Odisha State Police Housing And Welfare Corporation Limited Tender
... More
The OPHWC has issued a formal invitation for competitive bids for the Odisha State Police Housing And Welfare Corporation Limited project, for Constn. Of Common Facililities Centre Of Excellence On Silver Filigree At Cuttack in Bhubaneswar, Odisha, with an estimated contract value of Rs. 6,99,34,564. The bid opening date for this tender is 14-05-2025 and the last date for bid submission is 29-05-2025. Interested bidders for Odisha State Police Housing And Welfare Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Odisha State Police Housing And Welfare Corporation Limited - OPHWC Tender
Civil And Construction
Eprocure
Opening Date14 May 2025
Closing Date29 May 2025
Tender Amount₹ 6,99,34,564
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The eligible classes required by a bidder to participate in the tender are 'Super Class', 'Special Class', and 'A Class' contractors.
Bid Capacity
... View More
The formula for bid capacity is: 'C' = A x N x 2 - B, Where, A = Maximum value of Civil Engg. Works executed in any year in preceding 5 yrs. N = No. of year prescribed for completion of works for which bids are invited. B = Value of works in hand at present price level.
Technical Capacity
... View More
The bidder is required to have prior experience in execution of Building works with Mechanical, Electrical, and Plumbing (MEP) components. The experience should be in similar nature of building works with each project costing not less than or equal to 80% of the bid value. The bidder should have satisfactorily executed three similar nature of works each costing Rs. 2,79,73,825.60 (40% of bid value) or more, or two similar nature of works each costing Rs. 3,49,67,282.00 (50% of bid value) or more, or one similar nature of work costing Rs. 5,59,47,651.20 (80% of bid value) or more in the current or last five years. Additionally, the bidder should have experience in similar nature of building works with MEP components, with each project costing not less than or equal to 80% of the bid value. The bidder can submit documentary evidence of either one project (worth 10 marks) or two projects (worth 20 marks), with a maximum of two projects considered during the evaluation process. The required prior work experience also includes completion of a total value of Civil engineering construction work in the last 5 years. The bidder should provide a certificate from a Chartered Accountant for this. The values mentioned are: - Rs. 2,79,73,825.60 (40% of bid value)
- Rs. 3,49,67,282.00 (50% of bid value)
- Rs. 5,59,47,651.20 (80% of bid value) The percentages mentioned are: - 40%
- 50%
- 80%
Costs
EMD
₹ 6,99,300Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_OSPHW_113388_1Bid Award Id
ViewTender No
03/OPHWC/2025-26Tender Authority
Odisha State Police Housing And Welfare Corporation Limited ViewPurchaser Address
-Website
http://http://www.ophwc.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
50000020
12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height.
Ground Floor
156
183
28591.68
... More
50000021
6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.
Ground Floor
916.58
206
189319.59900000002
... More
First Floor
460.08
211
97527.75839999999
... More
Second Floor
316.8
217
68926.176
... More
50000022
16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.
Ground Floor
471.28
265
125256.79839999999
... More
First Floor
428.71
272
116909.21699999999
... More
Second Floor
171.72
279
48052.4076
... More
50000044
"Providing anti-termite treatment including labour and materials etc complete. "
Ground Floor
493.66
35
17278.100000000002
... More
50000058
"Supplying,fitting & fixing Marbles in floors,treads rise and landing on 25mm. thick bed of cement mortar 1:1 joined with neat white cement slurry including rubbing, polishing etc. complete.(for 1 sqm.) "
Ground Floor
580.56
1553
902021.8775999999
... More
50000488
Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and Plinth
Ground Floor
74.88
5419
405783.7056
... More
50000490
Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.
Ground Floor
119.05
5452
649074.8859999999
... More
First Floor
106.7
5826
621715.292
... More
Second Floor
10.2
6257
63827.52
... More
50000964
Providing and Fixing of Granite Flooring in floors, Treads and Landings over 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the Granite including cleaning etc.
Ground Floor
37.85
2301
87106.0975
... More
First Floor
29.75
2330
69343.68000000001
... More
50001152
Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge.
Ground Floor
875.57
6250
5472312.5
... More
First Floor
212.25
6250
1326562.5
... More
Second Floor
314.83
6250
1967687.5
... More
50001242
"Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying and layers not exceeding 0.3m. in depth. "
Ground Floor
231.06
199
46117.265400000004
... More
50002693
Providing, fitting fixing of Hydrolic Door Closer complete with all material & all labour T&P etc as per specification approved by the Department & as per direction of EIC.
Second Floor
1
2353
2353.81
... More
50004846
Single under reamed bore compaction pile foundation with R.C.C. M20 using 12mm size black hard granite (crusher broken)stone chips including cost of boreholes but excluding cost of M.S. rod/Tor steel and labour chrages for cutting, bending and binding of steel. 375 mm dia and 8.0 metre long.
Ground Floor
188
11857
2229168.64
... More
50005298
Supplying all materials and labour for making Full Partition wall with 10mm thick Toghfend glass having 450mm down height partition wall above false ceiling using 9 mm thick ply of 75mm thickness as per approved design and specifications,above and down partition is to be fixed with glass of 10mm thick Tougfen glass, edges of glass is to be well polished , fixed with necessary hardware, including cost, coveyance, loading, unloading and taxes of all materials,cost of all labour,scaffolding, staging (if required) for the works etc. complete in all respect as directed by the Engineer-in-charge.[N.S.W.I]
Ground Floor
15.5
647
10028.81
... More
50010026
Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI]
Ground Floor
268.5
5447
1462669.86
... More
First Floor
115.21
5447
627613.3876
... More
Second Floor
98.38
5447
535930.9528
... More
50010360
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)
Ground Floor
103.02
13790
1420657.1322
... More
First Floor
62.19
15113
939939.0381
... More
Second Floor
47.52
16636
790564.104
... More
50010372
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS)
Ground Floor
22.44
18193
408251.81760000007
... More
First Floor
14.27
20177
287931.0699
... More
Second Floor
11.47
22459
257608.62980000002
... More
50010396
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)
Ground Floor
59.94
6644
398262.9384
... More
50010408
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM)
Ground Floor
4.76
14221
67694.4828
... More
First Floor
2.23
15610
34810.5676
... More
Second Floor
0.56
17207
9635.92
... More
50010432
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE)
Ground Floor
3.27
13038
42634.26
... More
First Floor
3.27
14249
46594.4589
... More
50010444
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM)
Ground Floor
63.5
7508
476812.61
... More
50010446
Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS)
Ground Floor
53.33
15808
843053.4391999999
... More
First Floor
30.11
17434
524963.3335
... More
Second Floor
25.83
19305
498659.5151999999
... More
50010470
Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)
Ground Floor
563.52
9006
5075168.188800001
... More
First Floor
147.24
9039
1330946.532
... More
Second Floor
114.48
9074
1038798.3888
... More
50010572
Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500)
Ground Floor
1387.86
81
113540.8266
... More
First Floor
888.79
83
74480.602
... More
Second Floor
488.52
85
41944.3272
... More
50010584
Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900)
Ground Floor
156
81
12762.36
... More
First Floor
117
85
9960.21
... More
Second Floor
78
88
6911.58
... More
50010596
Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC).
Ground Floor
156
132
20609.160000000003
... More
First Floor
117
135
15878.070000000002
... More
Second Floor
78
139
10880.220000000001
... More
50010608
Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean).
Ground Floor
1387.86
122
169957.3356
... More
First Floor
888.79
124
110761.0098
... More
Second Floor
488.52
126
61968.761999999995
... More
50010620
Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY)
Ground Floor
1387.86
117
163698.087
... More
First Floor
888.79
119
106494.81779999999
... More
Second Floor
488.52
121
59477.31
... More
50010632
Finishing wall surface of walls with Acrylic Exterior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials,labour T&P etc complete.(N.S.W.I)EXTERIOR ACRYLIC WALL PUTTY- BIRLA WHITE/JK WALL PUTTY
Ground Floor
156
117
18400.2
... More
First Floor
30
121
3632.4
... More
Second Floor
20
124
2487.4
... More
50010644
Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel).
First Floor
16.07
191
3079.9762
... More
Second Floor
3.78
196
742.8456
... More
50010656
Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink)
First Floor
16.07
83
1346.5053
... More
Second Floor
3.78
85
324.513
... More
50010668
Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green
Ground Floor
55.05
1688
92926.05149999999
... More
First Floor
46.95
1688
79253.0085
... More
Second Floor
6
1688
10128.18
... More
50010680
Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej).
Ground Floor
6.62
6961
46087.5132
... More
First Floor
17.01
6961
118421.23860000001
... More
50010692
Providing and Fixing of ISI marked 30 mm thick Flush Door Shutters (Double leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 8 Nos SS butt Hinges (125mm x 85mm x 5.5mm), 4 Nos SS Tower Bolt(250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 2 No Floor type double doorstopper, 4 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 2 Nos. Back Buffer with all materials, adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Ply (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej).
First Floor
7.56
7453
56351.6352
... More
Second Floor
3.78
7453
28175.8176
... More
50010704
Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej).
Ground Floor
6.3
7039
44351.811
... More
First Floor
3.78
7039
26611.0866
... More
50010741
Providing, Fixing and Fitting Ceramic glazed tiles on wall of size 300mmx450mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T and P required for the work, etc. complete in all respect. [NSWI] Tile make:-VARMORA/ NITCO / RAK
Ground Floor
205.45
1007
207081.273
... More
First Floor
110.87
1028
113975.4687
... More
50010753
Providing, Fixing and Fitting Anti-skid vitrified floor tiles of size 300mm x 300mmx9mm laid over 25mm thick Cement mortar (1:1) laid in proper slope and filling joints with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T and P required for the work, etc. complete in all respect. [NSWI] Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout).
Ground Floor
55.52
898
49874.72640000001
... More
First Floor
9.94
911
9061.900399999999
... More
50010767
Supplying, Fitting and Fixing of 10 mm thick Digital Glazed Vitrified Tile on floor of size 600mm x 600mm of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T and P etc. required for the works all complete (For new work only). [NSWI] Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout).
First Floor
434.53
1282
557197.8189999999
... More
Second Floor
315.63
1296
409154.32529999997
... More
50010815
2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete.
Ground Floor
185.9
612
113926.956
... More
First Floor
117.97
652
76927.0573
... More
Second Floor
316.84
697
220910.35319999998
... More
50010827
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL.
Ground Floor
94.3
520
49065.23299999999
... More
First Floor
94.3
520
49065.23299999999
... More
50010851
Providing and fixing of 12mm thick toughened glass door for glass partition with patch fitting, the glass edges will be high polish for all the sides with cutting hole for top patch, bottom patch ,lock and 12 inch SS handle. The patch fitting will be SS 304 grade with high quality floor spring make as per ISI certification. The price including of lifting of glass up to 5th floor, transportation and installation. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings :-Godrej.
Ground Floor
1.58
12729
20112.9892
... More
First Floor
16.38
12729
208513.14119999998
... More
50010863
Supplying all materials and labour for making Full Partition wall with 10mm thick Toughened glass as per approved design and specifications. Edges of glass is to be well polished, fixed with necessary hardware, including cost, conveyance, loading, unloading of all materials, cost of all labour, scaffolding, staging (if required) for the works etc. complete in all respect. [NSWI] All Glass work:- Saint-Gobain/AIS (ASAHI), Hard ware fittings –Godrej.
Ground Floor
8.19
6979
57159.811799999996
... More
First Floor
143.79
6979
1003542.0438
... More
50011719
Carriage of excavated material (Rough stone,Gravel, earth) etc by ten ton truck incuding loading and unloading upto 5 km distance.
Ground Floor
161.74
276
44641.8574
... More
50012212
System Aluminum Casement System Door: Double Leaf Swing double glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 21mm Clear Toughend DGU (6mm outer + 10mm Air Gap + 5mm inner) Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD)
Ground Floor
20.16
18100
364896
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements