Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha Tourism Development Corporation Limited - OTDC Tender
Civil And Construction
Eprocure
Opening Date1 Sep 2021
Closing Date17 Sep 2021
Tender Amount₹ 2,49,22,479
Costs
EMD
₹ 2,61,760Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OTDC_70722_4Bid Award Id
ViewTender No
I/10/2021-22 dt.25.08.2021Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Disposal of excess earth by mechanical means / manually including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work (Upto 5 KM)
96.48
-
173.8
Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
315.58
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and ,es of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
3.65
-
4948
Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and ,es of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
51.1
-
6349.4
GROUND FLOOR
-
-
-
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including centering & shuttering,hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer incharege but excluding the cost and conveyance of HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position.
-
-
-
Foundation & bases of column
20.16
-
5804.9
Plinth Beam
17.82
-
6158.2
Columns
13.82
-
11464.1
Roof Beam
18.88
-
11464.1
Lintel
2.24
-
9310.9
Chajja, loft, kitchen platform , fins, coping & sill slab
0.62
-
837.1
Roof Slab
17.21
-
9922.9
Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
157.14
-
7966.1
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
59.46
-
4123.8
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
76.26
-
4157.1
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
20.56
-
4386.7
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. GROUND FLOOR
831.6
-
214.5
Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
283.84
-
139.3
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. GROUND FLOOR
141.56
-
155.5
Providing Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
21.13
-
2074.6
Providing Granite stone prepolished 20mm thick in dado of approved quality, colour and size in dado, riser of steps and dado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. GROUND FLOOR
1.8
-
2077.7
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
29.1
-
237.6
Providing & Fixing tiles 30cm x 30cm special plain / printed series ceramic floor tiles (Base price of the tile not less than Rs. 35 / sqft) having thickness 7mm to 8mm confirming to IS 13755 of approved make of Somany / Kajaria / OASIS in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing. work complete in all respect as per specification and direction of Engineer-in-charge.(in toilet floor area)
58.47
-
923.1
Providing & Fixing tiles of 30cm x 45 cm / 30 x 60cm / special plain/ printed series ceramic wall tiles of premium grade (Base price of the tile not less than Rs. 35 / sqft) having thickness 6.5mm to 6.7mm confirming to IS 13755 of approved make of Somany / Kajaria / Johnson or equivalent in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and cleaning .work complete in all respect as per specification and direction of Engineer-in-charge. (in toilet walls) GROUND FLOOR
567.53
-
989.2
Providing and fixing in position wood plastic composite door frame with appropriate length of ETA Approved carbon steel galvanized (minimum 5 microns) double threaded 6.8 grade Polyamide PA 6 grade sleeve HRD C 10 anchor suitable for fastenings both on concrete & masonary/aerated blocks including cost of all materials, labours, T & P etc required for the work. complete in all respect as directed by the Architect/Engineer-in-charge
30.6
-
1217
Providing and fixing of 35mm thick WPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
11.34
-
7035.4
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
432
-
71.1
Finishing wall surface of walls with wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P etc. complete the work as per the direction of engineer incharge.
973.16
-
71.8
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
973.16
-
135.3
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
283.84
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
14.4
-
187.6
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, ,es of all materials, labour, T&P, etc. required for the complete in all respects.
219.87
-
333.7
Supplying, Diluting & Spreading Chemical Emulsion like CHLORPYRIPHOS OR Other Chemical approved by the Central Insecticides Board as directed by the manufacturer and spraying the mixture uniformly by the sprayer as preconstructional antitermite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 litres (or as directed by the manufacturer) per sqm on vertical and 5.0 litres per sqm on horizontal surfaces, 50% of the emulsion to be filled in center to center etc. complete as per the holes made in trenches at 150m.m IS:6313/1981(Part-II) complete including cost, conveyance, loading, unloading and ,es of all materials, cost of all labour, T&P, sundries and scaffolding where required for the work etc. as directed by the Engineer -in -charge.( The payment shall be made on the basis of the actual measurement of the plinth area of the building at Ground Floor and vertical faces will not be measured for payment)
378.84
-
137
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
8.64
-
6912.15
Providing,fitting & fixing factory made u-PVC casement cum fixed panel window having both end single casement panel,middle fixed panels & at top completely fixed ventilator with SS friction hinges(350x19x19)made of big series frame 67x60mm,sash67x80mm,& mullion 67x80mm all having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc. complete as per specification and direction of Engineer-in-charge.
5.76
-
6478.75
Providing,fitting & fixing of premoulded decorative corner beading of gypsum having cross sectional dimension 112x80mm & fixing the wall etc complete as per direction of EIC.
114
-
399.5
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
20
-
339.1
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
214.34
-
300.8
WATER SUPPLY & SANITARY WORKS
-
-
-
Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.
16
-
14670.7
Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
8
-
10110.8
Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
10
-
1086.8
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
28
-
1373.4
Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
18
-
2160.8
Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
18
-
1579.7
Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
38
-
2361.5
Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
10
-
1856.1
Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
10
-
1792.7
Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
28
-
1183
Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
18
-
1705.6
Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
34
-
93.1
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Pillar cock of Jaquar Cat. No.-KUP 35001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
8
-
1960.4
Supplying all materials, labour, T&P and fixing standard size of 100mm dia. over head shower of jaquar cat no. -OHS 1989 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
20
-
1440
Supplying all materials, labour, T&P and fixing wall mixture hindware / jaquar cat no. -Con217 kn or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
20
-
3917.85
Providing and fixing white glazed urinals 26.5 x 31.5 x 44 cm Hindware (Cat no- 60011 Eqv OF Cera/ parryware) including plumbing connections with CPVC pipefrom the water supply line to the urinal complete and concealed C.I. brackets, C.P. flush pipe, 15 mm Dia. 1no C.P. spreaders, 1 Nos. C.P. waste coupling with 1 Nos.waste pipe , 1 No PVC P/S Trap with stainless steel grating in floor. Jointing, making good the damages caused to walls & floors, painting the brackets etc. Necessary pipes between urinal & main supply line to be included in the rates. Range of single urinal basin. cost including all materials, labour,tax, T&P, lead, royality etc.work complete in all respects as per direction of Architect incharge.
6
-
3285.6
Providing and fixing urinal glass partition of Jaquar JSE-CHR-810BR-US450X of sizeH-9Ocm & width 45cm including cost of all labour T&P etc complete as per direction of Engineer -in- charge.
4
-
4661.4
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
-
-
-
160mm dia PVC (SWR) pipe class "A" ( with wall thickness of 3.2mm to 3.8mm)
100
-
500.1
110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm)
140
-
264.2
75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm )
60
-
159.6
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification
240
-
367.9
Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge.
8
-
1931.57
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of ( AJAY/ ASHIRVAD/ ASTRAL) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
20 mm nominal outer dia Pipes
220
-
198.2
25 mm nominal outer dia Pipes
340
-
246.9
32 mm nominal outer dia Pipes
40
-
347.8
40 mm nominal outer dia Pipes
50
-
472.7
50 mm nominal outer dia Pipes
60
-
687
Cutting grooves in pucca floors and walls for taking GI/PVC /CPVC pipes including making good the damages caused with cost of all material,labour, scafolding, tools, plant, royalty etc. complete in all respects.
500
-
166
Supplying & Fixing two way Bib cock of CP brass of Jaquar continetnal cat no- CON-039/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
18
-
2160.8
Supplying & Fixing concealed stop cock of CP brass (Jaquar cat no-CON-069 , continental / eqv of crabtree / lauret) including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
6
-
1078.1
Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KB Brick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4) 30cm depth in bottom of chamber with 1/2" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3 & neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
-
-
-
Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension.
8
-
8505.3
Plain manhole inside 1200x900and 900mm deep with cast iron manhole and frame(medium duty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg.
8
-
14566
Providing and fixing 40mm dia CPVC fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
8
-
1971.5
Providing and fixing 50mm dia CPVC fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
8
-
2925.1
Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
40
-
44.75
Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)
4
-
24316.1
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
2
-
78254
Supplying, fitting & fixing of Hindware water closet (EWC Pan P-18) Mat Code-70002, wash basin (size-46cm x 36cm) with one pair mounting bracket, EWC & cistern complete with fittings and seat cover, one no. hinged rail 76cm & 4 Nos. of grab rails 60cm brass brackets. etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications.
2
-
74796.85
INTERNAL ELECTRICAL WORK
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
14
-
569.15
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
14
-
794.9
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
20
-
1078.05
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.0 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
402.15
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.0 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required.( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
4
-
621.75
Supplying and fixing of 4 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 20 amps socket outlet and 20 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
4
-
613.7
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
100
-
126.55
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
200
-
140.65
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
200
-
165.85
2 Nos. Single Core 10.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 4 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
160
-
261.34
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 12 way, Double door MAKE: LEGRAND, L&T, HAVELLS)
2
-
1912.5
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amp 2pole RCCB
2
-
1045
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
16
-
131.4
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
-
7
FITTINGS & FIXTURES:
-
-
-
Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. Make- Havells, BAJAJ, Wipro, Philips
-
-
-
Supply, Installation,Testing & commissioning of surface and wall mounted 18 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/ Wipro or Equivalent)
4
-
953
Supply, Installation,Testing & commissioning of 18 watt Surface mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
28
-
2624.41
Supply, Installation,Testing & commissioning of surface and wall mounted 10 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
20
-
728
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge (Make- Havells/ Bajaj/ Crompton or Equivalent)
-
-
-
200 mm EXHAUST FAN Plastic body
12
-
2263.45
450 mm EXHAUST FAN 1400 RPM.
4
-
5364.65
EARTHING:
-
-
-
Providing and fixing 25 mm x 5 mm Copper earth strip surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
40
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5285.9
BORE WELL(3 nos)
-
-
-
Sinking of 200mmx 150mm dia Tube well through DTH Rig.
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Labour for Drilling of 200mm dia bore
-
-
-
0 mtr to 30mtr
60
-
960.6
Labour for Drilling of 150mm dia bore
-
-
-
31mtr to 120mtr
255
-
890.8
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 150mm dia P.V.C casing pipes
315
-
1655.3
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
2
-
7953.9
By DTH/Rotary Rig
-
-
-
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
Sanitary sealing upto 5mtrs below ground level.
10
-
335.7
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
40mm dia brass or gun metal Non-return valve
2
-
1958.2
Supplying ,fitting & fixing of 1.5HP single phase submerssible pump Kirloscar(KS4AN-1518),including cost of material,labour,T&P etc complete as per spection & direction of EIC.
2
-
22174.75
DOL controll pannel (Kirloskr SCR1.5HP/1PH KS4)
2
-
3040
4.00sqmm cable
120
-
191.1
32mm dia steel short piece
4
-
152.3
Rope with cover
120
-
26.7
Well cap
2
-
152.3
50mm size CI bracket
4
-
91.3
40 mm dia HDPE pipes(Supreme/Ashirvad)
120
-
106.2
SEPTIC TANK & SOAK PIT- 2 nos
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
189
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
75.6
-
393.7
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
54
-
14.8
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
113.4
-
114
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
9
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
9
-
5593.3
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
9
-
5653.6
Providing strong, rigid, leveled, and plumbed centering and shuttering to required shape and size , for floors with ply or steel centering materials with all necessary bracing and tiles and supports with leveling centering covered with plastic sheet with provisions necessary holes and pockets for electrical conduits, pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas upto 4.3m height
90
-
429.1
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
9
-
7966.1
Providing Brick work in Foundation & Plinth with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
80.44
-
4123.8
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
346.5
-
191.1
Providing neat cement punning over plastered/ concrete surface including watering and curing complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. as directed by the Engineer in charge.
1039.5
-
32.2
Providing 6 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
90
-
155.5
Supplying & Fixing of Manhole cover ( heavy duty ) 450mm x 450mm water tight type including frame cost includes all material,labour, tax,lead tools & plant etc. complete
6
-
2500
Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge
6
-
10590.3
SOLID WASTE MANAGEMENT
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
11.49
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
7.66
-
393.7
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
7.66
-
114
Disposal of excess earth by mechanical means / manually up to 5 km distance including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work
11.49
-
173.8
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
23.78
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
2.61
-
4948
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
Footing
1.53
-
5804.9
Column
0.99
-
11464.1
Plinth Beam
0.9
-
6158.2
Lintel
0.2
-
9310.9
Chajja, loft, kitchen platform , fins & sill slab
1.8
-
837.1
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
4.61
-
7966.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
3.41
-
4123.8
Superstructure
7.04
-
4157.1
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
33.02
-
214.5
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
4.4
-
155.5
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
47.84
-
139.3
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
9
-
965
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
1.8
-
1053.2
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
163.35
-
71.1
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
37.41
-
71.8
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
37.41
-
135.3
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
47.84
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
5.45
-
187.6
Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier under and all-around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. complete (plinth area of the building at GROUND FLOOR only shall be measured) as per drawing, design and direction of Engineer-in-charge. (Chloropyrifos emulsifiable concentrate 1.0%)
14.27
-
137
Providing ,fitting and fixing of Iron work wrought and put up in trusses Steel Struss (With M.S. Pipe) with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
388.8
-
101.5
Providing ,fitting and fixing of plain formed TATA BLUESCOPE standard back coat coloured in standard length at 3000mm with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
12.96
-
824
Supply, Installation, testing & commissioning of 25 - 50kg Capacity ORCOMIN Machine.
1
-
470000
All Electrical Connection, Panel Board, Cables as per requirement.
1
-
40000
Consumables like Bioculum used as Digester, Sanitreat used for Odour control and Coir / Saw Dust used as Absorber for a period of 1 year from the date of handing over of machine.
1
-
120000
WATCH TOWER
-
-
-
CIVIL & STRUCTURE
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
16.57
-
205.3
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
11.05
-
393.7
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
11.05
-
114
Disposal of excess earth by mechanical means / manually Upto 5 KM including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work
16.57
-
173.8
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
23.36
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
6.68
-
4948
Providing & laying Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour, cess and T&P etc. required for the work complete.
1
-
6349.4
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
GROUND FLOOR
-
-
-
Footing
2.73
-
5804.9
Column
3.08
-
11464.1
Plinth Beam
1.49
-
6158.2
Lintel
0.47
-
9310.9
Chajja, loft, kitchen platform , fins & sill slab
0.62
-
837.1
Staircase
3.63
-
10985.6
Beam
1.93
-
11464.1
Roof slab
0.66
-
9922.9
FIRST FLOOR
-
-
-
Column
1.92
-
12708.9
Lintel
0.54
-
10125.1
Chajja, loft, kitchen platform , fins & sill slab
0.72
-
936.4
Staircase
3.63
-
10985.6
Beam
1.93
-
12708.9
Roof slab
0.66
-
10859.6
SECOND FLOOR
-
-
-
Column
1.92
-
14308
Lintel
0.54
-
11098.04
Chajja, loft, kitchen platform , fins & sill slab
0.72
-
1055.3
Staircase
3.63
-
13509.6
Beam
5.64
-
14198.6
Roof slab
3.17
-
11979.4
THIRD FLOOR
-
-
-
Column
1.92
-
14308
Lintel
0.2
-
11207.46
Chajja, loft, kitchen platform , fins & sill slab
0.35
-
1275.2
Beam
5.64
-
14308
Roof slab
3.17
-
12088.8
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
-
-
-
GROUND FLOOR
23.48
-
7966.1
FIRST FLOOR
15.74
-
7989.5
SECOND FLOOR
25.67
-
8014
THIRD FLOOR
19.67
-
8039.8
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
Ground Floor
-
-
-
Foundation & Plinth
6.34
-
4123.8
Superstructure
7.45
-
4157.1
First Floor
7.19
-
4419
Second Floor
7.19
-
4720.1
Third Floor
8.66
-
5066.4
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
-
-
-
Ground Floor
42.27
-
198.2
First Floor
38.08
-
203
Second Floor
38.08
-
208
Third Floor
39.44
-
213.1
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
47.62
-
155.5
First Floor
49.72
-
159.3
Second Floor
41.34
-
163.2
Third Floor
13.39
-
167.3
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
Ground Floor
53.24
-
139.3
First Floor
41.34
-
142.6
Second Floor
41.34
-
145.9
Third Floor
38.19
-
149.2
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
33.49
-
2074.6
First Floor
17.91
-
2084.3
Second Floor
16.56
-
2094.5
Third Floor
29.07
-
2105.1
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
6.03
-
2077.7
First Floor
5.36
-
2092.3
Second Floor
5.36
-
2106.6
Third Floor
2.81
-
2121.6
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
-
-
-
Ground Floor
40.1
-
237.6
First Floor
38
-
237.6
Second Floor
38
-
237.6
Third Floor
29.3
-
237.6
Providing and fixing in position wood plastic composite door frame including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 40x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including panting two coats of synthetic enamel paints over a coat of primer both of approved brand and shade to exposed surface including cost, conveyance, loading, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
-
-
-
Ground Floor
0.05
-
1217
Third Floor
0.05
-
1217
Providing and fixing of 35mm thick ISI marked factory made flush door shutters conforming to IS 2202 (Part-I) both side commercial of approved make , both faces of shutters finished with 1mm thick lamination , teak edge leaping to the periphery of shutter with polishing as per detail drawing with requsite glazing including, all hardwares & fixtures, SS brush finish cylindrical lock of Godrej / doorset or equivalent make ,tower bolt- 260 x 10mm & handle- 125mm with 175x 32mm plate - 2 no, hinges -125mm x 70mm x 4mm -4 nos , door stopper etc. complete as per the direction of architect incharge.
-
-
-
Ground Floor
2.21
-
7035.4
Third Floor
2.21
-
7035.4
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
-
-
-
Ground Floor
291.6
-
71.1
First Floor
388.8
-
71.1
Second Floor
388.8
-
71.1
Third Floor
291.6
-
71.1
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
-
-
-
Ground Floor
89.89
-
71.8
First Floor
87.8
-
73.1
Second Floor
142.16
-
73.1
Third Floor
52.82
-
73.1
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
89.89
-
135.3
First Floor
87.8
-
138.3
Second Floor
142.16
-
141.4
Third Floor
52.82
-
144.6
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
Ground Floor
53.24
-
129.6
First Floor
41.34
-
134.6
Second Floor
41.34
-
139.9
Third Floor
38.19
-
145.4
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
-
-
-
Ground Floor
9.72
-
187.6
First Floor
12.96
-
192.5
Second Floor
12.96
-
197.6
Third Floor
9.72
-
202.7
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
Ground Floor
50
-
430
First Floor
50
-
430
Second Floor
50
-
430
Third Floor
50
-
430
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respects.
-
-
-
Ground Floor
85.07
-
333.7
First Floor
85.07
-
333.7
Second Floor
85.07
-
333.7
Third Floor
226.94
-
333.7
Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier under and all-around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. complete (plinth area of the building at GROUND FLOOR only shall be measured) as per drawing, design and direction of Engineer-in-charge. (Chloropyrifos emulsifiable concentrate 1.0%)
44.52
-
137
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
-
-
-
Ground Floor
9.72
-
6912.15
First Floor
12.96
-
6912.15
Second Floor
12.96
-
6912.15
Third Floor
9.72
-
6912.15
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. Third Floor
47.82
-
390.8
INTERNAL ELECTRICAL WORK
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
2
-
567.23
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
12
-
792
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /KEl )
1
-
1074
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
-
552.7
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor / Havels / V Guard/KEl )
8
-
670
Supplying and fixing of 4module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15 / 16 amps socket outlet and 15 / 16 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
8
-
629.82
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,6 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor / Havels /KEI ) 6 Module (200mmX75mm)
5
-
898.76
Supply, delivery, installation & testing of AC boards consisting of 1 No 20-A DP Modular switch with indicator and 1 No 16A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge.
11
-
907
Supplying and fixing of 100W,step type regulator, 2 Module without base and cover including connection etc as required. (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
12
-
466.52
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
28
Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.
50
-
39
Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
60
-
40
Supplying and fixing of RJ11 telephone jack single with shutter & RJ 45 computer jack with shutter, 2module modular base and cover including connection for telephone and LAN . (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
1
-
441.65
Supplying and fixing T.V. antenna socket outlet piano type ISI marked on the existing switchboard / cover including connections etc as requird.
4
-
100
Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Computer / Circuit or Sub main wiring as required & as per Direction of Engineer-In-Charge.
-
-
-
20 mm dia.
20
-
92
25 mm dia.
10
-
94
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
250
-
125
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
210
-
139
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
190
-
156
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.
160
-
407
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) MAKE:LEGRAND,L&T,HAVELLS) 4 way, Double Door TPN DB
2
-
1614
Supplying and fixing following rating, double pole, (single phase
and neutral), 240 V, residual current circuit breaker (RCCB),
having a sensitivity current 300 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required. 40 AMP 4POLE MCI
2
-
562
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
24
-
129
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
7
MAIN DISTRIBUTION BOARD
-
-
-
PANEL BOARD:
-
-
-
Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. MAKE-L&T / LEGRAND / C&S)
-
-
-
Main Panel Board:
-
-
-
Incoming:
-
-
-
Incoming: 100 Amp. 4P MCCB 16 KA (Thermal Magnetic Release) - 1No
-
-
-
125 AMP 4WAY MANUAL CHANGOVER SWITCH 1 NO
-
-
-
Equiments:
-
-
-
4 Nos. 80 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code).
-
-
-
1 No. VAF Digital Meter.
-
-
-
3 Nos. RYB LED Indicator.
-
-
-
3 Nos.63 / 5 Amp. C.T. Operated.
-
-
-
Outgoing:
-
-
-
1 Nos of sub Meter connection
-
-
-
2 Nos 40 AMP DP MCB 10 KA
-
-
-
3 Nos.63 Amp. 4P MCB 10 KA.With spreadentinle & cable alloy
1
-
39171
FITTINGS & FIXTURES:
-
-
-
Supply of Surface mounted indoor type 20 WATT LED TUBE with aluminium housing , OPAL diffuser and Lamp Similar to HAVELLS Cat No. LHEXARP7IN1W020 complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge (Make- Philips, Wipro, HAVELLS, BAJAJ)
26
-
588
Supply of 10 WATT LED BOLLARD LIGHT Similar to BAJAJ BGBOM 650 9W LED WW complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
10
-
5230
Supply of 9 WATT LED BULB type Luminaire with LED Similar to complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
6
-
489
Supply of Wall bracket light with 1 N x 4 W A45/Candle LED Filament Lamp holder type Luminaire with LED HAVELLS MAKE LHFOAIC1TZ1I040 Similar to complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make- Philips,Wipro, HAVELLS,BAJAJ)
14
-
2367
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
56
-
184
Numbering of ceiling fan/ exhaust fan/ light fittings as required.
86
-
23
Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc good buy dust proof segment or simillar to to complete assembly . including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Engineer-In-Charge.(Make-Khaitian , USHA, HAVELLS,Bajaj)
-
-
-
1200 mm 48 '' Sweep Ceiling Fan 210 CMM Air Delivery.
20
-
3284
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-chargeMake-Khaitian , USHA, HAVELLS,Bajaj)
-
-
-
450 mm Turbo HD EXHAUST FAN 900 RPM.
3
-
5050
230 mm EXHAUST FAN 900 RPM.
6
-
1812
EARTHING:
-
-
-
Providing and fixing 25 mm x 5 mm Copper earth strip in 40 mm dia G.I. pipe surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
501
Extra for using salt and charcoal for G.I or copper plate earth as required and making good the damages caused complete as required and as per direction of Engineer-in-charge
2
-
682
Providing and fixing 8 SWG COPPER wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required and making good the damages caused complete as required and as per direction of Engineer-in-charge
30
-
57
Earthing with COPPER plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
2
-
4859
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
100
-
121
Supply, Laying and Testing of following Size XLPE insulated 1.1 Kv alluminium armoued cable making good the damages caused as required complete as per Direction of Engineer-In-Charge. (Make: polycab,KEI)
-
-
-
25 mm2 3 1⁄2 Core , Al Armoured , XLPE Cable( FOR PANEL)
100
-
378
Flexible Power Cable : Cu 3 core x 2.5 Sq mm, 11KV Grade, FRLS for power panel to lights at poles
100
-
124
Supply of all materials like cable lugs, gland etc as required & terminal of below mentioned cable complete as per required technical specifications & direction of EIC
-
-
-
25 mm2 3 1⁄2 Core , Al Armoured , XLPE Cable
3
-
310
Supplying of following Materials
-
-
-
First Aid Box.
1
-
750
Shock Treatment Chart (Odia / Hindi & English).
1
-
525
8 mm thick Rubber Mat.
12
-
770
ABS type Fire Extinguisher of 4.5 Kg.
1
-
3800
Danger Board.
1
-
120
PATHWAYS & PARKING
-
-
-
Earth work in stoney earth and gravels mixed with stone and boulders not exceeding 0.014 cum in volume within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
624.8
-
205.3
Supplying and filling with sand in layers not exceeding 300mm depth, well watered and rammed etc. speading in low laying of the work as directed by the Architect/Bank's Engineer/Architect including transporting etc. for complete the job. (Measurement will be taken from consolidated volume only).
312.4
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and ,es of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
31.2
-
4948
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
390.8
-
1825.6
Providing & fixing precast ,precured Cement Concrete [1: 1.5 :3 ] kerb stone [450 x300x175mm] with graded stone aggregates & fixing in position & pattern as shown in drawing in cement mortar [1cement: 6 coarse sand] & pointing in cement mortar [1cement: 2 coarse sand] including necessary excavation & filling side treanches etc. including cost of all materials, labour, tax, lead, T&P etc. complete in all respects as per the direction of Engineer/ Architect-in-charge.
320
-
85.22
Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking UNI PAVER pavers of 60MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
2082.68
-
879.5
SITE DEVELOPMENT,LAND SCAPING, BEAUTIFICATION & PROMENADE
-
-
-
PLANTER DEVELOPMENT (BOTH SIDE FROM MAIN GATE TO BUILDING AS IN THE DRAWING)
-
-
-
Supply of good earth for filling of planter box size (3ft X2ftX1ft X386=2316)
2316
-
10
Supply of and Planting of IXORA 'RED THAI DWARF’ inthe planter in two rows in a distance of 1.5ft from plant to plant (386 ft X 2 rows) including supply and application of compost, pesitcide etc complete
772
-
60
3TIRE GREEN BELT DEVELOPMENT ALONG THE BOUDARY WALL
-
-
-
Digging of pit (0.6X0.6X0.6M) for all plants
715
-
17.69
Supply, mixing and refefilling of good earth
2500
-
12.12
Supply and mixing manure and pesticide complete
380
-
25
Stake of plants with bamboo stump- 6ft including tie of same
475
-
50
Supply and planting of plant Juniperus /Eugenia-4 to 5 ft Height in 18 x18 inch poly bag size
80
-
400
ficus reginald 5 to 6 ft 18 x18 inch poly bag size
120
-
500
Plumeria alba dwarf 5 to 6 ft 18 x18 inch poly bag size
100
-
400
Supply of fox tail plalm (Wodyetia bifurcata) 6 to 8 ft 18 x18 inch poly bag size
80
-
800
Supply of lagerstroemia indica (chena fula) 4 to 5 ft 10 x10 inch poly bag size
120
-
150
Lawn Development
-
-
-
LAWN DEVELOPMENT:-Preparing Lawn with lawn grass (zoysia japonica-carpet grass) obtained from a healthy and properly maintained the lawn (free from weeds and other foreign materials) and laying on the supplied soil medium with garden soil mixture of farmyard manure, river sand and red earth in appropriate ratio to an average depth of 0.15m, in dibbling method at the distance of 3 to 4 inch as per the location, drawings and specifications provided, including material cost of fertilizer, pestcide,lawngrass etc complete including three month maintenance.
-
-
-
Excavation of existing land upto 0.5 ft
25000
-
4.8
Supply of good earth
40000
-
10
leveling and dressing , clearing of debrish etc complete
25000
-
1.2
Supply and spreading of sand
12000
-
10
Supply and apply of pesticide contol of termires and othe pests
25000
-
2.2
Supply and laying of zoysia grass /board leaf grass
25000
-
15
Permanent Flower Bed (4.5 X 20 ft 8 N0s) including supply and planting material cost plant(rose/ allmunda/ hibiscus ect flower , fertilizer, pit making and plantation complete.
8
-
2500
Supply and planting of ground cover wedelia/ tradescantia/ zephyranthes lily- 7 ft height in 18 X18 inch poly bag in a pit of 2ft X 2ft X 2ft including material cost plant, fertilizer, pit making and plantation complete.
950
-
40
Supply and fixing of brick (border of planter beds)
20
-
3900
Irrigation though sprinkler system
-
-
-
Supply and fixing of UPVC SH-80 pipes including plumbing , fittings, solvent cement complete with all respect as directed by EIC.
-
-
-
40 mm UPVC SH-80 pipes
50
-
496
20 mm UPVC SH-80 pipes
400
-
384
Supply, fixing and fitting of gear driven pup-up of reputed make HUNTER/Rainbird
20
-
1800
Supply, fixing and fitting of pup-up guard 4 inch SH-80 pipes of reputed make HUNTER/Rainbird
25
-
1048
Supply, fixing and fitting ofscreen filter of 25 mq
1
-
4500
Supply , fixing and fitting of 3hp open well submesible pumpset
1
-
30000
Supply , fixing and fitting of 65 mm gunmetal gate valve 4 nos
2
-
6000
Supply , fixing and fitting of 40 mm air release valve
4
-
1800
Supply , fixing and fitting of valve chamber
4
-
2200
Maintenance for First year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
2078
-
10
Weeding through out the year
2078
-
5
Mowing Every two months interval
2078
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
950
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
915
-
78
Maintenance for Second year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
4000
-
10
Weeding through out the year
4000
-
5
Mowing Every two months interval
4000
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
1200
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
1260
-
78
Providing & fixing RCC decorative animal/ statue sculptures upto height 4'0" with approved paint and texture including watering and curing rounding of conners etc. including cost of all materials, labour, tax, lead, T&P etc. complete in all respects as per the direction of Engineer/ Architect-in-charge.
10
-
16000
FRP / Decorative Works
-
-
-
Providing Decorative Ornamental cement plaster like Bamboo/Bullaha/Straw/Plank design as per specification and didection of E.I.C.on structural wall or roof with the plaster is to be made of cement mortar of proportion (1:3) with cement oxide colour or any other approval material including cost,material,conveyance,and labour charges etc.
1815
-
220
Consideration of R.C.C. Ornaments three trunk sitting chair 5'0'' length standingon cutting there with back rest as Bullhi or Bumboo design made of R.C.C.(1: 11|2: 3 )with adequate reinforce Cemeta finishing the structure with using Cement oxide paint involving all cost conveyance, royalty & texes of all materials compiled.
15
-
15000
Providing fitting and fixing of FRP Butterfly of average height 8 ft made of resin,accelaretator.catalyst,glass,fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
66700
Providing fitting and fixing of FRP Deer Family 3 nos of in average height4 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
33500
Providing fitting and fixing of FRP Elephant Family 2 nos of in average height 10 ft and of 5 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
2
-
138000
Providing fitting and fixing of FRP Tiger Family 2 nos of in average height 6 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
4
-
31050
Providing fitting and fixing of FRP Tree with Bird in average height 7 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
3
-
26450
Providing fitting and fixing of FRP Bear 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
3
-
20700
Providing fitting and fixing of FRP Dustbin ( Rabbit ) 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
8
-
6670
DRAIN
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
67.5
-
205.3
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
13.5
-
114
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
9
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
9
-
4948
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
Foundation
7.5
-
5804.9
RCC Wall
22.5
-
10008.9
Slab
8.1
-
9922.9
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
38.1
-
7966.1
Providing 16 mm. thick cement plaster with neat cement punning over plastered in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
150
-
214.5
SIGNAGES
-
-
-
Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 3mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter/DIGITAL PRINTING SYSTEM the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge.
-
-
-
a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage as per specification & direction of Enginner-in-charge
480
-
470
Required stainless steel frame of 80mm NB made out of 304 grade steel pipe including cost, transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage
700
-
400
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying corncrete, ramming, watering and curing etc complete to required levels laid in layers not cxceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalities an dtaxed all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specifiation and direction of Engineer-in-Chrge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos
5.1
-
6349.4
PHOTOGRAPHY ZONE
-
-
-
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
6.07
-
205.3
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
2.43
-
114
Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
32.44
-
408.73
Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
8.66
-
4948
Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.
7.2
-
4123.8
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
20.44
-
139.3
Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted pre-cast interlocking pavers of 60mm thick, preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
28.44
-
620
Providing and Fixing white fiber made Selfie point ( I Love PARADEEP of 4 feet height ) as per design and specification with artifical tree and seven numbers wild Monkey on it as per the direction of The architect
13
-
8900
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
24
-
2074.6
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
16.8
-
2077.7
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
28
-
237.6
BOUNDARY WALL & ENTRANCE GATE
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department
89.86
-
205.3
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
11.23
-
408.73
Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
7.49
-
4549
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
Foundation and Column Base
18.72
-
5804.9
Plinth beam
10.88
-
6158.2
Column & Beam
5.85
-
11464.1
Lintel
6.53
-
9310.9
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
39.52
-
7966.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
32.63
-
4123.8
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for superstructure with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
76.13
-
4157.1
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
304.5
-
214.5
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
304.5
-
139.3
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
771.4
-
129.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
1800
-
71.1
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
36
-
187.6
PATHWAY LIGHTING (STREET DECORATIVE POLE)
-
-
-
Supply, installation, testing & commissioning of 3 mtr long aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder fnish.The Pole shall have base Plate with provision for founation bolt fittings and inbuilt suitable Pole Fuse Box for Loop In and Loop Out Cable heavy duty cable connector, 6 Amp. SP MCB with Water proof cover on Pole Fuse Box.Compatible for all suitable size for cable entry & exist as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Havells / BAJAJ/CG
20
-
19046
Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole. Suitable for pole dia Ø 76 mm etc complete with connection from terminal in the pole, complete with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of Engineer-in-Charge.Make: Havells- Ruby / BAJAJ /Wipro
22
-
11325
Supply, installation, testing & commissioning of Hot dip Galvanized Octagonal poles with base plate fabricated from special steel plates as per BSEN 10025/IS 5986 and of 8 mtr length in single section being 155mm at bottom Dia and 70 mm at top Dia and 3.0mm thickness with foundation base plate of size 250 mm x 250mm x 16mm thick Hot Dip Galvanization of both internal and external surface with minimum thickness of 86 Microns more that 600 gm/ sqm as per IS: 4759 specification. 1mtr long (Galvanized ) single arm bracket made out of 60 mm outer diameter Hot dip tubular pipes and welded to fit the top of the above pole and Plate for rigidity between cap and pipe with provision of passing the electrical cable from the pole to the end of the arm for connection of the luminaries, with provison of Electrical Termination junction in side the pole at a height of 1mtr(maximum) from the bottom of pole, with clamps, 4way 100Amps / 400Volts connector, 6/10 Amps / 230 Volts / 10KA SP MCB, Cable gland at bottom of suitable size for cable entry & exist.
2
-
24532
Supplying, installation and commissioning of 90 W LED street light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of arms mounted on the GI octagonal poles complete with connection from terminal in the pole, complete with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of direction of Engineer-in-charge.
2
-
10968
Construction of RCC foundation of 1950 x 650 x 650 mm size by using M25 brade RCC and Fe-415 grade steel reinforcement .The scope of work includes necessary excavation of soil and back filling after completing the foundation work, fixing the EN 8 grade J type foundation bolts and 63 mm dia PVC /HDPE pipe inside the foundation for cable entry. The Biddershould execute the work as per the attached foundation drawing and direction of EIC.
22
-
5173.8
Supplying, storing, laying, testing and commissioning of 4c x 6Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
280
-
237.55
Supply, delivery, laying, testing complete as required & as per the direction of Engineer-in-charge of 3 x 4sqmm FRLS PVC Insulated cooper conductor cable with its protection pvc pipes with excavation of cable trench in all kinds of soil & rock and back filling with excavated soil from panel to pole. The cable shall have ISI marking and name of the manufacturer on the body of the cable
120
-
242.55
Supply, installation, testing and commissioning of street light control panel (Floor mounted outdoor type) made out of 2mm thick CR sheet enclosure with 1 no. 63 Amp 4P MCB as incomer and 3 nos 32A 4P MCB, and suitable timmer switch as outgoing 3 phase 4 wire, 10-40A static type tested KWH Meter inside tamper proof locking arrangement , time switch and contactor for automatic on/off of the lights and suitable arrangement for 3 ½ x 25 mm2 cable for entry /outgoing of 4c x 16mm2 cable, complete with locking arrangement as required as per technical specification and instruction of EIC.
1
-
26876
Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing studs/ bolt of the pole complete including supply of all materials.
22
-
250
Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
40
-
283.2
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
12
-
458.8
Supply & laying of 50mm size (M) G.I. pipe for cable passing through the road with necessary fittings as required as per the direction of EIC.
5
-
450
FAÇADE LIGHTING
-
-
-
Supply, installation, testing & commissioning of LED strip light 24V, power consuption 12W/Mtr, 60 watt LED/Mtr, protection rating IP65,Color:RGBW and fixing arrangements to fix the lights.Roll of 5 mtr. (Without DC Power Drive) Code: LK STP 12 RGB etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
60
-
1144
Supply, installation, testing & commissioning of high quality spot light, Power:3W, CCT:3000K/5600K/Amber, Protection Rating:IP65 ,additional wall mount yoke arrangements for fixing the lights.Beam Angle15º/25º ,Body:Diecasted/extruded aluminium,Optics Designed to minimize hotspots.Power Input:DC 24V (without DC Driver) Code:LK SL 03T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
5
-
1614
Supply, installation, testing & commissioning of High quality 4way star light Protection Rating:IP65,with wall mount arrangement for fixing the lights.Power:4x2W,CCT:3000K/5600K ,Beam Angle 5º,Body: Diecasted/ extruded aluminium,Optics Designed to minimize hotspots & fringing incolor mixing applications. Power Input : AC 220V, 50Hz. Code: LK 4WAY 08T/D/A etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
2
-
13264
Supply, installation, testing & commissioning of high quality two way decorative light,Power:12W,CCT:3000K/5600K, Protection Rating:IP65, additional wallmount yoke arrangements for fixing the lights. Beam Angle 15º,Body:Die casted/extruded aluminium,Optics Designed to minimize hotspots. Power Input : AC 110-230V, 50Hz. Code: LK 2WAY 12T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
4
-
10611
Supply, installation, testing & commissioning of PVC insulated multicore electrical un armored flexible 3Cx1.5Sqmm powercable having less electrical losses.This PVC insulated and round sheathed wire featuresabright multistrands copper conductors and it supports voltage grade upto 1100V etc complete as per the direction of Engineer-in-Charge.( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
150
-
91
Supply, installation, testing & commissioning of 5core DMX cable comprises twisted pairs with shield support for carrying of data.DMX 512cable isused for connecting all light consoles that use DMX512 standard data transmission etc complete as per the direction of Engineer-in-Charge.
100
-
88
Supply, installation, testing & commissioning of IP65 "T" power connectors easy and extremely precise locking system.High impact materials-long-lasting and reliable etc complete as per the direction of Engineer-in-Charge.
12
-
996
Supply, installation, testing & commissioning of IP65 "T"DMX connectors having 3/5 polecable connector,Male/Female connector with improved latch,cage type contacts,"solder stop"for easy soldering,and additional ground contact for best contact integrity between chassis and cable connector.More durable housing for maximum reliability etc complete as per the direction of Engineer-in-Charge.
5
-
1659
Supply, installation, testing & commissioning of Power Distribution Board made up of MS Sheet metal fabricated housing blackpowder coated an divery connectors for the internal terminations and external outgoing connecting points,fibre/brass glands of suitable size fitted MCB control for outgoing circuits.- 9 Nos of 6/10A SP Outgoing MCB's.- 1No of 16A TPN Incoming MCB etc complete as per the direction of Engineer-in-Charge.
1
-
25000
Supply, installation, testing & commissioning of waterproof power junction box/powercable terminal box,IP65 made up of rugged,non-corrosive,high impact polycarbonate,moldednylonen cases connectors that use screw compression to secure the wires,protection against waterjets and dust from all directions,includes 5Way min 10A connect or terminal block Max. dimension : 80 * 250 * 85mm etc complete as per the direction of Engineer-in-Charge. Make Hansel or Equivalent
3
-
1201
Supply, installation, testing & commissioning of DMX isolator or splitter provides Isolate do ptical DMX splitter provides 8 outputs from a 1 input and Input voltage:AC 110 to 220V,50Hz,Product features: Group 1 & group 8 DMX signal change etc complete as per the direction of Engineer-in-Charge.
1
-
30000
Supply, installation, testing & commissioning of DmX Controller 12 Faders to controlat least 12channels with master control fader, scene saving option,LCD display,smooth movement faders,easy access keypads,12 Physical Fader unit for direct access,DmX 512 protocol,Incremental Channel Up&Down Buttons,Slow blow safety fuse,optional chase & multifunction keys. Code: LK CX-3 etc complete as per the direction of Engineer-in-Charge.
1
-
80692
Supply, installation, testing & commissioning of additional accessories for installing the lights asper the final drawing/ site condition consisting of clamps, brackets, angles, conduites ,joints,hardwares like fasterners, nut & bolts etc complete as per the direction of Engineer-in-Charge.
1
-
66700
PARKING LIGHTING (12.5 MTR HIGH MAST LIGHT)
-
-
-
Supply delivery installation and testing of 12.5 mtr long semi highmast
galvanised lighting mast of thickness 3.1 mm having pole dia
150 mm at top & bottom dia 350mm base plate of 25mm thick having
pole arrangements for fixing of 04 no 25mm dia 750mm long
foundation bolt complete resistance to wind speed as per is-875 ,
part-iii , octagonal shape complete assembly containing inner &
lantern ring 06 way , 3 way frp Junction box with the bottom single
drum winch 03 no.s 4 mm dia steel wires disc 6mm wire single from
compensating disc to winch 1-1/4" dia 750 mm dia foundation bolts
etc.as required provision for 06 no.s 200w LED Light luminaries .The
mast will have both manual & motorise system to be operated at 3
phase 440 volt with aviation light arrangements & complete as per
the site requirements of approved make as per the direction of Engineer-in-Charge.( Bajaj/Velmont)
1
-
250000
Supply of raising lowering system comprising double drum winch, 5mm dia meter SS wire rope, trailing cable, connector,integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from junction box to individual luminaire & MCB in base compartment are not included and are a part of installation).of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
65500
Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template etc. as required. as per the direction of Engineer-in-Charge..
1
-
7600
Construction of suitable shallow foundation M24 x750 (6 Nos.)with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capasity at site as 10T/sqm. At 2X2 mit. Depth with all materials and labour charges (as per drawing) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
36000
Erection of 12.5 m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
18000
Supplying and erection of LED avition obstruction light Lumainair ( Bajaj 110731) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
4480
Supplying and fixing double door MS feeder piller box with near the high mast towerProviding the following component ( switching acc.) inside the fidder piller including internal wiring all. Complete for autometic , timely OFF/ON for operating of (6 to 8 nos) 200 LED lighgting fitting. i)63 A 4 pole MCB isolater 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no,VIII) 6 AMP SP MCB 6 NOS of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
1
-
25000
Supply, Installation,Testing & commissioning of of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 200 watt flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
6
-
22000
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
2
-
5285.9
Providing and fixing 25 mm x 5 mm GI earth strip in 40 mm dia G.I. pipe surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
12
-
458.8
Supplying, storing, laying, testing and commissioning of 4c x 10 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
60
-
269.3
25 KVA DG SET
-
-
-
Supply, installation, testing & commissioning of 25 KVA 3 phase Silent DG set with AMF Panel. The DG set must be latest CPCB approved of etc complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Jakson / Kirloskar/Ashok leyland
1
-
652530
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5285.9
25 KVA SUBSTATION
-
-
-
Construction of 3-ph., 3-wire 11KV line with 9 mtr 300Kg PSC Pole for Pin Point and two nos Cut points with double disc arrangement of 55mm AAAC. (80mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.35
-
316147.39
Supply & fixing of Construction of Double pole Mounted 11/.4KV Sub station using 9mtr. X 300kg long PSC Pole with double disc arrangement for 25KVA Transformer including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge. (Electrical Inspection should be done by the Contractor through appropriate authority)
1
-
200414.28
Supply & fixing of Construction of 3-phase 50 sqmm AB Cable on 8mtr x 200Kg PSC Pole for LT line (30mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.25
-
588113.08
Supply & fixing of Barbed wire fencing boundary wall including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
17140
Providing metal spreading using 40mm metal including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
10000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements