher, Temperature Sensor, Auto Brightness Sensor, ISM Method, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, os, Smart Energy Saving- 70W or more, Industrial grade Certification- UL / cUL / CB / TUV / KC , FCC / CE / KCC, Warranty-3 years complete as required & as per Direction of Engineer-In-Charge. Make : Samsung/ LG /SONY
1
-
-
... More
Supplying, installation, testing & commissioning of 6W ceiling / wall mounted speaker of JBL complete of approved make complete with all materials & labour as required as per the direction of Engineer-in-Char
8
-
-
... More
Supplying, installation, testing & commissioning of 250 watt Amplifier with bluetooth & USB port facilities of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Bosch/ Crown/ Yamha)
2
-
-
... More
Supplying, installation, testing & commissioning of Cord less Microphone of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge (Sure/Sennheiser/ AKG)
2
-
-
... More
Supplying, installation, testing & commissioning of Wi-Fi celing router of approved make complete with all materials & labour as required as per the direction of Engineer-in-Char
7
-
-
... More
Supplying, installation, testing & commissioning of 65" commercial LED display with 4K UHD, ultra high Resolution of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge (Sony/ Samsung/LG)
1
-
-
... More
Earthing, Distribution Board, Panel Board & Cable
-
-
-
... More
Supplying, Installation, Testing & Commissioning of 2 meter long Electrode chemical earthing with 58 mm G.I galvanized electrode and 25 x 3mm G.I inner strip with 50x 6 mm copper connecting terminal with 2 bag of BFC (50Kg) of chemical earthing size of chemical earth bar 2 mtr size of earth feet 3’ x 2’ x 9’ chemical compound to be used 50K.g. including all cost of materials, labour, transportation, loading, unloading, T & P etc. complete as directed by the Engineer-in-charge.
8
-
-
... More
Supplying and laying 10 Sq mm copper conductor ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge.
80
-
-
... More
Supply, installation, testing & commissioning of Main pannel board 2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board. Incoming 250 Amp 4 pole MCCB 1 no, 300A TPN copper bus bar-1 Set,indicator lamp, struggle switch & fuses -3 Nos. Digital voltage current meter -1 No., 100/5A CT coil-3 Nos. Outgoing - 80 Amp 4 pole RCCB 2 nos, 63 Amp 4 pole RCCB 2 nos, 100 Amp 4 pole MCCB 2 Nos, 40 Amp DP RCCB 2nos & wire for wiring of approved make etc complete with all materials, labour & transportation as required as per the direction of Engineer-in-Charge.
1
-
-
... More
Supply & fixing of 12 way Single pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg.
1
-
-
... More
Supply & fixing of 4 way Triple pole and Neutral sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required as per the direction of Engineer-in-Charg.
2
-
-
... More
Supply & fixing of 4 way Triple pole and Neutral vertical double door load line distribution board complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
4
-
-
... More
Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
28
-
-
... More
Supply and fixing of 40 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
1
-
-
... More
Supply and fixing of 40 amp DP RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
10
-
-
... More
Supply and fixing of 63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
2
-
-
... More
Supply and fixing of 63 amp TP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
9
-
-
... More
Supply and fixing of 63/100 Amp 4 pole MCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
3
-
-
... More
Supply and fixing of 63 Amp 4 pole RCCB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.
4
-
-
... More
Supplying, storing, laying, testing and commissioning of 3.5 c x 95 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
80
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements