Odisha State Road Transport Corporation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 86,900Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OSRTC_76634_1Bid Award Id
ViewTender No
111/GM/28/OSRTC/2021-22Tender Authority
Odisha State Road Transport Corporation ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
135.98
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
36.73
-
3768.31
F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN FOUNDATION & PLINTH
11.14
-
4132.55
F.A brick masonary work in cement mortar (1:6) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN SUPERSTRUCTURE.
-
-
-
GROUND FLOOR
64.91
-
4165.55
FIRST FLOOR
10.7
-
4427.82
F.A brick masonary work in cement mortar (1:4) using F.A bricks of 23cm x 11cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN SUPERSTRUCTURE.
-
-
-
GROUND FLOOR
2.7
-
4351.2
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
-
-
-
GROUND FLOOR
106.08
-
4291.75
FIRST FLOOR
1.65
-
4374.7
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
-
-
-
GROUND FLOOR
132
-
8910.76
FIRST FLOOR
2.9
-
8934.17
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
-
-
-
GROUND FLOOR
250.91
-
103.22
Rigid and smooth centering and shuttering of RCC works including false works of Lintels including removal of form work at all depth and heights.
-
-
-
GROUND FLOOR
35.29
-
258.74
Rigid and smooth centering and shuttering of RCC works including false works griders,beams,column including removal of form work at all depth and heights.
-
-
-
GROUND FLOOR
318.4
-
724.1
FIRST FLOOR
22.3
-
868.92
Rigid and smooth centering and shuttering of RCC works including false works roof slabs,Landing, balconies, projecting sun shades and chajja etc including dismantling them after casting including cost of materials etc complete.
-
-
-
GROUND FLOOR
89.18
-
422.08
Rigid and smooth centering and shuttering of RCC works including false works of RCC walls and fins etc including removal of form work at all depth and heights.
-
-
-
GROUND FLOOR
62.1
-
619.03
16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height.
-
-
-
GROUND FLOOR
327.94
-
191.04
FIRST FLOOR
42.11
-
195.88
6mm thick cement plaster in cement mortar 1:4 to RCC surfaces finished smooth including closed deep chiping and slurry treatment with necessary scaffolding, curring etc all complete.
-
-
-
GROUND FLOOR
287.05
-
150.03
FIRST FLOOR
8.36
-
153.83
12mm cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. All complete at all depth height for out side portion wall.
-
-
-
GROUND FLOOR
356.12
-
133.3
FIRST FLOOR
42.11
-
138.74
Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete.
-
-
-
GROUND FLOOR
971.1
-
58.3
FIRST FLOOR
92.59
-
60.73
Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. (ASIAN (ULTIMA) / BURGER (Anti Dust) / and DULUX (Weather Shield).[NSWI]
-
-
-
GROUND FLOOR
354.77
-
104.32
FIRST FLOOR
92.59
-
106.93
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.(N.S.W.I)
-
-
-
GROUND FLOOR
616.33
-
111.77
Wall painting two coats with plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application.(ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). [NSWI]
-
-
-
GROUND FLOOR
616.33
-
98.04
Supplying, fitting and fixing of M.S grills, M.S angles including cost of labour materials transportation etc.complete.
-
-
-
GROUND FLOOR
1750
-
94.77
Enamel painting two coats with cost of all material, labour, T&P etc complete.
-
-
-
GROUND FLOOR
81.29
-
133.43
One coat of priming with approved primer over new wood work. with cost of all material, labour, T&P etc complete.
-
-
-
GROUND FLOOR
81.29
-
57.7
Supplying, Fitting & Fixing of 10 mm thick Digital glazed Vitrified Tile in floor of size 600mm x 600mm of approved shade laid on leveled CC Course with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. (Tiles must be SOMANY, KAJURIA, NITCO, VARMORA and RAK). Per Sqm.
-
-
-
GROUND FLOOR
83.07
-
1385.26
Providing, Fixing & Fitting Anti-skid CERAMIC floor tiles of 9mm thick of size 300mm x 300mm laid over 25mm Cement mortar (1:1) laid in proper slope and filling joints with epoxy grout (2mm) including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect as per the direction of the Engineer-in-charge. (SOMANY, KAJARIA, NITCO, VARMORA & RAK). Per Sqm.
-
-
-
GROUND FLOOR
13.01
-
1012.51
Providing, Fixing & Fitting Ceramic glazed tiles on wall of size 300mmx450mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect as directed by the Engineer-in-charge. (SOMANY, KAJARIA, NITCO, VARMORA & RAK). Per Sqm.
-
-
-
GROUND FLOOR
62.43
-
1169
Supplying, fitting and fixing of Industrial chequer tile on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete.
-
-
-
GROUND FLOOR
50.32
-
877.32
Drip course mould plaster 1:4 including necessary scaffolding curing etc complete at all depth and height as per direction of site in charge.
-
-
-
GROUND FLOOR
47.95
-
9.57
Supplying,fitting & fixing of 4"dia U.P.V.C. rain water pipe with necessary fittings and all complete.
-
-
-
GROUND FLOOR
25.6
-
212.19
Supplying,fitting and fixing of F.R.P. door with frame including cost of all materials labour T & P taxes etc ,complete.
-
-
-
GROUND FLOOR
3.25
-
3800
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost of labour, material, T&P etc. all complete.
-
-
-
GROUND FLOOR
157.83
-
276.24
Providing ,Fitting and Fixing of khondalite tile in wall on 12mm thick cement plaster 1:3 jointed with neat cement slurry mixed with pigments to match the shade of the tile in all complete.
-
-
-
GROUND FLOOR
33.44
-
678.44
BOUNDARY WALL
-
-
-
Earth Work in ordinary soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth.
76.4
-
186.92
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
8.48
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
8.49
-
3768.31
F.A brick masonary work in cement mortar (1:6) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN SUPERSTRUCTURE.
38.61
-
4165.55
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
51.09
-
4291.75
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
51.1
-
8910.76
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
232.25
-
103.22
Rigid and smooth centering and shuttering of RCC works including false works griders,beams,column including removal of form work at all depth and heights.
61.31
-
724.1
16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height.
181.16
-
191.04
12mm cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. All complete at all depth height for out side portion wall.
190.45
-
133.3
Providing and applying priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete.
371.6
-
58.31
Painting two coats of Anti-fugal weather coat water proofing paint including scaffolding and cleaning the surface before application.
371.6
-
70.76
SEPTIC TANK
-
-
-
Earth Work in ordinary soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth.
31.54
-
186.92
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
2.04
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
2.04
-
3768.31
F.A brick masonary work in cement mortar (1:6) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN FOUNDATION & PLINTH
9.73
-
4132.55
F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN FOUNDATION & PLINTH
0.15
-
4318.2
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
1.46
-
4291.75
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
1.3
-
8910.76
Rigid and smooth centering and shuttering of RCC works including false works roof slabs,Landing, balconies, projecting sun shades and chajja etc including dismantling them after casting including cost of materials etc complete.
12.64
-
422.08
16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height.
4.13
-
191.04
25mm thick A.S.Flooring with cement concrete 1:2:4 including punning using 12mm.size hard granite chips with cost conveyance, royality, watering & curing etc. complete.
6.04
-
288.76
12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. with cost conveyance, royality, watering & curing etc. complete.
23.88
-
150.53
Providing, fitting ,fixing of 4 cm size K.B brick khoa with proper laying and compaction etc including cost of all materials ,labour T& P etc complete.
2.48
-
370.93
INSPECTION CHAMBER
-
-
-
Earth Work in ordinary soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth.
9.95
-
186.92
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
1.33
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
1.33
-
3768.31
F.A brick masonary work in cement mortar (1:6) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.
IN FOUNDATION & PLINTH
4.47
-
4132.55
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
1.41
-
4291.75
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
0.71
-
8910.76
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
2.42
-
103.22
16mm thick cement plaster in cement mortar 1:6 including necessary scaffolding curing etc. all complete at all depth and height.
6.44
-
191.04
12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. with cost conveyance, royality, watering & curing etc. complete.
17.34
-
150.53
SITE DEVELOPMENT
-
-
-
Supplying, filling or Spreading of moorum by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge.
934.75
-
288.52
AREA CONCRETE
-
-
-
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
29.72
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
29.72
-
3768.31
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
39.65
-
4291.75
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
14
-
8910.76
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
49.05
-
103.22
Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials,bitumen and cement proportion ( 3:1) including cleaning before pouring 12 mm to 25 mm and 15 cm depth.
62.12
-
9.9
CC PAVER
-
-
-
Earth Work in ordinary soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth.
114.9
-
139.1
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
114.9
-
324.14
Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge.
753.83
-
899.68
Providing and Laying at near ground level factory made kerb stone of M20 graded ( 450 x 300 x 150 mm ) cement concrete in position to the required line,level and curveture,jointed with cement mortar 1:3 including making joints with or without groove(thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete etc. as per the direction of EIC.(Precast CC kerb stone shall be approved by EIC)
390
-
100
DRAIN
-
-
-
Earth Work in ordinary soil within 50m.Intial Lead and1.5m.Initial Lift including rough dressing and breaking clods to maximum 5cm.to 5cm. And Laying and Layers not exceeding 0.3m. In depth.
62.5
-
186.92
Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools,taxes etc all complete as per specification and direction of E.I.C.
6.25
-
324.14
Providing and Laying plain cement concrete 1: 4: 8 .( 1 cement : 4 sand : 8 stone Aggregate 40mm nominal size ) As levelling course in foundation and plinth etc. complete all depth and height.
6.25
-
3768.31
Providing and Laying reinforce cement concrete M-20 Grade20 mm nominal size HBG chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement) and direction of Engineer-in-charge.
26.68
-
4291.75
Cutting, bending , binding and placing in position of uncoated HYSD bar reniforcement as per drawing for R.C.C work including the cost of binding wire, steel,labour and tools etc.
18.8
-
8910.76
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
321.68
-
103.22
Rigid & smooth centering and shuttering false,levelled works and dismantling , then after casting including cost of materials complete for plinth band and column footing.
190.38
-
150.03
INTERNAL P.H.
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
-
-
-
40 mm dia Pipe (CPVC)
30
-
584.63
25 mm dia Pipe (CPVC)
45
-
300.61
20 mm dia Pipe (CPVC)
20
-
223.46
15 mm dia Pipe (CPVC)
3
-
171.12
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.
-
-
-
250 mm thick wall (10")
6
-
44.73
Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof.
-
-
-
Detail cost per I hole of size (15cmX15cmX25cm)
3
-
150.79
Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.
-
-
-
Detail cost per 1 meter
30
-
156.89
Providing and fixing wall face Unplasticised rigid PVC soil,waste and rain water pipes conforming to IS : 13295,TYPE-A including jointing with seal ring confirming IS: 5382,leaving 10 mm gap for theramal expansion, including testing as per specification etc. complete.110mm dia. rigid UPVC Single socket SWR Pipes
-
-
-
110mm dia. rigid UPVC Single socket SWR Pipes
40
-
346.66
Providing and Laying in trenches Unplasticised PVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.110 mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa).
-
-
-
110 mm dia rigid UPVC pipe ,Class-3 (0.60 mpa)
50
-
321.84
Providing and Laying in trenches Unplasticised PVC pipes conforming to IS : 4985-2000 and specials of the following outside diameter for all classes, including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.160 mm dia. rigid UPVC Pipes,Class-3 (0.60 mpa).
-
-
-
160 mm dia rigid UPVC pipe ,Class-3 (0.60 mpa)
52
-
614.17
Fixing floor traps of the following nominal diameter of outlet of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all complete as per specification.
-
-
-
110mm dia Inlet & Outlet floor traps PVC SWR type
2
-
215.52
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .
-
-
-
110 mm dia Single Junction with door PVC SWR type
2
-
283.06
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .
-
-
-
110 mm dia Plain Bend PVC SWR type
2
-
166.01
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .
-
-
-
110 mm dia Cowel PVC SWR type
3
-
53.63
Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .
-
-
-
110 mm dia Bend with door PVC SWR type
4
-
199.04
Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to JAQUAR MAKE of brand code CNS-WHT-553SN and of viteros china make seat cover fixing to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. ( With Seat and cover) (White Vitreous china wash down water closet E.W.C)
-
-
-
Water closet European type W.C pan with seat cover (JAQUAR MAKE)
2
-
3747.78
Providing and fixing controlled flush, low level cistern made of vitreous china conforming to CNS-WHT-353 N / 353 S / 755 ( JAQUAR MAKE ) with all fittings and fixtures complete.
-
-
-
Cistern 10 Ltr capacity , CNS-WHT-353N/353S/755 (JAQUAR MAKE)
2
-
2084.19
Fixing Wash Basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 / JAQUAR MAKE with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. ( Vitreous china flat back Wash Basin 550 x 400 x 200 mm ( CNS-WHT-801- JAQUAR MAKE )
-
-
-
Vitreous china flat back wash basin 550 x 400 x 200 mm (CNS-WHT-801-JAQUAR MAKE)
2
-
3503.35
Fixing of U.P.V.C Ball Valve of 25 mm diameter conforming to the following nominal sizes with wheel as per specification complete.(solvent welded with metal ball)as per the direction of EIC.
-
-
-
25 mm dia U.P.V.C Ball Valve
3
-
553.53
Fixing of U.P.V.C Ball Valve of 40 mm diameter conforming to the following nominal sizes with wheel as per specification complete.(solvent welded with metal ball)as per the direction of EIC.
-
-
-
40 mm dia U.P.V.C Ball Valve
1
-
1475.05
Fixing of Brass Screw-down Two way Short Body Bib Cocks ( Taps ) polished bright conforming to ( JAQUAR MAKE ) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head& high quality) ( CON-041KN-JAQUAR MAKE)
-
-
-
15mm dia Two way Short body bib cock (CON-041KN-JAQUAR MAKE)
2
-
1111.81
Fixing of Brass Screw-down Long Body Bib Cocks ( Taps ) polished bright conforming to ( JAQUAR MAKE ) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head& high quality)(CODE CON-107KN-JAQUAR MAKE)
-
-
-
15mm dia Long body bib cock (CON-107KN-JAQUAR MAKE)
5
-
1111.81
Fixing of C.P Screw-down Angular Stop Cocks conforming to of the following nominal sizes as per specification complete. (Deluxe Head& high quality) (A.R-2013,SL NO-3.2.16)
-
-
-
15mm dia C.P Angular cock
4
-
850.61
Fixing of Brass C.P Screw-down Consealed Stop Cocks conforming to of the following nominal sizes as per specification complete. (Deluxe Head& high quality) (A.R-2013,SL NO-3.2.16)
-
-
-
15mm dia C.P Consealed Stop Cock
2
-
894.19
Fixing Chromium Plated Brass Shower rose conforming to OHS-1985 (JAQUAR MAKE) including polishing all complete as per specification. (Deluxe Head & Heavy quality)
-
-
-
15o mm dia 15 - 20 mm C.P Brass Shower rose(OHS-1985 - JAQUAR MAKE)
2
-
1133.21
Fixing Chromium Plated Arm of 15mm or 20 mm inlet conforming to (Shower arm casted 190 mm long light body round shape for wall mounted showers with flange ( SHA - 477 - JAQUAR MAKE ) including polishing all complete as per specification.(Deluxe Head &Heavy quality)
-
-
-
15 mm x 225 mm long CP Shower arm (SHA - 477 - JAQUAR MAKE)
2
-
548.47
Fitting,Fixing of Health faucet conforming to ( Hand shower Health faucet ABS Body with 1.2 meter long PVC tube & wall hook (ALD-IVY-583 and ALD-BLK-583-JAQUAR MAKE) including polishing all complete as per specification.
-
-
-
Health Faucet ( ALD-IVY- 583 & ALD-BLK-583-JAQUAR MAKE )
2
-
860.34
Fixing Chromium Plated Soap dish holder complete with Chromium Plated brass brackets fixed to P.V.C plugs with Chromium Plated brass screws as per specification.(JAQUAR MAKE,BRAND ACN-1131N)
-
-
-
Soap dish holder(CAN-1131N-JAQUAR MAKE)
2
-
660.74
Fixing standard sized CP Glass-Shelf with Chromium Plated brass brackets and guard rails complete, fixed to wooden plugs with Chromium Plated brass screws as per specification.(600 mm long glass shelf-JAQUAR MAKE,BRAND ACN-1171N)
-
-
-
600x120 mm Glass shelf (ACN-1171N-JAQUAR )
2
-
1314.31
Fixing standard sized Towel rail of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Single Towel rail 600mm long)(ACN-1111NM-JAQUAR)(Heavy quality)
-
-
-
CP Towel Rail ( ACN-1111 NM-JAQUAR )
2
-
1333.91
Fixing standard sized Chromium Plated brass towel ring of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Round Towl Ring with round Flange)(ACN-1121 BN-JAQUAR)
-
-
-
CP Towel Ring (ACN-1121 BN-JAQUAR MAKE)
2
-
838.78
Fixing 600 mm x 450 mm Bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.(AR-2013,SL. NO.-3.4.26)
-
-
-
Bevelled edge mirrior
2
-
701.74
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the E.I.C .
-
-
-
Double Layer Cylinderical Vertical water storage tanks
2000
-
10.64
Supplying and installation of storage water cooler cum purifier on floor base having 3 syage advanced purification process (VU based both for cooling and purifying system).The storage tank capacity 80L,cooling capacity 60LPH,water flow rate 1.5 L,the body made up of ss304 and size 640X450X1350mm.MODEL-AG Green Pure Chill 80SS UV (HSN code-8418) (N.S.W.I)
-
-
-
COOLER CUM PURIFIER
1
-
78912
EXTERNAL P.H.
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of ownrigs with its accessories, tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).
-
-
-
a) Labour for drilling
150
-
621.23
Cost of P.V.C (A S T M SCHEDULE-80) pipe 200 mm dia (ASTM D-1785) Make-Oriplast, Hariplast
-
-
-
a)P.V.C ASTM (SCHEDULE-80) PIPES
70
-
1406.6
Lowering the 200mm dia size PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position,including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials,tools and plant etc.complete and keeping the top of the casing pipe threaded including plugging tubewells to prevent entry of foreign materials from above.
-
-
-
a)Lowering of 200mm dia P.V.C casing pipes
70
-
127.7
Cleaning and developing the 200mm dia tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
-
-
-
a) By DTH/Rotary Rig
1
-
4847.25
Submersible Pump Set with the cost of Motor
-
-
-
1.5HP Single phase(32 Mtr. Head) Model (GP121507)
1
-
11298.75
Control Panel Board (C&S)
-
-
-
Upto 3HP Single Phase
1
-
2925
HDPE Pipes 32/40 mm ( High Density PVC pipes inner dia 32mm, outer dia 40mm, 6Kg/ Cm Sqr. With IS specification
-
-
-
a) Detail cost per 1 meter
130
-
90.33
Steel Rope with PVC coated 6mm
-
-
-
a) Detail cost per 1 meter
200
-
26.7
Finolex/L&T/BCH Cable 4 Sq. mm( 3core copper wire flat cablePVC insulation)
-
-
-
a) Detail cost per 1 meter
160
-
112.98
Accessories like Nipple, Bore cover,MS clamp, Nut Bolt,Stainless steel nipple, Short piece, GI bend, Socket etc. complete.
-
-
-
a) Detail cost per 1 Set
1
-
961.54
Installation Charges including transportation
-
-
-
a) Charge per 1 Set
1
-
4200
INTERNAL ELECTRIFICATION
-
-
-
LT CABLE-Supply and laying of 1100 V grade, (XLPE/PVC) insulated aluminium conductor, armoured power cable as per specifications. The cables shall be laid in cable trenches or buried directly underground or on cable trays. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. The unit cost of the cable shall include clamps, fasteners, saddles, tags etc. as required for proper instllation.
-
-
-
4C x 16 Sqmm, Al. cable
50
-
191
4C x 6 Sqmm, Cu. cable
50
-
459.37
3C x 6 Sqmm, Cu. cable
50
-
288.75
END TERMINATION-Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
4 x 16 sq.mm
2
-
179.66
4 x 6 sq.mm(CU)
4
-
146.32
3 x 6 sq.mm
2
-
142.67
DISTRIBUTION BOARDS-Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.
-
-
-
4WAY 7 SEGMENT TPN MCB DB. CONSIST OG 63A TPN MCB as a Incomer , 40A DB RCCB as a sub incomer (3 Nos) and also 12 Nos Sp MCb as a outgoing.for LDB + PDB
1
-
17075.53
8WAY (2+ 6) SPN DOUBLE DOOR
2
-
4880.52
PERFORATED TYPE CABLE TRAY-Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays
-
-
-
Size of Cable Tray :150 mm x 50 mm
35
-
536
FITTINGD & FIXTURE-Supply Installation, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments.
-
-
-
Supply , installation testing and commissioning of 20Watts LED tube wall mounted/Surface type light fitting with all accessories as required.
22
-
954.84
Supply , installation testing and commissioning of 10Watts LED surface mounted type light fitting with all accessories.
6
-
1605.85
Supply , installation testing and commissioning of 10Watts wall mounted LED bulb with all accessories as required.
2
-
277.16
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge .(With fan Regulator)
4
-
2100
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Make-Havells/almonard/cromptron make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
2
-
2348
SOCKETS
-
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 6 /16 A modular socket outlet and 16 A modular switch, connections etc. as required.
5
-
675.47
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 6 A modular socket outlet and 6 A modular switch, connections etc. as required.
6
-
532.2
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1nos of 6 pin 16A modular socket outlet controlled by 1no of 16 A modular switch, connections etc. as required.-(UPS)
4
-
518.41
CIRCUIT WIRING
-
-
-
2 Runs of 2.5 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire with all necessary accessories as required. (lighting & small power)
110
-
123.93
2 Runs of 4 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 2.5 sq.mm multi strand FRLS insulated copper earth wire with all necessary accessories as required. (Raw Power)
85
-
159.82
POINT WIRING
-
-
-
Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia, 2mm thick rigid FRLS PVC conduit in a concealed / open conduit system. The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires, clamps, spacers, screws, etc. The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screws earthing of all points using third core of the cable, DB to switch control will be measured as circuit wiring. The switch boxes shall be flush mounted in brick wall. The point wiring shall be as per specification. Group B
22
-
870.79
Two light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-b
6
-
1107.03
Three light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
2
-
1343.27
PVC PIPES
-
-
-
Supplying and fixing of 20mm FRLS PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
110
-
102.55
Supplying and fixing of 25mm FRLS PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
85
-
107.15
UPS & INVERTER
-
-
-
Supply and Installation of 2KVA UPS with suitable batteries for 90 Mins battery backup
1
-
94550
MISCELLENOUS ITEMS
-
-
-
Rubber mat ISI approved 2m x 1m
2
-
1313
First aid kit( At Electrical Room)
1
-
1079
SERVICE CHARGES
-
-
-
Arranging the required details from - duely making the formalities and arranging service of the installation with the projected charges and arranging required approval from the required government Electrical Inspectorate and permission for the energising the HT installation works. Also this item should include charges towards arranging temporary power supply for construction and making payments, monthly bills and renewal/upgrading temporary power supply.
1
-
15000
EXTERNAL ELECTRIFICATION
-
-
-
LT CABLE-Supply and laying of 1100 V grade, (XLPE/PVC) insulated aluminium conductor, armoured power cable as per specifications. The cables shall be laid in cable trenches or buried directly underground or on cable trays. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. The unit cost of the cable shall include clamps, fasteners, saddles, tags etc. as required for proper instllation.
-
-
-
3.5C x 70 Sqmm, Al. cable
50
-
480.68
END TERMINATION-Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
3.5C x 70 sq.mm
2
-
512.32
EARTHING
-
-
-
Supply, erection and testing of GI Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia. GI pipe, 600 x 600 x 6mm size GI plate and 1 run of 40 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For body Earthing)
1
-
5245.09
Supplying and laying 46 mm x 6 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.
40
-
153.79
Providing and fixing 8 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required
40
-
97.6
FITTINGS & FIXTURE
-
-
-
Supply Installation, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments.
-
-
-
Supply & installation of 80W LED Streetlight Luminaire with a nominal system lumen output of 8000 lumens and a minimum system efficacy of 100 lm/W. System wattage should not exceed 72W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 5700K and CRI of 70. Driver of the luminaire shall have PF0.95. Product should be able to withstand surge protection up to 10 KV. The luminaire housing should be made of LM6 high pressure die cast Aluminium & toughened glass front cover. Product should be IP66 rated. Similar to Wipro make Skyline Neo "LR07-981-XXX-57-XX" (OR) EQUIVALENT MAKE.
13
-
8926.62
Supply & installation of 9.0 mtr height Octagonal poles with Mat Finish with foundation bolt and nut etc with smart pack terminal Box (Mounting inside the base compartment of power. The cost is inclusive of 5Mtrs 8SWG wire. Make :BAJAJ / VALMART/WIPRO/UTKARSH/CG
13
-
19198.93
1.5 mtrs Single cross Arm bracket suitable to the above pole
13
-
2406.79
MISCELLENOUS ITEMS
-
-
-
Supply and installation of HT/LT Danger board as required by the CEA/ CEIG authorities.
1
-
962
Supply and fixing of HT/LT cable route indicator (cast iron) made out of MS flat and angle iron
2
-
1628
Shock treatment chart laminated( At Electrical room and LMR)
1
-
844
Providing and laying of 600mm (L) x 600mm (W) x 600mm (D) Inspection Chamber with pre cast Cover and all necessary accessories as required
2
-
12732
Providing and laying of RCC Hume pipe(NP2) for Communication cables. Cost to include RCC collar and necessary civil works like jointing of hume pipes with mortar as required.(Excavation & Back filling cost not included) - For Communication & Earthing-200 mm Dia RCC Hume pipe
10
-
987
PA SYSTEM
-
-
-
30 Watts Outdoor Horn Speaker ( Make- Audio trac/ Sonodyne)
1
-
6200
30 WATTS Superb Sound Wall Mount Speaker ( Make- Audio trac/ Sonodyne)
1
-
6600
10 Watts Wooden Box Speaker ( Make- Audio trac/ Sonodyne)
1
-
1360
6 Watts Box Speaker ( Make- Audio trac/ Sonodyne)
1
-
1300
60W RMS Mixer Amplifier 3 mic 2 aux 100V 70V and 4ohms balanced mic ( Make- Audio trac/ Sonodyne)
1
-
18400
RMS120W Class D Mixer Amplifier with MP3 USB SD TUNER and bluetooth built in MIC1 and Line 1 input recorder function 1EMC input 2AUX input 4 Phonejack MIC input 1U Rack mount with 100V 4 to 16 ohm output ( Make- Audio trac/ Sonodyne)
1
-
29400
16 GB USB Pen Drive ( make- Transcend/ HP)
1
-
400
TABLE TOP MICROPHONE (Make- Ahuja/ Audio Trac)
1
-
5500
Supply and laying of 2.5 sq. mm music cable in ISI marked Medium PVC Pipe using Saddle and Screw with all accessories per running metre of cable used. ( Make- Finolex / Polycab/ Sudhakar / AKG)
70
-
115
Supply and laying of 3 Core 1 sq.mm. power Cable in ISI marked Medium PVC Pipe using Saddle and Screw with all accessories per running metre of cable used.(Make- Sudhakar / AKG)
15
-
65
Supply and installation of 1x5 Amps Switch & Socket with Surface mount Box ( AnCHOR/ Cona)
2
-
500
System installation, testing and commissioing charges.
1
-
10000
SINAGE
-
-
-
Providing and fixing of signage made out of stainless steel (SS304 grade) letters of size 300X300 of depth 50 (N.S.W.I)
10
-
800
Digital display board (Logo) of round size-4'-0" dia.
1
-
65000
FIRE FIGHTING
-
-
-
FIRE EXTINGUISHERS-(make-Fire Tipsintime/Fire Shield)Providing and Fixing carbon dioxide type Fire Extinguisher -a) 4.5 kg. capacity
2
-
8500
Providing and fixing ABC fire extinguisher fixed with bolts, nuts and washers complete in all respects.a) 6 kg. capacity
5
-
3200
EXIT SIGNAGE With Evacution System-SITC of Self illuminated Autoglo exit Signs - Fire Exit with one side arrow size.300x150mm.
2
-
1500
FURNITURE
-
-
-
CABIN TABLE WITH DISCUSSION TIP SIZE : 2400X900X750MM HT, SIDE TABLE: 1500X450X750, Table Top: 25mm Thick pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Support:25mm thick pre laminated gable ends. Wiremanagement: 400mm alluminium flip up with metal cable tray with vertical wire entry.Office desk
2
-
49582
Anatom Medium Back Chair, Mesh Back, With Headrest,Single lock Synchro Mechanism,Adjustable Lumber support, One Way Adjustable Arm(Height), Nylon Base-Executive Chair
6
-
12346
Supplying, fitting and fixing of Stainless steel seating benches etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect-Steel 4 seater waiting chair
2
-
18000
Providing & fixing of Wardrobe Sliding type of size (1800x600x2000) Kismo make : Maple.
2
-
80892
LAND SCAPING
-
-
-
Surface dressing of the ground including removing Vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish lead upto 50m (at least 5m away from the dressed area). (Provisional)
120
-
150
Supplying and stacking & speareding of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm th. (Provisional)
23
-
500
Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment). (Provisional)
23
-
800
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation, breaking clods and fine dressing the ground including all materials and labour complete as per direction of Engineer-In-Charge. (Provisional)
120
-
100
Provision of soft surfaces such as grass lawns in between the open spaces. (Provisional)
60
-
250
Planting of Ornamental spp (30"x30", 6'x7' Height Poly pack.) Digging pits removing all unserviceable materials and dumping outside the working area as shown by the engineer incharge .Supply and filling the same pits with good soil and well decomposed cow-dung manure mixture of ratio 4:1 and required quantites of fertilizer and pesticides and supply and planting with specified saplings as per the instruction of engineer in charge and taking up maintenance work like watring ,weeding apply of fertilizer, pesticides etc including cost of men, matrial , tools,tackles all complete.
10
-
12000
Slow growing ornamental species. (Provision)(i.e. Asoka (sarca asoka), Baula (mimussops elengii), Bottle brush (callistemin lanceolatum), Neem (azadirchta indica), Karanj (pangamea pinnata), Debdaru (polyalthia longifolia), Aonla (embelica officinalis), Sunari (cassia fistula) & Kanchan (bauhinia variegate)
10
-
600
Shrub species (i-Local species).(Provision)(i.e. Mandar (hibiscus rosasinesis), Tagar (tabarnae montana coronaria) , Kaniar (thevetia spp), Karabira (nerium oleander)
10
-
450
Creepers/ Climbers/ Ground covers.(Provision)(i.e. Jui(jasminum offcinale), Jai (jasminum pubescence), Madhumalati (quuisquilis indica)
6
-
500
Supplying fitting fixing of UPVC (SCH-80) pipe including all cost. (Provision)
-
-
-
i) 25 mm dia
12
-
79.9
ii) 40 mm dia
12
-
129.8
Fitting Fixing of PVC Ball Valve. (Provision)
-
-
-
i) 25 mm dia
2
-
373.52
i) 40 mm dia
1
-
982.58
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Provision)
-
-
-
15mm dia CP Bib cock (Plaza/zigma/Amber/Delux Make) (Provision)
2
-
500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements